Related
I am rooted on OC3 with KNOX intact. Is there currently a way to upgrade to OG9 while keeping root and not tripping KNOX?
My main motivation is in using Samsung Pay.
With Android pay, I can uninstall superuser (unroot) and Android pay works. then if i need to do something that requires root access, i can re-install SU and do what i need. will something similar work with Samsung Pay?
will i simply be able to sideload the Samsung pay APK and Framework APK? or will i have to upgrade to OG9? is there a way to upgrade to OG9 and keep root & KNOX?
what are those of you in my same situation planning on doing?
thanks!
In the same boat. **** up the creek without a paddle.
stanfna said:
I am rooted on OC3 with KNOX intact.....
what are those of you in my same situation planning on doing?
Click to expand...
Click to collapse
Same as you: Stock (OC3), rooted, Knox intact.
I had successfully installed Android pay. Disabled root with SuperSU. Activated my cards. Re-enabled root. And I was able to make android pay purchases! I was a happy camper....for about 1 day.
Now every time I go to pay I get the message: "This card cannot be used right now." I have tried everything I can think of short of permanently removing root or removing SuperSU itself: different cards, disabling root, rebooting, etc
I was just in the Play Store looking at root cloaking. Has anyone had any success with non-xposed root cloaking? I was looking at the app: Rootcloak Plus / Cydia Substrate. Don't know if that would work on our devices or if that would screw up knox. Anyone know anything about it? I don't have an up-to-date backup so I'm not going to try it just yet.
Here is to hoping someone finds a solution....
do yo have a link for the samsung pay APKs? all the ones i have seen on XDA will not install.
also, did you install the framework or just the samsung pay APK?
thanks!
Samsung pay finally showed up for me on Google play. It downloaded and installed. When I open Samsung pay I get a message that says a software update is required. When I click the update button, Samsung pay closes and I get a pop up that says unfortunately Samsung pay had stopped. Will installing the Samsung pay framework fix this?
From all I've seen, you have to be on OG9 for Pay to work. You could try installing the framework as well, and see if that works. It would be installed automatically in OG9.
for me, samsung pay was more important than root. it was one of the main reasons i got the phone as i tend to forget my wallet a lot...lol. as mentioned by others, when trying to install samsung pay when rooted, it would ask to update. so i unrooted via SU and updated to OG9. as of now, samsung pay is installed and working. however, does any know if i can still get root? i read somewhere that you just have update the ping pong root app and reapply. however, i've also read that ping pong root will not work with 0G9.
pwr2wh8 said:
for me, samsung pay was more important than root. it was one of the main reasons i got the phone as i tend to forget my wallet a lot...lol. as mentioned by others, when trying to install samsung pay when rooted, it would ask to update. so i unrooted via SU and updated to OG9. as of now, samsung pay is installed and working. however, does any know if i can still get root? i read somewhere that you just have update the ping pong root app and reapply. however, i've also read that ping pong root will not work with 0G9.
Click to expand...
Click to collapse
There is currently no way to get root on OG9.
OE2 is the last rootable firmware version.
Is there anyway to downgrade OG9 to OE2? Accidently upgraded..
I apologize if this is posted elsewhere in the forums, or if it's incorrectly placed, But I figured it may be useful to some.
after hours of looking and browsing the internet, I finally found a way to root my Samsung Galaxy J1 by Verizon.
You will need the following: Samsung Galaxy SM-J100VPP non rooted
Kingoroot application OR
Kingroot application.
Step 1) Go to your dialer and enter *#*#759#*#* or install an app called Hidden Menus and look for "Rlz Debug UI..."
Step 2) turn OEM Mode ON
Step 3) Use KingoRoot or King Root and click root.
This will work on devices that have received the OTA update from VZW.
-----------------------------------------------------------------------------------------------------------------------
If anyone knows of a CWM Recovery or Custom Roms For this device, I would very much appreciate a link. if not, I will have to try to port it myself. Thanks in advance.
webag.youtag said:
I apologize if this is posted elsewhere in the forums, or if it's incorrectly placed, But I figured it may be useful to some.
after hours of looking and browsing the internet, I finally found a way to root my Samsung Galaxy J1 by Verizon.
You will need the following: Samsung Galaxy SM-J100VPP non rooted
Kingoroot application OR
Kingroot application.
Step 1) Go to your dialer and enter *#*#759#*#* or install an app called Hidden Menus and look for "Rlz Debug UI..."
Step 2) turn OEM Mode ON
Step 3) Use KingoRoot or King Root and click root.
This will work on devices that have received the OTA update from VZW.
-----------------------------------------------------------------------------------------------------------------------
If anyone knows of a CWM Recovery or Custom Roms For this device, I would very much appreciate a link. if not, I will have to try to port it myself. Thanks in advance.
Click to expand...
Click to collapse
Can this be confirmed? I also have looked a bit and haven't found much else.
Thanks in advance.
Working
Tested and working on my own device.
I tried what you listed and it didn't work for me at first but that with with Kingo Root. I tried with Kingroot and it worked Thanks!
solve auto answer income calls problem on samsung galaxy j100VPP VERIZON
Dear friends, i bought this samsung in USA from Verizon and use to work well, them i moved to Venezuela where my family lives so i tried to use my Samsung Galaxy J100VPP from Verizom with a company here in venezuela wich name is movilnet, the phone works but when someone call me the phone auto answer the income call. i dont know how to solve this, so i decided to rooted and it works with kingroot , but my phone still auto answer the income calls. please help me i have tried everything.
as you know the software its lollipop 5.0.2 from Verizom USA
natorpro said:
Dear friends, i bought this samsung in USA from Verizon and use to work well, them i moved to Venezuela where my family lives so i tried to use my Samsung Galaxy J100VPP from Verizom with a company here in venezuela wich name is movilnet, the phone works but when someone call me the phone auto answer the income call. i dont know how to solve this, so i decided to rooted and it works with kingroot , but my phone still auto answer the income calls. please help me i have tried everything.
as you know the software its lollipop 5.0.2 from Verizom USA
Click to expand...
Click to collapse
Are you using a Bluetooth or any sort of headpiece?
Bunk help
I've tried the king method and odin method and still can't root this J100VPP.
I even tied to brick it nothing. The king method stops at 90 percent. I'm lost, I need a new idea.
I have the exact same phone and I was able to root with kingroot.net. If I remember correctly I had to do it two times before it was successful.
Patience
p2pgogo said:
I've tried the king method and odin method and still can't root this J100VPP.
I even tied to brick it nothing. The king method stops at 90 percent. I'm lost, I need a new idea.
Click to expand...
Click to collapse
It stops at 90% for 5 to 10 minutes then successfully roots.
Help
natorpro said:
Dear friends, i bought this samsung in USA from Verizon and use to work well, them i moved to Venezuela where my family lives so i tried to use my Samsung Galaxy J100VPP from Verizom with a company here in venezuela wich name is movilnet, the phone works but when someone call me the phone auto answer the income call. i dont know how to solve this, so i decided to rooted and it works with kingroot , but my phone still auto answer the income calls. please help me i have tried everything.
as you know the software its lollipop 5.0.2 from Verizom USA
Click to expand...
Click to collapse
I had a Samsung Galaxy J100VPP from Verizon, an I move to Guatemala, and a rooted the phone, and I need use the phone in Guatemala with the Guatemalan Companies, the companies are Tigo, Claro and Movistar, what you did to put in work your phone in Venezuela??? Help Please
Old thread but I just got root using Kingroot 4.9.5 to root SM-J100VPP with andriod 5.1.1 confirmed and working.:good:
Working for me but afraid to update it with the chainfire one want exposed on this
It worked for me with Kingroot and Hidden Menus but after optimizing with Kingroot and uninstalling a few bloatware apps, it crashed, restarted (with the open lock icon, "custom" underneath, now on startup) and no longer has root access in Root Checker, it saying "Root access is not properly installed on this device".
I think it should be noted that Kingroot originally told me root access was unavailable but below also said "Root strategy available, just try it", so I did. Now it seems that wasn't permanent. I won't attempt it again unless one of you has a lead that requires me to.
And how do I know if I got the OTA update from VZW?
Anyone else have this problem?
I am a greenhorn with this stuff. This is my first root attempt. Please be specific when directing me somewhere if needed.
I used Kingo root and after a few tries it worked. I like this better because I can use tasker with the build in Superuser (after build prob mod of course and for some reason supersu). I was not able to get tasker to work with King root.
custon recovery samsung j1 verizon
Hi, I need to know if there is already a modified recovery for the samsung j1 from verizon, I have a modified rom but I have not run it on the device for lack of modified recovery, I'm from venezuela thanks for your help
None yet that I know of.
Sent from my SM-N915V using XDA-Developers mobile app
I have followed the directions to rooting it with kingo root 4 times and even tried it with kingroot twice and still not successful. I have a SAMSUNG-SM-J100VPP. Please help...
Bamfmav said:
I have followed the directions to rooting it with kingo root 4 times and even tried it with kingroot twice and still not successful. I have a SAMSUNG-SM-J100VPP. Please help...
Click to expand...
Click to collapse
I have had no luck as well. Tried Kingroot and Kingoroot multiple times and both fail.
AThiker said:
I have had no luck as well. Tried Kingroot and Kingoroot multiple times and both fail.
Click to expand...
Click to collapse
im not able to enter the hidden menu. methods i have tried request root and i dont have it. which apk is it?
el_venga said:
im not able to enter the hidden menu. methods i have tried request root and i dont have it. which apk is it?
Click to expand...
Click to collapse
The hidden menus is an app you can download from the play store to enable Rlz Debug UI to OEM mode. I have used Kingroot (which is the closest i get to rooting the phone) and Kingoroot. Just go to their sites and download the APK.
Hello,
someone else having problem to connect Gear S3 with S10 (or other?) after last update?
I cleaned cache and data in Samsung Wear app, uninstalled and reinstalled app and related plugin, restored Gear S3, but nothing.
It can connect to bluetooth... only 1 second and stopped.
I tried to connect it on my wife's S8 and works.
Hi.
I have a similiar issue with my S9+.
Pairing works, but I get no connection to the watch.
I tried resetting the watch and reinstalling the gear apps.
No issue with my mi band though, so bluetooth on the phone seems to work fine.
Gesendet von meinem SM-G965F mit Tapatalk
I have the same issue! I thought I'm the only one.
Tried to connect with s8 and it works too
Damn... Samsung is getting worse and worse!
Searching a solution!
Weird. CTC9 firmware in my Note 10+ and no problem at all
Found a weird solution - I paired with a friend's galaxy watch active 2, after that I successfully paired with my gear s3
****! I have only my Gear S3.
Neither with new firmware i solved my problem...
Gear S3 works on S8 but not on S10 anymore.
I made factory reset, i made a wipe cache and data... nothing.
i discovered that root is the problem with last firmware.
If i reinstall original AP firmware, i can make pairing with Gear S3... if i install firmware with magisk_patched i can't connect smartwatch.
Someone have same problem?
S3 frontier unable to connect to S10
same problem here, Gear S3 frontier no longer connects to rooted GalaxyS10 on latest firmware patched by Magisk..
Does connect to GalaxyS9 on latest firmware patched by Magisk, but this has no Health App... killed by Knox...?
Suspecting Magisk here...
ierkens said:
same problem here, Gear S3 frontier no longer connects to rooted GalaxyS10 on latest firmware patched by Magisk..
Does connect to GalaxyS9 on latest firmware patched by Magisk, but this has no Health App... killed by Knox...?
Click to expand...
Click to collapse
Same here. Note 10+ 5G, Magisk rooted prior to CTC9 firmware update and S3 Frontier will no longer connect. I've just factory reset and updated to CDT1 without root and the watch connected. I'm just about to root it and see if it'll connect. If it doesn't, then it's definitely a Magisk issue.
Came across this thread because I have the same issue. Rooted Note 10+ + Gear S3 Frontier.
Tried every other solution online, except for flashing stock ROM to make them pair.
Damn it... I take it no one found another way?
Ivymike52 said:
i discovered that root is the problem with last firmware.
If i reinstall original AP firmware, i can make pairing with Gear S3... if i install firmware with magisk_patched i can't connect smartwatch.
Someone have same problem?
Click to expand...
Click to collapse
Same problem here, did you find a solution?
So ive finally got my note 10+ 5g connected to my active watch 2 after rooting, took me a week to figure it out haha im well out of practice flashing and modding android. So i was rooted using this method for samsung devices https://topjohnwu.github.io/Magisk/install.html#patching-images and i could connect every bluetooth device except my watch, after a week of trying to hide watch apps using magisk and magisk modules nothing worked, until i tried flashing compete stock and connecting my watch worked 1st time, so i thought id try patching twrp with magisk and flash that and BOOOOOM! Success!! Rooted, watch connected and twrp intalled, Happy is an understatement. Hope i can help some people out.
Hi guys I'm new here but have an old s7 edge sm g935f , it was rooted once by the previous owner for pokemon go spoofing which doesn't work anymore so I flashed back to stock, phone isn't rooted anymore but no Samsung apps will work I really use pass and health often but they're saying I am rooted. Is there any fix for this? Sigh.
Your efuse is broken after last root. Can not be fixed with Stock rom. Think Samsung Pas will never work...
User_99 said:
Your efuse is broken after last root. Can not be fixed with Stock rom. Think Samsung Pas will never work...
Click to expand...
Click to collapse
dang, so there isn't anything that i can do ?
Nivi1993 said:
Hi guys I'm new here but have an old s7 edge sm g935f , it was rooted once by the previous owner for pokemon go spoofing which doesn't work anymore so I flashed back to stock, phone isn't rooted anymore but no Samsung apps will work I really use pass and health often but they're saying I am rooted. Is there any fix for this? Sigh.
Click to expand...
Click to collapse
i think you should go for any samsung stock custom rom like https://forum.xda-developers.com/s7-edge/development/rom-floydq-v1-0-t4085667
Best rom you can't ask more just flas it with magisk
And hide every application who detect root you can also run any bank apps with magisk hide
Thanks
I ordered it, I have note 20 utra ( HK Version ) rooted
I had read a while back that if you setup Samsung pay directly from watch, it works?
Can I setup Spay wth a non-rooted phone, have it work on the watch then go back to the rooted phone?
Gpay works on my phone, will it work on the watch
Will any of the health apps work
inningsdefeat500 said:
I ordered it, I have note 20 utra ( HK Version ) rooted
I had read a while back that if you setup Samsung pay directly from watch, it works?
Can I setup Spay wth a non-rooted phone, have it work on the watch then go back to the rooted phone?
Gpay works on my phone, will it work on the watch
Will any of the health apps work
Click to expand...
Click to collapse
I don't have the watch4 yet but on watch3, I was able to use it without my rooted phone and no, you can't configure things on a device and change the device, because every time the device is changed, the watch resets...
Root on phone has no effects on the watch, rooted phone will affect the apps installed on it, for example "this application can't run on rooted devices"
As for gpay, as I recall, I believe someone did use gpay instead of Samsung pay
Thanks, so as u say.it will say cannot run app because its rooted but does this apply to the phone or watch too
inningsdefeat500 said:
Thanks, so as u say.it will say cannot run app because its rooted but does this apply to the phone or watch too
Click to expand...
Click to collapse
A rooted phone won't be able to connect by Bluetooth to the watch. But there's a patch to make it work.
EDIT : I'm talking about rooted SAMSUNG phone
DaReDeViL said:
A rooted phone won't be able to connect by Bluetooth to the watch. But there's a patch to make it work.
Click to expand...
Click to collapse
Like Magisk? can u point me to the right one friend
inningsdefeat500 said:
Like Magisk? can u point me to the right one friend
Click to expand...
Click to collapse
Check this thread about bluetooth library patcher :
Error pairing Samsung wearables after rooted with Magisk
Hello, Galaxy Wearable stuck in "Finishing pairing..." status, after rooted. I tried everything's what I find in internet, but no one helping. Maybe somebody have a trick this problem? Thx!
forum.xda-developers.com
inningsdefeat500 said:
I ordered it, I have note 20 utra ( HK Version ) rooted
I had read a while back that if you setup Samsung pay directly from watch, it works?
Can I setup Spay wth a non-rooted phone, have it work on the watch then go back to the rooted phone?
Gpay works on my phone, will it work on the watch
Will any of the health apps work
Click to expand...
Click to collapse
Hi,
Try this: https://forum.xda-developers.com/t/...ch-to-rooted-s20-failed.4200677/post-84099019
DaReDeViL said:
A rooted phone won't be able to connect by Bluetooth to the watch. But there's a patch to make it work.
Click to expand...
Click to collapse
Here an user of a rooted Mi 9 and Watch 4. I didn't patch anything.
Bluetooth works a treat on my rooted OnePlus 8 Pro.
melkhior1985 said:
Here an user of a rooted Mi 9 and Watch 4. I didn't patch anything.
Click to expand...
Click to collapse
galaxys said:
Bluetooth works a treat on my rooted OnePlus 8 Pro.
Click to expand...
Click to collapse
I should have been more precise. The issue I'm talking about concerns rooted Samsung phones and @inningsdefeat500 has a Samsung Note20 which is a candidate for the connection issue if rooted ...
Ive had all model Samsung Phones, and ALL have had no issues with pairing on a rooted Samsung phone, S8+, S9+, N10, S21U.
Considering Galaxy Wear doesn't look for root, why would root be the issue?
I'm on a rooted S10 and it paired just fine. I don't use any of the pay features, but all of the health features work. Just be aware that some other people have had issues.
Srbija2012 said:
Ive had all model Samsung Phones, and ALL have had no issues with pairing on a rooted Samsung phone, S8+, S9+, N10, S21U.
Considering Galaxy Wear doesn't look for root, why would root be the issue?
Click to expand...
Click to collapse
TacoDeMuerte said:
I'm on a rooted S10 and it paired just fine. I don't use any of the pay features, but all of the health features work. Just be aware that some other people have had issues.
Click to expand...
Click to collapse
I also had all S models and faced this issue with STOCK rooted firmwares and even with only TRIPPED KNOX unrooted stock ones. Using custom roms doesn't trigger the problem as they already include the gear fix which involves patching some vendor files (manifest.xml).
If the problem doesn't exist, why would there be so many threads describing it and proposing fixes for it ?
PS : The only time I was able to directly use my GW4 and S-Health without problems on my Knox tripped S21 is with the actual A12 beta ...
there is some code pertaining to "WSM" in manifest.xml - this needs removing to get wearables connecting to galaxy wearable app properly - a few modules out there patch this
I am also on stock firmware. I'm not saying that just because I didn't have any issues, that there won't be issues for anyone else. I guess I'm one of the lucky ones.
Hello,
Yes I have the Galaxy 4 Watch, and a Rooted Note 8.
The Watch pairs without issue on Bluetooth, and works
wonderfully.
Mjamocha said:
Hello,
Yes I have the Galaxy 4 Watch, and a Rooted Note 8.
The Watch pairs without issue on Bluetooth, and works
wonderfully.
Click to expand...
Click to collapse
Hi ! I wanted ask you if your rooted note 8 use a custom rom ?
I got a Samsung S8 on custom rom based on android 12.
Thank you in advance
S21U, rooted, no issues whatsoever
fwiw, to give people the current state of affairs...
S20+ 5G rooted, stock ROM
Samsung Pay: No, just never going to work on either phone or watch after rooting - this is well known
GPay: Phone & Watch with no issues (magisk, universal safetynet module, shamiko module, deny list, hidden magisk app)
SHealth - only 6.19 works - working on a way to patch later (dont hold your breath)
DaReDeViL said:
I also had all S models and faced this issue with STOCK rooted firmwares and even with only TRIPPED KNOX unrooted stock ones. Using custom roms doesn't trigger the problem as they already include the gear fix which involves patching some vendor files (manifest.xml).
If the problem doesn't exist, why would there be so many threads describing it and proposing fixes for it ?
PS : The only time I was able to directly use my GW4 and S-Health without problems on my Knox tripped S21 is with the actual A12 beta ...
Click to expand...
Click to collapse
Hello
I am using Note 10 plus 5G variant rooted and my galaxy watch 3 stuck pairing after updating & rooting phone to android 12, it was working fine with rooted android 11.
Netflix and payment apps are working fine the only issue is with bluetooth pairing galaxy watch and samsung health app. I am using phone with changed IMEI number and not so pro at patching files, can you Guide me what can i do now to make my watch work with my phone again.