Related
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Someone please confirm if this thing works
Its
bumjrah said:
Someone please confirm if this thing works
Click to expand...
Click to collapse
Check out.
http : // ngashsk.blogspot.com/p/alcatel (dot) html
Av tried it but its not working well with 4010D as only one simcard being detected
Link Below?
loxdon said:
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Click to expand...
Click to collapse
Can anyone verify if the files dowload links are removed, or it´s just me that I don´t find them?
1
:22
working for sure
just visit mutaanto(dot)wordpress(dot)com....u will find the zerostorm rom for alcatel 4010x..working perfectly
http://www.mediafire.com/download/djg7n8ukahdac45/Custom_Gingerx_katv2_by_DrunkenLizard.rar
Rom for the 4010X not D, X!!
Normal flashing instructions, full wipes, install, flash enclosed CWM backup, flash a few zips..etc... included in the readme file. Not my rom, found it here: http://www.youtube.com/watch?v=Kere5VobLC0 and not my phone, so risked it. Works great and better than the xperia rom and stock anyway. Still need root uninstaller as bloat even on this one. After bloatware removal, there is maybe 130meg left ish, in system memory...
robneymcplum said:
http://www.mediafire.com/download/djg7n8ukahdac45/Custom_Gingerx_katv2_by_DrunkenLizard.rar
Rom for the 4010X not D, X!!
Normal flashing instructions, full wipes, install, flash enclosed CWM backup, flash a few zips..etc... included in the readme file. Not my rom, found it here: http://www.youtube.com/watch?v=Kere5VobLC0 and not my phone, so risked it. Works great and better than the xperia rom and stock anyway. Still need root uninstaller as bloat even on this one. After bloatware removal, there is maybe 130meg left ish, in system memory...
Click to expand...
Click to collapse
I need some help.
Did you had clockworkmod installed on the phone? If so, how did you installed it? Since the recovery.img way didn't work for me...The phone restarted, but no cwm at all...
Or you installed it without cwm?
Thanks in advance!
wex28 said:
I need some help.
Did you had clockworkmod installed on the phone? If so, how did you installed it? Since the recovery.img way didn't work for me...The phone restarted, but no cwm at all...
Or you installed it without cwm?
Thanks in advance!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2320583
alcatel one touch 4010x
hi guy i am trying to flash recovery into my alcatel one touch 4010x using sp flash tool now i tells me that my phone does not have a bootloader..
the phone wont boot to recovery..
it says download bootloader..
does anyone have a fix for this?
help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
worked for me.
loxdon said:
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Click to expand...
Click to collapse
thanks for the guide xda z the oñly place to be
kakalex said:
Av tried it but its not working well with 4010D as only one simcard being detected
Click to expand...
Click to collapse
So how did you solve the dual SIM issue?
Sent from my C2305 using XDA Free mobile app
DO NOT EVER TRY TO USE THIS FOR 4010D model. SECOND SIM UTILITY IS GONNA GET LOST!!
Can anyone please give me original rom backup for 4010D. My rom is crashed and I am not able to boot it. And PC also not detecting the device (May be problem with Drivers). I didn't took bakup, can you give ??
Hey guys, I'm trying to root this Alcatel 4010X and I'm following the instructions.
I installed the usb drivers to my laptop, installed ishuaji_root.exe an ran it..... Followed all the instructions and now my phone has restarted but has a lot of chinese writing - different apps etc, even though the phone language is still UK
I'm struggling with the next bit about installing CWM - I've installed it to my laptop via this https://www.xda-developers.com/how-to-install-clockworkmod/ link,but I'm unsure what I need to do now....
Does anyone know the newest version of android that will work on this handset?
itnorfolk said:
Does anyone know the newest version of android that will work on this handset?
Click to expand...
Click to collapse
There is no newer version. Only skinned versions of those newer ROMs.
So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
how to connect usb pen drive
How to connect pen drive and external hdd to spice mi 509
cwm has working on my mobile but without sp flash tool
prasad143 said:
cwm has working on my mobile but without sp flash tool
Click to expand...
Click to collapse
the mobile comes with its own custom recovery and does not allow any flashing. And above tutorial is for those who are facing problem in rooting mi509 with kitkat. and flashing CWM using spflashtool does not require root.
cyanogenmod
how to cyanogenmod on spice mi509
here is the new MERE rom from Mr. illusionist...
http://forum.xda-developers.com/android/general/mt6582-epic-rom-spice-stellar-t2998644#post58079880
they are uploading the file and will be soon available for download
New roms added including MIUI V6
New Roms added Including AWESOME MIUI V6 rom.
gautam.is.sharma said:
New Roms added Including AWESOME MIUI V6 rom.
Click to expand...
Click to collapse
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan
km230580 said:
Hi Gautam,
Can you please advice how to install MIUI V6 install on my Spice Mi 509,
I am install kingroot and rooted.
Can just download miui rom and copy in sd card and update?
MIUI rom update without PC its possible.
Kind Regards
Manoj K. Chauhan
Click to expand...
Click to collapse
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.
gautam.is.sharma said:
Bro you dont need pc and laptops for installation of custom roms just needed a rooted device with CWM Recovery.
you should be on stock KITKAT.
For MIUI installations install CWM/CTR first, if you are having CWM/CTR already, then just put miui rom in your sd card then go to recovery in spice mi509.
Now wipe data and format system, then install from sd card. and reboot. wait for 5 min, and there you will explore miui in MI509.
say thanks to the porter of the rom.
Click to expand...
Click to collapse
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....
km230580 said:
http://cdn4.xda-developers.com/images/icons/icon14.gif
Thanks for your reply gautam, I have Android 4.2.2 version in my phone.
Can you please advice what can i do? to install MIUI rom....
Click to expand...
Click to collapse
Click Thanks button instead of saying so. That helps a lot.
Flash stock Kitkat and then only you can install MIUI. Complete procedure is given in the first post.
NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857
saurabh1234 said:
NEW ROMS UPLOADED
FREEME OS-http://forum.xda-developers.com/android/development/mt6582-freeme-os-v3-0-spice-mi-509-t3051987
DarkL V1.6- http://forum.xda-developers.com/android/development/mt6582-darkl-v1-6-spice-mi-509-t3051857
Click to expand...
Click to collapse
Added your new roms.
This method work in spice steller mi 526?
gautam.is.sharma said:
So Guys I am here to give you all rooting tutorial for spice mi 509, how to install CWM recovery and firmwares installation
First of all download
SPflashtool(download here),
mtk droid tool(download here)
firmwares for spice m 509 download1, download2
ALL firmwares are stock firmwares
Flashing KitKat rom on spice mI 509
1: download firmware from this site(download Firmware v5). and extract it at a particular folder. In the firmware you will get spflashtool and drivers included. so if your drivers are not installed using usb cable install drivers from firmware.
2: now open spflashtool.exe and switch off your phone.
3: and click on scatter loading which is the second option in right and select MT6582_scatter_loading.txt file from firmware.
4: you will see many files are loaded.
5: now click download and connect your device without battery. when connected, press vol down so that spflashtool recognizes your device.
6: then you will see some blue and yellow bar filling up which means process is started. and when process completed you will see a green ring on the screen.
7: now start your device and enjoy KitKat on Spice Mi 509.
Now if you want to root your device
1: open mtk droid tool and switch off device
2: now connect the device using usb cable, while connecting press vol down button. this will install adb drivers of the device and if the drivers are already installed, mtkdroid tool will detect it.
3: now click on root at right corner of mtkdroid tool.
this will start rooting your device.
Now how to install CWM recovery in spice mi 509
1: open mtkdroid tool
2: click on root, recovery and backup and then select boot.img from the firmware downloaded above.
3: and you will see recovery file is made for the device
4: now close mtkdroid tool and place the CWM recovery(not boot patched), which you have made, in the firmware folder and rename it to recovery.img
5: now open spflashtool and load scatter file from firmware folder.
6: and uncheck all loaded files and only tick on recovery.
7: now click download and connect your device in switched off using USB cable and after connecting press vol down so that droid tool can detect your device.
8: and thus after the process completed you will see green ring. and now disconnect your device.
and open cwm recovery by pressing vol down and power button.
Now if above given rooting method does not work. use this method.
1: when you have installed CWM recovery download this super_SU zip.
2: and place this on your sd card
3: now open cwm in device and flash this zip by selcting install from sd and then select super_SU zip file.
4: your device is now rooted.
CUSTOM ROMS For Spice MI 509
1. FREEME OS(Awesome rom)- DOWNLOAD HERE
2. DARKL V1.6(Awesome)- Download Here
3. MIUI V6 5.4.10(Awesome rom, recommended)-> DOWNLOAD HERE
4. CLEANKAT V4.0(more free ram)- Download Here
5. Hive ROM (Awesome) -> Download Here
6. Touch OS (Fast and Smooth) -> Download Here
7. MERE(Most Epic Rom Ever)-> Download Here
Dolby Sound For Mere Rom- Download Here
8- Material V3 Rom-> Download Here
Fix For Material V3 Rom-> download here
9- Lewa OS V5 (only one bug-play store not wprking, use third party app)
DOWNLOAD HERE
10. LG G3 Clone Rom - DOWNLOAD HERE
11. Galaxy Rom- DOWNLOAD HERE
12. SlimFresh V9: DOWNLOAD HERE
13. XTREME os8: DOWNLAOD HERE
14. ANSP V4: DOWNLOAD HERE
Method to flash custom roms
1. You must be on Spice Stock Kitkat. Download from above link.
2. CWM/CTR must be installed.
3. Boot into recovery and Wipe Data-Factory Reset.
4. Now select Install zip and browse to the location where you have MERE ROM or MATERIAL V3 ROM zip and install it.
5. Reboot your device.
6. Flash the fix zip(only For Material Rom) and dolby digital zip(only for MERE Rom) after the first boot. We are done!
All the best!
Note:- I am not responsible for phone brick, tsunami or earth quake happens after this tutorial, if you follow!!!
:- flash dolby digital zip only for MERE rom
:- Flash fix.zip only for Material V3
Click to expand...
Click to collapse
This is work on spice Steller mi 526?
kevinsubba said:
This is work on spice Steller mi 526?
Click to expand...
Click to collapse
yes it will work......you only need to have your mi 526 firmware...not mi 509 firmware...
HOMTOM HT6 - 6250 Mah Battery - MT6735P 1,0 Ghz - 2 GB RAM - LTE - HotKnot -5,5" HD - Fastcharging
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STOCK Firmware:
http://www.needrom.com/download/homtom-t6/
Latest ROM is R17 - 20160513. You can update through OTA too.
Download: R17: https://yadi.sk/d/4AOdC_9hv3ttR
Do not OTA update if you have ROOT. - You will be in BOOTLOOP
It seems we can use ROM from DOOGEE T6 on HOMTOM HT6 too - BUT PRELOADER MUST BE UNCHECKED IN SPFlashTool
Link here: R05https://yadi.sk/d/fI3Q3DFTmphbW
R06 https://yadi.sk/d/jEYTpiNpndYT4
Custom Recovery:
TWRP 2.8.7.0 https://mega.nz/#!mhpmnIBR!3lqqnuBxC3WkF-b7_kjsIV_VkONopYhtl4hbGfmawBE
TWRP 3.0 https://mega.nz/#!Ho5DCR5D!mMachkzvD5YrJcnH5c0mHgM5mlji09emsU8wy_ZbxFM
TWRP 3.0.2 https://mega.nz/#!P8JS0JjA!2xvaHwOKMNCvwaA-HC4a6hLEDt-vXUsimwjCNTLnA9o
CWM https://mega.nz/#!75B2HaLL!5SREt62m0O5EqI2-Qpx2X9_rWpMEebSZ_aeamvUTvB4
Thanks jemmini , Hanuma50 and kalipso888- 4PDA.ru
BEFORE FLASHING TWRP RECOVERY. MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.
Drivers:
I am using this drivers without problem
Please download all these drivers:
Handset WinDriver v1.00.00.31 (Drivers for ADB, MTP, USB Mass Storages, etc)
DriverAutoInstaller v1.1236.00 (Drivers for MediaTek USB VCOM)
MediaTek USB VCOM Driver v1.1123.00 (MTK VCOM driver for Win 8.1 x64)
If you have Win8/8.1/10 - you must install DriverAutoInstaller_v1.1236.00 manually. Go to:
xxxx\DriverAutoInstaller_v1.1236.00\SmartPhoneDriver\x64 or X86\Infs and select usbvcom.inf and usbvcom_brom.inf > right click and select install. Some messages will appear > close it with click on OK button.
Now you must go same way with Unsigned infs folder. Go to : xxx:\DriverAutoInstaller_v1.1236.00\SmartPhoneDriver\x64\Unsigned infs and select all .inf files > right click and select install. Some messages - unsigned driver will appear, just ignore it and close it with ok button.
You should not have any problem with drivers from first and third link.
Now you have all important drivers installed.
Thanks [email protected] for drivers.
Flashtool:
https://mega.nz/#!O05Q2ZSL!mOVtYCDD2qhEoCdmATj3UKWmxLRF5H7EDeg-sUMK6Q8
ROOT:
BEFORE ROOTING - MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.
For ROOT your device please download this ZIP and flash it in TWRP recovery.
https://download.chainfire.eu/696/SuperSU/
You can ROOT your HT6 in stock recovery too. - download this zip and flash it in stock recovery:
https://mega.nz/#!nppWFBxA!fqYIakLzpSkZPM2ck2cFcMwhn0hpuUwMRNIKTiQ2mIQ
Patches and Fixes for HomTom HT6:
HT6/T6 Power fix:
This patch is for fix battery percentage drops - flash in TWRP + wipe cache, dalvik
this patch will take effect after cca 3 full charges.
download: https://mega.nz/#!X0QyhYJS!8EWhkit69S0eni3uX3rdy3pe_oerf-jVkiAoouJixlQ
Thanks: Mardaly - 4PDA.ru
source: http://4pda.ru/forum/index.php?s=&showtopic=709131&view=findpost&p=50595464
Xposed Framework:
1) you must have TWRP recovery installed and you must have ROOT
download xposed here:
.apk : http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
flashable .zip: in attachments
First install the apk, than flash the zip using twrp.
WARNING: First boot after install xposed will be very long - phone will be very long on android is upgrading screen and you will get a lot of reboot - 15, maybe more reboots. Dont worry, it is normal, after it xposed will work ok. Tested on my phone and all is ok.
screen - working xposed on ht6 - http://uploads.tapatalk-cdn.com/20160127/f11bc444bf2672c6d33141f71098f6df.jpg
For Xposed thanks to: Ryder55 @xda
If you like my work, please hit Thanks button.
HOMTOM HT6 - How to install TWRP recovery and ROOT this device.
Option 1 - Flashing TWRP and flashing supersu.zip
*NOTE: If you have ROOT, you can flash TWRP recovery via app Flashify - DL on google play.
1) download and install all drivers
2) download twrp recovery for HT6 and extract it somewhere.
3) download Flashtool
4) download supersu.zip and copy it in your sdcard.
5) turn phone off and prepare usb cable
6) open flashtool - http://postimg.org/image/929l19yjh/full/
7) select scatter file from extracted archive with twrp recovery for HT6 - http://postimg.org/image/6idy76azh/
8) make sure recovery is checked, select download only and click on download - http://postimg.org/image/siuanstnh/
9) now connect your phone via usb cable.
10) when flash is completed - green icon will appear - close it.
11) now you can unplug your phone and boot into TWRP
12) hold volume + and power in same time.
13) menu should appear, you can select recovery, bootloader, etc...
14) you can move in menu by pressing volume up. Volume down is confirm button.
15) select recovery
16) now you should be in twrp recovery.
17) select install, select supersu v2.46.zip and confirm flash.
18) now you have TWRP installed and ROOTED your HT6. You can go back, select reboot > system.
DONE.
Option 2 - flashing root via update.zip in stock recovery
1) download root update.zip and copy it on your sdcard after it go to settings> developer options > unlock oem and enable it.
2) turn off your phone
3) hold volume + and power in same time
4) in menu select recovery - move in menu by pressing volume + and confirm button in volume down button.
5) now you are in android recovery - now you must get acces in recovery menu.
6) hold power button and hit volume up button - menu should appear
7) select apply update from sdcard
8) select update.zip - in menu you can move via volume buttons - power is confirm button
9) confirm flash.
10) go back . . / and select reboot system now
11) now you have rooted your HT6 via stock recovery.
Option 3 - flashing root via update.zip -easiest way
1) download root update.zip from first post.
2) go to settings> developer options > unlock oem and enable it, after it go to settings>about phone > wirelles update
3) in right corner select ... (three dots) > select local updates and select update.zip
4) confirm update - phone reboots and install update automatically
5) You have ROOT
Custom ROMs
Leagoo Elite 5 For HomTom HT6
Download ROM: https://drive.google.com/file/d/0B_WxPbXlWh9pUzBVdmE2dHFKOTA
Thanks: Keksik1980 - 4PDA for port.
bugs: -
YunOS 3.0.5 for HomTom HT6
Download ROM: https://yadi.sk/d/RAP0lnrytzcUX
Download camera fix: https://yadi.sk/d/ltn1w4vetzYN7
Thanks: Keksik1980 - 4PDA for port.
bugs: -
Languages: EN/RU
Resurrection Remix 5.5.9 for HomTom HT6
DL: https://yadi.sk/d/uzOOqngfu4YYY
Thanks: Keksik1980 - 4PDA for port.
bugs: ?
AOSP for HomTom HT6
DL:https://yadi.sk/d/TzRWvKedtxu8p
Thanks: Keksik1980 - 4PDA for port.
bugs: ?
CyanogenMod 12.1 for HomTom HT6
DL: https://yadi.sk/d/brKZT28-sRLdU
Thanks: lexa6074465 - 4PDA for port.
bugs: - camera works only on 8MP - no focus
HOMTOM HT6 Alternative Rom v3.0 Black Edition
source:http://4pda.ru/forum/index.php?showtopic=709131&st=1180#entry48056999
Download ROM:: https://yadi.sk/d/yfwbDvCXsJZo6
Patches:
-
Xposed:
flash zip: https://mega.nz/#!mxY1VLbK!jegzyjMEh8BG5TnhHQlSHjmmw2UgD6k74FDGY7B4e58
.apk: https://mega.nz/#!Ktg0xYTA!nXHfiEem64XKWjVJdz5wVEI3PGtdZUmn7Q52AVO6drM
first install .apk, after it flash zip.
Thanks [email protected]
-----------------------------------------------------------
AoROM v1 - MOD ROM from Oukitel K6000 for HT6
Thanks kalipso888 - 4pda.ru
Download ROMhttps://yadi.sk/d/dw8_W5g3oqYCA
Download Patch v1 - https://mega.nz/#!uooAwZSB!ENDXswGE8cOgM2S4mfzCV73QioPs_aFuSfgmwnfJAoA
Download better camera libs: https://mega.nz/#!Cx5kiaxB!cTinf0Fof7OaN6dqdkjDShTI9Q-wJCTnLGxScdD_TQY
Thanks madarly - 4pda.ru for patch, libs and sdfix
Thanks: 4pda.ru http://4pda.ru/forum/index.php?showtopic=709131&st=780#entry47119937
some changes:
Better camera quality
Better battery life
Better network managment
Dolby Atmos
Better performance
Faster and smoothest UI
Better speaker and headphone output quality
Faster wifi connection
Better RAM managment
Updated Google Apps
Lower phone temperature
Alarm working in quet mode
Better APN settings
DingDing Heat8 ROM for HT6
link: http://forum.xda-developers.com/showpost.php?p=65765910&postcount=123
HOMTOM HT6 - STOCK ROMs from DOOGEE T6 flashable in TWRP
Doogee T6-R06 DEODEX
https://yadi.sk/d/SW0I3rgFnicma
Doogee T6-R05 DEODEX_v1
https://yadi.sk/d/8Mch4uLOnjr94
Thanks to: mardaly @4pda.ru
Unbrick Tutorial / Back to STOCK ROM Here is unbrick/update tutorial for those who are in bootloop, or for those, who want to update or restore phone to stock ROM with SPFlashTool method.
*NOTE: READ!!!! All your files will be deleted. Please backup your internal storage.
This process will not format your SDcard.
*NOTE2: If you dont want to lose your phone data, you must uncheck userdata field in flashtool. - Step 4E
- This step is experimentall and it can cause problems and bad system stability. Please do not use this step if you are comming back to stock/official rom from custom rom.
- This step is possible to use, if you are restoring your phone from bootloop after OTA update on rooted phone.
---------------UNBRICK GUIDE-----------------
1) Download all important files:
A) Download all Drivers from first post and install it. - If you have win8/8.1/10 use my tutorial how to install it - in first post too. - here
B) Download latest STOCK ROM from here and extract it : http://www.needrom.com/download/homtom-t6/ (latest version is R17 - 20160513, maybe Homtom will release new updates, just download latest version - R17 here: https://yadi.sk/d/4AOdC_9hv3ttR)
C) Download flashtool from here and extract it: https://mega.nz/#!O05Q2ZSL!mOVtYCDD2qhEoCdmATj3UKWmxLRF5H7EDeg-sUMK6Q8
2)Power off your phone - if you are in bootloop just hold power button until phone power off.
3) Prepare original Homtom USB(charging) cable - Do NOT connect your phone in PC - I will tell you when you must connect your phone.
4) Follow this pictures:
A) In PC open Spflashtool folder and open Flashtool as administrator - http://s22.postimg.org/5na2xf4ip/ht6unbrick1.png
B) Press ok button - http://s22.postimg.org/ti7v9izkx/ht6unbrick2.png
C) Select scatter loading button - http://s22.postimg.org/ttpbmag0x/ht6unbrick3.png
D) Navigate to extracted STOCK ROM folder and sellect android scatter file - http://s22.postimg.org/y1k3v1hgh/ht6unbrick4.png
E) Make sure - all things like system,recovery,userdata,preloader,tee1,tee2,etc are checked, select download only and select Download button with green arrow. - http://s22.postimg.org/r261vohi9/ht6unbrick5.png
F) Make sure your phone is still powered OFF. Now you must connect phone to PC with Original USB cable
G) flashing proces should start - http://s22.postimg.org/ixxxqxv35/ht6unbrick6.png on the bottom of flashtool you can see yellow bar with percentage.
H) When process is finished - green symbol will appear - http://s22.postimg.org/8p5gl471d/ht6unbrick7.png
I) Now you can close this window, unplug your phone and close flashtool application.
J) You can power on your phone. First boot is little bit longer than normal boot, so just wait until android will boot completely.
K) Enjoy
Touchscreen Fix Tutorial By Spoooky1
I finally got success to recover my touchscreen so I submit my tutorial.
First, there is no need for some chineses softwares like 360??? (setup_10.2.0.2001a.exe or instmobilemgr.exe). The really most important is :
- a HT6 rooted
- a PC with adb drivers installed
- download HT6digitizer.zip, unzip it on the desktop (for instance)
Step 1 : power on the HT6 with a BT mouse (or a USB mouse plugged with OTG cable) and go to :
Settings -> Developer options -> enable Stay awake and USB debugging (both are very important !)
Step 2 : connect the HT6 and the PC with a USB cable
on the PC, go to HT6digitizer folder and launch a MSDOS window (in admin mode) then type adb devices inside
if your HT6 is unauthorized then take a look at your HT6 and go next step, else go to step 5
Step 3 : the most difficult without a BT mouse ! :crying:
This popup should appear and you have to select "Always allow from this computer" and click OK
Step 4 : If the previous job is well done, type again adb devices and now your HT6 is authorised (else disconnect the HT6 and go back to Step 2)
Step 5 : type adb shell ls /proc/gm* in the MSDOS window and NOTE the result (very important !!)
(the result is /proc/gmnode20160312 in my case)
Step 6 : On the PC, go to HT6digitizer folder and launch GtpAdbTool_ENU.exe (in admin mode)
Fill the popup with the previous result and click on Determine button
Step 7 : then IC type and IC version should appear. Click on Browse button
Step 8 : choose the GT9157_Config_20160305_225004.cfg file and click on Open (Ouvrir in french :angel: )
Step 9 : select Send config and click on Perform operation
Step 10 : Finish ! all is green, you can use your touchscreen
Special Thanks to : kalipso888 , Ax1qwer , flasource_ , Zeggi :good:
Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Ce...2W-Quick-Charge-2_0-Power-Bank-p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.
clio94 said:
Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Ce...2W-Quick-Charge-2_0-Power-Bank-p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.
Click to expand...
Click to collapse
Hi, I am using Xiaomi 10400mah powerbank and charging is fast.
HT6 using Mediatek Pump Express fast charging technology and I think it is not compatible with Qualcomm Quick charge. But maybe I am wrong.
TWRP flashing tutorial + root guide with pictures comming soon.
Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!
Archah said:
Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!
Click to expand...
Click to collapse
I think icon can be deleted via Xposed, but there is no working Xposed for HT6 now, we must wait for clear AOSP custom ROM, xposed should be running fine on it.
Now xposed is not working on HT6.
Edit: TWRP flashing and ROOTING tutorial added in second post
why you dont use option 2 . it is more easy ?
There is a third option at the root, load a package update.zip system in place upgrade, select the file and restart the phone.
@ Ax1qwer -Please add the 3 options - quick and easy
You can install Xposed using xposed 3.0 alpha 4 and flashing xposed 79__ver22.zip from twrp. You can find the how to on xda. Im currently running xposed on my HT6. Thanks for your flashing guide.
Easiest way to root the ht6 is to download update.zip for the stockrom, go to settings-about-wireless update-menu and select local update-choose the update.zip file and select update. It should flash from there.
Hi, thanks ozmatox and Ryder55. I will try xposed and i will add 3rd root option - it is same as option 2, but phone reboot to recovery and flash update.zip automatically
Odesláno z mého HT6 pomocí Tapatalk
Mobile rooted. Thx
Everyone have change dpi ? Witch dpi is compatible ?
Ryder55 said:
You can install Xposed using xposed 3.0 alpha 4 and flashing xposed 79__ver22.zip from twrp. You can find the how to on xda. Im currently running xposed on my HT6. Thanks for your flashing guide.
Easiest way to root the ht6 is to download update.zip for the stockrom, go to settings-about-wireless update-menu and select local update-choose the update.zip file and select update. It should flash from there.
Click to expand...
Click to collapse
Please give us a link for working xposed, thanks. I searched for google for xposed 79__ver22.zip, but no success. Thanks.
Edit: root via local updates added
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
This is the apk
http://forum.xda-developers.com/attachment.php?attachmentid=3580244&d=1450386592
This is the zip
First install the apk, then flash the zip using twrp. Hope the links work. I'm a bit new to xda
Sent from my HT6 using XDA Free mobile app
I installed xposed apk, after it I flashed TWRP via SPflash tool, I booted in TWRP and flashed xposed zip and supersu.zip, but my phone is in bootloop now. I am using latest R14 ROM., I think this xposed is not working on HT6.
Ax1qwer said:
I installed xposed apk, after it I flashed TWRP via SPflash tool, I booted in TWRP and flashed xposed zip and supersu.zip, but my phone is in bootloop now. I am using latest R14 ROM., I think this xposed is not working on HT6.
Click to expand...
Click to collapse
You should have installed SuperSU before flashing xposed. I am using the R14 firmware with xposed and running xprivacy so I know for sure that xposed is working. My phone has entered a form of bootloop where it tries to optimize apps but this doesnt happen very often and sometimes it ceases when left alone. Anyways those are the steps I followed to get xposed working.
Sent from my HT6 using XDA Free mobile app
Ryder55 said:
You should have installed SuperSU before flashing xposed. I am using the R14 firmware with xposed and running xprivacy so I know for sure that xposed is working. My phone has entered a form of bootloop where it tries to optimize apps but this doesnt happen very often and sometimes it ceases when left alone. Anyways those are the steps I followed to get xposed working.
Sent from my HT6 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, I know - my mistake. I uninstalled Xposed and flashed it again, but still reboots on android is upgraging screen
EDIT: Many and many reboots, but it seems Xposed is working and phone boots up sucessfully But about 15, maybe more reboots.
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Custom ROM
- CyanogenMod 13 Beta 2 by "smurad-05": https://mega.nz/#!kMcRwTDb!1yrNzrP_XvqGyPcXzNF9eSRKfj1DpFixkUaNz_3OPAY
Stock (Android 6.0)
- 20161202: https://yadi.sk/d/rYoOTrUT32xDuL or http://www.leagoo.com.my/support/firmware/
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Download Only" instead.
Previous Releases:
- 20160909: http://leagooftp.com.my/M series/M5..._WF562G.LEAGOO.M0.HB.H.SSA.B18.0909.V3.03.zip
- 20160808 by "smurad-05": https://mega.nz/#!8V93SYaI!E4FOHWBxCFU6TKFmjguu7x3A3590Zt2W-c9KgNLgOLU
Flash Tool
- SP Flash Tool v5.1628 for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP (Universal), use the Scatter that comes with the latest Stock ROM linked above: https://github.com/VRNWALLE/Android/raw/master/MT6580/Leagoo m5/TWRP/recovery.img
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
CM13 & TWRP added to first post.
dear my freind, how to install twrp?
thanks
@yamani_25 - Haven't done it myself, but first root your phone (see bottom of http://giveawaytricks.in/install-cyanogenmod-13-leagoo-m5/) then install TWRP the same way but using the recovery.img that's in the TWRP.3.0.2 zip file.
vladhed said:
@yamani_25 - Haven't done it myself, but first root your phone (see bottom of http://giveawaytricks.in/install-cyanogenmod-13-leagoo-m5/) then install TWRP the same way but using the recovery.img that's in the TWRP.3.0.2 zip file.
Click to expand...
Click to collapse
I think install TWRP first than the device can be root. CMIIW
Sent from my M5 using XDA Premium 4 mobile app
yup, first you need TWRP for root the phone with SuperSu..
waiting for tutorial too..
from my x500 on TT
tutorial for installing custom recovery (twrp) and how to root
Hi guys! Here's a tutorial for installing custom recovery (twrp) and how to root Leagoo M5 cellphone.
First turn on the cellphone, go to "Settings>About phone" and enable "Developer options" by tapping on the "Build number" multiple times. Then go one step back, enter the "Developer options" and turn it on, and also enable the "OEM unlocking" and "USB debugging" options
Now you need to install custom recovery by following these steps:
1. plug the cellphone into pc, unzip and manually install drivers by going to "control panel>device manager" (select the device which needs drivers).
drivers are located here
https://drive.google.com/file/d/0B4PwJKhC6foZZnBzY0RPQnhHX2s/view?usp=sharing
2. download to pc and unzip the twrp custom recovery zip file
https://drive.google.com/open?id=0B4PwJKhC6foZc1czcnZtRXQ4eUU
3. download to pc and unzip the Sp Flash tool zip file
https://drive.google.com/open?id=0B4PwJKhC6foZcWJQVThGTGhzaTQ
4. download to pc, but do not unzip the "super su" file needed for root
https://drive.google.com/open?id=0B4PwJKhC6foZQzA0OGtYRTVRWnc
Now copy this "supersu" zip file to cellphone (e.x. into "Download" folder). Once you're done, disconnect the cellphone from pc and turn it off.
5. go into "Sp Flash tool" folder and run "flash_tool.exe" application. Click on the "Download tab" at the top and then on the "Scatter-loading" button to select a path to Scatter file which is needed to flash custom recovery. The file is located in the "TWRP_3.0.2" folder and it is named "MT6580_Android_scatter.txt". The mode for flashing should be "Download only". When you're sure that everything is setup correctly click on the "Download" button located in the top left part of the screen.
6. Now take out a battery from cellphone, wait 5 seconds, put it back in, and just connect the cellphone. Do not turn it on.
Windows (PC) should recognize the device, and the flashing process should start.
Note: if it says that there is no driver, then manually install it by following procedure on step 1.
When the flashing is done you'll see a green checkmark. It's ok now to close the app and to disconnect the cellphone from the pc.
7. Cellphone will boot to startup menu, you should choose "Recovery" to enter TWRP custom recovery.
When you're in recovery go to "Mount" and mount (select) following partitions: protect_f, protect_s, nvdata, System, Cache and Data.
Now it's time to perform root. Go back from "Mount" screen, tap on "Install", find and select "SuperSU_PRO_v2.76_patched_Cobra1111.zip" file and flash it.
When the flashing is done click on "delete cache and dalvik cache", and then reboot cellphone.
8. Let the cellphone boot, it should take a few minutes. When it's booted you'll see the "SuperSU" app installed on your cellphone homescreen.
You're done! Enjoy!
Note:
I've collected these files on the internet. All of credits should go to their authors, so please thank to them!
One more thing. I would advise you to perform nandroid backup of your cellphone. Go into twrp recovery and perform backup (all partitions), save it to sd card and also copy that backup to pc, just in case something goes wrong.
Bye,
cuks
@cuks [emoji482]
from my x500 on TT
tutorial - how to update youtube app
as you all know, youtube app on the Leagoo m5 is an very old version. in order to update it you need to do the following:
note: you have to have a rooted phone
1. install file manager app which can access system partition (es file explorer, root explorer, etc.)
2. start file manager, go to /system/priv-app and move the folder named "Youtube" to another directory outside /system, e.g. to /sdcard/Download
3. restart the phone
4. install the youtube app from the google play
enjoy!
cuks said:
as you all know, youtube app on the Leagoo m5 is an very old version. in order to update it you need to do the following:
Click to expand...
Click to collapse
ARGH, didn't noticed this, but really, the youtube app got frozen every time on the stock rom. That's why i changed to this Cyanogen.
That's the reason why I wrote this tutorial
What are your experiences with cm rom? Are you satisfied? Is there any bugs? What's about battety life?
cuks said:
That's the reason why I wrote this tutorial
What are your experiences with cm rom? Are you satisfied? Is there any bugs? What's about battety life?
Click to expand...
Click to collapse
Not sure about battery life sorry, i'm trying to keep it charged
But i still have problems with youtube (however i'm not an experienced user): sometimes it halts, mostly in 720p/HD videos. The picture freezes, audio is working. Sometimes the video gets zoomed to the left upper corner with a black banner in the left. This could be an app-problem though.
cuks said:
That's the reason why I wrote this tutorial
What are your experiences with cm rom? Are you satisfied? Is there any bugs? What's about battety life?
Click to expand...
Click to collapse
Oops, fingerprint sensor doesn't work with CM.
Well, that's bad.
I have thought that the cm rom has the all functionality.
Better to stay on stock rom then. Only problem with it is sending images from within whatsapp, because it works on only one awkward way.
i wrote this before, without kernel source fingerprint cant work, same problem on my Leeco Le 1s..
from my x500 on TT
I cant scan the whatsapp web QR code with stock rom... (Whith third apps i can)
Today Leagoo launched a new patch LEAGOO_M5_FreemeOS_20160728_TEST with some bug fixed.
Is there a way to un-root after fixing YouTube? MobileIron refuses to work on a rooted phone, probably because it's a security hole.
Thanks!
you can unroot directly from SuperSu apk.. try it..
from my x500 on TT
Hello guys,
i have a problem with my battery ( drain out too fast - 25% in 30 min - and charge really slow - full charge in 6h+ !!! )
I suspect that this is caused due to the official update i made but the strange thing is that my mother's m5 with the same update is ok.
Is there any " official " way to go back to the original version to check it without doing all this process you analyzed ?
Ps. I checked my apps / settings, cleared chase, made factory reset, changed charger, checked my battery with apps and is in a good condition,
so i concluded that problem has to be there. Any ideas ?
divinitygr said:
Hello guys,
i have a problem with my battery ( drain out too fast - 25% in 30 min - and charge really slow - full charge in 6h+ !!! )
I suspect that this is caused due to the official update i made but the strange thing is that my mother's m5 with the same update is ok.
Is there any " official " way to go back to the original version to check it without doing all this process you analyzed ?
Ps. I checked my apps / settings, cleared chase, made factory reset, changed charger, checked my battery with apps and is in a good condition,
so i concluded that problem has to be there. Any ideas ?
Click to expand...
Click to collapse
GPS on maybe?
from my Leagoo M5 on TT
---REBORN---
This is complete guide tour to your C9 PRO sm-c9000 only UNLOCK,TWRP,CUSTOM ROM,ROOT.
.+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+.
.+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+.
_Build on Oreo C9000ZHU1CRG9/C900FDDU1CRI7
_Root method Magisk
_Plus Xposed Great performance. i have found Very stable rom it will give you lots of battery timing 2x faster then stock i am using it right now lovinit.
Support devices: C9 PRO SM-C9000 ONLY.
On your mark GO...
Chapter 1 UNLOCK
1. DOWNLOAD+INSTALL "CROM.APK" IT WILL ALLOW BOOTLOADER TO BE UNLOCKED.
2.GOTO SETTINGS ENABLE DEVELOPER OPTIONS, AND TOGGLE OEM UNLOCK TO ON. ALSO BE SURE YOU HAVE THE SAMSUNG USB DRIVERS ON YOUR PC:
Chapter 2 TWRP Installation
1. Download the latest modified TWRP Recovery file from my section official version was not work for me & Flash with odin.
Note: make sure you flash TWRP after Clear CHAPTER 1, otherwise you will brick your devcie. & Dont worry no root required just stick to guide step by step.
Chapter 2.1 TWRP Installation error
if you stuck in TWRP installation they you need to TOGGLE OEM UNLOCK TO ON. because oreo dont have it then you need to go back to stock nougat & TOGGLE OEM UNLOCK TO ON. then repeat Chapter 2
Chapter 3 ROM Installation
1. Press Home + Power + Volume UP keys, to go to TWRP (make sure you have provided TWRP installed on your devices)
2.Full wipe (Davik + Cache + Data)
3.Go for Install ROM.
Chapter 4 ROOT Installation
Flash magisk.zip with TWRP
All Done!
......................
DOWNLOAD SECTION
CROM APK
https://drive.google.com/file/d/15YE...ew?usp=sharing
or
https://www.apkmirror.com/apk/samsun...load/download/
TWRP LINK
https://drive.google.com/file/d/1THSa4vH56-xY09VR0AXXbsiyMqJ_14lW/view?usp=sharing
ROM LINK
https://drive.google.com/file/d/1b0LRH-EzzbA2P-S3tU7eItRRkz5HOdbt/view
ROOT LINK
https://drive.google.com/file/d/11sFuMYBUVoxstTK8Ii32Cv815lnGUQ_J/view?usp=sharing
.+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+.
.+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+..+==+.
Note: If you select Magisk root not work for then install rom again & restart clear cache then flash magisk again.
NOTE
_ This is AL_IRAQI's Rom, I am just his fan who reborn this post.
TWRP Maintainer: travis82
----------------------------
Many thanks to: AL_IRAQI & travis Mills for there efforts.