I've seen a few people mention engineering mode and that it has calibration settings for the proximity sensor, which I've been having issues with. I read that the code is *#808#, but after I type that in the dialer, the text disappears and nothing happens. I found about 3 or 4 other codes around online, but none of them worked. Any ideas? I'm on 9.5.11. I'm rooted and using the ElementalX kernel.
amirage said:
Nope, not working
Click to expand...
Click to collapse
:crying:Not working 1+ 7t OS 10.3.4...
Any other solution?
mkzpxy said:
:crying:Not working 1+ 7t OS 10.3.4...
Any other solution?
Click to expand...
Click to collapse
If you have root enabled, you can try installing this module created by @jamal2367.
dianoandr said:
If you have root enabled, you can try installing this module created by @jamal2367.
Click to expand...
Click to collapse
What do this module?
Mervingio said:
What do this module?
Click to expand...
Click to collapse
Overwrites the file "sys_secrecy_switch_list.xml" with an old release, if I understood correctly, this xml has been modified by OnePlus to block access to engineering mode. I knew this solution because it was used on OnePlus 8 in the ExOS 10 rom and, if I remember correctly, in the xXx rom.
dianoandr said:
Overwrites the file "sys_secrecy_switch_list.xml" with an old release, if I understood correctly, this xml has been modified by OnePlus to block access to engineering mode. I knew this solution because it was used on OnePlus 8 in the ExOS 10 rom and, if I remember correctly, in the xXx rom.
Click to expand...
Click to collapse
Nice but need stock dialer right? I'm using Google Phone now
Mervingio said:
Nice but need stock dialer right? I'm using Google Phone now
Click to expand...
Click to collapse
Honestly I don't know if it works with alternative dialers too, I tried it with the stock dialer.
Oneplus 7t
hallo dare said:
Thanks. Yeah that's wherr i was downloading from, but still the same result. I'm on eu version, what version are you on?
Click to expand...
Click to collapse
It's not working for me.
If you are having that many issues with the sensor, maybe get it replaced?
equlizer said:
If you are having that many issues with the sensor, maybe get it replaced?
Click to expand...
Click to collapse
The proximity sensor isn't that bad. Sometimes the screen will come on for a few seconds while on a call. I figured I'd try to calibrate it. The bigger problem to me is not being able to get in to engineering mode. Does that code open up engineering mode for you?
mapolidori said:
The proximity sensor isn't that bad. Sometimes the screen will come on for a few seconds while on a call. I figured I'd try to calibrate it. The bigger problem to me is not being able to get in to engineering mode. Does that code open up engineering mode for you?
Click to expand...
Click to collapse
It works on 9.5.9 for sure.... but for some reason it doesn't work on 9.5.11 either a bug or they took away users ability to get into engineering mode....
Did you figure it out? How to enter the engineering menu?
I can't acces service menu either. Running 9.5.11
I wanted to calibrate the rotation sensor because out of 10 times auto rotation only works 3 times for me. Super annoying, especially on a device like this..
My sensor is faulty together with accelerometer and the proximity sensor. I tried everything. I'm sending my 7pro to warranty tomorrow.
mapolidori said:
I've seen a few people mention engineering mode and that it has calibration settings for the proximity sensor, which I've been having issues with. I read that the code is *#808#, but after I type that in the dialer, the text disappears and nothing happens. I found about 3 or 4 other codes around online, but none of them worked. Any ideas? I'm on 9.5.11. I'm rooted and using the ElementalX kernel.
Click to expand...
Click to collapse
*#808# doesn't work anymore. they removed it on 9.5.11
Just download and install the engineering mode app from appmirror then the code will work
https://www.apkmirror.com/apk/onepl...-0-171117173719-25c8842-android-apk-download/
shan_pei said:
Just download and install the engineering mode app from appmirror then the code will work
https://www.apkmirror.com/apk/onepl...-0-171117173719-25c8842-android-apk-download/
Click to expand...
Click to collapse
For pie, not android 10
hallo dare said:
For pie, not android 10
Click to expand...
Click to collapse
I am on Android 10 and it works for me. Sometimes it will fc but generally not a big problem.
shan_pei said:
I am on Android 10 and it works for me. Sometimes it will fc but generally not a big problem.
Click to expand...
Click to collapse
Interesting, it just goes to app info for me when I try it.
hallo dare said:
Interesting, it just goes to app info for me when I try it.
Click to expand...
Click to collapse
Working fine for me on 10.0.1 after installing engineering mode
robertelam83 said:
Working fine for me on 10.0.1 after installing engineering mode
Click to expand...
Click to collapse
Can you send me on the link to where you got it from please cos it just ain't happening for me
robertelam83 said:
Working fine for me on 10.0.1 after installing engineering mode
Click to expand...
Click to collapse
---------- Post added at 06:50 AM ---------- Previous post was at 06:50 AM ----------
[/COLOR]
hallo dare said:
Can you send me on the link to where you got it from please cos it just ain't happening for me
Click to expand...
Click to collapse
I used this one
Just download and install the engineering mode app from appmirror then the code will work
https://www.apkmirror.com/apk/onepl...-0-171117173719-25c8842-android-apk-download/
robertelam83 said:
---------- Post added at 06:50 AM ---------- Previous post was at 06:50 AM ----------
[/COLOR]
I used this one
Just download and install the engineering mode app from appmirror then the code will work
https://www.apkmirror.com/apk/onepl...-0-171117173719-25c8842-android-apk-download/
Click to expand...
Click to collapse
Thanks. Yeah that's wherr i was downloading from, but still the same result. I'm on eu version, what version are you on?
hallo dare said:
Thanks. Yeah that's wherr i was downloading from, but still the same result. I'm on eu version, what version are you on?
Click to expand...
Click to collapse
I'm on the Global version
Nope, not working
Related
I wasn't participate in beta program, so I suppose it start to rolling out globally.
Can you post build number later to compare it to the official beta floating arround?
downloadonlyaccount said:
Can you post build number later to compare it to the official beta floating arround?
Click to expand...
Click to collapse
Already in the attachments
Majaque said:
Already in the attachments
Click to expand...
Click to collapse
Whoops, didn't see that
So, seems to be the same build
Same
Code:
Thanks God, i was really sad when i see im not beta tester. GL&HF my Poland brother.[IMG="Update"]https://i.imgur.com/1FlIXrl.png
[/IMG]
How you flash the update, I have to unlock bootloader to do that?
i'm also updating my system right now - i'm wondering how it will work with magisk - hope it will boot normally - we will see
Phone booted successfully
Root works
Anyone found a way how to get the update with a VPN?
toge64 said:
Anyone found a way how to get the update with a VPN?
Click to expand...
Click to collapse
See this post I made with the update method through a VPN:https://forum.xda-developers.com/mi-a2-lite/how-to/beta-upgrade-to-android-9-beta-pie-vpn-t3872694
Am I the only one who got stock camera app crashed?
ghanipradita said:
Am I the only one who got stock camera app crashed?
Click to expand...
Click to collapse
Some people have that bug but havent seen any solution so far, u already tried with a factory reset? im downloading the update right now so ill report later how is it going
Camera works?
krzygaj said:
i'm also updating my system right now - i'm wondering how it will work with magisk - hope it will boot normally - we will see
Phone booted successfully
Root works
Click to expand...
Click to collapse
Enviado desde mi Mi A2 Lite mediante Tapatalk
Abrilabr said:
Some people have that bug but havent seen any solution so far, u already tried with a factory reset? im downloading the update right now so ill report later how is it going
Click to expand...
Click to collapse
Already solved by disabling dnd
Anyway, is it possible to change the corner radius for natifications panel? It looks prety odd now
Camera on my device works just fine after a factory reset.
My only problem now is how to remove the cellular signal since i only like to have just both wifi signal and battery only.
i tried hiding the cellular signal using the UI tuner but it seens to not work, any ideas?
Cons: the fact that the stock launcher is only the one who gets integrated in the recents is really bad, try using another custom launcher and the recents just get bad.
[email protected] said:
Code:
Thanks God, i was really sad when i see im not beta tester. GL&HF my Poland brother.[IMG="Update"]https://i.imgur.com/1FlIXrl.png
[/IMG]
Click to expand...
Click to collapse
will it work if i use vpn and set to Poland to get the OTA? ?
I'm in Poland and I just got the update. What's interesting is that I now have battery percentage in the statusbar.
Edit: Battery percentage can now be enabled using SystemUI tweaks.
Mr_Bartek said:
Edit: Battery percentage can now be enabled using SystemUI tweaks.
Click to expand...
Click to collapse
Can you write how to do that?
---------- Post added at 08:14 AM ---------- Previous post was at 08:13 AM ----------
Sherman01 said:
Camera works?
Click to expand...
Click to collapse
Yes
Majaque said:
I wasn't participate in beta program, so I suppose it start to rolling out globally.
Click to expand...
Click to collapse
So you telling us, that the update appeared by itself, you did not use VPN to force it??
I am From Pakistan And Subscribed To Beta By Recruitment Process. But Somehow Haven't Selected Yet . And As Well As Process Define Above Does Not Work Too And The Update Haven't Received Yet By Itself.
Can Someone Help/Guide How To Do.
krzygaj said:
Can you write how to do that?
Click to expand...
Click to collapse
Use this to access the menu: https://play.google.com/store/apps/details?id=com.bryancandi.android.uituner
And if it doesn't work then access using these steps: https://www.reddit.com/r/GooglePixel/comments/8p50yo/simple_way_to_get_system_ui_tuner_on_android_p/
Vietnam region
Still disabled. Or we have to wait 7 days like Samsung?
Edit: just wait, it will enable in some minutes
Just wait some minutes.
silveraero said:
Just wait some minutes.
Click to expand...
Click to collapse
Unlocking bootloader option never been an issue on my side....and I'm still on pie 52.0.A.3.84 (waiting for a drm fix to do so and I must say this is the first I used an Xperia un-rooted for that long ?)
Any changes bugfixing?
And thank you for open this thread!
-DM- said:
Unlocking bootloader option never been an issue on my side....and I'm still on pie 52.0.A.3.84 (waiting for a drm fix to do so and I must say this is the first I used an Xperia un-rooted for that long ?)
Click to expand...
Click to collapse
We are all facing the issue with enable OEM Unlock. If you enabled before upgrade to pie, it will keep the setting enabled. For clean flash, it is diabled by default and can't be enabled.
MartinX3 said:
Any changes bugfixing?
And thank you for open this thread!
Click to expand...
Click to collapse
Sony did not show the changes log so I have no idea. But the OEM is fixed as expected.
silveraero said:
We are all facing the issue with enable OEM Unlock. If you enabled before upgrade to pie, it will keep the setting enabled. For clean flash, it is diabled by default and can't be enabled.
Click to expand...
Click to collapse
Well that explains it then ? as I did toggle on then off it at some point while on O....
For those with a working camera on Pie, do not update to .126. The camera preview will break again.
whiteduck89 said:
For those with a working camera on Pie, do not update to .126. The camera preview will break again.
Click to expand...
Click to collapse
Should you write for rooted devices too
whiteduck89 said:
For those with a working camera on Pie, do not update to .126. The camera preview will break again.
Click to expand...
Click to collapse
And what if i dont use drm fix and my camera works + preview also on .58 then i can updated to fw 126 with working camera + preview right ?
whiteduck89 said:
For those with a working camera on Pie, do not update to .126. The camera preview will break again.
Click to expand...
Click to collapse
I take it,you mean only those who have rooted devices shouldnt update?
whiteduck89 said:
For those with a working camera on Pie, do not update to .126. The camera preview will break again.
Click to expand...
Click to collapse
Suddenly, i can confirm that. Camera broken again with -126 fw on my H8266.
---------- Post added at 12:51 PM ---------- Previous post was at 12:49 PM ----------
Trace.Oneil said:
I take it,you mean only those who have rooted devices shouldnt update?
Click to expand...
Click to collapse
Yes. its DRM issue.
As always, pretty good update!
Nice (again) Sony!
Luhccas-X10 said:
As always, pretty good update!
Nice (again) Sony!
Click to expand...
Click to collapse
nothing special. no change. why do you have some many apps restricted?
x10isrooted said:
nothing special. no change. why do you have some many apps restricted?
Click to expand...
Click to collapse
Because in my home I use wifi all the time and this doesn't matter. (restrict apps data in background)
I left only WhatsApp, E-mail, OneFootball, KWGT, Instagram and Tesla Unread "freed".
silveraero said:
Vietnam region
Click to expand...
Click to collapse
any link for the software
google or mega
karrouma said:
any link for the software
google or mega
Click to expand...
Click to collapse
This is OTA update, so no link. You can try with XperiaFirm
camera is fixed by me ^^ look here
https://forum.xda-developers.com/xperia-xz2/themes/pie-camera-fix-android-pie-fw-52-0-3-126-t3878653
Now at 52.0.A.163 for H8266
This app was developed for the OP6T by @Zacharee1, but also works with the OP7Pro:
https://labs.xda-developers.com/store/app/tk.zwander.opfpcontrol
Original Thread:
https://forum.xda-developers.com/oneplus-6t/themes/app-theme-opfpcontrol-custom-t3899522
Doesn't work for me.
Oos 9.5.10
Magisk 19.3
Stock kernel
International 12gb version
yandreev3 said:
Doesn't work for me.
Oos 9.5.10
Magisk 19.3
Stock kernel
International 12gb version
Click to expand...
Click to collapse
It Does work, But you need to reboot your device a bunch of times, and set the battery optimisation for the particular app off.
first time running the app will cause it to FC, this happened 2 times for me, just open the app again and you'll be able to customise it
Koogly said:
It Does work, But you need to reboot your device a bunch of times, and set the battery optimisation for the particular app off.
first time running the app will cause it to FC, this happened 2 times for me, just open the app again and you'll be able to customise it
Click to expand...
Click to collapse
Works fine for me with optimization on. ?
Krsmqn said:
Works fine for me with optimization on. ?
Click to expand...
Click to collapse
Cool, It Does that sometimes too, I got it working that way on Custom ROMs though. Glad to know
Works fine for me as well (T-Mobile converted to International, 9.5.10, obviously rooted, stock kernel & Magisk). I do have battery restriction on. I did have one force close at one point, but otherwise works as intended.
Sent from my OnePlus 7 Pro using XDA Labs
Koogly said:
It Does work, But you need to reboot your device a bunch of times, and set the battery optimisation for the particular app off.
first time running the app will cause it to FC, this happened 2 times for me, just open the app again and you'll be able to customise it
Click to expand...
Click to collapse
you dont need to disable the battery optimisation, because the app only changes system files one time.
Just set the picture, press enter, reboot and open the app once. Now you should see the new image.
It doesn't work for me, after I reboot there is no change. I tired rebooting 4 times now and still nothing
Edit: I spoke to soon lol. It worked finally
Works for me on Havoc os, no problems
sparky2029 said:
It doesn't work for me, after I reboot there is no change. I tired rebooting 4 times now and still nothing
Edit: I spoke to soon lol. It worked finally
Click to expand...
Click to collapse
You just had to do the magic rain dance... Lol
How are u guys using this app. Where are u getting your finger print icons from? Appreciate the help
vineetreshmi said:
How are u guys using this app. Where are u getting your finger print icons from? Appreciate the help
Click to expand...
Click to collapse
Try the original thread.
https://forum.xda-developers.com/oneplus-6t/themes/app-theme-opfpcontrol-custom-t3899522
vineetreshmi said:
How are u guys using this app. Where are u getting your finger print icons from? Appreciate the help
Click to expand...
Click to collapse
The original Thread has some good one, or you could search for any 'Logo" png on google images, it'll work fine.
Krsmqn said:
Try the original thread.
https://forum.xda-developers.com/oneplus-6t/themes/app-theme-opfpcontrol-custom-t3899522
Click to expand...
Click to collapse
Thanks will do
It's working just fine for me. I didn't realize how much I'd miss this from my 6t
vineetreshmi said:
How are u guys using this app. Where are u getting your finger print icons from? Appreciate the help
Click to expand...
Click to collapse
I took my own logo
FYI, working on Android 10 beta. :good:
Krsmqn said:
FYI, working on Android 10 beta. :good:
Click to expand...
Click to collapse
Thanks @Krsmqn!
Working Android 10 beta
Android 10 beta
Heres a few pngs you can use ?
https://www.dropbox.com/sh/s7v5fncwvdpw97s/AAALVxPGSpda54dgdAlJey_Pa?dl=0
It's live, not sure what's different. Anyone having VoLte issues with Verizon? If I toggle it, it works until the radio state switches (reboot, or on and off WiFi). It always shows selected under settings but needs to be cycled to work.
Just updated. The multitask selection issue seems has been fixed.
multitask fixed, but now its telling me nova launcher cant use gestures and it added the 3 navigation keys to the home screen. mind you, i have already been using it half the day with gestures, the it stopped. wack!
i just noticed wifi-calling is not working. thats a BIG problem.
GrapeBandit said:
i just noticed wifi-calling is not working. thats a BIG problem.
Click to expand...
Click to collapse
Mine works sprint
Does anyone have problem adding fingerprint in beta 6? Or any security at all?
leo06 said:
Does anyone have problem adding fingerprint in beta 6? Or any security at all?
Click to expand...
Click to collapse
i can add fingerprint.
my wifi-calling mysteriously works now. seems the only issue is that navigation gestures dont work with 3rd party launchers, so using the crappy stock quickstep launcher
****ing fed up with these buggy ass betas. I can't change and or add security unlock options i.e. pattern / pin etc...
leo06 said:
Does anyone have problem adding fingerprint in beta 6? Or any security at all?
Click to expand...
Click to collapse
I had the same problem when I using fastboot to flash the full rom. I flashed it back to Android Pie and then use OTA through the phone, the fingerprint works fine now.
georgeli said:
I had the same problem when I using fastboot to flash the full rom. I flashed it back to Android Pie and then use OTA through the phone, the fingerprint works fine now.
Click to expand...
Click to collapse
I did the same but instead of pie I flashed beta 4
georgeli said:
I had the same problem when I using fastboot to flash the full rom. I flashed it back to Android Pie and then use OTA through the phone, the fingerprint works fine now.
Click to expand...
Click to collapse
Ditto...had the same issue and resolved by doing what you did...
Can someone please share the DP6 Easter Egg apk??? It's either in system/app/EasterEgg or system/app/EasterEgg_02. Thanks in advance!!!
https://www.androidcentral.com/android-q-easter-egg-shows-beta-6-essential-phone
docnok63 said:
Can someone please share the DP6 Easter Egg apk??? It's either in system/app/EasterEgg or system/app/EasterEgg_02. Thanks in advance!!!
https://www.androidcentral.com/android-q-easter-egg-shows-beta-6-essential-phone
Click to expand...
Click to collapse
thats weird, i only have version 1, and im on beta 6. how are you supposed to use the app anyway?
GrapeBandit said:
thats weird, i only have version 1, and im on beta 6. how are you supposed to use the app anyway?
Click to expand...
Click to collapse
That's fine, PLEASE upload that apk here or anywhere I can download it from.
Navigate to Settings\About Phone\Android version and tap Android version a few times to use it. Please upload and thank you in advance.
EDIT: Or anyone else reading this. PLEASE upload and ty.
Try this.
I tapped on it, it says android 10 and I get to move it around. whats the point?
GrapeBandit said:
Try this.
I tapped on it, it says android 10 and I get to move it around. whats the point?
Click to expand...
Click to collapse
Thanks. There's a frameworks issue preventing it from working properly on the OnePlus 7 Pro
docnok63 said:
Thanks. There's a frameworks issue preventing it from working properly on the OnePlus 7 Pro
Click to expand...
Click to collapse
No problem! You a dev trying fix the issue on the OP7 Pro?
I still dont get the point of what its supposed to do, and why someone would go out of there way for it. lol
GrapeBandit said:
No problem! You a dev trying fix the issue on the OP7 Pro?
I still dont get the point of what its supposed to do, and why someone would go out of there way for it. lol
Click to expand...
Click to collapse
Just like the name implies, it's the Easter Egg when you go into Settings\About phone click Android version and then click Android version a few times fast. There's been one on every version of Android.
In this one, you can move the "Android" the "1" and the "0" around the screen and if you tap one and then tap again fast, you can make it spin. If you spin the "1" around in such a way that it makes the letter Q with the "0", then you get to play a game.
It's a complete novelty.
The newer build on OP7Pro has the new Easter Egg and the first part works, but there is no game.
Got a few PMs on how I manage to install GMS on my mate 30 Pro. Here is a dummy guide for those who want to DIY within 10 min.
https://lmphotography641.wordpress.com/2019/10/27/installing-google-play-store-for-mate-30-pro/
I have updated this guide to work for all Huawei devices starting from mate 30 onwards .. and yes it works on latest P40’s and mate xs
Great to know
wolfgart said:
can' t open
Click to expand...
Click to collapse
Link updated. u can remove your old post
Rithina said:
Link updated. u can remove your old post
Click to expand...
Click to collapse
Thanks Bro.
Do you think this guide will work today for a fresh install ?
Rithina said:
Got a few PMs on how I manage to install GMS on my mate 30 Pro. Here is a dummy guide for those who want to DIY within 10 min.
https://lmphotography641.wordpress.com/2019/10/27/installing-google-play-store-for-mate-30-pro/
Click to expand...
Click to collapse
I tried to download.. It says can't open link.
ataraxist said:
I tried to download.. It says can't open link.
Click to expand...
Click to collapse
It should be able now. I just moved to another file sharing services
wolfgart said:
Thanks Bro.
Do you think this guide will work today for a fresh install ?
Click to expand...
Click to collapse
Yes it does
Hey...
I just got my mate 30 pro.
Used this method and all works well...
Apart from a few apps.
LZ play Backup
Can you get me LZplay backup for some other huawei devices? Or can you modifiy it so that it restores on other devices too?
sagrlmsl said:
Can you get me LZplay backup for some other huawei devices? Or can you modifiy it so that it restores on other devices too?
Click to expand...
Click to collapse
Unfortunately I don't have that to test.
AwesomeARC said:
Hey...
I just got my mate 30 pro.
Used this method and all works well...
Apart from a few apps.
Click to expand...
Click to collapse
Which apps man?
leoking3 said:
Which apps man?
Click to expand...
Click to collapse
I've got every app I need so far besides YouTube tv
gharris040604 said:
I've got every app I need so far besides YouTube tv
Click to expand...
Click to collapse
Vanced YouTube
I can't get it to work!
When restoring using HiSuite, it responds with "Failed to restore".
I'm on build 10.0.0.134 of EMUI - could this be the problem? Is that the build that others have had success with?
CrustyNoodle said:
I can't get it to work!
When restoring using HiSuite, it responds with "Failed to restore".
I'm on build 10.0.0.134 of EMUI - could this be the problem? Is that the build that others have had success with?
Click to expand...
Click to collapse
1. Check your drivers and make sure they're all installed properly
2. Make sure you use the provided cable
3. Need to have a Sim card inside and also logged into huawei account
4. USB debugging needs to be turned on and also the hisuite USB access.
Had the same issue too and doing all the above plus a a reboot or two and it worked fine after that. Firmware versions doesn't effect it.
Hi, plan on this phone as my daily driver so I will probably runs anything on it, including sensitive banking and security apps, I have saw lots not recommending using this method as it opened up some loopholes (i.e. Google SafetyNet failed), any source or research being done that pointed out any insecurity of using such method? (i.e. Prone to information leaking, etc.)
Thank you in advance. Great community!
Only thing I cant make work is Google saved passwords...
leoking3 said:
Only thing I cant make work is Google saved passwords...
Click to expand...
Click to collapse
Works for me. Have you set Google as the default Autofill provider?
AwesomeARC said:
Hey...
I just got my mate 30 pro.
Used this method and all works well...
Apart from a few apps.
Click to expand...
Click to collapse
onslaught86 said:
Works for me. Have you set Google as the default Autofill provider?
Click to expand...
Click to collapse
Ha! I knew it was a setting I forgot. No I havent, thank you!
Hi all,
After installed success, can I unstall LZPlay app?