I ticked repartition in odin - Galaxy S6 Q&A, Help & Troubleshooting

I not ticked re partition when install fw just pda. Phone boots up fine, and work. What problem would be in future? Is dead emmc or not charging? Or bootloop issue, or just turning into dl mode?? Or nothing happened? I try reinstall fw not ticked repartition when i flashed fw with ticked repartition. I do not ticked. Auto ticked repartition itself.. why?

My guess is similar to linux how it requires a bootloader partition, user partition with the is and a swap partition. Don't quote me on it since I'm a novice with Android's file system.

Related

[Q] Phone Beyond Repair? Please HELP!

Hi All,
I think my phone may be done for, but I wanted to ask all of you first. It all started when I booted up my phone, and it went into Stock GB and before I could do anything at all, everything started force closing (i.e. twlauncher, clock, 10 other things etc.) basically the entire OS and the phone would reboot and then again same problem. Sometimes it would get stuck on the ATT "Rethink Possible" screen for a while, and then immediately it would get to the Your phone is locked screen, and everything would be force closing again. I booted up into recovery mode and wiped user data and cache. Nothing. So then I decided to re load the firmware using jscott's completely stock rom. I used ODIN with PIT, PDA, and Phone and let it do its thing. PASS. Once again, phone did the SAME thing over and over. I then thought let me try either a custom ROM or rooted stock GB. I used jscott's "I997UCLB3-CWM-root-deodex.rar" and used ODIN. PASS. Cleared user data, cache, dalvik. Tried to boot. Still SAME problem. Then I thought maybe I could load ICS Custom ROM and fix the issue (a stretch I know, but no idea what else to do). So, I used ADB to push "Infinitum" ICS ROM to the /sdcard Booted to CWM Recovery and installed the zip. The phone rebooted with the blue android logo and then once again, got to the welcome screen and everything started force closing and the phone rebooted.
Am I just out of luck? Any advise would be greatly appreciated. Thanks in advance.
SuperG03
SuperG03 said:
Hi All,
I think my phone may be done for, but I wanted to ask all of you first. It all started when I booted up my phone, and it went into Stock GB and before I could do anything at all, everything started force closing (i.e. twlauncher, clock, 10 other things etc.) basically the entire OS and the phone would reboot and then again same problem. Sometimes it would get stuck on the ATT "Rethink Possible" screen for a while, and then immediately it would get to the Your phone is locked screen, and everything would be force closing again. I booted up into recovery mode and wiped user data and cache. Nothing. So then I decided to re load the firmware using jscott's completely stock rom. I used ODIN with PIT, PDA, and Phone and let it do its thing. PASS. Once again, phone did the SAME thing over and over. I then thought let me try either a custom ROM or rooted stock GB. I used jscott's "I997UCLB3-CWM-root-deodex.rar" and used ODIN. PASS. Cleared user data, cache, dalvik. Tried to boot. Still SAME problem. Then I thought maybe I could load ICS Custom ROM and fix the issue (a stretch I know, but no idea what else to do). So, I used ADB to push "Infinitum" ICS ROM to the /sdcard Booted to CWM Recovery and installed the zip. The phone rebooted with the blue android logo and then once again, got to the welcome screen and everything started force closing and the phone rebooted.
Am I just out of luck? Any advise would be greatly appreciated. Thanks in advance.
SuperG03
Click to expand...
Click to collapse
Have you tried qkster's hiemdall back to stock? http://forum.xda-developers.com/showthread.php?t=1524081
If it doesnt work, try using different computer/usb cable/usb slot
ibCurlyFry said:
Have you tried qkster's hiemdall back to stock? http://forum.xda-developers.com/showthread.php?t=1524081
If it doesnt work, try using different computer/usb cable/usb slot
Click to expand...
Click to collapse
+1
ibCurlyFry said:
Have you tried qkster's hiemdall back to stock? http://forum.xda-developers.com/showthread.php?t=1524081
If it doesnt work, try using different computer/usb cable/usb slot
Click to expand...
Click to collapse
Ok, I did that as well. Same thing happens. Everything completes successfully on the Heimdall 1 click, but when it boots, same problem...
I tried multiple times with multiple computers.
I also tried GTG Unbrick complete stock as well just in case. Same thing...
Anyone else know what I can try / do?
Thanks!
SuperG03
clean your power button?
qkster said:
clean your power button?
Click to expand...
Click to collapse
LOL! Guess we are running out of options...
My situation is the weirdest thing and makes no sense and I hate things that don't make sense...
SuperG03
I would suggest formatting EVERYTHING except the boot partition on the phone and try again to stock. Something is screwed up and is causing the force closes. If you do that and it STILL does this, then there is a hardware failure that is most likely causing the issue.
MrBooMY said:
I would suggest formatting EVERYTHING except the boot partition on the phone and try again to stock. Something is screwed up and is causing the force closes. If you do that and it STILL does this, then there is a hardware failure that is most likely causing the issue.
Click to expand...
Click to collapse
Sounds like a plan. How would I format absolutely everything?
SuperG03
SuperG03 said:
Sounds like a plan. How would I format absolutely everything?
SuperG03
Click to expand...
Click to collapse
Can you get into recovery mode at all? Forgot to mention that.
MrBooMY said:
Can you get into recovery mode at all? Forgot to mention that.
Click to expand...
Click to collapse
Yes, I can get into recovery or download mode.
When I ODIN or Heimdall into the stock, I have 3e recovery. If / When I add CWM entropy kernel then I have CWM red recovery mode.
I have tried wipe user data, cache, dalvik cache, etc. to no avail.
SuperG03
There should be a mounts and storage menu where you can format stuff. Format EVERYTHING except the BOOT partition. IF you format boot you are screwed! Also if you have IMPORTANT info on the external or internal SD card back that up first!!!!!
MrBooMY said:
There should be a mounts and storage menu where you can format stuff. Format EVERYTHING except the BOOT partition. IF you format boot you are screwed! Also if you have IMPORTANT info on the external or internal SD card back that up first!!!!!
Click to expand...
Click to collapse
Oh yes, I have done that several times already. I have mounted everything and then proceeded to format them all. It does keep telling me that sd-ext is not found... (not sure if that is normal)
So to recap, I have tried installing / flashing with the following:
ODIN GTG UCKD5: http://forum.xda-developers.com/showthread.php?t=1116251 Flash PASS - same problem exists
ODIN JScott UCLB3: http://forum.xda-developers.com/showthread.php?t=1705260 Flash PASS - same problem exists
Heimdall qkster UCLB3: http://forum.xda-developers.com/showthread.php?t=1524081 Flash Successful - same problem exists
ODIN JScott UCLB3 Rooted CWM (Entropy's Daily Driver): http://forum.xda-developers.com/showthread.php?t=1613523 Flash PASS - same problem exists
CWM Install ROM Infinity ICS - Successful Install - same problem exists
CWM Install ROM SlimBean (Jelly Bean) - Successful Install - same problem exits
Problem occurs no matter how many data/factory reset wipes I do. As soon as OS boots, everything immediately starts force closing (I can see the welcome screen, but can't get to it with all the force closes on top).
Example of some of the force closes: "android.process.acore has stopped" & "com.google.process.gapps has stopped", etc.
Ran EMMC Brick Find: http://forum.xda-developers.com/showthread.php?t=1823918 and it went through each MB up to 16 GB and said OK.
I think that covers it all.
Anymore ideas on what to try?
If it is hardware, what could it be?
SuperG03
I'm guessing you did let it do the bootloaders on the flash? Other than that it sounds like a serious hardware issue like a failing processor.
SuperG03 said:
Oh yes, I have done that several times already. I have mounted everything and then proceeded to format them all. It does keep telling me that sd-ext is not found... (not sure if that is normal)
So to recap, I have tried installing / flashing with the following:
ODIN GTG UCKD5: http://forum.xda-developers.com/showthread.php?t=1116251 Flash PASS - same problem exists
ODIN JScott UCLB3: http://forum.xda-developers.com/showthread.php?t=1705260 Flash PASS - same problem exists
Heimdall qkster UCLB3: http://forum.xda-developers.com/showthread.php?t=1524081 Flash Successful - same problem exists
ODIN JScott UCLB3 Rooted CWM (Entropy's Daily Driver): http://forum.xda-developers.com/showthread.php?t=1613523 Flash PASS - same problem exists
CWM Install ROM Infinity ICS - Successful Install - same problem exists
CWM Install ROM SlimBean (Jelly Bean) - Successful Install - same problem exits
Problem occurs no matter how many data/factory reset wipes I do. As soon as OS boots, everything immediately starts force closing (I can see the welcome screen, but can't get to it with all the force closes on top).
Example of some of the force closes: "android.process.acore has stopped" & "com.google.process.gapps has stopped", etc.
Ran EMMC Brick Find: http://forum.xda-developers.com/showthread.php?t=1823918 and it went through each MB up to 16 GB and said OK.
I think that covers it all.
Anymore ideas on what to try?
If it is hardware, what could it be?
SuperG03
Click to expand...
Click to collapse
Here are the steps I would try to bring the phone back to a working stock GB. I can only offer a Heimdall approach.
1. Take out your microSD card.
2. Boot into DL mode.
3. Flash this in heimdall: http://forum.xda-developers.com/showpost.php?p=23118162&postcount=3
4. Boot into recovery.
5. In cwm: factory reset. Wipe cache. Advance: wipe dalvik. In Mount: format -system, data, cache, SDCard.
6. Power off.
7: Heimdall UCLB3. http://forum.xda-developers.com/showthread.php?t=1524081. Read the op. Flash it once to complete. If successful, on the PC screen, click the boot loader flash and wait for the phone to complete booting up. After the phone finishes, go to /Settings/Privacy: factory reset and wipe SDCard again. Put it back into DL mode
8. Flash the UCLB3 Heimdall again, with the BootLoader box checked.
9. Once complete, let the phone boot up and run it as stock without the microSD card.
It should run as stock uclb3 - factory new. Go through the set up - do not accept GOGGLE BACKUP for now.
If the phone process continues to crash, you are sol.
gl..
ps..you can always sell the screen..it's worth at least $75-to another user with a broken screen.
qkster said:
Here are the steps I would try to bring the phone back to a working stock GB. I can only offer a Heimdall approach.
1. Take out your microSD card.
2. Boot into DL mode.
3. Flash this in heimdall: http://forum.xda-developers.com/showpost.php?p=23118162&postcount=3
4. Boot into recovery.
5. In cwm: factory reset. Wipe cache. Advance: wipe dalvik. In Mount: format -system, data, cache, SDCard.
6. Power off.
7: Heimdall UCLB3. http://forum.xda-developers.com/showthread.php?t=1524081. Read the op. Flash it once to complete. If successful, on the PC screen, click the boot loader flash and wait for the phone to complete booting up. After the phone finishes, go to /Settings/Privacy: factory reset and wipe SDCard again. Put it back into DL mode
8. Flash the UCLB3 Heimdall again, with the BootLoader box checked.
9. Once complete, let the phone boot up and run it as stock without the microSD card.
It should run as stock uclb3 - factory new. Go through the set up - do not accept GOGGLE BACKUP for now.
If the phone process continues to crash, you are sol.
gl..
ps..you can always sell the screen..it's worth at least $75-to another user with a broken screen.
Click to expand...
Click to collapse
Thanks. I did try exactly as you stated. No go. Still crashing.
I wonder what hardware failure it would be?
SuperG03
Not sure if this will help figure out anything, but if someone is really good at looking at a logcat file, I am attaching one that I obtained from ADB from when the phone started to boot at the ATT Rethink Possibilities Screen all the way through the constant unending force closes of everything as soon as the OS loads.
Thanks again for anyone willing to look this over.
SuperG03
SuperG03 said:
Not sure if this will help figure out anything, but if someone is really good at looking at a logcat file, I am attaching one that I obtained from ADB from when the phone started to boot at the ATT Rethink Possibilities Screen all the way through the constant unending force closes of everything as soon as the OS loads.
Thanks again for anyone willing to look this over.
SuperG03
Click to expand...
Click to collapse
Just a guess and I may be wrong but I looked briefly through the beginning of your logcat. The stock gb kernel should not be looking for /etc/init.d and there were some items listed for voodoo and lagfix and some mentioning of entropy. Is your OS messing up when you are trying to run Entropy's DD kernel?
If you are running a diagnostic with complete stock to make sure the phone and firmware is using complete stock and rfs file system, these items should not be a part of your logcat...
The only suggestion I have is wipe the sdcard and voodoo folder and try a complete re-partition and boot loader flash.
gl
qkster said:
Just a guess and I may be wrong but I looked briefly through the beginning of your logcat. The stock gb kernel should not be looking for /etc/init.d and there were some items listed for voodoo and lagfix and some mentioning of entropy. Is your OS messing up when you are trying to run Entropy's DD kernel?
If you are running a diagnostic with complete stock to make sure the phone and firmware is using complete stock and rfs file system, these items should not be a part of your logcat...
The only suggestion I have is wipe the sdcard and voodoo folder and try a complete re-partition and boot loader flash.
gl
Click to expand...
Click to collapse
This actually isn't with stock. This is with the Entropy DD kernel. I followed your earlier thread to go back to complete stock and same error. I needed CWM to do other things, so I installed the Entropy DD, but same errors. I just happened to dump the logcat during that run.
As far as your suggestion, I believe that is what was already happening with your earlier post? As for RFS file system, does your Heimdal One Click do that already? If not, what do I need to do to create that specific FS? I think it might actually be Fat32 and EXT4? Thanks!
SuperG03
Heya,
Did you ever have any luck with this issue? I've a phone with similar issues.
Odin to stock - force closes and/or boot loops
Heimdall to stock - force closes and/or boot loops
Install various roms through CWM - force closes and/or boot loops
(I followed all directions to the letter, multiple times)
the last attempt lead me through a series of odins/heimdalls/roms ... basically following a path to install the latest CM10, during which sometimes a rom would seem to be stable before I moved on to the next and other roms would bootloop / fc right off the bat ..
once on CM10, though, it was stable... I was able to install apps from the market, play with settings, etc .... I did experience a 2 or 3 random reboots though in the process and ultimately, when I put my sim card and sdcard in, it was stuck in a boot loop
It doesn't appear that I'm experiencing a power button failure like other people are having ... only reason I mentioned it is because of the random reboots

Please help.....repartition internal memory

i flashed Xperia ROM, That says it will repartition Memory but if you wanna go back just repartition from ODIN.
But my i9003 stucked in boot loop...i tried many times to repartition from ODIN..it says " 1044 file not found".
Please help me out ..to repartition
guyrajat said:
i flashed Xperia ROM, That says it will repartition Memory but if you wanna go back just repartition from ODIN.
But my i9003 stucked in boot loop...i tried many times to repartition from ODIN..it says " 1044 file not found".
Please help me out ..to repartition
Click to expand...
Click to collapse
flash latona.pit file in odin...after that flash XXKPE and then DDLF2...ur partition will be restored..

Semibrick. No data partition

Hi!
Yesterday, I was with a friend, de wanted to put C12.1 to a S7580. It was my second time, since I already did the same with a S7582, just files change.
The problem is that it didn't put TWRP, it kept stock recovery, so I marked also Nand Format and maybe more. I had TWRP, but no /data partition. I tried with 3 stock about 10 times and it didn't end booting. I tries also flashing Stock + PIT I found on Internet with Re-partition marked, and also Repartition + Nand Format. But nothing changed.
Any help?
Thanks!
Regards!

Galaxy S7 Exynos stucks in a Bootloop, twrp says internal storage is 0mb

Last evening my phone turned off because of the battery. When trying to turn it on again, i stucked in a bootloop. In twrp it says my internal storage is 0MB and when i try to flash something it "failed to mount /data" and is "unable to mount storage". Is it possible to recover my phone without losing my data?
I'm on Stock Rom and I have latest twrp and magisk installed.
Thanks
~Lukas
Flash stock firmware via Odin if you didn't try yet.
snowqwer said:
Flash stock firmware via Odin if you didn't try yet.
Click to expand...
Click to collapse
I already tried but when i use the home csc to update the software with my data kept, the android encryption fails and i have to factory reset my device
uh oh.. sounds like internal storage failure...

A problem after i wipe data/factory reset

So today I wipe my data/factory reset cuz some apps didn't work for me cause it will pop-up "you have a rooted phone" (i have not) and now, my phone just loops the SAMSUNG logo 24/7, i did install TWRP in my phone and factory reset and wiped data, also tried to "repair" Internal Storage but it will pop up "invalid partition selection" also, after everything that i did it will always say "failed to mount /cpfes". And when i tried to flash with ODIN an original firmware just says error. And in my download mode says "device 9, binary 8" idk how to fix this, i tried to flash the firmware from TWRP by an SD-card but it will say error. I tried to just mount de AP in ODIN too but will say Device 6, binary 5.
please help me, i don't know what to do, and i have downloaded the last firmware too.

Categories

Resources