DP3 Black Screen - OnePlus 7 Pro Questions & Answers

I've done a lot of searching but can't seem to find anyone posting about the issue I'm having with DP3 on my 7 Pro. I'm stock on 9.5.10. the flash using local update works fine. Upon reboot, the phone will work for a few seconds, once a while it works for a couple of minutes. Then the screen goes black. If I hit the power button twice, I get a reboot dialog box. I restart and the process starts all over. I went back to 9.5.9 and everything is fine. I tried again going from 9.5.9 to DP3 after a full format. Same thing happens. I suspect the UI is stopping but it just goes black.
Anyone have any ideas?

Just wanted to chime in to say the same thing is happening to me.

Mike02z said:
I've done a lot of searching but can't seem to find anyone posting about the issue I'm having with DP3 on my 7 Pro. I'm stock on 9.5.10. the flash using local update works fine. Upon reboot, the phone will work for a few seconds, once a while it works for a couple of minutes. Then the screen goes black. If I hit the power button twice, I get a reboot dialog box. I restart and the process starts all over. I went back to 9.5.9 and everything is fine. I tried again going from 9.5.9 to DP3 after a full format. Same thing happens. I suspect the UI is stopping but it just goes black.
Anyone have any ideas?
Click to expand...
Click to collapse
You need to downgrade in twrp to 9.5.7 then update your phone to dp3 and everything will be grate. I was on dp 3 till I wanted to try out omni ROM witch is grate but there is more customization on dp3 then any ROM for this phone so go ahead and downgrade and then update to dp3. The region it will not update to dp3 is because its build number is lower then 9.5.10 ok

The challenge is downgrading. Can't install TWRP because I get the error when I try to boot it via fasboot. I can't get to the local upgrade option in settings to install the downgrade zip that OnePlus provides, and I can't fastboot an old version because I get a var error. Any suggestions?

NickMidd91 said:
You need to downgrade in twrp to 9.5.7 then update your phone to dp3 and everything will be grate. I was on dp 3 till I wanted to try out omni ROM witch is grate but there is more customization on dp3 then any ROM for this phone so go ahead and downgrade and then update to dp3. The region it will not update to dp3 is because its build number is lower then 9.5.10 ok
Click to expand...
Click to collapse
Thanks. I tried this and while not as frequent, system UI crashes continue. When I went to bed it was fine. After 5 minutes use this AM, it started going black again. I'm going to wait for the next release before testing again.
Odd that only 2 have reported this here. If it helps, I have 2 SIMS both on Verizon Wireless.

Apparently this is a known issue. Bug has been reported to OnePlus.

Related

[Completed] Can't get past update screen

So I did a clean update to the latest stable release of http://forum.xda-developers.com/showthread.php?t=2716306
The install went fine, and I checked my connection and everything. After I did that, I came across an OTA update that I couldn't skip. So I download the 600+mb update, and my phone goes into recovery. After that, I can't do anything, so I reboot it. Again, it takes me to the update screen, but now I can't even download it. It just stays at that screen.
Okay, I don't know what is going on anymore. I've tried another ROM, and it's the same thing. It just points me to that update screen and I can't do anything beyond that! What is going on?!
Edit: Holy ****, I can't even get into recovery now that I flashed a stock ROM. What am I supposed to do at this point?
Nedy08 said:
So I did a clean update to the latest stable release of http://forum.xda-developers.com/showthread.php?t=2716306
The install went fine, and I checked my connection and everything. After I did that, I came across an OTA update that I couldn't skip. So I download the 600+mb update, and my phone goes into recovery. After that, I can't do anything, so I reboot it. Again, it takes me to the update screen, but now I can't even download it. It just stays at that screen.
Click to expand...
Click to collapse
Hi, thank you for using XDA assist.
There is a general forum for android here https://forum.xda-developers.com/android/help where you can get better help and support if you try to ask over there.
Good luck

Update Issue?

Just wondering if anyone had a fix or explanation for my situation. I Received an update on the Blu Vivo 5R this Friday, Android 7.0. Then in the process today of unlocking the bootloader and flashing twrp, it got screwed up. so I downloaded the stock rom and flashed it, no biggie. fixed the boot freeze issue. but now I'm back to 6.0 because that was the most up-to-date stock rom. I tried checking for updates, supposedly I'm up to date. I even called Blu support to see if they could push it to my IMEI or something with no luck. they said they release it in batches and the software team deals with that, anyone know a way I could resolve this
You can try manually setting the date ahead a few days and reboot, sometimes that will bring an update.
Char_G said:
You can try manually setting the date ahead a few days and reboot, sometimes that will bring an update.
Click to expand...
Click to collapse
Didn't do anything, thanks for the quick response though.

Bootloop after installing Xposed on Oreo, Bit of help would be appreciated.

After searching around and not being 100% sure on how I should go about fixing this particular bootloop I decided to post a thread. Bootloader unlocked, phone unlocked, FRP unlocked, and TWRP installed. Can't seem to get the phone recognized when plugged in no matter where I'm at and hisuite recovery doesn't work, nor does the erecovery or whatever it's called. I had the phone running just fine with supersu but after installing my usual Xposed/Busybox and rebooting I got caught in a bootloop. (might have been caused by being on Oreo and having some problems with a version made for Nougat or something). I've seen there are various ways to exit the loop and at this point I'd be open to any but I do notice some posts saying they almost bricked their phone while doing so. Currently on my microSD I've got a hwota update I was going to try to use. I've got no backups in TWRP either because I'm irresponsible (my fault). What can I do to just wipe the phone, reinstall any version of android and get back to where I was at. I'm a little new to this as I've only ever rooted my tablet. Thanks for the help and all the info I've taken from this forum before and hopefully now. Forgot to mention I don't know my full device number only MHA-L29 in the US.
Ok Well after laying in bed and thinking about it I wound up running HWOTA8 from TWRP since I could access that. Seemed to just bring me back to eRecovery, and I factory reset my phone. I'll reinstall TWRP and flash supersu then make a backup and try again. Not sure what happened but I seemed to be in a pretty good spot since I could access TWRP even though my phone wouldn't show up on my computer while in fastboot/Recovery mode.
edit: oh I got a new problem now. I'm on testkeys firmware, camera, sim, and bluetooth work but I can't update from 7 back to 8. I'll do more testing around before bothering to unlock bootloader or install TWRP.
I've been trying to follow the guide in this thread but to no avail. I just get software install failed and then I have to start again.
Well another day of searching google and XDA trying to figure out guides and I don't think I'm any closer to a solution to getting off test-keys. Some seem to suggest that you need to go back to MM, some suggest running HWOTA, some suggest the three button recovery and others say that won't work at all. I'm not sure I've ever felt this confused haha. I'll keep at it but there has to be some way to get to a build that has the updater on it since that's all I seem to be lacking to get off test-keys. I can even search the settings for the updater but when you press it nothing happens. It's like they completely removed any sort of updating this build can do.
KittyCat5eUTP said:
Well another day of searching google and XDA trying to figure out guides and I don't think I'm any closer to a solution to getting off test-keys. Some seem to suggest that you need to go back to MM, some suggest running HWOTA, some suggest the three button recovery and others say that won't work at all. I'm not sure I've ever felt this confused haha. I'll keep at it but there has to be some way to get to a build that has the updater on it since that's all I seem to be lacking to get off test-keys. I can even search the settings for the updater but when you press it nothing happens. It's like they completely removed any sort of updating this build can do.
Click to expand...
Click to collapse
What is your full build number? Please, post screenshot.
5[Strogino] said:
What is your full build number? Please, post screenshot.
Click to expand...
Click to collapse
Model: MHA-L29
Build: NRD90M test-keys
EMUI version: 5.0.1
Android version: 7.0
I believe I was originally on some variant of MHA-L29C567 since I'm US based and its the dual sim version
I've tried using HWOTA a few times to either upgrade/update or rebrand and no matter what I choose when my phone restarts to install I just get software install failed. Usually I'll have to run through first time setup again. I've read that some people said this particular issue had to do with the update zips but mine seem to be named correctly so all I can think of doing is getting another firmware and trying again with that.
haha okay so I found out I was putting the update zips in the wrong folder. I fixed that and re ran HWOTA. update started/finished and my phone started booting and restarting a lot then went into erecovery. I'm downloading the update package right now and it's slow as hell but it's moving. And that failed leaving me to boot a few times and then get back to erecovery. I'll try getting into fastboot or recovery.
Edit: Well that seems to have resolved itself now. After having the erecovery fail I wiped/factory reset and booted the phone into oreo 8.0.0.321 with all the apps and updater. Thanks to everyone who dropped in and I'll be getting emails if someone replies that needs help too. I'm not very knowledgeable but I can give it a shot.

Gyroscope and Proximity Sensor not working

Hi Team,
On the latest OOS 10.3.2. Have done multiple resets, downgraded using msm tool to OOS 5.1.3 and then manually updating them. Factory reset done a couple of times.
Anyone can help?
Currently running Magisk 20.4, bootloader unlocked.
Same here
I even tried using msmtool and even installing custom rom still no luck in fixing this issue . Most irritating part about this is not able to use auto rotate .
Possible Fix
Hey! I made an account today to hopefully help youins. I was also struggling with this issue, and I couldn't find anyone with a working solution. After trying resets and full msm tool restores of different android versions (I tried the standard 5.1.5, 9.0.0, and 10.3.2), I figured out my issue and fixed it.
For me, I would do an msm to android 8 (5.1.5). This is the link on the main forum for " [TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" by Fivegates. (I would link it, but I don't know if that's allowed or not.) After doing the reset, Everything worked! However, after letting the phone update to 9.0.9 by it's self with the update tool in settings, I would lose the ability to use wifi. After forcing the next update to 10.3.2, I would lose the gyro and Prox sensor again. I then tried the msm tool from a different site that went straight to 10.3.2 ... No dice. Same issue. So, I figured that the phone needed one of the updates between 5.1.5 and 9.0.9. I started trying some updates between, and here was my final process to get back up and running! (it took a while. haha)
FIX
1. MSM tool to 5.1.5 by following the MsmDownloadTool post from fivegates. (This will wipe all data and re-lock bootloader.)
2. After phone boots, run through set-up, but don't let phone update.
3. Download the full OTA for Oneplus 6, version 9.0.0. It can be found in an xda post, or elsewhere. Again, don't know if I can link anything.)
4. Put the zip on your Oneplus and use the updater in settings to preform an update from local storage. (You tap the top right corner menu and select local upgrade.)
5. Once updated to 9.0.0, let the phone do the next two updates. At the time of this guide, the first will be to 9.0.9 , and the second to 10.3.2.
6. After that, I had a working gyro and Prox sensor on 10.3.2. From there, I unlocked the bootloader, booted twrp, and carried on my rom installs like normal.
I hope this helps!
oldmanz said:
Hey! I made an account today to hopefully help youins. I was also struggling with this issue, and I couldn't find anyone with a working solution. After trying resets and full msm tool restores of different android versions (I tried the standard 5.1.5, 9.0.0, and 10.3.2), I figured out my issue and fixed it.
For me, I would do an msm to android 8 (5.1.5). This is the link on the main forum for " [TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" by Fivegates. (I would link it, but I don't know if that's allowed or not.) After doing the reset, Everything worked! However, after letting the phone update to 9.0.9 by it's self with the update tool in settings, I would lose the ability to use wifi. After forcing the next update to 10.3.2, I would lose the gyro and Prox sensor again. I then tried the msm tool from a different site that went straight to 10.3.2 ... No dice. Same issue. So, I figured that the phone needed one of the updates between 5.1.5 and 9.0.9. I started trying some updates between, and here was my final process to get back up and running! (it took a while. haha)
FIX
1. MSM tool to 5.1.5 by following the MsmDownloadTool post from fivegates. (This will wipe all data and re-lock bootloader.)
2. After phone boots, run through set-up, but don't let phone update.
3. Download the full OTA for Oneplus 6, version 9.0.0. It can be found in an xda post, or elsewhere. Again, don't know if I can link anything.)
4. Put the zip on your Oneplus and use the updater in settings to preform an update from local storage. (You tap the top right corner menu and select local upgrade.)
5. Once updated to 9.0.0, let the phone do the next two updates. At the time of this guide, the first will be to 9.0.9 , and the second to 10.3.2.
6. After that, I had a working gyro and Prox sensor on 10.3.2. From there, I unlocked the bootloader, booted twrp, and carried on my rom installs like normal.
I hope this helps!
Click to expand...
Click to collapse
your the best man i can finally use other ROMs again
my fix was to use oneplus 7 port on my 6 but it was annyoing me
oldmanz said:
Possible Fix
Hey! I made an account today to hopefully help youins. I was also struggling with this issue, and I couldn't find anyone with a working solution. After trying resets and full msm tool restores of different android versions (I tried the standard 5.1.5, 9.0.0, and 10.3.2), I figured out my issue and fixed it.
For me, I would do an msm to android 8 (5.1.5). This is the link on the main forum for " [TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" by Fivegates. (I would link it, but I don't know if that's allowed or not.) After doing the reset, Everything worked! However, after letting the phone update to 9.0.9 by it's self with the update tool in settings, I would lose the ability to use wifi. After forcing the next update to 10.3.2, I would lose the gyro and Prox sensor again. I then tried the msm tool from a different site that went straight to 10.3.2 ... No dice. Same issue. So, I figured that the phone needed one of the updates between 5.1.5 and 9.0.9. I started trying some updates between, and here was my final process to get back up and running! (it took a while. haha)
FIX
1. MSM tool to 5.1.5 by following the MsmDownloadTool post from fivegates. (This will wipe all data and re-lock bootloader.)
2. After phone boots, run through set-up, but don't let phone update.
3. Download the full OTA for Oneplus 6, version 9.0.0. It can be found in an xda post, or elsewhere. Again, don't know if I can link anything.)
4. Put the zip on your Oneplus and use the updater in settings to preform an update from local storage. (You tap the top right corner menu and select local upgrade.)
5. Once updated to 9.0.0, let the phone do the next two updates. At the time of this guide, the first will be to 9.0.9 , and the second to 10.3.2.
6. After that, I had a working gyro and Prox sensor on 10.3.2. From there, I unlocked the bootloader, booted twrp, and carried on my rom installs like normal.
I hope this helps!
Click to expand...
Click to collapse
Thank you kind person. For more than two months I tried to return the phone to normal operation and all to no avail. So I came across your post and now my phone is full again. Thank you very much.
oldmanz said:
Possible Fix
Hey! I made an account today to hopefully help youins. I was also struggling with this issue, and I couldn't find anyone with a working solution. After trying resets and full msm tool restores of different android versions (I tried the standard 5.1.5, 9.0.0, and 10.3.2), I figured out my issue and fixed it.
For me, I would do an msm to android 8 (5.1.5). This is the link on the main forum for " [TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" by Fivegates. (I would link it, but I don't know if that's allowed or not.) After doing the reset, Everything worked! However, after letting the phone update to 9.0.9 by it's self with the update tool in settings, I would lose the ability to use wifi. After forcing the next update to 10.3.2, I would lose the gyro and Prox sensor again. I then tried the msm tool from a different site that went straight to 10.3.2 ... No dice. Same issue. So, I figured that the phone needed one of the updates between 5.1.5 and 9.0.9. I started trying some updates between, and here was my final process to get back up and running! (it took a while. haha)
FIX
1. MSM tool to 5.1.5 by following the MsmDownloadTool post from fivegates. (This will wipe all data and re-lock bootloader.)
2. After phone boots, run through set-up, but don't let phone update.
3. Download the full OTA for Oneplus 6, version 9.0.0. It can be found in an xda post, or elsewhere. Again, don't know if I can link anything.)
4. Put the zip on your Oneplus and use the updater in settings to preform an update from local storage. (You tap the top right corner menu and select local upgrade.)
5. Once updated to 9.0.0, let the phone do the next two updates. At the time of this guide, the first will be to 9.0.9 , and the second to 10.3.2.
6. After that, I had a working gyro and Prox sensor on 10.3.2. From there, I unlocked the bootloader, booted twrp, and carried on my rom installs like normal.
I hope this helps!
Click to expand...
Click to collapse
Thanks a lot man !!!!
Following your steps, the automatic brightness and also the automatic screen rotation works for me again.
Thank you @oldmanz

Lineage 17.1 is available now

So this morning I went to check on lineage OS news oh, and I found out that they released today for all pixels. I am running it with no issues although I would recommend to download the micro gapps package cuz if you do the Nano or anything below it will give you issues with your phone reading SIM card. Aside from that I had successfully running the rom with magisk installed.
Which versions of gapps did you try? Only nano/micro? I was thinking of selecting pico. Also, can you update via their in house ROM updater app while rooted?
Sent from my Pixel 4 XL using XDA Labs
bradical711 said:
Which versions of gapps did you try? Only nano/micro? I was thinking of selecting pico. Also, can you update via their in house ROM updater app while rooted?
Sent from my Pixel 4 XL using XDA Labs
Click to expand...
Click to collapse
Will there still wait to check to see if the updater works but it looks like everything is fully functional within it and right now, take a look at the picture that I'm going to attach to this that is her updater and it looks like it is completely 100% functional but I cannot be sure because there is no updates to test it with.
As far as the gapps go, don't use anything smaller than micro. There is something pixel 4 needs in telephony to work that is in micro+ but not in nano or pico ... If you flash rom without gapps , your phone will work to make calls, if you flash any gapps before micro, you will get a " insert SIM, emergency calls only " message.
After you flash rom, MAKE SURE TO REBOOT AND THEN FLASH GAPPS,! otherwise if you try to do it in the same session that you flashed ramen you will get a message telling you that you have insufficient storage to flash and it will fail to flash gapps!
A few things that I wish and I hope they do fix would be the 90 hertz implementation switch as of now there is no switch for it and the screen flickers at low brightness.
Soli gestures would be great, I know DU has them working so it's a matter of time before lineage does as well.... Same goes with the squeeze for assistant,.... It is also not working ..
Not working :
Soli gestures
Squeeze
Smooth display
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there
i42o said:
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there
Click to expand...
Click to collapse
Thank you for the detailed response!! I greatly appreciate all the info and I'm sure others will as well!:highfive: I will probably try it when the ROM becomes more stable. Currently on DU myself and I don't mind waiting until the project improves further. Would you mind letting us know in the thread how your first update goes while rooted? Thank you again for trying the legendary ROM and letting us know it was released!
Sent from my Pixel 4 XL using XDA Labs
bradical711 said:
Thank you for the detailed response!! I greatly appreciate all the info and I'm sure others will as well!:highfive: I will probably try it when the ROM becomes more stable. Currently on DU myself and I don't mind waiting until the project improves further. Would you mind letting us know in the thread how your first update goes while rooted? Thank you again for trying the legendary ROM and letting us know it was released!
Sent from my Pixel 4 XL using XDA Labs
Click to expand...
Click to collapse
Yeah, so after I installed it and set it up, I then adb sideloaded magisk canary on its stock kernel, it went thru like knife thru butter.
I then rebooted into android, finalized the magisk set up, rebooted and voila... I was rooted.... I then tried Kiri Kernel, since it has the necessary things for TWRP, flashed it within ex kernel and then tried to boot TWRP in bootloader only to get stuck on TWRP splash screen...
I was honestly trying to have lineage working with a working TWRP but unfortunately it did not work as such. So I gave up on the TWRP and I've been running the ROM with magic and modules installed with no hiccups The boot time is amazing battery life is really really good...
Viper worked first try... This has has to be one of three good roms out there with little to no issues.
DU
PIXEL DUST ( CAF )
LINEAGE
i42o said:
Yeah, so after I installed it and set it up, I then adb sideloaded magisk canary on its stock kernel, it went thru like knife thru butter.
I then rebooted into android, finalized the magisk set up, rebooted and voila... I was rooted.... I then tried Kiri Kernel, since it has the necessary things for TWRP, flashed it within ex kernel and then tried to boot TWRP in bootloader only to get stuck on TWRP splash screen...
I was honestly trying to have lineage working with a working TWRP but unfortunately it did not work as such. So I gave up on the TWRP and I've been running the ROM with magic and modules installed with no hiccups The boot time is amazing battery life is really really good...
Viper worked first try... This has has to be one of three good roms out there with little to no issues.
DU
PIXEL DUST ( CAF )
LINEAGE
Click to expand...
Click to collapse
Is 90hz working??
ahoslc said:
Is 90hz working??
Click to expand...
Click to collapse
Read just one or two more posts above the one you quoted to find your answer.
bradical711 said:
Read just one or two more posts above the one you quoted to find your answer.
Click to expand...
Click to collapse
Smooth display is auto switching between 60hz and 90hz that's why I asked if just 90hz was working
i42o said:
Will there still wait to check to see if the updater works but it looks like everything is fully functional within it and right now, take a look at the picture that I'm going to attach to this that is her updater and it looks like it is completely 100% functional but I cannot be sure because there is no updates to test it with.
As far as the gapps go, don't use anything smaller than micro. There is something pixel 4 needs in telephony to work that is in micro+ but not in nano or pico ... If you flash rom without gapps , your phone will work to make calls, if you flash any gapps before micro, you will get a " insert SIM, emergency calls only " message.
After you flash rom, MAKE SURE TO REBOOT AND THEN FLASH GAPPS,! otherwise if you try to do it in the same session that you flashed ramen you will get a message telling you that you have insufficient storage to flash and it will fail to flash gapps!
A few things that I wish and I hope they do fix would be the 90 hertz implementation switch as of now there is no switch for it and the screen flickers at low brightness.
Soli gestures would be great, I know DU has them working so it's a matter of time before lineage does as well.... Same goes with the squeeze for assistant,.... It is also not working ..
Not working :
Soli gestures
Squeeze
Smooth display
this is the first release so I did expect it to not be fully fully functional but I know that within time it will be one of the best roms out there
Click to expand...
Click to collapse
90hz works, 70% plus brightness on coral gives 90hz, below is 60hz. flame has some different tunings percentage wise, but same concept.
RefreshRate will work as soon as we have an official R image I can steal a single APK from.
We won't be implementing Squeeze or Soli most likely - it's RE, and given scrutiy over large projects and reverse engineered code, we likely won't see it unless it's reimplemented OSS (DU reverse-engineered it, but didn't clean room re-implement).
ahoslc said:
Smooth display is auto switching between 60hz and 90hz that's why I asked if just 90hz was working
Click to expand...
Click to collapse
It works.
ok well i went back to stock aug firmware and then flashed the img file, then sideloaded the rom, rebooted right into recovery and flashed gapps ... stuck on the lineage boot animation .. do i need to let it boot up then reboot into recovery and flash gapps?
tried again, flashed the image then rebooted to start menu, rebooted to recovery and flash mini gapps and rebooted ... still stuck on the boot logo
what am i missing?
somehow i got it to boot and had a trebucket error, installed a different launcher - FIXED.
can not finish setup, keep getting data transfer crash
anyone get TWRP to load? im using fsociety kernel and it worked on another ROM
Madjax2020 said:
ok well i went back to stock aug firmware and then flashed the img file, then sideloaded the rom, rebooted right into recovery and flashed gapps ... stuck on the lineage boot animation .. do i need to let it boot up then reboot into recovery and flash gapps?
tried again, flashed the image then rebooted to start menu, rebooted to recovery and flash mini gapps and rebooted ... still stuck on the boot logo
what am i missing?
somehow i got it to boot and had a trebucket error, installed a different launcher - FIXED.
can not finish setup, keep getting data transfer crash
anyone get TWRP to load? im using fsociety kernel and it worked on another ROM
Click to expand...
Click to collapse
You're going to have to skip that by disabling the app when it force closes . It should let you proceed from there on. TWRP won't work and idk why... Trebuchet launcher will FC as well but since Google home launcher is installed via gapps it should be a fail safe. As far as kernel, I am running kirisakura and it has the necessary things to work with TWRP but I won't. Trust me I tried.... Make sure to root with magisk canary .
To fix cts mismatch in magisk download termux
SU
props
And select option 2 forced basic key attestation
Select y for yes and proceed... Reboot and you should pass safety net checks...
Hit thanks if I helped .. one love
i42o said:
You're going to have to skip that by disabling the app when it force closes . It should let you proceed from there on. TWRP won't work and idk why... Trebuchet launcher will FC as well but since Google home launcher is installed via gapps it should be a fail safe. As far as kernel, I am running kirisakura and it has the necessary things to work with TWRP but I won't. Trust me I tried.... Make sure to root with magisk canary .
To fix cts mismatch in magisk download termux
SU
props
And select option 2 forced basic key attestation
Select y for yes and proceed... Reboot and you should pass safety net checks...
Hit thanks if I helped .. one love
Click to expand...
Click to collapse
thank you sir for the reply. However i could not get it to be stable. The initial setup failed no matter what i tried. The error of data tansfer tool would fail. I want to run this as it seemed very smooth, however i think i need to wait for another update or something. i followed the OP to the t and nothing seemed to work properly for me.
I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.
npjohnson said:
I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.
Click to expand...
Click to collapse
I'll try again thanks for the info
Seems the wiki says you can sideload gapps right after sideloading the OS, the OP said doing that causes issues lol. But he'll I'll try it anyway
npjohnson said:
I use this daily, and am entirely unsure what you're doing here.
Are you using the wiki guide? If not, follow that to the tee, use nano opengapps preferably, and everything works like a charm.
Click to expand...
Click to collapse
Got this running great, with gapps. Was wondering if you're getting the issue I am with google assistant. It seems to freeze up and not be usable.
followed the wiki directions and used full gapps not nano ( missed that 1 bit of info ) im STILL getting data tansfer tool keps stopping when trying to finish the setup going to try a reboot and see what happens. it shows just a sec then saying looing for updates then installing updates and crashes ... then back t connect to wifi . does this have to do with the gapps?
SO ODD ... reflashed and used nano. asked to connecto to mobile data, nothing as showing up, hit skip, tried wifi and nada .... hit skip then same damn error for setup .... insane. maybe ill just cancel the setup and do everything manually
retied all steps and got the no space error when doing gapps, switched to slot b and tried again and it worked ... waiting to see the data tansfer error ... i dont think my phone wants to play nice lately, or ever.
went back to stock firmware, loaded the 9/6 lineageos and have NO mobile data with nano gapps loaded. doing the update currently and will update shortly what happens
i can officially state i am up and running with so far NO issues, i have mobile data, wifi sent texts and made a call. now going to root and swiftbackup restore all my apps and blah blah
Anyone tried the new 13th nightly? Hopefully they fixed the screen flicker.
Madjax2020 said:
followed the wiki directions and used full gapps not nano ( missed that 1 bit of info ) im STILL getting data tansfer tool keps stopping when trying to finish the setup going to try a reboot and see what happens. it shows just a sec then saying looing for updates then installing updates and crashes ... then back t connect to wifi . does this have to do with the gapps?
SO ODD ... reflashed and used nano. asked to connecto to mobile data, nothing as showing up, hit skip, tried wifi and nada .... hit skip then same damn error for setup .... insane. maybe ill just cancel the setup and do everything manually
retied all steps and got the no space error when doing gapps, switched to slot b and tried again and it worked ... waiting to see the data tansfer error ... i dont think my phone wants to play nice lately, or ever.
went back to stock firmware, loaded the 9/6 lineageos and have NO mobile data with nano gapps loaded. doing the update currently and will update shortly what happens
i can officially state i am up and running with so far NO issues, i have mobile data, wifi sent texts and made a call. now going to root and swiftbackup restore all my apps and blah blah
Click to expand...
Click to collapse
You do remember I said micro right? I specifically explained that by using nano you would have no cell phone connectivity and upon transfer tool just put no transfer
XMayhem2099 said:
Anyone tried the new 13th nightly? Hopefully they fixed the screen flicker.
Click to expand...
Click to collapse
Yes it is still there but much less now
Face unlock working?

Categories

Resources