Related
I got my screen protector in the mail today and put it on my phone. I figured I should share my thoughts along with some pictures for those who are looking at screen protectors.
The pack came with two screen protectors, a squeegee, some dust removal stickers, and a small micro fiber cloth. The protector was not too bad to put on, pretty similar to other dry application ones and the Realook which I have used on my Samsung Vibrant. It was kind of tough to align because the screen protector is literally exactly the width of your screen, so if you're off alignment, it looks horrible.
The screen protector is definitely super clear. It also is a fingerprint magnet, and it feels slightly tacky. I'm hoping that tackiness will go away as it gets more use, because I like being able to glide over my screen smoothly.
One huge disadvantage with this screen protector is that because of the curved screen, the protector only covers the flat part. It is definitely noticeable when you see it closer. I tried taking pictures to depict this. I also with they would have just had the protector cover the FFC. I'm not sure how it would actually affect the optics (if at all), but I really hate that cut out! Overall, I'm decently content with my purchase, but I would love to see pics and reviews for BSE when those arrive since I'm considering that for the back, and even replace the front if I end up not liking the Spigen.
Thanks so much for these. I used the SGP on my Gnex and loved it. There's something special about these Crystal series ones but I don't remember what it is.
Sent from my Nexus 4 using Tapatalk 2
I got the Ultra Clear for my N4. It hasn't arrived yet, so for now I'm using my spare One X Oleophobic. The Oleophobic is great, really good for repelling fingerprints, I would have got it but when I bought my N4 UltraClear they weren't selling the Oleo. Thanks for the pictures, it seems to fit a lot better than the One X SGP protectors did on the One X. Doesn't look too bad at all.
I got the crystal clear and I have the same issue with the protector being too small. I know that this has been the case with some their other protectors, but I'm going to have to try some other brands. I can't stand it being cut off like this.
Sent from my Nexus 4 using xda app-developers app
Where did you get it from ?
juventuss said:
Where did you get it from ?
Click to expand...
Click to collapse
The Spigen website.
I wonder if using the Google Bumper will hide the fact that it doesn't quite reach the edges.
I got the oleophobic one in today from SGP, it doesnt cover the whole screen either. Better than nothing i guess for now.
I'm starting to have a huge distaste for the curved screens. Feels nice with the hardware buttons on my S3, but looks like utter garbage with a screen protector.
jackierobinson said:
The Spigen website.
I wonder if using the Google Bumper will hide the fact that it doesn't quite reach the edges.
Click to expand...
Click to collapse
The bumper does not cover it.
Also big warning for people looking to buy SGP: The light sensor is covered by this screen protector (not cut out like most) and it interfered with the functionality of the phone. In the past I've had screen protectors that went over the sensor without issue, but with this particular protector and phone, it did not work.
For example if i went to make a phone call, the screen would stay dark even if i took the screen away from my face. Also auto brightness didn't work either. I had to cut the film to expose the sensors. Everything is working normally now. Anyone else have this issue?
Also received mine today, dont have the phone yet though. Not feeling too happy about it already seeing as it doesnt cover the curved screen too well... Money down the drain then :s
Mine will arrive today and I plan to put it in a case so its not a big deal. The SGP on my Note 2 didn't go all the way to the edge either. A tpu case fixed that and everything was covered.
Sent from my Nexus 4 using Tapatalk 2
Good thing I waited. I am planning on using this phone with screen protectors only and I can't pay for a high quality one that looks pretty bad IMO.
Looks great. SGP never usually covers the entire front. It is always just a tad bit smaller.
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
ceejay83 said:
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
Click to expand...
Click to collapse
Yes, I'm just hoping someone finds out a way to make t stick over the curved glass. I guess I am going to have to go with a wet screen protector.
ceejay83 said:
You guys do know it has to be cut smaller because the curved edges will make the protector peel right?
Click to expand...
Click to collapse
Yes, but it stops way short of the curve. It literally just covers the display (width wise). They could have extended it a bit further. This is going to leave a gap, even with a TPU case on it.
How is the smoothness of these screen protectors? I really like the way zagg HD screen protectors feel and I'm looking for something similar.
Just received mine today. Installation was straightforward and the dust removal stickers easily snatched up the remaining few bits of dust at the end. The surface slickness is shockingly poor at first but improves drastically after just a few minutes.
The film doesn't run all the way to the edge due to the curvature of the screen, but there may be a solution. Steinheil makes a dry application edge to edge film called Curved Crystal for the SGS3 which also has a curved edge screen. If there is enough interest, I'm sure they will make one for the N4.
NYConex said:
How is the smoothness of these screen protectors? I really like the way zagg HD screen protectors feel and I'm looking for something similar.
Click to expand...
Click to collapse
I'm not sure how smooth the zagg HDs are, but right after you put the screen protector on, it is really tacky. But it gets much more smoother as you use it. I think that as you use it more, you're depositing more skin oils onto to screen protector and it kind of "seasons" the screen protector.
This sounds weird, but I just put a bunch of fingerprints on it, then I distributed it using a dry kimwipe (i'm sure a microfiber would work too) and after using it for about 24 hours, it's pretty much as slick as you would expect from the bare glass. Also, of course there is no orange peel feeling since this is a dry application screen protector.
ewuzh said:
Just received mine today. Installation was straightforward and the dust removal stickers easily snatched up the remaining few bits of dust at the end. The surface slickness is shockingly poor at first but improves drastically after just a few minutes.
The film doesn't run all the way to the edge due to the curvature of the screen, but there may be a solution. Steinheil makes a dry application edge to edge film called Curved Crystal for the SGS3 which also has a curved edge screen. If there is enough interest, I'm sure they will make one for the N4.
Click to expand...
Click to collapse
they already emailed me back saying they don't have plans to make any.
After having seen all of the issues with the glass screen protectors for this phone, I decided that I needed to try something else in the meantime. While I have a Sakai glass one that I ordered from ebay that is due roughly a month from now, I'm not very hopeful for it working. As a result of all of this and the need for a screen protector ASAP, I went with the Spigen screen protectors that I have seen mentioned on here. Having used PET films in the past, I was expecting a huge hassle. Bubbles, cheap feeling etc. Turns out, these worked REALLY damn well, to my complete surprise.
Installation:
Installation was quite easy, much easier than the older thin film screen protectors that I remember. You simply clean the surface of the phone, following the instructions. Place the tabs on the screen protector to help you position it. Then carefully position it properly keeping an eye on the edges and the sensors. It adheres to the screen very much like a glass screen protector does. There are a few small bubbles here and there, but they squeegee right out. I ended up with two permanent bubbles (one by the light sensor and one near the edge). Neither were the fault of the screen protector, both were caused by me rushing and nicking the surface of the screen protector when squeegee-ing the bubbles out. I think I could easily get it on there next time with zero bubbles. Way less hassle than any other attempt I have had with a film screen protector. One complaint I have is that they only included one alcohol wipe (everything else is in multiples), I don't know if I just got unlucky or they aren't thinking. Anyways, I have access to many solvents at work. No big deal for me.
Result:
How does it feel? A bit more plasticy than the usual glass screen protector but otherwise surprisingly nice. It adheres to the curves perfectly with no major bubbles, clarity-wise it is crystal clear. I honestly can't tell it is there. It adheres nicely to the curves of the display without any gaps (other than my nicks at the edge). My Otterbox Commuter case fits right over the top of it with ZERO problems. I was expecting these to be a stop-gap measure until the better glass ones come out but honestly I don't see anything wrong with these as is and would be just fine using these alone. I am not sure about longevity as I just installed it but so far I am actually surprisingly happy with it, especially for the cost. If you are on the fence between glass and plastic. Go with these plastic screen protectors for now and let the manufacturers work out the difficulties of the glass ones. Then you can decide later if you really want the glass one for you phone.
Link:
https://www.amazon.com/gp/product/B01B1GQDGG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
it will get scratched to **** within 2 weeks don't worry. Then you'll have to use another of the 3 that came with it.
Agreed with everything that OP posted, and agreed with the person above. Mine got scratched within a day but I got over it.
I installed one only because I tried three different Temper glass ones and none sealed correctly. I like it so far installed very good, covers the entire screen. So far so good.
I got a soft screen protector from AliExpress. It's a bit tricky to apply at first but once you get the idea it's not so bad.
The screen protector is really good! It's like silicon , doesn't get scratched easily.
Best part? it's 1.4$ each! What else can you ask for..?
Link:
http://www.aliexpress.com/item/For-LG-G5-Full-Coverage-Soft-Screen-Protector-Guard-Film-for-LG-G5/32618522429.html?spm=2114.13010608.0.54.iHJztH
Here:
Yup good screen protector but it does scuff, so is it perfect no, but one of the better non temper glass protector
I just tried and failed to apply all three. I can't be doing with bubbles or marks on the screen, and who in their right mind decided to put adhesive on a screen protector.
First one too many bubbles, second one, dust, bubbles and scratches, third one, same.
Add to the fact it feels like a ZAGG invisible shield, rubbery rather than glassy.. I will keep it naked from now on.
I have an Xtreme skin skin to install, wish me luck, i'll bloody well need it haha.
Jonathan-H said:
I just tried and failed to apply all three. I can't be doing with bubbles or marks on the screen, and who in their right mind decided to put adhesive on a screen protector.
First one too many bubbles, second one, dust, bubbles and scratches, third one, same.
Add to the fact it feels like a ZAGG invisible shield, rubbery rather than glassy.. I will keep it naked from now on.
I have an Xtreme skin skin to install, wish me luck, i'll bloody well need it haha.
Click to expand...
Click to collapse
I got the dark oak Xtremeskin!
I've put on a tempered glass before, it was kinda bad, lost saturation and brightness, and i got a clear case from spigen, but the case's lips protudes to the center so much that it started to push the screen protectir out!, I eventually removed the tempered glass... Not usre which screen protector to apply on with the spigen case :/
The Spigen Crystal Clear is too thin in my opinion - I killed it within a week. My old Spigen Steinheil Ultra on the S4 was way better. Purchased a CrocFol Premium instead.
Yup I have to change my opinion as well, used it for a bit, scuffed easily, stays clear without the rainbow effect. I had a few defects in my screen protectors, changed them out. Using the otterbox Defender case for now.
1$ tempered glass (rectangular) from AliExpress are perfect of you dont care leaving the top curved part unprotected. No bubbles, no rainbows, no effect on colors\contrast\clarity.
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
sn0warmy said:
Now that people are starting to receive their phones and accessories from OnePlus, I am very curious to hear people's thoughts on the official tempered glass protector offered from OnePlus.
Specifically, how does it fit with the OEM cases OnePlus offers. Most importantly, does it fit with the thicker OnePlus Bumper cases?
The good news, according to OnePlus's official install video posted on their website, it does look like it fully adheres to the screen.
https://www.oneplus.com/oneplus-6-3d-tempered-glass-screen-protector
Looking forward to feedback before I place an order for one to potentially replace the pre-applied plastic screen protector.
Click to expand...
Click to collapse
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
suprstar29 said:
I don't get my phone until later today, so I can not confirm until then. But the two different customer service reps I talked to guaranteed the TGP works with the OEM bumper cases. They said the only case it isn't compatible with is the outterbox case.
Click to expand...
Click to collapse
Looking forward to your results! If it does fit with the OEM bumper case (specifically the Nylon bumper case for me) I'll use my $20 promo voucher to order the glass protector as well.
I will say the preapplied plasic protector surprised me.wkth how good it feels. I usually do a glass protector but once I get my I will probably leave the plasitc on to see how it wears. Be good for the long term review since most on even know it's there at first
Sent from my Pixel 2 using Tapatalk
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
unfortunately my preapplied screen protector is a tiny bit too high for my taste too, so when swiping up with gestures enabled you can feel the slight edge :/
I really hope whitedome is going to bring a TGSP for the OP6 on the market
niijonodhg said:
Here take a look at this. I''ve just posted it to the official forums to I'll C+P here;
----
Hi all,
Hope you've not forgotten me! I'm back. I went down to the London launch as I was super excited to see the OnePlus 6 in person and I've now got my hands on the phone and the official tempered glass. So as I have done every year, I'm going to be testing out as many accessories that I can get my hands on, starting with the Official Tempered Glass Screen Protector!
Feel free to watch the video to get all this information, or just scroll down and read it if you prefer!
Some of you wonder why take of the pre-applied factory screen? Well for me, it's all about finding the best protection for your device and from experience the pre-applied screen is not that. It's a nice bonus, as if you're not buying the official you'll have to wait around a week or so before third party manufacturers get screens ready for sale. Mine was also riding slightly high on the screen, which meant using it whilst having gestures turned on was a bit of a nightmare.
As usual the screen protector, comes well packaged, with some excellent tools- most of which you won't need if you're taking the pre-applied screen off and then putting this one on straight away.
The screen protector as with the last few years comes on a single slab of plastic/glass, which you will need to be careful off when you're removing the screen protector from it. I've seen many people CRACK their screen protector at this point. Don't be that person! Go slow, but surely. And for goodness sake once you've peeled it off, don't turn it around and let all the dust particles in your house get on it!
The screen protector fits nicely on the phone and feels pretty decent. High quality!
Postives -
- Feels good
- Looks good
- Fits with the free case
Negatives -
- Finger print magnet - seriously, had it on for a few minutes and it was covered.
- Still has the black border, so you DO still get a 3D effect where you're missing an (admittedly small) portion of your screen
- Hardest OP screen protector I've ever put on.
Let me know if you have any questions on it, and I'll endeavor to keep you all updated on how it functions!
Thanks!
Click to expand...
Click to collapse
Thanks for this! Your videos are always great when it comes to these things. Keep up the great work!
Do you think the bit the pops up might simply be just because of the curvature of the screen towards the corner?
(curved screened phones are always a nightmare when it comes to putting screen protectors on). If the underside of the screen protector is curved aswell in order to fit the curved screen of the device, even a fraction of difference can cause these kinds of problems, whereas flat ones you can even get away with them positioned slightly off, and they will always sit down perfectly flat.
Can you confirm whether the curvature of the OnePlus 6's screen is just around the edges, or is it the whole of the front that is actually curved?
(If you see what I mean).
I could be wrong, but from what I can see on the video, it does almost look like it's the whole screen that is rounded and not just the edges (but it's hard to tell from a video, so can't know for sure)
sn0warmy said:
^ Dang! I can't believe how difficult it was for him to remove the bubbles with that protector. And in the end it still had a bubble that kept returning. This sure did make me glad I opted not to pay extra for that tempered glass protector. It's almost as if it doesn't have strong enough adhesive.
Regardless, I plan on sticking with the pre-applied screen protector for a bit before making a decision on a glass protector. In fact, if the pre-applied protector holds up well, I may not ever bother taking it off. I must say that it would be really nice to finally get a phone and never even worry about spending money on a screen protector, or trying to perfectly apply one, for that matter.
I just hope my pre-applied protector isn't positioned too high, as the above video reviewer mentioned his was.
Click to expand...
Click to collapse
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
jlczl said:
My pre-applied protector only lasted an hour on mine. The edges don't stick enough to avoid random lint and dust from sliding just a bit underneath it. Also the swipe up gestures from the bottom of the phone feel weird as you bump the protector. I'm not sure but I think it's because the protector is a bit thick.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
That’s a shame. My phone arrives today and we leave for Mexico tomorrow for a week. I was hoping the pre-applied protector would be perfect. The edges of it are probably going to look like garbage by the time we get back.
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
unix2208 said:
the protective film, can not attach clean and then Euro 22, so I can not recommend. Shade for the money
Click to expand...
Click to collapse
What?
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
This is a problem with all "curved edge" phones. Really makes me wish Samsung did not have as much sway in the market as they do. We would still have flat screens!
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
Sent from my Pixel 2 using Tapatalk
suprstar29 said:
I really like the TGP. It fits seamlessly with the nylon case where the edges go all the way to the case and it feels completely natural. I thought the black outlining would bother me, but it works really well with the phone. I highly recommend the OEM TGP. No issues with it being compatible with the bumper case.
Click to expand...
Click to collapse
More importantly, how difficult was it to get a bubble free install?
JCreations said:
I have read on a Dutch forum that there is only glue on the edges of the screen protector. The middle is coated with some sort of oil so you won't see any bubbles.
This would explain the YouTube video with the corner not sticking. Could somebody confirm this?
Click to expand...
Click to collapse
The tempered glass screen protector from OnePlus has adhesive throughout the entire protector, not just around the sides. Watch an install video and you'll see.
sn0warmy said:
More importantly, how difficult was it to get a bubble free install?
Click to expand...
Click to collapse
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
suprstar29 said:
It wasn't to bad. There were a couple of stubborn small bubbles, but it you press and hold on them for a second or two with the included tool they go right away. I have a completely bubble free TGP that took maybe 2 minutes to put on
Click to expand...
Click to collapse
Well crap. Now I wish I went ahead and ordered the protector with the phone. Now I've got to get through a week in Mexico with the pre-applied protector and hope it doesn't peel up until I get back.
Ordering the TGSP from OnePlus right now. Thanks for your input.
Just installed it and it looks great in my opinion! Wasn't that hard. If you apply it with the included case on, it helps a ton with lining it up; you literally just need to drop it into place.
I did get a couple pieces of dust underneath but they are super small and hardly noticeable, so I don't want to risk lifting the protector to remove it (risking more dust to get under) (or risking losing adhesion).
It does have a bit of that "3D look" but I got used to it very quick and now I don't notice it.
If there is text way at the edge of the screen, it does slightly get cut off but luckily most apps/websites don't have text that close to the edge.
Overall it's a solid protector and I'm probably going to stick with it until the end of its life (unless it cracks or something of course lol).
Disclaimer: No, I don't work for QiMai or the seller on Amazon. I'm just a guy who has been struggling with screen protectors since the S8+, and finally found one I'm 100% satisfied with. So I figured I'd share.
I was using the Cubevit PET screen protector and loved it, but it was a fingerprint magnet, and like all PET screen protectors got pretty scratched up.*Otherwise it's a FANTASTIC screen protector and only $8 for a 3-pack.
I had put a QiMai TPU screen protector on my wife's S9+, and you could barely tell it was there. I have to occasionally pick up her phone and look really close to make sure it's still on there. But since it was TPU I worried about it having that rubbery feel, and the SPen leaving marks.*
Since the QiMai was only $10 for a 2-pack, I decided to give it a try on my Note 9 anyway, and seriously, it's the best screen protector out there. It may not offer the drop protection of a Whitestone Dome, but as far as clarity and feel, there's no equal.*
It is crystal clear. Matter of fact it covers the FF camera and all the sensors, but it causes no distortion or interference. And it's almost as slick as the factory glass. It has no rubbery drag at all. And fingerprints wipe away very easy. And no indents from the SPen, unless you really dig in. Even then they disappear quickly.*
Ringke makes a similar screen protector, as does a few other companies, but I haven't tried them. Here is the link to the QiMai if you all want to try it.*
Galaxy Note 9 Screen Protector, 2-Pack QiMai Case Friendly Easy Install Screen Cover(Not Glass)[New Version]*https://www.amazon.com/dp/B07H2ZW9PG..._q.BfCbVBPDM3J
So far no interference with my cases. I use a Ringke Air, a Speck Grip, and a couple minimal generic TPU cases. So nothing that really comes far over the edge of the screen. I'll be ordering some Goosperry cases soon, but I don't see where they would interfere either.
Installation is easy, but it's also easy to get lint under it. It took me four tries. The first one was 95% perfect except for a bubble from lint in the top right corner. The second one got a bubble for an unknown reason that wouldnt go away. Small bubbles disappear after 24 hours. But this one wouldn't. Otherwise it was almost perfect.
I reached out to the seller and he sent me a free replacement 2-pack. I screwed up the first one, but finally the last one went on perfectly.
I do think I'll try the Ringke version of this screen protector next time, simply because it was a built in lint remover that picks up all lint and dust as you install automatically. But I've got no experience with the Ringke to know if it's as smooth as this one.
If you want a tempered glass screen protector, then go for the Whitestone Dome. But if you like thin, minimal screen protectors that you can't tell is there, then I highly recommend this one.
UPDATE: I accidentally tore my QiMai screen protector, so I used the opportunity to try the Ringke Dual. It's the same exact material and fit as the QiMai. It just as clear, but is slightly easier to install. It seems to be more oleophobic, yet not quote as slick as the QiMai. They are both super smooth to the touch, but the Ringke seems to have just slightly more drag to it.
But I can say I like both screen protectors and you can't go wrong with either one.
Mr. Orange 645 said:
Disclaimer: No, I don't work for QiMai or the seller on Amazon. I'm just a guy who has been struggling with screen protectors since the S8+, and finally found one I'm 100% satisfied with. So I figured I'd share.
I was using the Cubevit PET screen protector and loved it, but it was a fingerprint magnet, and like all PET screen protectors got pretty scratched up.*Otherwise it's a FANTASTIC screen protector and only $8 for a 3-pack.
I had put a QiMai TPU screen protector on my wife's S9+, and you could barely tell it was there. I have to occasionally pick up her phone and look really close to make sure it's still on there. But since it was TPU I worried about it having that rubbery feel, and the SPen leaving marks.*
Since the QiMai was only $10 for a 2-pack, I decided to give it a try on my Note 9 anyway, and seriously, it's the best screen protector out there. It may not offer the drop protection of a Whitestone Dome, but as far as clarity and feel, there's no equal.*
It is crystal clear. Matter of fact it covers the FF camera and all the sensors, but it causes no distortion or interference. And it's almost as slick as the factory glass. It has no rubbery drag at all. And fingerprints wipe away very easy. And no indents from the SPen, unless you really dig in. Even then they disappear quickly.*
Ringke makes a similar screen protector, as does a few other companies, but I haven't tried them. Here is the link to the QiMai if you all want to try it.*
Galaxy Note 9 Screen Protector, 2-Pack QiMai Case Friendly Easy Install Screen Cover(Not Glass)[New Version]*https://www.amazon.com/dp/B07H2ZW9PG..._q.BfCbVBPDM3J
So far no interference with my cases. I use a Ringke Air, a Speck Grip, and a couple minimal generic TPU cases. So nothing that really comes far over the edge of the screen. I'll be ordering some Goosperry cases soon, but I don't see where they would interfere either.
Installation is easy, but it's also easy to get lint under it. It took me four tries. The first one was 95% perfect except for a bubble from lint in the top right corner. The second one got a bubble for an unknown reason that wouldnt go away. Small bubbles disappear after 24 hours. But this one wouldn't. Otherwise it was almost perfect.
I reached out to the seller and he sent me a free replacement 2-pack. I screwed up the first one, but finally the last one went on perfectly.
I do think I'll try the Ringke version of this screen protector next time, simply because it was a built in lint remover that picks up all lint and dust as you install automatically. But I've got no experience with the Ringke to know if it's as smooth as this one.
If you want a tempered glass screen protector, then go for the Whitestone Dome. But if you like thin, minimal screen protectors that you can't tell is there, then I highly recommend this one.
Click to expand...
Click to collapse
Nice, is it just a film protector?
felloffthetruck said:
Nice, is it just a film protector?
Click to expand...
Click to collapse
Yup. Dry install TPU film.
The link is borked, though Was easy to find with search, but still..
does the S-PEN leaves marks on the film after using it for a while ?
6thtry said:
The link is borked, though Was easy to find with search, but still..
Click to expand...
Click to collapse
Sorry about that! Try this link:
Galaxy Note 9 Screen Protector, 2-Pack QiMai Case Friendly Easy Install Screen Cover(Not Glass)[New Version] https://www.amazon.com/dp/B07H2ZW9PG/ref=cm_sw_r_cp_apa_i_43agCbXE0S0MW
emudojo said:
does the S-PEN leaves marks on the film after using it for a while ?
Click to expand...
Click to collapse
I actually covered that in my original post:
Mr. Orange 645 said:
And no indents from the SPen, unless you really dig in. Even then they disappear quickly.*
Click to expand...
Click to collapse
Was just looking at the Ringke and it has no install guide.
I've always hated film protectors but might give this one a try.
Does it peel off easy and clean?
So my first package of tg was a failure. Neither stuck to the screen. Returning to Amazon. My whitestone (which I'm not sure now if I'll end up using now) is still a few days away, so I ordered this to have coverage. It will be here tomorrow.
felloffthetruck said:
Was just looking at the Ringke and it has no install guide.
I've always hated film protectors but might give this one a try.
Does it peel off easy and clean?
Click to expand...
Click to collapse
Yes it peels off easy and clean. No adhesive residue.
I actually JUST switched to the Ringke screen protector. LOL. I put my Note 9 in a sleeve to carry it without a case, and the corner of the screen protector peeled up and tore. So I ordered the Ringke to try it out. I like it just as well as the QiMai. There's some subtle differences. The Ringke is actually easier to install. And even though the QiMai feels just slightly slicker than the Ringke, I think the Ringke is more oleophobic. You honestly can go wrong with either one.
PuffinNugz said:
So my first package of tg was a failure. Neither stuck to the screen. Returning to Amazon. My whitestone (which I'm not sure now if I'll end up using now) is still a few days away, so I ordered this to have coverage. It will be here tomorrow.
Click to expand...
Click to collapse
What did you think of it?
Mr. Orange 645 said:
Yes it peels off easy and clean. No adhesive residue.
I actually JUST switched to the Ringke screen protector. LOL. I put my Note 9 in a sleeve to carry it without a case, and the corner of the screen protector peeled up and tore. So I ordered the Ringke to try it out. I like it just as well as the QiMai. There's some subtle differences. The Ringke is actually easier to install. And even though the QiMai feels just slightly slicker than the Ringke, I think the Ringke is more oleophobic. You honestly can go wrong with either one.
What did you think of it?
Click to expand...
Click to collapse
How well does the dust removal deal work on the Ringke?
felloffthetruck said:
How well does the dust removal deal work on the Ringke?
Click to expand...
Click to collapse
Not that great, actually. I think they could have used a little stronger adhesive, but it's okay. I wound up with one speck of dust on the very edge, but I also used a dust absorber from another screen protector kit to remove any heavy lint and dust.
It turned out about 99.9% perfect, which is the best I can expect from any screen protector. I always end up with some speck of dust or bubble somewhere. It's just so hard without an actual clean room.
I will say the screen protector is absolutely invisible. You have to look very hard to see it. And the more I use it, the slicker it feels.
Just make sure it's straight and aligned before you peel off the backing (tab 2 and 3). I had to readjust mine a few times to get it straight and centered left to right. That is one advantage to this installation method. You can readjust it as much as you want before you actually secure it permanently to the screen.
Mr. Orange 645 said:
Not that great, actually. I think they could have used a little stronger adhesive, but it's okay. I wound up with one speck of dust on the very edge, but I also used a dust absorber from another screen protector kit to remove any heavy lint and dust.
It turned out about 99.9% perfect, which is the best I can expect from any screen protector. I always end up with some speck of dust or bubble somewhere. It's just so hard without an actual clean room.
I will say the screen protector is absolutely invisible. You have to look very hard to see it. And the more I use it, the slicker it feels.
Just make sure it's straight and aligned before you peel off the backing (tab 2 and 3). I had to readjust mine a few times to get it straight and centered left to right. That is one advantage to this installation method. You can readjust it as much as you want before you actually secure it permanently to the screen.
Click to expand...
Click to collapse
Can you post a couple pictures showing this protector on the phone?
felloffthetruck said:
Can you post a couple pictures showing this protector on the phone?
Click to expand...
Click to collapse
Sure. If not today, I'll snag some pics tomorrow.
felloffthetruck said:
Can you post a couple pictures showing this protector on the phone?
Click to expand...
Click to collapse
This is the Ringke screen protector. I didn't get any pics of the QiMai protector.
Those specs are dust ON the screen protector, not under it.
Mr. Orange 645 said:
This is the Ringke screen protector. I didn't get any pics of the QiMai protector.
Click to expand...
Click to collapse
WOW, that looks nice. I'll have to give them a try.
Did you get that result on the first try?
felloffthetruck said:
WOW, that looks nice. I'll have to give them a try.
Did you get that result on the first try?
Click to expand...
Click to collapse
Yes I did. But I cheated a little. I also bought the same screen protector for my Note 8 and installed it first. So I at least had some practice.
Just use as close to a dust free environment as you can. Then clean your screen really well, remove all dust with a dust remover if you have it, then take your time lining up the screen protector. Remember, you can lift it and readjust as many times as you want before you pull tab 2 and secure it permanently.
Fellow Members I will be reviewing loads of screen protectors, cases and accessories for the Huawei P30 Pro, I am open to questions and requests to help my fellow XDA members so please feel free to ask away.
Huawei P30 Pro Spigen Screen Protector Review
Need a screen Protector for your P30 Pro? Spigen Neo Flex for the Huawei P30 Pro:
Here is the link to the video: https://youtu.be/gHxA46EoALs
Please read this as it might answer your questions without having to watch the video above.
I am going to be installing the Spigen Neo Flex tpu screen protector on the Huawei P30 Pro. So what do you get inside the package? 2 screen protectors, the application fluid and yes this is a wet install, we also get a microfiber cloth, dust removal stickers and the squeegee. Now time to start the application, Firstly leave a spigen case on your p30 pro as it helps to align the screen protector, then using the microfiber cloth give the screen a good wipe. Once done and the screen is clean use the dust removal stickers to remove any residual dust or lint particles.
Now take the application fluid and spray it on your fingers and peel the backing off the screen protector and give the back of it a good spray as it makes it easier to line up the protector. Once aligned use the squeegee to make a vertical parting along the centre of the screen. Then using the squeegee gently remove the liquid from under the screen protector pushing it out from the centre of the screen to the edges, once this is done using the cloth gently push the edges down so they stick to the curved edges of the screen and then wipe any excess fluid from the screen protector and from around the p30 pro. There will be some bubbles left and a little fluid under the screen protector but trust me give the phone 6 to 24 hours and a perfectly applied bubble free screen protector.
Visibility is perfectly fine and there are some slight gaps around the screen protector making sure that it works with cases. The surface has a slight orange peel look to it but it is very smooth to the touch, The fingerprint sensor works perfectly as if the screen was bare, it does pick up some finger grease but no more than a glass protector and they wipe off with ease. I have tried this screen protector with all the official cases, spigen cases and Ringke cases and it works perfectly. The alignment is perfect and overall a highly recommended screen protector for your P30 Pro.
ramheer said:
Need a screen Protector for your P30 Pro? Spigen Neo Flex for the Huawei P30 Pro:
Here is the link to the video:
Please read this as it might answer your questions without having to watch the video above.
I am going to be installing the Spigen Neo Flex tpu screen protector on the Huawei P30 Pro. So what do you get inside the package? 2 screen protectors, the application fluid and yes this is a wet install, we also get a microfiber cloth, dust removal stickers and the squeegee. Now time to start the application, Firstly leave a spigen case on your p30 pro as it helps to align the screen protector, then using the microfiber cloth give the screen a good wipe. Once done and the screen is clean use the dust removal stickers to remove any residual dust or lint particles.
Now take the application fluid and spray it on your fingers and peel the backing off the screen protector and give the back of it a good spray as it makes it easier to line up the protector. Once aligned use the squeegee to make a vertical parting along the centre of the screen. Then using the squeegee gently remove the liquid from under the screen protector pushing it out from the centre of the screen to the edges, once this is done using the cloth gently push the edges down so they stick to the curved edges of the screen and then wipe any excess fluid from the screen protector and from around the p30 pro. There will be some bubbles left and a little fluid under the screen protector but trust me give the phone 6 to 24 hours and a perfectly applied bubble free screen protector.
Visibility is perfectly fine and there are some slight gaps around the screen protector making sure that it works with cases. The surface has a slight orange peel look to it but it is very smooth to the touch, The fingerprint sensor works perfectly as if the screen was bare, it does pick up some finger grease but no more than a glass protector and they wipe off with ease. I have tried this screen protector with all the official cases, spigen cases and Ringke cases and it works perfectly. The alignment is perfect and overall a highly recommended screen protector for your P30 Pro.
Click to expand...
Click to collapse
Thanks for the review! Useful indeed.
Have you had a chance to try any tempered glass screen protector on the P30 Pro?
hunhool said:
Thanks for the review! Useful indeed.
Have you had a chance to try any tempered glass screen protector on the P30 Pro?
Click to expand...
Click to collapse
I've been using this one and it's got a good overall coverage, only a small amount of rainbow effect and does the job of keeping the look and feel the same..
https://amzn.to/2WZjVAS
Best Huawei P30 Pro Full Adhesive Glass Screen Protector
The Best Huawei P30 Pro Full coverage, Full Adhesive Glass Screen Protector, Link to the Video: https://youtu.be/xnBzU40oVkw
Please read below before watching the video as it may answer your questions.
oday I am going to be installing a full adhesive glass screen protector on the Huawei P30 Pro made by a company called Anewsir. So what do you get inside the package? 2 glass screen protectors, the application glue, dry and wet wipes, a battery powered UV lamp and dust removal stickers. Now time to start the messy application, Firstly then using the alchol wipe give the screen a once over then using the dry wipe remove any excess fluid. Once done and the screen is clean use the dust removal stickers to remove any residual dust or lint particles.
Now take the bottle of glue and let it pour out slowly onto the centre of the screen giving it a minute or so to ensure the glue is fully expelled from the bottle. Some top tips before applying the glue make sure the surface your Huawei p30 pro is laying on is level and p lace a small cloth or tissue under it to absorb any glue that might seep out during the installation. Time to peel the backing off the glass screen protector and slowly line it up with the screen using the notch as a reference point and now lay it down gently and sit back allowing the glue to spread evenly to every edge and corner of the screen protector. Don’t move the P30 Pro or the screen protector at this point as it can cause bubbles to form. Time to cure the glue, switch on the UV lamp and move it slowly up and down the screen slowly for 3 minutes, wipe the phone down and done.
As you can see the visibility is great and there are some slight gaps around the screen protector including the notch, making sure that it works with every case I tried such as the official, spigen and Ringke cases. The surface has a smooth oleophobic coating on it making it a breeze to slide your finger around, The fingerprint sensor works just as well as if no screen protector is being used, it does pick up some finger grease but no more than any other glass protector and they wipe off easily. The alignment is perfect plus being glass it is more protective in a drop than the tpu style screen protectors, overall a highly recommended screen protector for your P30 Pro.
hunhool said:
Thanks for the review! Useful indeed.
Have you had a chance to try any tempered glass screen protector on the P30 Pro?
Click to expand...
Click to collapse
Yes I have just uploaded a video for a glass screen protector.
Love those icons in the video, would you mind letting me know what they are?
nibs777 said:
Love those icons in the video, would you mind letting me know what they are?
Click to expand...
Click to collapse
The theme is called black from the Huawei theme store
What kind of tempered glass do you guys advice? I've a full covered one with only glue on the edges. It feels like it's not fitting properly
I used the g colour glass protector. Works great.
Supreme_One said:
What kind of tempered glass do you guys advice? I've a full covered one with only glue on the edges. It feels like it's not fitting properly
Click to expand...
Click to collapse
Ordered and received this:
https://www.gsmpunt.nl/screen-protectors/panzerglass-huawei-p30-pro-case-friendly-screenprotector
So far so good. Nothing to complain.
Also, just ordered this case: https://www.amazon.de/dp/B07P7NTV5S/ref=cm_sw_r_cp_apa_i_an3TCb33ECDDQ
hunhool said:
Ordered and received this:
https://www.gsmpunt.nl/screen-protectors/panzerglass-huawei-p30-pro-case-friendly-screenprotector
So far so good. Nothing to complain.
Also, just ordered this case: https://www.amazon.de/dp/B07P7NTV5S/ref=cm_sw_r_cp_apa_i_an3TCb33ECDDQ
Click to expand...
Click to collapse
Hahah Nederlander
I try many tempered glass.Regular or glue+ UV ..Few days and all go to trash can.
Only correct solution me Clearplex (Media Markt hungary)
This stuff like hydrogel ol spiegen same stuff.
https://www.youtube.com/watch?v=vth0sv-7rLQ
Diggin' the Huawei Flip Cover Case
I have never been a fan of flip cover cases... but for the first time, I am really liking Huawei's flip cover case. Closes nice a tight... Looks good and is not at all bulky like other flip cases can be. The only time I can see me going back to my Huawei Silicon case is when I know I'm going to take a lot of pictures, like at a concert or something, to avoid having to keep flipping open and to have a slightly better grip on the phone. The only other weird issue I found is that I cannot use the flip cover close and hook up to Android Auto... Doing so creates a white bar at the top on my radio screen, don't know if this is due to my cars radio or it is something that follows the phone when using that case... maybe someone else can try it out, would be curious if they see the same thing... However, if I disconnect, open the cover and turn it behind the phone then hook up to Android Auto, everything is fine... Weird bug but easily overcome... :good:
Glass screen protectors are cool on curved screens, but for a few days/weeks. Then they start to wear off.. I'd want to hear after a while you've been using it, and especially with a case on the phone as well...
I think i am going to wait to see what noreve's case is going to be like, it shows at the moment as they are in the middle of making them, they are usually extremely good quality though
Supreme_One said:
Hahah Nederlander
Click to expand...
Click to collapse
And why is it so funny for you?
---------- Post added at 10:13 PM ---------- Previous post was at 10:11 PM ----------
Piero88 said:
Glass screen protectors are cool on curved screens, but for a few days/weeks. Then they start to wear off.. I'd want to hear after a while you've been using it, and especially with a case on the phone as well...
Click to expand...
Click to collapse
Check my post above. Tempered glass screen and case were arrived the same date. Installed both(glass is case friendly) so far soo good.
mahst68 said:
I have never been a fan of flip cover cases... but for the first time, I am really liking Huawei's flip cover case. Closes nice a tight... Looks good and is not at all bulky like other flip cases can be. The only time I can see me going back to my Huawei Silicon case is when I know I'm going to take a lot of pictures, like at a concert or something, to avoid having to keep flipping open and to have a slightly better grip on the phone. The only other weird issue I found is that I cannot use the flip cover close and hook up to Android Auto... Doing so creates a white bar at the top on my radio screen, don't know if this is due to my cars radio or it is something that follows the phone when using that case... maybe someone else can try it out, would be curious if they see the same thing... However, if I disconnect, open the cover and turn it behind the phone then hook up to Android Auto, everything is fine... Weird bug but easily overcome... :good:
Click to expand...
Click to collapse
Is this the smart view case?
If so can you let me know if it shows 3rd party notifications now?
rajziel said:
Is this the smart view case?
If so can you let me know if it shows 3rd party notifications now?
Click to expand...
Click to collapse
It is the smart view case... I have seen notifications on it but I only think it's for the baked in apps. I guess I haven't paid a lot of attention since it takes just as much time to just flip it open then look then worrying about the smart view screen. I also don't have it on wake for notifications which I think may play a part. Let me mess around with a few settings and see what I come up with :laugh:
mahst68 said:
It is the smart view case... I have seen notifications on it but I only think it's for the baked in apps. I guess I haven't paid a lot of attention since it takes just as much time to just flip it open then look then worrying about the smart view screen. I also don't have it on wake for notifications which I think may play a part. Let me mess around with a few settings and see what I come up with :laugh:
Click to expand...
Click to collapse
Cheers
I have an unofficial smart view case and that doesnt show whatsapp notifications.
its not a major issue but if the official one does show them I may have to get one.