Database Info

I need Help with Rooting OP6 stable not beta 9.0.2, bootloader is unlocked

So, i have used my whole saturday on unlocking the booloader which was the easiest and quickest and then trying to root, but that has failed every time. I first flashed the stock firmware zip 9.0.2 then I go back I dont reboot and flash the twrp and magisk zip and then it wont boot up,
when I try rebooting after flashing the firmware back to the system it sends me to the firmware,
when I try flashing a new firmware and then boot into fastboot then twrp and flash magisk it wont boot up,
and when I do the same only with twrp it wont neither.
I have tried sevel magisk versions, 17.1,17.2,17.3 none of them worked
as for the twrp blu spark or the one from the twrp website, i was always able to boot into twrp but not really to flash it as that would end in a twrp loop
can PLEASE anyone, someone, with a good heart and patience help me ? im really loosing my ****s over this
:fingers-crossed::fingers-crossed:

Try booting into blu_spark twrp
Installing blu_spark twrp
Rebooting to blu_spark twrp
Install magisk 17.3 or 17.1 (I am using 17.3 because it it beta but less stable.)

Faaris Ansari said:
Try booting into blu_spark twrp
Installing blu_spark twrp
Rebooting to blu_spark twrp
Install magisk 17.3 or 17.1 (I am using 17.3 because it it beta but less stable.)
Click to expand...
Click to collapse
can you provide me with the files ? plus
does it make a difference if I take these twrps compared to the one im using from their website ? because I dont see how this can be the fault ?

galaxyss8 said:
can you provide me with the files ? plus
does it make a difference if I take these twrps compared to the one im using from their website ? because I dont see how this can be the fault ?
Click to expand...
Click to collapse
The normal twrp is known to be buggy on the OnePlus 6 since there was encryption and stuff. Here is the blu_spark twrp IMG to boot:
https://forum.xda-developers.com/devdb/project/dl/?id=30485
And here you need to flash the blu_spark twrp: https://forum.xda-developers.com/devdb/project/dl/?id=30484
Flash that then reboot into recovery again
Then flash magisk
If this doesn't work for you I think there is another way.

Faaris Ansari said:
The normal twrp is known to be buggy on the OnePlus 6 since there was encryption and stuff. Here is the blu_spark twrp IMG to boot:
https://forum.xda-developers.com/devdb/project/dl/?id=30485
And here you need to flash the blu_spark twrp: https://forum.xda-developers.com/devdb/project/dl/?id=30484
Flash that then reboot into recovery again
Then flash magisk
If this doesn't work for you I think there is another way.
Click to expand...
Click to collapse
ive done that now and im waiting again in the; the boot loader is unlocked and software integrety.. winodw
im waiting now for some minutes, i flashed the blu spark zip pressed back went to reboot pressed on reboot to recovery and flashed magisk and then reboot to system, thats where i am now

galaxyss8 said:
ive done that now and im waiting again in the; the boot loader is unlocked and software integrety.. winodw
im waiting now for some minutes, i flashed the blu spark zip pressed back went to reboot pressed on reboot to recovery and flashed magisk and then reboot to system, thats where i am now
Click to expand...
Click to collapse
You might be on the wrong slot. DO you even have a system to boot to? Not sure why you even tyred flashing the 9.0.2 ROM. If I was you I would start over. Use the fastboot ROM to get a clean wiped system booting. After that
fastboot boot bluespark twrp v86. Img
Flash bluespark twrp v86. Zip
Reboot revovery
Flash magisk 17.1

yldlj said:
You might be on the wrong slot. DO you even have a system to boot to? Not sure why you even tyred flashing the 9.0.2 ROM. If I was you I would start over. Use the fastboot ROM to get a clean wiped system booting. After that
fastboot boot bluespark twrp v86. Img
Flash bluespark twrp v86. Zip
Reboot revovery
Flash magisk 17.1
Click to expand...
Click to collapse
I flashed the rom because my phone didn't boot up anymore after either flashing TWRP or magisk.
Why should I use the fastboot room, what is the benefit if I use it.
Is the reboot to recovery necessary ? I feel like that part is actually not working properly ?

galaxyss8 said:
I flashed the rom because my phone didn't boot up anymore after either flashing TWRP or magisk.
Why should I use the fastboot room, what is the benefit if I use it.
Is the reboot to recovery necessary ? I feel like that part is actually not working properly ?
Click to expand...
Click to collapse
Yes the reboot to recovery is the most nessesary part of it as it will change slots.
You can try boot to recovery
Flash oos full rom
Flash bluespark twrp. Zip
Reboot recovery
Flash full ROM again
Flash bluespark twrp. Zip again.
Reboot recovery
Flash magisk.

yldlj said:
Yes the reboot to recovery is the most nessesary part of it as it will change slots.
You can try boot to recovery
Flash oos full rom
Flash bluespark twrp. Zip
Reboot recovery
Flash full ROM again
Flash bluespark twrp. Zip again.
Reboot recovery
Flash magisk.
Click to expand...
Click to collapse
Can you explain how to properly boot back into recovery?
Previously I either just went on the back button and flashed the other Zip's or I went back to the reboot overview and pressed recovery there but that also did not seem to work properly I think.

galaxyss8 said:
Can you explain how to properly boot back into recovery?
Previously I either just went on the back button and flashed the other Zip's or I went back to the reboot overview and pressed recovery there but that also did not seem to work properly I think.
Click to expand...
Click to collapse
Just press back button in Recovery/ reboot / choose recovery.

OP 6 freezes at fastboot screen after miui 10

I followed instructions carefully. Unlocked boot loader, installed Beta 11 (newest one), flashed TWRP. Next, flashed windows flasher.bat.......... back to fastboot, booted into recovery, VOILA, no TWRP, standard recovery. Reboot and stuck on bootloader. Have to unbrick and back to square one. happened 2 times. Now, there is an option in MIUI 10 unpack that has "flasher windows no format.bat. Anyone else having this problem?

Reading the instruction on the miui rom thread, i guess to understand that you need to boot twrp, it means you need to boot it like when you go to install it, miui rom has no twrp integrated, so in bootloader run twrp img via adb then install it as usual then flash the last miui 10 fix zip... Note that i give you this advice only by reading the thread because i've not tried that rom

I understand your apprehension, I would also, but thanks for your input.

The issue is when you flash miui 10 via instructions, it wipes out everything, so you have to re install twrp, but miui10 fixes zip is gone, and therefore it reboots to a frozen fastboot. OH well.........

Why you don't try to flash bluespark twrp recovery in fastboot? perhaps you need to reboot to recovery and flash magisk

Toni Moon said:
Why you don't try to flash bluespark twrp recovery in fastboot? perhaps you need to reboot to recovery and flash magisk
Click to expand...
Click to collapse
I'll try blu spark, if that doesn't work, i'll try to flash the rom via twrp, and now cmd

You have to use OB8 in both slots or else MIUI 10 won't work.

ProtoDeVNan0 said:
You have to use OB8 in both slots or else MIUI 10 won't work.
Click to expand...
Click to collapse
how the heck do you do that??

could all this be because i'm on beta 11 and not 8?

Android 10 & Custom ROM & Slot A + B

Hello Android developers and enthusiasts,
I've been installing ROM since 2011 so I would not call myself a n00b however I seemingly cannot install an Android 10 ROM without issues. So this is a plea for help and advice!
I know you need to have OOS installed before you install a custom ROM so I use Auto Flash ROM to install OOS with Android 9 via System Update. I then boot and set up phone, install update, reboot and then install the OOS android 10 via the System Update. I then have a OOS installed with Android 10.
Why would I use such an elaborate method you may ask? Well, I tried to download latest OOS from OnePlus site and wipe phone and then install OOS but that fails (didn't record the error I'm afraid).
I then download all the ROM + dependencies on an USB stick and use fastboot to flash Mauronofrio TWRP. I then follow the steps in the ROM instructions. For EvolutionX these were:
First Time Install / Clean Flash
- Have OOS 10.3 flashed to both slots!!
- Boot to recovery
- Flash BUILD.zip (TWRP built-in)
- Wipe Cache
- Format data
- Reboot to recovery (optional)
- Flash Magisk.zip (optional)
- Reboot to system & #KeepEvolving
Click to expand...
Click to collapse
I followed these to the letter but when i rebooted system I got a snapdragon error and it wouldn't even boot into TWRP until I used fastboot to flash boot into TWRP. I also tried HavocROM and same happened.
I did manage to install Syberia using above method but I didn't like the ROM that much unfortunately.
Finally, I've also read up a lot on Slot A and B but it still is not very clear to me. I think I understand it but what happens does not confirm my theories
I therefore have some questions:
- Should I be able to wipe my phone and install OOS on a wiped phone and then install a custom ROM?
- When I install ROM and it says "Reboot Recovery" and then install ROM again. But if I check what slot is being used the reboot doesn't seem to change the slot. My assumption was that booting recovery was to install ROM in the other slot. Is that correct?
Any other tips you can give me?
Again, I like to stress I am not new to installing custom ROMs so I am a bit disappointed that this is causing me such grief.
Following some answers I will retry tomorrow so I can give some more details if needed. For now, appreciate any help.

roel1976 said:
Hello Android developers and enthusiasts,
I've been installing ROM since 2011 so I would not call myself a n00b however I seemingly cannot install an Android 10 ROM without issues. So this is a plea for help and advice!
I know you need to have OOS installed before you install a custom ROM so I use Auto Flash ROM to install OOS with Android 9 via System Update. I then boot and set up phone, install update, reboot and then install the OOS android 10 via the System Update. I then have a OOS installed with Android 10.
Why would I use such an elaborate method you may ask? Well, I tried to download latest OOS from OnePlus site and wipe phone and then install OOS but that fails (didn't record the error I'm afraid).
I then download all the ROM + dependencies on an USB stick and use fastboot to flash Mauronofrio TWRP. I then follow the steps in the ROM instructions. For EvolutionX these were:
I followed these to the letter but when i rebooted system I got a snapdragon error and it wouldn't even boot into TWRP until I used fastboot to flash boot into TWRP. I also tried HavocROM and same happened.
I did manage to install Syberia using above method but I didn't like the ROM that much unfortunately.
Finally, I've also read up a lot on Slot A and B but it still is not very clear to me. I think I understand it but what happens does not confirm my theories
I therefore have some questions:
- Should I be able to wipe my phone and install OOS on a wiped phone and then install a custom ROM?
- When I install ROM and it says "Reboot Recovery" and then install ROM again. But if I check what slot is being used the reboot doesn't seem to change the slot. My assumption was that booting recovery was to install ROM in the other slot. Is that correct?
Any other tips you can give me?
Again, I like to stress I am not new to installing custom ROMs so I am a bit disappointed that this is causing me such grief.
Following some answers I will retry tomorrow so I can give some more details if needed. For now, appreciate any help.
Click to expand...
Click to collapse
Hi!
I had this exact same problem a couple months ago. Rebooting to recovery used to change slots for me, but then it stopped.
What you can do is change active slot manually on Reboot section. By doing this, you don't even have to reboot to recovery in other to flash the other slot (altough I do it just to be safe).
And remember: the rom is flashed on the inactive slot, so after the final flash you gotta change slots one more time.

When you flash one ROM on top of another different ROM, particularly OOS to custom, always wipe data and not format data, because some custom ROMs do not support being unencrypted in the first time and then encrypt on the first boot. So do it like this:
Flash OOS
Flash TWRP
Reboot recovery
Flash OOS
Flash TWRP
Reboot system
Complete initial setup
Reboot to recovery
Wipe (not format) data
Flash custom ROM (start here for dirty flashing ROM update)
Flash TWRP
Reboot recovery
Flash custom ROM
Flash TWRP
Reboot recovery
Flash Magisk
Reboot system
I don't like built-in TWRP in custom ROMs. I always use @mauronofrio's TWRP. So regardless if the custom ROM I'm using has TWRP built-in or not, I always use the method above. I didn't have a problem with installing ROMs using his TWRP. Slots always switch when flashing ROM.

Thanks for the info, it really helps.
One question: in your experience can you wipe your phone and then installl OOS on the wiped phone?

So I just booted into TWRP, did standard wipe action: Data, Cache, and Dalvik. I then try to flash the latest OOS zip and I then get this error:
Error applying update: 7 (ErrorCode::kInstallDeviceOpenError)
Updater process ended withL ERROR: 1.
Error installing zip file: '/usbstorage/00, INSTALL/OnePlus6Oxygen_22_OTA_044_all_2002220042_a46425f1bfe43d2.zip
FIXED: I was using TWRP 3.3.1.11 and I then found out there was a newer version: 3.3.1.18 which you can get here: https://sourceforge.net/projects/mauronofrio-twrp/files/Enchilada/
I am now able to install OOS from scratch (ie wiped phone).

remewer said:
When you flash one ROM on top of another different ROM, particularly OOS to custom, always wipe data and not format data, because some custom ROMs do not support being unencrypted in the first time and then encrypt on the first boot. So do it like this:
Flash OOS
Flash TWRP
Reboot recovery
Flash OOS
Flash TWRP
Reboot system
Complete initial setup
Reboot to recovery
Wipe (not format) data
Flash custom ROM (start here for dirty flashing ROM update)
Flash TWRP
Reboot recovery
Flash custom ROM
Flash TWRP
Reboot recovery
Flash Magisk
Reboot system
I don't like built-in TWRP in custom ROMs. I always use @mauronofrio's TWRP. So regardless if the custom ROM I'm using has TWRP built-in or not, I always use the method above. I didn't have a problem with installing ROMs using his TWRP. Slots always switch when flashing ROM.
Click to expand...
Click to collapse
I tried this method and everytime I can't seem to flash oos onto the other slot because when it reboots to recovery the folder is encrypted so I can't see which file is the zip. How do I flash the seccond OOS if it shows up encrypted in TWRP.
I have a OnePLus 6 with the latest OOS now because I got into boot loop and i used a flash-all.bat to get back to stock. I also use maronofrio's twrp because that works.

harshybar said:
I tried this method and everytime I can't seem to flash oos onto the other slot because when it reboots to recovery the folder is encrypted so I can't see which file is the zip. How do I flash the seccond OOS if it shows up encrypted in TWRP.
I have a OnePLus 6 with the latest OOS now because I got into boot loop and i used a flash-all.bat to get back to stock. I also use maronofrio's twrp because that works.
Click to expand...
Click to collapse
If you can boot OOS fine, try to do a local update so that both slots have OOS. Then try to flash a custom ROM again using the method I've mentioned.

remewer said:
If you can boot OOS fine, try to do a local update so that both slots have OOS. Then try to flash a custom ROM again using the method I've mentioned.
Click to expand...
Click to collapse
When you say local update you mean while I am running the rom, go to settings then do update from local source?

harshybar said:
When you say local update you mean while I am running the rom, go to settings then do update from local source?
Click to expand...
Click to collapse
Exactly

GuestD2559 said:
When you flash one ROM on top of another different ROM, particularly OOS to custom, always wipe data and not format data, because some custom ROMs do not support being unencrypted in the first time and then encrypt on the first boot. So do it like this:
Flash OOS
Flash TWRP
Reboot recovery
Flash OOS
Flash TWRP
Reboot system
Complete initial setup
Reboot to recovery
Wipe (not format) data
Flash custom ROM (start here for dirty flashing ROM update)
Flash TWRP
Reboot recovery
Flash custom ROM
Flash TWRP
Reboot recovery
Flash Magisk
Reboot system
I don't like built-in TWRP in custom ROMs. I always use @mauronofrio's TWRP. So regardless if the custom ROM I'm using has TWRP built-in or not, I always use the method above. I didn't have a problem with installing ROMs using his TWRP. Slots always switch when flashing ROM.
Click to expand...
Click to collapse
@Cypher_01, Try this guide. This worked for me. I did not reinstall Nikgapps. Maybe that's where the problem lies? Don't forget to change the update slot at the end before you restart.​

Problem with flashing custom ROM (error 255)

Hey guys,
after searching through different websites and guides you are my last resort to get a custom ROM running on my Redmi S2.
Everytime i try to flash a custom ROM i get the error 255. Here is what i tried until now (bootloader is unlocked):
- flashing twrp(twrp-3.2.1-0-ysl) to recovery using fastboot
- wiping phone (first wipe to disable encryption since miui puts some kind of password on the hard drive that i dont know, second wipe to ensure partitions are clean for new OS)
- mounting phone to pc to transfer OS image (tried Lineage and Havoc, both modified for S2 (ysl version)) and GApps
- finally, installing OS zip (after which i get error message 255, telling me that twrp wasnt able to install the zip file)
please help me out, ask away if something's not clear

flying_shitnugget said:
Hey guys,
after searching through different websites and guides you are my last resort to get a custom ROM running on my Redmi S2.
Everytime i try to flash a custom ROM i get the error 255. Here is what i tried until now (bootloader is unlocked):
- flashing twrp(twrp-3.2.1-0-ysl) to recovery using fastboot
- wiping phone (first wipe to disable encryption since miui puts some kind of password on the hard drive that i dont know, second wipe to ensure partitions are clean for new OS)
- mounting phone to pc to transfer OS image (tried Lineage and Havoc, both modified for S2 (ysl version)) and GApps
- finally, installing OS zip (after which i get error message 255, telling me that twrp wasnt able to install the zip file)
please help me out, ask away if something's not clear
Click to expand...
Click to collapse
change your recovery..

Baim alif said:
change your recovery..
Click to expand...
Click to collapse
Mind elaborating? What do you mean exactly?

flying_shitnugget said:
Mind elaborating? What do you mean exactly?
Click to expand...
Click to collapse
use this recovery
https://files.orangefox.download/OrangeFox-Stable/ysl/OrangeFox-R10.0-1-Stable-ysl.zip

Baim alif said:
use this recovery
https://files.orangefox.download/OrangeFox-Stable/ysl/OrangeFox-R10.0-1-Stable-ysl.zip
Click to expand...
Click to collapse
so... i first tried taking the recovery.img out of the zip and flashing it via fastboot, didnt worked. after that i tried first flashing my old twrp and then (after wiping) installing the whole zip. the install finished successfully, sayed it will restart to recovery in 5 seconds... aaaand got stuck on the android screen. now it wont boot to recovery at all anymore, unless i flash the old twrp again. suggestions?

flying_shitnugget said:
so... i first tried taking the recovery.img out of the zip and flashing it via fastboot, didnt worked. after that i tried first flashing my old twrp and then (after wiping) installing the whole zip. the install finished successfully, sayed it will restart to recovery in 5 seconds... aaaand got stuck on the android screen. now it wont boot to recovery at all anymore, unless i flash the old twrp again. suggestions?
Click to expand...
Click to collapse
try to boot recovery with power button and volume up

Baim alif said:
try to boot recovery with power button and volume up
Click to expand...
Click to collapse
yes, that's what i did. i also tried booting into from fastboot and still nothing.

flying_shitnugget said:
yes, that's what i did. i also tried booting into from fastboot and still nothing.
Click to expand...
Click to collapse
hmmm... try this bro..
https://androidfilehost.com/?fid=6006931924117927913

flying_shitnugget said:
yes, that's what i did. i also tried booting into from fastboot and still nothing.
Click to expand...
Click to collapse
Try this, you have to flash first this in fastboot https://files.orangefox.download/OrangeFox-Beta/ysl/ the R10.0-1 RC1 .img file
And THEN flash this https://orangefox.download/en/device/ysl once you are in the recovery.
Then it worked for me, finally, hope this helps.

celephrn said:
Try this, you have to flash first this in fastboot https://files.orangefox.download/OrangeFox-Beta/ysl/ the R10.0-1 RC1 .img file
And THEN flash this https://orangefox.download/en/device/ysl once you are in the recovery.
Then it worked for me, finally, hope this helps.
Click to expand...
Click to collapse
so i tried this approach. i first installed how you told me to (orangefox R10.0-1 RC1 .img first), but factory reset nor installing the second recovery img worked because of the encryption miui puts on the phone. So i flashed twrp, wiped memory, flashed first orange fox img and from then installed the second img (as a zip). until here everything worked, orange fox told me that he's going to reboot to new recovery -- and i got stuck on the boot logo again. :c

flying_shitnugget said:
so i tried this approach. i first installed how you told me to (orangefox R10.0-1 RC1 .img first), but factory reset nor installing the second recovery img worked because of the encryption miui puts on the phone. So i flashed twrp, wiped memory, flashed first orange fox img and from then installed the second img (as a zip). until here everything worked, orange fox told me that he's going to reboot to new recovery -- and i got stuck on the boot logo again. :c
Click to expand...
Click to collapse
Did you flash the firmware? https://github.com/XiaomiFirmwareUpdater/firmware_xiaomi_ysl/releases/tag/stable-16.03.2020
Other thing you could try is flash the other .img files from https://files.orangefox.download/OrangeFox-Beta/ysl/ and the flash in there the same .zip file you did as before.

celephrn said:
Did you flash the firmware? https://github.com/XiaomiFirmwareUpdater/firmware_xiaomi_ysl/releases/tag/stable-16.03.2020
Other thing you could try is flash the other .img files from https://files.orangefox.download/OrangeFox-Beta/ysl/ and the flash in there the same .zip file you did as before.
Click to expand...
Click to collapse
im currently on MIUI V.10.3.1.0.OEFMIXM | Stable 654M, is it important to flash newer firmware?

flying_shitnugget said:
im currently on MIUI V.10.3.1.0.OEFMIXM | Stable 654M, is it important to flash newer firmware?
Click to expand...
Click to collapse
Could solve the issue, I'd give it a shot!

celephrn said:
Could solve the issue, I'd give it a shot!
Click to expand...
Click to collapse
i suppose you flash it using MiFlash right? If so, i have a problem with flashing new roms using it because my Mi account isnt allowed to do that, i unlocked the bootloader using a tool (dont know if this has something to do with the custom rom problem)

flying_shitnugget said:
i suppose you flash it using MiFlash right? If so, i have a problem with flashing new roms using it because my Mi account isnt allowed to do that, i unlocked the bootloader using a tool (dont know if this has something to do with the custom rom problem)
Click to expand...
Click to collapse
As long as the bootloader is unlocked it should be fine. And no, you should flash the firmware just as you would flash the rom, i. e. from OrangeFox Recovery.

celephrn said:
As long as the bootloader is unlocked it should be fine. And no, you should flash the firmware just as you would flash the rom, i. e. from OrangeFox Recovery.
Click to expand...
Click to collapse
so i flashed the firmware as you said, now neither orangefox or twrp throw me the error "unable to locate storage device", i cant mount the storage to the pc and cant copy the custom rom stuff as well

celephrn said:
As long as the bootloader is unlocked it should be fine. And no, you should flash the firmware just as you would flash the rom, i. e. from OrangeFox Recovery.
Click to expand...
Click to collapse
UPDATE: i finally ****ing did it. So here are the steps that i took (incase anyone has to go through this **** as well)
1. flash MIUI on mobile device using MiFlash (at least i did this by shorting 2 pins on the back)
2. (VERY IMPORTANT!!!) instantly boot to fastboot using Power button + Volume down. this has to be before android starts setting up the phone
3. flash recovery with the image that celephrn provided in this thread
4.boot to recovery by holding Volume up + Power button
5. install the miui update that celephrn provided in this thread
6. reboot to recovery
7. install orange recovery zip that celephrn provided in this thread (phone reboots to recovery)
8. now you can reboot to system (Do NOT (!!!) set the phone up, just let it work its things until you see the MIUI setup screen)
9. Now, finally you can dirty flash your custom rom (and GApps)
10. after flashing the new rom android will throw you alot of errors so you will have to wipe Dalvik/Cache, System, Data and Internal Storage.
11. now you can flash your Rom clean and you're good to go
(huge thanks to celephrn, helped me out after me struggling for a few good weeks with this damn phone)

Baim alif said:
use this recovery
https://files.orangefox.download/OrangeFox-Stable/ysl/OrangeFox-R10.0-1-Stable-ysl.zip
Click to expand...
Click to collapse
bro please help me i have the same issue error 255 on 3.2.1-0 ysl twrp.please help

Farrellclay said:
bro please help me i have the same issue error 255 on 3.2.1-0 ysl twrp.please help
Click to expand...
Click to collapse
so far, what have you done

Unable to boot to twrp after installing evolution x(30/04)

I recently used twrp to flash custom rom, after which I was able to boot into the custom rom, but unable to get back into twrp since twrp keeps flickering on boot, however this doesnt affect my main rom. Just that I'm unable to update my rom directly.
What I've tried so far-
i) fastboot boot recovery and boot recovery to no avail, still boots to flickering twrp.
ii) installing stock miui, unlocking, again flashing twrp, and installing latest version of evolution x(14/05), after which I wasn't able to boot into the rom itself.
Could someone help me with solving this issue, please do explain in lamen's terms, I'm still a noob when it comes to this domain.
Thank you,

adithyanayak31 said:
I recently used twrp to flash custom rom, after which I was able to boot into the custom rom, but unable to get back into twrp since twrp keeps flickering on boot, however this doesnt affect my main rom. Just that I'm unable to update my rom directly.
What I've tried so far-
i) fastboot boot recovery and boot recovery to no avail, still boots to flickering twrp.
ii) installing stock miui, unlocking, again flashing twrp, and installing latest version of evolution x(14/05), after which I wasn't able to boot into the rom itself.
Could someone help me with solving this issue, please do explain in lamen's terms, I'm still a noob when it comes to this domain.
Thank you,
Click to expand...
Click to collapse
1. Download the proper flashable ZIP for your device
3. Reboot to Recovery
4. Flash the ROM
5. Format Data
6. Reboot to System

NOSS8 said:
1. Download the proper flashable ZIP for your device
3. Reboot to Recovery
4. Flash the ROM
5. Format Data
6. Reboot to System
Click to expand...
Click to collapse
i am unable to reboot to recovery due to flickering twrp:/. Please go through my query again.

adithyanayak31 said:
i am unable to reboot to recovery due to flickering twrp:/. Please go through my query again.
Click to expand...
Click to collapse
What is recovery?
What is Twrp?
When you understand that you may be able to try flashing roms.
And above all, ask your question about the thread of the rom concerned.

Presently, no TWRP versions support Android 12 for Pocco X2, so you have to wait

sahoo56 said:
Presently, no TWRP versions support Android 12 for Pocco X2, so you have to wait
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/...ion-x-snow-6-4-27-05-22.4180611/post-86807013
or
https://sourceforge.net/projects/evolution-x/files/phoenix/recovery/