Related
So I unlocked by Bootloader and Rooted my OP6, the question I have is will the OTA updates be installed without any problems or will I have to install it manually?
Also when I install twrp (I have not installed yet) how will I need to update my phone through OTA?
Sorry if this is a noob question because the last time I rooted and flashed roms the software support was over so I never had any OTA updates.
Thanks
It will download the update but it most probably will download the Full 1.4GB ZIP
Meaning it will install the full rom and not the small update package.
It will install normally to the other slot and after reboot you should be updated.
This should work just fine with TWRP because it updates your other slot within Android, not in recovery.
After update, reboot phone, then reboot to TWRP and install Magisk!
I updated while being rooted and TWRP installed. Just download the update, then reflash twrp and root and everything works fine.
So if u want update your system but don't need TWRP you can just download OTA with system updater and install it.
If you want magisk don't reboot! Open magisk and press install and install to second slot. Then reboot. You will have an updated system with working magisk!
Kollachi said:
So if u want update your system but don't need TWRP you can just download OTA with system updater and install it.
If you want magisk don't reboot! Open magisk and press install and install to second slot. Then reboot. You will have an updated system with working magisk!
Click to expand...
Click to collapse
So the only hitch to get an official incremental OTA update, is the root? Unlocked bootloader and TWRP installed doesn't cause any trouble?
If you just remove the root and then check for the update, evrything gonna be fine, am I right?
But how does it work this "slot a" "slot b"? What does it mean? After an update will your OP6 get 2 roms in the same time? The new and the previous? What happen after an update and the reboot? Have you to delete the old rom?
Thx for the patience...
zappomax said:
So the only hitch to get an official incremental OTA update, is the root? Unlocked bootloader and TWRP installed doesn't cause any trouble?
If you just remove the root and then check for the update, evrything gonna be fine, am I right?
But how does it work this "slot a" "slot b"? What does it mean? After an update will your OP6 get 2 roms in the same time? The new and the previous? What happen after an update and the reboot? Have you to delete the old rom?
Thx for the patience...
Click to expand...
Click to collapse
I didn't even remove root. I can't explain you how this a and b is working. but what I know is, that every OTA is change the partition. And no u won't have 2 systems.
zappomax said:
So the only hitch to get an official incremental OTA update, is the root? Unlocked bootloader and TWRP installed doesn't cause any trouble?
If you just remove the root and then check for the update, evrything gonna be fine, am I right?
But how does it work this "slot a" "slot b"? What does it mean? After an update will your OP6 get 2 roms in the same time? The new and the previous? What happen after an update and the reboot? Have you to delete the old rom?
Thx for the patience...
Click to expand...
Click to collapse
If your current system runs for example on slot "a" the update will be installed on slot "b "...the slot that you currently not using
Nick502 said:
It will download the update but it most probably will download the Full 1.4GB ZIP
Meaning it will install the full rom and not the small update package.
It will install normally to the other slot and after reboot you should be updated.
This should work just fine with TWRP because it updates your other slot within Android, not in recovery.
After update, reboot phone, then reboot to TWRP and install Magisk!
Click to expand...
Click to collapse
So if I flash twrp now, then update OOS, only my root will be removed right which can be again flashed by twrp?
Harsh Keswani said:
So if I flash twrp now, then update OOS, only my root will be removed right which can be again flashed by twrp?
Click to expand...
Click to collapse
Yes, I'm not sure if you will keep TWRP.
But you can always reinstall TWRP and then reflash Magisk
Nick502 said:
Yes, I'm not sure if you will keep TWRP.
But you can always reinstall TWRP and then reflash Magisk
Click to expand...
Click to collapse
Thanks
Nick502 said:
Yes, I'm not sure if you will keep TWRP.
But you can always reinstall TWRP and then reflash Magisk
Click to expand...
Click to collapse
One more thing, everytime I update, it's going to download the full ROM?
Harsh Keswani said:
One more thing, everytime I update, it's going to download the full ROM?
Click to expand...
Click to collapse
If I'm not wrong, on a rooted device OTA installs a full rom. On a not-rooted phone OTA installs just the incremental update.
I only unlocked the bootloader to prepare for TRWP and root (So no TWRP and root yet) and it tells me it will download full update.
TaranQ said:
I only unlocked the bootloader to prepare for TRWP and root (So no TWRP and root yet) and it tells me it will download full update.
Click to expand...
Click to collapse
I guess it recognizes the unlocked bootloader and then it always downloads and installs full update.
Why would you unlock your bootloader and then don't root :laugh:
---------- Post added at 01:15 PM ---------- Previous post was at 01:13 PM ----------
[/COLOR]
pdppdp said:
I guess it recognizes the unlocked bootloader and then it always downloads and installs full update.
Why would you unlock your bootloader and then don't root :laugh:
Click to expand...
Click to collapse
Because I was not sure I wanted root again there are always apps that even with Magisk hide won't work.
But just to make sure I prepared by unlocking bootloader so if I decide to go for TWRP and root my data and storage won't get wiped which would mean starting all over again and losing app-data.
So, if I update from a ROM rooted with TWRP, will not the user data be deleted? Should we just root again and install the TWRP?
I had rooted 5.1.5 with TWRP and Magisk. I just downloaded the full package, copied it to phone storage. Then went to system update, update locally, picked the file and it ran the update.
However after reboot and update complete I lost TWRP and root. So I went to fastboot, booted the official TWRP (fastboot boot twrp.img). Then flashed the official TWRP and Magisk for root, rebooted and all was good again.
I'm pretty sure there's an easier way of doing this but this worked for me.
marvel79 said:
I had rooted 5.1.5 with TWRP and Magisk. I just downloaded the full package, copied it to phone storage. Then went to system update, update locally, picked the file and it ran the update.
However after reboot and update complete I lost TWRP and root. So I went to fastboot, booted the official TWRP (fastboot boot twrp.img). Then flashed the official TWRP and Magisk for root, rebooted and all was good again.
I'm pretty sure there's an easier way of doing this but this worked for me.
Click to expand...
Click to collapse
In theory, with the Oxygen Updater application you can install the OTA and Magisk in 1 step.
sakun-ice said:
In theory, with the Oxygen Updater application you can install the OTA and Magisk in 1 step.
Click to expand...
Click to collapse
Yeah probably but it has a lot of mixed reviews and this takes me 10 minutes more or so oh well. I'll rather do it like this It's not like we get a new update every week
maybe to help you all
me: 5.1.5, unlocked bootloader, unofficial TWRP from thread by wuxianlin, magisk 16.4
my procedure was to change to official twrp which can be done easily by
downloading the twrp installer from official site, put to internal storage
flash twrp official installer
still in recovery, select reboot: recovery
flash magisk
boot system
now download full 5.1.6 signed flashable zip
recovery: flash 5.1.6
reflash recovery
reboot recovery
flash magisk
boot system
now you have rooted 5.1.6 with official twrp and magisk, no wipe needed
Hi!
I have a OP6. Running rooted stock with BluSpark TWRP and Magisk. Some months ago I rooted it and I was running 9.0.1 or 9.0.0, not sure which one. I then updated to 9.0.2 OTA a week or so later. I can not remember the exact procedure, but everything worked fine. Today I installed 9.0.3 OTA and then used Magisk (18.0) before reboot to install it to slot A (9.0.2 was on B). Somehow, I ended up with a wiped device and stock recovery. Can anyone help me to find my potential fault in this? I don't want it wiped during the next OTA, it's a real hassle to set up everything again. I remember that I checked a guide that had tips on OTA, but I can't seem to find it.
Best.
yogra1921 said:
Hi!
I have a OP6. Running rooted stock with BluSpark TWRP and Magisk. Some months ago I rooted it and I was running 9.0.1 or 9.0.0, not sure which one. I then updated to 9.0.2 OTA a week or so later. I can not remember the exact procedure, but everything worked fine. Today I installed 9.0.3 OTA and then used Magisk (18.0) before reboot to install it to slot A (9.0.2 was on B). Somehow, I ended up with a wiped device and stock recovery. Can anyone help me to find my potential fault in this? I don't want it wiped during the next OTA, it's a real hassle to set up everything again. I remember that I checked a guide that had tips on OTA, but I can't seem to find it.
Best.
Click to expand...
Click to collapse
I had the same thing happen to me. I missed the part where I flash TWRP right after the OTA. That probably triggered the factory reset
So instead of rebooting, I should do a "fastboot boot IMAGE" and then install the bluspark twrp zip from inside that one? I guess I can boot up to TWRP and install Magisk as well after this while I'm at it?
Are you flashing from twrp?
If so,flash ROM zip
Flash twrp zip
Reboot to twrp
Flash magisk
Done.
If ur doing it from Android
Install ROM,when it asks you to reboot, DON'T
go to magisk app
Go to modules
Search for a/b twrp (you should only find one module)
Install it ,don't reboot
Go to main magisk screen
Press install,install, install to inactive slot (after OTA) after it's done you can REBOOT.
The module keeps your twrp
Flashing magisk to inactive slot will root the update you just installed
I was installing the OTA normally, without TWRP. It worked just fine last time.
You shouldn't install any OTA if you are rooted.
Only full roms.
yogra1921 said:
I was installing the OTA normally, without TWRP. It worked just fine last time.
Click to expand...
Click to collapse
Sent from my ONEPLUS A6003 using Tapatalk
I understand. But it doesn't change the fact that it worked like a charm last time. I just assumed there might be a general way.
RASTAVIPER said:
You shouldn't install any OTA if you are rooted.
Only full roms.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
On OOS it knows if you are rooted and will download full ROM,so it's fine if you install a/b twrp magisk module after (keeps twrp) and then install magisk to inactive slot .
What happened here is he probably forgot to install twrp and magisk probably got to the wrong slot, hence the wipe
Not only probably. I did not install TWRP after the OTA. And I probably got the Magisk slot right (I installed it to other slot though the manager). Thanks for your help!
So next time:
OTA
Check if all dev USB-settings are enabled (?)
Shut off
Boot to TWRP
Install TWRP
Install Magisk to new slot
Boot up
Seems right?
yogra1921 said:
Not only probably. I did not install TWRP after the OTA. And I probably got the Magisk slot right (I installed it to other slot though the manager). Thanks for your help!
So next time:
OTA
Check if all dev USB-settings are enabled (?)
Shut off
Boot to TWRP
Install TWRP
Install Magisk to new slot
Boot up
Seems right?
Click to expand...
Click to collapse
no.... you do what i wrote like 3 posts up.. DO NOT REBOOT!!
After every single rom flash, TWRP, from android or fastboot or whatever way you install any rom TWRP will be replaced, aswell as boot.img (magisk is there)
OTA
DONT REBOOOOOOTT!!!
go to magisk, search for A/B twrp module, install it
DONT REBOOT
Go to main screen of magisk
install, install, install to inactive slot.
done..
your way will wipe TWRP.
From twrp:
Flash rom zip
flash twrp
reboot to twrp
flash magisk
done
Oh yeah. I completely forgot about that the TWRP retention script exists. Perfect. This is exactly what I did last time. Thanks!
Was thinking about downgrading to 9.5.13 and re-flashing TWRP and upgrading through the common "flash to inactive slot" from magisk method. On the fence cause i figure TWRP for Android 10 will come out. To recap. I have a Converted Tmobile OP7 running android 10. I am rooted with magisk but stock recovery (No TWRP) just wanting to see what you guys think i should do. and if you comment for me to downgrade... would i just go through MSM tool and revert back to 9.5.13? and would it REVERT my OP7 back to TMOBILE? Thanks in advance
TimmyLe7 said:
Was thinking about downgrading to 9.5.13 and re-flashing TWRP and upgrading through the common "flash to inactive slot" from magisk method. On the fence cause i figure TWRP for Android 10 will come out. To recap. I have a Converted Tmobile OP7 running android 10. I am rooted with magisk but stock recovery (No TWRP) just wanting to see what you guys think i should do. and if you comment for me to downgrade... would i just go through MSM tool and revert back to 9.5.13? and would it REVERT my OP7 back to TMOBILE? Thanks in advance
Click to expand...
Click to collapse
There is TWRP for OxygenOS 10.
Check the thread. It's a -70 release.
If you already have root you can flash TWRP then do a direct flash of Magisk.
I keep both my slots at the same OS revision and rooted the same way, so if something gets messed up I can boot to thew other slot and not even notice.
tech_head said:
There is TWRP for OxygenOS 10.
Check the thread. It's a -70 release.
If you already have root you can flash TWRP then do a direct flash of Magisk.
I keep both my slots at the same OS revision and rooted the same way, so if something gets messed up I can boot to thew other slot and not even notice.
Click to expand...
Click to collapse
Oh I saw that and wasn't sure on it! Thanks man. And is there a tutorial to flash on both slots? And how do I check to know what firmware is on each slot?
TimmyLe7 said:
Oh I saw that and wasn't sure on it! Thanks man. And is there a tutorial to flash on both slots? And how do I check to know what firmware is on each slot?
Click to expand...
Click to collapse
I don't know of a tutorial.
The process I use is the following:
1. Download latest or firmware later than what you have installed. Youcannot use this method to roll back.
2. Local install. Don't reboot yet.
3. Install Magisk using the option to root after OTA upgrade in Magisk Manager.
4. Reboot.
5. You will now have the OS installed in the current booting slot.
6. Local install again. Yes, it fails. Local install again, it will work the second time. -> Don't reboot
7. Use Magisk Manager to flash TWRP. Do not reboot.
8. Using Magisk Manager, install Magisk into the current slot. When that is done, se the install after OTA option.
9. You can now reboot.
You can use TWP to switch slots if you like, but both slots now have same OS and are rooted.
tech_head said:
There is TWRP for OxygenOS 10.
Check the thread. It's a -70 release.
If you already have root you can flash TWRP then do a direct flash of Magisk.
I keep both my slots at the same OS revision and rooted the same way, so if something gets messed up I can boot to thew other slot and not even notice.
Click to expand...
Click to collapse
tech_head said:
I don't know of a tutorial.
The process I use is the following:
1. Download latest or firmware later than what you have installed. Youcannot use this method to roll back.
2. Local install. Don't reboot yet.
3. Install Magisk using the option to root after OTA upgrade in Magisk Manager.
4. Reboot.
5. You will now have the OS installed in the current booting slot.
6. Local install again. Yes, it fails. Local install again, it will work the second time. -> Don't reboot
7. Use Magisk Manager to flash TWRP. Do not reboot.
8. Using Magisk Manager, install Magisk into the current slot. When that is done, se the install after OTA option.
9. You can now reboot.
You can use TWP to switch slots if you like, but both slots now have same OS and are rooted.
Click to expand...
Click to collapse
Thanks for the help man! I just flashed TWRP -70 and I got everything up and running. Gonna do the second "boot" when I got some time. And to recap.. you just have two boots setup as a precaution right? I'm not doing too much with my rom except for viper and that's it!
After recently bricking my Oneplus 6 by trying to flash the latest TWRP on the latest Android 10 OTA from Oxygen Updater, I found a post from official TWRP explaining how root with a10 will take a while to implement due to changes that Google has made to their partitions.
So I guess for anyone trying this out on their own, be warned. You will probably end up bricking your device like I did and will probably end up having a bad time.
Please correct me if i'm wrong though, peace!
Edit: can confirm fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img from the other popular post is working!
If you already have a working TWRP on OOS 9 you should be fine as long as you flash a working TWRP afterwards. Blu_spark TWRP 9.101 is compatible (please not 9.101 no earlier version will work).
Also don't use Magisk 20 only 20.1.
There is already a pre-patched version out there. You can fastboot flash it (as fastboot boot doesn't work). An easier way (without a pre-patched version) is currently being worked one as you pointed out already
just updated to a10
boot into twrp, flash new bluspark twrp
flash FULL ota a10 image
reflash twrp
reboot into twrp
boot into system
boot back to twrp
install magisk 20.1
a10, twrp and root working
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
nightfury04 said:
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
Click to expand...
Click to collapse
havent lost data and you can root again
Blu_spark twrp
could you please provide link for blu_spark twrp img, zip files that work with android 10?
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
nightfury04 said:
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
Click to expand...
Click to collapse
nope
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
akri1337 said:
nope
Click to expand...
Click to collapse
It would be of great help if you could provide link to working TWRP with android 10.
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
akri1337 said:
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
Click to expand...
Click to collapse
Which build did u use mate? R108 is not working with android 9, I tried flashing it using my older installed twrp.
It says unsupported android version. And in github r108 says only for android 10.
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
akri1337 said:
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
Click to expand...
Click to collapse
Thanks again mate.. I will give this one a try.
there is a problem with Magisk 20.1, after all flashes the system is booting ok with Magisk working but after I give first program root access and rebooting its stuck on bootloader and not booting to system.
nightfury04 said:
Thanks again mate.. I will give this one a try.
Click to expand...
Click to collapse
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
nightfury04 said:
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
Click to expand...
Click to collapse
Which magisk? Ver 20.1 ?
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
GunFishin said:
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
Click to expand...
Click to collapse
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
chetbiz said:
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
Click to expand...
Click to collapse
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
GunFishin said:
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
Click to expand...
Click to collapse
Yes, you will need to flash twrp with adb and going through the hole process of installing twrp and magisk, but for me its not worked well, after first boot to Android Q with magisk 20.1 and granting some apps root access when I rebooted the phone its not booting to system and going to bootloader, I think its related to some problem with magisk 20.1.
Dears,
I have a OnePlus 6 unlocked and rooted with magisk and TRWP.
Currently I'm running stock firmware: oxygenos 10.3.
I got a message from system to update to 10.3.1.
Last time (when I have to update to 10.3) I tried to update in every way but without success and at the end I had to format everything and I lost my data.
So here is my question: which is the correct procedure to update software?
Thanks!
Look in TWRP and Root for OnePlus 6 on Oxygen OS 10 Stable/Beta thread
So you need to download latest Oxygen zip which is 042 buil if I'm not wrong...put it on your phone if you already didn't done that...then reboot to TWRP...and here starts the procedure....I HIGHLY RECCOMEND TO DO A WIPE WITHOUT FORMATTING INTERNAL STORAGE ONLY DATA...FOR AVOIDING ISSUES...but you can go without it...so here we start
Boot into twrp
Flash oxygen os zip(latest)
Flash twrp
Reboot to twrp(if it says no os installed just ignore it and swipe reboot anyway)
Flash magisk
and your done...thats it...nothing could go wrong.... I'm always doing it this way....
ilpratti said:
Dears,
I have a OnePlus 6 unlocked and rooted with magisk and TRWP.
Currently I'm running stock firmware: oxygenos 10.3.
I got a message from system to update to 10.3.1.
Last time (when I have to update to 10.3) I tried to update in every way but without success and at the end I had to format everything and I lost my data.
So here is my question: which is the correct procedure to update software?
Thanks!
Click to expand...
Click to collapse
For me, the phone downloaded the whole package instead of just the little OTA. I let it install it, bit did not let it restart it. Then I went to magisk modules and installed "twrp-keep". Then in magisk manager I had it install magisk on the other slot. Then I restarted the phone. Everything worked great.
tabletalker7 said:
For me, the phone downloaded the whole package instead of just the little OTA. I let it install it, bit did not let it restart it. Then I went to magisk modules and installed "twrp-keep". Then in magisk manager I had it install magisk on the other slot. Then I restarted the phone. Everything worked great.
Click to expand...
Click to collapse
Try this method... im also done my update like this!
my way of doing it
Here's what i did and it didn't took me long at all i'm a newbie
I unroot my phone via magisk
install os 10.3.1 then flash twrp and root my phone again.
Dears,
Thanks for the replay.
I forgot that I was without TWRP.
What I did, and it worked, is:
- uninstall magisk manager by magisk
- install full update
- reboot
- flash by fastboot boot.img patched by magisk.
Thanks again