I wanted a basic clean ROM with the minimum amount of apps.
Anybody can add their own apps afterwards from an SD card, to fit their own needs.
Standard launcher is more than enough for me.
If anybody has some special requests let me know.
Based on Official 5.0 Rom from SmartQ so with Bluetooth support and Android 4.0.4
Tweaks:
Code:
Pre-Rooted (Standard in Original firmware since v5.0)
Market Fix (Apps like facebook will show up)
German/English CWM Recovery (English will follow)
Several build.prop tweaks
Custom Boot logo
Apps:
Code:
No chinese apps
Basic Android Apps
Adobe Flash (11.1)
ES File Explorer (1.6.1.6)
Titanium Backup (5.3.2)
Removed most live wallpapers
Download Location:
http://www.mediafire.com/download.php?sy64s9s33z73iku
Flash Instructions:
Code:
(Just to be sure we will delete any user data first following these instructions)
(Use volume up and down to move selection up and down and power to select)
1 Download the ROM file.
2 Copy the zip file to a Micro SD card
3 Reboot into Recovery (Either from Android by holding the powerbutton for a couple of seconds and choose reboot, recovery, or by holding volume down and the powerbutton until the Recovery appears while the
device is switched off)
4 Choose the 3rd option (Data Loeschen, Wipe data/factory reset)
5 Choose the 8th Option (Ja Loeschen alle Nutzerdaten/Yes delete all user data)
The device will be busy for some seconds clearing all user data.
6 Choose the 2nd Option (ZIP von SD flashen/Apply update from sdcard)
7 Choose the 3rd Option (Signaturcheck Flip/Toggle Signature Verification)
Below the following line will appear (Signaturcheck: Aus/Signature Verification: Off)
8 Choose the 1st Option (Waehle ZIP von SD/Install from SD card)
9 Choose the "FileName.zip" file from the SD card
10 Choose the 8th Option (Ja. Kopiere FileName.zip/Yes. Copy FileName.zip)
Update will be installed, follow the steps on the bottom of the screen.
When installation is finisched:
11 Choose the last option (++++ Zurueck ++++/++++ Back ++++)
12 Choose the 1st Option (Ten3 neu starten/Reboot system now)
Update finished and the device will boot into Android.
Add all apps you like via the SD card to the tablet.
Have Fun!!
Changelog:
Code:
5.0.1:
Based on firmware version v5.0
Added Adobe Flash (11.1)
4.5.1:
Based on firmware version v4.5
Initial Release
Thanks to the following People for their tweaks and guides : !Sumit, D3BA, amit_sen, Coldbird
Hello i make a mistake and my tablet is showing always the smartq logo. Can you give me an active link for your rom. I thing that could help.
Anyway thank you very much
This is CyanogenMod 10 created by me
What works:
- everything
What doesn’t work:
- Offline charging (can't work good)
- GSM and AUDIO (easy fix but i don't have a phone)
- Funny sim (can't be fixed)
- Youtube HQ
Gapps:
http://www.mediafire.com/?gumixbd9i2jciei
Rom:
http://www.mediafire.com/?vo170t7j57tc3w0
Source device folder: https://github.com/lgics/cm_device_lge_e720/tree/jellybean
Prerequisites:
Back up your contents of the sd card to PC
Root your phone
Install a recovery Clockworkmod
enter in recovery
Enable USB-MS toggle: Copy ROM.zip and GAPPS.zip
Disable USB-MS
Skip to the Installation section
Installation:
Enter recovery
Make a nandroid back up
Make full wipe (except wipe sd) for the first time installation
Flash from ZIP: Select ROM and reboot
Flash GAPPS and reboot
Have fun!
fixed audio and sensors
markolino631 said:
fixed audio and sensors
Click to expand...
Click to collapse
Nice I might have to give this a try soon on my back up LG Optimus Chic !
sim card not detected
sim card not detected & menu button not working because of that cant access task manager.
i know but i cannot fix it due to an old baseband
Rom Features :-
ROM Version Android 4.4.2 (stock rom)
Fastest and Most Stable ROM Ever
Specially for Gamers
More free RAM
Otg bug fixed permanently
Over Heating issue solved
Batterr multitasking
Camera works perfectly 8mp at fulscreen preview with any camera app
Battery Drain overnight minimised to 0%
UNITE2 stock animation
ROM is prerloded with gapps
Pure kitkat apps icon
Most Stable Bugless ROM Ever
Heavily Tweaked
Amazing Battery Life
fully stock rom..
Note :- Before flashing this ROM please make sure that your are on Stock Kitkat.
Step 1 :- Firstly make sure that you have successfully rooted and installed CWM Recovery in your device, After that proceed further.
Step 2 :- Now Go to Recovery Mode by pressing Vol+ and Vol – and Power Button simultaneously and do complete backup of your current rom.
Step 3 :- Now download and Place ROM zip to the root of your SD card.
Step 4 :- Again go to Recovery mode by pressing Vol+ and Vol – and Power Button simultaneously.
Step 5 :- Do a complete Wipe Data, Cache and Delvik Cache.
Step 6 :- Now Choose Install Zip from SD card & Click Yes.
Step 7 :- Wait for a while till it finishes.
Step 8 - After completion Reboot your device.
Step 9 -Enjoy your stock-ultimate rom
download link-
Hey All
Introducing My New Rom : Lolipop (cyan theme) For S Duos 2
Based On Stock 4.2.2 Rom
Warnings :
1. You are now Void your Warranty …….
2. Backup all your personal apps and important data to avoid loosing them …
3. Do all steps perfectly And carefully ……
4. I am not responsible for any mistake and Brick your phone ….
Features :
1. Fully S5 themed
2. Deodexed
3. Fully rooted and boaltware removed
4. Few statusbar tweeks added
5. Build prop tweeks added
6. Optimized Ram memory
7. Viper Audio fx added
8. Some nessasary apps added to system
9. int.d tweeks added
10. S5 boot animation,sounds etc added
How To Install :
1. Download 2 parts Of the Rom From 4shared Link Given Below
2. You Mast Have Clock Work Mode Recovery on your device . If not then Follow the link :
http://forum.xda-developers.com/show....php?t=2658817
3. After Download 2 parts Zip
4. Copy the Lolipop.Zip on Your SD card
5. Turn off Your Phone And press Volume up button+home button+power at a time
6. Aftar apearing CWM recovery go to install Zip and install the rom file from sd card you downloaded before
7. Now reboot system and wait for approximately 10 minutes
8. Now you are good to use this rom ......
Description is given in next reply ...
Downloads :
Rom= http://www.4shared.com/zip/_P6h6wrFce/lollipop_50_s7582.html
Patch= http://www.4shared.com/zip/bJHbUWF8ce/Patch.html
note=
clear cache first then first install patch then after Rom
BUGS :
no any kind of bugs......
You can contact me facebook= https://m.facebook.com/the.love.boy.farhan
Flashing the ROM
Did anyone flash the ROM?
No . This theme Not liked
Pi Dark [substratum] - Apps on Google Play
Android Pie like Substratum Theme 🎨
play.google.com
Default Dark Theme for Substratum - Apps on Google Play
Dark material theme for the Substratum Theme Engine
play.google.com
[GUIDE/TUTORIAL/HOWTO] Motorola Moto G 4G Any version to Android 9 Pie/LineageOS 16
[GUIDE/TUTORIAL/HOWTO] Motorola Moto G 4G/LTE 2013 Peregrine XT1039 Any version to Android 9 Pie/LineageOS 16
Complete guide to install Android 9 on your Motorola Moto G 4G/LTE.
This tutorial only applies to this model, to check the correct version:
in Android, go to Settings > About, make sure it is this model: Motorola Moto G 4G 2013 Peregrine XT1039.
We will only use a USB 2.0 port and a phone fully charged (but USB3 works too).
CHANGELOG
v14. TWRP 3.5, Magisk 22, BitGApps
v13. Rework tutorial (TWRP 3.4 manipulation, latest Magisk)
v12. Latest fastboot binary, TWRP 3.4, USB drivers for 32/64 bits, Magisk root, boot logo and simpler tutorial
v11. LOS 16 2020 Septembre update (thx to @sdembiske)
v10. LOS 16 2020 May update
v9. Updated pack with TWRP recovery 3.3.1-0, fix glitches in tutorial
v8. Moved tutorial for Android 9 and updated pack with TWRP recovery 3.3.0-0 and Addonsu 16
v7. Updated pack v5 with newest TWRP and removed outdated custom kernel, added links for newest ROMs
v6. Added Google Mobile Services (GMS) certification
v5. Added custom Bootlogo flash
v4. Recovery TWRP 3.2.1-0, MD5 signature for kernel and recovery
v3. Custom kernel, overclock, recovery TWRP 3.1.1-0, no /cache in F2FS (bootloops)
v2. Moved to Android 7.1 Nougat
v1. Initial release
1 ) WHAT YOU NEED
- djibe Moto G 4G pack (~20 Mo): http://bit.ly/motoGLTEdjibepackv5
(Contains link to Motorola Bootloader unlock + flashable Bootloader unlocked logo + TWRP Recovery 3.5.0_9-0 + Magisk root + Motorola USB drivers x32/64 + fastboot)
+ ROM LineageOS Unofficial 16: https://forum.xda-developers.com/moto-g/4g-development/rom-lineageos-16-0-t3835030
Download latest build available here: https://mega.nz/file/haBkzLCA#Aw4qZ09cKi5Jqs-p6SiUaDpxD_bMOQ8PzXACT1xKhr0
Want older and stable versions ?
Use this if you want to give/sell your phone to someone.
Grab Lineage OS 14.1 for peregrine here: https://forum.xda-developers.com/t/rom-lineageos-14-1-substratum-for-moto-g-lte-peregrine.3967207/
+ BitGApps ARM 9 R13: https://xiaomifirmware.com/download/16147/
For LineageOS 14.1, use this package: https://opengapps.org/?arch=arm&api=7.1&variant=pico
+ a microSD card formatted in FAT32 : copy ROM, GApps, Magisk and logo.zip on it.
You can chose another boot logo from this collection: https://forum.xda-developers.com/showthread.php?t=2686441
And download the file according here: https://androidfilehost.com/?w=files&flid=49201
2 ) INSTALL DRIVERS
Install Motorola 64 bits drivers (32 or 64 bits depending on your Windows version).
Then plug Moto G to PC and let the install go on.
3 ) BACKUP YOUR DATA
When your phone is connected to Windows, search for all .jpg, .mp3, .mp4 files on your phone and make copies on your PC.
Then, with an app like Backupyourmobile, backup all your SMS, MMS, contacts.
Make sure the backup is located on microSD card.
4 ) UNLOCK BOOTLOADER
Update your Moto G to the latest official Android 5.1 Lollipop.
In Android, go to Settings > About > Updates. Make sure you have latest version.
Then, go to Motorola website (shortcut in my archive or right below):
https://accounts.motorola.com/ssoau...ct/standalone/bootloader/unlock-your-device-b[/URL]
Subscribe using your Google Account or email.
Shut down phone.
Power it on in fastboot mode: Hold Power et Volume- during 3-4 secondes and release.
Screen is black with lines of text, starting with AP Fastboot Flash Mode (S).
Connect phone to USB2, wait for fastboot drivers to install.
In Windows, select the /flash subfolder you unzipped from my archive.
On keyboard, make a combo Shift + right click -> Open command windows here.
Write this command in Windows terminal :
Code:
fastboot oem get_unlock_data
confirm using Enter.
Command sends back a message like this :
Code:
$ fastboot oem get_unlock_data
(bootloader) 0A40040192024205#4C4D3556313230
(bootloader) 30373731363031303332323239#BD00
(bootloader) 8A672BA4746C2CE02328A2AC0C39F95
(bootloader) 1A3E5#1F53280002000000000000000
(bootloader) 0000000
OKAY [ 0.146s]
Select all text -> right click -> select all.
Open a notepad editor, and paste text.
Rework the text to get it on 1 line, and remove all spaces and "(bootloader)" messages.
It should look like this : 0A40040192024205#4C4D355631323030373731363031303332323239#BD008A672BA4746C2CE02328A2AC0C39F951A3E5#1F532800020000000000000000000000
Now, copy this text line and paste it in Motorola website : https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b
Below, click on Verify Eligibility.
Next, I Agree.
You get the unlock key by email, looking like : 56ITMEJ2BFHX5JVXMA4J
Use this unlock key in the following Windows command :
Code:
fastboot oem unlock YOUR_UNLOCK_CODE
Confirm with enter and wait a moment ... till success is confirmed : "Unclock Completed, wait to reboot",
don't disconnect it from PC !
phone reboots to Android with a blank screen "Warning, Bootloader unlocked".
Keep Windows command opened.
4 ) FLASH RECOVERY & BOOTLOADER LOGO
Shutdown phone again.
Power on in fastboot mode: Hold Power et Volume- during 3-4 secondes and release.
In Windows command, use this command:
Code:
fastboot flash recovery twrp-3.5.0_9-0-peregrine.img
confirm with Enter.
Terminal confirms : "Finished. Total time: 0.670s".
### In bootloader screen, you see error "mismatched partition size (recovery)" ? No problem. TWRP is smaller than stock recovery.
### For future TWRP updates, TWRP binary can be flashed from TWRP recovery itself (Install > Install Image)
Now, on the phone in fastboot mode, press Volume- to select the Recovery option. Confirm with Volume+.
Welcome to TWRP 3.5 recovery.
TWRP asks for Keep System Read Only ? -> check "Never show this screen during boot again" and Swipe to Allow Modifications.
### You don't see this waring screen? Then you'll get "TWRP unable to mount storage" while trying to wipe partitions.
### > in TWRP, go to Reboot > Recovery so Recovery will refresh and popup the partition writing privilege.
5 ) WIPE PARTITIONS
In TWRP home screen, go to Wipe > Format data.
Type yes and confirm to format partition.
Go to Wipe > Advanced wipe,
select Dalvik, Cache, System, Data, Internal Storage (if you really made a backup from step 2), then Swipe to Wipe,
then back.
### Don't try F2FS, it won't work.
Go to Reboot > Recovery.
Let phone reboot.
6 ) FLASH ROM, OPENGAPPS AND BOOTLOGO
Back to TWRP Home menu. Then tap on Install > choose lineage*.zip,
(if you don't see the files, tap on Select Storage and make sure Micro SDCard is active).
then Add more Zips > BiTGApps*.zip,
optional: then Add more Zips > logo*.zip,
then Swipe to confirm Flash.
Wait for operation to end.
### Don't flash Magisk now
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System.
Wait for the phone to boot during 10 minutes.
7 ) ROOT ACCESS AND DEVELOPER MENU
With Magisk, you are root once phone is started. No extra manipulation needed.
For developer menu: open the Settings menu > About Phone.
Tap on the "Build number" entry seven times. You should be notified, that the developer settings are now active.
Now go to Settings menu > System > Developer settings.
Switch Advanced restart on.
Now use menus to Restart > Recovery.
Back to TWRP, go to Install > magisk*.zip
Reboot.
You are root.
8 ) ENHANCE PHONE
Go to Settings > Developer options
In drawing, set Windows animation scale, Transition animation scale to Animation off (or 0.5x).
Install Greenify, grant Superuser privileges and follow tutorial to set as System app.
Switch on:
- Smart hibernation > Enabled
- Light hibernation
- Aggressive sleep
- Automatic hibernation
That's it.
### When I play music, it comes out of the phone speaker but not the headphone jack.
Use stock AudioFX app to fix this.
Enjoy,
djibe
New version to upgrade Moto G to Android 7.1 Nougat
Enhenced tutorial
Updated version with overclocking of the Moto G 4G
Overclocking introduced
Tutorial updated for better performances
TWRP 3.2 and MD5 file verification for Kernel flash
Added : flash bootloader unlocked screen at boot.
New version of tutorial to obtain the Google Play Certification.
Do you think I should upgrade tutorial for Lineage OS 15.1 ?
Thread and pack updated with latest LOS updates.
guide updated
Tutorial updated
Hi guys, tutorial updated to enjoy Android 9 on your old Moto G 4G !!!
Enjoy
Added download links for older Android versions if needed
Checked for newer packages.
Tutorial is up to date.
Works, except no sound from headphone jack
This worked for me today which I was chuffed about until I started to use the phone and found that when I played music it came out of the phone speaker but not the headphone jack. Any ideas?
Robert Steed said:
This worked for me today which I was chuffed about until I started to use the phone and found that when I played music it came out of the phone speaker but not the headphone jack. Any ideas?
Click to expand...
Click to collapse
I've just found the solution to this which is to disable Audio FX.
@Robert Steed. thx for sharing.
@Robert Steed. thx for sharing.