I followed this guide [GUIDE] MAC Rooting Nexus S (http://forum.xda-developers.com/nexus-s/general/guide-mac-rooting-nexus-s-t878446) until point
6) Open ROM Manager and choose "Flash ClockworkMod Recovery". At this point you are all set .
Click to expand...
Click to collapse
As Rom manager rebbot doesn't work, I installed Root checker and it told me thet the phone was not rooted properly. So I decided to follow another guide [HACK] Superboot Method for 2.3.2 (GRH78C) (http://forum.xda-developers.com/nexus-s/development/hack-superboot-method-2-3-2-grh78c-t927838).
Now the phone doesn't work! In other words when I press the power button the Google logo screen remains and Android doesn't start.
If i hold volume up and power button I gain the following:
Code:
Fastboot mode
Product name: Hearing
Hw version - rev 52
Bootloader version - I902XXLC2
Baseband version - I902XXKI1
Carrier info - EUR
Serial number - 3035...
Lock state - unlocked
and I can choose:
Code:
[LIST]
[*]Reboot bootloader
[*]Reboot
[*]Recovery
[*]Power off
[/LIST]
I think that the problem is that the phone is looking for the file "install-recovery.sh" that I renamed into "install-recovery.sh.old".
How can I reanimate my Nexus S?
Nicolaesse said:
I followed this guide [GUIDE] MAC Rooting Nexus S (http://forum.xda-developers.com/nexus-s/general/guide-mac-rooting-nexus-s-t878446) until point
As Rom manager rebbot doesn't work, I installed Root checker and it told me thet the phone was not rooted properly. So I decided to follow another guide [HACK] Superboot Method for 2.3.2 (GRH78C) (http://forum.xda-developers.com/nexus-s/development/hack-superboot-method-2-3-2-grh78c-t927838).
Now the phone doesn't work! In other words when I press the power button the Google logo screen remains and Android doesn't start.
If i hold volume up and power button I gain the following:
Code:
Fastboot mode
Product name: Hearing
Hw version - rev 52
Bootloader version - I902XXLC2
Baseband version - I902XXKI1
Carrier info - EUR
Serial number - 3035...
Lock state - unlocked
and I can choose:
Code:
[LIST]
[*]Reboot bootloader
[*]Reboot
[*]Recovery
[*]Power off
[/LIST]
I think that the problem is that the phone is looking for the file "install-recovery.sh" that I renamed into "install-recovery.sh.old".
How can I reanimate my Nexus S?
Click to expand...
Click to collapse
Find wuggs Nexus Root Toolkit... Read the thread and you'll have your phone back..
Sent from my OnePlus ONE
Setting.Out said:
Find wuggs Nexus Root Toolkit... Read the thread and you'll have your phone back..
Sent from my OnePlus ONE
Click to expand...
Click to collapse
Thanks, which is the option to choose?
I think 5 and then 3.
After reanimating the devide I'd like to install Kit Kat version of Android on it so I need a rooted smartphone.
1. Unlock the Bootloader
2. Flash ClockworkMod/TWRP Recovery
3. Root the Device
4. Lock the Bootloader
5. Flash Google Factory Image
6. Donate
0. Exit
Click to expand...
Click to collapse
Nicolaesse said:
Thanks, which is the option to choose?
I think 5 and then 3.
After reanimating the devide I'd like to install Kit Kat version of Android on it so I need a rooted smartphone.
Click to expand...
Click to collapse
I'm going to put it step by step using the Nexus root tool kit (NRTK)
1. download a flashable recovery of your choice (CWM 6.0.4.3 Philz 6.19.3 or TWRP 2.7.0 or higher on all these)
2. download the kitkat rom you want to install
3. download the Gapps that match the rom you chose ( if a 4.4.2 rom get a 4.4.2 gapps if 4.4.4 then 4.4.4)
4. boot your phone into bootloader / fastboot
5. connect your phone to your pc (it should recognize it)
6. open your NRTK and go to the advanced section and choose to temporarily boot custom recovery (this will be TWRP 2.6.3)
7. ON YOUR PHONE select mount usb
8. ON THE COMPUTER open the device/folder for your phone and create a new file on your SD card ( I called mine " !zip " this kept it ontop of the list of files) and copy the recovery, rom, and kernel to this folder.
9. ON YOUR PHONE unmount usb, return to the main menu screen and select install, find that folder you made and select the recovery zip that you copied and swype to install
10. after it installs (10seconds) return to the main menu, select reboot then reboot recovery ( you may get a warning about not having a rom or su, ignore both)
11. now you are on your KK compatible recovery (nearly there)
12. No matter which recovery you chose find the section to wipe or format your phone (DO NOT WIPE OR FORMAT YOUR SD CARD !!!! this will wipe everything off your phone and may make it hard / impossible to restore) and ONLY wipe or format system, cache, and dalvik partitions. On philz there is an option to wipe to install a new rom (this is a onestep version of the above)
13. return to the main menu page and select install, choose your rom and install, then your gapps and install ( if on TWRP you can select both by choosing the option to add a zip to flash)
14. the moment of truth, now that you have flashed both rom and gapps, you need to return to the main menu and select reboot and reboot system...
15. assuming you did all of this issue free, you are free to enjoy your phone..
*if you don't have your phone recognized by your computer / NRTK, you need to follow the instructions for NRTK to get the correct drivers for your computer
**if you are not clear on what you are doing, ask before you make a mistake
***Your custom rom will be pre-rooted, so no need to try to root it
Unbrick Redmi 1s unbrick (indian version) rooting, installing CWM & custom ROM guide.
Installing CWM touch recovery on Redmi 1s (Indian version)
Method 1: By flashing through stock recovery.
Step 1: Download "signed_cwm_update" and rename it as "update.zip".
Step 2: Connect your mobile place "update.zip" in root folder of your mobile internal memory.
Step 3: Switch off your mobile and start your mobile in recovery mode by pressing ( Volume up + Power ) key combination.
Step 4: In the recovery menu choose english
step 5: Apply Update to system confirm it by power button
Step 6: Reboot System and start your mobile in recovery mode by pressing ( Volume up + Power ) key combination this time your mobile will start in CWM recovery.
Method 2: By flashing through fastboot mode
Step1- Download file “Install CWM through Fastboot” file and extract zip file and place extracted “redmi” folder in your C: Drive
Step2- Open CMD and Type “cd..” one or more times to get in C:drive and now it will look like C:\>
Step 3: Type “cd redmi” and now it will look like C:\>redmi>
Step 4: Type command “Fastboot flash recovery cwm.img”
Root redmi 1S (Indian version) with SuperSU installed (No native root method)
Step1: Download file "signed_cwm_update" and place it root of your internal memory and then rename it "update.zip".
Step 2: Switch off your mobile and start your mobile in recovery mode by pressing ( Volume up + Power ) key combination
Step3: In the recovery menu choose english
step 4: Apply Update to system confirm it by power button
Unbricking or installing Custom ROM on your bricked or unbricked Redmi 1s (Indian snapdragon version ) through CWM recovery.
Top 10 Features of Moded ROM (Custom_Redmi_1S_Rom_XDA_v37)
1) All bloatware were removed like Mi launcher, Mi themes, Google keyboard, file manager, weather widget and some live wall paper were removed as they were consuming much RAM.
2) Pre rooted and adblock binary installed for ad removing.
3) Added moded youtube which support HD playback and most ad gets removed.
4) Added holo launcher and multiling keyboard which consume very low ram.
5) Added UC mini browser as ther was no browser pre installed.
6) Added flash alert application for iphone like flash notification.
7) Boosted default ring tone volume by 150% as it is very slow.
8) Pre installed soft key.
9) Changed boot animation contains android logo sketch animation and it contain text “MARYAM”(My daughter name) and if you don’t like you can change this boot animation I will tell you later in thread.
10) Most of the time you get 400 – 500 MB ram free after cleaning your task manager.
Changelog in Version 37
Now your captured images and video will get saved in your Sdcard
Steps to change this setting : Goto setting -> storage -> Storage settings and choose External storage in camera option.
Step 1: download “Stock_stable_v36” or “Custom_Redmi_1S_Rom_XDA_v37” or “Stock_stable_v37” as per your requirement.
Download link for “Custom_Redmi_1S_Rom_XDA_v37.zip”
https://drive.google.com/file/d/0B6sbFLTmSeVHVXJzMFNrdUxqS0k/edit?usp=sharing
Download link for “Redmi_1S_v37.zip”
https://drive.google.com/file/d/0B6sbFLTmSeVHYUJyZDhUV2kwNHM/edit?usp=sharing
Download link for “stable-v36.zip”
https://drive.google.com/file/d/0B6sbFLTmSeVHdDRkZUNyY1ZVVmc/edit?usp=sharing
Step 2: Connect your mobile copy your ROM zip file in your SDcard1(Memory Card).
Step 3: Switch off your mobile and start your mobile in CWM recovery mode by pressing ( Volume up + Power ) key combination.
Step 4: Wipe cache partition.
Step 5: Select install zip option -> choose zip from sdcard and locate your ROM file and select that file for installation.
Step 6: wipe data/factory reset.
Step 7: Reboot system now.
Now Download link are working
:good:Like this thread if I have helped You
mod edit
Sent from my HM 1SW using XDA Free mobile app
Nice Social Work!!
compiro1 said:
If anyone needs redmi 1s pls pm me with ur name, address, mob no and email id before 5.30 pm (23 Sept, 2014) I will be happy to do COD to your place with the billing in your name
Click to expand...
Click to collapse
:good::good: Good Social work. Appreciate it...
All about Redmi 1s rooting, custom rom installation, upgrading to kitkat
Check my other threads about Redmi 1s rooting, custom rom installation, upgrading to kitkat
Mokee ROM For Xiaomi Redmi 1S - Android 4.4.4 Indian version
http://forum.xda-developers.com/android/general/mokee-rom-xiaomi-redmi-1s-android-4-4-4-t2886275
custom cyanogenmod android 4.4 ROM for redmi 1S with preinstalled xposed framework
http://forum.xda-developers.com/android/general/custom-cyanogenmod-android-4-4-rom-t2888971
Custom rom xiaomi redmi 1s indian version
http://forum.xda-developers.com/android/general/custom-rom-xiaomi-redmi-1s-indian-t2882604
Unbrick Redmi 1s unbrick (indian version) rooting, installing CWM & custom ROM guide
http://forum.xda-developers.com/android/general/redmi-1sindian-version-unbricking-t2882369
Root redmi 1S (Indian version) with SuperSU installed (No native root method)
http://forum.xda-developers.com/android/general/root-redmi-1s-indian-version-supersu-t2881416
:good:Press :good: Thanks button if I have helped You
One Stop For Everything Redmi 1S(With video tutorials)..Rooting..Custom ROMs..UNBRICKING YOUR REDMI 1S..FLASHING CUSTOM RECOVERY..FLASHING ROMS..etc!
Check it out
http://forum.xda-developers.com/showthread.php?t=2888916
Everything redmi 1s
Sent from my HM 1SW using XDA Free mobile app
Sent from my HM 1SW using XDA Free mobile app
Please move this topic to redmi section.
Thanks
While flashing CM 13 over my Redmi 1s, i happen to brick my phone and also lost IMEI and other details. Now only if i install stock rom of 56, i get back WIFI alone, still IMEI is gone. So sim cards not working.
Does installing the above stock ROMs, helps in this regards? (gaining back IMEI) or is there any other methods?
P.S: Tried almost all methods list on XDA, miui forums. No luck so far
Thanks
HOMTOM HT6 - 6250 Mah Battery - MT6735P 1,0 Ghz - 2 GB RAM - LTE - HotKnot -5,5" HD - Fastcharging
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STOCK Firmware:
http://www.needrom.com/download/homtom-t6/
Latest ROM is R17 - 20160513. You can update through OTA too.
Download: R17: https://yadi.sk/d/4AOdC_9hv3ttR
Do not OTA update if you have ROOT. - You will be in BOOTLOOP
It seems we can use ROM from DOOGEE T6 on HOMTOM HT6 too - BUT PRELOADER MUST BE UNCHECKED IN SPFlashTool
Link here: R05https://yadi.sk/d/fI3Q3DFTmphbW
R06 https://yadi.sk/d/jEYTpiNpndYT4
Custom Recovery:
TWRP 2.8.7.0 https://mega.nz/#!mhpmnIBR!3lqqnuBxC3WkF-b7_kjsIV_VkONopYhtl4hbGfmawBE
TWRP 3.0 https://mega.nz/#!Ho5DCR5D!mMachkzvD5YrJcnH5c0mHgM5mlji09emsU8wy_ZbxFM
TWRP 3.0.2 https://mega.nz/#!P8JS0JjA!2xvaHwOKMNCvwaA-HC4a6hLEDt-vXUsimwjCNTLnA9o
CWM https://mega.nz/#!75B2HaLL!5SREt62m0O5EqI2-Qpx2X9_rWpMEebSZ_aeamvUTvB4
Thanks jemmini , Hanuma50 and kalipso888- 4PDA.ru
BEFORE FLASHING TWRP RECOVERY. MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.
Drivers:
I am using this drivers without problem
Please download all these drivers:
Handset WinDriver v1.00.00.31 (Drivers for ADB, MTP, USB Mass Storages, etc)
DriverAutoInstaller v1.1236.00 (Drivers for MediaTek USB VCOM)
MediaTek USB VCOM Driver v1.1123.00 (MTK VCOM driver for Win 8.1 x64)
If you have Win8/8.1/10 - you must install DriverAutoInstaller_v1.1236.00 manually. Go to:
xxxx\DriverAutoInstaller_v1.1236.00\SmartPhoneDriver\x64 or X86\Infs and select usbvcom.inf and usbvcom_brom.inf > right click and select install. Some messages will appear > close it with click on OK button.
Now you must go same way with Unsigned infs folder. Go to : xxx:\DriverAutoInstaller_v1.1236.00\SmartPhoneDriver\x64\Unsigned infs and select all .inf files > right click and select install. Some messages - unsigned driver will appear, just ignore it and close it with ok button.
You should not have any problem with drivers from first and third link.
Now you have all important drivers installed.
Thanks [email protected] for drivers.
Flashtool:
https://mega.nz/#!O05Q2ZSL!mOVtYCDD2qhEoCdmATj3UKWmxLRF5H7EDeg-sUMK6Q8
ROOT:
BEFORE ROOTING - MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.
For ROOT your device please download this ZIP and flash it in TWRP recovery.
https://download.chainfire.eu/696/SuperSU/
You can ROOT your HT6 in stock recovery too. - download this zip and flash it in stock recovery:
https://mega.nz/#!nppWFBxA!fqYIakLzpSkZPM2ck2cFcMwhn0hpuUwMRNIKTiQ2mIQ
Patches and Fixes for HomTom HT6:
HT6/T6 Power fix:
This patch is for fix battery percentage drops - flash in TWRP + wipe cache, dalvik
this patch will take effect after cca 3 full charges.
download: https://mega.nz/#!X0QyhYJS!8EWhkit69S0eni3uX3rdy3pe_oerf-jVkiAoouJixlQ
Thanks: Mardaly - 4PDA.ru
source: http://4pda.ru/forum/index.php?s=&showtopic=709131&view=findpost&p=50595464
Xposed Framework:
1) you must have TWRP recovery installed and you must have ROOT
download xposed here:
.apk : http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
flashable .zip: in attachments
First install the apk, than flash the zip using twrp.
WARNING: First boot after install xposed will be very long - phone will be very long on android is upgrading screen and you will get a lot of reboot - 15, maybe more reboots. Dont worry, it is normal, after it xposed will work ok. Tested on my phone and all is ok.
screen - working xposed on ht6 - http://uploads.tapatalk-cdn.com/20160127/f11bc444bf2672c6d33141f71098f6df.jpg
For Xposed thanks to: Ryder55 @xda
If you like my work, please hit Thanks button.
HOMTOM HT6 - How to install TWRP recovery and ROOT this device.
Option 1 - Flashing TWRP and flashing supersu.zip
*NOTE: If you have ROOT, you can flash TWRP recovery via app Flashify - DL on google play.
1) download and install all drivers
2) download twrp recovery for HT6 and extract it somewhere.
3) download Flashtool
4) download supersu.zip and copy it in your sdcard.
5) turn phone off and prepare usb cable
6) open flashtool - http://postimg.org/image/929l19yjh/full/
7) select scatter file from extracted archive with twrp recovery for HT6 - http://postimg.org/image/6idy76azh/
8) make sure recovery is checked, select download only and click on download - http://postimg.org/image/siuanstnh/
9) now connect your phone via usb cable.
10) when flash is completed - green icon will appear - close it.
11) now you can unplug your phone and boot into TWRP
12) hold volume + and power in same time.
13) menu should appear, you can select recovery, bootloader, etc...
14) you can move in menu by pressing volume up. Volume down is confirm button.
15) select recovery
16) now you should be in twrp recovery.
17) select install, select supersu v2.46.zip and confirm flash.
18) now you have TWRP installed and ROOTED your HT6. You can go back, select reboot > system.
DONE.
Option 2 - flashing root via update.zip in stock recovery
1) download root update.zip and copy it on your sdcard after it go to settings> developer options > unlock oem and enable it.
2) turn off your phone
3) hold volume + and power in same time
4) in menu select recovery - move in menu by pressing volume + and confirm button in volume down button.
5) now you are in android recovery - now you must get acces in recovery menu.
6) hold power button and hit volume up button - menu should appear
7) select apply update from sdcard
8) select update.zip - in menu you can move via volume buttons - power is confirm button
9) confirm flash.
10) go back . . / and select reboot system now
11) now you have rooted your HT6 via stock recovery.
Option 3 - flashing root via update.zip -easiest way
1) download root update.zip from first post.
2) go to settings> developer options > unlock oem and enable it, after it go to settings>about phone > wirelles update
3) in right corner select ... (three dots) > select local updates and select update.zip
4) confirm update - phone reboots and install update automatically
5) You have ROOT
Custom ROMs
Leagoo Elite 5 For HomTom HT6
Download ROM: https://drive.google.com/file/d/0B_WxPbXlWh9pUzBVdmE2dHFKOTA
Thanks: Keksik1980 - 4PDA for port.
bugs: -
YunOS 3.0.5 for HomTom HT6
Download ROM: https://yadi.sk/d/RAP0lnrytzcUX
Download camera fix: https://yadi.sk/d/ltn1w4vetzYN7
Thanks: Keksik1980 - 4PDA for port.
bugs: -
Languages: EN/RU
Resurrection Remix 5.5.9 for HomTom HT6
DL: https://yadi.sk/d/uzOOqngfu4YYY
Thanks: Keksik1980 - 4PDA for port.
bugs: ?
AOSP for HomTom HT6
DL:https://yadi.sk/d/TzRWvKedtxu8p
Thanks: Keksik1980 - 4PDA for port.
bugs: ?
CyanogenMod 12.1 for HomTom HT6
DL: https://yadi.sk/d/brKZT28-sRLdU
Thanks: lexa6074465 - 4PDA for port.
bugs: - camera works only on 8MP - no focus
HOMTOM HT6 Alternative Rom v3.0 Black Edition
source:http://4pda.ru/forum/index.php?showtopic=709131&st=1180#entry48056999
Download ROM:: https://yadi.sk/d/yfwbDvCXsJZo6
Patches:
-
Xposed:
flash zip: https://mega.nz/#!mxY1VLbK!jegzyjMEh8BG5TnhHQlSHjmmw2UgD6k74FDGY7B4e58
.apk: https://mega.nz/#!Ktg0xYTA!nXHfiEem64XKWjVJdz5wVEI3PGtdZUmn7Q52AVO6drM
first install .apk, after it flash zip.
Thanks [email protected]
-----------------------------------------------------------
AoROM v1 - MOD ROM from Oukitel K6000 for HT6
Thanks kalipso888 - 4pda.ru
Download ROMhttps://yadi.sk/d/dw8_W5g3oqYCA
Download Patch v1 - https://mega.nz/#!uooAwZSB!ENDXswGE8cOgM2S4mfzCV73QioPs_aFuSfgmwnfJAoA
Download better camera libs: https://mega.nz/#!Cx5kiaxB!cTinf0Fof7OaN6dqdkjDShTI9Q-wJCTnLGxScdD_TQY
Thanks madarly - 4pda.ru for patch, libs and sdfix
Thanks: 4pda.ru http://4pda.ru/forum/index.php?showtopic=709131&st=780#entry47119937
some changes:
Better camera quality
Better battery life
Better network managment
Dolby Atmos
Better performance
Faster and smoothest UI
Better speaker and headphone output quality
Faster wifi connection
Better RAM managment
Updated Google Apps
Lower phone temperature
Alarm working in quet mode
Better APN settings
DingDing Heat8 ROM for HT6
link: http://forum.xda-developers.com/showpost.php?p=65765910&postcount=123
HOMTOM HT6 - STOCK ROMs from DOOGEE T6 flashable in TWRP
Doogee T6-R06 DEODEX
https://yadi.sk/d/SW0I3rgFnicma
Doogee T6-R05 DEODEX_v1
https://yadi.sk/d/8Mch4uLOnjr94
Thanks to: mardaly @4pda.ru
Unbrick Tutorial / Back to STOCK ROM Here is unbrick/update tutorial for those who are in bootloop, or for those, who want to update or restore phone to stock ROM with SPFlashTool method.
*NOTE: READ!!!! All your files will be deleted. Please backup your internal storage.
This process will not format your SDcard.
*NOTE2: If you dont want to lose your phone data, you must uncheck userdata field in flashtool. - Step 4E
- This step is experimentall and it can cause problems and bad system stability. Please do not use this step if you are comming back to stock/official rom from custom rom.
- This step is possible to use, if you are restoring your phone from bootloop after OTA update on rooted phone.
---------------UNBRICK GUIDE-----------------
1) Download all important files:
A) Download all Drivers from first post and install it. - If you have win8/8.1/10 use my tutorial how to install it - in first post too. - here
B) Download latest STOCK ROM from here and extract it : http://www.needrom.com/download/homtom-t6/ (latest version is R17 - 20160513, maybe Homtom will release new updates, just download latest version - R17 here: https://yadi.sk/d/4AOdC_9hv3ttR)
C) Download flashtool from here and extract it: https://mega.nz/#!O05Q2ZSL!mOVtYCDD2qhEoCdmATj3UKWmxLRF5H7EDeg-sUMK6Q8
2)Power off your phone - if you are in bootloop just hold power button until phone power off.
3) Prepare original Homtom USB(charging) cable - Do NOT connect your phone in PC - I will tell you when you must connect your phone.
4) Follow this pictures:
A) In PC open Spflashtool folder and open Flashtool as administrator - http://s22.postimg.org/5na2xf4ip/ht6unbrick1.png
B) Press ok button - http://s22.postimg.org/ti7v9izkx/ht6unbrick2.png
C) Select scatter loading button - http://s22.postimg.org/ttpbmag0x/ht6unbrick3.png
D) Navigate to extracted STOCK ROM folder and sellect android scatter file - http://s22.postimg.org/y1k3v1hgh/ht6unbrick4.png
E) Make sure - all things like system,recovery,userdata,preloader,tee1,tee2,etc are checked, select download only and select Download button with green arrow. - http://s22.postimg.org/r261vohi9/ht6unbrick5.png
F) Make sure your phone is still powered OFF. Now you must connect phone to PC with Original USB cable
G) flashing proces should start - http://s22.postimg.org/ixxxqxv35/ht6unbrick6.png on the bottom of flashtool you can see yellow bar with percentage.
H) When process is finished - green symbol will appear - http://s22.postimg.org/8p5gl471d/ht6unbrick7.png
I) Now you can close this window, unplug your phone and close flashtool application.
J) You can power on your phone. First boot is little bit longer than normal boot, so just wait until android will boot completely.
K) Enjoy
Touchscreen Fix Tutorial By Spoooky1
I finally got success to recover my touchscreen so I submit my tutorial.
First, there is no need for some chineses softwares like 360??? (setup_10.2.0.2001a.exe or instmobilemgr.exe). The really most important is :
- a HT6 rooted
- a PC with adb drivers installed
- download HT6digitizer.zip, unzip it on the desktop (for instance)
Step 1 : power on the HT6 with a BT mouse (or a USB mouse plugged with OTG cable) and go to :
Settings -> Developer options -> enable Stay awake and USB debugging (both are very important !)
Step 2 : connect the HT6 and the PC with a USB cable
on the PC, go to HT6digitizer folder and launch a MSDOS window (in admin mode) then type adb devices inside
if your HT6 is unauthorized then take a look at your HT6 and go next step, else go to step 5
Step 3 : the most difficult without a BT mouse ! :crying:
This popup should appear and you have to select "Always allow from this computer" and click OK
Step 4 : If the previous job is well done, type again adb devices and now your HT6 is authorised (else disconnect the HT6 and go back to Step 2)
Step 5 : type adb shell ls /proc/gm* in the MSDOS window and NOTE the result (very important !!)
(the result is /proc/gmnode20160312 in my case)
Step 6 : On the PC, go to HT6digitizer folder and launch GtpAdbTool_ENU.exe (in admin mode)
Fill the popup with the previous result and click on Determine button
Step 7 : then IC type and IC version should appear. Click on Browse button
Step 8 : choose the GT9157_Config_20160305_225004.cfg file and click on Open (Ouvrir in french :angel: )
Step 9 : select Send config and click on Perform operation
Step 10 : Finish ! all is green, you can use your touchscreen
Special Thanks to : kalipso888 , Ax1qwer , flasource_ , Zeggi :good:
Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Ce...2W-Quick-Charge-2_0-Power-Bank-p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.
clio94 said:
Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Ce...2W-Quick-Charge-2_0-Power-Bank-p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.
Click to expand...
Click to collapse
Hi, I am using Xiaomi 10400mah powerbank and charging is fast.
HT6 using Mediatek Pump Express fast charging technology and I think it is not compatible with Qualcomm Quick charge. But maybe I am wrong.
TWRP flashing tutorial + root guide with pictures comming soon.
Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!
Archah said:
Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!
Click to expand...
Click to collapse
I think icon can be deleted via Xposed, but there is no working Xposed for HT6 now, we must wait for clear AOSP custom ROM, xposed should be running fine on it.
Now xposed is not working on HT6.
Edit: TWRP flashing and ROOTING tutorial added in second post
why you dont use option 2 . it is more easy ?
There is a third option at the root, load a package update.zip system in place upgrade, select the file and restart the phone.
@ Ax1qwer -Please add the 3 options - quick and easy
You can install Xposed using xposed 3.0 alpha 4 and flashing xposed 79__ver22.zip from twrp. You can find the how to on xda. Im currently running xposed on my HT6. Thanks for your flashing guide.
Easiest way to root the ht6 is to download update.zip for the stockrom, go to settings-about-wireless update-menu and select local update-choose the update.zip file and select update. It should flash from there.
Hi, thanks ozmatox and Ryder55. I will try xposed and i will add 3rd root option - it is same as option 2, but phone reboot to recovery and flash update.zip automatically
Odesláno z mého HT6 pomocí Tapatalk
Mobile rooted. Thx
Everyone have change dpi ? Witch dpi is compatible ?
Ryder55 said:
You can install Xposed using xposed 3.0 alpha 4 and flashing xposed 79__ver22.zip from twrp. You can find the how to on xda. Im currently running xposed on my HT6. Thanks for your flashing guide.
Easiest way to root the ht6 is to download update.zip for the stockrom, go to settings-about-wireless update-menu and select local update-choose the update.zip file and select update. It should flash from there.
Click to expand...
Click to collapse
Please give us a link for working xposed, thanks. I searched for google for xposed 79__ver22.zip, but no success. Thanks.
Edit: root via local updates added
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
This is the apk
http://forum.xda-developers.com/attachment.php?attachmentid=3580244&d=1450386592
This is the zip
First install the apk, then flash the zip using twrp. Hope the links work. I'm a bit new to xda
Sent from my HT6 using XDA Free mobile app
I installed xposed apk, after it I flashed TWRP via SPflash tool, I booted in TWRP and flashed xposed zip and supersu.zip, but my phone is in bootloop now. I am using latest R14 ROM., I think this xposed is not working on HT6.
Ax1qwer said:
I installed xposed apk, after it I flashed TWRP via SPflash tool, I booted in TWRP and flashed xposed zip and supersu.zip, but my phone is in bootloop now. I am using latest R14 ROM., I think this xposed is not working on HT6.
Click to expand...
Click to collapse
You should have installed SuperSU before flashing xposed. I am using the R14 firmware with xposed and running xprivacy so I know for sure that xposed is working. My phone has entered a form of bootloop where it tries to optimize apps but this doesnt happen very often and sometimes it ceases when left alone. Anyways those are the steps I followed to get xposed working.
Sent from my HT6 using XDA Free mobile app
Ryder55 said:
You should have installed SuperSU before flashing xposed. I am using the R14 firmware with xposed and running xprivacy so I know for sure that xposed is working. My phone has entered a form of bootloop where it tries to optimize apps but this doesnt happen very often and sometimes it ceases when left alone. Anyways those are the steps I followed to get xposed working.
Sent from my HT6 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, I know - my mistake. I uninstalled Xposed and flashed it again, but still reboots on android is upgraging screen
EDIT: Many and many reboots, but it seems Xposed is working and phone boots up sucessfully But about 15, maybe more reboots.
Last week I rooted my J7 2016 without problem. I installed TRRP 3.1.1-0 (j7xelte) with ODIN 3.12.3 and flashed the latest SuperSU v2.82 Zip. I then reflashed a stock ROM because I needed an official system for my banking app. After I installed the app on my old Xperia E1 I tried to root my J7 again but it doesn't work anymore. Stock rom used: https://www.sammobile.com/firmwares/ssp/SM-J710FN/XEF/download/J710FXXU3AQF8/187083/ (updated to Android 7.0 with system update)
The problem is that I'm getting a black screen after the boot logo with the message "Verification Failed. Unable to restart your device. The Integrity verification has failed. You need to reset your device to factory default settings. This will erase all your data." on it with a "Reset" option below it. In TWRP I also often get the errors "Unable to mount '/data' " or "Unable to mount '/storage' ", but I've seen YouTube videos where peoples phones restart no problem with the same mount errors appearing.
USB Debugging and OEM Unlock were enabled and FRP Protection disabled.
I tried the following but it doesn't work no matter what I do, and this is annoying me big time because last week it worked no problem:
- Rooting on Android 6.0.1 and 7.0
- Wipe complete system (TWRP with the "type: Yes" confirmation), TWRP factory reset wipe and individual folder wipes to remove possible Samsung encryptions.
- Reformat "data" to ext3, exFat, ext4 ... but the unable to mount option reappears.
ROOT METHODS:
1. Root guide by jcadduono (this worked last week, now it shows the "Verification Failed" error on startup)
https://forum.xda-developers.com/ga...ecovery-official-twrp-j7xelte-galaxy-t3437659
2. Root package from: https://desktop.firmware.mobi
Flashing the image only results in a red one-line "Recovery is not Seandroid Enforcing" message on startup and the phone boots to unrooted OS
3. Root with Magisk-v14.0 (results in TWRP error that zip flash failed)
4. Package and tutorial by The Phone Skipping: https://www.youtube.com/watch?v=bkT8kZ8hb28
5. Flashing no-verity-opt-encrypt-5.1.zip and samsung-sm-j710f-6.0.1-nodmv.tar after the "Verification Failed" error appears
6. KingRoot app rooting (Xperia E1 no problem, J7 not supported)
I'm running out of solutions and I've already spent at least 10 hours on this including an all-nighter.
Nevermind, I followed the YouTube tutorial "How To Install TWRP & Root Galaxy S7|S7 Edge" by Shark Jungle for installing everything without my external SD card and it works now.
Hello Ollion9,
I have recently bought a j710-fn (I want a removable battery). I first installed a stock rom 6.0.1 from SamMobile https://www.sammobile.com/firmwares/ssp/SM-J710FN/XEF/download/J710FXXU3AQF8/187083/
and I did not root it yet. A few days later I have the 7.0 system update which of course I install.
And now I want to root my phone.
Which of the "root methods" you propose is the simplest ?
I want to root my phone with my stock Samsung rom for installing AdAway & Xposed Framework.
On my previous phones I used CF Auto Root, which was great and easy to install but is not available for the j710fn.
So which method can I use knowing that my technical knowledge is very limited ?
I think I should not be using the following method because the 710fn is not in the list : https://forum.xda-developers.com/galaxy-j7/how-to/how-to-root-twrp-install-xposed-t3328580
Thanking you in advance for your kind answer
1382 said:
Hello Ollion9,
I have recently bought a j710-fn (I want a removable battery). I first installed a stock rom 6.0.1 from SamMobile https://www.sammobile.com/firmwares/ssp/SM-J710FN/XEF/download/J710FXXU3AQF8/187083/
and I did not root it yet. A few days later I have the 7.0 system update which of course I install.
And now I want to root my phone.
Which of the "root methods" you propose is the simplest ?
I want to root my phone with my stock Samsung rom for installing AdAway & Xposed Framework.
On my previous phones I used CF Auto Root, which was great and easy to install but is not available for the j710fn.
So which method can I use knowing that my technical knowledge is very limited ?
I think I should not be using the following method because the 710fn is not in the list : https://forum.xda-developers.com/galaxy-j7/how-to/how-to-root-twrp-install-xposed-t3328580
Thanking you in advance for your kind answer
Click to expand...
Click to collapse
The video I mentioned in my second post works perfectly, however the video doesn't include how to install TWRP though so here is a step by step tutorial that I've written down for myself in case I ever forget and I have to root again in the future:
1. Install ODIN and Samsung USB Drivers on PC
ODIN: https://www.odindownload.com
Drivers: http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
2. On phone, enable developer options (Settings -> About device -> Software Info -> Tap 7 times on Build number)
3. Settings -> Developer options -> OEM unlock (enable) + USB debugging (enable)
[Without OEM unlock Factory Reset Protection (FRP) will be active and the device will not (re-)boot when rooted and prevents installation of recovery software]
4. Turn off device
5. Boot into Download Mode (Volume Down + Home + Power)
6. Press Volume Up to confirm
7. Plug USB cable into phone
8. Open ODIN on PC and disable "Auto Reboot" in Options tab
[When phone is recognized the Log window should say "Added!"
9. Add "twrp-3.1.1-0-j7xelte.img.tar" to AP section of ODIN
Download here: https://eu.dl.twrp.me/j7xelte/
10. Click "Start" and wait until ODIN has finished
11. Turn off phone (remove and reinsert battery) and unplug USB cable
12. Boot into Recovery Mode (Volume Up + Home + Power)
13. In TWRP swipe "Swipe to Allow Modification" to the right
14. Tap "Wipe" and then "Format Data" (confirm by typing "yes")
15. Click TWRP Home button (house)
16. Plug USB cable into phone
17. On PC copy and paste the "No Verify" and "SuperSU" zip files onto the "Internal Storage" of the phone
Downloads:
SuperSU: https://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
No Verify: https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
18. In TWRP tap "Install" and find the previously copied zip files
19. Tap "SR5-SuperSU-v2.82-SR5-20171001224502.zip" and swipe to flash the file (wait until the process is done)
20. Click TWRP Home button (house)
21. Tap "no-verity-opt-encrypt-5.1.zip" and swipe to flash the file (wait until the process is done)
22. Tap "Reboot System" (if the phone doesn't reboot with the button swipe the "Install TWRP App" button to the right to reboot)
23. Wait for the phone to boot and go through the first installation process
24. The device is now rooted
Thank you very much for posting your step by step tutorial.
I will try it this week.
Hello Ollion9.
This method works on a Samsung Galaxy J7 2016 (SM-J710FN) right?
I'm asking because I've tried a similar procedure on my phone, but with a diferent version of SuperSU and my camera and flashlight crashed imediatly... So I guess I should try your method to see if it works....
Thank you very much in advance.
PS: sorry for my english but I'm Portuguese and English it's really not my strong suite.
Ollion9 said:
Nevermind, I followed the YouTube tutorial "How To Install TWRP & Root Galaxy S7|S7 Edge" by Shark Jungle for installing everything without my external SD card and it works now.
Click to expand...
Click to collapse
thank you it work very good man:good::good:
Will i be able to install the stock Android Oreo Official Rom?
Will i be able to install the stock Android Oreo Official Rom again?
If yes please help me with the steps.
I was trying to root with another method,my device didn't root but my knox is void and I'm not receiving any updates.
Please help me out.
samsung j7 sm-j710mn cant flash supersu... and why do i have only 3 options when boot in twrp
Only 3 options when I boot to twrp.?
Tutorial to root and flash rom for Alcatel Onetouch Idol 3 5.5 (6045Y) with MM 6.0.1
Benefits
- remove bloatware from Alcatel/TCL
- clean up/speed up the phone
Context
Since MM 6.0.1, fastboot commands are blocked. There are 2 solutions to root and install a new rom for 6045Y. Downgrade to LP 5.0.2 or use a great tool created by DeckerSu with the following tutorial:
Step 1: Prepare the phone
1.0 Backup your phone (photos, contacts...)
1.1.Access the developer mode by clicking 7 times on About Phone
1.2 Enable the 2 following items in Developer options and validate when necessary :
- USB debugging
- OEM unlocking
Step 2: Install TWRP
2.1. Download the adb fastboot package and install it
2.2 Install Alcatel drivers by downloading Mobile_Upgrade_Q. Mobile_Upgrade_Q_5.1.8 is available and that what I used but could not find the link.
2.2 Download Alcatel Flasher from here, install it, launch it as admin
2.3 Download TWRP
2.4 Put your phone in download mode. To do this, connect the powered off phone to PC via USB-cable and hold Volume Up + Volume Down + Power buttons
2.5 Follow this how to from steps 5 to 10.
2.6 Change the path of recovery to the TWRP file previously downloaded and click Write, then No. Reboot into recovery by holding Volume Up button and pressing Power
2.7 (optional) Wipe cache/dalvik if bootloop
Step 3: Install SU
3.1 download SU zip file (Recovery flashable)
3.2 transfer the file to the phone, reboot the phone into recovery, click install in TWRP, select the SU file, install, wipe cache/dalvik, reboot
Step 4: flash ROM
4.1 download the Resurrection Remix rom from the dedicated XDA thread
4.2 transfer the file to your phone, reboot your phone on recovery, wipe to factory reset in TWRP, click install in TWRP, select the downloaded file, install, wipe cache/dalvik, reboot
Step 5: install Gapps
5.1 download the arm64 7.1 Pico from OpenGApps
5.2 transfer the file to your phone, reboot your phone on recovery, click install in TWRP, select the downloaded file, install it and reboot
Done ! You can now download whatever applications you need via Google Play
Enjoy !