Guys, I have an idea, but I don't understand that in the world tasker .. Then I have a px3 7.1 2gb kld, with the latest version of the malaysk firmware. My unit has the usb dashcam (which I mounted) and it works. From the factory settings I can set the dashcam as analog instead of usb but it doesn't work by mounting the camera on the av cable(front camera app is activate) The image can be seen if I open the application av in .. Then I plan to install a front parking camera but I don't know how to switch the signal .. I plan to use the rear parking camera input (canbus) that I mounted .. And that when the reverse gear is removed, then the mtcbackview application is closed the av application is opened in maybe until reaching a certain speed (gps) I believe with tasker you can do but I don't understand anything in writing that file .. Quache buon friend who can help me ?? Thank you
Related
I run malaysk rom 4.4.4 and have a USB dvr camera installed.
I cannot find a app which works fine and what i want.
It should do the following:
- start on bootup radio
- option to go to automaticly to background and start recording automaticly
- option to choose storage location
Tried a lot of apps only one does this but the app constanlty crashes when i open the settings menu (autoboy BlackBox).
When i run the app on my table (lolipop) it works fine, but on my rk3388 mtcb radio (with latest malaysk rom) it crashes when opening setting menu to configure it.
Anyone have an idea which app can do this
I too would like recommendations for my MX (Witson) unit as currently the stock DVR records to the internal 16gb despite having a 4gb in GPS slot and 32gb in 2nd slot. The app has no option to select storage. Very annoying as finishes all the space up and slows unit down.
Thanks
I run Dailyroads Voyager.
https://play.google.com/store/apps/details?id=com.dailyroads.v&hl=en
You may have to use the PCV Startup Builder to put an entry in to start it up automatically on boot.
https://play.google.com/store/apps/details?id=com.pcv.installrecovery.builder&hl=en
I have it starting automatically, in the background, set storage to the GPS card, and it works fine with every USB cam I have ever tried it with.
I use AutoBoy https://play.google.com/store/apps/details?id=com.happyconz.blackbox&hl=en its the only on I've found that lets you flip the camera 180 for when you have it mounted on the windscreen. It starts on boot, monitors the front camera and location via GPS, it also has youtube upload.
karmacop said:
I use AutoBoy https://play.google.com/store/apps/details?id=com.happyconz.blackbox&hl=en its the only on I've found that lets you flip the camera 180 for when you have it mounted on the windscreen. It starts on boot, monitors the front camera and location via GPS, it also has youtube upload.
Click to expand...
Click to collapse
This app does not work on my device, thats is why i started this topic.
When i start this app i and i open the settings menu it crashes, cannot get it to work normally.
karmacop said:
I use AutoBoy https://play.google.com/store/apps/details?id=com.happyconz.blackbox&hl=en its the only on I've found that lets you flip the camera 180 for when you have it mounted on the windscreen. It starts on boot, monitors the front camera and location via GPS, it also has youtube upload.
Click to expand...
Click to collapse
Aaaahhh tried on phone like i do before trying on head unit like i always do and can't save to either SD card on the MTCD! Gives me option on phone Galaxy S7. Frustrated as seemed like the best one
Which camera do you use exactly? I hope I will soon receive the new MTCD unit for Peugeot 508 (WITSON) and I am also thinking of purchasing the DVR camera but can't decide what type shall I buy. There is not much information about the available cameras on internet, not many videos on youtube etc., almost no posts here on the forum.
Does someone have the Joying HD SONY IMX322... camera? They say in the description it will only work with JOYING head unit. Is it true? Does it require any special app that is available only in their ROM? According to the pictures it has SD card slot so I think it stores the files on this card, not in the head unit??? So it should start recording after connecting to any USB charger like any other camera?
Or is any other USB or so called webcam better? There are plenty of them like Genius and so on...
Thanks for comments.
Could you help me to identify my software, please?
Hello, everybody,
I bought my Peugeot 508 SW with installed DVR and I can't find out, what software is installed, there? I would like to update maps into my iGO at least. But I can't find any input for SD card. Probably, it is hidden somewhere into its body... But, I am not sure, because of I can't identify it, so far.
Could you help me to identify my software, please?
It is HMI: MX010.1.1, MCU Version "MX801.151211(54)", "MMP.2015.9.16.14.2", whatever does it mean?
Thank you very much.
Yco said:
Could you help me to identify my software, please?
Hello, everybody,
I bought my Peugeot 508 SW with installed DVR and I can't find out, what software is installed, there? I would like to update maps into my iGO at least. But I can't find any input for SD card. Probably, it is hidden somewhere into its body... But, I am not sure, because of I can't identify it, so far.
Could you help me to identify my software, please?
It is HMI: MX010.1.1, MCU Version "MX801.151211(54)", "MMP.2015.9.16.14.2", whatever does it mean?
Thank you very much.
Click to expand...
Click to collapse
Could you identify your software? Or the brand? I have the same problem
I'm looking for an app that can auto record. And also do much more than the default DVR.
DVR
You have answered yourself (and me) in Malaysk PX5 thread
For anyone that used search to get here:
Most 3rd party DVR apps just do not work (are for mobiles and tablets, not for car Units), I have tried many with different results.
The stock app is very basic but it can autorecord every X minutes, just leave it to record and it will stop/start when you stop/start your car. If the Unit reboots, just press record in the DVR app again (or use a tasker).
The stock DVR needs some rework to add these options (see here):
Hervidero said:
- delete files size based (SD card size specify x Gb)
- delete files time based (older than x days)
- mark important files "never delete" (like accident recordings)
Click to expand...
Click to collapse
UPD: 19-09-2017
I found out recently that the stock DVR app automatically deletes the oldest recordings on the selected memory card when there is less than 150MB free space left on the card.
A bit crude but it seems to work.
I use the 2nd SD slot on my Unit for the CarRecorder. So it has 32Gb for itself.
It took a while to get near full and for me to see that it actually does delete files
Only thing that is still missing (IMO) in this app is the option to mark files 'Important' and never delete, but if you move out those files to another folder (outside /CarRecorder/) then the app does not touch them.
Additional note: the stock DVR app only seems to supports the DVR USB camera devices that can be ordered together with the units. In other words: does likely not support regular PC USB camera's.
what hardware DVR are you using?
are you using USB DVR?
what is the name of the STOCK DVR app are you referring?
thank you
Maybe you can try this one.
https://drive.google.com/file/d/0ByRpKQtVEWPNUEVEYnNmRFJqRWRFaERmNVNuVlE1SEdyT3pz/view?usp=drivesdk
It came with my dashcam:
Car DVR Camera USB DVR Camera for Android 4.2 / 4.4 / 5.1.1/6.0.1 Car PC
http://s.aliexpress.com/3MjERvI7
(from AliExpress Android)
im using following cam as DVR Frontcam (installed near my front-spoiler).
https://de.aliexpress.com/item/Mini...lgo_pvid=af7a6805-e1e9-4c17-8bae-4baec93f642e
pro:
damn cheap, 3$
solid quality, good enough for everything in front of the car
contra:
manual focus
no outdoor guarantee. if using outside, after a shower, you have to wait until water is drying
quality like 480P, no high quality
I have buy a USB camera on aliexpress ...
The HU dvr app work fine but the image is reverse... I can't set the normal view..
If I use the camera on my phone work correctly ...[emoji34]
Inviato dal mio HTC 10 utilizzando Tapatalk
Post Moved to new thread about dual camera dvr
Hervidero said:
For anyone that used search to get here:
Most 3rd party DVR apps just do not work (are for mobiles and tablets, not for car Units), I have tried many with different results.
The stock app is very basic but it can autorecord every X minutes, just leave it to record and it will stop/start when you stop/start your car. If the Unit reboots, just press record in the DVR app again (or use a tasker).
Click to expand...
Click to collapse
Would you be good enough to tell me the exact tasker command required to start the recording that you mention please?
Can someone reupload the built in apk of the application DVR Assistant?
My car's dash cam didn't come with the app built in.
tharwat96 said:
Can someone reupload the built in apk of the application DVR Assistant?
My car's dash cam didn't come with the app built in.
Click to expand...
Click to collapse
It is built in, you need to enable it in Factory Settings:
Settings > Car > Factory Settings > Password '126'
The first page lists built in apps that can be enabled for your hardware. I think the option is called DVR and you can select USB from the drop-down list.
Hi everyone. I have a slightly different unit to yours in that it doesn't have the DVR option in the factory settings. I bought a small camera which plugs into the Aux video in in the back of the unit (not the reverse cam signal, but same plug). the cam and HU work together when I open the AUX app which came pre-loaded in the HU. However I can't seem to find any way to make it record. All other android apps won't work as they don't look for a cam signal coming from the Aux port.
Does anyone know any apps that would use the AUX signal?
I don’t think there is any app that can do that. As a compromise, you can use one that captures your screen, so you preview the camera and record your screen. Hope it helps!
I still trying to make working Factory setting "Switch to front camera for XX seconds after reverse gear" (translated from my language) on my head unit with a simple RCA/CCTV camera.
Now i have hooked (hoping in fast working solution) the camera video out to AV-IN HU connector and after reverse gear for 5 seconds (thats my amount fo time selected on factory settings) i get the classical no video exclamation mark, so my attempt is wrong.
Thinking how solve the situation the other iadea i had is hookin the camera video-out to the reserved DVR 6 pin connector of my HU, but i dont know how it work and what are the pin-outs.
I think, hoping for sure, 2 of them are Cam +12V and GND, 2 are Video (+) and Video (-) and the other 2 i presume are ACC 12V+ and GND or Data (+) and Data (-).
Someone with DVR Cam on HU can confirm and can draw a little schematic with the pin-out and can confirm in if idea of using the factory settings "Switch to front camera for XX seconds after reverse gear" can work right?
Thanks in advance!
You should not connect to video out, that's for an additional screen. You need to have something like camera in
Verstuurd vanaf mijn Z2 Pro met Tapatalk
hans.vinkers said:
You should not connect to video out, that's for an additional screen. You need to have something like camera in
Verstuurd vanaf mijn Z2 Pro met Tapatalk
Click to expand...
Click to collapse
The problem is that Dasaita HU doesnt have a dedicated front camera input, so im trying to circumvent this
See my post in this thread;
https://forum.xda-developers.com/an...development/parking-camera-mod-t3663956/page6
Not the pinout diagram you asked for but a simple circuit you can build for cheap to get what you want by plugging in both your front and rear cameras into your one reverse camera input.
homer.ali said:
See my post in this thread;
https://forum.xda-developers.com/an...development/parking-camera-mod-t3663956/page6
Not the pinout diagram you asked for but a simple circuit you can build for cheap to get what you want by plugging in both your front and rear cameras into your one reverse camera input.
Click to expand...
Click to collapse
Thanks for your suggestion, a good idea! But there is a problem: im totally noob on realizing circuits! i have some skills in soldering and no more.
Do you want to draw a ready to solder circuit for me? are you using standard or smd components? What type of relay you have used?
EDIT:
Today i received a message from Dasaita support pointing me to a video box auto-switcher, i think it work in similar mode of your. What you think about that?
Link:
CAR Cameras Front and Rear camera Image Switch Control Box View Parking Camera System Visable parking intelligent control box
Dasaita: F-cam and F-cam power available somewhere?
Sorry for resurrecting an old thread...
iRcKenny said:
The problem is that Dasaita HU doesnt have a dedicated front camera input, so im trying to circumvent this
Click to expand...
Click to collapse
Hi, I also own a Dasaita unit, and want to integrate a front view camera.
From some posts in this thread that was previously mentioned here (Front parking camera mod), it seems that some MTCD units (KDL?) have indeed pins for the front camera available at the back of the headunit, even if the wire harness don't have the corresponding cables for them.
After migrating to Android Pie some days ago, I activated the system menu to show the front camera and selected CVBS for the DVR, all this with a camera connected to the Aux In yellow input (I know, this will not work, it was just a test). But to my surprise, now I don't see the DVR App anymore (but I see now another app called F-cam). The interesting thing is that through this app, I'm now able to see my (stock) reverse camera whenever I want (even when I'm not in reverse). I thought that this camera was only powered on while in reverse (but apparently is not). As expected, when I switch to the front cam icon in the app, nothing is shown (only the warning icon), since this app expects the front camera to be connected to a specific video input not present in my harness.
Now to my question: Did somebody find out if the Dasaita PX5 Android units have this two pins (F-cam, 12V for F-cam) available in the back connectors (even if not available in the wire harness)?
(Soldering the proposed mods is definitely beyond my capacity - neither the internal nor external one; thanks anyway)
Hi, I'm looking for pinouts of RCA out of Dasaita units.
Can someone send a picture here?
Thanks
Hey guys,
Ive got an Joying JY-UQ135N4G headunit with android 10.
As I have no signal cable for the reverse gear detection, I connected my rear camera to AV IN. When connecting the camera to AV IN there is luckily no need to connect the orange signal cable for reverse gear detection.
Unfortunately the screen does not show any parking lines when using the default "aux" app. (The rear camera app can't be used as the camera is connected to AV IN)
Is there any alternative app that I can use to get the parking lines?
Many thanks & Best regards!
You're doing it wrong.
marchnz said:
You're doing it wrong.
Click to expand...
Click to collapse
? Did you read the whole post?
pwn1ca said:
? Did you read the whole post?
Click to expand...
Click to collapse
try to look in Dev settings of your unit. Default password is four eights usually.
olesolo said:
try to look in Dev settings of your unit. Default password is four eights usually.
Click to expand...
Click to collapse
that not help him becouse with those setings u can add or remowe lines for rear camera input not for av in,solution for him is what he ask about some app who have that line layer in video or he need to do properly wired conection from reverse-light + signal to hernes wire (usualy orange named Back) and change the camera input to hernes where is rear cam video input,if is to complicated for him to conect that wire trough car he can do some hardwire with relay conected to car brake wire and plus 12v trough relay contacts to "BACK" wire on the unit or if he satisfied with tha manual way entering the cam he can use just normal switch from 12v to back wire but in all keyses he need to change video input to rear cam video input
Hi,
I installed Teyes CC3 128GB recently. Auto recording starts, for the front camera, when the ignition switch is on.
Also, how to transfer the video files from unit to android phone?
Any help will be highly appreciated.
Thanks and regards
front camera does not have record option. if you mean teyes x5 dvr this is piece of non-working ****.
to download files you have to take out sd card and put it in some sd reader