My OnePlus 7 Pro got hard brick maybe
i can't touch anything and can't get into TWRP and can't get into the Oxygen OS. It's only connected to the bootloader, and it's impossible to handle it with adb. Please help me.
+ my cell phone is unlocked.
K.ore.A Rig said:
My OnePlus 7 Pro got hard brick maybe
i can't touch anything and can't get into TWRP and can't get into the Oxygen OS. It's only connected to the bootloader, and it's impossible to handle it with adb. Please help me.
+ my cell phone is unlocked.
Click to expand...
Click to collapse
You didn't look very hard. The guide was on page 3 and easily found using search.
And FYI, OP, access to bootloader is still a soft brick (to my knowledge). Hard brick gives no response to charger, power button, computer USB port, etc.
Related
Since Xiaomi and Micro$oft released a public ROM of Windows 10 Mobile for Mi4, the curiosity drives me to try it. But I felt so uncomfortable after successfully installed win10 on my mi4.
So I decided go back to Android roms. But sh*t happened - my mi4 got bricked during the flashing.
Phone won't boot with black screen and no boot options. Holding any buttons (including power button + volume down more than 2 minutes) won't work.
The pc can not recognize a USB device after it is plugged in (in both Windows XP and Windows 8.1).
Then I plug it into my Mac OS X with a VirtualBox of Windows 7 OS inside.
The USB devices shows a unknown device of id 05C6:F006.
I did a lot of googling of 05c6:f006 which seems to be 05c6:9008 and something Qualcomm related.
And the most important thing is to make my computer to recognize it.
So things I need to figure out:
Is my phone hardware damaged or software damaged (hard bricked or soft bricked)?
Do I need to disassemble it?
How can I make my pc to recognize it ?
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
darkmaster566 said:
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
Click to expand...
Click to collapse
My phone was recognized as a USB input device, VID_05C6&PID_F006, seems to be Qualcomm_QHSUSB 9008 related
I have exacly the same probleme here, do you have find any solution ?
If it's getting recognised, we can try flashing another recovery or directly boot into recovery from command prompt by using command fastboot boot recovery.img
Try this and let me know if it works
xiaomi mi4 lte not turn on
darkmaster566 said:
If it's getting recognised, we can try flashing another recovery or directly boot into recovery from command prompt by using command fastboot boot recovery.img
Try this and let me know if it works
Click to expand...
Click to collapse
Good evening. I have a problem with my Xiaomi 4 lte, after trying to return from 6 to android 4.4 android after this tutorial : ]Now the phone does not start, if you stick to connect to PC loaded or red LED flashes once and the computer sounds like something I plugged in but not afiseaja nimicc device. He is charged for 24 hours and not start and MIFLASH program is not found
Mi4w hard brick
darkmaster566 said:
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
Click to expand...
Click to collapse
Hey! I had bymistakely flashed wrong partition and tried flash in miii 6.3.3 ROM....
Now my device is bricked....Whenever i connect to charger the red light blinks....And when connected to pc....The red light comes.....But no drivers come on my pc...Means its to recognising.....Can you help me please????
Strangest "Bricked" Oneplus One: No recovery, locked OS, can't unlock bootloader
Hi there, I've come in to the possession of the most stubbornly bricked phone that I've ever seen . Bought a OPO off Craigslist, someone cracked the screen and sold it for cheap instead of fixing it. It had been remote wiped but still has some strange difficult software. Posted this problem to the Oneplus Forum but have had no response, thought XDA would be more qualified!
From what I can tell it's a Oneplus One that was sold through a re-seller that replaced all the software on the phone with a high-security version of Android. It's called EncroChat and from their website (encrochat.network or encrochatsure.com) it looks like it removes the recovery from the phone and replaces it with an EncroChat OS (some kind of Cyanogen) that you can boot to in addition to the Android OS.
Well I assume during the remote wipe something went wrong with the software and the phone no longer really functions. It boots up fine but can't connect to Wifi, cellular, not detected when connected to my PC, and has no real apps to speak of. I think most of the device's drivers are missing. Trying to boot to recovery instead boots to their EncroChat OS which is locked behind a password that neither I nor the person I bought it from knows.
I can get to fastboot and my PC will detect the phone then but running the bootloader unlock command doesn't work, the phone just reboots into the locked EncroChat OS. My idea now is to try and hardbrick the phone and then re-do everything on the phone over again, but I can't figure out how to do that. Does anyone else have any ideas?
Contacting EncroChat
Tried contacting EncroChat via email form, twitter, and reddit. No luck! Still stuck with this. I want to try this unbrick guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 for hardbricks but I can't get my phone to show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008. Any idea how I can do that? This guy seems to have done it:
evronetwork said:
Had one GOOD soft brick in the past, I've used coloros rom(from the Chinese OnePlus One) and fix my phone ...it deleted all media of course but manage to unbrick the phone. Don't ask me how to, it's been a while, google it
It would fix even the most stubborn soft bricks you'll see. Before that I tried everything that was available at the time, no boot as well only fastboot(not even recovery)
Click to expand...
Click to collapse
broccolicakes said:
Tried contacting EncroChat via email form, twitter, and reddit. No luck! Still stuck with this. I want to try this unbrick guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 for hardbricks but I can't get my phone to show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008. Any idea how I can do that? This guy seems to have done it:
Click to expand...
Click to collapse
For your phone to be recognized in your PC as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008, you need to install proper drivers. follow this guide
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
let me know, if I can help you furthermore.
broccolicakes said:
Tried contacting EncroChat via email form, twitter, and reddit. No luck! Still stuck with this. I want to try this unbrick guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 for hardbricks but I can't get my phone to show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008. Any idea how I can do that? This guy seems to have done it:
Click to expand...
Click to collapse
Hello dude,
While it was quite some time when I did this unbrick, it was successful ...expect ALL data to be deleted from phone. Google is your friend and I did get all the files from somewhere
You use a special software from the phone, it's coloros software and with provided files it recognise the phone and flash it(2-3 seperate flashes through the software if I remember correctly) - don't worry as long as the phone turns on(mine was turning on but did nothing ...blank, only way to turn it off was to hold power button and hold it(forced turn off))
P.S. The phone wasn't recognised by the OS ...only from this app(cool? ..weird if you ask me - I'm a computer repair tech guy and find this hard to believe if it didn't happen and see it with my own eyes - on the other hand it could be somewhere hidden in the system and recognised like something else so I won't put my hand in fire to verify this )
Thanks!
evronetwork said:
Hello dude,
While it was quite some time when I did this unbrick, it was successful ...expect ALL data to be deleted from phone. Google is your friend and I did get all the files from somewhere
You use a special software from the phone, it's coloros software and with provided files it recognise the phone and flash it(2-3 seperate flashes through the software if I remember correctly) - don't worry as long as the phone turns on(mine was turning on but did nothing ...blank, only way to turn it off was to hold power button and hold it(forced turn off))
P.S. The phone wasn't recognised by the OS ...only from this app(cool? ..weird if you ask me - I'm a computer repair tech guy and find this hard to believe if it didn't happen and see it with my own eyes - on the other hand it could be somewhere hidden in the system and recognised like something else so I won't put my hand in fire to verify this )
Click to expand...
Click to collapse
I figured it out, thanks ! Now I'm stuck with a more minor problem of only having 16gb visible on my 64gb phone. Can't write the userdata_64G image to my phone. Still trying some stuff out and I'll probably just make a new post if I can't get it to work. Thanks again!
broccolicakes said:
I figured it out, thanks ! Now I'm stuck with a more minor problem of only having 16gb visible on my 64gb phone. Can't write the userdata_64G image to my phone. Still trying some stuff out and I'll probably just make a new post if I can't get it to work. Thanks again!
Click to expand...
Click to collapse
I read just the other day that someone needs the 64gb image instead of the 16gb image. You did so well so far, I'm sure you'll figure this one out. Congrats! "Encrochat Beware!"
The mention of the 64gb vs 16gb image is here:
https://forums.oneplus.net/threads/solution-recover-from-hard-bricked-oneplus-one.104943/
He links to the images here:
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
help
broccolicakes said:
I figured it out, thanks ! Now I'm stuck with a more minor problem of only having 16gb visible on my 64gb phone. Can't write the userdata_64G image to my phone. Still trying some stuff out and I'll probably just make a new post if I can't get it to work. Thanks again!
Click to expand...
Click to collapse
Hi broccolicakes, cane you please tell me how you figured it out. Because Am at your same position with an Oneplus x ??
please tell me how you did it????
redi.c said:
Hi broccolicakes, cane you please tell me how you figured it out. Because Am at your same position with an Oneplus x ??
please tell me how you did it????
Click to expand...
Click to collapse
Hi there, sorry in advance this might not be very helpful in your situation. I ended up using the ColorOS repair tool for Oneplus One that I mentioned earlier in the post. It turned out I just didn't have the correct drivers so once I sorted those out the tool was able to bypass all the software and replace everything on the phone so that I could then install my own OS.
I guess the trick would be to find a version of this tool for OneplusX. I'm not sure if there is one available, I haven't looked. Maybe make a separate post about that? The ColorOS tool I'm talking about is from here: http://forum.xda-developers.com/showpost.php?p=55024864&postcount=136 and it just looks directly for the Qualcomm chip and writes to that. I'm not sure where that tool came from, if it made its way out of Oneplus directly or if someone created it afterwards...
Hello XDA Members,
I have recently bought a OnePlus 7 Pro (GM1915) T-Mobile, Oxygen OS 10.0.3.GM31CB
off of the Mercari app. The sim is locked. I was hoping I could get some assistance to
have it where it can work with my ATT carrier. Willing to dole out $$$ for help.
Is it carrier locked or blacklisted?
HanzoMain said:
Hello XDA Members,
I have recently bought a OnePlus 7 Pro (GM1915) T-Mobile, Oxygen OS 10.0.3.GM31CB
off of the Mercari app. The sim is locked. I was hoping I could get some assistance to
have it where it can work with my ATT carrier. Willing to dole out $$$ for help.
Click to expand...
Click to collapse
I bought a TMO version and converted it to global/international and it works fine on ATT. Just find the thread in Guides and follow the steps.
PhillyFlyer said:
I bought a TMO version and converted it to global/international and it works fine on ATT. Just find the thread in Guides and follow the steps.
Click to expand...
Click to collapse
I'll give this a shot:good:
PhillyFlyer said:
I bought a TMO version and converted it to global/international and it works fine on ATT. Just find the thread in Guides and follow the steps.
Click to expand...
Click to collapse
It's locked and I don't think it's possible without OEM UNLOCK plus TWRP and Root not sure but not found any thing about it
Just ented edl mode . Phone totally powered off , download this. Unzip , and run the msmdownload tool. If needed just download qualcomm drivers. Once ran the exe just press vol up and down at the same time during 4 or 5 seconds (before this keep the usb plugged in the computer but not the phone connector side). After the seconds just plug the cable onto the phone connector and wait unitl the program shows Connected or Ready. Once this is done just click Star and wait for the process to be done. After that just wait the phone boot and unlock bootloader if wished.
YazumiWuHung said:
Just ented edl mode . Phone totally powered off , download this. Unzip , and run the msmdownload tool. If needed just download qualcomm drivers. Once ran the exe just press vol up and down at the same time during 4 or 5 seconds (before this keep the usb plugged in the computer but not the phone connector side). After the seconds just plug the cable onto the phone connector and wait unitl the program shows Connected or Ready. Once this is done just click Star and wait for the process to be done. After that just wait the phone boot and unlock bootloader if wished.
Click to expand...
Click to collapse
What do you mean by "before this keep the usb plugged in the computer but not the phone connector side)"
YazumiWuHung said:
Just ented edl mode . Phone totally powered off , download.... Unzip , and run the msmdownload tool. If needed just download qualcomm drivers. Once ran the exe just press vol up and down at the same time during 4 or 5 seconds (before this keep the usb plugged in the computer but not the phone connector side). After the seconds just plug the cable onto the phone connector and wait unitl the program shows Connected or Ready. Once this is done just click Star and wait for the process to be done. After that just wait the phone boot and unlock bootloader if wished.
Click to expand...
Click to collapse
Looks like msmdownload tool hangs after click "Start".
I got a message "Param preload" in column "Status of Last Communication". Time is ticking but nothing happens.
What can provoke the issue? I use Windows 2008 Server. Can it cause the issue with msmdownload tool?
ok first pull up ur device manager and (ok there is a couple of different ways some ppl just like to argue. It is what it is.) Me personally this is how i do it ok. Just me it works everytime Hey its oneplus.
I reboot to the bootloader by powering off phone. thwn hold volume down and power button at the same time. When the oneplus logo appears you can let off. It mighttake you to the recovery screen or straight to the bootloader but that doesnt matter at all really if it takes you to recover the stock recovery go advance then bootloader yes and yes. Now your in the bootloader. You dont really have to be in the bootloader to do this for real. I chose to. then I plug my phone in and I leave the phone powered on ok now you wanna have your device manager ready and up cause some these phones you have like 10 secs. your going to hold the volume up and down and power button all 3 down together make sure your hands are comfortable cause sometimes it takes awhile. but if dide right your screen should be black. Now on your device manager you are goona expand the port section make sure that driver says quacomm hs-usb Qdloader 9008 ok now once it says that and u installed the right one I cant really tell you which one to use. really cause i went through alot the one i ended up with is the microsoft catalog (google oneplus 7 pro qualcomm hs-usb qdloader 9008 and take from there. and make sure u installed the lt drivers that came with the msm tool. install all certificates all that stuff. If done right. It will not freeze up It will have a green bar and it will be doing its thing for like 2-3 mins.
GUYS I NEED SOME URGENT HELP.
I bricked my phone accidentally by trying to relock my Oneplus 8t coming from EVOLUTION X. It's showing me "Your device is corrupt. It can't be trusted and will not boot". I really don't want to hand it back to customer support since it's my only phone. If someone can give me a solution, it would be great of them.
Thank you very much.
sniper_rifle said:
GUYS I NEED SOME URGENT HELP.
I bricked my phone accidentally by trying to relock my Oneplus 8t coming from EVOLUTION X. It's showing me "Your device is corrupt. It can't be trusted and will not boot". I really don't want to hand it back to customer support since it's my only phone. If someone can give me a solution, it would be great of them.
Thank you very much.
Click to expand...
Click to collapse
I would recommend using the msm tool for the correct region (check the guide forum for links) that will wipe your device and restore it to stock.
Qnorsten said:
I would recommend using the msm tool for the correct region (check the guide forum for links) that will wipe your device and restore it to stock.
Click to expand...
Click to collapse
I have already tried using the MSM tool. I can't even get my phone into recovery mode, how I am suppposed to use that application then?
You sure you can't get into edl mode by following these instructions? It is almost impossible to hardbrick a OnePlus 8t so it can't access edl mode
Power your device off.
Let it cool down for one minute.
Hold both volumes in to get in Qualcomm EDL mode and the screen will stay black. While holding, plug in the USB cable from your phone to your computer. Let volumes go alter plugged in.
Wait some time (should not be longer than ~300 seconds).
Enjoy your brand new device.
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Qnorsten said:
You sure you can't get into edl mode by following these instructions? It is almost impossible to hardbrick a OnePlus 8t so it can't access edl mode
Power your device off.
Let it cool down for one minute.
Hold both volumes in to get in Qualcomm EDL mode and the screen will stay black. While holding, plug in the USB cable from your phone to your computer. Let volumes go alter plugged in.
Wait some time (should not be longer than ~300 seconds).
Enjoy your brand new device.
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Click to expand...
Click to collapse
No I just tried that. It doesn't work. Any other tips please?
If msm tool won't work and if If you can't access fastboot to try and flash a rom there. I think contacting customer service and sending it in for repair is your only choice.
sniper_rifle said:
No I just tried that. It doesn't work. Any other tips please?
Click to expand...
Click to collapse
Keep trying... It can be really tricky to get the timing right. It took me a while to finally get it connected when I used the MSM tool. I can't remember what finally did the trick, but if I remember correctly, the phone screen was still black so it didn't seem like anything was happening but the computer showed it connected.
Hello. Just an update, I managed to get my phone back to life by using the MSM tool and installing the Qualcomm drivers (this part which I hadn't done before) and it worked out. Thank you very much. I love the OnePlus community!
Hi, I'm having a brick issue with my moto g100, OEM is locked so I can't flash/boot anything. My only hope of getting it back is booting into EDL and blankflashing the device... problem is, I can't find a way to do so. Does anybody here know how to enter EDL mode with this phone? I've tried several button combinations, EDL cable, but nothing works. The only thing I've left to try is shortening the mobo pins, but I don't know which ones, let alone if the board even has them.
Any help would be appreciated. Thanks!
lucasdb94 said:
Hi, I'm having a brick issue with my moto g100, OEM is locked so I can't flash/boot anything. My only hope of getting it back is booting into EDL and blankflashing the device... problem is, I can't find a way to do so. Does anybody here know how to enter EDL mode with this phone? I've tried several button combinations, EDL cable, but nothing works. The only thing I've left to try is shortening the mobo pins, but I don't know which ones, let alone if the board even has them.
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I have a super easy solution. Go to the Google app store. And download the premium bugjaeger app on a different Android device so basically you're using another Android device to run fastboot commands just remember with Android 11 make sure you give both devices debugging access
lucasdb94 said:
Hi, I'm having a brick issue with my moto g100, OEM is locked so I can't flash/boot anything. My only hope of getting it back is booting into EDL and blankflashing the device... problem is, I can't find a way to do so. Does anybody here know how to enter EDL mode with this phone? I've tried several button combinations, EDL cable, but nothing works. The only thing I've left to try is shortening the mobo pins, but I don't know which ones, let alone if the board even has them.
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
If you can access fastboot.. try "fastboot reboot emergency"
I know this is prob too late for a suggestion, however have you tried chimera tool to bypass the edl lock? You don't have to pay for that part of the tool
Shortstuff81 said:
I know this is prob too late for a suggestion, however have you tried chimera tool to bypass the edl lock? You don't have to pay for that part of the tool
Click to expand...
Click to collapse
Thanks for suggestion.. It is not too late. Have not tried that tool, so i will do a test when i have the chance to do that. Phone is still bricked.
What Name said:
Thanks for suggestion.. It is not too late. Have not tried that tool, so i will do a test when i have the chance to do that. Phone is still bricked.
Click to expand...
Click to collapse
I'm still trying to unbrick mine as well lol so I'll keep you posted and please try to keep me posted as well.... I haven't tried my own suggestion as of yet due to my PC dying on me.... I'll have a loaner so I'll be trying it then
Shortstuff81 said:
I'm still trying to unbrick mine as well lol so I'll keep you posted and please try to keep me posted as well.... I haven't tried my own suggestion as of yet due to my PC dying on me.... I'll have a loaner so I'll be trying it then
Click to expand...
Click to collapse
Did you get phone unbricked ?
If not, use method in this tread. It saved mine..
Phone wouldn't boot into the system after bootloader locking back...
I wanted to help someone whose phone wouldn't boot into the system after bootloader locking back, phone hangs on a red warning. And in the process of experimenting myself got confused and got into the same situation. Unlocking the bootloader...
forum.xda-developers.com