Related
EDIT: made a typo the first few tries!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
please see post #2
i was making a mistake. the correct command line is
adb devices
adb reboot bootloader
adb sideload update.zip
in this last command line it says:
loading : 'update.zip'
error: device not found
what now? when i type adb devices it sees my phone before rebooting into bootloader. after i reboot into bootloader and i type adb devices it does not give me any result
cesar.maranhao said:
i was making a mistake. the correct command line is
adb devices
adb reboot bootloader
adb sideload update.zip
in this last command line it says:
loading : 'update.zip'
error: device not found
what now? when i type adb devices it sees my phone before rebooting into bootloader. after i reboot into bootloader and i type adb devices it does not give me any result
Click to expand...
Click to collapse
If you're booted in to the bootloader you need to use fastboot commands, fastboot devices. That still doesn't address your problem though. You need to be booted into recovery to sideload the zip, not the bootloader
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
If you're booted in to the bootloader you need to use fastboot commands, fastboot devices. That still doesn't address your problem though. You need to be booted into recovery to sideload the zip, not the bootloader
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
thanks, I see I am doing it all wrong..
i have found this guide
http://forum.xda-developers.com/showthread.php?t=2559200
when i get to the
adb usb
it also says device not found despite the deamon starting successfully on port 5037... i will need help please
cesar.maranhao said:
thanks, I see I am doing it all wrong..
i have found this guide
http://forum.xda-developers.com/showthread.php?t=2559200
when i get to the
adb usb
it also says device not found despite the deamon starting successfully on port 5037... i will need help please
Click to expand...
Click to collapse
First off, you need the stock recovery, not twrp or cwm to flash the update.zip. If you don't have the stock recovery you'll need to flash it in fastboot with the recovery.img from 5.0. Are you on the stock recovery? Also, are you rooted?
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
If you're booted in to the bootloader you need to use fastboot commands, fastboot devices. That still doesn't address your problem though. You need to be booted into recovery to sideload the zip, not the bootloader
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
jd1639 said:
First off, you need the stock recovery, not twrp or cwm to flash the update.zip. If you don't have the stock recovery you'll need to flash it in fastboot with the recovery.img from 5.0. Are you on the stock recovery? Also, are you rooted?
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
yes, i am rooted with twrp custom recovery.
i tried to install the ota zip from the custom recovery. the ota file i downloaded and it failed. i tried all three options you see in this topic:
http://forum.xda-developers.com/google-nexus-5/general/ref-nexus-5-stock-ota-urls-t2475327
what should i do then?
1. Its adb reboot-bootloader to reboot into the bootloader.
Have to choose recovery from the bootloader, then press and hold power button then press volume up once to be able to choose adb sideload and press power. Once choosing this option from recovery then check adb devices. If it doesn't recognize your device then the USB drivers are not installed properly. Go to device manager on your PC to install the correct drivers. There are a few post already about this. Alternately you can use universal naked drivers. These work very well with Nexus devices.
2. Have to be completely stock to apply the OTA. Simply clicking unroot via supersu does not allow the update to apply.
---------- Post added at 03:50 PM ---------- Previous post was at 03:48 PM ----------
http://forum.xda-developers.com/goo...nosing-usb-driver-adb-issues-windows-t2514396
cesar.maranhao said:
yes, i am rooted with twrp custom recovery.
i tried to install the ota zip from the custom recovery. the ota file i downloaded and it failed. i tried all three options you see in this topic:
http://forum.xda-developers.com/google-nexus-5/general/ref-nexus-5-stock-ota-urls-t2475327
what should i do then?
Click to expand...
Click to collapse
First unroot using the full unroot option in supersu settings. Then you'll need to flash the system, recovery, and boot images from 5.0 with fastboot. Then you can sideload the update.zip in the stock recovery. If you've changed the radio you'll have to flash that from 5.0 too
It's a pita. The other option is to just flash in fastboot the radio, system, and boot images from 5.0.1 and forgo the ota.
Either option won't wipe data
Sent from my Nexus 9 using XDA Free mobile app
Jnewell05 said:
1. Its adb reboot-bootloader to reboot into the bootloader.
Have to choose recovery from the bootloader, then press and hold power button then press volume up once to be able to choose adb sideload and press power. Once choosing this option from recovery then check adb devices. If it doesn't recognize your device then the USB drivers are not installed properly. Go to device manager on your PC to install the correct drivers. There are a few post already about this. Alternately you can use universal naked drivers. These work very well with Nexus devices.
2. Have to be completely stock to apply the OTA. Simply clicking unroot via supersu does not allow the update to apply.
---------- Post added at 03:50 PM ---------- Previous post was at 03:48 PM ----------
http://forum.xda-developers.com/goo...nosing-usb-driver-adb-issues-windows-t2514396
Click to expand...
Click to collapse
jd1639 said:
First unroot using the full unroot option in supersu settings. Then you'll need to flash the system, recovery, and boot images from 5.0 with fastboot. Then you can sideload the update.zip in the stock recovery. If you've changed the radio you'll have to flash that from 5.0 too
It's a pita. The other option is to just flash in fastboot the radio, system, and boot images from 5.0.1 and forgo the ota.
Either option won't wipe data
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I am so confused.. when i bought my nexus 5 i upgraded kitkat several times by flashing a downloaded OTA from xda forums inside custom recovery. i just flashed the update and flashed the supersu afterwards to keep root.
i do not understand what is happening now, i never done such steps before.
were those kitkat ota's modified by xda members to help not so knowledgeable users like me to update?
this is what I have been using:
EDIT:
Section B: Flashing in a Custom Recovery (TWRP- CWM)
(For Flashing 4.4.4 OTAs and Below ONLY!)
1) Download the OTA.zip and copy to your phone.
2) Boot into recovery.
3) Flash the OTA just like you would a ROM.
4) Reboot.
http://forum.xda-developers.com/google-nexus-5/general/info-nexus-5-ota-help-desk-t2523217
Click to expand...
Click to collapse
Just noticed thisis only for 4.4.4 OTA's and below only.
cesar.maranhao said:
I am so confused.. when i bought my nexus 5 i upgraded kitkat several times by flashing a downloaded OTA from xda forums inside custom recovery. i just flashed the update and flashed the supersu afterwards to keep root.
i do not understand what is happening now, i never done such steps before.
were those kitkat ota's modified by xda members to help not so knowledgeable users like me to update?
Click to expand...
Click to collapse
No the difference is 5 lollipop. They've changed the way it needs to be update. Before you could easily flash it in a custom recovery. You can't do that any more.
The easiest, and what I did is to just flash the radio, system and boot images from 5.0.1 in fastboot. Just download the factory image, it's a .tgz file. Extract it using 7-zip. Inside is a zip file, extract that too. In the first file is the radio image, it has a long name. In the zip file you extract is the system and boot images. You'll want to put those files in the same directory as you have fastboot.exe.
Then boot in to the bootloader and open a command window in the same folder as fastboot.exe and type the commands
fastboot flash radio radio.img (note, use the full file name of the radio)
fastboot flash boot boot.img
fastboot flash system system.img
Then you're done
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
No the difference is 5 lollipop. They've changed the way it needs to be update. Before you could easily flash it in a custom recovery. You can't do that any more.
The easiest, and what I did is to just flash the radio, system and boot images from 5.0.1 in fastboot. Just download the factory image, it's a .tgz file. Extract it using 7-zip. Inside is a zip file, extract that too. In the first file is the radio image, it has a long name. In the zip file you extract is the system and boot images. You'll want to put those files in the same directory as you have fastboot.exe.
Then boot in to the bootloader and open a command window in the same folder as fastboot.exe and type the commands
fastboot flash radio radio.img (note, use the full file name of the radio)
fastboot flash boot boot.img
fastboot flash system system.img
Then you're done
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
you missed my last edit while you were replying.
EDIT:
Section B: Flashing in a Custom Recovery (TWRP- CWM)
(For Flashing 4.4.4 OTAs and Below ONLY!)
1) Download the OTA.zip and copy to your phone.
2) Boot into recovery.
3) Flash the OTA just like you would a ROM.
4) Reboot.
http://forum.xda-developers.com/google-nexus-5/general/info-nexus-5-ota-help-desk-t2523217
Click to expand...
Click to collapse
Just noticed thisis only for 4.4.4 OTA's and below only.
Click to expand...
Click to collapse
it is more clear for me now. i used all those fastboot command line when i flashed 5.0.0, one line for each image.
i will do that for 5.0.1. thanks a lot mate for all the clarification.
one last question: will I lose any data/configurations by apllying this method?
cesar.maranhao said:
you missed my last edit while you were replying.
it is more clear for me now. i used all those fastboot command line when i flashed 5.0.0, one line for each image.
i will do that for 5.0.1. thanks a lot mate for all the clarification.
one last question: will I lose any data/configurations by apllying this method?
Click to expand...
Click to collapse
No data will be lost. Everything will still be there
Oh, you're custom recovery will be gone and you'll have to re-root but that's easy. If you have problems let me know.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No the difference is 5 lollipop. They've changed the way it needs to be update. Before you could easily flash it in a custom recovery. You can't do that any more.
The easiest, and what I did is to just flash the radio, system and boot images from 5.0.1 in fastboot. Just download the factory image, it's a .tgz file. Extract it using 7-zip. Inside is a zip file, extract that too. In the first file is the radio image, it has a long name. In the zip file you extract is the system and boot images. You'll want to put those files in the same directory as you have fastboot.exe.
Then boot in to the bootloader and open a command window in the same folder as fastboot.exe and type the commands
fastboot flash radio radio.img (note, use the full file name of the radio)
fastboot flash boot boot.img
fastboot flash system system.img
Then you're done
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
jd1639 said:
No data will be lost. Everything will still be there
Oh, you're custom recovery will be gone and you'll have to re-root but that's easy. If you have problems let me know.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
nice! i suppose i need to flash the custom recovery and root again right?
cesar.maranhao said:
nice! i suppose i need to flash the custom recovery and root again right?
Click to expand...
Click to collapse
Yep, flash the twrp.img in fastboot, fastboot flash recovery twrp.img (I recommend twrp, if you have a problem with this step let me know. It may try to keep the stock recovery). Then flash supersu 2.4 in twrp
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Yep, flash the twrp.img in fastboot, fastboot flash recovery twrp.img (I recommend twrp, if you have a problem with this step let me know. It may try to keep the stock recovery). Then flash supersu 2.4 in twrp
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
will you stay online for a while? if I run into trouble you already know what is going on
cesar.maranhao said:
will you stay online for a while? if I run into trouble you already know what is going on
Click to expand...
Click to collapse
I'll be here
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
I'll be here
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
hey there!
already flashed everything! after i flashed the twrp custom recovery, it said i wasn't rooted so i installed the root from there.
it then upgraded some apps and i confirm i am now in 5.0.1. however, root checker says i am not rooted and need to confirm in the specific forum how to root my device..
after this, i tried to go to twrp again but i have an android with a red exclamation mark upon its belly.
wht should i do?
cesar.maranhao said:
hey there!
already flashed everything! after i flashed the twrp custom recovery, it said i wasn't rooted so i installed the root from there.
it then upgraded some apps and i confirm i am now in 5.0.1. however, root checker says i am not rooted and need to confirm in the specific forum how to root my device..
after this, i tried to go to twrp again but i have an android with a red exclamation mark upon its belly.
wht should i do?
Click to expand...
Click to collapse
Put SuperSU beta flashable zip on your sdcard then fastboot flash TWRP. Boot directly into recovery and flash SuperSU
cesar.maranhao said:
hey there!
already flashed everything! after i flashed the twrp custom recovery, it said i wasn't rooted so i installed the root from there.
it then upgraded some apps and i confirm i am now in 5.0.1. however, root checker says i am not rooted and need to confirm in the specific forum how to root my device..
after this, i tried to go to twrp again but i have an android with a red exclamation mark upon its belly.
wht should i do?
Click to expand...
Click to collapse
I thought that would be the problem. You'll want to boot twrp, flash supersu and the flash twrp
fastboot boot twrp.img
Then flash supersu in twrp
Then boot back into the bootloader and
fastboot flash recovery twrp.img
There are couple of scripts, one in /system and one in /system/bin that put the stock recovery back on. You could remove the scripts put I find this easier
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
I thought that would be the problem. You'll want to boot twrp, flash supersu and the flash twrp
fastboot boot twrp.img
Then flash supersu in twrp
Then boot back into the bootloader and
fastboot flash recovery twrp.img
There are couple of scripts, one in /system and one in /system/bin that put the stock recovery back on. You could remove the scripts put I find this easier
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
rootSU said:
Put SuperSU beta flashable zip on your sdcard then fastboot flash TWRP. Boot directly into recovery and flash SuperSU
Click to expand...
Click to collapse
i am having problems in putting the supersu file into my nexus 5, it says the device has either stopped or has been disconnected.. this never happened before. i haveit setup as MTP. also tried ptp without success
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Useful and important general information can be found in the second post here.
NOTES
1. If you flash the TWRP Installer when you've already got Magisk installed, your device will keep booting to the recovery. You should be able to fix this by just simply reflashing Magisk.
2. If you have TWRP installed via the TWRP Installer, you will not be able to install stock OTA updates. You will have to reflash the stock boot image for whatever build you're running beforehand.
3. The prebuilt TWRP image may not have touch functionality if you're using the September 2018 Update or newer. Patching the boot image, however, for these builds with the TWRP Installer will allow touch to work flawlessly. Here is a pre-patched September 2018 Boot Image with TWRP. It should also work with builds newer than September. Since it's based off the September 2018 update, I suggest not using this as your main boot image but rather just as a replacement for the pre-built TWRP image from the official TWRP thread.
4. Simple "flash and forget" boot images pre-patched with Magisk and TWRP are provided by @aer0zer0 and are available here. They are based on ianmacd's variant of Magisk. If you are running stock, you can flash these boot images to get root and TWRP instead of following the guide to patch it yourself. Here is January's.
If you don't care about TWRP and simply want to just root your device, you can just simply patch the boot image for your ROM with the Magisk Manager and flash it in fastboot with
Code:
fastboot flash boot patched_boot.img
The link to the boot images for most stock builds can be grabbed from my Google Drive link in the second post or from the back-to-stock zips.
REQUIREMENTS
An unlocked bootloader
Working adb and fastboot environment, along with knowledge on how they work.
The latest build of TWRP along with the TWRP Installer. Read Note 3 above beforehand.
1. Download the latest build of TWRP and the TWRP Installer. Transfer the TWRP Installer zip to your device.
2. Reboot your phone into fastboot. Once in fastboot, change your device's current slot using the command
Code:
fastboot set_active other
If the command above doesn't work for you, use fastboot getvar current-slot followed by fastboot -aX, replacing "X" with the slot opposite (a or b) from your current slot.
3. Once your device's current slot has been switched, flash the TWRP image you downloaded earlier using the command
Code:
fastboot flash boot twrp.img
Depending on your version of fastboot, the above command might not work either. In that case, you can enter the following command, replacing "X" with your current slot (a or b).
Code:
fastboot flash boot_X twrp.img
4. Once TWRP has been flashed, boot into the recovery.
5. Once you have booted into TWRP, simply flash the TWRP Installer zip.
6. Once you have finished flashing the TWRP Installer zip, boot to recovery on the OPPOSITE slot. You can do this from TWRP by going to "Reboot", then selecting the opposite of the current slot (if on A, select Slot B. If on B, select Slot A), then select "Recovery." You can also do this through fastboot by running the same command from step 2.
7. Once you have booted back into TWRP, simply flash the Magisk zip and you are now good to go! Feel free to flash anything else like kernels while you're at it.
8. Reboot. :good:
NOTE: TWRP WILL remain installed on your device so long as you reflash the installer zip after every update.
Important Information for the Essential PH-1 can be found here. Keep it bookmarked.
Tips on updating via OTA after rooting can be found here.
In the case that you mess something up on your device, you may find it helpful to revert back to stock with the unofficial factory images graciously provided by @invisiblek and @aer0zer0 over here.
Official TWRP XDA Thread for the Essential PH-1
Join the Essential PH-1 Discord Server! -- Lots of cool people here!
Join the Essential PH-1 Development Telegram Channel!
Stock Boot Images for most builds can be found at my Google Drive link here.
Have a Red Verity Warning when booting your device? Click here.
If the link to the boot.fix.red image isn't working, you can also find it here or in my Google Drive link in the first post.
Essential Phone (PH-1) Partition Layout
Dumping Boot Images
1. Find the current slot with
Code:
fastboot getvar current-slot
or
Code:
adb shell getprop ro.boot.slot_suffix
2. Switch to the opposite slot in Fastboot using the command
Code:
fastboot set_active other
3. Flash TWRP using the command
Code:
fastboot flash boot twrp.img
4. Now, boot into TWRP and use the following command from your PC, replacing X in "boot_X" with the original slot from step 1 (a or b). TRIPLE CHECK:
Code:
adb shell dd if=/dev/block/bootdevice/by-name/boot_X of=/sdcard/boot.img
5. Profit! Don't forget to switch back to the original partition with the same command from step 2!
extractTarFork() error when restoring data from a TWRP backup
1. Reinstall the ROM from which the backup is based on.
2. Wipe your data. You can do this from the recovery or from fastboot using the command
Code:
fastboot -w
3. Boot into the ROM. When going through the initial setup, use the EXACT same security setup as the one from your backup. For example, if you used a Fingerprint + Password in the backed up ROM, use the exact same combo along with the exact same password as well. There is no need to set up anything else, like accounts.
4. Flash, install, and reboot into TWRP. You should now be able to restore the data backup without any issues.
AFH mirrors for images:
Build NMJ32F
NMJ32F patched boot image
NMJ32F factory image
Build NMJ20D
NMJ20D patched boot image
NMJ20D factory image
TWRP (alpha v4)
Thanks for getting the latest boot image up so quickly.
Thanks for the detailed guide, it worked great!
Any idea how to install xposed sdk 25? I tried the adb sideload function and the Magsik Module but both failed. Any ideas?
how to install the NMJ32F ota update when you are already rooted on NMJ20D?
Tried adb sideload but cannot install obviously because boot-loader is unlocked and is rooted.
prgopala said:
how to install the NMJ32F ota update when you are already rooted on NMJ20D?
Tried adb sideload but cannot install obviously because boot-loader is unlocked and is rooted.
Click to expand...
Click to collapse
You need to flash the system and boot images from Invisiblek's stock ROM dump. You'll then be unrooted and will be able to accept the update.
Factory reset no longer required if your bootloader is already unlocked? Does TWRP read encypted storage now? Or is that still a problem?
@bmg1001 , good looks, here are more free XDA points to trade in for that pool table, lol.
gk1984 said:
Factory reset no longer required if your bootloader is already unlocked? Does TWRP read encypted storage now? Or is that still a problem?
Click to expand...
Click to collapse
As far as I know, TWRP still doesn't have decryption fully working just yet, but installing Magisk works fine without any factory resets.
prozo said:
Thanks for the detailed guide, it worked great!
Any idea how to install xposed sdk 25? I tried the adb sideload function and the Magsik Module but both failed. Any ideas?
Click to expand...
Click to collapse
Xposed works fine for me. Make sure you installed the correct Xposed Installer/Manager apk linked in the thread for the Xposed Module. Also, it may take a reboot or two for Xposed to fully activate.
Did anyone manage to disable encryption? I tried everything and failed
bmg1001 said:
Xposed works fine for me. Make sure you installed the correct Xposed Installer/Manager apk linked in the thread for the Xposed Module. Also, it may take a reboot or two for Xposed to fully activate.
Click to expand...
Click to collapse
Maybe I'm not gathering the information correctly, using the Magisk Module itself doesn't work, sideloading the zip file via the adb fastboot TWRP.img doesn't work either, using the actual Xposed APK installer doesn't work either. I rebooted the phone about 4 times before removing it entirely.
Any chance you can walk me through how you got it installed without the TWRP recovery fully installed?
prozo said:
Maybe I'm not gathering the information correctly, using the Magisk Module itself doesn't work, sideloading the zip file via the adb fastboot TWRP.img doesn't work either, using the actual Xposed APK installer doesn't work either. I rebooted the phone about 4 times before removing it entirely.
Any chance you can walk me through how you got it installed without the TWRP recovery fully installed?
Click to expand...
Click to collapse
All I did was install the Xposed APK and then the Xposed Magisk Module. After two reboots, the apk said everything was working. This is the apk I used: https://drive.google.com/file/d/16-OHpswcngp1KLtkWCBDwwl8AvFafR5H/view?usp=drivesdk
bmg1001 said:
All I did was install the Xposed APK and then the Xposed Magisk Module. After two reboots, everything was working. This is the apk I used: https://drive.google.com/file/d/16-OHpswcngp1KLtkWCBDwwl8AvFafR5H/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks for replying so quickly I appreciate it, the file you linked keeps opening on my end and fails to install saying it's corrupt
prozo said:
Thanks for replying so quickly I appreciate it, the file you linked keeps opening on my end and fails to install saying it's corrupt
Click to expand...
Click to collapse
The apk should be the same one found here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
bmg1001 said:
All I did was install the Xposed APK and then the Xposed Magisk Module. After two reboots, the apk said everything was working. This is the apk I used: https://drive.google.com/file/d/16-OHpswcngp1KLtkWCBDwwl8AvFafR5H/view?usp=drivesdk
Click to expand...
Click to collapse
Alright I got it to work
So I didn't use the APK instead I downloaded the zip from the XDA thread that is specifically for Magisk Module and then added via the modules tab on the left side of the Magisk Module APK.
After I restarted I had the newly installed APK to download and install the proper version of Xposed 88.2 sdk25
Another restart and boom I got the active module notification in green.
Thanks man!
Thread for downloads can be found here:
https://www.google.com/amp/s/forum....ed/unofficial-systemless-xposed-t3388268/amp/
Thank you for this!
My PH-1 is arriving today. SooOoo excited!
spotmark said:
You need to flash the system and boot images from Invisiblek's stock ROM dump. You'll then be unrooted and will be able to accept the update.
Click to expand...
Click to collapse
Would using flashfire work to install the ota?
drocny87 said:
Would using flashfire work to install the ota?
Click to expand...
Click to collapse
Couldn't tell you. I just used TWRP to flash the system and boot, and then took the update, and then rerooted.
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are NOT risking voiding your warranty!
I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Hello!
Some people asked me how to root Xiaomi Pocophone F1 with magisk and to keep stock recovery on it, to recive OTA updates etc. so this is the complete guide
Sorry for all language misstakes, my english is not perfect, so please, if you have found anything, inform me via private message, so I can edit the post and correct it.
1. Unlock Bootloader Unlocking Bootloader Explanation and Troubleshooting for NEWBIES | thanks to @madsponge26
2. TWRP boot (not flashing, you will keep your stock recovery)
3. Pull stock boot.img from your phone (method II)
4. Boot.img patching (Patching stock boot.img with magisk manager app) (method II)
5. Patched magisk boot.img flashing (method II)
Tools and Information we need
USB Driver
Minimal ADB Fastboot
TWRP 3.2.3-x Unofficial with working DECRYPTION 12/10/2018
Magisk Manager App
How to Unlock Bootloader
Back up Files (Internal Storage)
1. Go to Settings > About phone
2. Find the MIUI Version and press 6-8 times
3. Go to Additional Settings > Developers Options
4. Press and check USB Debugging and OEM Unlocking
5. Go to Settings > Developers Options > Mi Unlock Status > Add Account & Device and log in with your MI account.
6. Go to MIUI Unlock website
7. Login to your MI account
8. You should be able to download Mi Unlock and unlock bootloader without filling any forms or applying for permissions (I was able to do that this way)
- if not, then apply and wait.
*Install Xiaomi USB Drivers from link above or by Mi Unlock app settings option.*
In MI Unlock app:
1. Shut down your phone manually, and hold Volume down key and Power button to enter Fastboot mode.
2. Connect your phone to PC using USB cable and click "Unlock".
***Mi account should verified.
Booting into TWRP, getting ADB SuperUser access, pulling stock boot.img
1. Open Minimal ADB Fastboot terminal AS ADMINISTRATOR!
2. Shut down your phone
NOW FOCUS
3. Connect your phone to your PC and hold Power and Volume Down buttons until Fastboot screen will be visible.
4. Follow the steps:
Put that command in your Minimal ADB Fastboot terminal:
Code:
fastboot devices
Your phone should be visible.
example: ,,7e00a8e3 fastboot"
Code:
fastboot boot <path to your TWRP .img recovery file>
Your phone should be booted into TWRP recovery.
If ask's for password: CLICK CANCEL
If ask's for keeping /system read only: swipe (allow modifications)
UPDATE:
NOW YOU CAN JUST FLASH MAGISK.ZIP AND REBOOT
There was no TWRP with working decryption before.
Method II:
Code:
adb devices
Your phone should be visible.
example: ,,7e00a8e3 recovery"
Code:
adb shell
Here we go! We got access to Super User shell via ADB ^^
and now the magic:
- In TWRP recovery, go to Advanced > File Manager
- Go to "/dev/block/platform/" folder (go into ,,soc" folder, if you have one there)
- Here you will see some files and folders, we need to open folders and search for the folder called "by-name" inside one of them. || For me it was /dev/block/platform/soc/1d84000.ufshc and ,,by-name" inside of it.
- At the end, we need name of the folder contains ,,by-name" inside for this string: /dev/block/platform/soc/FOLDER NAME/by-name
- Now go to your ADB Shell terminal and put that command:
soc = you should have this folder too, if not; ignore (please confirm that in comments)
FOLDER NAME = your folder with ,,by-name" inside
Code:
ls -al /dev/block/platform/[COLOR="DarkOrange"][B]soc[/B][/COLOR]/[COLOR="Red"][B]FOLDER NAME[/B][/COLOR]/by-name
Now you should see partitions of your phone.
You need to find your boot partition, for me it was:
Code:
lrwxrwxrwx 1 root root 16 Feb 15 1970 [B][COLOR="Red"]boot[/COLOR][/B] -> [B][COLOR="Red"]/dev/block/sde45[/COLOR][/B]
--
Pulling our stock boot.img!
Go to your ADB Shell terminal and put that commands:
Replace sde45 with your partition from step above*
Code:
dd if=/dev/block/[B][COLOR="Red"]sde45[/COLOR][/B] of=/sdcard/boot.img
Code:
exit
Code:
adb pull /sdcard/boot.img
Our stock boot.img should be downloaded into our Minimal ADB Fastboot directory!
Code:
adb reboot
Stock boot.img patching and flashing (For Method II only)
1. Save your stock boot.img into phone's internal storage/sdcard
2. Download latest Magisk Manager from MAGISK GITHUB REPO
3. Install Magisk Manager on your phone.
4. Open Magisk Manager, check Keep Force Encryption
5. Click Install > Install > Boot Image Patching > Select your stock boot.img and patch it.
6. Save your patched boot.img to your computer
7. Shut down your phone
8. Open Minimal ADB Fastboot terminal on your PC
9. Connect your phone to your PC and hold Power and Volume Down buttons until Fastboot screen will be visible.
4. Follow the steps:
Enter commands:
Code:
fastboot devices
Your phone should be visible.
example: ,,7e00a8e3 fastboot"
Code:
fastboot flash boot <path to your patched_boot.img>
Code:
fastboot reboot
5. Open Magisk Manager, your phone should be rooted.
6. Download Root Checker from Play Store and check if your device is rooted.
FOR OTA UPDATES:
- Uninstall magisk with Magisk Manager App (Restore Image option)
- Apply OTA update
then:
Method I:
- Boot into twrp (version with working decryption)
- Flash Magisk ZIP again
Method II:
- Pull boot.img and patch it again
- Flash new patched boot.img
If you have any questions or problems, type those in the comment below, I will try to help you
Stock Mi Recovery 3.0 for Pocophone F1: GOOGLE DRIVE
Before flashing OTA update, you need to uninstall magisk and install it again after update.
Thanks for a great tutorial, this is what I needed, just a few queries.
1. After ota will I retain root or again the whole process will have to be repeated.
2. In this process if I start with an unlocked bootloader with 8.10.9 beta rom any chance or need to wipe data or internal storage.
3. What if after flashing twrp, I just flash magisk and reboot without flashing force encryption disabler, stock recovery will automatically overwrite twrp, will I lose any data or root.
sanjay0501 said:
Thanks for a great tutorial, this is what I needed, just a few queries.
1. After ota will I retain root or again the whole process will have to be repeated.
2. In this process if I start with an unlocked bootloader with 8.10.9 beta rom any chance or need to wipe data or internal storage.
3. What if after flashing twrp, I just flash magisk and reboot without flashing force encryption disabler, stock recovery will automatically overwrite twrp, will I lose any data or root.
Click to expand...
Click to collapse
1. For now you need to uninstall magisk root before any OTA update, and install it again after it. I don't figured it out yet, how to update OTA and keep magisk.
2. Mi Unlock App will tell you if your internal storage needs to be wiped or not after connecting your phone in fastboot mode.
For me there was a red text that my internal storage will be wiped, for you it will be propably similar.
3. In this tutorial you are not flashing TWRP, you are just booting your phone into TWRP without flashing it to get acess to Super User via ADB and to pull stock boot.img to patch it later with magisk.
Target of this tutorial is to keep stock recovery, so it wont be overwrited because you will be already using it. It shouldn't affect magisk root, but
it would be an good idea to check ,,Keep Force Encryption" in Magisk Manager app before patching boot.img if you are not going to flash Disable Force Encryption zip etc.
exepowered said:
1. It depends propably on OTA update type. Can't answer for sure now, but OTA is comming on Friday with new version of MIUI 10 Beta so I will check that.
2. Mi Unlock App will tell you if your internal storage needs to be wiped or not after connecting your phone in fastboot mode.
For me there was a red text that my internal storage will be wiped, for you it will be propably similar.
3. In this tutorial you are not flashing TWRP, you are just booting your phone into TWRP without flashing it to get acess to Super User via ADB and to pull stock boot.img to patch it later with magisk.
Target of this tutorial is to keep stock recovery, so it wont be overwrited because you will be already using it. It shouldn't affect magisk root, but
it would be an good idea to check ,,Keep Force Encryption" in Magisk Manager app before patching boot.img if you are not going to flash Disable Force Encryption zip etc.
Click to expand...
Click to collapse
Thanks for ur help.
Hi, thanks for the tutorial but I have a problem when unlocking my bootloader, when I am on the Mi unlock application and I connect my phone in fastboot mode mi unlock do not recognize my phone and therefore impossible to click unlock.
My computer recognizes the phone well but not the application do you have solutions?
Open it as administrator
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
uremytoy said:
Open it as administrator
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
Click to expand...
Click to collapse
I opened it in administrator mode, it does not work
Inside unlock tool there are drivers. Try to install them. I've had the same and it worked for me
Wysłane z mojego POCOPHONE F1 przy użyciu Tapatalka
hey dudes, can someone please upload the stock recovery for me?
everytime the phone wants to install an ota it just boots into twrp and i have to manually reboot it from there.
so if i just flash the stock poco recovery the phone would updtate the ota normally and root still would be there?
Before flashing OTA update, you need to uninstall magisk and install it after update.
WasIstDenn said:
hey dudes, can someone please upload the stock recovery for me?
everytime the phone wants to install an ota it just boots into twrp and i have to manually reboot it from there.
so if i just flash the stock poco recovery the phone would updtate the ota normally and root still would be there?
Click to expand...
Click to collapse
Stock Mi Recovery 3.0 for Pocophone F1: GOOGLE DRIVE
Before OTA update, uninstall magisk via Magisk Manager App, then after update install it again using my guide, otherwise you will get bootloop.
I don't figured it out yet, how to keep magisk live when updating.
exepowered said:
Stock Mi Recovery 3.0 for Pocophone F1: GOOGLE DRIVE
Before OTA update, uninstall magisk via Magisk Manager App, then after update install it again using my guide, otherwise you will get bootloop.
I don't figured it out yet, how to keep magisk live when updating.
Click to expand...
Click to collapse
So after uninstalling magisk and applying OTA, we need to do whole process again? pull out boot - patch it and flash it?
at this point it makes more trouble than just installing twrp.
For now there is twrp with decryption working so you can flash magisk ZIP, with booted twrp (not flashed).
I used the same boot I had before OTA and there was no problems too.
exepowered said:
For now there is twrp with decryption working so you can flash magisk ZIP, with booted twrp (not flashed).
I used the same boot I had before OTA and there was no problems too.
Click to expand...
Click to collapse
You extracted the boot image, patched it using magisk, and flashed it using fastboot.
Instead, can't we just install Magisk.zip using twrp? This way it saves us from running all those commands.
For OTA, we can uninstall magisk and flash original stock recovery, then apply ota, then flash twrp and magisk.zip.
Correct me if I am wrong.
Thanks
anirudh281998 said:
You extracted the boot image, patched it using magisk, and flashed it using fastboot.
Instead, can't we just install Magisk.zip using twrp? This way it saves us from running all those commands.
For OTA, we can uninstall magisk and flash original stock recovery, then apply ota, then flash twrp and magisk.zip.
Correct me if I am wrong.
Thanks
Click to expand...
Click to collapse
I know what I have done.
But if the same patched boot.img is not working after uninstalling and OTA update, you can skip other steps and just boot into twrp [version with working decryption] (everything is in my post) and flash ZIP. ZIP does the same thing, it patches boot.img so it's just faster for now. When I was doing this tutorial, there was no twrp with working decryption for poco...
You can try to flash same patched boot.img you had before OTA. Last time it worked for me.
You don't need to flash twrp too...
Just uninstall magisk
Do OTA update
BOOT into twrp (version with working decryption)
Flash magisk.zip
reboot
exepowered said:
I know what I have done.
But if the same patched boot.img is not working after uninstalling and OTA update, you can skip other steps and just boot into twrp [version with working decryption] (everything is in my post) and flash ZIP. ZIP does the same thing, it patches boot.img so it's just faster for now. When I was doing this tutorial, there was no twrp with working decryption for poco...
You can try to flash same patched boot.img you had before OTA. Last time it worked for me.
You don't need to flash twrp too...
Just uninstall magisk
Do OTA update
BOOT into twrp (version with working decryption)
Flash magisk.zip
reboot
Click to expand...
Click to collapse
I flash the decryption TWRP and install magisk but the phone bootloops back to recovery no matter what I try. I have to uninstall magisk using the official installer, only then the phone lets me boot into system but obviously I lose root. Any guesses what I should do to get root with formatting storage ?
Hey dude! Is there any way to unlock my poco f1 bootloader without wiping the data?
SusanooX said:
Hey dude! Is there any way to unlock my poco f1 bootloader without wiping the data?
Click to expand...
Click to collapse
Nope
Is it equal, on wich (original) ROM/Software-Verisom i´am for unlocking, flashing twrp and rooting ?
Or is it the best, to NOT update the original Rom OTA and after that unlocking, flashing twrp and rooting ?
Hi all,
I've tried different methods to apply the November OTA to my Pixel 3, but so far none has worked seamlessly. Here's what I've tried so far:
- TWRP install the full OTA from Google (fails with a timestamp error)
- sideloading the full OTA from Google (same timestamp error)
- using topjohnwu's suggestion from his Magisk GitHub, which in short temporarily unroots the phone to allow the regular OTA process to take place, then before rebooting use Magisk Manager to patch the boot image of the spare partition (in this scenario, the phone won't even boot fully, it does boot but eventually restarts before hitting the lockscreen).
Is there any correct way to apply OTAs straight from the phone, without using a computer? If not, what would be the best way to update the Pixel 3?
Why not just flash-all (minus the -w) the system image?
sliding_billy said:
Why not just flash-all (minus the -w) the system image?
Click to expand...
Click to collapse
Because that requires a computer. I'd rather have a solution that would allow me to update on the fly; preferably, flashing an OTA through TWRP, which would then allow me to also reflash TWRP itself and Magisk. But, then again, this would simply be my optimal scenario - if it can't be done, I'll stick to flash-all.
GryphonBR said:
Because that requires a computer. I'd rather have a solution that would allow me to update on the fly; preferably, flashing an OTA through TWRP, which would then allow me to also reflash TWRP itself and Magisk. But, then again, this would simply be my optimal scenario - if it can't be done, I'll stick to flash-all.
Click to expand...
Click to collapse
Understood. I have just got so used to installing with the flash-all that is second nature. OTA through TWRP wasn't even working for a long time on the OG Pixel series, and putting the ~700 MB OTA file on the phone seemed like a waste since I only had a 32GB. Either way, permanent TWRP and Magisk are still installed directly from the phone and the TWRP .img fastboot boot needs a computer anyways so there is really no way to avoid the computer completely from end to end.
sliding_billy said:
Understood. I have just got so used to installing with the flash-all that is second nature. OTA through TWRP wasn't even working for a long time on the OG Pixel series, and putting the ~700 MB OTA file on the phone seemed like a waste since I only had a 32GB. Either way, permanent TWRP and Magisk are still installed directly from the phone and the TWRP .img fastboot boot needs a computer anyways so there is really no way to avoid the computer completely from end to end.
Click to expand...
Click to collapse
Well, if I could apply a full OTA directly from an already installed TWRP, then it'd be as simple as reinstalling TWRP and Magisk after the OTA. I was used to doing this on AOSP-based ROMs like Ressurection Remix or CyanogenMod/LineageOS.
GryphonBR said:
Well, if I could apply a full OTA directly from an already installed TWRP, then it'd be as simple as reinstalling TWRP and Magisk after the OTA. I was used to doing this on AOSP-based ROMs like Ressurection Remix or CyanogenMod/LineageOS.
Click to expand...
Click to collapse
No way to do it on a Pixel device (that I am aware of) since TWRP needs ran from outside of the OS. I seem to remember this coming up a bit when the OG Pixel first launched, and then it was just accepted to use fastboot boot.
sliding_billy said:
No way to do it on a Pixel device (that I am aware of) since TWRP needs ran from outside of the OS. I seem to remember this coming up a bit when the OG Pixel first launched, and then it was just accepted to use fastboot boot.
Click to expand...
Click to collapse
Yeah, there's something funky about how TWRP works with the A/B setup, because of the embedded recovery into boot and such, I assume. In any case, at this point it seems like I actually can get it updated using fastboot, so that'll have to do for the time being.
Thanks for bouncing off ideas with me!
GryphonBR said:
Yeah, there's something funky about how TWRP works with the A/B setup, because of the embedded recovery into boot and such, I assume. In any case, at this point it seems like I actually can get it updated using fastboot, so that'll have to do for the time being.
Thanks for bouncing off ideas with me!
Click to expand...
Click to collapse
Any time. Good luck!
GryphonBR said:
Because that requires a computer. I'd rather have a solution that would allow me to update on the fly; preferably, flashing an OTA through TWRP, which would then allow me to also reflash TWRP itself and Magisk. But, then again, this would simply be my optimal scenario - if it can't be done, I'll stick to flash-all.
Click to expand...
Click to collapse
Last I heard flashing OTA in twrp is broken, but even if it is fixed as soon as you flash the OTA you would lose TWRP. So you still need a computer to boot to TWRP to install it and/or root.
The key point is you have to boot to TWRP before you can flash either it or Magisk.
TonikJDK said:
Last I heard flashing OTA in twrp is broken, but even if it is fixed as soon as you flash the OTA you would lose TWRP. So you still need a computer to boot to TWRP to install it and/or root.
The key point is you have to boot to TWRP before you can flash either it or Magisk.
Click to expand...
Click to collapse
But that's what I was trying to do in the first place: booted from TWRP, apply OTA than flash TWRP and Magisk.
Which doesn't boot up, unfortunately. Not sure why.
GryphonBR said:
But that's what I was trying to do in the first place: booted from TWRP, apply OTA than flash TWRP and Magisk.
Which doesn't boot up, unfortunately. Not sure why.
Click to expand...
Click to collapse
Right, it is broke that way right now. It's hard to do because recovery where TWRP sits and boot are the same partition now. Touch one you touch both. So when you flashed the OTA you wiped TWRP out of recovery.
TonikJDK said:
Right, it is broke that way right now. It's hard to do because recovery where TWRP sits and boot are the same partition now. Touch one you touch both. So when you flashed the OTA you wiped TWRP out of recovery.
Click to expand...
Click to collapse
That's true, but when I'm using TWRP that's the runtime instance, not the installed one. So even if it gets overwritten by the OTA installation, it wouldn't matter since it would still be active at that moment.
I went nuts trying to figure out how to sideload the Nov OTA update through TWRP (was always easy with my OG Pixel) and then figured it doesnt work lol. Just did like was already suggested and took out the -w from the OTA and it went smooth after I updated my platform tools. This is the way I will do it from now on even if TWRP gets fixed which that looks unlikely.
Anyone do it without using TWRP?
Dbzruben said:
Anyone do it without using TWRP?
Click to expand...
Click to collapse
Yes, download the factory image and edit the flash-all batch file to remove the -w. Alternately, you can flash the stock boot image of your current os version and use the stock recovery to sideload the ota. Either way twrp will be replaced with the stock recovery.
Sent from my [device_name] using XDA-Developers Legacy app
Dbzruben said:
Anyone do it without using TWRP?
Click to expand...
Click to collapse
Method that worked for me (Fi Pixel3 (blueline), on Nov update, previously rooted via Magisk 17.3 Patch Boot Image File method) has been posted elsewhere & doesn't require TWRP installation. This assumes your device is already OEM Unlocked, has Developer Options/USB Debugging enabled/setup and you have the latest ADB/Drivers installed on your PC:
Download Dec Factory image (blueline-pq1a.181205.006)
Download TWRP 3.2.3-0 bootable image (twrp-3.2.3-0-blueline.img)
Download Magisk 17.3 zip
Download Magisk Manager 6.0.1 APK
Download Magisk Uninstaller (Canary)
Move TWRP bootable image file to ADB folder on PC (Win7 for me)
Unzip Dec image contents into ADB folder on PC
Find the Dec Boot.img file from extracted Dec image contents and copy it to Device Storage (Download folder)
Move Magisk Manager APK & Magisk Uninstaller zip to Device Storage (Download folder)
Modify the flash-all.bat file from the extracted Dec image contents location in Notepad (remove the -w) and save/overwrite the file back to the same directory & close Notepad
Open up command window from ADB folder on PC
adb reboot bootloader
fastboot boot twrp-3.2.3-0-blueline.img
"Install" the Magisk Uninstaller zip (via TWRP) wait for that to finish then reboot to bootloader.
(Re)Open a command window from your PC's ADB folder if you closed it.
flash-all (with the -w previously removed in Notepad). Wait for it to finish.
fastboot reboot (if it doesn't boot back to System once finished)
(Now in Android after 1st system boot) Check that Dec update has taken (Settings->System->About Phone->Build Number). No root.
To continue rooting Dec Image:
Install Magisk Manager APK (from Settings->Storage->Files->Download folder)
Open MM (ignore/dont install anything via MM if prompted). No root (as of yet).
In MM: Settings->Update Channel-> Change to "Beta"
Swipe down in MM to "Update" MM and "Install" v17.3 (17302.zip hotfix) via Patch Boot Image File method (using Dec Boot.img previously extracted and put into Device Storage (Download folder)).
Output Patched_Boot.img should now be located in Device Storage (Download folder).
Copy Patched_Boot.img file from Device Storage to ADB folder on PC
Open up a command window from ADB folder on PC again:
adb reboot bootloader
fastboot flash boot_a Patched_Boot.img
fastboot flash boot_b Patched_Boot.img
fastboot reboot
(assuming everything took) Open up MM, confirm Magisk 17.3 is installed & you have root
Re-Install all relevant MM modules (i did not have Active Edge module previously installed but heard there were issues with this module & root)
There's way more steps in that than needed and really doesn't address how to apply an ota to a rooted phone.
Line 13 is the only thing that would apply.
Sent from my [device_name] using XDA-Developers Legacy app
I cont root my pixel with Dezember Update. It stock on bootloop after i flashed the patched Magisk images.
Serial Kazama said:
I cont root my pixel with Dezember Update. It stock on bootloop after i flashed the patched Magisk images.
Click to expand...
Click to collapse
Have you tried to root using twrp and the magisk zip?
Sent from my [device_name] using XDA-Developers Legacy app
Find the solution, i forgot to use the Magist Uninstaller Zip before i root the new OTA. My fault. Thx anyway!
Hello everyone hope you are all keeping well.
Here is a little guide on how to Unlock/Lock the Bootloader and Root/Unroot our Nord2T.
I cannot be responsible if you brick your device. Your phone, your choices, your responsibility!
Unlock The Bootloader;
If you haven't done it already...beware that this will erase all of your user data. To do so, you must:
Enable developer options
Enable the "OEM unlocking" option
Enable USB debugging
Have both adb and fastboot, from SDK Platform Tools available on your PC
Connect your phone to your PC using the USB cable and run the following commands:
Code:
adb devices
(just to make sure that your phone is, in fact, recognized by your PC and that you're able to run adb commands)
Code:
adb reboot bootloader
(so your phone will reboot into fastboot mode)
Code:
fastboot flashing unlock
(device should now unlock)
Code:
fastboot reboot
(device reboots with an unlocked bootloader and data partition wiped so set up the device from scratch again)
Rooting Guide;
Unlocking the Bootloader is necessary before continuing
1 - Download Nord2T stock boot.img that you may find later on this post, that matches your current build.
Copy the boot.img to your devices internal memory
Leave a copy of it on your PC (on the same folder you have adb and fastboot...you never know if you will need to use it again in the future...to restore the stock boot.img, aka revert to stock...)
Spoiler: Global Build boot.img's
Stock boot CPH2399_11_A.07 (did not extract it and can't find the firmware file to be able to download and extract, if someone could please upload a link to it on this thread I would sincerely appreciate it)
Stock Boot CPH2399_11_A.09
Stock Boot CPH2399_11_A.11
Stock Boot CPH2399_11_A.14
Stock Boot CPH2399_11_A.15
Stock Boot CPH2399_11_A.16
Stock Boot CPH2399_11_A.17
Stock Boot CPH2399_11_A.19
Stock Boot CPH2399_11_C.24
Stock Boot CPH2399_11_C.26
Stock Boot CPH2399_11_C.27
Spoiler: IND Build boot.img's
Stock Boot CPH2401_11_A.11
Stock Boot CPH2401_11_A.13
Stock Boot CPH2401_11_A.14
Stock Boot CPH2401_11_A.15
Stock Boot CPH2401_11_A.16
Stock Boot CPH2401_11_A.17
Stock Boot CPH2401_11_A.18
Stock Boot CPH2401_11_A.19 (I didn't capture the download for this, if anyone has it please send me a link to the official OTA)
Stock Boot CPH2401_11_C.23
Stock Boot CPH2401_11_C.24
Stock Boot CPH2401_11_C.26
Stock Boot CPH2401_11_C.27
2 - Download latest Magisk Manager from HERE and install it on your phone
3 - Open Magisk Manager App and press:
Install
Select and Patch a File
Browse to the path where you saved stock boot.img and select it
Magisk Manager will now patch the boot image and store it in [Internal Storage]/Download/magisk_patched.img
4 - Copy the patched boot image from your device to your PC (Store it on the same folder where you have adb and fastboot)
5 - Flash the patched boot image to your phone by running these commands (remember, you must have patched boot image on the same folder you have adb and fastboot and, of course, your device must be connected to your PC...)
Code:
adb reboot bootloader
Code:
fastboot flash boot magisk_patched.img
Code:
fastboot reboot
6 - After the phone boots up, hopefully with a normal boot (almost feels like nothing happened....), install/open Magisk Manager App again and watch Magisk doing it's magic!
7 - Enjoy!
All credits goes to topjohnwu and his incredible work with Magisk.
System Updates;
For system updates. Just apply the OTA update as normal.
Once updated you will have no root and you must follow steps above again with the new boot.img that corresponds to the firmware version you are on.
Unroot;
To unroot simply flash the stock boot.img.
Relock Bootloader;
If you have TWRP installed flash the stock boot.img (same as your firmware version from earlier in this post)
This is so as you can access fastboot properly.
1 - To relock Bootloader first download Oxygen Updater app from the Playstore.
2 - Download the firmware which corresponds to the firmware which you have currently installed.
3 - Move/copy this firmware.zip to your PC and extract it. (inside you will see a folder and a couple files. The only file we need is payload.bin)
4 - Download/install Fastboot Enhance on your PC
5 - Reboot phone to bootloader mode so it gets detected by Fastboot Enhance, from there boot to fatsbootd.
6 - Flash payload.bin in Fastboot Enhance
7 - Wipe data in fastbootd from your Nord 2T, reboot and finish phone setup.
8 - Enable developer options, enable USB debugging from developer options.
9 - Reboot to bootloader and run the command;
Code:
fastboot flashing lock
The device will be now successfully locked.
Hope this helps out
Thank you so much
Thanks so much. Going to try this weekend with my daughter phone.
Thanks a lot!
There is a new update available for Nord 2T:
CPH2399_11_A.11
Do you have the stock boot.img for this version by any chance?
jolaviska said:
Thanks a lot!
There is a new update available for Nord 2T:
CPH2399_11_A.11
Do you have the stock boot.img for this version by any chance?
Click to expand...
Click to collapse
No I still haven't received the ota. Did you get updated to this version already?
I received the update but refusing to apply it
jolaviska said:
I received the update but refusing to apply it
Click to expand...
Click to collapse
It will show up again.
Don't worry.
Rooted my Nord 2T successfully. Thanks once again
Download Nord2T stock boot.img
Click to expand...
Click to collapse
I was wondering... How can I extract the boot.img by myself without relying upon anyone? With the oxygen updater app I've the full firmware (~4 GB), would that be useful to extract the boot.img?
luke! said:
I was wondering... How can I extract the boot.img by myself without relying upon anyone? With the oxygen updater app I've the full firmware (~4 GB), would that be useful to extract the boot.img?
Click to expand...
Click to collapse
By using THIS software. I will always update this thread with the latest boot.img files in the future but this is the software I used
Thank you.
And what is the procedure to OTA update, once we have magisk_patched_boot.img installed.
OTA won't install, so need to revert somehow install new update and root again?
garylawwd this device is prone to bricking if you patch the inactive slot after an OTA within the Magisk app as I experienced first hand. I have never had such issues with my Redmi K40 Gaming despite their similarity with the MediaTek processor. After an OTA I would simply patch the inactive slot, reboot and enjoy permanent root.. topjohnwu made rooting simple for us...
Stock Global boot CPH2399_11_A.11 added to OP. Sorry for the delay, only received the update today
nielsync said:
garylawwd this device is prone to bricking if you patch the inactive slot after an OTA within the Magisk app as I experienced first hand. I have never had such issues with my Redmi K40 Gaming despite their similarity with the MediaTek processor. After an OTA I would simply patch the inactive slot, reboot and enjoy permanent root.. topjohnwu made rooting simple for us...
Click to expand...
Click to collapse
Ya I didnt do it this way at all because my device updated while i was asleep and i was unrooted, so I had to patch the new boot using the method in the OP.
I would definitely advise restoring the stock boot.img before proceeding with an update, then install the update normally and just patch the new image with magisk and then flash.
For a while the 'install to inactive slot' option only works on certain devices, the Nord 2T obviously is'nt one of those devices.
I'm sure the magisk documentation recommends restoring stock images before an update.
Thanks for the Stock Boot CPH2399_11_A.11, could you please also link the related img patched?
On my first Nord I have always updated with the patched boot img on it without problem, but I was on old Oxigen OS 11, not the 12 Oxigen (color) os...
cioce said:
Thanks for the Stock Boot CPH2399_11_A.11, could you please also link the related img patched?
On my first Nord I have always updated with the patched boot img on it without problem, but I was on old Oxigen OS 11, not the 12 Oxigen (color) os...
Click to expand...
Click to collapse
I didn't want to share any of the magisk images because there is a new version of magisk every other week and people may like to be on the beta branch or canary branch of magisk or whatever.
It's very easy to patch the image though. Just download magisk.apk and use it to patch the boot.img's I've provided above. Then move the patched.img to your pc and flash.
But anyways here is the magisk patched.img for CPH2399_11_A.11 using magisk 25.2 stable
Stock Boot for Indian variant CPH2401_11_A.13 added to OP
can u post the latest update boot.img for indian unit CPH2401_11_A.14
Stock boot for Indian CPH2401_11_A.14 added to OP
Stock boot for Global CPH2399_11_A.14 added to OP