Database Info

Flashing more recent stock rom from sammobile

Hi
Apologies for what is quite a basic question for I'm just trying to get things straight in my head before proceeding.
I have a UK retail S7 G930F, current running stock
Build G930FXXU1DQC4
Baseband G930FXXU1DQC2
Despite the fact this build only has Android security patch level February 2017, and the latest build is from 2018, my device and Smart Switch insist I am up to date, I want to actually make this the case while remaining on stock firmware.
I have used Odin to flash Galaxy phones before but not since I had a Note 2 and Note 3 so I'm a little rusty.
I have Odin 3.13.1 and the zip download from sammobile for build G930FXXS2DRAA for the same CSC region I'm currently on which is XEU.
All the guides for Odin flashing say to only use the AP file and option in Odin. However as my BL, CP and CSC will all be older as well, and I'm simply going from stock to stock can I (or should I) also flash these parts as well?
Thanks.

I need more information. 6 mm and 7 nougat use the same BL and require no upgrade where if you were on lollipop somehow you would need the bl. Please DO NOT run off and start flashing things like BL without help from here first. I have bricked a samsung device so bad I had to replace the motherboard, so I learned the hard way.

Both current firmware and the one I intend to flash are Android 7, the new one is just a much more recent build with a more up to date security patch level.
My current firmware, as shipped (or possibly updated OTA a long time ago)
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/XEU/download/G930FXXU1DQC4/127501/
My intended firmware that I plan to flash
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/XEU/download/G930FXXS2DRAA/205600/
Despite the fact that sammobile says the newer one is available in Smart Switch, it doesn't show any updates when I connect my device to my PC with Smart Switch.

y2kgecko said:
Both current firmware and the one I intend to flash are Android 7, the new one is just a much more recent build with a more up to date security patch level.
My current firmware, as shipped (or possibly updated OTA a long time ago)
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/XEU/download/G930FXXU1DQC4/127501/
My intended firmware that I plan to flash
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/XEU/download/G930FXXS2DRAA/205600/
Despite the fact that sammobile says the newer one is available in Smart Switch, it doesn't show any updates when I connect my device to my PC with Smart Switch.
Click to expand...
Click to collapse
I get that a lot. I upgraded my s7 to latest n release today and it worked ok.

So, do I just flash AP or everything?

y2kgecko said:
So, do I just flash AP or everything?
Click to expand...
Click to collapse
You need to flash all 4 files: BL / AP / CP / CSC
I do recommend that you flash CSC* and not HOME_CSC*. That way you will reset the phone to factory defaults and it will be ready for future OTA updates.
Backup your files first that you think are important and then start from scratch to configure the phone, install your apps, update the ones on the phone.

US Galaxy S8+ OTA software update not working / alternative way. SOLVED

What I want to do: I was trying to OTA update my phone software to the latest, but it seems I am behind on many updates. On the AT&T website, I saw that I need the previous updates installed first, in order to get the latest ones. I have to go in order.
Problem: Everytime I try to do a software update from the settings, it says “Current software is up to date.” It’s been saying that for over a year now. I can’t even get the updates from last year.
So is there a way I can flash one of the stock firmware updates from last year on to my phone with Odin and see if it will fix the ‘over the air’ updates? Or can I just skip to the most recent firmware and flash that one.
By the way, I have never done anything like this to my phone before, so I am a bit nervous, but I want to get this problem fixed so I would love if someone helped me out. I did see some articles online about flashing stock firmwares, that’s how I learned about Odin.
If this is doable, can someone please link me to a thorough tutorial on this process? If it isn’t, can you guys recommend another way of getting to the latest 8.0 stock firmware?
My phone right now:
Galaxy S8 plus (AT&T)
Model#: SM-G955U
Android version: 7.0
Baseband version: G955USQS1AQF7
Android security patch level: June 1, 2017
Kernel version: 4.4.16-11449429

Zendrop said:
What I want to do: I was trying to OTA update my phone software to the latest, but it seems I am behind on many updates. On the AT&T website, I saw that I need the previous updates installed first, in order to get the latest ones. I have to go in order.
Problem: Everytime I try to do a software update from the settings, it says “Current software is up to date.” It’s been saying that for over a year now. I can’t even get the updates from last year.
So is there a way I can flash one of the stock firmware updates from last year on to my phone with Odin and see if it will fix the ‘over the air’ updates? Or can I just skip to the most recent firmware and flash that one.
By the way, I have never done anything like this to my phone before, so I am a bit nervous, but I want to get this problem fixed so I would love if someone helped me out. I did see some articles online about flashing stock firmwares, that’s how I learned about Odin.
If this is doable, can someone please link me to a thorough tutorial on this process? If it isn’t, can you guys recommend another way of getting to the latest 8.0 stock firmware?
My phone right now:
Galaxy S8 plus (AT&T)
Model#: SM-G955U
Android version: 7.0
Baseband version: G955USQS1AQF7
Android security patch level: June 1, 2017
Kernel version: 4.4.16-11449429
Click to expand...
Click to collapse
If you are using the AT&T S8+ outside of the USA, you will not get any OTA updates due to AT&T update policy. What you want to do is flash the Unlocked firmware and you will be good. Search for carrier switching thread and follow it.

aromerblz said:
If you are using the AT&T S8+ outside of the USA, you will not get any OTA updates due to AT&T update policy. What you want to do is flash the Unlocked firmware and you will be good. Search for carrier switching thread and follow it.
Click to expand...
Click to collapse
Thanks for responding!
I managed to flash an older firmware from 4 months ago and I was able to OTA update to the recent one. https://forum.xda-developers.com/at...lternative-t3844887/post77673505#post77673505

Software update for s8+
Please where can I get latest software update for Samsung galaxy s8+ model number SM-G955U

[Resolved] #Solved# Any Possible Solution to Downgrade Back to Nougat?

Hello all
Been a member here for some time now and have a perplexing issue.
I upgraded a Samsung Device SM T395 to OS Pie 9 and decided I didn't like it. (There are no other posts with help on this matter)
I kept the STOCK roms Nougat 7.1 and Oreo 8 and want to put Nougat 7.1 back on my device , but is proving difficult using ODIN 13.3.1 or any other version of Odin. The result is FAIL, that's using a combination of AP, CSC, CP and BL.
I managed to get Oreo 8 back on it, but want Nougat 7.1 original installed instead.
Can anyone tell me can ADB Fastboot be used to Flash a Stock Rom back on a Samsung Device or is Odin the only method?
I know there are other similar programs like QFIL and Qualcomm that I have used for the Mi Max brand devices.
The device was rooted with Nougat 7.1 originally and I have USB debug set and FRP / OEM lock off also. So there's no problem there.
The last resort (stupidly expensive idea :crying is for me to buy another exact device that has Nougat 7 installed when boxed up!
I don't see how upgrading to Pie 9 and then wanting to go back to the original factory installed rom is a big problem, can anyone explain?
Would a CUSTOM Nougat 7.1 rom work if installed via TWRP ?
I have also come across this COMBINATION Software https://samsungcombinationfile.com/samsung-sm-t395 that is supposed to allow the downgrading of Android software, but hasn't worked as I had been lead to believe.
https://combinationfirmware.com/combination-samsung-galaxy-tab-active/
Thanks for reading :good:

tsam19 said:
Hello all
Been a member here for some time now and have a perplexing issue.
I upgraded a Samsung Device SM T395 to OS Pie 9 and decided I didn't like it. (There are no other posts with help on this matter)
I kept the STOCK roms Nougat 7.1 and Oreo 8 and want to put Nougat 7.1 back on my device , but is proving difficult using ODIN 13.3.1 or any other version of Odin. The result is FAIL, that's using a combination of AP, CSC, CP and BL.
I managed to get Oreo 8 back on it, but want Nougat 7.1 original installed instead.
Can anyone tell me can ADB Fastboot be used to Flash a Stock Rom back on a Samsung Device or is Odin the only method?
I know there are other similar programs like QFIL and Qualcomm that I have used for the Mi Max brand devices.
The device was rooted with Nougat 7.1 originally and I have USB debug set and FRP / OEM lock off also. So there's no problem there.
The last resort (stupidly expensive idea :crying is for me to buy another exact device that has Nougat 7 installed when boxed up!
I don't see how upgrading to Pie 9 and then wanting to go back to the original factory installed rom is a big problem, can anyone explain?
Would a CUSTOM Nougat 7.1 rom work if installed via TWRP ?
I have also come across this COMBINATION Softwarehttps://samsungcombinationfile.com/samsung-sm-t395 that is supposed to allow the downgrading of Android software, but hasn't worked as I had been lead to believe.
https://combinationfirmware.com/combination-samsung-galaxy-tab-active/
Thanks for reading :good:
Click to expand...
Click to collapse
Samsung firmwares can not be downgraded. This is due to your bootloader version number. The bootloader version is the 5th number from the right of the firmware being downloaded. You can also check in setting - about phone - software info - baseband version ( 5th number from right). You can also tell bootloader number in download (Odin) mode with a line saying AP SWREV B:? : K? : S?. The B is your bootloader number.
Combination firmware works on the same principle in regards to bootloader numbers.
You can only flash the same or higher bootloaders version numbers.
Custom roms will work as long as the bootloader version number is the same ( or higher ) than what is on you phone.

spawnlives said:
Samsung firmwares can not be downgraded. This is due to your bootloader version number. The bootloader version is the 5th number from the right of the firmware being downloaded. You can also check in setting - about phone - software info - baseband version ( 5th number from right). You can also tell bootloader number in download (Odin) mode with a line saying AP SWREV B:? : K? : S?. The B is your bootloader number.
Combination firmware works on the same principle in regards to bootloader numbers.
You can only flash the same or higher bootloaders version numbers.
Custom roms will work as long as the bootloader version number is the same ( or higher ) than what is on you phone.
Click to expand...
Click to collapse
RE: spawnlives. Many thanks for clearing that up, I now understand. Like many other people I have been trying to mix and match BL files from different OS variants to try and trick the device into accepting the main Nougat AP file via Odin, but nothing works.
These NEW combination files suggest that it is possible to downgrade the BOOTLOADER files on certain devices. However I downloaded all that was available for my device and tried the lot and found the only ROM that would flash correctly and properly was the latest one with the Binary 4 Bootloader. The rest would not register in Odin due to MD5 binary error messages.
In download mode my device AP SWREV B:4 K:2 S:2. ( So I have binary 4 which was released in January 2019, I believe). and this must have been updated when I updated to OS 9 Pie , using all the AP, CSC , BL and CP files.
So as you say, the answer is either , look for a Nougat 7.1 rom with a BL file that has a BINARY 4 code. Or buy another device that has the original Nougat 7.1 installed, which is silly really. :laugh:
Thanks :good:

tsam19 said:
spawnlives said:
RE: spawnlives. Many thanks for clearing that up, I now understand. Like many other people I have been trying to mix and match BL files from different OS variants to try and trick the device into accepting the main Nougat AP file via Odin, but nothing works.
These NEW combination files suggest that it is possible to downgrade the BOOTLOADER files on certain devices. However I downloaded all that was available for my device and tried the lot and found the only ROM that would flash correctly and properly was the latest one with the Binary 4 Bootloader. The rest would not register in Odin due to MD5 binary error messages.
In download mode my device AP SWREV B:4 K:2 S:2. ( So I have binary 4 which was released in January 2019, I believe). and this must have been updated when I updated to OS 9 Pie , using all the AP, CSC , BL and CP files.
So as you say, the answer is either , look for a Nougat 7.1 rom with a BL file that has a BINARY 4 code. Or buy another device that has the original Nougat 7.1 installed, which is silly really. :laugh:
Thanks :good:[/
The best you can do is roll back to Oreo. A new phone running nougat would be the best choice. I don't use custom roms but they all seem to keep up to the latest version. I have not seen one that ( latest version ) that is nougat favoured.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

spawnlives said:
tsam19 said:
spawnlives said:
RE: spawnlives. Many thanks for clearing that up, I now understand. Like many other people I have been trying to mix and match BL files from different OS variants to try and trick the device into accepting the main Nougat AP file via Odin, but nothing works.
These NEW combination files suggest that it is possible to downgrade the BOOTLOADER files on certain devices. However I downloaded all that was available for my device and tried the lot and found the only ROM that would flash correctly and properly was the latest one with the Binary 4 Bootloader. The rest would not register in Odin due to MD5 binary error messages.
In download mode my device AP SWREV B:4 K:2 S:2. ( So I have binary 4 which was released in January 2019, I believe). and this must have been updated when I updated to OS 9 Pie , using all the AP, CSC , BL and CP files.
So as you say, the answer is either , look for a Nougat 7.1 rom with a BL file that has a BINARY 4 code. Or buy another device that has the original Nougat 7.1 installed, which is silly really. :laugh:
Thanks :good:[/
The best you can do is roll back to Oreo. A new phone running nougat would be the best choice. I don't use custom roms but they all seem to keep up to the latest version. I have not seen one that ( latest version ) that is nougat favoured.
Click to expand...
Click to collapse
RE:spawnlives
Yes having researched the total list of softwares for the SM-T395 device, it seems the BL was updated to 4 on the 2nd roll out of Oreo 8.1. And having checked ALL stock Nougat variants, there was never any release of 7.1 with a bootloader binary 4!
I presume the BL Binary version is the 5 character from the right on the picture. (underlined red) :good:
It would make sense for Samsung to give the end user a choice what software they want, by keeping the BL version the same or giving a choice of BL selections to allow upgrade or downgrade.
Anyway, I rolled back to Oreo 8.1 with the binary 4 BL. And unfortunately there aren't many CUSTOM roms , nor a working TWRP for the Samsung Galaxy Active Tab2.
Thanks again :good:
Click to expand...
Click to collapse
Click to expand...
Click to collapse

tsam19 said:
spawnlives said:
tsam19 said:
RE:spawnlives
Yes having researched the total list of softwares for the SM-T395 device, it seems the BL was updated to 4 on the 2nd roll out of Oreo 8.1. And having checked ALL stock Nougat variants, there was never any release of 7.1 with a bootloader binary 4!
I presume the BL Binary version is the 5 character from the right on the picture. (underlined red) :good:
It would make sense for Samsung to give the end user a choice what software they want, by keeping the BL version the same or giving a choice of BL selections to allow upgrade or downgrade.
Anyway, I rolled back to Oreo 8.1 with the binary 4 BL. And unfortunately there aren't many CUSTOM roms , nor a working TWRP for the Samsung Galaxy Active Tab2.
Thanks again :good:
Click to expand...
Click to collapse
Yes the bootloader is 5th from the right.
I don't own a tab2. If no work twrp can be found and you want to at least have root try using magisk and used the patch root method.
Also to avoid possible upgrade turn off automatic updates in setting - software update as well as in developer option - auto update system.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

spawnlives said:
tsam19 said:
spawnlives said:
Yes the bootloader is 5th from the right.
I don't own a tab2. If no work twrp can be found and you want to at least have root try using magisk and used the patch root method.
Also to avoid possible upgrade turn off automatic updates in setting - software update as well as in developer option - auto update system.
Click to expand...
Click to collapse
Have rooted the device no problem with magisk and patching the original boot img file. Then flashing patched boot img via odin. Causing device verification to need to reformat the device, resulting in correct root.
Once a device , this device is rooted, no official updates can be installed anyway. When you try to uodate software, a pop up shows as the device recognises the software has been modified.
As for TWRP there ISN'T any version of TWRP available for the Samsung Galaxy Active Tab2 (SM-T395). I have even emailed the makers , developers of TWRP why there isn't one in their device inventory list on their webpage.
So no TWRP, and NO custom roms either for this model.
My concern , was all about finding a valid , safe way to downgrade back to original Nougat 7.1. And until someone can produce a working image with a BL with binary 4. Then there's only one optiin and that is to buy another untampered device with Nougat 7.1 out of the box and leave it un updated. :good:
Thanks for replying.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

tsam19 said:
Hello all
Been a member here for some time now and have a perplexing issue.
I upgraded a Samsung Device SM T395 to OS Pie 9 and decided I didn't like it. (There are no other posts with help on this matter)
I kept the STOCK roms Nougat 7.1 and Oreo 8 and want to put Nougat 7.1 back on my device , but is proving difficult using ODIN 13.3.1 or any other version of Odin. The result is FAIL, that's using a combination of AP, CSC, CP and BL.
I managed to get Oreo 8 back on it, but want Nougat 7.1 original installed instead.
Can anyone tell me can ADB Fastboot be used to Flash a Stock Rom back on a Samsung Device or is Odin the only method?
I know there are other similar programs like QFIL and Qualcomm that I have used for the Mi Max brand devices.
The device was rooted with Nougat 7.1 originally and I have USB debug set and FRP / OEM lock off also. So there's no problem there.
The last resort (stupidly expensive idea :crying is for me to buy another exact device that has Nougat 7 installed when boxed up!
I don't see how upgrading to Pie 9 and then wanting to go back to the original factory installed rom is a big problem, can anyone explain?
Would a CUSTOM Nougat 7.1 rom work if installed via TWRP ?
I have also come across this COMBINATION Software https://samsungcombinationfile.com/samsung-sm-t395 that is supposed to allow the downgrading of Android software, but hasn't worked as I had been lead to believe.
https://combinationfirmware.com/combination-samsung-galaxy-tab-active/
Thanks for reading :good:
Click to expand...
Click to collapse
To answer your question of how is downgrading such a big problem, it is due to security reasons, to keep your device as secure as possible with the newest available software and the latest security updates.
Sent from my SM-S767VL using Tapatalk

Firmware, CSC and Samsung

Hello, I wanted to ask a few questions
After a firmware flash with XPG CSC code for example is it possible to change the CSC code to THL and vice versa?
Is there really any way to lower firmware to a lower version?
If so, what file / path do I need to do this?
what is the differences between OXA and OXM?
Is there a place where you can read about the new changes that Samsung has made in recent years in terms of security that can not flash firmware to an older version and can not change CSC codes?
I know how to root a phone and use ADB (ADB in a very basic way)
Thanks!

up

This post has some information
Fail to flash with odin to downgrade from android 10
About a year ago, I downloaded firmware for N960F from updato and downgraded from Pie to Oreo using Odin and it went all so well. This time around I'm trying to downgrade from Android 10 to the exact same firmware version I used back then, just...
forum.xda-developers.com
But since about the s8-s9 days Samsung implimented anti rollback , wich are not so clear , some phones cand downgrade to a previous version and some dont due the firmware setting the minimun version bar higher so to speak .
Wich model are you trying to downgrade?

Choose correct samsung firmware

I have an A51 samsung phone on the download mode screen i get the b:5 k:5 s:5 which im told are important to choosing firmware, can anyone explain them so i dont use the wrong one and possibly brick my phone also what else should i know about samsung phones in general before installing a firmware

seif113 said:
I have an A51 samsung phone on the download mode screen i get the b:5 k:5 s:5 which im told are important to choosing firmware, can anyone explain them so i dont use the wrong one and possibly brick my phone also what else should i know about samsung phones in general before installing a firmware
Click to expand...
Click to collapse
You can flash a firmware that has a binary of 5 or higher, not lower than 5. To identify which binary a firmware has, look at the firmware build number, the 5th character from the right end of the build number represents the binary value for that firmware. Your current firmware build number should have a 5 in that position in it's build number.
As long as you choose a firmware that is for your specific device's model number, from your specific region/country/carrier with a binary that is equal to or higher(not lower) than your currently installed binary, you should be fine as long as you carefully follow instructions to flash the firmware via Odin.
Note: once you upgrade the binary to a newer binary, you can't go back to the binary that you had before. So, if you upgraded from binary 5 to binary 6, you can't go back to 5, 4, 3, 2 or 1 using official methods. It is technically "possible" to downgrade, but that is conditional, it "can" be done depending on the device and certain aspects of the software state of the device. It can be difficult for the uninitiated and risky for the initiated and uninitiated alike.

https://forum.xda-developers.com/t/s10-g973f-problem-bootloader.4536141/post-87950127

Thanks guys, another question, i read that basband matching is important although you can get away with not matching basebands so can anyone clarify a bit more from experience, also if it happens that someone flashed a u5 phone with a u4 or u3 for example what will go wrong and whats the possible ways to fix it . And thankss

Rooting, ODIN, Firmware, CSC Information And Myths Debunked / Noob's Guide To Samsung Devices
Since a lot of people will have their Galaxy S22 Ultra soon and I myself am thinking about either getting an S21 Ultra or S22 Ultra, I wanted to summarise a lot of information I found out during researching as Samsung devices are quite different...
forum.xda-developers.com