It is charging but not connecting to the car, means android auto is not launching one the device or the HMI.
I am on official rom.
Anyone having a solution? With my Samsung S8 it's working.
Thanks
Have you Android Auto unit update to latest firmware?
Yes. Think so
Zurko said:
Yes. Think so
Click to expand...
Click to collapse
No, not your phone, the firmware on the car head unit.
Try different cables. Seems to always fix for me.
One thing I noticed influences - do you have ADB debugging enabled? If you do, try to disable it.
Found the solution. Was a problem in the mmi settings. Now working!
Thanks all
Zurko said:
Found the solution. Was a problem in the mmi settings. Now working!
Thanks all
Click to expand...
Click to collapse
Nice! I had the same issue actually.
Audi A4 2018 as well.
@Zurko
I have same problem. Which settings did you change?
tomambus said:
@Zurko
I have same problem. Which settings did you change?
Click to expand...
Click to collapse
I will check later and let you know.
Zurko said:
I will check later and let you know.
Click to expand...
Click to collapse
Great, thanks!
Here you are
Related
yesterday,I was flashing firmware on my mtk GV08s smartwatch and somehow my camera and bluetooth got bricked.
The camera won't open,Instead it'll just make the watch crash or go into safe mode.The same goes for the bluetooth.The device I want to connect to it isn't able to connect to it.BT dailer crashes if I try to connect someone via bluetooth.Everything else works fine.Please help.
Rishan00 said:
yesterday,I was flashing firmware on my mtk GV08s smartwatch and somehow my camera and bluetooth got bricked.
The camera won't open,Instead it'll just make the watch crash or go into safe mode.The same goes for the bluetooth.The device I want to connect to it isn't able to connect to it.BT dailer crashes if I try to connect someone via bluetooth.Everything else works fine.Please help.
Click to expand...
Click to collapse
You flashed an incorrectly ported version of the rom. Flashing the stock rom should solve the issue.
janekmuric said:
You flashed an incorrectly ported version of the rom. Flashing the stock rom should solve the issue.
Click to expand...
Click to collapse
How do I find the stock rom?
Rishan00 said:
How do I find the stock rom?
Click to expand...
Click to collapse
Google GV08s smartwatch stock rom.
I tried to google that but I didn't find any roms at all.
janekmuric said:
Google GV08s smartwatch stock rom.
I tried to google that but I didn't find any roms at all.
Click to expand...
Click to collapse
then it seems that all hope is lost........at least you tried to help me thanks for that.
Rishan00 said:
then it seems that all hope is lost........at least you tried to help me thanks for that.
Click to expand...
Click to collapse
Hope dies last! Where did you find the firmware you flashed? Do you have any backups? If you or your friend has the same watch model you could JTAG
janekmuric said:
Hope dies last! Where did you find the firmware you flashed? Do you have any backups? If you or your friend has the same watch model you could JTAG
Click to expand...
Click to collapse
I got it from here- https://drive.google.com/folderview...&usp=sharing&tid=0B_hRh3DjuBoeblBsakZfUWFCeGM
I used the gv08 from carlspaco mod-2 and the langb file from x9PCB01_gprs x9 gv08 for registering the IMEI number through sn writer.
Rishan00 said:
I got it from here- https://drive.google.com/folderview...&usp=sharing&tid=0B_hRh3DjuBoeblBsakZfUWFCeGM
I used the gv08 from carlspaco mod-2 and the langb file from x9PCB01_gprs x9 gv08 for registering the IMEI number though sn writer.
Click to expand...
Click to collapse
There are many firmware versions here. Try them out.
janekmuric said:
Hope dies last! Where did you find the firmware you flashed? Do you have any backups? If you or your friend has the same watch model you could JTAG
Click to expand...
Click to collapse
I tried them all,they either turn my screen upside down or just give error message for the camera.only carlspaco mod 2 fits in with my watch.
Rishan00 said:
I tried them all,they either turn my screen upside down or just give error message for the camera.only carlspaco mod 2 fits in with my watch.
Click to expand...
Click to collapse
Then why don't you use the carlspaco mod 2? You said that it works with your watch.
janekmuric said:
Then why don't you use the carlspaco mod 2? You said that it works with your watch.
Click to expand...
Click to collapse
Actually,I am using it right now,but it also causes the camera and bluetooth crash.
janekmuric said:
Then why don't you use the carlspaco mod 2? You said that it works with your watch.
Click to expand...
Click to collapse
It does,but it also makes the camera and the Bluetooth crash.I've tried them all but the problem still persists.
oops,same reply twice. sorry for that.
Rishan00 said:
oops,same reply twice. sorry for that.
Click to expand...
Click to collapse
Well, I'm sorry about that, but I can't help you. If there is no stock or compatible firmware, there's not way to easily fix it.
janekmuric said:
Well, I'm sorry about that, but I can't help you. If there is no stock or compatible firmware, there's not way to easily fix it.
Click to expand...
Click to collapse
Nevermind........at least you tried.......,,,(my hard earned pocket money.....)
Rishan00 said:
Nevermind........at least you tried.......,,,(my hard earned pocket money.....)
Click to expand...
Click to collapse
Don't you have a device repair shop anywhere nearby? Most repair shops use JTAG tehniques for software problems which are pretty much bound to work. Although they charge for their service.
janekmuric said:
Don't you have a device repair shop anywhere nearby? Most repair shops use JTAG tehniques for software problems which are pretty much bound to work. Although they charge for their service.
Click to expand...
Click to collapse
Well......my country sucks........it's got no such service shop around..........
Rishan00 said:
Well......my country sucks........it's got no such service shop around..........
Click to expand...
Click to collapse
Really? In what country?
janekmuric said:
Really? In what country?
Click to expand...
Click to collapse
India.....
I'm coming back to Samsung from the LGv20. It was a ***** to do anything on that phone. I'm wondering if there is yet a possible hotspot mod that works. Thanks in advance!
This should work https://forum.xda-developers.com/showthread.php?t=3383680
Hacked N8
frsh20 said:
I'm coming back to Samsung from the LGv20. It was a ***** to do anything on that phone. I'm wondering if there is yet a possible hotspot mod that works. Thanks in advance!
Click to expand...
Click to collapse
Search the threads other options are available
wepa said:
This should work https://forum.xda-developers.com/showthread.php?t=3383680
Hacked N8
Click to expand...
Click to collapse
Once I turn Wi-Fi sharing off it kills the hotspot.... Idk. I'll keep searching.
Any update?
alukarulz said:
Any update?
Click to expand...
Click to collapse
The steps work for me. I find myself having Wi-Fi on with the wrong passwords entered into 3 sources. I then toggle the Wi-Fi sharing and the hotspot until it works. I'm sure there is an easier way out there but it has worked for me since day 1.
frsh20 said:
The steps work for me. I find myself having Wi-Fi on with the wrong passwords entered into 3 sources. I then toggle the Wi-Fi sharing and the hotspot until it works. I'm sure there is an easier way out there but it has worked for me since day 1.
Click to expand...
Click to collapse
What phone carrier are you using?
alukarulz said:
What phone carrier are you using?
Click to expand...
Click to collapse
AT&T
Dear sir i suddenly added the s7562c firmware in odin and flash it on my s7562 mobile phone now my rotation is not working and it also not giving compass value's. Please tell me how can i fix it.
Try going back to stock and see whether it's fixed.
phamanhvu01 said:
Try going back to stock and see whether it's fixed.
Click to expand...
Click to collapse
No it's not fixed.
Sufi7 said:
No it's not fixed.
Click to expand...
Click to collapse
Make sure that you are using the S7562's baseband. Otherwise, I'm out of ideas, sorry.
phamanhvu01 said:
Make sure that you are using the S7562's baseband. Otherwise, I'm out of ideas, sorry.
Click to expand...
Click to collapse
Yes i am using s7562 baseband.
Sufi7 said:
Yes i am using s7562 baseband.
Click to expand...
Click to collapse
Then I'm out of idea, sorry.
phamanhvu01 said:
Then I'm out of idea, sorry.
Click to expand...
Click to collapse
Is there any possibility that it proximity sensor ic is damaged.
Sufi7 said:
Is there any possibility that it proximity sensor ic is damaged.
Click to expand...
Click to collapse
I guess so. Then again, I have no idea about this. If flashing stock isn't working, then it should be hardware-related, as far as I know.
phamanhvu01 said:
I guess so. Then again, I have no idea about this. If flashing stock isn't working, then it should be hardware-related, as far as I know.
Click to expand...
Click to collapse
Ok thanks.
I've seen a few people mention engineering mode and that it has calibration settings for the proximity sensor, which I've been having issues with. I read that the code is *#808#, but after I type that in the dialer, the text disappears and nothing happens. I found about 3 or 4 other codes around online, but none of them worked. Any ideas? I'm on 9.5.11. I'm rooted and using the ElementalX kernel.
amirage said:
Nope, not working
Click to expand...
Click to collapse
:crying:Not working 1+ 7t OS 10.3.4...
Any other solution?
mkzpxy said:
:crying:Not working 1+ 7t OS 10.3.4...
Any other solution?
Click to expand...
Click to collapse
If you have root enabled, you can try installing this module created by @jamal2367.
dianoandr said:
If you have root enabled, you can try installing this module created by @jamal2367.
Click to expand...
Click to collapse
What do this module?
Mervingio said:
What do this module?
Click to expand...
Click to collapse
Overwrites the file "sys_secrecy_switch_list.xml" with an old release, if I understood correctly, this xml has been modified by OnePlus to block access to engineering mode. I knew this solution because it was used on OnePlus 8 in the ExOS 10 rom and, if I remember correctly, in the xXx rom.
dianoandr said:
Overwrites the file "sys_secrecy_switch_list.xml" with an old release, if I understood correctly, this xml has been modified by OnePlus to block access to engineering mode. I knew this solution because it was used on OnePlus 8 in the ExOS 10 rom and, if I remember correctly, in the xXx rom.
Click to expand...
Click to collapse
Nice but need stock dialer right? I'm using Google Phone now
Mervingio said:
Nice but need stock dialer right? I'm using Google Phone now
Click to expand...
Click to collapse
Honestly I don't know if it works with alternative dialers too, I tried it with the stock dialer.
Oneplus 7t
hallo dare said:
Thanks. Yeah that's wherr i was downloading from, but still the same result. I'm on eu version, what version are you on?
Click to expand...
Click to collapse
It's not working for me.
If you are having that many issues with the sensor, maybe get it replaced?
equlizer said:
If you are having that many issues with the sensor, maybe get it replaced?
Click to expand...
Click to collapse
The proximity sensor isn't that bad. Sometimes the screen will come on for a few seconds while on a call. I figured I'd try to calibrate it. The bigger problem to me is not being able to get in to engineering mode. Does that code open up engineering mode for you?
mapolidori said:
The proximity sensor isn't that bad. Sometimes the screen will come on for a few seconds while on a call. I figured I'd try to calibrate it. The bigger problem to me is not being able to get in to engineering mode. Does that code open up engineering mode for you?
Click to expand...
Click to collapse
It works on 9.5.9 for sure.... but for some reason it doesn't work on 9.5.11 either a bug or they took away users ability to get into engineering mode....
Did you figure it out? How to enter the engineering menu?
I can't acces service menu either. Running 9.5.11
I wanted to calibrate the rotation sensor because out of 10 times auto rotation only works 3 times for me. Super annoying, especially on a device like this..
My sensor is faulty together with accelerometer and the proximity sensor. I tried everything. I'm sending my 7pro to warranty tomorrow.
mapolidori said:
I've seen a few people mention engineering mode and that it has calibration settings for the proximity sensor, which I've been having issues with. I read that the code is *#808#, but after I type that in the dialer, the text disappears and nothing happens. I found about 3 or 4 other codes around online, but none of them worked. Any ideas? I'm on 9.5.11. I'm rooted and using the ElementalX kernel.
Click to expand...
Click to collapse
*#808# doesn't work anymore. they removed it on 9.5.11
Just download and install the engineering mode app from appmirror then the code will work
https://www.apkmirror.com/apk/onepl...-0-171117173719-25c8842-android-apk-download/
shan_pei said:
Just download and install the engineering mode app from appmirror then the code will work
https://www.apkmirror.com/apk/onepl...-0-171117173719-25c8842-android-apk-download/
Click to expand...
Click to collapse
For pie, not android 10
hallo dare said:
For pie, not android 10
Click to expand...
Click to collapse
I am on Android 10 and it works for me. Sometimes it will fc but generally not a big problem.
shan_pei said:
I am on Android 10 and it works for me. Sometimes it will fc but generally not a big problem.
Click to expand...
Click to collapse
Interesting, it just goes to app info for me when I try it.
hallo dare said:
Interesting, it just goes to app info for me when I try it.
Click to expand...
Click to collapse
Working fine for me on 10.0.1 after installing engineering mode
robertelam83 said:
Working fine for me on 10.0.1 after installing engineering mode
Click to expand...
Click to collapse
Can you send me on the link to where you got it from please cos it just ain't happening for me
robertelam83 said:
Working fine for me on 10.0.1 after installing engineering mode
Click to expand...
Click to collapse
---------- Post added at 06:50 AM ---------- Previous post was at 06:50 AM ----------
[/COLOR]
hallo dare said:
Can you send me on the link to where you got it from please cos it just ain't happening for me
Click to expand...
Click to collapse
I used this one
Just download and install the engineering mode app from appmirror then the code will work
https://www.apkmirror.com/apk/onepl...-0-171117173719-25c8842-android-apk-download/
robertelam83 said:
---------- Post added at 06:50 AM ---------- Previous post was at 06:50 AM ----------
[/COLOR]
I used this one
Just download and install the engineering mode app from appmirror then the code will work
https://www.apkmirror.com/apk/onepl...-0-171117173719-25c8842-android-apk-download/
Click to expand...
Click to collapse
Thanks. Yeah that's wherr i was downloading from, but still the same result. I'm on eu version, what version are you on?
hallo dare said:
Thanks. Yeah that's wherr i was downloading from, but still the same result. I'm on eu version, what version are you on?
Click to expand...
Click to collapse
I'm on the Global version
Nope, not working
Hi,
Since I updated my OP 8T to Android 13, I have no vibration for any notification but it still working for calls.
I checked each settings and everything seems to be ok. I restarted the phone.. nothing changes...
I don't have any idea.
Someone can help me?
Thank you.
Anybody get an answer?
lolokro said:
Anybody get an answer?
Click to expand...
Click to collapse
Did you try to factory reset your phone?
Rootk1t said:
Did you try to factory reset your phone?
Click to expand...
Click to collapse
I really want to avoid this