Database Info

Color Literati Ereader Android Possible?

I bought a Literati for only $65 shipped and was thinking maybe android could be ported to this device.
CPU:S3C6410 [email protected]
Audio: None
Camera: None
Touch screen: None
Screen: Color 7" unknown X Unknown
Memory
SD: up to 16gig
User: 256mb(black) expandable to 1gb once telnet is enabled.
System: 64mb(i think)
USB
Mini USB: Mode=device
internal USB: Mode=Host(currently connected to a wireless dongle)
Network
Wifi: rt2860sta
3G: None
Ethernet: None
NAND 512MiB 3,3V 8-bit
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x00340000 : "Kernel"
0x00340000-0x00d40000 : "resource"
0x00d40000-0x11140000 : "File System 1"
0x11140000-0x20000000 : "User space"
The Bootloader is:
U-Boot 1.1.6-g794ab523-dirty (Aug 23 2010 - 00:52:53) for SMDK6410
The Environment has:
bootargs=console=ttySAC0,115200 loglevel=0 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs
bootcmd=nand read c0008000 40000 300000;bootm c0008000
bootdelay=0
baudrate=115200
ethaddr=[MAC of Literati]
ipaddr=192.168.1.28
serverip=192.168.1.27
gatewayip=192.168.1.2
netmask=255.255.255.0
The Kernel is:
Linux (none) 2.6.24.2 #180 Mon Aug 23 00:49:07 CST 2010 armv6l GNU/Linux
The resource:
It begins with FILE_SECTION04 and then a file directory which shows logo.bin, update.bin, and zImage_rfs.
Here is the development website with more information http://literatidevs.com

Just got one of these today, actually. I looked up and down that board, but didn't find any info on enabling telnet. You have a link handy?

Lumia 710 NSS problem with bootloader installation.

Hello Guys!
When I click on read info in NSS pro I get these info and I am not able install the qualcomm bootloader. In windows 8 the nss can find my phone, but I got nss stopped message everytime. I tried to run in compatible mode and tried to run on my other computer with windows 8 but I got the same error. Now I am running VMware with W7 X64 and get this phone info:
----------------------------------------------------------------------
Checking selection...Supported(USB) interface selected.
Init connection...Done.
----------------------------------------------------------------------
Phone details:
-----------------
NCSD Version: N/A
SW Version: N/A
HW Version: N/A
IMEI: N/A
Product Code: N/A
Basic Product Code: N/A
Module Code: N/A
Production SN: N/A
Battery life: N/A
Number of Nams: N/A
Number of Mins: N/A
ESN: N/A
ESN Decoded: N/A
PRL Version: N/A
Battery Charge Capacity: N/A
Battery Full Capacity: N/A
Battery Cycle Count: N/A
Battery Temperature: N/A
Battery Voltage: N/A
Battery State of Charge: N/A
Battery Average Current: N/A
Battery Flags: N/A
Battery Standby Current: N/A
Battery MaxLoad Current: N/A
Battery Health State: N/A
Battery Nominal Capacity: N/A
Battery Remaining Capacity: N/A
In windows 8 I get this before the nss stops:
----------------------------------------------------------------------
Checking selection...Supported(USB) interface selected.
Init connection...Done.
----------------------------------------------------------------------
Phone details:
-----------------
NCSD Version: 1.9
SW Version: 1600.3036.8858.12460
HW Version: 112.1402.2.1
IMEI: 3528430529*****
Product Code: 059N2Q4
Basic Product Code: 059H***
Module Code: 02049**
Production SN: MQO873297
Public ID: 3D543133A6F53928056E0D8AC69B7DD1
WLAN MAC: D0DB32BC9FDA0000
Battery life: 100%
Number of Nams: 1
Number of Mins: 2
ESN: 00000000
ESN Decoded: 0
PRL Version: 65535
Battery Charge Capacity: 1198mA
Battery Full Capacity: 1230mA
Battery Cycle Count: 98
Battery Temperature: 320
Battery Voltage: 4157mV
Battery State of Charge: 100%
Battery Average Current: 96mA
Battery Flags: 552
Battery Standby Current: -4mA
Battery MaxLoad Current: -521mA
Battery Health State: 861
Battery Nominal Capacity: 1230mA
Battery Remaining Capacity: 1198mA
My virtual windows can't detect the phone drivers in device manager. Pls see the picture attached.
Pls help me!
Thanks in advance!

[Q] Can somebody help me interpret this debug screen? (Wave GT8500)

A while ago I received a free Wave S8500 running Bada 1.2. Since this OS was pretty awful I decided to upgrade having done the process before on another phone of the same model. Unfortunately I was stupid and managed to flash the wrong files so my phone ended up in a boot loop. I found the correct set of files and tried to flash them but Multiloader only works up to SHP APP, at this point it fails with a "serial port open error". When I try and boot the phone I reach a blue screen full of the following debugging information:
Page: 1/2 <Pic #>
S/W version: S8500+XP+KJ1
Modem: Q6270B-KPRBL-1.5.45T
SHP: VPP R5 2.1.1
Build Host:s1-AGENT08
BuildAt:2011/10/05 22:44:23
App Debug Level l: 0
ASSERTION_REQUIRE:m_hLib != IN
VALID_HOBJ failed/ (file WinLibDllMgr.cpp, line 40)
Cannot load (shpWindow)
<Callstack information>
PC = 40318BEF OemDumpRegister
LR = 403118 OemDumpRegister
<Running Task(InvalidTask) Call stack>
_SysAssertReport
GWES:WinLib::CDI I Mgr::LoadLibrary
WinLibDllProxyInit
WinLibDispatch
OemBmPrelnitMochaTask
mochaTaskPreInit
Page: 2/2 <* #>
All HW Information:
HW VERSION: S8500_REV07
IMEI VERSION: Not Active
RF CAL DATE: Not Active
Bad Block Information:
nNumBMPs : 0
nAge : 0
Run Time Bad Block Occurred :
Init BMPs = 2, Current BMPs = 0
Nucleus Task Information:
Running Task name = SHP_PRE SI
ices = 00000000
Wait = 00000000
Signal = 00000000
Priority = 0
To exit
Press 0 for 2sec
After pressing the home key it goes to a screen I've never previously seen with yellow text stating "UPLOAD to pc". Clearly the phone has a problem with the SHP_APP file and the Windows system it's connected to but beyond that I'm completely out of my depth. Can somebody shed some light on what is wrong with my phone and how I might go about fixing it?
Thanks in advance.

help me for unlock galaxy N920T

I have a problem with and unlock my galaxy N9250T with Z3X SamsungToolPRO_24.3 it gives me this message.
Operation: Read Codes
Selected model: SM-N920T
Software version: 24.3
Please wait, generating hash codes file, this can take few minutes... OK
Waiting ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SM-N920T
Android version: 5.1.1
Product code: SM-N920TZWATMB
Phone version: N920TUVU2COJ5
PDA version: N920TUVU2COJ5
CSC version: N920TTMB2COJ5
CSC country code: USA
CSC sales code: TMB
HW version: REV0.2
Phone S/N: RF8G903HHRY
Modem board: SHANNON333
RF cal date: 20150902
IMEI:
Checking Super user right... true
Initialization AT RIL...
Exception: Access violation at address 004074E0 in module 'SamsungToolPRO.exe'. Read of address 00000000
Done with Samsung Tool PRO v.24.3

I have the same damn problem...
Operation: Unlock SPRNT
Selected model: SM-N920P
Software version: 24.3
Waiting ADB device... OK
Reading phone info...
Model: SM-N920P
Android version: 6.0.1
Product code: Not Active
Phone version: N920PVPS3BQB1
PDA version: N920PVPS3BQB1
CSC version: N920PSPT3BQB1
CSC country code: USA
CSC sales code: SPR
HW version: N920P.04
Phone S/N: 00000000000
Modem board: MDM9635M
RF cal date: 2016.01.21
IMEI:
Initialization AT RIL...
Exception: Access violation at address 004074E0 in module 'SamsungToolPRO.exe'. Read of address 00000000
Done with Samsung Tool PRO v.24.3

Whatsapp Freezes in Background, Delayed Messages Sent

Hello There ..
I am facing an issue with Whatsapp, that it Freezes in Background, I messaged someone, but it not sent from my side instantly, its sent delayed.. Also if i delete a message, its not deleted instantly, but deletes after few minutes ..
Please go thru ScreenCast Video - (https://youtu.be/bEE6yOtH2hE)..
Phone Log is below..
Its very irritating.. Please Help..
Awaiting..
Rajat Jain
[email protected]
--Support Info--
Debug info: +919897243000
Description: 2.19.63
Version: 2.19.63
App: com.whatsapp.w4b
LC: US
LG: en
Context: settings/about
Carrier: airtel
Manufacturer: OPPO
Model: RMX1807
CPU ABI: arm64-v8a
OS: 9
Socket Conn: UP
Radio MCC-MNC: 404-97
SIM MCC-MNC: 404-97
Free Space Built-In: 41113198592 (41.11 GB)
Free Space Removable: 40903483392 (40.90 GB)
FAQ Results Returned: 10
FAQ Results Read: 0
Smb count: 311
Ent count: 5
Away state: 0
Away start time: 0
Away end time: 0
Greeting message on: true
CCode: 91 9897243000
Target: release
Product: RMX1807
Device: RMX1807
Build: RMX1807EX_11_A.21
Board: sdm660
Kernel: Unknown release unknown version
Connection: M.O.B.I.L.E. (L.T.E.)
Device ISO8601: 2019-07-23 07:28:35.408+0530
Phone Type: G.S.M.
Network Type: L.T.E.
Missing Permissions: android.permission.INSTALL_SHORTCUT, android.permission.READ_PHONE_STATE, android.permission.REQUEST_INSTALL_PACKAGES, com.sec.android.provider.badge.permission.READ, com.sec.android.provider.badge.permission.WRITE, com.htc.launcher.permission.READ_SETTINGS, com.htc.launcher.permission.UPDATE_SHORTCUT, com.sonyericsson.home.permission.BROADCAST_BADGE, com.sonymobile.home.permission.PROVIDER_INSERT_BADGE, com.huawei.android.launcher.permission.READ_SETTINGS, com.huawei.android.launcher.permission.WRITE_SETTINGS, com.huawei.android.launcher.permission.CHANGE_BADGE
Architecture: aarch64
Diagnostic Codes: TK-NS-2 FE-GDE FE-GDC FE-VIDC FE-SMSRTV
Network metered: 389:false;395:true
Network restricted: 389:true;395:false
Data roaming: false
Tel roaming: false
ref: 30200381066
Video transcode: supported
Datacenter: vll
Screen reader: false

Thread closed as duplicate of https://forum.xda-developers.com/android/help/whatsapp-freezes-background-delayed-t3953082