Hello.
Earlier today I wanted to try a new JB rom to replace ICS so I transfered it into SD card and tried to reboot into recovery.
Instead of getting to recovery, I got stuck in fastboot mode, so I'm assuming recovery has been damaged.
After a whole afternoon of researching this forum I tried for several times this tutorial in order to install a recovery and afterwards a ROM (http://forum.xda-developers.com/showthread.php?t=1088046) and similar ones in both Mac OS X and Windows 7 (tried both USB 2.0 and USB 3.0 so its not a problem from USB) and I didn't succeed at all.
When I am using Windows 7, when I use "fastboot erase recovery", I keep receiving this message "waiting device". If I write "fastboot devices", I don't get results.
When using Mac OS X, I can get via command line to the folder "platform-tools" where fastboot is located but if I write "fastboot erase recovery" or something, it says "command not found". I've read it could be because I have to set fastboot as an environmental variable, but I having trouble setting it (Mac OS Lion).
Thank you so much for reading. Please help me!!! Any clues would be really appreciated!
-----
UPDATE: I finally managed to communicate with the device.
I used the following commands from this tutorial http://androidforums.com/optimus-m-all-things-root/382525-guide-get-out-fastboot-mode-2.html
fastboot erase boot
fastboot erase recovery
fastboot erase system
fastboot flash recovery
The problem is, now I'm stuck at LG Logo, can't access fastboot... Please help, I think it's even worse now.
boot rom, pull out battery and boot normal, it does or not? if it does use terminal emulator or adb push to install custom recovery, adb will work in fastboot if you had checked android debugging
http://forum.xda-developers.com/showthread.php?t=1007244
http://forum.xda-developers.com/showthread.php?t=1146566
grigtm said:
boot rom, pull out battery and boot normal, it does or not? if it does use terminal emulator or adb push to install custom recovery, adb will work in fastboot if you had checked android debugging
http://forum.xda-developers.com/showthread.php?t=1007244
http://forum.xda-developers.com/showthread.php?t=1146566
Click to expand...
Click to collapse
I don't understand what you mean by boot rom. Every time I turn on the phone, (normal or as POWER+HOME+VOL DOWN) it goes into fastboot. When I pull out the battery, and power again it goes again into fastboot...
techdani said:
I don't understand what you mean by boot rom. Every time I turn on the phone, (normal or as POWER+HOME+VOL DOWN) it goes into fastboot. When I pull out the battery, and power again it goes again into fastboot...
Click to expand...
Click to collapse
ok, read here http://forum.xda-developers.com/showthread.php?t=1088046 do exactly what says in this thread
I have 2 Xoom tablets, in Germany, and I took the SD Card from one of them to put it on a new phone, the Tablet kept working fine until last week that I forgot to plug it and the battery ran out. When I charged it and started it, it didn´t work again, I got the Encryption message, nothing happens when I click the Reset Tablet either, I tried putting the SD card from my other Xoom but still nothing. I enter the Recovery mode and did a Factory Reset and the tablet was OK.
Battery run out again yesterday and got the same problem once again, but now factory reset is not working, tablet stays stuck at the "M" logo after doing it, I have repeat the operation a zillion times and nothing, it stays on the M. Plus I can´t turn it off either.
The model is the MZ604 and Android Version 4.0.4
I connected the xoom to the computer after installing the drives but it won´t recognize it. I got to do the fastboot and flashed motorolas images but nothing. I can´t do the adb reboot bootloader command because ADB won´t work, because I don´t have USB Debbuging checked, but I can´t check it now because I can´t get to settings (
What can I do to recover the tablet?
Anyone, is driving me crazy, no matter how many time I flash new images it always stays on the original, so I can´t flash any special recoveries either
I tried RDS too and after the reboot stays the same in the M logo, nothing changes. What can I do?
No ideas? :crying:
I want to save the tablet if possible.
Hi, could you explain exactly what you've tried?
In particular what you mean by "I got to do the fastboot and flashed motorolas images but nothing." and "no matter how many time I flash new images it always stays on the original, so I can´t flash any special recoveries either"
By flashed Motorola's images do you mean you flashed the stock images?
And when you say you flash new images but it always stays on the original, I assume you mean the recovery stays as Xoom default?
Let me know and I'll see if I can help.
alecbond said:
Hi, could you explain exactly what you've tried?
In particular what you mean by "I got to do the fastboot and flashed motorolas images but nothing." and "no matter how many time I flash new images it always stays on the original, so I can´t flash any special recoveries either"
By flashed Motorola's images do you mean you flashed the stock images?
And when you say you flash new images but it always stays on the original, I assume you mean the recovery stays as Xoom default?
Let me know and I'll see if I can help.
Click to expand...
Click to collapse
Yes I mean stock images, and yes, it always stays on Xoom default, it never changes no matter which Recovery image I flash.
The recovery is likely reverting to default because the Xoom does this automatically each boot.
We might be able to give you a recovery that stays put but the booting issue may or may not be something worse.
Being able to fix the recovery in place is reliant on adb working from recovery itself, which I'm unsure is possible.
Whilst you seem to have reasonable knowledge of flashing and using adb/fastbbot, I'll give full instructions.
I assume you have the necessary files for fastboot so I'll skip that.
Place your chosen recovery image in your fastboot folder. (I recommend ClockworkMod Touch recovery from here)
Hold shift and right click the folder containing your recovery image and fastboot files, then select 'open command prompt here'
Your PC is now setup for the fastboot process.
Connect your Xoom to your PC.
Power on your Xoom and once you see the Motorola logo, wait about 3 seconds, and press volume down.
The screen should show the Motorola logo in the center and '--> Android Recovery' in the top left.
Press volume down twice more until the top left says fastboot then press volume up.
The screen will say 'Starting Fastboot protocol support'
Now on your PC, in command prompt run the following:
fastboot flash recovery xxxx.img
Rename xxxx.img to whatever your recovery .img file is namedOnce verified, reboot by holding Volume up and Power. (Keep connected to PC and keep command prompt open)
Again, when you see the Motorola logo wait about 3 seconds and hit volume down. You should see 'Android Recovery' in the top left corner, now press volume up to enter recovery, you should now see your flashed recovery.
This is where I'm unsure. Try running the following:
adb remount
adb shell mv /system/recovery-from-boot.p /system/recovery-from-boot.p.old
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.oldIf you are able to run this, this will rename the files that are reverting the recovery to default and prevent it happening again. If not, we can go ahead with attempting to flash stock images anyway.
To flash stock images download Build H.6.2-24 for Retail Europe (found here.)
Extract the files to your fastboot folder.
Again, reboot your Xoom, either by holding volume up and power, or from recovery.
And again, after about 3 seconds press volume down 3 times until the top left says '--> Fastboot' then press volume up.
Now run the following from command prompt:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lockThis will wipe all data on the Xoom, and hopefully reset it to stock.
Finally, run:
fastboot rebootand you should boot into Android 3.2(?), fingers crossed.
If you require further clarification or help let me know.
alecbond said:
The recovery is likely reverting to default because the Xoom does this automatically each boot.
We might be able to give you a recovery that stays put but the booting issue may or may not be something worse.
Being able to fix the recovery in place is reliant on adb working from recovery itself, which I'm unsure is possible.
Whilst you seem to have reasonable knowledge of flashing and using adb/fastbbot, I'll give full instructions.
I assume you have the necessary files for fastboot so I'll skip that.
Place your chosen recovery image in your fastboot folder. (I recommend ClockworkMod Touch recovery from here)
Hold shift and right click the folder containing your recovery image and fastboot files, then select 'open command prompt here'
Your PC is now setup for the fastboot process.
Connect your Xoom to your PC.
Power on your Xoom and once you see the Motorola logo, wait about 3 seconds, and press volume down.
The screen should show the Motorola logo in the center and '--> Android Recovery' in the top left.
Press volume down twice more until the top left says fastboot then press volume up.
The screen will say 'Starting Fastboot protocol support'
Now on your PC, in command prompt run the following:
fastboot flash recovery xxxx.img
Rename xxxx.img to whatever your recovery .img file is namedOnce verified, reboot by holding Volume up and Power. (Keep connected to PC and keep command prompt open)
Again, when you see the Motorola logo wait about 3 seconds and hit volume down. You should see 'Android Recovery' in the top left corner, now press volume up to enter recovery, you should now see your flashed recovery.
This is where I'm unsure. Try running the following:
adb remount
adb shell mv /system/recovery-from-boot.p /system/recovery-from-boot.p.old
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.oldIf you are able to run this, this will rename the files that are reverting the recovery to default and prevent it happening again. If not, we can go ahead with attempting to flash stock images anyway.
To flash stock images download Build H.6.2-24 for Retail Europe (found here.)
Extract the files to your fastboot folder.
Again, reboot your Xoom, either by holding volume up and power, or from recovery.
And again, after about 3 seconds press volume down 3 times until the top left says '--> Fastboot' then press volume up.
Now run the following from command prompt:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lockThis will wipe all data on the Xoom, and hopefully reset it to stock.
Finally, run:
fastboot rebootand you should boot into Android 3.2(?), fingers crossed.
If you require further clarification or help let me know.
Click to expand...
Click to collapse
Thanks for the info, sadly I have done almost all that, I can´t use adb commands because I never allowed the tablet to do USB Debbuging, since I wasn´t doing anything that needed that and never thought I would need it. I think I didn´t kept the tablet connected to the PC, so I will try again and let you know if it works.
Like I said before, I'm unsure whether it'll work as I'm not an expert.
However, you may find this helps:
Whilst in recovery and connected to your PC, open Device Manager, find your Xoom, usually under 'Other devices'.
Then right click on your Xoom > Update driver software... > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Pick your Xoom (either one if there's two shown)
Windows should confirm the driver installed then adb should work in recovery.
I believe ClockworkMod Recovery enables USB debugging anyway, through modifying default.prop
I'd recommend trying the above, and/or if that fails for any reason download Motorola USB Drivers here.
Thanks again but nothing works, I tried rebooting being connected to the PC and the same thing happens, the default recovery from the Xoom stays there, fastboot shows on the command Prompt and in the tablet that everything went ok and the new image was flashed but the rebooting kills it, and I can´t use any ADB commands because of the stupid USB Debugging, if something like this can happen, Motorola should have left it open from default or at least have a fail safe in case something like this could happen. RDS also flashes an image but when it rebbots the whole thing goes to hell, it stays on the damn logo with the same images. I think I can throw the tablet to the trash :crying:
Unless its a serious hardware issue, I wouldn't trash it! It clearly has life as you're able to successfully flash and such.
I'd recommend having a look at the FAQ.
alecbond said:
Unless its a serious hardware issue, I wouldn't trash it! It clearly has life as you're able to successfully flash and such.
I'd recommend having a look at the FAQ.
Click to expand...
Click to collapse
Thanks, but I have done everything, what is the good thing of a successful flash when the tablet returns to it´s previous state as soon as it reboots?
Plus I can´t use one of the most important things, adb, because of the usb debugging, I can´t get into the tablet to activated it, and even if there are recoveries which bypass this thing, I can´t flash them into the tablet, well I can, they just aren´t there after the reboot. And all this because the tablet run out of battery :crying:
ClockworkMod recovery itself allows the use of adb regardless of USB debugging setting.
I believe the command adb remount should allow it.
If adb is denied you can try what I said earlier
Whilst in recovery and connected to your PC, open Device Manager, find your Xoom, usually under 'Other devices'.
Then right click on your Xoom > Update driver software... > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Pick your Xoom (either one if there's two shown)
Windows should confirm the driver installed then adb should work in recovery.
Click to expand...
Click to collapse
alecbond said:
ClockworkMod recovery itself allows the use of adb regardless of USB debugging setting.
I believe the command adb remount should allow it.
If adb is denied you can try what I said earlier
Click to expand...
Click to collapse
The problem lies with the recovery, I only have the default recovery from the xoom, it doesn´t matter how many times I flash it and everything seems to work correctly, when I restart the tablet I get the default recovery. I don´t understand why this happens, command prompt and the tablet in fastboot mode tell me the recovery has been flashed, but to use it I have to reboot and when I do I always find the same good for nothing recovery.
recovery
Hello,
I don't really understand your problem with the recovery ?
When you flash a custom recovery with fast boot, you restart the tab and after 2 or 3 second you see the Motorola Logo you push the volume down
and volume up button to enter in the new recovery.
If you flash custom recovery but restart completely the TAB without manually enter in the custom recovery, each time you retrieve the original recovery.
pots22 said:
Hello,
I don't really understand your problem with the recovery ?
When you flash a custom recovery with fast boot, you restart the tab and after 2 or 3 second you see the Motorola Logo you push the volume down
and volume up button to enter in the new recovery.
If you flash custom recovery but restart completely the TAB without manually enter in the custom recovery, each time you retrieve the original recovery.
Click to expand...
Click to collapse
Here is what happens, I flash new recovery, I restart the xoom with power and volume up, when the logo appears, after 3 seconds, I push volume down, recovery option shows, I press volume up and the default recovery is still there, not the new one I just flashed.
Is really no one out there that can help? :crying:
There's nowhere stated that, however I believe you already have unlocked your bootloader, didn't you? Because it's REALLY weird that it can't flash the recovery, I mean, you left the battery run out, then after charging you wasn't able to boot normally again.
I'll think a little, but give a check if your bootloader is really unlocked, the device should have installed the recovery, and as you didn't restart it entirely (let it go after the dual core logo), the recovery should be there...
"We think so supersonic and we make our bombs atomic" - Eagle Fly Free (Helloween)
Sent from my Nexus 10 using Tapatalk HD
I have done the fastboot oem unlock command, should I do it everytime? I can´t use adb, because like I said, I never check the USB Debugging, which I have done in my other tablet now, don´t want the same thing to happen twice.
is it dead?
hgokuh said:
is it dead?
Click to expand...
Click to collapse
I unfortunately believe that yes, however I'm still thinking about it! So don't give up! As soon as I have another answer I shall post something
"We think so supersonic and we make our bombs atomic" - Eagle Fly Free (Helloween)
Sent from my Nexus 10 using Tapatalk HD
First I'll give credit where it is due. From two threads on this site is where I got help with this issue:
I followed THIS guys steps for manually erasing and got the recovery images and lots of other useful information from HERE. Thank you guys very much!
OK, so, hopefully I can help someone with my little story as well. I was having issues with apps and programs crashing on me with lollipop and the new marshmallow update. The tablet just wasn't working properly and moving slow. I even had the SD card holding all my apps and larger files so I didn't overload the internal storage. So, I decided I wanted to flash back to factory/stock recovery and go from there. I did this using THIS method. I flashed via the "flash-all.bat" file (the command in fastboot is the same as the file name). I should note that there was one instance that failed during the install (I did try it again and got the same failure). Said something about “did you mean you wanted to flash this partition” or something, then showed it failed. After flashing I hit continue on the bootloader screen of the tablet and it said it was "cold booting." After about 5 minutes or so it started to boot but never made it past the NVidia screen. I tried wiping the phone with factory reset, wiping the cache, etc. and then re-flashing the recovery (again with the .bat file). I tried flashing TWRP but it didn't install apparently, because it still went to factory recovery. I even re-locked and then unlocked my bootloader to see if that would set everything straight. Nothing seemed to work. I knew I would eventually find a solution though so I kept looking. Stumbled on some other people that had the same issues but no solution (hope those people got it figured out). So here's what I did after some more research:
First, if you're in this situation and you did factory reset to try and resolve the problem, you may feel like you can no longer communicate with the device via fastboot/adb, but as long as you have the usb drive and your SDK tools installed (I used CodeWorks for Android all-in-one program) that shouldn't be a problem. You'll just have to be in the bootloader on the tablet.
-If for some reason you deleted or uninstalled your drivers and tools you'll have to download them again and then, the computer should still be able to communicate with the tablet. In the device manager under portable devices it will still show up as Module something or other. So the computer still sees the device but doesn't fully recognize it yet. Don't worry, this should still work! Just make sure you that fastboot is seeing the device by inputting "fastboot devices" in the command window and a 14 digit serial number should pop up. If it just says "list of devices" or there's nothing then you wont be communicating with the tablet.
Your device should be connected to your computer and started in bootloader mode. On your computer you should have the command prompt for adb/fastboot open. I just go to the folder where the .exe files are located and hold shift and right click in the white space of the folder, then select "open command window here."
From here follow the erase steps: stolen from manigault! :highfive:
fastboot erase system
fastboot erase userdata
fastboot erase boot
fastboot erase recovery
fastboot erase cache
Then flash your recovery MANUALLY:
fastboot flash recovery {dir}/recovery.img
fastboot flash boot {dir}/boot.img
fastboot flash system {dir}/system.img
fastboot flash userdata {dir}/userdata.img
fastboot flash staging {dir}/blob
fastboot flash dtb {dir}/tegra124-tn8-p1761-1270-a04-e-battery.dtb
You can download whatever recovery version you wish. I downloaded 2.2.2 because that's what my device came with out of the box on Christmas 2014. It will more then likely be a .zip file. To make this whole process a little easier simply extract the files in the .zip file where the adb.exe and fastboot.exe files are located (folder should be named platform-tools) and you can completely eliminate typing the whole directory before the file name. ***After your done flashing everything you can go back and delete those files if you want. Just double check that you're deleting the right files by looking at the original zip file. Not sure if it makes a difference but I deleted them anyway.
For example the commands in fastboot will look like this exactly :
(after extracting recovery files into platform-tools folder)
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
fastboot flash dtb tegra124-tn8-p1761-1270-a04-e-battery.dtb
Note: Do NOT use the flash-all.bat command as this doesn't seem to work for this situation. Do it manually like shown above. And let each individual process complete before attempting to input another command.
After this step I didn't select continue on the bootloader. You can either select reboot or simply input "fastboot reboot" into the command window. It may take about 5 minutes to start installing everything but just be patient, it should start. Sometimes with these things you have to do things twice before it works. If for some reason it doesn't work the first time then start from the beginning and try it again. It took two times for me, but that's because I installed system.img twice and was getting double screen. Newb error... and I was a bit inebriated last night when I did this.
Hope this helps someone!
Thanks again to manigault and MidgetMob!
NVIDIA download files HERE!
i think i done the same thing
but the problem i now have is i cnt get tablet into fastboot on pc. i can load fastboot on tablet with power and volume down , but the tablet only shows as MTP device in device manager. i have downloaded drivers from nvidia and no matter what i try i cant install them i have been through all instructions but scince it went to mtp device i cant get device showing in adb. The only way i can get device showing in adb on pc ist to select apply update from adb ! but none of these commands listed in your post will work because its in sideload. is there anyway i cn reset , flash custom rom ect bu using commands while device is in adb sideload.
all i get is now send the package you want to apply to the device with "adb sideload <filename>".....
if you could shed any light on this it would be much appreciated , thanks , lester
did you update official android 6.0 before? then, not working stock recovery, stock boot...
If you can enter bootloader mode, download unofficial twrp 3.0.0.0 (here http://forum.xda-developers.com/shield-tablet/development/wip-twrp-2-8-0-1-unofficial-t2877117) and flash it.
i have a working boot.img file on marshmallow if you want.. please reply.
Sorry for the late response! I have no clue how you got into sideload??? Are you talking about through the recovery on your device? You're not able to get adb/ fastboot to recognize the device, right? It doesn't matter how you get the tablet into the bootloader. Whenever you have the phone in the bootloader then you'll use the fastboot command to "talk to" the device; i.e. "fastboot devices" without the quotes. That command should show your device if it shows as an MTP device whenever you open your "device manager" in windows. That's the same exact situation I was in. Download the codeworks from nvidia like I linked above. Hopefully then you should be able to recognize your device through the bootloader. If not DM me and I'll try to help you.
I'm having the exact problem as Lester. Tablet boots into bootloader but won't connect to computer. So I go into recovery mode and nothing works except apply update from adb. Which brings up the side load message that Lester quoted. And bootloader is showing "device=locked". I am attempting to fix this tablet for a friend that messed it up trying to flash a custom rom. Problem is he had no idea what he was doing and I'm not exactly sure what he did. I do however have a lot of experience with rooted android devices and flashing so any help would be GREATLY APPRECIATED!
---------- Post added at 05:59 PM ---------- Previous post was at 05:55 PM ----------
Also, I've already tried flashing stock rom back onto the tablet by applying update from sd card function in the recovery but when I try to do that the tablet for some reason can't mount the sd card.
rom fiend said:
Tablet boots into bootloader but won't connect to computer.
Click to expand...
Click to collapse
If you've got the device in bootloader then you need to use fastboot, not adb. Try the command 'fastboot devices' and see if the device id is listed. If so then grab a factory image, unzip it and use fastboot to flash the .img files using the commands 'fastboot flash system system.img'. Just make sure to match the partition names to the files.
Hello i have similar issue except when i try flash something i get this error ''remote: file write failed''
and i have to reboot into fastboot to get it flashing fully
but even though i managed to flash everything by rebooting when i boot system nothing shows up, i can just see the back light coming on and turning off after a while
Please help
Code:
TRY THIS AT YOUR OWN RISK! This could brick your phone. It shouldn't but it can. If you brick your phone, or anything stops working on your phone, YOU are responsible.
Reboot combinations:
Fastboot: Shutdown and with USB cable hold power and volume down until it says FASTBOOT MODE at the bottom
Recovery: Shutdown and with USB cable hold power and volume down until the
Code:
Please release key to power off *
dissapears.
Unlocking Bootloader
Code:
Note: This will delete all user data! Backup all your data before doing this!
This part of the guide is part of the tutorial made by @Arin59 at https://forum.xda-developers.com/nokia-3/how-to/method-to-unlock-bootloader-nokia-3-pie-t4012285
First of all convert your serial number (should look like NE1*************) to MD5 Hash and enable OEM Unlock in developer options.
Then reboot to fastboot and type
Code:
fastboot oem key {HASH}
then type
Code:
fastboot flashing unlock
.
To reboot to Android, run fastboot reboot.
Installing TWRP
Code:
This will delete your user data, but it should be already deleted.
You can use any TWRP image made for this device but I had the most success with https://forum.xda-developers.com/nokia-3/development/twrp-teamwin-recovery-nokia-3-t3762512 .
Flash your TWRP Image chosen with
Code:
fastboot flash recovery your-recovery-image.img
and then reboot to recovery.
In TWRP go to Wipe and then Format Data and type yes.
Install Magisk
Install Magisk normally.
< waiting for device >
I put the phone in fastboot mode and ran fastboot with the oem key md5 hash command but it just said "< waiting for device >". I think it might be because I forgot to install the Nokia 3 USB drivers. I'm using a linux computer, do I need to find OS specific drivers?
edit: And now my phone is stuck in fastboot mode and for some reason will not shutdown no matter how long I hold down the power button for.
Totalitor said:
I put the phone in fastboot mode and ran fastboot with the oem key md5 hash command but it just said "< waiting for device >". I think it might be because I forgot to install the Nokia 3 USB drivers. I'm using a linux computer, do I need to find OS specific drivers?
edit: And now my phone is stuck in fastboot mode and for some reason will not shutdown no matter how long I hold down the power button for.
Click to expand...
Click to collapse
If you're using a linux computer, you should try running the command with sudo.
If it doesn't work, try with another cable (or computer if it doesn't work) and try again.
#AC said:
If you're using a linux computer, you should try running the command with sudo.
If it doesn't work, try with another cable (or computer if it doesn't work) and try again.
Click to expand...
Click to collapse
Thanks. I've since got it working. For some reason I had to use the -i argument (the interface argument) along with the code for the device (0x2e04) "fastboot -i 0x2e04 <command>".
However, I've recently bypassed the "NO COMMAND" screen and gained access to TWRP custom recovery but in trying to shut down the phone, it shuts down fine but only boots up in fastboot mode. Even using the fastboot reboot command from adb tools boots it up in fastboot mode. This is a problem as I need to boot it in its normal mode so I can download the magisk.zip file required for installing magisk but I seem to be unable to do so.
Totalitor said:
Thanks. I've since got it working. For some reason I had to use the -i argument (the interface argument) along with the code for the device (0x2e04) "fastboot -i 0x2e04 <command>".
However, I've recently bypassed the "NO COMMAND" screen and gained access to TWRP custom recovery but in trying to shut down the phone, it shuts down fine but only boots up in fastboot mode. Even using the fastboot reboot command from adb tools boots it up in fastboot mode. This is a problem as I need to boot it in its normal mode so I can download the magisk.zip file required for installing magisk but I seem to be unable to do so.
Click to expand...
Click to collapse
Try holding volume up and down at the same time while holding the power button.
#AC said:
Try holding volume up and down at the same time while holding the power button.
Click to expand...
Click to collapse
Thanks, it worked.
Though I tried wiping, but it didn't solve the booting issue. Unsure how to proceed at this point. I feel like I've tried everything. Actually, I just checked my /boot folder and it's empty...is that why it's always booting into fastboot?
I tried using adb to sideload the magisk.zip file but then the phone rebooted into stock recovery??
Any and all guides on this say to download the magisk.apk either into the SD card or internal storage, but I don't have a micro SD card and I can't access the normal mode of the phone to download anything.
What can I do?
I've flashed TWRP successfully but forgot to download the magisk.apk. Now whenever I boot up my phone, it boots into stock recovery mode automatically, even if I tell TWRP to reboot into system it reboots into Stock Android recovery. I can still access TWRP by holding down the up + power buttons on boot though, but I can't access the normal mode of the phone anymore.
I tried using TWRP's sideload feature with ADB tools to sideload Magisk.zip and it said it succeeded but in using TWRP's install feature to find the zip file, it wasn't in /sideload/ or /storage/ as both were empty.
How can I temporarily restore normal functionality so I can simply download the Magisk manager.apk?