Related
Q&A for [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [OFFICIAL] Flyme Nexus5 | KK 4.4 | Flyme 3.8.2R | ROM [2014-10-2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
bootloop problem after flash the kernel
Thanks for sharing this amazing Rom
I have a problem, after I flashed ElementalX-N5 1.08.zip the device go into bootloop,
I solve it by re-flash the Rom file, but what is the problem, why my device didn't accept the ElementalX Kernel ?!
and what is the default kernel of this Flyme Rom, is It better than ElementalX Kernel in the Battery Saving ?!
I need to install kernel ElementalX to support The HDR google Camera Feature, bacause the Flyme Rom has a bad camera !
any Support please ?
Curiosity
This is the only android based rom that works on my hardware bricked Nexus 5 (moisture maybe); Sailfish, B2G and Ubuntu Touch works too, but the stock rom and other android based roms screen locks as soon configuration starts (usually touching in "next" after selecting language). I sense that porting the FLymeOS's app settings/configuration could reach any other rom run or something... Any ideas?
Thanks in advance, and sorry for my poor english
M_Nexus5 said:
Thanks for sharing this amazing Rom
I have a problem, after I flashed ElementalX-N5 1.08.zip the device go into bootloop,
I solve it by re-flash the Rom file, but what is the problem, why my device didn't accept the ElementalX Kernel ?!
and what is the default kernel of this Flyme Rom, is It better than ElementalX Kernel in the Battery Saving ?!
I need to install kernel ElementalX to support The HDR google Camera Feature, bacause the Flyme Rom has a bad camera !
any Support please ?
Click to expand...
Click to collapse
You should use ElementalX CM version
Vpabc said:
You should use ElementalX CM version
Click to expand...
Click to collapse
Yes that is what I used, I download it from the this thread so shoud is for CM
And also I tried with the new version 1.12, I download it from ElementalX page, the link was under the CM section ! But same problem, my device go into bootloop !
I have other question please, I changed the dpi of play store to 480 by using the Xposed module, but still I can't get some of Apps when I use the search box of play store !
Shoud change the whole dpi of system & applications or need to change another google app to solve this problem ?!
Thaaanks for helping
This is the bug and meizu say flyme4.0 for nexus 5 will solve this problem
Vpabc said:
This is the bug and meizu say flyme4.0 for nexus 5 will solve this problem
Click to expand...
Click to collapse
thanks, we are waiting for the next version
is there update in the soon
or developers left him ...
Flyme OS not working on my Nexus 5
I flashed the 3.8.2R Flyme OS zip but when it boots, on the language selection screen, it gives me the error "The process com.android.system" has stopped working every time i press NEXT after selecting a language. Restarting didn't help, Clearing Cache/Dalvik didn't help either.
I tried this on the Stock kernel in case that helps someone in helping me!
sp268_simple said:
I flashed the 3.8.2R Flyme OS zip but when it boots, on the language selection screen, it gives me the error "The process com.android.system" has stopped working every time i press NEXT after selecting a language. Restarting didn't help, Clearing Cache/Dalvik didn't help either.
I tried this on the Stock kernel in case that helps someone in helping me!
Click to expand...
Click to collapse
try to do wipe, install flyme, restarts, set the language, then all that flash the gapps
ferozzzz said:
try to do wipe, install flyme, restarts, set the language, then all that flash the gapps
Click to expand...
Click to collapse
Still doesn't work. Once i flash gapps, no matter when i flash them, the phone won't go past the Language selection screen...
sp268_simple said:
Still doesn't work. Once i flash gapps, no matter when i flash them, the phone won't go past the Language selection screen...
Click to expand...
Click to collapse
If you choose the language before flashing gapps no longer asks you choose it again (the language selection screen does not appear)
ferozzzz said:
If you choose the language before flashing gapps no longer asks you choose it again (the language selection screen does not appear)
Click to expand...
Click to collapse
Well that's weird.. Coz i swear it asks me to select the language once again after i flash the gapps.. And that's after already using the phone without gapps and setting everything up beforehand..
When update to flyme4
Problems with immersive mode on fullscreen games
Hi. I flashed Flyme OS a couple of days ago, and I have to say I am loving every single moment of this. Love the interface, love the speed and even the battery life is pretty impressive compared some other ROMS!
Although, I have been experiencing an extremely annoying bug with fullscreen games. I play COC on my phone on a daily basis and when I open the game, the onscreen buttons (Back, Home and Recent) buttons don't disappear like they are supposed to on android 4.4. They stay fixed and visible.
Now, I normally wouldn't mind this, if the full game interface is visible. The problem is that the onscreen buttons are fixed on top of the game, which means that part of the screen is hidden behind the buttons. It is really difficult. I tried a couple of stuff I found on google to fix it.
The only thing I found closest to a fix is to disable the whole onscreen buttons thingy by setting the value of "mu.hw.mainkeys" to "1" in "build.prop" file. Then I installed the "PIE CONTROL" app by "coolace" from the Playstore. It have been working really well for now. But, since it includes installing an external app, which takes up more memory to run I was hoping you guys could look into this and suggest a way to fix this. I like to keep my device clean without installing too much extra applications!
Other than this little problem, I find this as a very top notch ROM. Good work to the developers. Keep it coming
Hope to hear from you guys, and I look forward to newer versions of this ROM, especially one ported with the latest Lollipop release!
Thank You.
---------- Post added at 03:14 PM ---------- Previous post was at 03:06 PM ----------
sp268_simple said:
Well that's weird.. Coz i swear it asks me to select the language once again after i flash the gapps.. And that's after already using the phone without gapps and setting everything up beforehand..
Click to expand...
Click to collapse
I had this problem at the beginning too. But, I downloaded the latest PA Gapps pack and installed it. Worked like a charm after that!
Here is the download link:
http://d-h.st/qOq
This is the PICO package, which means that it will only install the most basic gapps like playstore and play services that you absolutely need to run the system properly! You will have to download the other apps like Gmail and Hangouts from paystore.
Has anyone here succesfully install flyme on lollipop especially with multirom? I always get bootloader error.
I'm using modified TWRP instqlled by multirom. Thanks
Mod brought me here @Adizzzle
JalmiNyondong1933 said:
Has anyone here succesfully install flyme on lollipop especially with multirom? I always get bootloader error.
I'm using modified TWRP instqlled by multirom. Thanks
Mod brought me here @Adizzzle
Click to expand...
Click to collapse
Yes. I installed after lollipop update. Got that error in the first try too!
When flashing the lollipop update, you flashed the hhz12d bootloader. All you have to do is flash the hhz11k bootloader using fastboot. Worked for me after that.
Here is the link where I downloaded hhz11k bootloader:
http://downloadandroidrom.com/file/Nexus5/bootloader/bootloader-hammerhead-hhz11k.zip
:good:
he means cm11. Its work, really, writen now, from flyme, with stock 5.0 and multirom
[EDIT: MY PREVIOUS QUESTION WAS ALREADY ANSWERED] [IGNORE THE ATTACHED IMAGE]
hi my friends! I have 2 questions:
1. I can't make the app "operadora ddd" work with this rom for some reason.
2. Fullscreen mode is definitely broken
Is it normal?
very good
today I used it very good..
Hi folks,
some hardware crash later I found some time again to compile a plain version of LineageOS 14.1 for the Xperia X Compact (kugo). Android version of this build is 7.1.2 with patches and kernel from January 2018. No other software integrated, so you have to install Viper4Android etc. yourself for now to make the AudioFX work. Other issues still remain:
- Selfiecam still upside down (Android API issue?) Fix it using i.e. Simple Cam or similar
- FM Radio doesn't seem to work reliably (binary blob issue?)
I did an update installation with this one on a self-built LOS 14.1 from December so please feel free to do a full install :good:
Download links to the ROM and the corresponding md5sum file for validation when installing with TWRP (I will add some links to AndroidFileHost later):
http://www.filefactory.com/file/51blu0o4lrjx/lineage-14.1-20180117_140543-UNOFFICIAL-SonyLOS-kugo.zip
http://www.filefactory.com/file/5ehop1l7mvuj/lineage-14.1-20180117_140543-UNOFFICIAL-SonyLOS-kugo.zip.md5sum
Edit: Androidfilehost links:
ROM: https://www.androidfilehost.com/?fid=890129502657578159
MD5File: https://www.androidfilehost.com/?fid=962187416754455692
Best regards,
jtk_de
This is great !! Although this rom/thread will probably not get the attention it deserves because you posted it in the Questions & Answers category instead of Roms & Kernels etc.. If you can't move it, maybe you can contact a moderator to get this thread moved to the correct category.
great job, just installed it on my wifes XC and it works like a charm, thanks a zillion !
harryharryharry said:
This is great !! Although this rom/thread will probably not get the attention it deserves because you posted it in the Questions & Answers category instead of Roms & Kernels etc.. If you can't move it, maybe you can contact a moderator to get this thread moved to the correct category.
Click to expand...
Click to collapse
Yeah, that's right. Still not enough merits to post in the ROM section. Hopefully this gonna change soon
ive got problems with this rom ;(
theres an echo when making calls, its very annoying and makes longer conversation impossible. Apart from that its losing net from time to time
switcher said:
ive got problems with this rom ;(
theres an echo when making calls, its very annoying and makes longer conversation impossible. Apart from that its losing net from time to time
Click to expand...
Click to collapse
Can't confirm these issues with my XC and service provider, everything seems to sound normal to me. Still annoying is that changing the volume during calls doesn't seem to work though
jtk_de said:
Can't confirm these issues with my XC and service provider, everything seems to sound normal to me. Still annoying is that changing the volume during calls doesn't seem to work though
Click to expand...
Click to collapse
Hoping official build soon!
How to flash? When flash - bootloop with twrp, stay at lineage logo. What is md5 file for?
From the Moderator Oka1
To all,
I moved this thread to Roms and Kernels where it should be long
I hope all will appreciate the work that was done to make this Rom possible.
To the OP ... Please remember to post your source code in the Git or other approved repository
Thanks ! ~~~ Oka1
Thank you.
echo124 said:
How to flash? When flash - bootloop with twrp, stay at lineage logo. What is md5 file for?
Click to expand...
Click to collapse
Flash with TWRP. The md5sum can be used for verification within TWRP if you check the corresponding box. Clear at least cache, dalvik before install though.
echo124 said:
How to flash? When flash - bootloop with twrp, stay at lineage logo. What is md5 file for?
Click to expand...
Click to collapse
Install with TWRP. Md5sum file is for verification inside TWRP if you check the respective box. Please clear cache, dalvik at least before install.
[ROM] Xperia X Compact Unoff için LineageOS 14.1 (Android 7.1.2, Patchlvl Jan 2018)
screenshot Please
jtk_de said:
Thank you.
Click to expand...
Click to collapse
How long should one wait at Lineage logo splash screen? Not 15 minutes? Gets stuck at the logo, wiped everything, went back to stock then flashed twrp, wipe everything the flash lineage - stuck at logo
jtk_de said:
Install with TWRP. Md5sum file is for verification inside TWRP if you check the respective box. Please clear cache, dalvik at least before install.
Click to expand...
Click to collapse
Doesnt work
Updater process ended with error 7
*nevermind it kicked in after several reboots.
People calling me report a strong echo, i.e. they hear their own voice played back at them. On my end, everything sounds fine, no echo. But it's kind of embarassing to put my callers through this. Won't be able to keep this ROM like this.
Hi bro, thanks for your work! And could you share the code on the github?
Because I tried to build lineage 15.1 on my kugo using the code shared by sony AOSP team, but I failed a lot of times.
I hope to see your code and maybe I can learn some something from it.
Thank you very much.
ROM] LineageOS 14.1 for Xperia X Compact Unoff.(Android 7.1.2, Patchlvl Jan 2018)
ROM] LineageOS 14.1 for Xperia X Compact Unoff.(Android 7.1.2, Patchlvl Jan 2018)
installation instruction!
1=
2=
3=
4=
Thenkyou.
( Xperia X Compact oreo )
= Twrp-3.2.1 =
@jtk_de
Where can I find source code?
Hey,
over the last few weeks I've used my Christmas vacation to start working on the Z18 again. However since work is coming up again soon, I won't have that much time (and nerves) for working on this properly until the end of summer probably.
That's why I want to share my codebase with you, so maybe someone can pick up where I left off (and really, it's nothing big I did. I merely set up the device tree and made it compile more or less. It doesn't boot because of avb and I'm not aware of any way around that)
The device tree can be found here. It's still using a prebuilt kernel but I'll work on fixing the kernel source to a compileable state next.
If anyone wants to get involved, help or pick this up, feel free to do so. The community and I are always happy for help.
Explanations of what the next steps would be can be found below.
Again, do not install this unless you want to softbrick! It's not useable at all and will currently fail at boot verification!!
So what's next?
Fixing avb2.0: This isn't an easy task. How I understand, it either needs the official keys or I failed at signing the build with test keys from LineageOS. Either way this is the first step and top priority so the device boots again at least
EDIT: It seems that https://github.com/rockchip-linux/tools/tree/master/linux/Linux_SecurityAVB might be of some use (given that youyim123, the guy who also did the TWRP for Z18 starred this project). However I don't speak Chinese and putting my device in the hands of Google Translate is risky.. so anyone willing to translate, I'm open for DMs or anything
EDIT2: avb is working, so we can move on to breaking our system now (yay)
Hi, Its a long time i am waiting for a suitable rom to be installed in my Nubia Z18. Can you tell me when this rom can get out? Your effort is highly appreciated.
Zahidul Hasan said:
Hi, Its a long time i am waiting for a suitable rom to be installed in my Nubia Z18. Can you tell me when this rom can get out? Your effort is highly appreciated.
Click to expand...
Click to collapse
Sorry but I can't give you any ETA on this. I'm working on it in my little free time and I'm not even sure what I'm really doing with this. The source is all on the GitHub repo I linked in the OP though, so if you're hesitant and want to get a working ROM, just get involved. It's really not that hard, all it requires is time, patience and lots of googling for weird error messages and further features you want to implement.
You can mostly follow the guide here https://wiki.lineageos.org/devices/bacon/build just replace the bacon command with nx606j-eng and you're good to go and build this yourself. Maybe you can figure out avb since I can't do it by myself, so any help is appreciated.
Dear Sir, Thank you so much for your reply. Last day i tried to push a TWRP from here TWRP installed, but failed to install any gaapps. although process said success.
curtisy said:
Sorry but I can't give you any ETA on this. I'm working on it in my little free time and I'm not even sure what I'm really doing with this. The source is all on the GitHub repo I linked in the OP though, so if you're hesitant and want to get a working ROM, just get involved. It's really not that hard, all it requires is time, patience and lots of googling for weird error messages and further features you want to implement.
You can mostly follow the guide here https://wiki.lineageos.org/devices/bacon/build just replace the bacon command with nx606j-eng and you're good to go and build this yourself. Maybe you can figure out avb since I can't do it by myself, so any help is appreciated.
Click to expand...
Click to collapse
Zahidul Hasan said:
Dear Sir, Thank you so much for your reply. Last day i tried to push a TWRP from here TWRP installed, but failed to install any gaapps. although process said success.
Click to expand...
Click to collapse
Yeah, that thread, if most of the development threads on the Z18 so far, was made by me. I also mentioned in post #3 that flashing Gapps doesn't seem to be working and I was trying to ask the GApps team for help. I never got an answer though, so I stopped looking into this and instead focused my effort on providing a working Lineage build for everyone. The result of that is this thread here
Hey curtisy, are u building lineage OS forZ18 right now?
im chinese and can help to test this rom if need tester, I've a Z18 on hand rite now and still finding a solution to solve the "GAPP" problem
try to flash GAPP package but no luck!
hope the Lineage can release soon for testing~tks!
sky104hk said:
Hey curtisy, are u building lineage OS forZ18 right now?
im chinese and can help to test this rom if need tester, I've a Z18 on hand rite now and still finding a solution to solve the "GAPP" problem
try to flash GAPP package but no luck!
hope the Lineage can release soon for testing~tks!
Click to expand...
Click to collapse
I'm not building it right now. As I said, the project is pretty much on standby for anyone to take it where I left it but I'm still working on it sometimes and try to get it to work. The big issue is that the Z18 uses avb2 which I'm not sure how to bypass and which is also why the Lineage I built will not boot correctly. I don't want to seem rude saying this over and over again, but rather than testing, it would help if I had some more people to get involved. Just download the source and follow the instructions I mentioned in post#4. Progress will be much faster if there was a team behind this and not only one guy who doesn't know what he's doing most of the time. Also getting support in the Lineage IRC is tedious because I can't be online 24/7, so having some more people nag about avb2 there would also be of huge help.
And when there finally is something to test, not only will you be satisfied by your own achievement, but you can also be the initial tester since you built the ROM yourself.
PS: The Gapps issue is probably because of avb2 as well, however I'm not too sure about that
curtisy said:
I'm not building it right now. As I said, the project is pretty much on standby for anyone to take it where I left it but I'm still working on it sometimes and try to get it to work. The big issue is that the Z18 uses avb2 which I'm not sure how to bypass and which is also why the Lineage I built will not boot correctly. I don't want to seem rude saying this over and over again, but rather than testing, it would help if I had some more people to get involved. Just download the source and follow the instructions I mentioned in post#4. Progress will be much faster if there was a team behind this and not only one guy who doesn't know what he's doing most of the time. Also getting support in the Lineage IRC is tedious because I can't be online 24/7, so having some more people nag about avb2 there would also be of huge help.
And when there finally is something to test, not only will you be satisfied by your own achievement, but you can also be the initial tester since you built the ROM yourself.
PS: The Gapps issue is probably because of avb2 as well, however I'm not too sure about that
Click to expand...
Click to collapse
OK I understand your situation, probably not as many ppl own this phone at all...there are many ppl doing developement in Oneplus 6 which I actually own that phone, the Z18 is actually my fd, therefore I cannot keep the phone long...just wonder if there have more ppl involve to this...the "avb2" I'll check to see if anyone on the net doing this, haha! the only solution is more developer involve to this phone!
sky104hk said:
OK I understand your situation, probably not as many ppl own this phone at all...there are many ppl doing developement in Oneplus 6 which I actually own that phone, the Z18 is actually my fd, therefore I cannot keep the phone long...just wonder if there have more ppl involve to this...the "avb2" I'll check to see if anyone on the net doing this, haha! the only solution is more developer involve to this phone!
Click to expand...
Click to collapse
As a quick update for everyone here as well because the discussion has somewhat shifted to the TWRP thread I worked around avb now. I also have a system.img but it's not working as of yet. If you want to get stuck in a boot loop, feel free to ask here and I'll attach the files in the OP for you to try and modify. Without building from source, there's probably not that much you can do though.
Hint: try booting phh-treble GSI first.
j1505243 said:
Hint: try booting phh-treble GSI first.
Click to expand...
Click to collapse
Thanks! Going to try that later but out of curiosity, isn't the reason this phone doesn't have google services out of the box that it wasn't certified by google? If so it's not treble compatible either right? Or am I missing something?
curtisy said:
Thanks! Going to try that later but out of curiosity, isn't the reason this phone doesn't have google services out of the box that it wasn't certified by google? If so it's not treble compatible either right? Or am I missing something?
Click to expand...
Click to collapse
An uncertified device can be freely Treble compatible, so it's really worth to try. Remember to join the Telegram chat of phh-treble if you happen to need some quicker response.
j1505243 said:
An uncertified device can be freely Treble compatible, so it's really worth to try. Remember to join the Telegram chat of phh-treble if you happen to need some quicker response.
Click to expand...
Click to collapse
Awesome. Thank you for the heads up! Might be worth to invest some time in this again then.
j1505243 said:
Hint: try booting phh-treble GSI first.
Click to expand...
Click to collapse
Alright, I tried and I don't think it's working. I get stuck in a bootloop again which repeats every few seconds.
Since I got Lineage compiled, wouldn't it be a better idea to just get that working and be done with it?
Any help is much appreciated!
Hello curtisy, I wish you good luck with your work on the Nubia Z18. I'd love to help you, but unfortunately I have no skills at android developing. Anyway... in case you will get LineageOS to run, I'd be very happy to post an instruction for the installation on my website chinahandys.net. Liebe Grüße, Joscha
curtisy said:
Alright, I tried and I don't think it's working. I get stuck in a bootloop again which repeats every few seconds.
Since I got Lineage compiled, wouldn't it be a better idea to just get that working and be done with it?
Any help is much appreciated!
Click to expand...
Click to collapse
Booting non-GSI will only be tougher :/ Capture deep level logs and inspect that. If you need help, join a phh-treble chat somewhere.
j1505243 said:
Booting non-GSI will only be tougher :/ Capture deep level logs and inspect that. If you need help, join a phh-treble chat somewhere.
Click to expand...
Click to collapse
Yeah that's actually the same point I stopped at with Lineage. Got it to boot to the Nubia logo, captured logs and I can see some weird errors. But getting replies on IRC is a pain, especially if I can only be online for 2hrs a day. That's why I had hoped someone would pick this up but to no avail. Guess I'll have to look into it again and experiment.
Thanks for your help so far! If there's any more tips you want to share, I'm always open for them
furiousjay said:
Hello curtisy, I wish you good luck with your work on the Nubia Z18. I'd love to help you, but unfortunately I have no skills at android developing. Anyway... in case you will get LineageOS to run, I'd be very happy to post an instruction for the installation on my website chinahandys.net. Liebe Grüße, Joscha
Click to expand...
Click to collapse
Hey, sure thing I actually know the site well and got the idea of getting a Z18 from your site. In case you know anyone that might be able to help with logs or anything, I'm always open for suggestions and help.
As a general rule of thumb, so far the process isn't exactly easy because it requires proprietary software. The issue is with boot verification, so to get around that, I rooted my phone with some Chinese Windows application (still trying to reverse that to get the actual keys..) then I could start flashing. The process is tedious though as every failure means reflashing the original rom as well as running the root tool again. I'll try to make it simpler and cross platform once the rom actually works. But it's still a long way to that point.
curtisy said:
Hey, sure thing I actually know the site well and got the idea of getting a Z18 from your site. In case you know anyone that might be able to help with logs or anything, I'm always open for suggestions and help.
As a general rule of thumb, so far the process isn't exactly easy because it requires proprietary software. The issue is with boot verification, so to get around that, I rooted my phone with some Chinese Windows application (still trying to reverse that to get the actual keys..) then I could start flashing. The process is tedious though as every failure means reflashing the original rom as well as running the root tool again. I'll try to make it simpler and cross platform once the rom actually works. But it's still a long way to that point.
Click to expand...
Click to collapse
Unfortunately I personally don't know somebody who has the skills to support you. I have included a call for support for your project in our review.
---REBORN---
This is complete guide tour to your s7 edge g9350 only UNLOCK,TWRP,CUSTOM ROM,ROOT.
************************************************************************************************
************************************************************************************************
_Build on latest official Oreo G9350ZCU3CRJ2
_You can easily choose root method Magisk or SU,
_Plus Xposed Great performance. i have found Very stable rom so far.
Support devices: Qualcomm snapdragon S7/S7E G9300/G9350 ONLY.
On your mark GO...
Chapter 1 UNLOCK
1. DOWNLOAD+INSTALL "CROM.APK" IT WILL ALLOW BOOTLOADER TO BE UNLOCKED.
2.GOTO SETTINGS ENABLE DEVELOPER OPTIONS, AND TOGGLE OEM UNLOCK TO ON. ALSO BE SURE YOU HAVE THE SAMSUNG USB DRIVERS ON YOUR PC:
Chapter 2 TWRP Installation
1. Download the latest TWRP Recovery file direct from TWRP's website for your model Flash with odin.
Note: make sure you flash TWRP after Clear CHAPTER 1, otherwise you will brick your devcie. & Dont worry no root required just stick to guide step by step.
Chapter 3 Flash
1. Flash with latest BL,CP with latest Odin 3.13.1 (Odin -->Options Tab --> Untick Auto-reboot).
exit download mode or restart manually.
Chapter 4 ROM Installation
1. Press Home + Power + Volume UP keys, to go to TWRP (make sure you have latest TWRP installed on your devices)
2.Full wipe (Davik + Cache + Data)
3.Go for Install ROM.
Chapter 5 Fingerprint Scanner Fix
1.Flash with fix tradav10 - settings.zip
All Done!
......................
DOWNLOAD SECTION
CROM APK
https://drive.google.com/file/d/15YE2eC2VImQ01kxBYrjdkxccRAknfUuC/view?usp=sharing
or
https://www.apkmirror.com/apk/samsu...-service-1-0-8-android-apk-download/download/
BL,CP LINK
https://androidfilehost.com/?fid=5862345805528048441
TWRP LINK
https://twrp.me/samsung/samsunggalaxys7edgechina.html
ROM LINK
V10
https://androidfilehost.com/?fid=11410963190603906734
V12 Final
https://androidfilehost.com/?fid=1395089523397948574
FIX LINK
https://androidfilehost.com/?fid=11410963190603908569
****************************************************************************************************
****************************************************************************************************
Note: If you select Magisk as root method, you must manually restart your phone after first booting in order to get full root
NOTE: DO NOT update Weather app
_ This is Hilary Trump's Rom, I am just his fan who reborn this post.
----------------------------
Many thanks to: 鑒機大師 JJDS - original rom author from China.
Rebuild by hilary trump
Galaxy team from Vietnam for lag-fix
@xmanz for English translation
Thank you very much. Great work, i really like this rom. One question regarding latest BL/CP - in link it is ZCU2CRF5 version, but it is not the latest version. As far as i know latest versions are ZHS3CRJ2 which i used before installing trada rom. Or do you give a link to binary 2 version, so that people are not locked on binary 3, after which you can not get back....Correct me if i am wrong.
kapellan133 said:
Thank you very much. Great work, i really like this rom. One question regarding latest BL/CP - in link it is ZCU2CRF5 version, but it is not the latest version. As far as i know latest versions are ZHS3CRJ2 which i used before installing trada rom. Or do you give a link to binary 2 version, so that people are not locked on binary 3, after which you can not get back....Correct me if i am wrong.
Click to expand...
Click to collapse
hi 1st thing 1st this is not my rom all credit goes to hilary trump. the reason i post this rom because original post is down by the admin. I just mix hilary's some posts into 1 box & post it because i have found this rom very stable so far. I am using it right now & really enjoying. Now come to your question i dont know what happen if you brush with older version of BL,CP on the latest BL,CP it might be brick. but i was using the older version of BL,CP it was good for me. however i mention this is not my work & not my post so i am not the responsible for any damage to your device even the original owner. well if you want to take a chance give it try & let me know if i can help.
Thanks...
https://androidfilehost.com/?fid=1395089523397948574
Latest version 12 by hilary trump.
Thanks a lot hilary trump for this new and amazing update.
Stay bless
Ramiz1 said:
https://androidfilehost.com/?fid=1395089523397948574
Latest version 12 by hilary trump.
Thanks a lot hilary trump for this new and amazing update.
Stay bless
Click to expand...
Click to collapse
What's the changelog for this. Is this pie based?
ghostangel200 said:
What's the changelog for this. Is this pie based?
Click to expand...
Click to collapse
Why did you decide to root your device?
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
PoochyX said:
Why did you decide to root your device?
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Click to expand...
Click to collapse
This doesn't answer my question though..
ghostangel200 said:
What's the changelog for this. Is this pie based?
Click to expand...
Click to collapse
Don't know about changelog but there are some obvious changes in this rom like clock and gallery app are of one ui style etc
i have installed this and my experience is nice. really a taste of pie. i hope Hilary Trump would work on the Pie Os.
Hi did you test 12 version
Ramiz1 said:
https://androidfilehost.com/?fid=1395089523397948574
Latest version 12 by hilary trump.
Thanks a lot hilary trump for this new and amazing update.
Stay bless
Click to expand...
Click to collapse
Hi did you test 12 version, is there any bug in this version of trada can you please update or make a proper post so that users can test & enjoy such a stable rom.
thanks
reports bugs if any
ghostangel200 said:
i have installed this and my experience is nice. really a taste of pie. i hope Hilary Trump would work on the Pie Os.
Click to expand...
Click to collapse
hi reports bugs if you found any & can please share some of your rom screenshots.
thanks
the few bugs I have notice is:
Direction lock not working
Bixby voice not working, so no voice services
Ramiz1 said:
https://androidfilehost.com/?fid=1395089523397948574
Latest version 12 by hilary trump.
Thanks a lot hilary trump for this new and amazing update.
Stay bless
Click to expand...
Click to collapse
In private messages hilary trump wrote me - """P/S: In aroma installer "Do you want to delete the data". Please choose " Delete personal data". If not, the rom flashing installer will be failed. You need to back up your personal data before that"" .
Did you choose - delete personal data in Aroma? Was you internal storage wiped after that?
Also can you tell what bootloader, modem, android version it is based.
Thank you)
ghostangel200 said:
i have installed this and my experience is nice. really a taste of pie. i hope Hilary Trump would work on the Pie Os.
Click to expand...
Click to collapse
hello can you please tell me is finger print scanner working on this rom?
antash.ahmed said:
Hi did you test 12 version, is there any bug in this version of trada can you please update or make a proper post so that users can test & enjoy such a stable rom.
thanks
Click to expand...
Click to collapse
Rom is stable. I haven't find any bug yet and you can flash on v 10 without wiping data
Select option delete system setting and keep data.
Ramiz1 said:
Rom is stable. I haven't find any bug yet and you can flash on v 10 without wiping data
Select option delete system setting and keep data.
Click to expand...
Click to collapse
Thanks ramiz for your help. I have downloaded the 12 rom i will give it a try & update soon. Because i am busy in work & this is only phone i have so dont want to messing with my devices well need to backup my old rom & data :laugh: & thank alot. Also i will test this rom & update my post for this update.:good:
antash.ahmed said:
hello can you please tell me is finger print scanner working on this rom?
Click to expand...
Click to collapse
yes it's working fine
Thanks alot
ghostangel200 said:
yes it's working fine
Click to expand...
Click to collapse
Thanks alot i will install the room soon & will update about it.
antash.ahmed said:
Thanks alot i will install the room soon & will update about it.
Click to expand...
Click to collapse
Good let us know as soon as you do
[emoji3436]I Willl Scarfice For Those That I Love [emoji3434]
Thanks for screenshots
ghostangel200 said:
the few bugs I have notice is:
Direction lock not working
Bixby voice not working, so no voice services
Click to expand...
Click to collapse
Hi these bug you are talking about is no issue as far as you are not facing device heats up, random shutdowns, & battery draining quickly. Well thanks for your help
Hey Guys,
Hope someone can help me, I am currently installing CRDroid on my G7 Power and have all the files except for gapps. I just want to check that it the Arm64 version and not just Arm that i should install.
Having a bit of a senior moment and totally cannot remember.
sudd1976 said:
Hey Guys,
Hope someone can help me, I am currently installing CRDroid on my G7 Power and have all the files except for gapps. I just want to check that it the Arm64 version and not just Arm that i should install.
Having a bit of a senior moment and totally cannot remember.
Click to expand...
Click to collapse
Arm 64
@sudd1976 Check these out. I've been using them a while now and they're great and unique in some ways compared to others gapps .. https://nikgapps.com/
(Edit added)
See the FAQ section of his site for details about what makes them different and how they work. I love them. ?