As the title says, I am stuck in a bootloop after flashing a wrong version of the magisk_patched.img, I downloaded the files from here.
simple-guide-to-root-device-twrp
Can anyone please advise me on how to get out of this mess i made ?
kk265 said:
As the title says, I am stuck in a bootloop after flashing a wrong version of the magisk_patched.img, I downloaded the files from here.
simple-guide-to-root-device-twrp
Can anyone please advise me on how to get out of this mess i made ?
Click to expand...
Click to collapse
Give more details. What is your firmware build version. Which version did you download and flashed.
Sent from my OP 5 using Tapatalk
Thank you
Thanks for the reply,
My version seems to be 174 and i flashed the magisk_patched.img for version 189,
Post flash it booted fine, but a lot of things like wifi, BT etc weren't working, also magisk wasn't starting, that's when i realised i made that mistake, and so I went back into fastboot mode and flashed the stock boot.img, but then it stopped booting and has been stuck in a boot loop with the Zenfone logo ever since.
smohanv said:
Give more details. What is your firmware build version. Which version did you download and flashed.
Sent from my OP 5 using Tapatalk
Click to expand...
Click to collapse
So, i just downloaded the v.189 WW Firmware and flashed it using adb sideload in recovery mode, and now it's booting up fine...
Your bootloop occurred because you flashed a stock boot.img instead of a patched one. As far as I know this always causes a bootloop because the phone is modified and only boots with Magisk patched boot.img
kk265 said:
So, i just downloaded the v.189 WW Firmware and flashed it using adb sideload in recovery mode, and now it's booting up fine...
Click to expand...
Click to collapse
Did you use stock recovery or Twrp?
EMJI79 said:
Did you use stock recovery or Twrp?
Click to expand...
Click to collapse
I used the stock firmware v189 WW, no TWRP
mmm
regenwurm16 said:
Your bootloop occurred because you flashed a stock boot.img instead of a patched one. As far as I know this always causes a bootloop because the phone is modified and only boots with Magisk patched boot.img
Click to expand...
Click to collapse
I don't think that was the problem, my phone works fine with both stock boot.img and the patched magisk_pathed.img, as long as they matched with the Firmware Version,
Mine was originally v174 on the Firmware side on which i installed a newer magisk_patched.img which was meant for v189
kk265 said:
I used the stock firmware v189 WW, no TWRP
Click to expand...
Click to collapse
It was a good opportunity to check if TWRP flashed stock firmware fine... It should, but someone actually confirming it would have been nice.
Related
Hello I am so new to this things, my S6 got stuck on installing system update. I downloaded official firmware and tried installing it with odin, it passed but then again got stuck installing system update. Can someone please help me, I am from El Salvador and I saved so much to buy this phone. When I go into recovery mode I get TWRP but i dont know what to do.
try downloadmode and install rom again wirh odin??
lambik333 said:
try downloadmode and install rom again wirh odin??
Click to expand...
Click to collapse
I did, same thing it gets stuck on installing system update screen
dbuyck1 said:
I did, same thing it gets stuck on installing system update screen
Click to expand...
Click to collapse
sometimes you have to wait for 10 mins......same as custom rom..
lambik333 said:
sometimes you have to wait for 10 mins......same as custom rom..
Click to expand...
Click to collapse
I waited for almost 5 hours nothing happened
dbuyck1 said:
I waited for almost 5 hours nothing happened
Click to expand...
Click to collapse
If you flashed a stock firmware successfully it will not boot into twrp, flashing a stock firmware will install stock recovery, which means the stock firmware did not flash properly. Have you tried smart switch at all? Are you sure you have the correct firmware to flash through odin?
sofir786 said:
If you flashed a stock firmware successfully it will not boot into twrp, flashing a stock firmware will install stock recovery, which means the stock firmware did not flash properly. Have you tried smart switch at all? Are you sure you have the correct firmware to flash through odin?[/QUOTE
Yes I am sorry I didn't explained that. Atfer I tried to install stock ROM it got stuck, then smart switch didn't recognize the device but I manage to do the emergency recovery thing with model number and s/n but same thing it got stuck on the same installing system update screen. After that I installed TWRP via Odin to try to push a custom ROM zip, I did that but when I tried to install it failed.
Click to expand...
Click to collapse
Download Samsung SmartSwitch and from the upper menu select Emergency Recovery Mode, put your phone in Download Mode and connect it to your computer, enter your model number and S/N when asked, and it will download and install latest firmware for your model.
Sorry, i haven't seen that you already tried that.
dbuyck1 said:
sofir786 said:
If you flashed a stock firmware successfully it will not boot into twrp, flashing a stock firmware will install stock recovery, which means the stock firmware did not flash properly. Have you tried smart switch at all? Are you sure you have the correct firmware to flash through odin?[/QUOTE
Yes I am sorry I didn't explained that. Atfer I tried to install stock ROM it got stuck, then smart switch didn't recognize the device but I manage to do the emergency recovery thing with model number and s/n but same thing it got stuck on the same installing system update screen. After that I installed TWRP via Odin to try to push a custom ROM zip, I did that but when I tried to install it failed.
Click to expand...
Click to collapse
That means TWRP works and Fastboot/Download works. What is the actual Galaxy S6 model? Mine is G920F.
What custom ROM did you try?
What version of TWRP are you using? The wrong one can create issues.
Did you wipe the phone trough TWRP first? Twice? Including internal memory?
Sent from my SM-G920F using XDA Labs
Click to expand...
Click to collapse
I had some issue's when testing the new Magisk and need to get my phone booting again. I sadly only have the stock boot .img for b360 which doesn't help me.
thanks.
Wesley32 said:
I had some issue's when testing the new Magisk and need to get my phone booting again. I sadly only have the stock boot .img for b360 which doesn't help me.
thanks.
Click to expand...
Click to collapse
Shoot, nevermind guys, I actually found a backup boot.img that Magisk made in my /Data/boot_randomstring.img.gz
I just extracted this and flashed in fastboot. worked like a charm. Thanks Magisk!
Wesley32 said:
Shoot, nevermind guys, I actually found a backup boot.img that Magisk made in my /Data/boot_randomstring.img.gz
I just extracted this and flashed in fastboot. worked like a charm. Thanks Magisk!
Click to expand...
Click to collapse
I am in the same situation. I recently unlocked my bootloader and flashed RROS. Now I want to go back to stock. I have the TWRP backup of B385. But I was wondering how can I get the stock recovery back. Do you think the boot.img would help me? If yes, can you please send that to me? My model is FRD-L04
Boot.img
Hey can you send the stock b360 boot IMG haven't found it anywhere?
alexteam4life said:
Hey can you send the stock b360 boot IMG haven't found it anywhere?
Click to expand...
Click to collapse
Which model ?
alexteam4life said:
Hey can you send the stock b360 boot IMG haven't found it anywhere?
Click to expand...
Click to collapse
If it's for L04 you can find it HERE
Sent from my Honor 8 using XDA Labs
Firmware finder will help u find all updates easily
sspunkky said:
I am in the same situation. I recently unlocked my bootloader and flashed RROS. Now I want to go back to stock. I have the TWRP backup of B385. But I was wondering how can I get the stock recovery back. Do you think the boot.img would help me? If yes, can you please send that to me? My model is FRD-L04
Click to expand...
Click to collapse
I mean yes, you will need stock recovery and stock boot to be able to restore back to stock within e-recovery.
Wesley32 said:
I mean yes, you will need stock recovery and stock boot to be able to restore back to stock within e-recovery.
Click to expand...
Click to collapse
Dont need both as far as erecovery is available
Hi,
After some time on custom room I wanted to go back to stock rooted system.
I downloaded the newest version from SamMobile and flashed throug ODIN. It's working perfectly fine but every time when I flash boot.img it's hanging on Samsung logo.
I tried to flash TWRP recovery, and patched Magisk boot.img. I noticed that everytime I flash boot.img and startup the phone, device vibrate twice on starting showing Samsung Logo.
jjocer said:
Hi,
After some time on custom room I wanted to go back to stock rooted system.
I downloaded the newest version from SamMobile and flashed throug ODIN. It's working perfectly fine but every time when I flash boot.img it's hanging on Samsung logo.
I tried to flash TWRP recovery, and patched Magisk boot.img. I noticed that everytime I flash boot.img and startup the phone, device vibrate twice on starting showing Samsung Logo.
Click to expand...
Click to collapse
https://forum.xda-developers.com/s7-edge
*Detection* said:
https://forum.xda-developers.com/s7-edge
Click to expand...
Click to collapse
Your link is incorrect.
jjocer said:
Your link is incorrect.
Click to expand...
Click to collapse
No, your post is incorrect, my link is for the S7 Edge forum where you should be posting your question, this is the S7 flat forum
Oh, I didn't see that, thanks. Can MOD move this threat please?
DO NOT UPGRADE MAGISK TO 19.x OR YOUR PHONE WILL BOOTLOOP!
All you need is an unlocked bootloader.
Install:
1. Download the file for your device
2. Flash via fastboot
Code:
fastboot flash boot boot.img
3. Reboot
4. Install Magisk Manager
Download for Firmware 53.0.A.6.92:
I3113: Download
I4113: Download
If you like my work, press thanks
I would appreciate your Donation
thanks a lot!
My device is I4193, I flashed the your rooted image of I4113(as they have the same boot image).
my device can boot normally, but in magisk manager , the device still shown as unroot.
wang4632 said:
thanks a lot!
My device is I4193, I flashed the your rooted image of I4113(as they have the same boot image).
my device can boot normally, but in magisk manager , the device still shown as unroot.
Click to expand...
Click to collapse
You need to download the boot-magisk.img and not the boot-stock.img
Schritti said:
You need to download the boot-magisk.img and not the boot-stock.img
Click to expand...
Click to collapse
yes, I download the boot-magisk.img. of wihch the file size is a bit larger then stock one.
wang4632 said:
yes, I download the boot-magisk.img. of wihch the file size is a bit larger then stock one.
Click to expand...
Click to collapse
Could you try the I3113 one? Should also boot.
Schritti said:
Could you try the I3113 one? Should also boot.
Click to expand...
Click to collapse
I tried this one. it can boot normally, but magisk manager still shows unroot..
can you please help patching the stock boot image of I4193?
i uploaded the stock boot image, here is the download link:
https://drive.google.com/file/d/1aN-kTQN8g_HodjSqcPr42e-cyvMriDd0/view?usp=sharing
wang4632 said:
I tried this one. it can boot normally, but magisk manager still shows unroot..
can you please help patching the stock boot image of I4193?
i uploaded the stock boot image, here is the download link:
https://drive.google.com/file/d/1aN-kTQN8g_HodjSqcPr42e-cyvMriDd0/view?usp=sharing
Click to expand...
Click to collapse
Here you go
https://mega.nz/#F!DyQDHI5S!BN44I8xHfk8yf-9AFj5axg
Please report if it works, so i can add it to OP
Schritti said:
Here you go
https://mega.nz/#F!DyQDHI5S!BN44I8xHfk8yf-9AFj5axg
Please report if it works, so i can add it to OP
Click to expand...
Click to collapse
it didn't work. same as before, it boot normally, but shows unroot in magisk manager.
Form XperiaFirm, I saw I4193 is only for HongKong and Taiwan, I'm not sure if it has some difference form other models, maybe I can post the patched boot image in some Chinese forums, I hope some more users can help test it .
Schritti said:
DO NOT UPGRADE MAGISK TO 19.x OR YOUR PHONE WILL BOOTLOOP!
All you need is an unlocked bootloader.
Install:
1. Download the file for your device
2. Flash via fastboot
Code:
fastboot flash boot boot.img
3. Reboot
4. Install Magisk Manager
Download for Firmware 53.0.A.6.92:
I3113: Download
I4113: Download
If you like my work, press thanks
I would appreciate your Donation
Click to expand...
Click to collapse
I wiped my device by using newflasher to flash the stock 53.0.A.6.92 firmware and then flashed boot-magisk-I4113, and now it works. I can see root status in magisk manager.
I don't know what is the reason, but anyweay it works now. thnak you!
wang4632 said:
DO NOT UPGRADE MAGISK TO 19.x OR YOUR PHONE WILL BOOTLOOP!
All you need is an unlocked bootloader.
Install:
1. Download the file for your device
2. Flash via fastboot
I wiped my device by using newflasher to flash the stock 53.0.A.6.92 firmware and then flashed boot-magisk-I4113, and now it works. I can see root status in magisk manager.
I don't know what is the reason, but anyweay it works now. thnak you!
Click to expand...
Click to collapse
Great!
Could be because you maybe had your phone rooted with 19.0 on the previous firmware
But i cant install modules from magisk. MMMM, can install, after restart not appear modules in modules part
@Schritti Can you make this for .8.71 firmware if possible please? Many thanks in advance
Chronic2k13 said:
@Schritti Can you make this for .8.71 firmware if possible please? Many thanks in advance
Click to expand...
Click to collapse
You can use my TWRP to flash Magisk 18.1
https://forum.xda-developers.com/xperia-10/development/recovery-twrp-3-3-1-0-unofficial-t3941158
Schritti said:
You can use my TWRP to flash Magisk 18.1
https://forum.xda-developers.com/xperia-10/development/recovery-twrp-3-3-1-0-unofficial-t3941158
Click to expand...
Click to collapse
I don't think it is possible to install magisk without sd card decrypt working.
ToastedToast said:
I don't think it is possible to install magisk without sd card decrypt working.
Click to expand...
Click to collapse
External SD should be fine
I flashed magisk-boot.img and all worked.
Now i wanted to unroot and stupid me, not thinking about what i am doing, i unrooted through magisk manager.
So i'm stuck in a boot loop.
Flashing the stock-boot.img in fastboot mode now got me to fastboot not recognizing my phone anymore.
When i check "fastboot devices" it returns "???????????? fastboot".
Flash mode still allows me to flash another boot.img with "fastboot flash boot stock-boot.img" but that doesn't fix the bootloop.
Any ideas?
Newflasher with xperifirm firmware files. Then factory reset from booted phone to re-gain safetynet
ToastedToast said:
Newflasher with xperifirm firmware files. Then factory reset from booted phone to re-gain safetynet
Click to expand...
Click to collapse
Wow! That worked! Thank you so much!!!
VelocityHD said:
Wow! That worked! Thank you so much!!!
Click to expand...
Click to collapse
blade85 said:
Since I'm in a similar situation can you please send me the links where I can download the original firmware images?
Thanks in advance
Click to expand...
Click to collapse
Forget it I found everything, which Market and Operator did you take? I see there's no Austrian package?
Does anyone also have a european 53.0.A.6.92 firmware? Would need it to be able to root it
Hi all
I just updated to ESG5 version of OREO. The nightmare comes... I cannot boot again now !!
Until I flash back the original version of OREO, that is , with ESG5 bootloader one, it can boot.
However, I cannot use TWRP and root anymore !
Anyone has idea? thanks a lot
AP_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship_meta.tar
BL_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
CP_G930FXXS5ESG5_CP13334970_CL14843133_QB24881129_REV00_user_low_ship.tar
CSC_OZS_G930FOZS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
sonic997 said:
Hi all
I just updated to ESG5 version of OREO. The nightmare comes... I cannot boot again now !!
Until I flash back the original version of OREO, that is , with ESG5 bootloader one, it can boot.
However, I cannot use TWRP and root anymore !
Anyone has idea? thanks a lot
AP_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship_meta.tar
BL_G930FXXS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
CP_G930FXXS5ESG5_CP13334970_CL14843133_QB24881129_REV00_user_low_ship.tar
CSC_OZS_G930FOZS5ESG5_CL14843133_QB24881129_REV00_user_low_ship.tar
Click to expand...
Click to collapse
what version of TWRP are you using? Theyre not all cross compatible
youdoofus said:
what version of TWRP are you using? Theyre not all cross compatible
Click to expand...
Click to collapse
twrp-3.3.1-0-herolte
I have already flashed the following but cannot boot !
no-verity-opt-encrypt-6.0.zip
sonic997 said:
twrp-3.3.1-0-herolte
I have already flashed the following but cannot boot !
no-verity-opt-encrypt-6.0.zip
Click to expand...
Click to collapse
wait, what? what is that file and why are you flashing it? Also, its a zip file, im at work atm and its 756 am and and ive only had 2 sips of my first monster, but as i recall, you only flash tar.md5 files in Odin
youdoofus said:
wait, what? what is that file and why are you flashing it? Also, its a zip file, im at work atm and its 756 am and and ive only had 2 sips of my first monster, but as i recall, you only flash tar.md5 files in Odin
Click to expand...
Click to collapse
I flash TWRP in Odin and flash no-verity-opt-encrypt-6.0.zip in TWRP.
It has a normal boot for previous version of bootloader.
sonic997 said:
I flash TWRP in Odin and flash no-verity-opt-encrypt-6.0.zip in TWRP.
It has a normal boot for previous version of bootloader.
Click to expand...
Click to collapse
ok, that other post made it seem like you were trying to flash that in Odin LoL anyways so, when you do all that and then reboot, it just goes black or does it bootloop?
youdoofus said:
ok, that other post made it seem like you were trying to flash that in Odin LoL anyways so, when you do all that and then reboot, it just goes black or does it bootloop?
Click to expand...
Click to collapse
yes, it just bootloop
Don't use no-verity-opt-encrypt-6.0.zip (you probably don't need it) .
Start all over. Flash the stock ROM with Odin, then flash TWRP, and then flash Magisk (via TWRP).