Hello everyone,
Right now I'm running the last beta of Android 10
The phone is unlocked and it is rooted
Is there a way for me to install Android 10 and not lose what I've done to the phone
Or am I better off starting from scratch
And if that is the case what are the steps I need so I don't brick my phone
I am unable to install the update......"Couldnt install try again", this is the error i am getting.............i am on latest android 10 beta
When jumping from beta to stable, or one version to another, a clean flash is always recommended.
But, if you want to update without wipe, I suggest you do the following:
- Download the full factory image of android 10
- Unzip it
- Find and edit the "flash-all" script (there are 3 of them, the .bat is for windows etc..)
- Remove the "-w" from the last line and save
- Go in fastboot mode
- Launch the modified script
It will flash the update without wiping the device. Of course since it's an update, it will remove root, custom kernel and twrp, but data will be preserved.
If you prefer to wipe, don't remove the "-w" from the script. Before launch it, remember it will wipe also the /sdcard totally, so backup to your pc what you need.
I did a clean flash and I can tell it feels more fluid and fast, also you avoid possible errors during the upgrade
If you have twrp installed, you can;
-download latest full ota zip to phone
-flash ota in twrp
-flash twrp zip after ota
-reboot recovery
-flash latest magisk zip
-reboot
This won't wipe anything, is just a dirty flash.
Cheers
Sent from my Google Pixel using XDA Labs
Sgace said:
If you have twrp installed, you can;
-download latest full ota zip to phone
-flash ota in twrp
-flash twrp zip after ota
-reboot recovery
-flash latest magisk zip
-reboot
This won't wipe anything, is just a dirty flash.
Cheers
Sent from my Google Pixel using XDA Labs
Click to expand...
Click to collapse
Thanks working on it now
Onknight said:
Thanks working on it now
Click to expand...
Click to collapse
Good luck and do let us know if it worked out for you.
Cheers
Sent from my Google Pixel using XDA Labs
end up doing a factory Reset and will install 10 threw the phone
Onknight said:
end up doing a factory Reset and will install 10 threw the phone
Click to expand...
Click to collapse
Did'nt work or you just want to do a factory reset to be sure?
Cheers
Sent from my Google Pixel using XDA Labs
Sgace said:
Did'nt work or you just want to do a factory reset to be sure?
Cheers
Sent from my Google Pixel using XDA Labs
Click to expand...
Click to collapse
it deleted Twrp so I had just do the reset and Install 10 From The phone
Sgace said:
If you have twrp installed, you can;
-download latest full ota zip to phone
-flash ota in twrp
-flash twrp zip after ota
-reboot recovery
-flash latest magisk zip
-reboot
This won't wipe anything, is just a dirty flash.
Cheers
Sent from my Google Pixel using XDA Labs
Click to expand...
Click to collapse
I want to flash the full image, without wiping so ill remove the -w. But I see there are two packages for Android 10 on googles page. Do you know which version to download if im in the USA with Tmobile? Thanks.
Mine automatically did the second one when I accepted the OTA from the carrier. The "20" one.
kazemitsui said:
I want to flash the full image, without wiping so ill remove the -w. But I see there are two packages for Android 10 on googles page. Do you know which version to download if im in the USA with Tmobile? Thanks.
Click to expand...
Click to collapse
I flashed the .20. No one knows what the difference is.
Cheers
Sent from my Google Pixel using XDA Labs
jackdubl said:
Mine automatically did the second one when I accepted the OTA from the carrier. The "20" one.
Click to expand...
Click to collapse
Sgace said:
I flashed the .20. No one knows what the difference is.
Cheers
Sent from my Google Pixel using XDA Labs
Click to expand...
Click to collapse
Which version of Magisk did you guys install 19.4 Canary or the 19.3 Stable?
Also did you just boot into TWRP or did you flash TWRP?
kazemitsui said:
Which version of Magisk did you guys install 19.4 Canary or the 19.3 Stable?
Also did you just boot into TWRP or did you flash TWRP?
Click to expand...
Click to collapse
Used the 19.3 stable.
Flashed twrp after flashing full ota image in booted/installed twrp.
Cheers
Sent from my Google Pixel using XDA Labs
Sgace said:
Used the 19.3 stable.
Flashed twrp after flashing full ota image in booted/installed twrp.
Sent from my Google Pixel using XDA Labs
Click to expand...
Click to collapse
Thanks. I tried to flash Magisk 19.3 Stable and ElementalX Kernal 5.05 but I got the error at the end that system and something else were not mounted. Do you know how I get around this? THANKS for all your input!
kazemitsui said:
Thanks. I tried to flash Magisk 19.3 Stable and ElementalX Kernal 5.05 but I got the error at the end that system and something else were not mounted. Do you know how I get around this? THANKS for all your input!
Click to expand...
Click to collapse
Sorry, can't help you with that as I'm not familiar with custom kernels and flash orders.
Maybe ask in that specific thread?
Cheers
Sent from my Google Pixel using XDA Labs
Related
Hello,
Here is I want to share my work of latest AOSP Jelly Bean 4.3 with build number JSS15J for Nexus 7 (WIFI).
I have do this from the source on google.
This ROM can be flash via CWM (TWRP not tested). Make sure you have installing CWM first (I have 6.0.3.3 on my tablet).
Let's to the point .
Download Link : https://www.dropbox.com/sh/x2wov7n2f8m7eze/5rzHYlV4tq/grouper43-gapps.zip
Instruction :
Please backup your current ROM first before execute this.
Make sure you have upgrade Bootloader v4.23 and Radio 1231_0.18.0_0409
1. Download and put them in your internal SDCard.
2. Reboot into your recovery mode.
3. Wipe Data/Factory.
4. Wipe Cache Partition.
5. Wipe Dalvik Cache.
6. Installing from ZIP
7. Reboot and enjoy.
Features :
1. ROM already Deodexed.
2. Dual Panel Settings.
3. Combined with Latest Gapps.
4. Latest Kernel 4.3 (MR2)
5. Advanced Power Menu
Android 4.3 Version :
JWR66V is 4.3_r1
JSR78D is 4.3_r2
JSS15J is 4.3_r2.1
DO WITH YOU OWN RISK
Credits :
Google
Thank you .
Reserved .
First...downloading now.......
No root?
Sent from my Nexus 7 using xda app-developers app
_-..zKiLLA..-_ said:
No root?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Yes, You must installing latest Superuser/SuperSU after that if you want to root them .
This is pure stock with zero customization and tweak am I right?
Sent from my GT-I9100 using Tapatalk 4
infatality said:
This is pure stock with zero customization and tweak am I right?
Sent from my GT-I9100 using Tapatalk 4
Click to expand...
Click to collapse
It's pure stock who have compile from the source on Google. But, I have add power menu and combining with latest Gapps.
why there is a bootloader requirement?
Sent from my Nexus 7
1Q84 said:
why there is a bootloader requirement?
Sent from my Nexus 7
Click to expand...
Click to collapse
Actually, that was optional. I said in that above because their stock ROM include with new Radio and Bootloader. Only keep they can working properly .
failed to install?
podagee said:
failed to install?
Click to expand...
Click to collapse
Can you specific about the error message ?
tried installing it through twrp and it says failed right at the end.is this for grouper?
TWRP says:
extracting system...
set_perm: some changes failed
E:Errror executing updater binary in zip '/sdcard/download/aosp43-grouper-gapps.zip
Error flashing zip '/sdcard/download/aosp4-grouper-gapps.zip
I think your source is for tilapia no radio in grouper I tried install same errors
Sent from my Nexus 7 using Tapatalk 4
_-..zKiLLA..-_ said:
TWRP says:
extracting system...
set_perm: some changes failed
E:Errror executing updater binary in zip '/sdcard/download/aosp43-grouper-gapps.zip
Error flashing zip '/sdcard/download/aosp4-grouper-gapps.zip
Click to expand...
Click to collapse
jimchee said:
I think your source is for tilapia no radio in grouper I tried install same errors
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
podagee said:
tried installing it through twrp and it says failed right at the end.is this for grouper?
Click to expand...
Click to collapse
I am sorry, Please hold on while I checking to fix and reupload them.
The file has been examining and corrected. You can download them now.
Any chance for an Odexed base?
I tried again to install and just sat on the boot screen and tried again after booting back into recovery and clearing dalvik cache same result, has anyone else successfully booted? If so tell me how you proceeded on install, I formatted data and cache then wiped boot and did clean install, it did install but just stayed on boot animation, let it run for at least 10 minutes but never booted into Rom,
Sent from my Nexus 7 using Tapatalk 4
jimchee said:
I tried again to install and just sat on the boot screen and tried again after booting back into recovery and clearing dalvik cache same result, has anyone else successfully booted? If so tell me how you proceeded on install, I formatted data and cache then wiped boot and did clean install, it did install but just stayed on boot animation, let it run for at least 10 minutes but never booted into Rom,
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
same here no success with boot, it just hangs. ill just stick to cm10.2
I'm on stock rooted 4.4.2 running Franco kernel. Question is how do I update with out bringing phone to factory settings
SENT FROM MY SM-N900T/NEXUS 5 USING TAPATALK
you make a backup in recovery, then dirty flash, dont wipe a single thing, 444 over it. if alls well after, then perfect. if you have issues, you have that backup in recovery to restore
simms22 said:
you make a backup in recovery, then dirty flash, dont wipe a single thing, 444 over it. if alls well after, then perfect. if you have issues, you have that backup in recovery to restore
Click to expand...
Click to collapse
I downloaded then tried to flash the zip file in twrp .. It says it failed not sure what to do next and is 4.4.4 the latest firmware?
SENT FROM MY SM-N900T/NEXUS 5 USING TAPATALK
ROADKING17 said:
I downloaded then tried to flash the zip file in twrp .. It says it failed not sure what to do next and is 4.4.4 the latest firmware?
SENT FROM MY SM-N900T/NEXUS 5 USING TAPATALK
Click to expand...
Click to collapse
Unfortunately my clairvoyant skills aren't working today
perhaps you could elaborate on the following 2 things
1) what zip are you flashing?
2) what error are you getting?
Sent from my Nexus 5 using Tapatalk
The pop up I get every 3 days for me to update my device to 4.4.3 I believe.. It's located in twrp under cache... When I try flashing it says error in red lettering ... Also I tried Uninstalling Xposed but seems not to change anything
SENT FROM MY SM-N900T/NEXUS 5 USING TAPATALK
ROADKING17 said:
The pop up I get every 3 days for me to update my device to 4.4.3 I believe.. It's located in twrp under cache... When I try flashing it says error in red lettering ... Also I tried Uninstalling Xposed but seems not to change anything
SENT FROM MY SM-N900T/NEXUS 5 USING TAPATALK
Click to expand...
Click to collapse
Don't use OTA updates. Just manually flash a rooted stock ROM via TWRP.
Click the link in my signature and go to the "resources" section. You'll find a full rooted, PURE STOCK 4.4.4 rom there.
Copy it to your /sdcard, take a FULL nandroid backup then flash the ROM.
rootSU said:
Don't use OTA updates. Just manually flash a rooted stock ROM via TWRP.
Click the link in my signature and go to the "resources" section. You'll find a full rooted, PURE STOCK 4.4.4 rom there.
Copy it to your /sdcard, take a FULL nandroid backup then flash the ROM.
Click to expand...
Click to collapse
Will I lose anything on my device and will I be able to dirty flash
SENT FROM MY SM-N900T/NEXUS 5 USING TAPATALK
ROADKING17 said:
Will I lose anything on my device and will I be able to dirty flash
SENT FROM MY SM-N900T/NEXUS 5 USING TAPATALK
Click to expand...
Click to collapse
did you read any of the threads? the answer is in there.
ROADKING17 said:
Will I lose anything on my device and will I be able to dirty flash
SENT FROM MY SM-N900T/NEXUS 5 USING TAPATALK
Click to expand...
Click to collapse
if the dirty flash is successful, you wont lose a thing, except time. if you have to go back and wipe, you will lose your data. so, make a backup in recovery first, before the dirty flash.
Hello,
I just make a full wipe and see that Supersu is installed by default after boot. Is this normal?
Thanks,
Vandur
No unless you're flashing a custom rom. Some custom roms will include supersu.
Sent from my Nexus 5 using XDA Free mobile app
vandur said:
Hello,
I just make a full wipe and see that Supersu is installed by default after boot. Is this normal?
Thanks,
Vandur
Click to expand...
Click to collapse
If you did a full wipe using twrp, it roots the phone automatically unless you decline the option.
Sent from my 1+1
Mojar7070 said:
If you did a full wipe using twrp, it roots the phone automatically unless you decline the option.
Sent from my 1+1
Click to expand...
Click to collapse
No i didnt flash TWRP, basicly i done two wipe one from stock recovery other from settings -> backup & reset. And Supersu still there?!
I bought this devices secondhand and im curious if it could be a security problem...
Thanks for replays.
Vandur
vandur said:
No i didnt flash TWRP, basicly i done two wipe one from stock recovery other from settings -> backup & reset. And Supersu still there?!
I bought this devices secondhand and im curious if it could be a security problem...
Thanks for replays.
Vandur
Click to expand...
Click to collapse
If you bought it second hand the first thing I'd do is flash the factory image so it's like brand new.
Sent from my Nexus 5 using XDA Free mobile app
No, you have to flash it!!
vandur said:
No i didnt flash TWRP, basicly i done two wipe one from stock recovery other from settings -> backup & reset. And Supersu still there?!
I bought this devices secondhand and im curious if it could be a security problem...
Thanks for replays.
Vandur
Click to expand...
Click to collapse
Download the factory images and flash according to googles instructions.
Currently on TekHd. I want to order update TWRP. What would be the process to do this without resetting everything?
re: twrp
jkeith1 said:
Currently on TekHd. I want to order update TWRP. What would be the process to do this without resetting everything?
Click to expand...
Click to collapse
Why do you want to update twrp when there is nothing wrong with it?
If you do update twrp to a newer version it would not reset anything.
Good luck,
Have a great day!
I'd also like to move onto 3.0.0.0 because MTP does not work on 2.8.7.1. I have tried everything and am unable to move anything off the phone in TWRP.
jkeith1 said:
Currently on TekHd. I want to order update TWRP. What would be the process to do this without resetting everything?
Click to expand...
Click to collapse
Nothing will be reset. Just download the version for your device in .IMG format and flash it in TWRP or via Odin. I have no issues with 3.0 and have been using it since it became available.
Sent from my SM-N920T using Tapatalk
Download Flashify via play store, download TWRP IMG and flash via Flashify. Note be sure to select recovery IMG not boot IMG. Done!
Sent from my phone...
Here you go:
https://dl.twrp.me/noblelte/
Sent from my SM-N920T using XDA-Developers mobile app
I've been sitting on 5.1.7 rooted with TWRP for awhile. Got the OTA to 5.1.8 and accidentally clicked install. Will I just have to reinstall magisk when it's done?
czonin said:
I've been sitting on 5.1.7 rooted with TWRP for awhile. Got the OTA to 5.1.8 and accidentally clicked install. Will I just have to reinstall magisk when it's done?
Click to expand...
Click to collapse
U HAVE TO FLASH TWRP.img again via adb AND THEN flash magisk again if u have installed OTA package.
And dont sit on oxygen os again it will break down ?
pankspoo said:
U HAVE TO FLASH TWRP.img again via adb AND THEN flash magisk again if u have installed OTA package.
And dont sit on oxygen os again it will break down
Click to expand...
Click to collapse
That worked, thanks!
Is it also possible to flash the rom.
After that magisk and then twrp.zip?
Ghost123NL said:
Is it also possible to flash the rom.
After that magisk and then twrp.zip?
Click to expand...
Click to collapse
You can download the full ROM, flash it in TWRP, flash TWRP.zip, reboot recovery, flash magisk, reboot and done.
Last week I flashed the ota as full rom image via fastboot. Then booted and everyting was ok. But then, rebooted into recovery and it just wiped everything without any option. So, my guess is to flash ota via fastboot, fladh twrp via fastboot, reboot to twrp and then install magisk ?
P.s. after update to 5.1.8, does your rear camera portrait mode is working ? My not.
Sent from my Nexus 6P using xda premium
Lior84 said:
Last week I flashed the ota as full rom image via fastboot. Then booted and everyting was ok. But then, rebooted into recovery and it just wiped everything without any option. So, my guess is to flash ota via fastboot, fladh twrp via fastboot, reboot to twrp and then install magisk ?
P.s. after update to 5.1.8, does your rear camera portrait mode is working ? My not.
Sent from my Nexus 6P using xda premium
Click to expand...
Click to collapse
Just install like I mentioned above...
Lior84 said:
Last week I flashed the ota as full rom image via fastboot. Then booted and everyting was ok. But then, rebooted into recovery and it just wiped everything without any option. So, my guess is to flash ota via fastboot, fladh twrp via fastboot, reboot to twrp and then install magisk ?
P.s. after update to 5.1.8, does your rear camera portrait mode is working ? My not.
Sent from my Nexus 6P using xda premium
Click to expand...
Click to collapse
You probably ran the fasboot command with wipe option included.
Ok, what is the correct command to run via fastboot ?
Sent from my Nexus 6P using xda premium