Database Info

[Q] Help to identify chienese tab

Hi,
Recently i have bought a chienese rebranded tab, so there is no info about the manufacturer. Now I have messed up with the tab so I need the firmware and drivers to flash. If I could knew the manufacturer, then I could download the files I need. Please help me identify the manufacturer. It says it used allwiner A13 boxchip.
here is the specification:
SYSTEM (Android 4.1.1)
Model: HTS-200
Manufacturer: unknown
Device: HTS-200
Product: HTS-200
Brand: HTS
Android Version: 4.1.1 (Ice Cream Sandwich)
API Level: 15
Build ID: IMM76D
Fingerprint: iNet/nuclear_evb_rtl8723au/nuclear-evb-rtl8723au:4.0.4/IMM76D/20130920:eng/test-keys
DISPLAY (800x432)
Size: 800x432
Refresh Rate: 59.75 Hz
Default Orientation: Portrait
Physical Size: 5.68" (14.42 cm)
Logical Size: Normal
Density: 160 dpi (Medium)
Pixels Per Inch: X: 160; Y: 160.42
PROCESSOR (ARMv7)
Processor: ARMv7 Processor rev 2 (v7l)
Cores: 1
Max Frequency: 1200 Mhz
Instruction Sets: armeabi-v7a, armeabi
SIMD Instructions: NEON
MEMORY (353 MB)
System RAM: 353 MB
JVM Max Memory: 48 MB
Internal Storage: 1007 MB
External Storage: 1397 MB
FRONT CAMERA (1.3 megapixel)
BACK CAMERA (1.3 megapixel)
OPENGL 1.1 (Mali-400 MP)
GENERAL
Renderer: Mali-400 MP
Version: OpenGL ES-CM 1.1
Vendor: ARM
LIMITS
Texture Size: 4096x4096
Texture Units: 8
Viewport Size: 4096x4096
Modelview Stack Depth: 32
Projection Stack Depth: 32
Texture Stack Depth: 32
Lights: 8
COMPRESSED TEXTURE FORMATS
ETC1, Paletted
OPENGL 2.0 (Mali-400 MP)
GENERAL
Renderer: Mali-400 MP
Version: OpenGL ES 2.0
Vendor: ARM
GLSL Version: OpenGL ES GLSL ES 1.00
GRAPHIC MODES (RGBA 32bit)
SENSORS (1)
MXC622X 2-AXIS ACCELEROMETER
Vendor: MEMSIC
Range: 2.0 m/s²
Resolution: 0.15322891 m/s²
Power: 0.005 mA

[Q] Firmware for Softwinerf761 china tablet

I have tried the swap internal memory with external memory, but something went wrong, and now my android tablet(Softwinerf761)
shows 0.00b on internal sd, and now i can't install/download apps anymore,
I really need a Fiirmware for my tablet cause I can't find one.
heres the info:
Manufacturer: unknown
Model: Softwinerf761
Android: 4.0.4; 20130131; SDK15
Display: 800 x 480
Touch Screen: Multitouch 5 points
GPU: Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM: 448 MB Flash: 4 GB Build-in (3.749 GB actual)
Processor: 1 core; ARMv7 Processor rev 2 (v7l) exDroid; Max: 1200.0 MHz; Min: 30.0 MHz
Phone: GSM
Wi-Fi: 8192cu
USB Host: Yes Bluetooth: No GPS: Yes
Battery: Technology: LiFe; Voltage: 3886
Camera: Photo: 1.9 MP; Max: 1600x1200; Focus: auto; No flash
Additional Camera: Photo: 0.3 MP; Max size: 640x480; Focus: auto; No flash
I would really appreciate your help

gs702c - Get USB-Endoscope-Camera to work

Hello,
i have a USB-Endoscope-Camera (with 10m cable) to inspect my draining away. This works perfect with my Laptop.
I have a cheap 7" Tablet lying around...and try to get the USB-Camera to work. But no program recognizes the camera.
If i use the App "Dashcam" i get a message: "Device has no UVC Driver". I think that is the problem.
Here is the Device Info:
Code:
KV78PH 21
SYSTEM (Android 4.4.2)
Model: KV78PH-21
Manufacturer: KV78PH-21
Device: gs702c
Product: full_gs702c
Brand: Android
Android Version: 4.4.2 (Kit Kat)
API Level: 19
Build ID: KOT49H
Fingerprint: Android/full_gs702c/gs702c:4.4.2/KOT49H/eng.liuzi.20140701.121506:userdebug/release-keys
DISPLAY (800x480)
Size: 800x480
Refresh Rate: 59,89 Hz
Default Orientation: Portrait
Physical Size: 6,71" (17,05 cm)
Logical Size: Normal
Density: 160 dpi (Medium)
Pixels Per Inch: X: 131,95; Y: 141,77
PROCESSOR (ARMv7)
Processor: ARMv7 Processor rev 1 (v7l)
Cores: 2
Max Frequency: 1308 Mhz
Instruction Sets: armeabi-v7a, armeabi
SIMD Instructions: NEON
MEMORY (1024 MB)
System RAM: 1024 MB
JVM Max Memory: 64 MB
Internal Storage: 993 MB
External Storage: 5805 MB
BACK CAMERA (1,9 megapixel)
SUMMARY
Max Picture Size: 1600x1200 (4:3)
Zoom: 4x
Autofocus: Supported
Orientation: 90°
GRAPHICS
OpenGL 2.0
ACTIONS HARDWARE
actions.hardware.hdmi
ANDROID HARDWARE
android.hardware.bluetooth
android.hardware.camera
android.hardware.camera.any
android.hardware.camera.autofocus
android.hardware.camera.front
android.hardware.faketouch
android.hardware.location
android.hardware.location.gps
android.hardware.location.network
android.hardware.microphone
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.sensor.accelerometer
android.hardware.sensor.compass
android.hardware.touchscreen
android.hardware.touchscreen.multitouch
android.hardware.touchscreen.multitouch.distinct
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.usb.accessory
android.hardware.usb.host
android.hardware.wifi
android.hardware.wifi.direct
ANDROID SOFTWARE
android.software.app_widgets
android.software.device_admin
android.software.home_screen
android.software.input_methods
android.software.live_wallpaper
android.software.sip
android.software.sip.voip
Created with Hardware Info 4.2.6
The App "USB Host Diagnostics" found nothing when i connect the Camera to my tablet. I have testet on an Android Phone from my colleague...the cam works perfect.
I think without a UVC-Driver the Cam will not work. I have read that the UVC-Driver is in the Kernel. But I am not familiar with this.
I dont have found a way to update the Android on the Tablet. I have found no custom rom. Is there perhaps a way to get an other Rom to work?
Is there a way to get the camera to work with these Tablet? It would be better than an expensive smartphone or an expensive laptop to use to inspect sewer pipes.
Many thanks.

I found the source code for the ZTE avid plus firmware. Can someone compile it?

Thanks to ZTE support, I found the source code for the firmware to the ZTE avid plus. However, I don't know how to compile it to use it. Can someone do it for me?
Thanks in advance.
Download link:
Check the comments

ZTE website: http : //opensource . ztedevice . com/
Direct download link:
http : //download . ztedevice . com/device/global/support/opensource/2/20160623_24/P890T09V1 . 0 . 0B13_kernel . tar . gz
(remove the spaces when copying the links)

Hi i was wondering if you could help me root my ZTE avid plus
DROID INFO REPORT
DEVICE
Model: Z828 (P890T09_MPCS)
Manufacturer: ZTE
Baseband Version: -8909_GEN_PACK-1.37903.1.92602.2
RIL Version: Qualcomm RIL 1.0
Build Number: Z828_MetroPCSV1.0.0B21
Build Fingerprint: ZTE/P890T09_MPCS/achill:5.1.1/LMY47V/20170510.112607:user/release-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: Lollipop MR1 (5.1.1)
SDK: 22
DISPLAY
Resolution: FWVGA, 480x854 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 60 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 5 (v7l)
Board: achill
Chipset: Qualcomm Technologies, Inc MSM8909
Cores: 4
Clock Speed: 200 MHz - 1094 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 evtstrm
CPU Governor: interactive
Kernel Version: 3.10.49-g3a1e342
Kernel Architecture: armv7l
GRAPHICS
Renderer: Adreno (TM) 304
Vendor: Qualcomm
OpenGL Version: OpenGL ES 3.0
RAM
Total: 908 MB
Java Heap: 96 MB
STORAGE
Internal: 3.9 GB
EXTERNAL: Not Detected
PRIMARY CAMERA
Resolution: 5 MP
Flash: Yes
Video Resolution: 1280x960
Supported Resolutions:
Image:
2592x1944
2560x1920
2560x1440
2048x1536
1920x1080
1600x1200
1280x960
1280x768
1280x720
1024x768
800x600
800x480
720x480
640x480
352x288
320x240
176x144
160x120
Video:
1280x960
1280x720 (HD)
864x480
800x480 (WVGA)
720x480
640x480 (VGA)
480x640 (VGA)
480x360
352x288
320x240
240x320
176x144
144x176
160x120
SECONDARY CAMERA
Resolution: 1.9 MP
Video Resolution: 1280x960
Supported Resolutions:
Image:
1600x1200
1280x960
1280x768
1280x720
1024x768
800x600
800x480
720x480
640x480
352x288
320x240
176x144
160x120
Video:
1280x960
1280x720 (HD)
864x480
800x480 (WVGA)
720x480
640x480 (VGA)
480x640 (VGA)
480x360
352x288
320x240
240x320
176x144
144x176
160x120
FEATURES
Bluetooth: Yes
Bluetooth LE: Yes
GPS: Yes
NFC: No
USB Accessory: Yes
WiFi: Yes
WiFi Direct: Yes
BATTERY
Technology: Li-ion
Health: Good
SENSORS
kionix-accel
akm09911-mag
ltr559-light
ltr559-proximity
akm09911-orientation
akm09911-mag
Created by Droid Info

whimsiethefluff said:
Thanks to ZTE support, I found the source code for the firmware to the ZTE avid plus. However, I don't know how to compile it to use it. Can someone do it for me?
Thanks in advance.
Download link:
Check the comments
Click to expand...
Click to collapse
Well, I think I am too late in the party...
I rooted my avid Plus a while back and it got somewhat messed up....
I am currently trying to compile CM-12.1 and Lineage 14.1 for this device along with TWRP to try and see if I can revive my phone and yours too! I'm thinking about flashing TWRP through Download mode or Emergency Download Mode using the QWIL program. I have the original frimware file but I have not tried yet. Maybe just replace the original recovery.img with thw TWRP idk.....

any way to upgrade the OS on a THL W3 (not "plus")?

I've got a very cool tiny fairly-smart phone that I've used for traveling, running on OS 4.0.4 . Heavily use whatsapp to contact friends, family, locals on it, but I just found out that around November (2021), WA is going to up their minimum to OS 4.1, so I'll lose it unless I toss this phone and swap the account to a newer phone.
-Does anyone have any clue as to any upgrade OS available for this venerable device?? -There's no OS ugrade available from the manufacturer (THL), unfortunately.
Seems like a massive waste to throw away the phone, in that it does the job, the camera is actually acceptable, Waze and its GPS makes for a good road trip worldwide (of course, covid for now is shutting that down), mini-opera fits OK as a browser, have watched youtube in small airports,-and it's also incredibly sturdy...
Not even sure if I'm one of the remaining few to have one running (got a "new" clone battery from aliexpress, but, heck, it's a clone phone that sings when you turn it on [THL==Technology Happy Life], so that worked out fine ;-).
Just in case, I'm copying the full Droid Info details below here (check out those 2013 specs!! ;-).
Hope someone can help out on this! -No need to get to a very new OS - it doesn't have much space, -even 4.1 is good enough...
-Hmmm, as a thought, -any way to hack it's play service interface to fool apps (let's say WA) to think it's 4.1 ??
Thanks for your help and time!!
DEVICE
Model: CJ ThL (bird77_a_cu_ics2)
Manufacturer: ThL
Baseband Version: MAUI.11AMD.W12.22.SP.V7, 2012/08/20 16:40
RIL Version: mtk gemini ril 1.0
Build Number: CJ-ThL.121008.6577.COM.EN
Build Fingerprint: ThL/bird77_a_cu_ics2/bird77_a_cu_ics2:4.0.4/IMM76D/1349688250:user/test-keys
Bootloader: unknown
Java VM: Dalvik 1.6.0
OS Version: Ice Cream Sandwich MR1 (4.0.4)
SDK: 15
DISPLAY
Resolution: HD, 720x1280 pixels
Software Density: 320 dpi (xhdpi)
Refresh Rate: 48.44 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 0 (v7l)
Board: bird77_a_cu_ics2
Chipset: MT6577
Cores: 2
Clock Speed: 250 MHz - 1001 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU Governor: hybrid
Kernel Version: 3.0.13
Kernel Architecture: armv7l
GRAPHICS
Renderer: PowerVR SGX 531
Vendor: Imagination Technologies
OpenGL Version: OpenGL ES 2.0
RAM
Total: 970 MB
Java Heap: 64 MB
STORAGE
Internal: 2 GB
External: 14.7 GB
PRIMARY CAMERA
Resolution: 8 MP
Flash: Yes
Video Resolution: null
Supported Resolutions:
Image:
640x480
1280x960
1600x1200
2048x1536
2560x1920
3264x2448
Video:
SECONDARY CAMERA
Resolution: 3.1 MP
Video Resolution: null
Supported Resolutions:
Image:
320x240
640x480
1024x768
1280x960
1600x1200
2048x1536
Video:
FEATURES
Bluetooth: Yes
Bluetooth LE: Unknown
GPS: Yes
NFC: No
USB Accessory: Yes
WiFi: Yes
WiFi Direct: Yes
BATTERY
Technology: Li-ion
Health: Good
SENSORS
AMI304 Orientation sensor
ADXL345 3-axis Accelerometer
CM3623 Proximity Sensor
CM3623 Light Sensor
Created by Droid Info

Why not ask OEM whether an upgrade is available or not?

jwoegerbauer said:
Why not ask OEM whether an upgrade is available or not?
Click to expand...
Click to collapse
Sorry, -my fault for being vague:
There is no upgrade from the manufacturer (OEM) available... -I'll try to edit my post up there w that info