Related
Previously, I've talked about how I bricked my G920T by using an apk to try to root my phone.
Then I tried to do a factory reset with the stock recovery but it wouldn't even go into the stock recovery. So I flashed TWRP and wiped the whole phone including the system partition.
Then I tried to flash a stock 6.0.1 firmware to the phone but doing so did not improve the situation as my phone still won't boot. Even worse, when I power my phone, all I see is the blue LED indicator, no Samsung logo, nothing.
Then I tried to flash a custom ROM like XtreStoLite but that didn't fix anything either.
When I use TWRP or the stock recovery, the error "failed to mount /efs (invalid argument)" comes up on the log. I tried using the ADB method to fix it but my phone would not get recognized by ADB probably because USB debugging isn't on by default.
I cannot shut down the phone without having it charged to a power source then holding down PWR+DOWN VOLUME+HOME until the screen shuts off.
When I enter download mode, I don't see the warning screen, I enter the download mode directly.
It will warm you when you enter download. Or use TWRP and reboot into Download.Once in download flash the ROM using Odin. Get the latest one from SamFirm.
P.S. Next time root using CF Auto Root
yasteellutch said:
It will warm you when you enter download. Or use TWRP and reboot into Download.Once in download flash the ROM using Odin. Get the latest one from SamFirm.
P.S. Next time root using CF Auto Root
Click to expand...
Click to collapse
It doesn't warn me when I enter download mode, that's one of the problems.
I tried flashing the official ROM using ODIN, it still won't boot because of the efs error.
1) Download the latest SmartSwitch
2) Click on more -> Emergency software recovery and initialization
3) Go into Device initialization, enter your model name, search for it and proceed as advised by the assistant
That should fix everything, otherwise:
1) Download the latest official firmware for your model, the 4-File (or 3-File) Version
2) Use latest ODIN, check repartition in options
3) Select all the files and flash it
If EFS or DRK is corrupted, flashing roms, custom or not won`t help, it can be fixed via repair box maybe (Octoplus/Z3X)
Try to flash CF auto root for your model, if it still won`t boot, then find someone with a box to try to help you remotely or not.
But Smart Switch emergency initialization with phone sn would be the first thing I would try.
Orginator said:
1) Download the latest SmartSwitch
2) Click on more -> Emergency software recovery and initialization
3) Go into Device initialization, enter your model name, search for it and proceed as advised by the assistant
That should fix everything, otherwise:
1) Download the latest official firmware for your model, the 4-File (or 3-File) Version
2) Use latest ODIN, check repartition in options
3) Select all the files and flash it
Click to expand...
Click to collapse
Which mode should I be in when using SmartSwitch? No devices are shown when I have it plugged in during the bootup, and is so too in download mode but shows a not supported message.
brenner650 said:
If EFS or DRK is corrupted, flashing roms, custom or not won`t help, it can be fixed via repair box maybe (Octoplus/Z3X)
Try to flash CF auto root for your model, if it still won`t boot, then find someone with a box to try to help you remotely or not.
But Smart Switch emergency initialization with phone sn would be the first thing I would try.
Click to expand...
Click to collapse
How can someone with a box help me remotely?
zheyizhu said:
Which mode should I be in when using SmartSwitch? No devices are shown when I have it plugged in during the bootup, and is so too in download mode but shows a not supported message.
Click to expand...
Click to collapse
Download mode offcourse. Nevermind the not supported message.
Follow instructions from link below, I made it for such occasions:
http://forum.xda-developers.com/galaxy-s6/help/how-to-smart-switch-emergency-t3383448
zheyizhu said:
How can someone with a box help me remotely?
Click to expand...
Click to collapse
Well if you know someone who have a box, it doesn`t have to be remotely.
If not, it is possible to fix it remotely, with help of usb hub (FlexiHub or similar), tunneling (TeamViewer or similar) and box software (you connect phone to your computer, the other guy connects box to his computer, both of you are connected through a gateway to a wonderfull thing called internet, and everybody is happy ) .
Same as on site, just with few more things in between the phone, and the box.
brenner650 said:
Download mode offcourse. Nevermind the not supported message.
Follow instructions from link below, I made it for such occasions:
http://forum.xda-developers.com/galaxy-s6/help/how-to-smart-switch-emergency-t3383448
Well if you know someone who have a box, it doesn`t have to be remotely.
If not, it is possible to fix it remotely, with help of usb hub (FlexiHub or similar), tunneling (TeamViewer or similar) and box software (you connect phone to your computer, the other guy connects box to his computer, both of you are connected through a gateway to a wonderfull thing called internet, and everybody is happy ) .
Same as on site, just with few more things in between the phone, and the box.
Click to expand...
Click to collapse
The S/N sticker on the back of the phone is long gone, is there any other way I can find it besides from going into settings because I can't do that?
EDIT: I am able to borrow a friend's serial and got the firmware installed.
The Samsung boot logo is back now, however, the device still won't boot. The efs error is still there but the download mode warning sign came back.
EDIT #2: Okay, I flashed TWRP now and ADB is working once again. Can I utilize this to fix the efs error?
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Anyone? Still locked out of my phone. :crying:
Reboot normaly > go to settings > developer setting > oem unlock check yes
#gggirlgeek
Reboot normaly > go to settings > developer setting > oem unlock > check yes
I can't get into the phone at all. It is FRP (Google) locked because I did a factory reset from recovery. I can only manipulate it from PC or stock recovery. I have ADB, Odin and Samsung Kies on my PC if that helps.
What is the reason I am getting the ODIN error: "Complete(Write) operation failed"? Is it due to the FRP lock?
If not, would flashing the same stock firmware even help? (I have read that it's not possible to flash older firmware versions.)
Is the boot partition where the FRP status is stored? Is it possible to flash a new boot image to reset it?
I assume flashing a custom recovery would be useless? I doubt it could be done without USB debugging/ADB being enabled anyway.
One of the reason for that odin error is flashing an old build of stock ROM, your guess is right
Even if you are able to flash a stock FW via ODIN you'll still not be able to boot to your OS.
You have to login using the same google id that was previously logged in
OR you have to bypass the Google Account Login Screen.
There are varous method on youtube (i know you saw them) to bypass that screen (Side Sync method worked for me at the 10th attempt) inorder to install a 3rd party app either to
1. enable the developer option or enable OEM unlock ( to flash custom ROM or custom recovery)
OR
2. to overwrite the previous google account saved with your new account details. (THIS ONE HELPED ME)
WITH FRP LOCK ON, ODIN SHOULD NOT GIVE YOU ERROR ONLY IF YOU ARE FLASHING STOCK ROM. BUT STILL YOU WILL BE LOCKED WITH GOOGLE ACCOUNT LOGIN SCREEN BECAUSE OF FRP LOCK ON AND STOCK ROM
FRP info. is saved in Sboot. Flashing a new sboot works only for devices those were never upgraded to Android 6. For J7 2015 that was upgraded to android 6, flashing Sboot bricks the phone as said by a cell phone repair agent
Regards,
Sid
@saddam.khan999 : Thank you so much for replying. This is helpful. :highfive:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Tried different USB ports, and even different PC's to get it to pop up on the phone. Tried old usb drivers too. Sidesync never senses it, and My Computer only show MTP folder that won't accept any file pasted to it.
You did this with Android 6.0.1 October 2016 update? They fix more holes every time.
Also, can you give me the link to the unlock tutorial you used with Sidesync? Just want to compare my method.
Hi,
gggirlgeek said:
This is helpful. :highfive:
Click to expand...
Click to collapse
How grateful I am to read the above line! Thanks :good:
gggirlgeek said:
You did this with Android 6.0.1 October 2016 update?
Click to expand...
Click to collapse
Yes on Android 6.0.1 but i dont remember the build date.
gggirlgeek said:
Also, can you give me the link to the unlock tutorial you used with Sidesync?
Click to expand...
Click to collapse
I tired two different tutorials of SideSync to crack it. Once I reach home in the next 10 hours from now. I'll search on youtube and give u the links. Right now I cannot remember it.
gggirlgeek said:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Click to expand...
Click to collapse
I followed below step to fix popup issue
1. Uninstall all samsung apps like, Kies, SmartSwitch, SideSync everything.
2. Uninstall Samsung USB drivers
3. Install SmartSwicth (to get best drivers)
4. Now install SideSync (latest)
5. Open SideSync and check for OTA updates in your PC (update it if available)
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
gggirlgeek said:
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
Click to expand...
Click to collapse
@gsmDabbler this guy says he/she can solve FRP issue for 5$ on skype. I dont know if he's fake or real. Best of luck
1. At welcome screen push next.
2. Connect to wifi and push next.
3. Accept terms and conditions and push next
4. Attempt to sign in to your google account.
5. On loopback to sign in page, push back intel you see the welcome screen again.
6. Push emergency dialer.
7. Dial 112
8. Put in on speaker and when the disbatcher askes what is your emergency, quickly swipe where the speaker option is to your left and click on email.
9. Ask the disbatcher for the number for non-emergency. (EXTREAMLY IMPORTANT TO NOT SKIP THIS STEP)
10. Sign into your email.
11. Compose a new message.
12. On another device download drive.google.com/file/d/0B3quVdCaxqLfaG9VY2xjd3hhWmM/view?usp=drivesdk[/url]
13. Move this file to a microsd card, and put it into the j7.
14. Push attach
15. Locate your sdcard and select es file explorer.
16. Once attached to the email, click on the box inside the email that says es file explorer. If redirected to security setting check the box that says "Unknown Sources".
17. If then redirected to install screen for es file explorer, install app and skip the next step.
18. Push back intel your on the screen with your new composed email with attachment, and once again click on es file explorer, and then install...
19. After install, restart your phone.
20. On welcome screen, plug your j7 into a power source.
21. Toggle your power button off, and then back on.
22. Click on the far right last bubble.
23. On home screen of es file explorer, take the sdcard out of the j7 and put back into the extra device you downloaded es file explorer to, and download these 2 files.
drive.google.com/file/d/0B3quVdCaxqLfNVFvMHlOWnNnY2M/view?usp=drivesdk[/url]
&
drive.google.com/file/d/0B3quVdCaxqLfc0gyRTBTNGNXOTA/view?usp=drivesdk[/url]
24. Copy these files to your microsd card from earlier, and put back into your j7.
------------> continued to next post of mine!
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip"]J700TUVU2APJ3_J700TTMB2APJ3_TMB[/URL].tar.md5
Where I got firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip[/URL]
Click to expand...
Click to collapse
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
?guys...no.. just Go to settings tap build 7 times go to developer options, turn on oem unlock, turn on usb debugging.ta dah.
mohitmallick17 said:
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
Click to expand...
Click to collapse
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
victhesunshine said:
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
Click to expand...
Click to collapse
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Saw a same issue please check & follow this steps if it helps you some way.
Download the latest samfirm tool available on xda.
Open the samfirm tool. Enter model and region. Tick Auto and binary nature.
Click on Check update. It will show the latest firmware available on samsung server.
Then click on download. It will download four file full firmware. Then flash it through odin.
You need a strong internet connection to download the file.
fullofhell said:
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
Click to expand...
Click to collapse
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
hightech316 said:
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
Click to expand...
Click to collapse
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
fullofhell said:
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
Click to expand...
Click to collapse
Thanks.
Drivers are installed.
Just cannot move from the google sign in.
There is a guide that shows how to use a USB drive with a shortcut apk on it , hooked up via OTG and is able to open settings. Although that did not work for me as well...
Maybe N version is different than MM ?
Almost the same problem here.....but in my j700f, I can't boot to recovery at all...can't flash stock firmware also due frp locked
Hey guys, I'm not particularly advanced in any sort of way with rooting devices, and I've followed all of the appropriate steps to achieve a rooted device but I'm sort of stuck.
I'm using Odin. I've tried Odin 10, 11.1, and 12.3. I turned Developer Mode on on the phone, activated USB Debugging and OEM Unlocking. I downloaded Odin and the herolte tar md5 file, added the file to the AP section in odin, checked the auto reboot and F. reset time boxes, connected my device and hit "Start." Two things happen: It either runs through the steps and end up with a red "FAIL", or it just gets stuck at Setup connection. I have tried 3 different versions of Odin, and yes, my phone OS is fully updated. So what gives? Can anyone help? I'd really appreciate it. Been trying to root my phone for hours now and no luck. I've tried to use a bunch of other help guides but Im either not advanced enough or I've had no luck. Thank you!
r3d_wheelbarr0w said:
Hey guys, I'm not particularly advanced in any sort of way with rooting devices, and I've followed all of the appropriate steps to achieve a rooted device but I'm sort of stuck.
I'm using Odin. I've tried Odin 10, 11.1, and 12.3. I turned Developer Mode on on the phone, activated USB Debugging and OEM Unlocking. I downloaded Odin and the herolte tar md5 file, added the file to the AP section in odin, checked the auto reboot and F. reset time boxes, connected my device and hit "Start." Two things happen: It either runs through the steps and end up with a red "FAIL", or it just gets stuck at Setup connection. I have tried 3 different versions of Odin, and yes, my phone OS is fully updated. So what gives? Can anyone help? I'd really appreciate it. Been trying to root my phone for hours now and no luck. I've tried to use a bunch of other help guides but Im either not advanced enough or I've had no luck. Thank you!
Click to expand...
Click to collapse
Hi mate
The odin version is not working yet for Nougat , you have to use SuperSU v2.79 SR3 zip ( flash with TWRP) Instructions in the same thread
"Custom Binary blocked by FRP lock" & Odin/PC won't recognize the device
Okay so,
My phone has been rooted for a year, I disabled OEM Unlock by accident, my antivirus was always telling me its unsecure with this feature on and to 'click here' to disable it.. I forgot how important this was to have enabled while rooted and ended disabled it and that night rebooting my device.
I get this error when trying to boot my device:
"Custom Binary blocked by FRP lock"
I have the original stock firmware, and Odin and want to reset the phone but when I plug this device in ( while in download mode ) > the windows PC doesn't recognize it (no new device sound or any change in devicemanager) and therefore odin isn't recognizing anything either - - I can grab my other 2nd-device and boot it into download mode, plug it into the same setup and boom > recognized and 'Ready!' Status in odin almost immediately so I don't think it's my PC or the cables -- I don't think 1st-device has usb debugging enabled either and I'm not sure how to proceed ...
any help is much appreciated ...
Try to use Smart Switch (from Samsung website), which also has the latest drivers, to recover your phone. (Google "how to recover with smart switch")
Alright,
Forgot to mention I tried Samsung Kies but cannot find the serial number on the device, I'll give Smart Switch a try this evening on my other PC and report back... hopefully that PC recognizes it, my tablet connects to this laptop but not the phone.. could USB debugging being disable cause this?
How close to bricked is this?
I'm such a fool!
Thanks for the feedback so far..
Hi boot tar flash odin frp lock of after stock rom flash
I went through this a few weeks back. I found my serial number (was a sticker originally on back of phone) and used smart switch to recover firmware. Then enabled developer options, oem unlock, flash TWRP thru ODIN etc etc.
So if I find the serial number, I save it .. good to know, thanks!
Hi boot tar flash odin frp lock of after stock rom flash
Click to expand...
Click to collapse
Can you elaborate just a bit?
zerotrick said:
Okay so,
My phone has been rooted for a year, I disabled OEM Unlock by accident, my antivirus was always telling me its unsecure with this feature on and to 'click here' to disable it.. I forgot how important this was to have enabled while rooted and ended disabled it and that night rebooting my device.
I get this error when trying to boot my device:
"Custom Binary blocked by FRP lock"
I have the original stock firmware, and Odin and want to reset the phone but when I plug this device in ( while in download mode ) > the windows PC doesn't recognize it (no new device sound or any change in devicemanager) and therefore odin isn't recognizing anything either - - I can grab my other 2nd-device and boot it into download mode, plug it into the same setup and boom > recognized and 'Ready!' Status in odin almost immediately so I don't think it's my PC or the cables -- I don't think 1st-device has usb debugging enabled either and I'm not sure how to proceed ...
any help is much appreciated ...
Click to expand...
Click to collapse
Hey man, im having the exact same issue with my S7 edge.
So I got my IMEI number, and with my number I went to imei. info / and I got my serial number through a warranty check through the site, you have to register to do it.
I used Smart Switch and I get an error when trying to use the emergency recovery "Model number cannot be initialized"
I'm also getting the error on my PC when trying to connect my device to odin saying that "USB device cannot recognize" and with that I cannot flash the stock firmware on the device.
So if you have gotten any solution to the FRP lock please let me know.
Serial number is engraved on back cover next to the imei number -,- @samuraichick0n about "Model number cannot be initialized" try to write it in diffrent forms eg. G935f or SM-G935f uppercase or lowercase.
Domino5 said:
Serial number is engraved on back cover next to the imei number -,- @samuraichick0n about "Model number cannot be initialized" try to write it in diffrent forms eg. G935f or SM-G935f uppercase or lowercase.
Click to expand...
Click to collapse
Thank you for the response. I will give this a go when I get home later today.
samuraichick0n said:
Thank you for the response. I will give this a go when I get home later today.
Click to expand...
Click to collapse
If smartswitch doesn't work you can download latest firmware for you model number and flash using odin, should solve your issue very quick
dusterphil said:
If smartswitch doesn't work you can download latest firmware for you model number and flash using odin, should solve your issue very quick
Click to expand...
Click to collapse
PC doesnt want to recognize my device, so Odin doesn't pick it up.
Try it with other usb cable. What is given together with the charger is incongruent, it happened to me, the same problem. (galaxy s6, s7)
And you need the newest odin. Excuse me my crappy English.
feri1969 said:
Try it with other usb cable. What is given together with the charger is incongruent, it happened to me, the same problem. (galaxy s6, s7)
And you need the newest odin. Excuse me my crappy English.
Click to expand...
Click to collapse
I've tried everything, and I still cant get the PC to pickup the phone to flash with Odin.
samuraichick0n said:
I've tried everything, and I still cant get the PC to pickup the phone to flash with Odin.
Click to expand...
Click to collapse
Tried a different PC?
*Detection* said:
Tried a different PC?
Click to expand...
Click to collapse
Yes, I've tried a different PC - "USB Device Malfunctioned /Device cannot be recognized"
Also a PSA: Smart Switch removed the recovery option for phones, you are ONLY able to get a recovery with the code from a previous backup.
samuraichick0n said:
Yes, I've tried a different PC - "USB Device Malfunctioned /Device cannot be recognized"
Also a PSA: Smart Switch removed the recovery option for phones, you are ONLY able to get a recovery with the code from a previous backup.
Click to expand...
Click to collapse
Hardware fault with the phone then
Need same kind of help
samuraichick0n said:
Yes, I've tried a different PC - "USB Device Malfunctioned /Device cannot be recognized"
Also a PSA: Smart Switch removed the recovery option for phones, you are ONLY able to get a recovery with the code from a previous backup.
Click to expand...
Click to collapse
Hi just wanted to no did you get it fixed and if so how I can’t find help anywhere. Thanks
ladyhypa said:
Hi just wanted to no did you get it fixed and if so how I can’t find help anywhere. Thanks
Click to expand...
Click to collapse
Hello, after exhausting all options I had to take the device to Samsung themselves - eventually they had to replace the motherboard on the phone to fix it.
So check if your phone is under warranty and take it in.
I fixed this when I first rooted by flashing the stock bootloader, firmware etc everything through odin
Thanks
samuraichick0n said:
Hello, after exhausting all options I had to take the device to Samsung themselves - eventually they had to replace the motherboard on the phone to fix it.
So check if your phone is under warranty and take it in.
Click to expand...
Click to collapse
Ok seems like what most people are saying but unfortunately mine is not under warranty but thanks for your reply anyway.
Hello everyone,
so my phone is soft-bricked after failure attempt to flash combination files in order to fix the csc.
I follow this thread, but the problem actually has nothing with that.
I used the latest patched odin V3.13.1, with a combination file named COMBINATION_FAC_FA80_G965USQU3ARG2.tar, and the proccess failed at flashing the system, and now i'm stuck; unable to flash other firmwares.
Before that, the phone was working perfectly after I've flashed a G965U1 firmware on it, in order to get rid of the bloatware of the original branded G965U (I don't live in the US).
Also, it successfully OTA updated to the latest G965U1UEU3ARK5 Firmware just a few days ago.
Things that I've tried so far with no success:
*Used different usb ports, both usb 2 and usb 3; and different cables
*Using both an Intel-based PC, and an AMD-based. (I know it may sound unrelated, but thats actually what prevented me from flashing the G965U1 fmwr the first time I tried, because i was using and AMD PC)
*Reinstalling Drives, installing latest kies, installing latest samsung smart switch
*using older versions of Odin
*tried to install the original Sprint firmware (v2) G965USQS2ARF4 through odin
*tried to install the G965U1UEU3ARK5 firmware through odin
The phone is stuck in download mode. sometimes if I disconnect and reconnect it, I get an unrecognized usb device message. so I need to reboot the phone again to download mode so the pc will recognize it.
and the result is always a failure:
either due to rev check, with the original OEM firmware
during the installation at 'vendor'/'system' step, due to auth error, when trying the G965USQU3ARG2 Combination file or the G965U1UEU3ARK5 files with patched odin
or even before that step with older versions of odin.
I'm out of ideas... I hope someone here has the knowledge to help in some way, Please...
Amsiman said:
Hello everyone,
so my phone is soft-bricked after failure attempt to flash combination files in order to fix the csc.
I follow this thread, but the problem actually has nothing with that.
I used the latest patched odin V3.13.1, with a combination file named COMBINATION_FAC_FA80_G965USQU3ARG2.tar, and the proccess failed at flashing the system, and now i'm stuck; unable to flash other firmwares.
Before that, the phone was working perfectly after I've flashed a G965U1 firmware on it, in order to get rid of the bloatware of the original branded G965U (I don't live in the US).
Also, it successfully OTA updated to the latest G965U1UEU3ARK5 Firmware just a few days ago.
Things that I've tried so far with no success:
*Used different usb ports, both usb 2 and usb 3; and different cables
*Using both an Intel-based PC, and an AMD-based. (I know it may sound unrelated, but thats actually what prevented me from flashing the G965U1 fmwr the first time I tried, because i was using and AMD PC)
*Reinstalling Drives, installing latest kies, installing latest samsung smart switch
*using older versions of Odin
*tried to install the original Sprint firmware (v2) G965USQS2ARF4 through odin
*tried to install the G965U1UEU3ARK5 firmware through odin
The phone is stuck in download mode. sometimes if I disconnect and reconnect it, I get an unrecognized usb device message. so I need to reboot the phone again to download mode so the pc will recognize it.
and the result is always a failure:
either due to rev check, with the original OEM firmware
during the installation at 'vendor'/'system' step, due to auth error, when trying the G965USQU3ARG2 Combination file or the G965U1UEU3ARK5 files with patched odin
or even before that step with older versions of odin.
I'm out of ideas... I hope someone here has the knowledge to help in some way, Please...
Click to expand...
Click to collapse
Guys at imeigurus has a service. Check on them. Those guys have access to special Samsung firmware that they can manipulate Samsung's as they like. They do what others can't, they can support you remotely using teamviewer. But snap the download pic here let me see
show me your device in download mode
leonardojt said:
Guys at imeigurus has a service. Check on them. Those guys have access to special Samsung firmware that they can manipulate Samsung's as they like. They do what others can't, they can support you remotely using teamviewer. But snap the download pic here let me see
Click to expand...
Click to collapse
successnbd said:
show me your device in download mode
Click to expand...
Click to collapse
OK so that's how it looked like:
download-mode
after writing this post I realized that I haven't tried flashing an OEM rev3 firmware
so I downloaded one after finding out which one is the right file
and I tried flashing it on a completly other pc than the 2 I've already tried it on
and it worked:victory:
here's the recovery after the successful flash:
recovery