Hi all,
I have a rooted system (MHA-L09C432) which I updated from version B191 to B252 (OTA).
Update worked so far but to root my device with Magisk again, I need the stock firmware for my new Version 9.1.0.252 (or at least the stock recovery).
I can't find that version via Firmware finder (only B191 is shown as latest version).
I tried MHA-LGRP2-OVS 9.1.0.252 (new firmware denotation?) but although Magisk shows root access, I can't modify any root files...
So is this the wrong version or is the problem Magisk related?
Thanks for your help in advance!
htcdesire-hd said:
Hi all,
I have a rooted system (MHA-L09C432) which I updated from version B191 to B252 (OTA).
Update worked so far but to root my device with Magisk again, I need the stock firmware for my new Version 9.1.0.252 (or at least the stock recovery).
I can't find that version via Firmware finder (only B191 is shown as latest version).
I tried MHA-LGRP2-OVS 9.1.0.252 (new firmware denotation?) but although Magisk shows root access, I can't modify any root files...
So is this the wrong version or is the problem Magisk related?
Thanks for your help in advance!
Click to expand...
Click to collapse
i too need stock C432 9.1.0.252
my is c432 9.0.1.191 no appear nothing of update Ota
install MHA-LGRP2-OVS 9.1.0.252 and brik
in easyFirmware have https://easy-firmware.com/index.php?a=downloads&b=file&id=156548
but is paid
need for unbrik
I tried the recovery_ramdis from MHA-L09B 9.1.0.252(C45E5R1P8T8) and I am still not able to modify root files. I think it's a Magisk issue...
Related
Hello: I am a newbie with a 6045I. I originally rooted my IDOL 3 under 5.0.2 using guides I found here XDA. I disabled the root in order to update to 6.0.1. Now that I have 6.0.1, how do I get root again?
Did you install the stock 6.01 update? If not, you could install TWRP and flash supersu from TWRP.
I installed the OTA version. I assume that is the stock version.
ianyhlin said:
I installed the OTA version. I assume that is the stock version.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=67644383&postcount=486
Hi,
I have a L09 B381 stock firmware installed, twrp, rooted with magisk installed. I would like to update to latest stock available, B389. HiSuite inform me about the update, but not my phone system.
Is there an easy way to update, or will I have to factory reset, update, root again, and reinstall every apps?
Alternativly, do you have a up to date custom rom to recommend?
Thanks
If you would like to update, I recommend you to go back full stock and update through dload (if updater don't work)
About custom ROMs, any ROM is stable and good.
bro just flash the firmware available in firmware finder via twrp, B398sp01 is the latest
venugopalu007 said:
bro just flash the firmware available in firmware finder via twrp, B398sp01 is the latest
Click to expand...
Click to collapse
Ok, so, I install the latest, downloaded with firmware finder, and flash it with TWRP. Will I have to reinstall all my apps? To root again?
Thanks
Don't install experimental stock rom versions.
You can update to B389 via FF with a number of options.
Whether through the proxy install or via TWRP ( with unlocked bootloader ofc) you should find guides for that in their respective threads.
As for custom roms they all randomly reboot on high accuracy gps and battery life is generally somewhat worse than on stock.
About 3-4h SoT for me but obviously that depends on your usage
Edit: You should be able to update to 389 without factory reset though, right?
Might be wrong but maybe just flash the smaller ota file or update via proxy?
Should be in the FF thread though
Sent from my HUAWEI FRD-L09 using XDA Labs
so,
I saved my stuff
flash stock firmware update with twrp, didn't worked well, only made stock recovery back, but did not update at all, so
I made a factory reset
No OTA update on my phone, only with Hisuite on my pc
Normal stock update with hisuite, really long...
finally updated to B389
TWRP 3.1.1 (openkirin honor 8 version) automatic adb install with Huawei_Multi-Tool_by_Team_MT_v7 help
flashed magisk (github.com/stangri/MagiskFiles) with twrp
reinstalling manually all my apps
seems to work well
fredfred41 said:
so,
I saved my stuff
flash stock firmware update with twrp, didn't worked well, only made stock recovery back, but did not update at all, so
I made a factory reset
No OTA update on my phone, only with Hisuite on my pc
Normal stock update with hisuite, really long...
finally updated to B389
TWRP 3.1.1 (openkirin honor 8 version) automatic adb install with Huawei_Multi-Tool_by_Team_MT_v7 help
flashed magisk (github.com/stangri/MagiskFiles) with twrp
reinstalling manually all my apps
seems to work well
Click to expand...
Click to collapse
That's great, although it's frustrating to re-install apps manually.
Enjoy
PalakMi said:
That's great, although it's frustrating to re-install apps manually.
Enjoy
Click to expand...
Click to collapse
I agree, but it's a radical way to force me to declutter my messy phone...
fredfred41 said:
I agree, but it's a radical way to force me to declutter my messy phone...
Click to expand...
Click to collapse
I'm used to it
venugopalu007 said:
bro just flash the firmware available in firmware finder via twrp, B398sp01 is the latest
Click to expand...
Click to collapse
Mm rollback is the best choice
fredfred41 said:
so,
I saved my stuff
flash stock firmware update with twrp, didn't worked well, only made stock recovery back, but did not update at all, so
I made a factory reset
No OTA update on my phone, only with Hisuite on my pc
Normal stock update with hisuite, really long...
finally updated to B389
TWRP 3.1.1 (openkirin honor 8 version) automatic adb install with Huawei_Multi-Tool_by_Team_MT_v7 help
flashed magisk (github.com/stangri/MagiskFiles) with twrp
reinstalling manually all my apps
seems to work well
Click to expand...
Click to collapse
@gopinaidu he did it already
The HFF app seems to find a new firmware for M5 8.4, I downloaded it but haven't not installed it yet, waiting for the OTA maybe it will turn up soon with the Gpu turbo update, this firmware don't have that update
omaga said:
The HFF app seems to find a new firmware for M5 8.4, I downloaded it but haven't not installed it yet, waiting for the OTA maybe it will turn up soon with the Gpu turbo update, this firmware don't have that update
Click to expand...
Click to collapse
I've been running on version 163 since last Friday (SHT-AL09). No differences between versions 151 and 163 that I have noticed other than the security update. Battery life, screen response, etc. are all about the same. My tablet is running smooth with no issues other than the well documented issues known with Huawei phones/tablets (e.g. Bluetooth and WiFi)
@Butch1326: Did you get the firmware OTA? I downloaded this firmware again and made a try to update manyally but it give me a error, tried once and give it a rest, I read the change log and thought I don't bother to even try update manually because this firmware don't include the Gpu turbo update, so I try to be patient ?and wait for the OTA update.
Edit:By the way you wrote that you have SHA-AL09 device?? Do you meen SHT-AL09?
Sorry about the typo. I meant to type SHT-AL09 as the model name of my tablet.
To install the firmware upgrade as an update (no data wipe) I followed the Tutorial 2 procedure documented from the site below. It worked like a charm.
https://forum.xda-developers.com/p10/how-to/guide-manual-updgrade-to-update-oreo-t3758286
I downloaded the Full version of the SHT-AL09C432B163 (8.0.0.163) firmware since it was the only variant available at the time from the Huawei firmware download site. If you decide to use the OTA version instead which is now available for download please note the public ZIP file name is different in the OTA ZIP file download than the ZIP file name found in the Full version of the update.
The only change I made was to update the filename for one of the firmware ZIP files from update_SHT-AL09_hw_eu.zip to update_full_hw.zip.
I downloaded and extracted the RAR file mentioned in the procedure and included the three (3) firmware update ZIP files in the oreoupdate folder as instructed, copied the oreoupdate folder and its contents to the tablet, renamed the update_SHT-AL09_hw_eu.zip to update_full_hw.zip, and let the TWRP install do the rest. This procedure will install the stock recovery. You will need to rerun the magisk root and TWRP procedures.
For Magisk I used this patched_ramdisk procedure found below:
https://forum.xda-developers.com/mediapad-m5/how-to/root-root-guide-huawei-mediapad-m5-t3786157
and this procedure to install TWRP
https://forum.xda-developers.com/mediapad-m5/development/recovery-twrp-3-2-2-1-t3813825
-----
Mine updated OTA this evening to 163.
Great news, hope to get mine very soon , if not I do it manually
I got my. 163 OTA this morning
Butch1326 said:
Sorry about the typo. I meant to type SHT-AL09 as the model name of my tablet.
To install the firmware upgrade as an update (no data wipe) I followed the Tutorial 2 procedure documented from the site below. It worked like a charm.
https://forum.xda-developers.com/p10/how-to/guide-manual-updgrade-to-update-oreo-t3758286
I downloaded the Full version of the SHT-AL09C432B163 (8.0.0.163) firmware since it was the only variant available at the time from the Huawei firmware download site. If you decide to use the OTA version instead which is now available for download please note the public ZIP file name is different in the OTA ZIP file download than the ZIP file name found in the Full version of the update.
The only change I made was to update the filename for one of the firmware ZIP files from update_SHT-AL09_hw_eu.zip to update_full_hw.zip.
I downloaded and extracted the RAR file mentioned in the procedure and included the three (3) firmware update ZIP files in the oreoupdate folder as instructed, copied the oreoupdate folder and its contents to the tablet, renamed the update_SHT-AL09_hw_eu.zip to update_full_hw.zip, and let the TWRP install do the rest. This procedure will install the stock recovery. You will need to rerun the magisk root and TWRP procedures.
For Magisk I used this patched_ramdisk procedure found below:
https://forum.xda-developers.com/mediapad-m5/how-to/root-root-guide-huawei-mediapad-m5-t3786157
and this procedure to install TWRP
https://forum.xda-developers.com/mediapad-m5/development/recovery-twrp-3-2-2-1-t3813825
Click to expand...
Click to collapse
Thanks to this, i finally was able to install a official firmware (8.0.0.161) on my CMR-AL09C432.
I flashed a Chinese Firmware like a month ago (yes, me stupid...) and could recover from it by buying a Bootloader unlock and flashing 8.0.0.151.
It worked again but it felt buggy and clunky. Also i didnt got this OTA (161). Now i used you methode and got a full clean and fresh installed 161.
Thanks a lot!
New firmware 8.0.0.172 on HFF for SHT-AL09, no Gpu turbo yet, only Google security patch
I upgraded the firmware on my M5 SHT-AL09 from 163 to 172 using the same procedure as I previously outlined in post #4. I found out that this procedure only works with the full version of the firmware. I first tried running the OTA version. It failed at about 15% of the way through the install.
The only issue I am still investigating is the Magisk SafetyNet check. Granting apps root privilege is fine but the SafefyNet check is failing. I tried both versions 16.0 and 16.7. Other than that everything seems fine so far. I will post when I have any updates.
Hey,
somehow my phone ( FRD-L09C636 ) doesn´t want to update by it self. So i tried to update it with the dload methode.
After going in the "secret menu" and try to install it from my sd card it stops after 5% and says:
Software install failed! Incompatibility with current version. Please download the correct update package
Click to expand...
Click to collapse
Don´t work with the other methode ( rebooting phone and press vol up, down and power button ) either.
Tried to update from C636B130 to C636B360 and C636B389.
Downloaded both firmwares from Firmware Finder on my PC.
Hope you guys can help ^^.
Hello, did you try to update your phone via HiSuite software (computer)?
And for Firmware Finder firmwares, did you check if you can install them? (Check firmware access)
Going from B130 (Android 6.0) to B3xx (Android 7.0) firmware requires to flash FullOTA firmware.
Micdu70 said:
Hello, did you try to update your phone via HiSuite software (computer)?
And for Firmware Finder firmwares, did you check if you can install them? (Check firmware access)
Going from B130 (Android 6.0) to B3xx (Android 7.0) firmware requires to flash FullOTA firmware.
Click to expand...
Click to collapse
Yes, already tried with HISuite .. it says my phone is up to date.
I´ve also checked, if the update is available for my phone. It´s alright.
So I need to flash it with ADB, like TWRP?
Greetings UStone
You don't need to use custom Recovery like TWRP to flash "FullOTA" firmware (approved for installation, of course). Use "dload" folder method to flash "UPDATE.APP" file from .zip files in this order (advised):
1) update.zip
2) update_full_xxxx_yyyy.zip ("xxxx" and "yyyy" = depending from hardware model/region)
3) update_data_full_public.zip
But you can use TWRP to flash a "FullOTA-PV" firmware (if available...) or use a recent method to flash any "FullOTA" firmware using TWRP (CAUTION!): HuRUpdater
Hi,
I am having the same issue as the OP.
I have and Honor 8 indian version (FRD-L02C675) and currently am in the B160. I'm trying to upgrade to the FRD-L02C675B330CUSTC675D003, and I have downloaded the FullOTA-MF from firmware finder, version 8757 and 87830, and used the dload method. For both versions I have the same message:
Software install failed! Incompatibility with current version. Please download the correct update package.
HISuite says my phone is up to date, the same as system update on the phone.
I've also checked if the update is available for my phone, and it is.
I am from Ecuador using a indian version, so I'm not going to be able to update OTA officially.
I appreciate all the help you can give me.
Hi,
I can’t seem to find a post about an S10e. My apologies if one already exists.
I have a g970F with unlocked bootloader, stock rom and magisk installed. Can I now update as I am having trouble installing unsigned apks over the top of original apks.
Thanks.
Hello, once the original firmware is altered, you cannot install OTA updates, only through Odin.
themohd said:
Hello, once the original firmware is altered, you cannot install OTA updates, only through Odin.
Click to expand...
Click to collapse
Many thanks for the advice. I will attempt to locate an updated ASBA version as I’m currently using a security patch from February.