Free fall detection not working - OnePlus 7 Pro Questions & Answers

The other day my friend was checking my 7pro and he checked the free fall detection of camera. First time i realise that free fall detection on my phone doesn't work at all. Has anyone had this problem? Any solution for this?

Have you tried to release your phone out of your hand? It's not working when you're holding your phone and "simulate" a free fall with your hand.
Just drop your phone into your other hand.

You have to drop it. Works for me.

drop it into your bed
don't"simulate"

Yes, be safe with this test!

My oneplus have same problem
neeraj.17 said:
The other day my friend was checking my 7pro and he checked the free fall detection of camera. First time i realise that free fall detection on my phone doesn't work at all. Has anyone had this problem? Any solution for this?
Click to expand...
Click to collapse
Did you find any solution???
Please help me guys ??

Related

Need help with my G-sensor

Hey guys/gals, I need someone with hardware knowledge. I've been working with my Fuze for a long time and I pretty much have a handle on everything, well almost. My Fuze had a tragic run in with some rain. I was able to get almost everything to work again after complete disassembly and drying. I know, I was as shocked as you all are! Anyway, as you can see from the title, my g-sensor is the only thing not responding. I'm not afraid to dive into my phone if it's something I can repair, but is it a module on the phone? If so, where? I have the manuals but they state nothing about the g-sensor location. I've tried the calibration, but nothing. Anyone have any ideas? Also, I have a thread in the marketplace, looking for a speaker/ringer for the phone. While reassembling, the wire got pinched. Thanks guys, as always.
same problem with me. gsensor is broken. cheiefs please give some clue on repairing.
ozkarah said:
same problem with me. gsensor is broken. cheiefs please give some clue on repairing.
Click to expand...
Click to collapse
The same problem here.., any solution or fix??, why this happend???
lets try to find something common that might be the reason. I will try o write some possible reasons :
1- did you drop the phone recently ?
2- do you use a car phone holder with magnet ?
3- did you left the phone to direct sunlight?
I would guess being submerged in water is what caused it as it says this in the first message.....
ozkarah said:
lets try to find something common that might be the reason. I will try o write some possible reasons :
1- did you drop the phone recently ?
2- do you use a car phone holder with magnet ?
3- did you left the phone to direct sunlight?
Click to expand...
Click to collapse
Teej53214 said:
I would guess being submerged in water is what caused it as it says this in the first message.....
Click to expand...
Click to collapse
But I have the same problem. But it was never submerged to water. I am trying tıo find somthing common among the ones that have the problem.

[Q] Sound from top of the phone when shaking it?

Hi
I recently heard, that if I shake my phone (pretty hard) I can hear something in the the top of the phone (around the camera). It's not much to, but it's there.
Anyone else having this issue?
Thanks in advance
Faspaiso said:
Hi
I recently heard, that if I shake my phone (pretty hard) I can hear something in the the top of the phone (around the camera). It's not much to, but it's there.
Anyone else having this issue?
Thanks in advance
Click to expand...
Click to collapse
Yes lets shake our phone as hard as we can and try our best to hear something. Brilliant!
Now, exactly how is this an "issue"?
i think you'r talking about the OIS...try to open up the camera then try to shake it....i have the same "issue" except its not an issue...
bloodrain954 said:
Yes lets shake our phone as hard as we can and try our best to hear something. Brilliant!
Now, exactly how is this an "issue"?
Click to expand...
Click to collapse
Okay, well not issue and no need to shake that hard. But not just a little left-right between the fingertips shake.
Would just want to know if anything was wrong in my device or it's in all the devices.

Vernee Mars Pro Fingerprint Sensor Broken

I have had this phone for exactly 24 hours, and until then the fingerprint scanner installed in it worked relatively well.
After 24H the sensor decided to activate repeatedly automatically (without me touching the sensor) and finally, stop working.
It will not register any new fingerprints or react to the unlock feature or nothing at all. Rebooting won't fix anything, I have yet to try a hard reset.
My question is, even though the phone is really new, has any of this happened to you guys before?
If so, How have you fixed it?
Thank you and sorry if this is in the wrong section.
Mine arrived yesterday, I will let you know how I get on. Hope you get it sorted.
Off topic: I really want to Root it so that I can use titanium backup but I think its too new! I also ordered a plastic Vernee Mars (not pro) case in the hope that it fits, almost identical dimensions
kyleblyth said:
Mine arrived yesterday, I will let you know how I get on. Hope you get it sorted.
Off topic: I really want to Root it so that I can use titanium backup but I think its too new! I also ordered a plastic Vernee Mars (not pro) case in the hope that it fits, almost identical dimensions
Click to expand...
Click to collapse
I hope it works, mine is still broken, and now the audio doesnt work at all, if im playing music for instance, it will not sound, and every now and then, play 0.1s of the song, it's really a good phone but its getting on my nerves
Also, update me about the case
Also wanting an update on the case, dimensions look to be near enough identical and there are more case option around for the non pro.
So, a new update
The fingerprint scanner decided to work suddenly today, I opened security and decided to see if I could add a fingerprint to unlock it and to my surprise it decided to work.
Regarding the speaker, I found out that if I suck on the speaker (yes, i put my mouth on the speaker hole and aspire air gently) the music, app, game, anything begins playing, and as soon as I stop breathing in it stops playing.
Why is this happening to me? It honestly is super strange, I already contacted gearbest and I hope they help me solve it or give me a new one
Sent from my Mars pro using Tapatalk
May I Ask..
alsetema said:
So, a new update
The fingerprint scanner decided to work suddenly today, I opened security and decided to see if I could add a fingerprint to unlock it and to my surprise it decided to work.
Regarding the speaker, I found out that if I suck on the speaker (yes, i put my mouth on the speaker hole and aspire air gently) the music, app, game, anything begins playing, and as soon as I stop breathing in it stops playing.
Why is this happening to me? It honestly is super strange, I already contacted gearbest
Click to expand...
Click to collapse
Hello... May I ask what part of the world you live in? and how long it took GB to send you the phone? I'm on the fence with this device and the Redmi Note 4.. But I must admit.. your situation is really scaring me and giving me 2nd thoughts about going in this direction.. GB I'm sure will take care of you.. but, what is the return policy? do you pay to have it shipped back? and the down time... weeks?
RaiderWill said:
Hello... May I ask what part of the world you live in? and how long it took GB to send you the phone? I'm on the fence with this device and the Redmi Note 4.. But I must admit.. your situation is really scaring me and giving me 2nd thoughts about going in this direction.. GB I'm sure will take care of you.. but, what is the return policy? do you pay to have it shipped back? and the down time... weeks?
Click to expand...
Click to collapse
I live in western Europe, and it took GearBest about a month to mail me the phone (It is understandable due to the high demand of the phone at the time) If i'm honest, since this is one of the very first units, I am not surprised it has fails, Its prone to happening and I already was expecting something to fail in a very very new chinese phone.
I will update my experience with GB
Thanks For Your Help..
alsetema said:
I live in western Europe, and it took GearBest about a month to mail me the phone (It is understandable due to the high demand of the phone at the time) If i'm honest, since this is one of the very first units, I am not surprised it has fails, Its prone to happening and I already was expecting something to fail in a very very new chinese phone.
I will update my experience with GB
Click to expand...
Click to collapse
Hello Alsetema.. I've decided to stick to my homeland and just buy a device from here..
I wish you all the luck in the world with your issue..:good:
Take Care and I still would like to know how things came out for you!
RaiderWill said:
Hello Alsetema.. I've decided to stick to my homeland and just buy a device from here..
I wish you all the luck in the world with your issue..:good:
Take Care and I still would like to know how things came out for you!
Click to expand...
Click to collapse
Thank you very much!
Sent from my Mars pro using Tapatalk
The case for the mars fits, pretty much perfect. Did you try a hard reset in the end, at all? Mine is working really well although ive heard the phone is compromised by malware/spyware (did manage to find the folder but you can't disable anything) that's why I am trying to root asap. Other thread is here to follow: https://forum.xda-developers.com/android/software-hacking/tutorial-vernee-mars-pro-root-t3652213
Did post this one in another thread but this one seems better:
--
I have this device a week and it's great. Directly installed the OTA of September. Everything worked fine.
Up and until yesterday the fingerprint scanner was really sensitive maybe too sensitive. Then yesterday evening the phone was charged to 100% before I went to sleep so I plugged it out and powered it down to be fully loaded at 100% this morning.
After starting up it seems that the fingerprint print scanner is a lot less sensitive and sometimes it feels sensitivity is degrading during the day of use, to just no sensitivity at all.
Does someone else experienced the same? Does someone have a solution?
Sent from my Mars pro using Tapatalk
FJP84 said:
Did post this one in another thread but this one seems better:
--
I have this device a week and it's great. Directly installed the OTA of September. Everything worked fine.
Up and until yesterday the fingerprint scanner was really sensitive maybe too sensitive. Then yesterday evening the phone was charged to 100% before I went to sleep so I plugged it out and powered it down to be fully loaded at 100% this morning.
After starting up it seems that the fingerprint print scanner is a lot less sensitive and sometimes it feels sensitivity is degrading during the day of use, to just no sensitivity at all.
Does someone else experienced the same? Does someone have a solution?
Sent from my Mars pro using Tapatalk
Click to expand...
Click to collapse
It doesn't seem to be a software problem, but a hardware problem. For me the fingerprint sensor works for some time, then one day it messes up and stops working for a week or so. I really dont know what's wrong, seems to fix by itself.
Sent from my Mars pro using Tapatalk
alsetema said:
It doesn't seem to be a software problem, but a hardware problem. For me the fingerprint sensor works for some time, then one day it messes up and stops working for a week or so. I really dont know what's wrong, seems to fix by itself.
Sent from my Mars pro using Tapatalk
Click to expand...
Click to collapse
Thank, so it is a matter of ups and downs?
I did some gaming while on charge yesterday so maybe some heating can cause this?
I also have some Bluetooth issues while calling on my carkit. Music on my carkit is fine. Will an app like Bluetooth Auto connect be of any help?
Besides that I really like the phone overall.
Sent from my Mars pro using Tapatalk
FJP84 said:
Thank, so it is a matter of ups and downs?
I did some gaming while on charge yesterday so maybe some heating can cause this?
I also have some Bluetooth issues while calling on my carkit. Music on my carkit is fine. Will an app like Bluetooth Auto connect be of any help?
Besides that I really like the phone overall.
Sent from my Mars pro using Tapatalk
Click to expand...
Click to collapse
Yes, it seems to be a matter of ups and downs, same with the speaker. Apparently when the humidity is high, my speaker refuses to work at high volumes ( it crackles and then it stops working)
My charger blew up recently actually (But that was because of some problem with my home's powerline). I got a Samsung charger, slightly slower charge, but my battery now lasts for much longer I have realises (I'm speaking 9V charging instead of 12V)
It is true the phone heats a lot, that's why I'd avoid using it while charging or at least if I plan to charge it all the way, since by the end it will be really hot.
Regarding bluetooth, I really havent had any problems whatsoever, therefore I can't really tell, for me bluetooth has always worked well with cars and speakers and so. I doubt an app like that be of any help, since it should pair automatically with the closest bluetooth source so perhaps that could cause a conflict, but I havent tried it so I can't know for sure.
alsetema said:
Yes, it seems to be a matter of ups and downs, same with the speaker. Apparently when the humidity is high, my speaker refuses to work at high volumes ( it crackles and then it stops working)
My charger blew up recently actually (But that was because of some problem with my home's powerline). I got a Samsung charger, slightly slower charge, but my battery now lasts for much longer I have realises (I'm speaking 9V charging instead of 12V)
It is true the phone heats a lot, that's why I'd avoid using it while charging or at least if I plan to charge it all the way, since by the end it will be really hot.
Regarding bluetooth, I really havent had any problems whatsoever, therefore I can't really tell, for me bluetooth has always worked well with cars and speakers and so. I doubt an app like that be of any help, since it should pair automatically with the closest bluetooth source so perhaps that could cause a conflict, but I havent tried it so I can't know for sure.
Click to expand...
Click to collapse
This morning I took it of the charger. Now fingerprint is quite acceptable. Not that over sensitivity which I disliked, and a lot more responsive than yesterday.[emoji2]
Sent from my Mars pro using Tapatalk
FJP84 said:
This morning I took it of the charger. Now fingerprint is quite acceptable. Not that over sensitivity which I disliked, and a lot more responsive than yesterday.[emoji2]
Sent from my Mars pro using Tapatalk
Click to expand...
Click to collapse
It seems to fix by itself
Sent from my Mars pro using Tapatalk
alsetema said:
It seems to fix by itself
Sent from my Mars pro using Tapatalk
Click to expand...
Click to collapse
Cheered too early, messed up again... It seems that a moist finger works better. It notice the touch better, but then it doesn't recognizes it....
Bleutooth calling went ok today. Seems though that I have the P20 or P25 lite version of the Mars Pro. Not the regular P2t
Should have chosen the Xiaomi Note 4 Global instead... I will monitor it a couple of days but I think I will look for a better 64gb/6gb USB type-c device in the near future....[emoji19]
Sent from my Mars pro using Tapatalk

Auto rotate / accelerometer seems to be faulty :(

I have tried reinstalling the os, root and unroot. Before the newest update I could get into the debug menu, *#808#, there I could see that the accelerometer is giving faulty data. After the update I can't even get into that menu again.
Seems to be a faulty sensor and something with the software. My facking phone is 2 days old........
Anyone else having this problem? Any ideas?
Yeah autorotate sucks for me. Anytime I'm on YouTube and try to watch in landscape it's hit amd miss and i have to keep moving phone to get it to work
hallo dare said:
Yeah autorotate sucks for me. Anytime I'm on YouTube and try to watch in landscape it's hit amd miss and i have to keep moving phone to get it to work
Click to expand...
Click to collapse
Damn. Sounds bad too.
I noticed this while playing Asphalt8 using the accelerometer to steer. It would work for a bit then get stuck trying to drive me into the side of the road!!!
Thinking it may be a bug in the game, I looked at the raw sensor data using Physics Toolbox Suite and saw the same thing. The sensor outputs sensible data for several seconds, maybe even a couple of minutes. Then the values stop changing for about 12 seconds. The length of time the sensor works for is random but the 'dead time' is always about 12 seconds!
Has anyone found a solution to this? Even a hint as to whether it's a software or hardware problem so I can decide if I should send the phone back or wait for an update.
Thanks
Okay thank God someone else has the same issue. I was wondering what was so wrong for the longest time ?
Extremely annoying issue.
It's a software issue. Confirmed.
When I reboot the phone the issue dissapears. Meaning there is something wrong in the OS that tilts the gyroscope readings. At least there is a workaround... Hope OP fixes it soon
I used an OnePlus 5 for 2 years. Now I bought a 7 Pro. I'm wondering doing a downgrade due to this issue. Incredible how a company like oneplus and a premium phone has a software bug like this and there's still no update yet. Months without an update...
The fingerprint sensor also has a bug... Sometimes it simply doesn't work. The touch stops...
OnePlus! Where are you?

Screen wakeup while proxi sensor covered

Since I got the phone, while in pocket, I reject/answer 80% of the calls. I was under the effect of "yay nexus is back, google finally gave us a cheapster" so didn't really got bothered. But days are passing by and it's getting quite annoying, so to the point, could anybody tell me why this phone wakes up the screen on incoming calls when the proximity sensor is covered (ie. in pocket?) (if it's "normal" to do so, then why?). Proxi switch is fine, it triggers during calls and shows activity on sensor testing apps and whatnot. Default calls screen and whatsapp incoming calls, (heck I can unlock the phone with the fingerprint reader in my pocket without taking it out, now explain that.) ... Cherry on top the "slide to answer" thingy is vertical, so yeah there is the problem (while sliding it out from the pocket, it answers or rejects the call). I'm considering throwing it out lol it's so annoying lately. Android 9 was the same? (I had 3 android one phones to fill the superexpensive 3 generation pixel gap) Was I living under a rock? Can anyone try it? Thanks for the helpful inputs in advance.
strapabiro said:
Since I got the phone, while in pocket, I reject/answer 80% of the calls. I was under the effect of "yay nexus is back, google finally gave us a cheapster" so didn't really got bothered. But days are passing by and it's getting quite annoying, so to the point, could anybody tell me why this phone wakes up the screen on incoming calls when the proximity sensor is covered (ie. in pocket?) (if it's "normal" to do so, then why?). Proxi switch is fine, it triggers during calls and shows activity on sensor testing apps and whatnot. Default calls screen and whatsapp incoming calls, (heck I can unlock the phone with the fingerprint reader in my pocket without taking it out, now explain that.) ... Cherry on top the "slide to answer" thingy is vertical, so yeah there is the problem (while sliding it out from the pocket, it answers or rejects the call). I'm considering throwing it out lol it's so annoying lately. Android 9 was the same? (I had 3 android one phones to fill the superexpensive 3 generation pixel gap) Was I living under a rock? Can anyone try it? Thanks for the helpful inputs in advance.
Click to expand...
Click to collapse
There is no pocket mode on stock firmware. If you'd like to add one you can use Edxposed and the dark tricks module.
Sent from my Google Pixel 3a XL using XDA Labs
As hard as I'm trying, I start to see it's nearly impossible to be completely satisfied with the stock android experience. I gave up rooting, flashing, modding long time ago. Ain't got time for that. This leaves one choice, a sad but with time will get used to it.
strapabiro said:
As hard as I'm trying, I start to see it's nearly impossible to be completely satisfied with the stock android experience. I gave up rooting, flashing, modding long time ago. Ain't got time for that. This leaves one choice, a sad but with time will get used to it.
Click to expand...
Click to collapse
Do all 3a do this? I am looking into buying one but don't want to deal with something like that. This is exactly the reason I decided not to buy Galaxy S10e - just try to Google "S10 proximity sensor". It was never officially acknowledged/fixed by Samsung and over the time people just seem to "get used to it" and stop talking about it.
I don't know mate, that's why I asked others to try it please, it's really getting on my nerves and funny thing is, these kind of problems are a hit or miss on warranty claims ... doesn't even worth to try ... and I don't want to take this to reddit either because it'll only get downvoted to a lower than hell level by biased fanboys not to mention the google product forums with the "platinum product experts" and their generic "try this and try that" answers.
So yeah I'm angry.
strapabiro said:
I don't know mate, that's why I asked others to try it please, it's really getting on my nerves and funny thing is, these kind of problems are a hit or miss on warranty claims ... doesn't even worth to try ... and I don't want to take this to reddit either because it'll only get downvoted to a lower than hell level by biased fanboys not to mention the google product forums with the "platinum product experts" and their generic "try this and try that" answers.
So yeah I'm angry.
Click to expand...
Click to collapse
I never had issues, but probably I don't understand the issue yet, so I have a question: how do you know screen is waking up in pocket? For sure it's waking up if you move the device, i.e. take is off the table or turn it around. Are you sure screen switches on in the pocket and not while you are taking it out?
AndDiSa said:
I never had issues, but probably I don't understand the issue yet, so I have a question: how do you know screen is waking up in pocket? For sure it's waking up if you move the device, i.e. take is off the table or turn it around. Are you sure screen switches on in the pocket and not while you are taking it out?
Click to expand...
Click to collapse
You can test by trying to unlock the device while covering the proximity sensor.
Without any mods it'll unlock.
But like that's the main benefit to a Google phone running stock firmware. It's a perfect base for mods.
Sent from my Google Pixel 3a XL using XDA Labs
Skittles9823 said:
You can test by trying to unlock the device while covering the proximity sensor.
Without any mods it'll unlock.
But like that's the main benefit to a Google phone running stock firmware. It's a perfect base for mods.
Sent from my Google Pixel 3a XL using XDA Labs
Click to expand...
Click to collapse
This ... Or cover like 80% of the screen, leave only a small bar uncovered on the lower part of the phone (usbc port side) and ask someone to call you. You'll see on the remaining uncovered part that the screen woke up which is hilarious. Honestly at this point I don't understand how a feature like this can be overlooked by r&d.
Sadly modding is no option for me, for safety and other reasons.
There is another thread about this in the 3a xl section, hope it doesn't count as duplicate.
strapabiro said:
Sadly modding is no option for me, for safety and other reasons.
Click to expand...
Click to collapse
What reasons? This is a Google phone. You're allowed to unlock the bootloader and flash modified software without breaking warrantee.
If you have issues, it's easy to just flash the factory image back to completely stock and relock the bootloader.
Sent from my Google Pixel 3a XL using XDA Labs
@strapabiro,
Have you tried this app?
Skittles9823 said:
What reasons? This is a Google phone. You're allowed to unlock the bootloader and flash modified software without breaking warrantee.
If you have issues, it's easy to just flash the factory image back to completely stock and relock the bootloader.
Sent from my Google Pixel 3a XL using XDA Labs
Click to expand...
Click to collapse
You're shifting the subject, but the short answer is, imagine I never had an apple product in my life but I rather buy an iphone than start doing that But that's me and that's another topic like I said, thanks though.
strapabiro said:
You're shifting the subject, but the short answer is, imagine I never had an apple product in my life but I rather buy an iphone than start doing that But that's me and that's another topic like I said, thanks though.
Click to expand...
Click to collapse
Fair argument.
Sent from my Google Pixel 3a XL using XDA Labs
Today I had my phone in my coat pocket at an appointment for about an hour hanging on a coat rack not even being touched. When I came back to, the screen was on, on the lock screen, and if was pretty warm with battery down a good 25 percent. I'm wondering if what you're talking about here has something to do with this? I was confused why or what was going on with it. No unusual apps were in memory in developer settings.
kc6wke said:
@strapabiro,
Have you tried this app?
Click to expand...
Click to collapse
I have found this "feature" annoying as well on my 3a XL. However I tired the app that you suggested and it seems to work fine. Thanks for providing a decent solution to the OPs question.

Categories

Resources