moisture/loca glue front camera - OnePlus 7 Pro Questions & Answers

the front camera has moisture it seems to be loca glue I don't know how I did apply a whitestone screen protector but made sure the speaker grill was covered .some has seemed to get through and had gone under the front camera lens, I tried to rub and wipe it out but seems to have made it worse any advice to help fix please

"Isopropyl Liquid Cleaner" or "ACENIX® LCD Glue Remover UV LOCA OCA for Mobile Phone Screens"

Do I need to heat the glue or just apply cleaner to the camera lens? I would attach pics but don't seem to let me, because it has gone under the front camera lens
Sent from my GM1913 using Tapatalk

Related

Clean camera lens

Hi Everyone
Does anyone know how to take apart the VOX so that the camera lens can be cleaned... mine has some moisture behind it the lens cover.
I have tried to find a service manual but cant find one...
Anyone know ?
Cheers
SteveC
You can carefully pry off the silver back (saying 2.0 megapixels) with a small knife and then you'll have access to the plastic lens-cover, which also can be removed. It's just glued to the back.
However, I have the same problem... It's like a haze on the plastic, haven't been able to clean it :-( Have been thinking to just remove the plastic lens cover, pictures are much clearer without it!
x11freak said:
However, I have the same problem... It's like a haze on the plastic, haven't been able to clean it :-( Have been thinking to just remove the plastic lens cover, pictures are much clearer without it!
Click to expand...
Click to collapse
Same problem here but I'm afraid the camera lens won't take the dirt and dust which it is exposed to even when using and transporting the phone very carefully. Thus I did not remove the cover yet, although the photos do look somewhat hazy.

Camera flash lens cover scratches easily?

Took phone out case today to just kinda clean off and noticed that the camera flash lens had a ton of scratches on it,anyone else notice or have this problem?any does anyone know if it's even made out of glass,wouldn't think glass would scratch that easily, my phone been in case and use holster since I got it.
Never got one scratch on my lense, must be a defective lense cover. I have mine in an otterbox and it's fine.
Sent from my SM-N920T using XDA Premium HD app
Just to clarify,referring to lens for flash and heart rate sensor.
Raver27 said:
Just to clarify,referring to lens for flash and heart rate sensor.
Click to expand...
Click to collapse
Yep, neither my camera lens or flash/heart rate monitor get scratched from my case, should be a defect
Sent from my SM-N920T using XDA Premium HD app
Thanks,just spoke with someone who repairs them,they said the HR sensor lens is made of plastic,just a heads up.
I probably did it from wiping it clean today..smh.
A scratch has 0 effect on either the flash or HR that's probably why they opted for cheaper plastic than Gorilla glass like everywhere else covering essential components like the screen and camera lens.
nique0201 said:
A scratch has 0 effect on either the flash or HR that's probably why they opted for cheaper plastic than Gorilla glass like everywhere else covering essential components like the screen and camera lens.
Click to expand...
Click to collapse
Yea I know,it just sucks that it scratches so easily,looking at it in light it really looks like my wiping with shirt scratch it,tons of scratches
Just figured I share
Raver27 said:
Just figured I share
Click to expand...
Click to collapse
My note 5 had a clear plastic film over the lens and flash that did scratch easily.
Looking at your photos I think yours might to - look at it closely and I think you will see the edge of the film.
Try to carefully remove it using the corner of a credit card or similar plastic item.
DangerousDave said:
My note 5 had a clear plastic film over the lens and flash that did scratch easily.
Looking at your photos I think yours might to - look at it closely and I think you will see the edge of the film.
Try to carefully remove it using the corner of a credit card or similar plastic item.
Click to expand...
Click to collapse
Unfortunately I took that plastic film off the same day I got it.. thanks tho..

Scratched Back Camera Lens Cover

Does anyone know of anyway to remove "scratches" out of the back camera lens? I do not consider it an actual scratch because it appears like its a "fine-smear" of the blue coating on the glass. I tried youtube videos of the alcohol on the Q-Tip which did not work. Any other suggestions?
blue coating?
Yes
Gdi xda i had a nice long reply for you that disappeared. Short version is that's a anti glare coating that you don't strictly need. The lens coating can be removed by polishing using a Q tip and toothpaste. I did this with my HTC M8 and It takes a long long time so just keep working at it for a good 20 - 30 minutes. Use only a spec of toothpaste and wipe off excess as you go to prevent a buildup of gunk around the lens. Only the center needs to be clear the edges don't matter. If you are not noticing any haze when taking a picture don't bother removing the coating.

Camera Heat Damage?? Pictures all "foggy"

So the glass covering the camera lens recently broke on my girlfriend's Galaxy S7. The camera still worked and focused correctly, but I tried to replace the glass.
I used a heat gun to remove all of the broken glass and adhesive. Ever since I did that, everything looks "foggy" in the camera app. It's like there's moisture covering the lens. We tried cleaning the lens with a Q-tip, but it still looks the same.
Anyone know why this would happen? Did I damage the camera unit with the heat? Any advice on what to do? Thanks in advance!
Maybe some adhesive is left between camera module and lens? Are lens exactly the same as the ones before? Just throwing some ideas around because I am honestly not an expert on this, might be damaged module but I don't know enough to say anything.
Thanks for the reply. Yeah, that is possible. Although if that's the case, I don't know why it won't come off. I haven't actually put the new glass cover over the camera unit lens yet, and I tried cleaning the module lens with a Q-tip. Same result. So, I'm wondering if I damaged the unit, or maybe melted the lens slightly. I guess it is what it is. Thanks again!
Wait but is it foggy when you put lens over it? I mean is the whole package there or not? Because that's what lens are for, to focus stuff on the camera sensor. It's not clear from your post if you actually did that or not. Camera without lens with always be "foggy".
Edit: Reading it for 3rd time, is the exterior glass the only thing broken or is there more? Flat glass will not focus image so that is no the issue then. For a second I thought that you have camera module without any glass. Post some pictures I guess, from the camera and of the camera.
Sorry for the confusion. Yes, the exterior glass was the only thing broken. When it first broke, I ripped the shards off, and bought a replacement glass cover online. The camera was still working until I used a heat gun to remove the residual glass and adhesive.
After I did that, I tested the camera again, and that's when it looked foggy. Anyway, I'll post some pictures when I get the chance.
Why would u even use heat gun for that? I changed about 20 camera lenses and all without heat gun, just break the glass and ripp it off, clean the leftover residue , put new glass and bam works... maybe u have condensation?
Can you share a photo taken with the camera? it'll help to figure out what's happening.
Maybe some clues :
- If the lens is made with other material than glass they are heat and chemicals sensitive
- Some humidity got under the lens
- Deep scratch on the lens
- The lens barrel moved for some reason (pushed or not in his rail anymore) or is not calibrated anymore
(btw never use Q-tips to clean lenses they can scratch the lens and coating - Use optical cleaning paper)
NeoDJW said:
Why would u even use heat gun for that? I changed about 20 camera lenses and all without heat gun, just break the glass and ripp it off, clean the leftover residue , put new glass and bam works... maybe u have condensation?
Click to expand...
Click to collapse
I was following a tutorial video I found online. The said that any residual adhesive from the old glass might cause an imperfect seal, and any old glass pieces might cause the new glass to crack. So, they removed it with a heat gun. How do you go about cleaning the leftover residue? Just curious. Thanks.
ttf said:
Can you share a photo taken with the camera? it'll help to figure out what's happening.
Maybe some clues :
- If the lens is made with other material than glass they are heat and chemicals sensitive
- Some humidity got under the lens
- Deep scratch on the lens
- The lens barrel moved for some reason (pushed or not in his rail anymore) or is not calibrated anymore
(btw never use Q-tips to clean lenses they can scratch the lens and coating - Use optical cleaning paper)
Click to expand...
Click to collapse
Thanks for the input. Here's some photos. This is what an image looks like when taken with the camera currently:
Here's a picture taken with my S7, which doesn't have a damaged camera. This is what the image should look like:
Here's a closeup shot of the damaged camera. I haven't put the replacement glass on yet. I am waiting until this issue is resolved.
Looking at that close up shot of the lens, it does look like there's something on it. I can't tell if those are scratches or residue. Any idea what might be a good way to go about cleaning it? It seems like it would be hard to clean something that small with optical cleaning paper, especially since the unit moves. Thanks again!
Thanks for the pics.
Somehow hard to figure out if it's some Q-tips dust of some melted plastic coating gel.
Yes it's hard to clean such a little surface but try to wrap your Qtips or a small non abrasive tool with the optical paper, add some 100% ethanol or 98% rubbing alcohol on it.
Do you have a air blower pump for camera?, if yes try with that first and if it still stuck on the lens then something melted, Gel coating? not sure. If it's inside well it's probably some gel...unfortunately there is nothing much you can do but changing the camera module.
Hope it's only dust, good luck.
ttf said:
Thanks for the pics.
Somehow hard to figure out if it's some Q-tips dust of some melted plastic coating gel.
Yes it's hard to clean such a little surface but try to wrap your Qtips or a small non abrasive tool with the optical paper, add some 100% ethanol or 98% rubbing alcohol on it.
Do you have a air blower pump for camera?, if yes try with that first and if it still stuck on the lens then something melted, Gel coating? not sure. If it's inside well it's probably some gel...unfortunately there is nothing much you can do but changing the camera module.
Hope it's only dust, good luck.
Click to expand...
Click to collapse
Thanks for the advice! I don't have an air blower pump. Can I use a can of air? Anyway, I'll try these tips when I get back in town tomorrow. Thank you again!
Sure a can of air can do the trick, be careful though, some spray liquid and let some residue, test it on a piece of paper first. Tell us how it goes.
Have you washed the phone with water before the glass broke?
Airman1947 said:
Looking at that close up shot of the lens, it does look like there's something on it.
Click to expand...
Click to collapse
If the gunk doesn't clear with alcohol (e.g. lens cleaner) then it may be that the lens itself is damaged. If the heat gun made the lens too hot it may have damaged the actual lens itself.
That rear glass looks like the coating is flaking. You might need to replace the module. http://www.ebay.com/itm/Genuine-Sam...ont-Rear-Lens-Flex-Cable-Module-/192066941308
Thanks for all the help, everyone! So, I tried cleaning the lens with a can of air, and also with lens cleaner on a Q-tip covered with optical cleaning paper. Same results.
Looks like whatever the problem is, it's gonna require replacing the camera unit Darn, wish I hadn't touched it. Was working fine. Anyway, thanks again!
Thanks for the follow up and sorry to hear it didn't fixed the problem. Maybe you could ask samsung to get you a price quote for the replacement or if you're really adventurous you could buy the camera module as a DIY project, be extra careful though you'll most likely avoid your warranty and the IP67/68 (someone posted a link in the thread for the camera unit), or ask a quote in a 3rd party shop?
Airman1947 said:
Thanks for the reply. Yeah, that is possible. Although if that's the case, I don't know why it won't come off. I haven't actually put the new glass cover over the camera unit lens yet, and I tried cleaning the module lens with a Q-tip. Same result. So, I'm wondering if I damaged the unit, or maybe melted the lens slightly. I guess it is what it is. Thanks again!
Click to expand...
Click to collapse
I'm having the exact same problem and same question! I just finished replacing my LCD. I took a picture to test it out, before putting the back cover back on, and it worked perfect. Then, I used to the heat gun to replace my camera lens, after putting the new back cover on, and now nothing buy blurry, and even looks like a couple of round water spots. I took the lens back off and tried cleaning it, I've shaken in, reset the camera settings, at this point...I'm afraid I damaged the camera with the heat gun and have to open it back up and have replace the whole camera.
JOFowler said:
I'm having the exact same problem and same question! I just finished replacing my LCD. I took a picture to test it out, before putting the back cover back on, and it worked perfect. Then, I used to the heat gun to replace my camera lens, after putting the new back cover on, and now nothing buy blurry, and even looks like a couple of round water spots. I took the lens back off and tried cleaning it, I've shaken in, reset the camera settings, at this point...I'm afraid I damaged the camera with the heat gun and have to open it back up and have replace the whole camera.
Click to expand...
Click to collapse
Aw man, yeah looks like the same thing happened to you. Yeah, I think that the heat damages the lens on the camera unit. I couldn't find a way to get rid of the blurriness.
I ended up just cashing in on the phone insurance for mine. If you have it, I'd suggest doing the same, unless you're feeling adventurous and wanna try and replace the camera unit. Sorry I can't be more help. Good luck!

Redmi note 7 pro camera issue

My redmi note 7 pro's camera protective glass broke. I removed the broken glass completely. There was no issue with the inside camera lens. Picture was absolutely fine. After 2 days the camera lense got blurred. I thought it is due to dust particles. Then I went to repair store to clean the camera lens and to put a camera protective glass on it. But the problem is the lens got completely damaged( this is blurred) after keeping it in open environment for two days. Now it can't be clean with anything glass cleaning liquids. Can moisture really damage the phone camera lens??
Please provide a solution how should I clean my camera lens.

Categories

Resources