Database Info

NEW firmware 1.54.401.4 (OTA) radio7.51.50.25

Hi
I won share with new OTA update for Europe version. Maybe somebody will use it.
its Android 2.3.5 with radio 7.51.50.25
If you download it, inside there is file: "firmware.zip", with have:
New radio.img (7.51.50.25)
You can download it from link:
www . mediafire . com/?otzt1e4b7rxf5r4"]OTA_Chacha_HTC_Europe_1.54.401.4-1.54.401.3_release_292304mj6944pprs3k15ei.zip
This is for:
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__102
cidnum: HTC__203
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__032
cidnum: HTC__016
cidnum: HTC__N34

error 7
i am getting an error while flashing...

lolmop said:
i am getting an error while flashing...
Click to expand...
Click to collapse
wat is Your CID? (you can check it by instaling "CIDGetter"
What is your software wersion?
How do you apply update?

error 7
CID: HTC_203
Software: hexgore stock rom (android 2.3.5)
how i applied update? i copied the .zip to my sdcard and flashed it through CMW... getting 'error 7'

Hello. If this is a OTA, it's not the same as a complete ROM, isn't it??
I mean:
OTA: Over The Air update, relies on existing files to add, delete or patch them, so if any of them is missing, then it cannot be completed. It's used normally to update the existing software between minor versions.
Complete ROM: It's the full software, the complete files collection. It's how you can go back to stock rom, or install a recovery or a upgrade (GB -> ICS) provided by the manufacturer or the carrier.
So, when you try to apply an OTA update, is expected you to be using the very stock rom that came with the mobile, or at least a full rom from another carrier, or the manufacturer itself.
In a word: If you are trying to aply an OTA over hexgore stock rom, it should not to work.

So any news about dialer?

Can't flash JB roms on HTC One S C2

First of, a bunch of thanks to you for helping me get from a complete and utter noob to a just complete noob. Managed to root, install roms and get out of a LOT of soft bricks (i just don't give up!) with your awesome help, all by searching older posts. However, this time i find myself in a pickle.
I own an HTC One S C2 with Hboot 2.0.9, had stock ICS when i bought it with no option to update to JB (which is why i rooted it in the first place). Something about this particular version of the phone not being updated by HTC global, which i found out about after i bought it, duh. Anyway. I've tried installing JB roms from this thread http://forum.xda-developers.com/showthread.php?t=2239265 with no luck. Phone just keeps getting into HTC logo screen loops. Right now i am on backtobasics v3 rom. Here's how i tried installing them JB roms and also the rom i am using right now (using TWRP 2.4.1 because newest version wouldn't work with backtobasics rom):
(note: some roms had sliiiightly different directions, i just followed each and every one's description closely)
1) Download Rom.zip
2) Extract boot.img from Rom.zip to fastboot folder
3) Enter Recovery
4) Mount SD card
5) Copy Rom.zip to SD card
6) Unmount
7) Wipe data, system, cache, dalvik cache and factory reset
8) Install Rom.zip
9) Reboot Bootloader
10) Go to fastboot USB mode
11) dem commands: fastboot flash boot boot.img then fastboot erase cache then fastboot reboot
12) BOOM! HTC LOGO LOOPS!
I've also tried installing a RUU but i couldn't find any for my CID. Then i thought about getting a SuperCID but, frankly, i scrached that thought the minute i saw the how to do it thread. Here's the phone info
version-bootloader: 2.09.0001
version-baseband: 16.05.20.24_M
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: FA335W400602
imei: 352911052281278
product: villec2
platform: HBOOT-8260
modelid: PJ4021000
cidnum: BSTAR301
battery-status: good
battery-voltage: 4170mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: f616909f
hbootpreupdate: 11
gencheckpt: 0
Thank you, in advance, for any advice you may be able to provide me with

Mkay, since i got no answer i went back to searching again! Unfortunately, i still have no asolution to my problem
From what i understand i have to: find a RUU to get from android version 4.0.3 up to JB version. Then i will be able to flash JB roms. But there is no RUU for CID BSTAR301.
I did find a thread with nandroid backup for a BSTAR301 which updates the version without a RUU but it was for HTC One X, i guess i shouldn't use that at all.
I am thinking about doing a SuperCID to install a RUU, then get back to my actual CID and flash a custom JB rom..
Would appreciate any advice

Tateh said:
Mkay, since i got no answer i went back to searching again! Unfortunately, i still have no asolution to my problem
From what i understand i have to: find a RUU to get from android version 4.0.3 up to JB version. Then i will be able to flash JB roms. But there is no RUU for CID BSTAR301.
I did find a thread with nandroid backup for a BSTAR301 which updates the version without a RUU but it was for HTC One X, i guess i shouldn't use that at all.
I am thinking about doing a SuperCID to install a RUU, then get back to my actual CID and flash a custom JB rom..
Would appreciate any advice
Click to expand...
Click to collapse
Yes, in your case S-OFF, Changing CID to something which has a JB RUU would do the trick. I think SuperCID is not necessary.
Sent from my Nexus 7 using Tapatalk HD

heakit Purpose
khan.orak said:
Yes, in your case S-OFF, Changing CID to something which has a JB RUU would do the trick. I think SuperCID is not necessary.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
THANK you! Currently trying to S-OFF it!

Tateh said:
THANK you! Currently trying to S-OFF it!
Click to expand...
Click to collapse
did you get S-OFF?

Not yet.. So exhausted. I tried the moonshine method but, just like trhe instructions state, i should have JB and be on stock for it to work properly, which is not possible since my phone has a BSTAR301 CID and is stuck on 4.0.3 with no stock roms available.
From what i've read, my only hope of S-OFF is to wait for the fellas working on Revolutionary method for S-OFF to release the correct version for this phone. I just hope it's soon and I thank them for their efforts, i'm so disappointed at this phone

Tateh said:
Not yet.. So exhausted. I tried the moonshine method but, just like trhe instructions state, i should have JB and be on stock for it to work properly, which is not possible since my phone has a BSTAR301 CID and is stuck on 4.0.3 with no stock roms available.
From what i've read, my only hope of S-OFF is to wait for the fellas working on Revolutionary method for S-OFF to release the correct version for this phone. I just hope it's soon and I thank them for their efforts, i'm so disappointed at this phone
Click to expand...
Click to collapse
same here. I just wrote to them asking for that

S-OFF done
I did S-OFF already. Now i need to know what CID put in my phone?? and which RUU install on it??
My MID is: PJ4021000
so i don't know if the Europe RUU's work in my phone. Maybe the radio have problem or no?? because the RUU say MID version: PJ4020000. Someone knows about this??

I have heard that JB update for BSTAR is now available.
Sent from my HTC One S using Tapatalk 4 Beta

khan.orak said:
I have heard that JB update for BSTAR is now available.
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yeah it's done. But I would change CID not have to wait for another update Brightstar in so long.

gustavoegg said:
Yeah it's done. But I would change CID not have to wait for another update Brightstar in so long.
Click to expand...
Click to collapse
Be sure to match MID or you'll end up having problems with future updates.
Sent from my HTC One S using Tapatalk 4 Beta

Episcopal yupdfir
khan.orak said:
Be sure to match MID or you'll end up having problems with future updates.
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
Where i can find a RUU for Model ID: PJ4021000?? Because i need update for OTA after install the RUU

gustavoegg said:
Where i can find a RUU for Model ID: PJ4021000?? Because i need update for OTA after install the RUU
Click to expand...
Click to collapse
You have to manually check the ANDROID-INFO.TXT to match CID + MID
Sent from my HTC One S using Tapatalk 4 Beta

Tateh said:
First of, a bunch of thanks to you for helping me get from a complete and utter noob to a just complete noob. Managed to root, install roms and get out of a LOT of soft bricks (i just don't give up!) with your awesome help, all by searching older posts. However, this time i find myself in a pickle.
I own an HTC One S C2 with Hboot 2.0.9, had stock ICS when i bought it with no option to update to JB (which is why i rooted it in the first place). Something about this particular version of the phone not being updated by HTC global, which i found out about after i bought it, duh. Anyway. I've tried installing JB roms from this thread http://forum.xda-developers.com/showthread.php?t=2239265 with no luck. Phone just keeps getting into HTC logo screen loops. Right now i am on backtobasics v3 rom. Here's how i tried installing them JB roms and also the rom i am using right now (using TWRP 2.4.1 because newest version wouldn't work with backtobasics rom):
(note: some roms had sliiiightly different directions, i just followed each and every one's description closely)
1) Download Rom.zip
2) Extract boot.img from Rom.zip to fastboot folder
3) Enter Recovery
4) Mount SD card
5) Copy Rom.zip to SD card
6) Unmount
7) Wipe data, system, cache, dalvik cache and factory reset
8) Install Rom.zip
9) Reboot Bootloader
10) Go to fastboot USB mode
11) dem commands: fastboot flash boot boot.img then fastboot erase cache then fastboot reboot
12) BOOM! HTC LOGO LOOPS!
I've also tried installing a RUU but i couldn't find any for my CID. Then i thought about getting a SuperCID but, frankly, i scrached that thought the minute i saw the how to do it thread. Here's the phone info
version-bootloader: 2.09.0001
version-baseband: 16.05.20.24_M
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: FA335W400602
imei: 352911052281278
product: villec2
platform: HBOOT-8260
modelid: PJ4021000
cidnum: BSTAR301
battery-status: good
battery-voltage: 4170mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: f616909f
hbootpreupdate: 11
gencheckpt: 0
Thank you, in advance, for any advice you may be able to provide me with
Click to expand...
Click to collapse
Hi, I have same problem with you. Have you got any solution?

Unfortunately not yet, I switched back to my old xperia ray while i wait for the revolutionary team to release a version for HTC One S

[Q] Stuck at HTC logo after failed stock update

Heyy, so i was wondering if yous could help me. I have a stock HTC Sensation EU, t-mobile version, which I had updated to the latest version (4.0.3 I think). During the upgrade-process something went wrong and now it doesn't go past the HTC logo. S-ON. When in Hboot it shows no found something.img. What is the way to fix this?
If possible I'd like to root it as well and use the Cyanogenmod.

HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development

blogodoblogodo said:
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
Click to expand...
Click to collapse
Seems good, i´ll try it out

blogodoblogodo said:
HI, is it possible to you to go In Recovery Mod or Fastboot???
If it's yes,
Go here :
[GUIDE][N00b] Flash a ROM from 100% Stock!
This is a guide that give u all the way to unlock ur bootloader, change your stock recovery with a custom one (4ext).
Then u'll be able to install a ROM custom.
Here u can found a lot of ROM Developped for HTC SENSATION.
Sensation Android Development
Click to expand...
Click to collapse
So it worked, but it didn't. I managed to install a custom rom, but after 10 seconds (if it even was that much), the system crashes and reboots, only to do the same thing again.
I used a RUU as well but I got a signing error (132) when using the RUU. I then tried installing the RUU through fastboot and I got further. I did however got the error saying the CID wasn't matching. In the .txt file from the zip I had added my CID, So I thought it had to work.
There is no official rom for my cid (T-MOB003) unfortunately.
This is starting to give me a headache

Search for this HERE

blogodoblogodo said:
Search for this HERE
Click to expand...
Click to collapse
Well DEFINITELY not there.
Those are Sensation XL.
Here's for our Sensation http://forum.xda-developers.com/showthread.php?t=1672425

Hoooooooo, Nooo,
Sorry ,really sorry
I googled "T-MOB003 for SENSATION"
Sorry DrNickjen
Thank You Nicx59

Nicx59 said:
Well DEFINITELY not there.
Those are Sensation XL.
Here's for our Sensation http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
I have read that once, but I'll do it again; this time more thorougly.
The RUU I'm trying to install is RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_Radio_11.69.3504.00U_11.22.3504.07_M_release_246089_signed
fastboot getvar all returns
Code:
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.18.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.50.114.2
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: T-MOB003
(bootloader) battery-status: good
(bootloader) battery-voltage: 4104mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9d24123f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Since my cidnum is not in the RUU, (and there isn't a RUU for my cid) I'll have to add it according to the guide. I'll get to that later. hboot version to install and version-main are both higher than currently installed, so that shouldn't be an issue.
My phone is S-ON, but unlocked so I'll have to relock it again. Followed instructions and device is *** RELOCKED ***. Displays, however, a security warning. I'll now proceed with the installation by executing the exe. If I'm right I should see an error.
Error: Customer ID incorrect, as expected. I'll now try to install manually.
Since my CID is different I'll change it in the .zip. 7z didn't allow me to change it in the archive itself so I've extracted the archive, changed android-info.txt to:
Code:
modelid: PG5813000
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__N34
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__016
cidnum: T-MOB003
mainver: 3.32.401.5
hbootpreupdate:12
DelCache:1
Note: When pasting this my CID was placed on the same line as mainver. Inserted an enter and repasted in android-info.txt.
What I did as well was unlock the bootloader again, changed recovery to the file inside the rom.zip, and relocked the bootloader. I read this was a fix for the problem.
THIS POST IS IN PROGRESS

HI its not necessary to show ure imei, plz, edit your post and Erase it.

blogodoblogodo said:
HI its not necessary to show ure imei, plz, edit your post and Erase it.
Click to expand...
Click to collapse
Thanks.

Just Hit ThAnks Button
So For you, is it good???

blogodoblogodo said:
Just Hit ThAnks Button
So For you, is it good???
Click to expand...
Click to collapse
Nope. I gave up fot the day because I couldn't het the PG58IMG flashed. It didn't have an effect in hboot so I tried using fastboot but i got an unknown error. The tries installing ViperS 2.0, which succeeded. On boot, however, the system crashed and rebooted automatically, just like the other rom's i've tried.
If only I could get a rom working...

DrNickjen said:
Nope. I gave up fot the day because I couldn't het the PG58IMG flashed. It didn't have an effect in hboot so I tried using fastboot but i got an unknown error. The tries installing ViperS 2.0, which succeeded. On boot, however, the system crashed and rebooted automatically, just like the other rom's i've tried.
If only I could get a rom working...
Click to expand...
Click to collapse
actually if you are still on gingerbread firmware you can't boot any ics or jb rom
flash this rom from recovery
http://d-h.st/bqL
if you still want to upgrade to ics then S-OFF the device from here
http://revolutionary.io/
after that flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
then flash any ics or jb rom from recovery

rzr86 said:
actually if you are still on gingerbread firmware you can't boot any ics or jb rom
flash this rom from recovery
http://d-h.st/bqL
if you still want to upgrade to ics then S-OFF the device from here
http://revolutionary.io/
after that flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
then flash any ics or jb rom from recovery
Click to expand...
Click to collapse
Flashed it using Cwm, first did a full wipe and it installed fine. It then booted en got to a black screen and rebooted. Wiping Dalvik cache + /cache didn't work as a solution.
Same thing as any other .zip I've installed through recovery.

DrNickjen said:
Flashed it using Cwm, first did a full wipe and it installed fine. It then booted en got to a black screen and rebooted. Wiping Dalvik cache + /cache didn't work as a solution.
Same thing as any other .zip I've installed through recovery.
Click to expand...
Click to collapse
can you post your bootloader details again and what rom did you try to flash now?
also did you try to follow the steps i gave you?

rzr86 said:
can you post your bootloader details again and what rom did you try to flash now?
also did you try to follow the steps i gave you?
Click to expand...
Click to collapse
UNLOCKED
Pyramid PVT SHIP S-ON RL
HBOOT-1.18.000
eMMC-boot
August 2nd 2011
Tried to flash the rom you linked to and yes I have.

DrNickjen said:
UNLOCKED
Pyramid PVT SHIP S-ON RL
HBOOT-1.18.000
eMMC-boot
August 2nd 2011
Tried to flash the rom you linked to and yes I have.
Click to expand...
Click to collapse
change the recovery to 4ext
before flash the rom enable smartflash from 4ext

rzr86 said:
change the recovery to 4ext
before flash the rom enable smartflash from 4ext
Click to expand...
Click to collapse
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?

DrNickjen said:
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
Click to expand...
Click to collapse
First make a full backup of your device through 4ext.
Then just flash the zips from one of the following releases:
android1234567's release (here you have to flash rom and kernel seperately)
albinoman887's releease
And last flash gapps from here

DrNickjen said:
I love you omg it worked <3 <3
So, what do I have to do in order to get e.g. Cyanogenmod running?
Click to expand...
Click to collapse
see my previous post of what to do now
S-OFF
flash 3.33 universal(check md5 sums before flashing)
flash cyanogenmod rom
done
note:when you achieve S-OFF you won't need anymore the smartflash feature

[Help] need backup or boot.img for sensation

Hello,
I'm looking for sensation's backup or boot.img for mainver 3.33.707.51 and HTC__044 CID
Urgently !
Thank's

octopus82 said:
Hello,
I'm looking for sensation's backup or boot.img for mainver 3.33.707.51 and HTC__044 CID
Urgently !
Thank's
Click to expand...
Click to collapse
what did you do exactly?
post also your bootloader info pls

rzr86 said:
what did you do exactly?
post also your bootloader info pls
Click to expand...
Click to collapse
I've flashed another boot.img, for old version then I have error wifi
and I think that the device run with an custom rom with s-on
bootloader 1.27
Thank's

octopus82 said:
I've flashed another boot.img, for old version then I have error wifi
and I think that the device run with an custom rom with s-on
bootloader 1.27
Thank's
Click to expand...
Click to collapse
just download the rom you have
extract the boot.img and flash it via fastboot command

rzr86 said:
just download the rom you have
extract the boot.img and flash it via fastboot command
Click to expand...
Click to collapse
I CAN'T FIND MY VERSION DUDE
so I hope if some one have it or can make an backup to help me
Thank's

octopus82 said:
I CAN'T FIND MY VERSION DUDE
so I hope if some one have it or can make an backup to help me
Thank's
Click to expand...
Click to collapse
actually mate we have to know what rom you have
the only thing i can tell you now is to flash a custom rom from recovery
edit: go to phone info
maybe it is says something there

rzr86 said:
actually mate we have to know what rom you have
the only thing i can tell you now is to flash a custom rom from recovery
edit: go to phone info
maybe it is says something there
Click to expand...
Click to collapse
I'm on s-on and I can't go on s-off, I have error issu everytime with JB method
another solution please ?

octopus82 said:
I'm on s-on and I can't go on s-off, I have error issu everytime with JB method
another solution please ?
Click to expand...
Click to collapse
you confused me now
do you have wifi error or are you trying to S-OFF?
if you have trouble with jb method say what error you have

rzr86 said:
you confused me now
do you have wifi error or are you trying to S-OFF?
if you have trouble with jb method say what error you have
Click to expand...
Click to collapse
I have wifi error, et and I'm trying to s-off to change cid cause I can't find my mainver rom
version: 0.5
version-bootloader: 1.27.0000
version-baseband: 11.24A.3504.31_M
version-cpld: None
version-microp: None
version-main: 3.33.707.51
serialno: ###############
imei: ################
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: HTC__044
battery-status: good
battery-voltage: 4148mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11

octopus82 said:
I have wifi error, et and I'm trying to s-off to change cid cause I can't find my mainver rom
version: 0.5
version-bootloader: 1.27.0000
version-baseband: 11.24A.3504.31_M
version-cpld: None
version-microp: None
version-main: 3.33.707.51
serialno: ###############
imei: ################
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: HTC__044
battery-status: good
battery-voltage: 4148mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11
Click to expand...
Click to collapse
ok then in order to S-OFF you must have stock rom in your device
you can use the flashable zip(link in my signature)
otherwise you can use the appropriate ruu.exe for your device
see this thread
http://forum.xda-developers.com/showthread.php?t=1672425
relock first the bootloader(if it is unlocked)

rzr86 said:
ok then in order to S-OFF you must have stock rom in your device
you can use the flashable zip(link in my signature)
)
Click to expand...
Click to collapse
flashble with s-on ?!

rzr86 said:
if you have trouble with jb method say what error you have
Click to expand...
Click to collapse
S-OFF Failed
Errorcode: 66732337
ErrorMsg: Still sober
when I do a wire strike the sd card not working after that

I've found this in htcdev/download
http://dl4.htc.com/RomCode/Source_and_Binaries/pyramid-ics-crc-3.0.16-8626210.zip
it's a file for mu mainver
I've flashed it with PG58IMG.zip from bootloader with sd card, but still wifi error
Can somebody tell if I can excrat an firmware.zip from this file ?
Thank's

octopus82 said:
flashble with s-on ?!
Click to expand...
Click to collapse
yes you can
just put it in your sdcard
boot your device into recovery(i suggest to install 4ext recovery if you don't have it already)
format all partitions from except sdcard from 4ext
enable smartflash from 4ext(because you are on S-ON)
flash the rom
octopus82 said:
S-OFF Failed
Errorcode: 66732337
ErrorMsg: Still sober
when I do a wire strike the sd card not working after that
Click to expand...
Click to collapse
format your sdcard or try with a different one
octopus82 said:
I've found this in htcdev/download
http://dl4.htc.com/RomCode/Source_and_Binaries/pyramid-ics-crc-3.0.16-8626210.zip
it's a file for mu mainver
I've flashed it with PG58IMG.zip from bootloader with sd card, but still wifi error
Can somebody tell if I can excrat an firmware.zip from this file ?
Thank's
Click to expand...
Click to collapse
you can't flash firmware while on S-ON
did you try to use any ruu.exe?

rzr86 said:
yes you can
just put it in your sdcard
boot your device into recovery(i suggest to install 4ext recovery if you don't have it already)
format all partitions from except sdcard from 4ext
enable smartflash from 4ext(because you are on S-ON)
flash the rom
format your sdcard or try with a different one
you can't flash firmware while on S-ON
did you try to use any ruu.exe?
Click to expand...
Click to collapse
Thank you very very much dude, I'll never forget your help
The problem is solved

octopus82 said:
Thank you very very much dude, I'll never forget your help
The problem is solved
Click to expand...
Click to collapse
wifi is working mate?

rzr86 said:
wifi is working mate?
Click to expand...
Click to collapse
evreything work perfectly
Thank's

[Resolved] Problems updating X920d Android 4.3 version 3.15.707.4 from 2.33.707.3

Resolved!
Apparently it was due to the fact that I installed Xposed Framework that causes the update process to fail.
I try to manually update the OTA.zip via stock recovery and found out that the process stopped at
"assert failed apply_patch_check( /system/bin/app_process."
Click to expand...
Click to collapse
Further checks showed that Xposed replaced the app_process file and causes it to fail checksum. I then copied /system/bin/app_process.orig back to /system/bin/app_process.
After that, the update was a breeze. The recovery used was from 3.15.707.4 (extracted from OTA.zip).
I've also S-OFF and Super-CID during my testing process.
If your update process stops after 25%, usually some checksum error has happened. Use manual update to determine the error message.
________________________________________________________________________
I'm having a problem updating my Butterfly to Android 4.3 from 4.2.2
My current firmware is 2.33.707.3 and the upgrade version is 3.15.707.4.
On my current phone, I have unlock my bootloader, flash recovery to TWRP 2.6.3.0 as well as rooted it. Due to inexperience, I did not backup my original recovery.
As per gleamed from this forum, I've tried to flash recovery from other stock ROM to proceed with the OTA update.
Steps taken:
Clicked Install now on the OTA message
Phone reboots to recovery
Phone icon with Green exclamation mark appears
Bottom part blue progress bar appears
Upon 30 to 40% progress, the screen changes to Red exclamation mark and update is stopped.
Edit: Did a Factory reset, problem remains.
I've tried the following recovery from other stock ROM without success.
Recovery from 3.15.707.4 (extracted OTA zip in phone's Download folder)
Recovery from 1.19.707.1 (extracted from DLXB1_U_JB_45_hTC_Asia_WWE_1.19.707.1_V0.0)
Recovery from 2.28.709.2 (extracted from OTA_DLXB1_U_JB_50_S_hTC_Asia_TW_2.28.709.2-1.18.709.3)
Recovery from 1.12.707.1
Recovery from 2.33 (from @Bassie39's OTA collection)
Recovery from 2.28.709.3
I've searched high and low for stock Recovery from 2.33.707.3 but unable to locate it.
Any tips or suggestion apart from S-OFF and update firmware, PL99img.zip update via bootloader, look in the OTA collection?
Code:
Model: Butterfly x920d
Android Version: 4.2.2
HTC Sense: 5.0
Software number: 2.33.707.3
CID: 044
[I][B]Bootloader Menu[/B][/I]
*** TAMPERED ***
*** UNLOCKED ***
DELUXE_UB1 PVT SHIP [B]S-ON[/B] RH
[B]HBOOT-1.54.0000[/B]
RADIO-3A.28.306.09
OpenDSP-V10.120.274.0520
[B]OS-2.33.707.3[/B]
eMMC-boot 2048MB
Aug 16 2013
[B][I]Fastboot getvar all results[/I][/B]
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 3A.28.306.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.33.707.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: x
(bootloader) imei: x
(bootloader) meid: x
(bootloader) product: deluxe_ub1
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PL9911000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3856mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0c6295fdaf
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
A list of posts with the same problem:
[Q] Help In Updating To 4.3 - Unsolved
Followed @bluheart suggestion - Not working

Try this buddy
Do everything as written.

bluheart said:
Try this buddy
Do everything as written.
Click to expand...
Click to collapse
@bluheart, How do I go from S-OFF to update my OTA? Is Rumrunner better?

Any help or advice would be very appreciated.
Sent from my HTC Butterfly using Tapatalk

Firewater or Rumrunner are equally effective.
I liked Firewater as its very simple to use.

What's the next step after having S-Off?
Sent from my HTC Butterfly using Tapatalk

kemikelx said:
What's the next step after having S-Off?
Sent from my HTC Butterfly using Tapatalk
Click to expand...
Click to collapse
Super cid
Sent from my HTC Butterfly s using XDA Premium 4 mobile app

After supercid flash the TW (Taiwan) firmware not the WWE (World Wide Edition) so that you get faster updates as this is a Taiwanese company. WWE gets updates a lot later (2-4 months later) so think about that.

abhinav.tella said:
After supercid flash the TW (Taiwan) firmware not the WWE (World Wide Edition) so that you get faster updates as this is a Taiwanese company. WWE gets updates a lot later (2-4 months later) so think about that.
Click to expand...
Click to collapse
Yes, This means I have to change the CID to HTC__621? But would this affect my Carrier settings?

kemikelx said:
Yes, This means I have to change the CID to HTC__621? But would this affect my Carrier settings?
Click to expand...
Click to collapse
No, I have done this with my old Butterfly without any bad effects or signal problems.

bluheart said:
Firewater or Rumrunner are equally effective.
I liked Firewater as its very simple to use.
Click to expand...
Click to collapse
Firewater didn't work. Instead I used Rumrunner.

Hope things worked out, and also I hope you took my advice and switched to Taiwan RUU.
You don't have to change CID if you are supercid which is 11111 something like that, you can install any RUU.
Sent from my LG-LS980 using XDA Premium 4 mobile app

abhinav.tella said:
Hope things worked out, and also I hope you took my advice and switched to Taiwan RUU.
You don't have to change CID if you are supercid which is 11111 something like that, you can install any RUU.
Sent from my LG-LS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm trying to find a way to install the Taiwanese RUU on my phone. Looking around this forum but some of the instructions are contradictory.
Any help or useful links to share?

kemikelx said:
I'm trying to find a way to install the Taiwanese RUU on my phone. Looking around this forum but some of the instructions are contradictory.
Any help or useful links to share?
Click to expand...
Click to collapse
Go to the unlock thread page 9, I posted a detailed S-Off procedure. Any further questions regarding TW firmware they can answer.