Related
Figures they'd come out with it a week before I'm thinking of picking up an Imate Ultimate 8150. But it's out for those of you interested link below.
P3600 Full Body Invisible Shield
http://www.shieldzone.com/item_description/HTCP3600I.html
Nice!! It's listed for the P3600i, but I guess it's exactly the same as the P3600.
Anybody tried it already?? Better than a regular silicon cover?
How does this work?
If it is stretched all over the PDA, how is it joined/sealed? What about removing the batter cover or using the thumb wheel? Is it fixed like cling-film?
Also, the screen is recessed from the surround so if it is stretched around the housing and screen, then there would seem to be a gap between the screen and this cover, so what will the sensitivity of the screen be like?
PaulusUK said:
How does this work?
If it is stretched all over the PDA, how is it joined/sealed? What about removing the batter cover or using the thumb wheel? Is it fixed like cling-film?
Also, the screen is recessed from the surround so if it is stretched around the housing and screen, then there would seem to be a gap between the screen and this cover, so what will the sensitivity of the screen be like?
Click to expand...
Click to collapse
If you followed the link and watched the installation video showing it being applied to an ipod you wouldn't have asked.........suggest you try that first.
Andych said:
If you followed the link and watched the installation video showing it being applied to an ipod you wouldn't have asked.........suggest you try that first.
Click to expand...
Click to collapse
looks like it would be a least 3 pieces - one for the screen, then one for the keys, and one for the back - which does not protect the sides. And the video doesn't show how it fits on the phone, it shows how it fits on the front of a ipod - so don't be a smart a*s. He was asking how it fits on this phone not an ipod dumb a*s.
earl00 said:
looks like it would be a least 3 pieces - one for the screen, then one for the keys, and one for the back - which does not protect the sides. And the video doesn't show how it fits on the phone, it shows how it fits on the front of a ipod - so don't be a smart a*s. He was asking how it fits on this phone not an ipod dumb a*s.
Click to expand...
Click to collapse
Get life....yes the clip shows it being fitted to an ipod......if you gothered to watch the clip you would have seen that the piece for the back also does the sides as they wrap around.....apart from the size etc the actual method of applying this will be the same.
Next time smart a*s do your homework rather than mouthing off.
Oh yes all my questions answered if only I had watched the ipod video.
Now All I need is an m700 that is exactly the same shape as an ipod, with all the buttons in the same place, with a flush screen, and well, all very ipodish, and then it will all be clear.
So this will be no more than a screen protector on the PDA. It will not protect the buttons or lower raised section of the housing. Also won't protect the sides (too many buttons), and it seems that the tight curves will be a problem for this cover. I can see this peeling off the m700 in a very short time
If you know so much about it, then can you explain how it will work with a recessed screen? Will I be able to tap it all over with a key and not damage the phone, and if I throw it in a box of coins, will all the phone be safe from scratches and chips - just like the ipod?
PaulusUK said:
Oh yes all my questions answered if only I had watched the ipod video.
Now All I need is an m700 that is exactly the same shape as an ipod, with all the buttons in the same place, with a flush screen, and well, all very ipodish, and then it will all be clear.
So this will be no more than a screen protector on the PDA. It will not protect the buttons or lower raised section of the housing. Also won't protect the sides (too many buttons), and it seems that the tight curves will be a problem for this cover. I can see this peeling off the m700 in a very short time
If you know so much about it, then can you explain how it will work with a recessed screen? Will I be able to tap it all over with a key and not damage the phone, and if I throw it in a box of coins, will all the phone be safe from scratches and chips - just like the ipod?
Click to expand...
Click to collapse
Lets get this straight....I haven't used this product...however when I saw the "link" I went to the manufacturers site to get a better understanding of it....
I watched the video and while it was of it being fitted to an ipod I got a basic understanding of how it could be fitted to a P3600i.
I didn't think it was "cling wrap", I understood that there would be several sections involved....including one for the recessed screen (yes, just like a normal screen protector) and I too would be skeptical of it protecting all parts of the phone.
There is a tendency in these forums for people to not search out information but to ask seemingly dumb questions.....
As this product is new for this model....why not just ask if anyone has tried it or ask the manufacturer for more information.....or is that too hard to do????
NOT FULL BODY...JUST SCREEN ONLY
The site says full body not Screen only, that's a separate option...
I would really like to know if and how exactly this works on 3600.
I actually have silicon case and screen protector for mine, but this would make it considerably smaller...
Bought and use the InvisibleShield
Folks,
I bought it and had it send to Holland. Took about 1 to 2 weeks but ok I am not in a hurry.
The full body covers basically all the shiny black plastic plus the screen. The rest (middles of the sides and the front keys) are not covered. Also offcourse the camera, speakers etc are not covered. However, and this is probably the difference between P3600 and P3600i the front camara is covered by the shield blurring the image. Now I have already put it on the camera but the next time I would use a hole puncher to add the extra hole. I probably will use a sharp hobby knife to cut an extra hole (on the other hand I never use video conferencing).
The plastic is more stronger and thicker then normal screen protectors. Haven't tried to scratch it on pupose and guess what I am not going to do it. If a scratch forms by accident I will mention it here.
The screen takes some getting used to with the new cover. The plastic does not "slide" as easy as the original screen protector or the screen itself. Maybe this is just in the first period.
The application process it pretty easy if you just take the time. Takes about 30 minutes if you do it slowly. Only 2 minor bubbles on the back but those are not really an issue, the rest is perfect.
Hey for 20 euro's I think it is a good deal. No horrible rubber case or GPS blocking metal case for me anymore. Only downside is that if the phone is dropped now there is no protection. This is only against scratches.
Lifetime guarantee so lets see how often I have to send it back.
All in all recommended so far (but that is just after 1 day of use)
I want to see it
Post a picture please
Isn't it invisible?..
See the invisible sheet
Well actually it is quit difficult to see but here are some picures. The picture from the side shows you some edges.
Edges
The edges that you can see in the pic don't seem to line up perfectly, how were the dimensions on the rest of the edges?
i've been thinkin of getting one of these since i saw them for ipods but that messy edge is scaring me away a little, also how are you finding the screen protector after a little more use?
Edges reply
Well the edges are more because of my talent I think. The reason why I showed you this is because at least you can see something. For the rest it alligns perfectly.
After using it for a while it still seems a great product. I accidentaly dropped the thing but no scratch at all. What you do notice is the slightly more pressure you need when using the stylo. Also the screen protector is not as smooth as the original screen making the sliding a little more difficult. Also the plastic sticks to your ear while calling. But all in all still recommended.
I just put it onto the white one...
...and it is invisible. You can see it only on buttons' silver surrounding, on white parts only the edges are visible if you try really hard. I haven't got a good enough camera to show it, sorry.
It has a sticky feeling about it (maybe needs to dry more?). I don't like it on the screen - feels sticky and thick. I'd say use a decent screen protector instead.
It came WITH the cut-out for a camera (it's 3600i shield, I've got 3600), so it fits like a glove.
Oh, it's not a stress-free, low pressure 15 minutes application like they advertise it. It's fekkin pain in the ar$e one hour job, you're swetting your ar$e off. And - I guess - you can never get it perfect at the end. There will always be a bubble or misaligned edge somewhere (or is it me?).
Long term use review to follow.
sabestian said:
...and it is invisible. You can see it only on buttons' silver surrounding, on white parts only the edges are visible if you try really hard. I haven't got a good enough camera to show it, sorry.
It has a sticky feeling about it (maybe needs to dry more?). I don't like it on the screen - feels sticky and thick. I'd say use a decent screen protector instead.
It came WITH the cut-out for a camera (it's 3600i shield, I've got 3600), so it fits like a glove.
Oh, it's not a stress-free, low pressure 15 minutes application like they advertise it. It's fekkin pain in the ar$e one hour job, you're swetting your ar$e off. And - I guess - you can never get it perfect at the end. There will always be a bubble or misaligned edge somewhere (or is it me?).
Long term use review to follow.
Click to expand...
Click to collapse
Any update to report? I'm thinking about buying one and would like your oppinion since you've now had it for a while.
Dimitri- said:
Folks,
I bought it and had it send to Holland. Took about 1 to 2 weeks but ok I am not in a hurry.
The full body covers basically all the shiny black plastic plus the screen. The rest (middles of the sides and the front keys) are not covered. Also offcourse the camera, speakers etc are not covered. However, and this is probably the difference between P3600 and P3600i the front camara is covered by the shield blurring the image. Now I have already put it on the camera but the next time I would use a hole puncher to add the extra hole. I probably will use a sharp hobby knife to cut an extra hole (on the other hand I never use video conferencing).
The plastic is more stronger and thicker then normal screen protectors. Haven't tried to scratch it on pupose and guess what I am not going to do it. If a scratch forms by accident I will mention it here.
The screen takes some getting used to with the new cover. The plastic does not "slide" as easy as the original screen protector or the screen itself. Maybe this is just in the first period.
The application process it pretty easy if you just take the time. Takes about 30 minutes if you do it slowly. Only 2 minor bubbles on the back but those are not really an issue, the rest is perfect.
Hey for 20 euro's I think it is a good deal. No horrible rubber case or GPS blocking metal case for me anymore. Only downside is that if the phone is dropped now there is no protection. This is only against scratches.
Lifetime guarantee so lets see how often I have to send it back.
All in all recommended so far (but that is just after 1 day of use)
Click to expand...
Click to collapse
Same question for you... Any updates? Thank you...
Definately recommended
After using it a few months I still think it is definately worth the few euro's. Ok it sticks a bit when calling for a long time and I think I even managed to get a small scratch on it but I sort of abuse the fact that I have the shield. Store it with keys, never use a case etc.
No I have bought some useless accessoires such as aluminium case (blocks GPS) and the remote for mediaplayer but the shield I would really recommend.
Cheers,
Dimitri.
Every gadget owner loves their devices be it Cell Phones, Laptops, GPS, Gaming Consoles, etc. and would never want our devices to get scratchy, dirtily, peel off or loose their color and shine. For this some of us freaks keep cleaning out devices or cover them with cheap looking low quality plastic guard just to see it getting peeled off soon and getting all scratches just to buy another one in few weeks. This is because many of us are unaware of some of the finest Body Scratch Guards which themselves can never attain a scratch.
Yes, that’s true and this article is about Top 4 Body Guards covering not just the screen but the complete body of your device, that I came across. I’ll just be giving my honest reviews about all four of them and leave the rest on you to decide which you prefer.
you can find the comparison here:
http://winmo.techparaiso.com/best-s...isible-shields-vs-ghost-armor-vs-body-guardz/
Well based on peoples experience here....http://forum.xda-developers.com/showthread.php?t=398021
I can safely say Invisible shield is not a good solution. Generally anything that adheres to your device runs the risk that your finish will lift off if you ever decide to remove the shield.
band27 said:
Well based on peoples experience here....http://forum.xda-developers.com/showthread.php?t=398021
I can safely say Invisible shield is not a good solution. Generally anything that adheres to your device runs the risk that your finish will lift off if you ever decide to remove the shield.
Click to expand...
Click to collapse
i would still like to see some screenshots of bestskinsever for diamond as nothing is available anywhere.
want the best protector? Buy a psp HORI Protector, cut to size. 100% invisible and only a knife will scratch it. 2 for .99 on ebay
I'd also love to hear people experience with Best Skins Ever. I'm a sucker and always buy the zagg.com stuff, price = quality after all... but would be willing to grab a BSE skin based on peoples reviews, as the markup on zagg.com is ridiculous.
One thing, I dislike with the zagg.com skins is, after a while the protector appears as if it has a gasoline like stain in the middle of it, symmetrical to about half an inch away from the edge of the screen on all sides. So basically a mini rectangle on the inner portion of the display. Any else experience this? and does the BSE have this tendency?
P.S. Don't forget BodyGuardz
I've been using Invisible shield by Zagg since I bought my Diamond and I completly agree with Lokosis. I also feel the corners are becoming a bit rough, it looks like someone can just pull it off.
* Doesn't fit into my HTC pouch anymore (see picture attached).
* Attracts a lot of dust.
* Don't need a bulky case anymore.
* Gives the back cover a shiny effect.
well yesterday i received my best skins for diamond. i must say delivery was really fast but a little disappointed. i'll tell you why later.
also i'll be posting the pics of my diamond soon.
I bought a full cover from invisible shield about a week and a half ago but am still waiting for it to be shipped to me since I live in Australia and there is not stock here.
Didn't realize there was a cheaper alternate to it. I've got to say I'm a bit worried after just reading that post that says it can damage the screen when you remove it after a while...but hopefully I will never have to remove it
AdamHC said:
I bought a full cover from invisible shield about a week and a half ago but am still waiting for it to be shipped to me since I live in Australia and there is not stock here.
Didn't realize there was a cheaper alternate to it. I've got to say I'm a bit worried after just reading that post that says it can damage the screen when you remove it after a while...but hopefully I will never have to remove it
Click to expand...
Click to collapse
nothing to wory dude. even i first bought IS and den after an hour got to know about BSE so i ordered that too. i'd a talk with IS ppl and they say that when i receive the item, then i should take out the screen guard, put it in envelope and send it back to there address. thats it. they said they dont need the box of spray or anything. just the invisible shield in an envelope. and as soon as they receive it, they'll refund you the money. sending it back in envelope is much cheeper and you save alot. so order BSE now and wait for IS to arrive and send it back
invisible? are you blind?
Well, it's a good screen protector, but it's definitely not invisible...
Are you blind guys?
I just got the screen one and not the whole case skin because I own an o2 Ignito which has a lovely-grippy-rubber-feeling-matt-black back cover, although it is not as sexy as the standard Diamond my wife has.
I was honestly quite disappointed because it is expensive and honestly looks crap compared to cheaper alternatives.
Have you ever tried Vikuiti by 3M guys?
I have it on my Orbit (it's a PSP screen protector, I opened the Orbit and cut the film on the proper size of the display, once re-assembled you can't see any edge at all) it's impossible to leave fingerprints and it is anti-reflection.
The Diamond one is gloss finishing instead, it costs € 8 on eBay (german seller but ships worldwide)
The invisible shield finally arrived. It wouldn't stick to my screen...lol
Well it stuck to the screen, just that the edges are supposed to bend and protect the sides too and no matter how long i held the edges in their positions for they would just unpeel themselves after a couple of minutes. Gave up on the screen, the rest all went on easily and without any visible bubble thingies. I'm not sure if I really care enough to get a new screen protector for the screen, I was more worried about the back of the phone to be honest
Still kinda dissapointed that the screen protector ended up failing for me
AdamHC said:
The invisible shield finally arrived. It wouldn't stick to my screen...lol
Well it stuck to the screen, just that the edges are supposed to bend and protect the sides too and no matter how long i held the edges in their positions for they would just unpeel themselves after a couple of minutes. Gave up on the screen, the rest all went on easily and without any visible bubble thingies. I'm not sure if I really care enough to get a new screen protector for the screen, I was more worried about the back of the phone to be honest
Still kinda dissapointed that the screen protector ended up failing for me
Click to expand...
Click to collapse
i really don understand where u guys fail. i understand that d edges don stick up but it takes half an hour effort to do it. its easy but takes times and u constantly hav to make it stick.
rest both BSE and IS are great. the point is to make it wet properly and den apply.
the only issue i had is that the IS solution went in my front camera screen and has made it blurred.
rest both are the same according to me.
also to be noted that you do not need to use IS spray. instead you can even put your IS in soapy solutions and apply it like BSE.
the aim is to 1st attch is properly on front screen. let it dry and then bend the edges.
sunnyin86 said:
i really don understand where u guys fail. i understand that d edges don stick up but it takes half an hour effort to do it. its easy but takes times and u constantly hav to make it stick.
rest both BSE and IS are great. the point is to make it wet properly and den apply.
the only issue i had is that the IS solution went in my front camera screen and has made it blurred.
rest both are the same according to me.
also to be noted that you do not need to use IS spray. instead you can even put your IS in soapy solutions and apply it like BSE.
the aim is to 1st attch is properly on front screen. let it dry and then bend the edges.
Click to expand...
Click to collapse
I used enough of the solution, got it lined up perfectly with the phone. It was the edge bits that have to be bent to protect the sides where I went wrong. Just couldn't get them to stick and stay stuck properly for some reason
AdamHC said:
I used enough of the solution, got it lined up perfectly with the phone. It was the edge bits that have to be bent to protect the sides where I went wrong. Just couldn't get them to stick and stay stuck properly for some reason
Click to expand...
Click to collapse
it takes alot of time for sure. for half an hour i kept trying and thought maybe the adhesive wasnt strong enough. but there are two things, 1st you have to use alot of spray to smoothly allign it on screen and then this excess spray avoids the sides to stick onn. so patience, repeated efforts and only when the solution dries up, that is when it starts to stick onn. very tough for sure but in the end it pays off.
BUT the diff bet IS and BSE is that BSE only covers the screen and does not cover the sides so there is no bending problem like IS.
sunnyin86 said:
it takes alot of time for sure. for half an hour i kept trying and thought maybe the adhesive wasnt strong enough. but there are two things, 1st you have to use alot of spray to smoothly allign it on screen and then this excess spray avoids the sides to stick onn. so patience, repeated efforts and only when the solution dries up, that is when it starts to stick onn. very tough for sure but in the end it pays off.
BUT the diff bet IS and BSE is that BSE only covers the screen and does not cover the sides so there is no bending problem like IS.
Click to expand...
Click to collapse
In that case I think I might buy one of the BSE. I think that trying to protect the sides is simply too much effort and is tedious. Besides that, the sides are fairly scratch resistant and you can't even see those scratches if them do occur without having to look for them anyway. I really think IS should have skipped trying to protect them or made a second piece to go around the outside.
both are sam so betteer to opt for bse. am loving it.
more pros n cons on bse please......
i found that they didn't provide spray bottle....
mygreatdiamond said:
more pros n cons on bse please......
i found that they didn't provide spray bottle....
Click to expand...
Click to collapse
its best not to have spray. as spray gets into front camera and spoils it. best to use simple soap water.
BodyGuardz vs BestSkinsEver
Hello,
Here is my experience. I had a InvisibleSHIELD on my iPod Classic and it was great so I was considering buying one but after reading some of the the feed back it seemed that the product was good but the fit for our diamonds and even the iPhone (which i am now looking for) was not great.
I then heard about BestSkinsEver and because it was so cheap decided to go ahead and try it. I got it over 2 months ago and when I received it I applied it immediately. I have done a few of these so and since I am some what of a perfectionist I applied it to the best I could. It looked OK but after a few weeks the corners started peeling. Also due to the way the backing is placed it puts stress in areas which causes other areas to lift off (this is mostly on the corners). I ended up using a nail clipper to start clipping areas that were peeling off. After about 2 months it started to peal even more so I decided to go back to the reviews and see what was available. After doing some research I decided to go with the 12 piece BodyGuardz. It came in a set of 2 which is nice when i transfer the phone to my wife.
So all of this is to tell you that my first impressions of the BodyGuardz is well as good as I felt when I put the InvisibleSHIELD on my first iPod Classic. For me it did take a while (about 2-3 hours) to apply. This was not done in one sitting but instead because it was a 12 piece I applied each piece with 10 minute intervals allowing for tackiness to set in and so it would be easier to handle as I continued with the many pieces. First major thing I noticed and was really happy about was the BodyGuardz stickiness was considerably more than the BestSkinsEver. It stuck to the corners almost right away. Although throughout the process I did press down on the corners it was quite a bit easier as the BestSkinsEver did not have good stickiness. Also on a side note when i removed the BestSkinsEver it came of like a sticker which i know from my previous iPod is not normal and it usually takes a lot more effort to get it off carefully. Overall I am very happy at my first impressions of the BodyGuardz and the quality of the material seems to be better than the BestSkinsEver. Not to mention the 12 piece may seem like a lot of work but having individual pieces allows for no stress on the film in weird areas allowing it to sit flat with no parts lifting off (so far, i'll update in a month or two). Which is not the same case for the BestSkinsEver and from what I hear the InvisibleSHIELD. Newayz I hope this review helps someone.
Justin
Mr. Makk said:
its best not to have spray. as spray gets into front camera and spoils it. best to use simple soap water.
Click to expand...
Click to collapse
I never sprayed the device only the shield itself. I would not recommend spraying the device. That said I do like the spray on the shield as it is a bit more even but you can use any spray bottle. I got one with Bodyguardz but there was not enough fluid in it so i had to fill it up with my own solution newayz.
Hi all,
I got my Nexus one and ever since I am bugged with this "defect"?. I checked with one of my friends and his N1 got this defect too. Do you all have it?
The defect is that; Right above the volume control buttons, the back cover doesn't fit. Part of the front casing (being hard and all) cuts my fingers when i try to hold this thing in my right hand. And that's my hand I use for reading stuff..
My questions are:
- do you have the same problem?
- if not, how can I order a back cover that fits perfectly? since I am really really annoyed with this?
- if there's another way of fixing this issue, what would that be?
best,
kirpi
I am from Turkey and one of my friends brought this n1 to me by the way, so rma is not an option [and I actually unlocked the bootloader already anyways]
mine does not have this defect
http://www.htc.com/www/support/nexusone/
they might still get you a replacement part for a hardware defect that cut you.. id call or email them and ask
Mine is fine.
My first Nexus One did not have this defect. My replacement does.
Call HTC and have them send you a replacement battery cover. If the replacement doesn't fit, have them send you a new phone.
Yes, I noticed it too and looked all over the web to see if it was normal. Seeing as others have noticed it to and some have even had one that fits properly and one that doesn't I think I'll try to call HTC and have them send a free cover. Has anyone tried this and been successful?
well, apparently it is not normal. so I asked htc how can i replace the cover.
i actually wait for any vendor /chinese etc/ to produce spare parts so that i can buy one in case htc cannot provide the cover to turkey
The back cover is off for me as well, however, I would suggest manual labor to toughen up your hands.
kirpi said:
well, apparently it is not normal. so I asked htc how can i replace the cover.
i actually wait for any vendor /chinese etc/ to produce spare parts so that i can buy one in case htc cannot provide the cover to turkey
Click to expand...
Click to collapse
Did you speak to someone at HTC? Did they offer to send a replacement cover? The thing is I can't tell if it's the cover that is off or if the phone part is off.
The back case is a little off. And from all the pictures of nexus one... it seems to be the case for everyone. However, nothing that will cut finger. I rubbed my finger on it for 2-3 minutes..nothing.
Everyone else.. look closely.. the metal part between volume and power is slightly visible as compared to smooth side of left. It is very slight and looks like a design change HTC made for placing volume and power key.
Called HTC and they agreed to send out a replacement battery cover so we'll see if that changes anything.
My first phone did not have this. My second did. I am now on my third and it has the slightest of a lip. You couldn't even notice it unless it was up to your eye. However my issue is with the screen. The right side of the screen is not flush with the phone, and there is a jagged lip that is horrid. I've been waiting for them to close my current ticket ( It's been 2 weeks, and have my money back in my back, but it still says testing phone ( yes , it was unlocked =) )). My old phone had massive dust under the screen.
Anyone else have this screen to phone edge problem? I almost regret selling my iPhone as the quality control seemed better. But I love my openess
I have no edge issues on the back cover...
muncheese said:
The back cover is off for me as well, however, I would suggest manual labor to toughen up your hands.
Click to expand...
Click to collapse
yeah if that cut him WOW!!! hahahaha
What kind of moisturizer do you use? Your hands must be silky smooth! Like buttah!
I just noticed this defect today! I only noticed it after dropping it though (while sitting on the toilet it fell out of my pocket) so no damage of course but didn't notice before hand
well i am not that silky smooth but my skin may be a little too sensitive, i admit (allergetic person here)
However, the off part is not that much small in my casing.
Also it might be related to how I handle the phone. I use my right hand to hold it and my index finger and middle finger hovers around that problematic edge all the time while using it. I changed my handling (since i cannot change jobs for a manual labor that easily )
anyways, HTC has agreed to send me a back cover without even asking too many questions (obviously to a friend of mine in america) It made me think that, this is a well known issue. If that defect is with the chassis than I'll just wait for HTC desire sell mine after that
I received my replacement battery cover today and unfortunately it also does not fit. I called HTC and they are escalating the issue to the accessories department to have them investigate the battery covers not fitting the recently built Nexus Ones.
cekle
it is saddening to hear that.. the rma life cycle is like hell for me (since i reside in turkey) well, please let us know if ever a fitting cover is sent to you and i will re apply.
I think all the N1s have this defect. Mine is about a quarter of a millimeter off just above the battery. It is actually common in electronics for covers to not fit perfectly.
Do I really care about something being .25 mm off? No.
The better question is, should that be enough to cut your hand or even scratch it?
In any manufactoring there is a "tolarence" that defects have to be under in order to be shipped out. In reality, everything has a defect.
The amount this cover is off is certiantly within most manufactoring tolarences. The N1 isn't going on a space shuttle so there is no need to have a tolarence of .001 mm.
There, you learned somethhing amount engineering and manufactoring.
In all honesty, do I think the tolarence for the cover was a big too high? Yes, but you are building something that costs $175 to make and then turning around and selling it $179 already, some corners must be cut.
arkavat said:
The back case is a little off. And from all the pictures of nexus one... it seems to be the case for everyone. However, nothing that will cut finger. I rubbed my finger on it for 2-3 minutes..nothing.
Everyone else.. look closely.. the metal part between volume and power is slightly visible as compared to smooth side of left. It is very slight and looks like a design change HTC made for placing volume and power key.
Click to expand...
Click to collapse
Mine does not have a gap.
It looks the same on both sides for me.
I'm currently waiting for some new screen protectors to arrive BUT
I have an Invisible Shield Screen Protector sat here..
If I fit this is it easy enough to remove when the others arrive ?
Will it leave any marks or residue ?
Are they any good ?
Thanks
Well if you already have it you might as well use it. I find them a little difficult to fit, rather grippy for touch screen use and frankly they do mark up permanently, they are FAR from invisible or indestructible.
I didnt like mine, i actually removed it and fitted a cheap screen protector i got from eBay (6 for 1.99), and much prefer those.
So no issues removing it ? nor residue, gunk or mess ?
thanks
I would say no.
And no i had mine on for a week, no issue at all removing it, if anything it left my screen sparking clean.
I removed mine in favor of this one by FoneM8:
http://forum.xda-developers.com/showthread.php?t=676449
My invisibleShield had a lot of dust under it.
Removing it was painless and left no trace on the screen. I thought it would had been harder to get off but it was quite easy.
You just pull a corner and peel it back slowly.. Not any different from other screen protectors I guess.
I guess it depends on how careful that you are when you apply it. I took my time and used PLENTY of the supplied application fluid and it is great. Yes it is a little grippy, but grippy is better than slippery....?
I have also put a gel case on over my Desire (i have a proven record of putting my phone in the same pocket as my keys), and to date.....not a mark on the phone / screen.
Take your time applying it and use plenty of fluid is my advise
Thanks.
I'm waiting on my order from FoneM8 !
If they don't arrive today I use the Invisible shield and see how I get on.
As long as it won't mark or leave marks on the screen I may as well use it !
Thanks
i had the invisible Sheila, i removed and returned it for a full refund. it was just to restive for my liking but apart from that it was good.
my desire is now rocking the brando ultra clear, couldn't be happier
Currently go a cheap 5 for £2.90 from Amazon.. seems OK !
I had invisible shield fitted for about two weeks.
Removed it finally as I got too frustrated with it.
Fitting it wasn't exactly a doddle, even using plenty solution.
To get shot of bubbles I ended up marking the skin which didn't self heal as we've heard. That's not why I removed it though.
The skin is too sticky to use for touchscreen use.
I can see how it might be good for a laptop or something, but for smart touch screen phone? Nah - bad idea. I reckon it hot sticky climates, it will be even worse, as sweaty hands/fingers don't get on well with the invisible shield.
Personally I want to get my hands on a hard-ish type protector that has only slight give, so that the touch screen experience isn't flawed...
I said no!
I have a cheap 5 for 2.50 off eBay - after wasting 2 the third went on a treat, you'd never know it was there and no change to touchscreen at all
-------------------------------------
Sent via the XDA Tapatalk App
no don't use it.. i've had my on for bout 2 weeks now and its sucking alot of dust near the edges and what not so i'll be removing them when i'm back from holidays..
yes and no
From my experience of using on various devices and claiming multiple lifetime warranty and countless application, i feel that it's not great for the screen.
It feels "grippy" after applying which is not good when you try to slide your finger on the screen. On the hand on the back of devices it is perfect. It increases grip and prevent fall off from your hand when using one hand(especially people with smaller hands).
For screen, it impacts the clarity but not as bad as anti-glare(matte) screen protector, which I personally hate it. I only applied on the back, sides and button area.
The downside is it takes a lot of patience and time to apply the skin. I took 45 mins. But in the end the effect is simply stunning(if done correctly).
If you don't need the lifetime warranty then you can opt for http://www.bestskinsever.com/htc-desire-skin, USD 8. It's the same sans warranty.
You can check my picasa gallery here
For me it has to be a no, i prefer the HTC screen protector and leather case, i dont go throwing my phone around etc so it suits me fine. I rather than this than an invis shield around my phone but then again i do change my phone a few times each year.
The invis shield is really good but not for me.
Easy to remove, doesnt leave any mess on phone and nope i wouldnt recommend it i just think its stupid and doesnt feel right on the phone
Thanks for the comments.
I decided to wait until my cheap screen protectors arrived.
now fitted and feel good
Cheers
Hey everybody, got a new case review. This one is the infamous Nillkin Fresh, which is Nillkin's second generation of flip covers. To be honest, I got this case because it works with the iloome ScreenMate tempered glass protector I got, which didn't work with any of my other cases.
I got the yellow color, and it looks very nice. The flip has a darker yellow than the snap on part, which looks perfectly fine to me. The flip doesn't stay down for the first few days, and it doesn't have a lock mechanism. But, with a few days use, the flap does stay down on itself. Now, at first it wasn't working with my tempered glass protector, so I just kept stretching the fake leather out, and eventually it stays. I just clamped it so it stayed stretched. This is a very simple case, and if you don't drop your phone a lot (like me) this is a really nice case, it has a soft lining on the inside of the flip, almost like micro-fiber, and it helps keep fingerprints away. I do like this case, but it's not perfect. You can also use it as a stand, just fold it back and slide it into the slot. I absolutely HATE this feature, as the slot sticks out from the back of the case, so I can't use it with the Orb Charger. I forgot to take pictures of it, but it is REALLY annoying. Overall, aside from that one thing, it's a really nice case. :laugh:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
jiayit said:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
Click to expand...
Click to collapse
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
N4ever said:
You could just use a photo editor and re-crop?
Sent by a giant douche
Click to expand...
Click to collapse
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
N4ever said:
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
Click to expand...
Click to collapse
You could have said that without quoting the images all over again....
I have this case too, just never got around to finish writing my review. Mine is mint green (though some product pictures may appear turquoise).
Having a front cover in addition to the case is definitely nice, as I can drop it into my bag without worrying about what is going to hit against the front screen. Also very handy when talking on the phone with the flap covering the screen.
It's not slim as a ringke slim but not thick either, and the phone looks nice in it. I liked that it didn't have an actual lock to keep the cover on because it was easier to flip open.
It's so annoying when your holding it open. No comfortable way to do it.
Sent from my Nexus 4, the only phone approved by Patrick Star
Are the buttons easy to press?
Sent from my Nexus 4 using Tapatalk 4 Beta
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
jiayit said:
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
Click to expand...
Click to collapse
I can see the volume rocker is exposed when you open the case. The power button looks a bit hard. In my current case(looks like the ringke slim) i had to cut off the bar at the top to gain easy access to power button.
Sent from my Nexus 4 using Tapatalk 4 Beta
The way everything folds is just uncomfortable.
Sent from my Nexus 4, the only phone approved by Patrick Star
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Fabriciohss said:
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Click to expand...
Click to collapse
Seems like you got a manufacturing defect.. Why didn't you ask for a refund?
Hung0702 said:
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
Click to expand...
Click to collapse
Sent by a bigger douche who calls people out
Sent by an even bigger douche
Sent from my Nexus 4, the only phone approved by Patrick Star