Sturdy, tough, and rugged. Very easy to assemble and disassemble. Keeps out dust quite well, too. The plastic cover works well with a tempered glass screen protector, which doesn't affect touchscreen functionality at all. Though there are light, barely noticeable "whorls" on it, seen at certain angles. Some people might prefer to just remove it entirely, but again, it's not very noticeable so I left it on as it keeps the tablet and screen clean. The rotating grip stand is a really nice feature, which allows you to position it at any angle, any side. I really like this case, I've had it for a few months and it's kept my tablet pristine and safe.
I got it on eBay, at the link HERE. Cheaper than Amazon.
Related
I purchased the Body Glove hard case (matrix) and am quite pleased with it. While it isn't perfect, I can't see there being much better for this phone.
Aesthetics.
I think it looks pretty slick. The back is pretty flashy and it looks pretty good on the phone. It doesn't cover much of the face itself, which I think is good since I have a screen protector and it doesn't inhibit the track pad.
Protection.
I haven't dropped it yet, but it does sport a protective felt-like pad on the back side so it won't scar the metal back. The front does provide enough protection that if it landed on its face, I think it will provide enough gap between the concrete and the screen - about as much gap as my iPhone's case which has survived me 2 years and many drops on the face. It's a functional, protective case, we can leave it at that.
Use.
It snapped onto the phone surprisingly well and doesn't inhibit any functionality. It slides out of the pocket very easily (just as well as a naked phone, probably better than a gel case) and only adds a little extra bulk...overall it is only slightly larger than my iPhone 3g, but that is just the added keyboard. The weight added is negligible.
Issue.
My one complaint is that the case is not as rigid as hard cases I am used to. The part around the screen is flexible, and as you can see in some photos I attached, it really does bow out when given the right amount of pressure.
Overall.
Awesome case: looks nice, provides enough protection (IMO), and doesn't interfere with other photo functions.
Also, I have added the T-Mobile anti-smear/anti-glare screen protector, which works great:
The feel is good - right now it might be a little to clean and my fingers don't swipe to great - i'll follow up on this as I use the phone more.
It covers MOST of the screen..you can see in my first photo that there is only a little piece of screen (the bottom of the buttons) that is uncovered.
It hides finger prints and smudges like a champion and doesn't take away from the screen clarity IMO - but I've always used a anti-glare screen protector, and i don't notice any sort of grainy-ness.
Doesn't take away from the responsiveness of the buttons on the bottom.
My phone is yet to be activated (company line), but overall just playing around on WiFi for a few hours, I am very satisfied and would recommend this combination.
I purchased the body glove case, and I do not like it at all.
It seems a lot thinner and cheap compared to other bodyglove cases.
At 29.99 in the T-mobile store it is a rip-off. I am going to buy the oem one...it seems sturdier at half the price.
Just saw this body glove case with kickstand for $11
http://www.amazon.com/Body-Gloves-Glove-Snap-T-Mobile/dp/B0042AH37M/ref=pd_sim_cps_3
Anybody tried this before? Good deal?
Hi guys;
Today I finally got my case for SGS!
And in start, I have to say that is great, even I had some issues with installation of this case.
I have ordered my case from ExportPrive online shop: SGP Ultra slider hard case for SGS, and because I didn't wan't to pay more for delivery it took almost 3 weeks to get my case.
With case I got one SGP STEINHEIL Crystal Clear screen protector and 4 small protectors for camera lens:
And just to mention, I mess up aplication of screen protector so I got two boubles .
But later I removed that screen protector, because it was sooooo fingerprints sensitive, that after 5 min of use, protector got so messy that it has become totally reflective and has affected viewing experience of phones screen. But it didn't effect sliding of fingers over screen; sliding was nice and smooth.
Installation of case was a bit tricky; at first I have applied additional protective stickers, but as I have realized, they affected positioning of phone inside case, so I wasn't able to close case properly. So I have to remove all those stickers and cut part of internal padding to make phone fit more nicely inside case:
After that I notice that bottom part of case didn't "click" on top part, or to be more exact, it did, but not enough to make a solid connection. So I use lighter to melt part of bottom case and made additional ridge, to make it connect better with top part:
But be VERY careful while doing this; this plastic is very sensitive to heat, so it melts very fast!
After that, case fit nicely, close nicely and remain solid and rigid.
Video:
youtube;wmYSbqu3W0A]http://www.youtube.com/watch?v=wmYSbqu3W0A
Over all, i'm happy with this case, and all this small issues ware something that I expected, so it didn't affect my overall impression of case.
But I'm disappointed with screen protector; those bubbles ware not a issue (i remove them with no problem later), but issue with fingerprints made this screen protector useless, because it affected screen visibility and look of phone, because it made fingerprints more pronounced.
So, for case, I'll give rating of 4/5, and for screen protector 2/5.
Yeah I also got this case from the same site, I must say I'm very pleased with this case and it seems that its very good for protecting it,
Thanks for the good review
Nice work, what ROM and clock is that ?
So this case is hard plastic no rubber to it?
If it is hard plastic when you drop it on impact wouldn't the case just break and absorb none of the impact unlike a rubber case
TieNN89 said:
So this case is hard plastic no rubber to it?
If it is hard plastic when you drop it on impact wouldn't the case just break and absorb none of the impact unlike a rubber case
Click to expand...
Click to collapse
If it breaks then it absorbed all of the impact.
@OP
I didnt have to burn anything on mine or cut the padding that was installed, its a pretty good casing but theres.
The only bad thing about the white casing is that when there are scratches at the back with in the camera hole ( horizontally from edge to edge ) its gonna show up like a black line, this is true for all colors except the black.
I bought myself the Exspect Desire HD case, installed the screen protector and took some pictures. Here is a little "review" of the case.
First of all, the screen protector. I have to say, this is one of the best screen protectors I have tested, and I have had a few for different devices. Like most screen protectors, it is very clear, you do not even notice that it is there. It is easy to apply, and if something goes wrong (like I had some dust under it), you can just peel it off and try again. The best thing about it is that it is not sticky. For example ZAGG screen protectors feel sticky, and you cannot slide your finger that easily on them. This screen protector actually makes the screen more slippery!
Then to the case. The first thing I noticed is that it has quite bad design for the camera. Normally in DHD the camera protrudes quite a bit, but this one makes it even worse. The silicone has a cheapo -looking texture, and the protruding bit is very flimsy. I actually cut it down with scissors, and finished the cutting with some sand paper.
The case itself is not bad, it fits around the DHD very well. It does not make the device bulkier, so it is ideal for users who want to keep their phone slim. The rubbery silicone gathers quite much dust, and it is not very easy to clean. It is sticky, which makes the phone harder to pull out of a pocket. I think that this applies to most cases, so it is not really Exspect specific problem. The quality of the silicone is very good.
All in all I like the case, and I will start using it daily instead of my PO 520 leather case (at least for a while). I also bought the Otterbox case, and if this review gets feedback, I will probably post another review about it when I get it.
Cheers for this.
I'm certainly interested in the Otterbox review if you do it.
That Exspect does have a lot of dust yeah. That would put me off I think, but I'd like to see one anyway.
jkoljo said:
Then to the case. The first thing I noticed is that it has quite bad design for the camera. Normally in DHD the camera protrudes quite a bit, but this one makes it even worse. The silicone has a cheapo -looking texture, and the protruding bit is very flimsy. I actually cut it down with scissors, and finished the cutting with some sand paper.
Click to expand...
Click to collapse
i agree with everything apart from this section:
- i like how it extends further than the lens, when i put it on a desk, i protects the lens
- the silicone is actually very high quality and i think it is very good, obviously you;ve never gotten a cheap unbranded silicone case from ebay
Yeah, and I have to say, my standards tend to be quite high
The silicone itself is very nice, but the block texture puts me off.
Would be interesting to see how well the screen protector performs. I managed to get a couple of different makes for a couple of iPhone users - noticed they showed finger prints quite badly
The screen protector does show finger prints, but I would take the additional slipperyness over naked screen any day.
jkoljo said:
The screen protector does show finger prints, but I would take the additional slipperyness over naked screen any day.
Click to expand...
Click to collapse
I have the expect housing. It does collect dust nothing to worry about really. The case for the price is excellent.
Personally I don't like using screen protectors. I think they show up all sorts of scratches and marks. I've not used one since release day and there's not a mark in my screen. I had my Hero for 15 months with no screen protector and not a mark on it when I sold it.
Sent from my Lee DrOid Loaded Desire HD
Thanks for the review. I have one on order, it should be here this week. I am currently using case mate silicon case which looks exactly the same as the exspect without the textured design. I ordered yhe exspect because it looks like its going to protect the camera because of the protruding surround which you didnt like. Well see how I get on when it arrives. Im also interested with otterbox but it looks bulky.
Hi, I also own one of these cases and i'm very happy with it. The screen protector is excellent, it picks up prints same as any other SP, but it's the best one i've had in terms of screen response and usability.
All in all, it's one of the better phone cases i've ever used and the screen protector that comes with it is excellent. Would recommend.
I got mine today and I am very disappointed with this case. It seems like the manufacturers focused on presentation and packaging but the actual product is crap. First its a bit loose, second the front of the case, the bit that goes around the screen does not grip properly because it barely goes around the screen not like the casemate silicon case. The only thing I like is the camera surround protetcs the camera well. I cant comment on the screen protector as I havent used it yet. Don't buy this product.
Edit:
Also forgot to say the buttons are not aligned properly and are difficult to press.
Edit 2:
I find this case easy to slip in and out of my pocket compared to the casemate safe skin:
http://www.carphonewarehouse.com/ph...essories/buy/CASEMATE-DESIRE-HD-SAFE-SKIN-BLA
Mine fits well, but it is not exactly tight. The buttons in my case are properly aligned, and it is easy to operate the phone. I think that the case comes off the phone a bit too easily, though.
I've tried the following:
Belkin Verve Folio Stand.
http://www.belkin.com/IWCatProductPage.process?Product_Id=593390
Nice, quality leather case. Thick when folded 180 degrees. This could be a pro or con. It gives a nice thick grip when reading in portrait mode. Some will like that, some won't. Speakers are not muted when used as a stand. Edges stick out which probably add protection in the event of a fall, but also make the power and volume buttons difficult to operate. Not hugely so, but annoyingly so.
Belkin Slim Folio Stand.
http://www.belkin.com/IWCatProductPage.process?Product_Id=593409
Artificial material. High quality. Very thin. Very much like the Apple case my wife has on her Ipad. Speakers are not muted when used as a stand. If you want a very thin book style case, this is almost perfect. One Con: When opened 180 degrees, as in reading a book in one hand, the cover flops down in the middle. Its because the front cover folds up into a small triangular support. Stupid, because it works great as a stand using the same style as the Verve above. Having two types of stand styles, both landscape, is useless. If you like to hold the tab with the cover rotated 180 degrees you may find this annoying.
Plastic Skin
http://www.ebay.com/itm/Case-for-Ga...Accessories&hash=item45ffdeff77#ht_2358wt_814
Fits perfectly. It covers the sim card port, but so what? I leave this on 24/7. Needless to say, I really like it.
Case
http://www.ebay.com/itm/RIM-BlackBe...ultDomain_0&hash=item43a6ba953b#ht_5150wt_952
It fits perfect. The Model is the A7s. Ignore the models specifically labeled "8.9", they're too big. The A7s fits perfect with no stretching. It's a kind of pleather. However, it has a memory foam layer that makes it very cushy. It zips all the way open on three sides. When the plastic cover listed above is on, it still fits great in the memory foam case.
Vikuti Screen Protector
http://www.protectionfilms24.com/ar...-adqc27-samsung-galaxy-tab-8,9-lte-59075.html
Pros: Impossible to tell it's on. Just as slick to the touch as the glass, crystal clear. Fit's perfect. Cons: A bit harder to clean fingerprint smudges off than the straight glass. It doesn't seem to improve or degrade how smudges show, just a bit harder to clean.
eBay USB Adapter
http://www.ebay.com/itm/28076991331...X:IT&_trksid=p3984.m1439.l2649#ht_4940wt_1048
Works great, cheap.
ebay Screen protector
http://www.ebay.com/itm/26089903615...NX:IT&_trksid=p3984.m1439.l2649#ht_3340wt_989
Outside edges fit perfectly. Camera hole in wrong place. Reduces reflections, but there is a "grainy" look to it. The graininess is annoying enough that I did not leave it on.
I hope this helps out anybody looking at accessories...
with all the issues reported on tempered glass protectors (I'd originally bought one myself) I ended up going with the Spigen tpu screen cover and the clear case with feels solid and they work together fine.
While browsing about I came across this:
http://www.ebay.co.uk/itm/161986959...49&var=461159948372&ssPageName=STRK:MEBIDX:IT
Its like a reverse case, essentially wrapping the phone completely and yes, the touch and sPen work fine through it. OK it doesn't feel like glass and you do get some polarisation when viewed at an extreme angle, but I kinda figure its better to have the whole glass covered than not and you don't use your phone at >60 degree angles generally, well I don't anyway. I left the spigen screen protector on under it, at least any dust getting under the skin won't get to scratch the glass itself and hasn't caused any issues. Unlike the Spigen case that leaves a lip at top/bottom of the phone body this is uniform which helps it slide in/out smoothly of the Brodit universal mount in the car to which I added a Qi plate.
May well order up one of these to see if it has a better feel to it, but that'll have to wait until the house move is done
https://www.google.co.uk/url?sa=t&r...9NA0q32Vq0bQj4ytimoM0w&bvm=bv.135258522,d.bGs
Somehow I doubt the drop protection on these is up to the "proper" cases but I'm more concerned about the edge glass suffering as that seems to be the real achilles heel on this "brilliant" design. Pity they never offered a flat non-edge version as I'd have much preferred that but other than that I'm more than happy with the phone overall...
hope this helps, at least another case option to consider
ok to update after a few days use...
So far happy with it, I did "shrink" the case a little in hot water to get it to be a more cozy fit.
Now its a bright day here, you do have a screen covered in dots with direct sun/very bright lighting but still fine if shaded. Also noted polarized glasses show rainbow patterns from the edges in the same way as viewed from acute angles.
For me, it'll do for now till something else comes along. At that price its OK for my needs