I have a Xperia S running cm 12.1 with unlocked bootloaders TWRP installed and i tried to partition my SD card [http://forum.xda-developers.com/showthread.php?t=2584759] but clearly something went wrong and now the phone wont boot. I made a lot of research and tried everything but all the guides require to be able to boot into flashmode . My phone is dead the only sign of life is a red led when its charging which after some hours of charge will shut off. When the light is off and the phone connected on PC, the PC can recognize the device on unspecified devices (QHSUSB_DLOAD). i have installed all the needed drivers from Sony, google drivers from sdk, and adb drivers(adb wont see the device and i tried everything to do so, but nothing seem to work). I got a market for android on my pc called mobogenie that when i connect the phone it detects that a phone is connected but wont see what phone.The hardware reset buttons work but its useless in the current position. Concluding, the phone is bricked and wont open in fastboot-flashboot-bootloader-TWRP, its recognized as a device but not as "Xperia s" i got all the drivers and i want to flash the original firmware (already downloaded) to fix it. A possible problem is that the partition table is destroyed and after the flash it will hopefully be restored. The problem is not on the hardware but on software. I tried to trigger the download mode with the Samsung way (USB jig, 300k ohm ) but nothing happened as expected. Every solution i found required flash mode which is not accessible at the moment and i tried lots of things to go into fastboot(ever the rubber band trick,remove the battery etc). PLEASE help i dont know what to do, please help me flash it (i already got flashtool, Emma) or anohter solution. Thanks for the help in advance. (its my first thread in the forum, i hope to post it on the right section, i posted it here because i need the assistance of the developers i guess)
Hi,
You've asked in the correct section: http://forum.xda-developers.com/xperia-s/help/how-to-unbrick-xperia-s-lt26i-tried-t3265523/
so I'll close this thread.
So i had My T-Mobile GS6 Rooted
this is the **** up
I was going to factory reset my phone & i accidentally deleted my OS. i had tried to use Odin to re install the rom i had but my phone was never getting detected by any computer, i had tried to use adb sideloader to try & install it thru there but it wasn't working& also bought a OTG cable to try & install the rom from there but it wasn't able to detect it . So i thought it was my charging port because i had lost my fast charging capability before i had tried to reset my phone. I had twrp installed but my dumb ass did something that now im not able to get into twrp. Every time i try to power on my phone it loads with a white screen after a couple of minutes it shuts off. I can't get into twrp but can still get into download mode.
Odin Mode
Product Name: SM-G920T
Current Binary: Custom
System Status: Custom
FRP Lock: Off
Secure Download: Enabled
Knox Warranty Void: 1 (0X0301)
RP SWREV: B:2 K:2 S:2
What I Was Running
XtreStoLite-2.0-Odex-Pure-ROM-Final-XXU2BOFJ
XtreStoLite_S6_Odexed_Pure_Aroma_Add-on_Package_XXU2BOFJ_v.2.0
S6_UniKernel_v8-0002-TWRP
BOGG_Alliance_Framework_RLv3_1
I replaced the charging port on it today so let me know what i can do to try to fix my phone I wouldn't mind going back to stock or just let me know if its bricked
Hello Dear ,
U tried all ways & none of them worked , Emmmm did tried to used another laptop or pc ? & if u still by any ways booted to twrp do a full wipe including everything only then connect ur otg & try it it should connect ok , & try to used latest update of twrp ok ..
Thank You ,
thereassaad said:
Hello Dear ,
U tried all ways & none of them worked , Emmmm did tried to used another laptop or pc ? & if u still by any ways booted to twrp do a full wipe including everything only then connect ur otg & try it it should connect ok , & try to used latest update of twrp ok ..
Thank You ,
Click to expand...
Click to collapse
the thing is that i had twrp installed but my phone was not being recognized by any pc, i tried 2 different ones.
i downloaded the usb driver but odin would still not recognize my phone to flash it to stock
so i had tried to use adb sideloader to try & get a rom to have an OS back to be able to boot the phone but that never worked as well
when i was in twrp i saw that in the "mount" section there was an option for the OTG-USB
but that never did anything
I was still in twrp trying to figure out how to use the OTG to install the zip's into my phone when i went into advanced & I hit Fix Permissions.
i accidentally rebooted my phone & from then on i wasn't able to get into twrp, i ordered a usb charging port & waited for it for about 3 days (while waiting for the part i didn't use the phone)
Got the part today & changed the usb port but as soon as i connected the phone to the charger in a wall outlet or the pc's usb port the screen goes white after about 2 minutes it just shuts off
cant go into recovery but can go into Odin mode but even when i connect it to a pc it doesn't get recognize
Weird mate , anyway try to used other usb cable like changing it to many from ur friends etc ok if still not recognised to ur pc then sorry we can't do anything unless u did everything so if ur phone not recognised to any pc then only center service they can do it by installing os by box etc ok
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Anyone? Still locked out of my phone. :crying:
Reboot normaly > go to settings > developer setting > oem unlock check yes
#gggirlgeek
Reboot normaly > go to settings > developer setting > oem unlock > check yes
I can't get into the phone at all. It is FRP (Google) locked because I did a factory reset from recovery. I can only manipulate it from PC or stock recovery. I have ADB, Odin and Samsung Kies on my PC if that helps.
What is the reason I am getting the ODIN error: "Complete(Write) operation failed"? Is it due to the FRP lock?
If not, would flashing the same stock firmware even help? (I have read that it's not possible to flash older firmware versions.)
Is the boot partition where the FRP status is stored? Is it possible to flash a new boot image to reset it?
I assume flashing a custom recovery would be useless? I doubt it could be done without USB debugging/ADB being enabled anyway.
One of the reason for that odin error is flashing an old build of stock ROM, your guess is right
Even if you are able to flash a stock FW via ODIN you'll still not be able to boot to your OS.
You have to login using the same google id that was previously logged in
OR you have to bypass the Google Account Login Screen.
There are varous method on youtube (i know you saw them) to bypass that screen (Side Sync method worked for me at the 10th attempt) inorder to install a 3rd party app either to
1. enable the developer option or enable OEM unlock ( to flash custom ROM or custom recovery)
OR
2. to overwrite the previous google account saved with your new account details. (THIS ONE HELPED ME)
WITH FRP LOCK ON, ODIN SHOULD NOT GIVE YOU ERROR ONLY IF YOU ARE FLASHING STOCK ROM. BUT STILL YOU WILL BE LOCKED WITH GOOGLE ACCOUNT LOGIN SCREEN BECAUSE OF FRP LOCK ON AND STOCK ROM
FRP info. is saved in Sboot. Flashing a new sboot works only for devices those were never upgraded to Android 6. For J7 2015 that was upgraded to android 6, flashing Sboot bricks the phone as said by a cell phone repair agent
Regards,
Sid
@saddam.khan999 : Thank you so much for replying. This is helpful. :highfive:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Tried different USB ports, and even different PC's to get it to pop up on the phone. Tried old usb drivers too. Sidesync never senses it, and My Computer only show MTP folder that won't accept any file pasted to it.
You did this with Android 6.0.1 October 2016 update? They fix more holes every time.
Also, can you give me the link to the unlock tutorial you used with Sidesync? Just want to compare my method.
Hi,
gggirlgeek said:
This is helpful. :highfive:
Click to expand...
Click to collapse
How grateful I am to read the above line! Thanks :good:
gggirlgeek said:
You did this with Android 6.0.1 October 2016 update?
Click to expand...
Click to collapse
Yes on Android 6.0.1 but i dont remember the build date.
gggirlgeek said:
Also, can you give me the link to the unlock tutorial you used with Sidesync?
Click to expand...
Click to collapse
I tired two different tutorials of SideSync to crack it. Once I reach home in the next 10 hours from now. I'll search on youtube and give u the links. Right now I cannot remember it.
gggirlgeek said:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Click to expand...
Click to collapse
I followed below step to fix popup issue
1. Uninstall all samsung apps like, Kies, SmartSwitch, SideSync everything.
2. Uninstall Samsung USB drivers
3. Install SmartSwicth (to get best drivers)
4. Now install SideSync (latest)
5. Open SideSync and check for OTA updates in your PC (update it if available)
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
gggirlgeek said:
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
Click to expand...
Click to collapse
@gsmDabbler this guy says he/she can solve FRP issue for 5$ on skype. I dont know if he's fake or real. Best of luck
1. At welcome screen push next.
2. Connect to wifi and push next.
3. Accept terms and conditions and push next
4. Attempt to sign in to your google account.
5. On loopback to sign in page, push back intel you see the welcome screen again.
6. Push emergency dialer.
7. Dial 112
8. Put in on speaker and when the disbatcher askes what is your emergency, quickly swipe where the speaker option is to your left and click on email.
9. Ask the disbatcher for the number for non-emergency. (EXTREAMLY IMPORTANT TO NOT SKIP THIS STEP)
10. Sign into your email.
11. Compose a new message.
12. On another device download drive.google.com/file/d/0B3quVdCaxqLfaG9VY2xjd3hhWmM/view?usp=drivesdk[/url]
13. Move this file to a microsd card, and put it into the j7.
14. Push attach
15. Locate your sdcard and select es file explorer.
16. Once attached to the email, click on the box inside the email that says es file explorer. If redirected to security setting check the box that says "Unknown Sources".
17. If then redirected to install screen for es file explorer, install app and skip the next step.
18. Push back intel your on the screen with your new composed email with attachment, and once again click on es file explorer, and then install...
19. After install, restart your phone.
20. On welcome screen, plug your j7 into a power source.
21. Toggle your power button off, and then back on.
22. Click on the far right last bubble.
23. On home screen of es file explorer, take the sdcard out of the j7 and put back into the extra device you downloaded es file explorer to, and download these 2 files.
drive.google.com/file/d/0B3quVdCaxqLfNVFvMHlOWnNnY2M/view?usp=drivesdk[/url]
&
drive.google.com/file/d/0B3quVdCaxqLfc0gyRTBTNGNXOTA/view?usp=drivesdk[/url]
24. Copy these files to your microsd card from earlier, and put back into your j7.
------------> continued to next post of mine!
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip"]J700TUVU2APJ3_J700TTMB2APJ3_TMB[/URL].tar.md5
Where I got firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip[/URL]
Click to expand...
Click to collapse
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
?guys...no.. just Go to settings tap build 7 times go to developer options, turn on oem unlock, turn on usb debugging.ta dah.
mohitmallick17 said:
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
Click to expand...
Click to collapse
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
victhesunshine said:
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
Click to expand...
Click to collapse
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Saw a same issue please check & follow this steps if it helps you some way.
Download the latest samfirm tool available on xda.
Open the samfirm tool. Enter model and region. Tick Auto and binary nature.
Click on Check update. It will show the latest firmware available on samsung server.
Then click on download. It will download four file full firmware. Then flash it through odin.
You need a strong internet connection to download the file.
fullofhell said:
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
Click to expand...
Click to collapse
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
hightech316 said:
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
Click to expand...
Click to collapse
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
fullofhell said:
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
Click to expand...
Click to collapse
Thanks.
Drivers are installed.
Just cannot move from the google sign in.
There is a guide that shows how to use a USB drive with a shortcut apk on it , hooked up via OTG and is able to open settings. Although that did not work for me as well...
Maybe N version is different than MM ?
Almost the same problem here.....but in my j700f, I can't boot to recovery at all...can't flash stock firmware also due frp locked
Hi everyone, I ran into a serious problem today with my S6 G920F. I was running stock android 7 with Magisk and TWRP installed, I flashed the firmware using Flashfire from the Google Play store.
This morning the phone decided it would stop charging, a problem I faced with Android M. Anyway I reflashed the firmware package but this time i chose NOT to select the options to inject supersu and save my custom recovery, thinking that I could get it back to stock and re root it from there.
The phone previously would not boot if either Magisk or SuperSu was not installed (after i rooted it), it would just endlessly loop. Unfortunately this was the case after i flashed the firmware .
I assumed it would be a quick fix as I could just use Odin to flash the stock firmware . Unfortunately I was wrong again: my computer gives me an error message "USB Device Not Recognized" no matter how many times I uninstall and reinstall the Samsung Driver, Odin wont detect the phone either. Even Smart Switch is at a loss. The phone is currently plugged into my PC and is charging normally, I CAN boot into stock recovery and download modes.
SOMEBODY PLEASE HELP!! :crying::crying::crying:
Seems very obvious now but I found the solution I found the original cable that came with the phone; plugged it into the PC and just like that the computer registered that it was a Samsung devices and started installing drivers right away, seems like the P8 Lite cable I was using isnt a data cable?
I was able to flash TWRP using Odin and flashed Magisk using TWRP. All is well
Hei guys, I'm having an issue with my S6. I tried to root it, using CF-Autoroot, but i had 7.0.1 and it didn't worked. Then I thought, how about a downgrade to a 6.0.1, this should work. However, I forgot to check the "OEM unlock" and the only option I had on was USB debugging. What I tried until now :
-adb doesn't see my device, i tried 3 types of drivers and 2 USB's
-ODIN sees the device, but it fails to write every boot image
-recovery mode is gone, I haven't flashed anything else
- SmartSwitch /Kies throws an invalid IMEI, even though I'm getting that from the list of devices added to my Google account
Only thing that's left is the Download mode. I'm a newb when it comes to flashing devices, don't be harsh on me Thanks in advance for the people helping!
conclusion1 said:
Hei guys, I'm having an issue with my S6. I tried to root it, using CF-Autoroot, but i had 7.0.1 and it didn't worked. Then I thought, how about a downgrade to a 6.0.1, this should work. However, I forgot to check the "OEM unlock" and the only option I had on was USB debugging. What I tried until now :
-adb doesn't see my device, i tried 3 types of drivers and 2 USB's
-ODIN sees the device, but it fails to write every boot image
-recovery mode is gone, I haven't flashed anything else
- SmartSwitch /Kies throws an invalid IMEI, even though I'm getting that from the list of devices added to my Google account
Only thing that's left is the Download mode. I'm a newb when it comes to flashing devices, don't be harsh on me Thanks in ad
search for official firmware for your device. then use odin to flash file.
Click to expand...
Click to collapse
I tried to flash an official image but 6.0.1 which failed after removing boot.img. I'll try flashing 7.0.1. thanks
L.E : This was resolved ,please close.