Database Info

How to flash via TWRP a stock ROM in my problematic phone

Hi everyone.
I am facing a LOT of troubles with my phone (as stated in this thread).
Anyway now I have again unlocked bootloader, installed TWRP 3.1.1, rooted but I have a strange ROM installed by a service tech shop after the phone became unusable.
The problem is that this ROM does not show an update option in settings so I am stuck at 1st march security patches.
Here attached my actual Build Prop file.
The ROM seems to be a BLN-L21C900B300 (never heard of this and not even found on Firmware Finder) and the fingerprints show a "test keys" rom:
device: HWBLN-H
Display: BLN-L21C900B300
Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys​
If I try to flash via TWRP a BLN-L21C432B360 (which was my previous stock ROM) it does not work and on TWRP appears the following:
......
write radio image
check_write_data_to_partition
write data error
E; unknown command (errno)
update_huawei_pkg_from_ota_zip: update package from zip failed
updater process ended with ERROR: 7
error installing zip file '/external_sd/update_full_BLN-L21_hw_eu_zip'​
I cannot flash the FULL zip file with the core of the ROM but I can luckily flash the data, so I could get back Radio Fm and possibility to install themes....
To make the story short: is there someone who knows what this error is? Maybe I can get a solution.
Moreover: maybe this strange "device: HWBLN-H Display: BLN-L21C900B300 Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys" is preventing me to flash?
Changing build prop file can be useful?
Thanks to all.

Diamantes said:
Hi everyone.
I am facing a LOT of troubles with my phone (as stated in this thread).
Anyway now I have again unlocked bootloader, installed TWRP 3.1.1, rooted but I have a strange ROM installed by a service tech shop after the phone became unusable.
The problem is that this ROM does not show an update option in settings so I am stuck at 1st march security patches.
Here attached my actual Build Prop file.
The ROM seems to be a BLN-L21C900B300 (never heard of this and not even found on Firmware Finder) and the fingerprints show a "test keys" rom:
device: HWBLN-H
Display: BLN-L21C900B300
Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys​
If I try to flash via TWRP a BLN-L21C432B360 (which was my previous stock ROM) it does not work and on TWRP appears the following:
......
write radio image
check_write_data_to_partition
write data error
E; unknown command (errno)
update_huawei_pkg_from_ota_zip: update package from zip failed
updater process ended with ERROR: 7
error installing zip file '/external_sd/update_full_BLN-L21_hw_eu_zip'​
I cannot flash the FULL zip file with the core of the ROM but I can luckily flash the data, so I could get back Radio Fm and possibility to install themes....
To make the story short: is there someone who knows what this error is? Maybe I can get a solution.
Moreover: maybe this strange "device: HWBLN-H Display: BLN-L21C900B300 Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys" is preventing me to flash?
Changing build prop file can be useful?
Thanks to all.
Click to expand...
Click to collapse
U should use dload method
Sent from my BLN-L22 using Tapatalk

arshilhonor6x said:
U should use dload method
Click to expand...
Click to collapse
I forgot to mention: dload not working. Always error.
That's why I think TWRP is the only solution

B300 (at least for the BLN-L24) is the first of two update packages to rollback from Nougat to MM. The first update will take you from the latest firmware to B300 and then the second update will complete the rollback to your device's stock firmware.
dload this package to complete the rollback then do a factory reset and wipe cache partition in stock recovery. After that download and update to the latest firmware and proceed to unlock BL and flash twrp and you should be good to go.

Dazed No More said:
B300 (at least for the BLN-L24) is the first of two update packages to rollback from Nougat to MM. The first update will take you from the latest firmware to B300 and then the second update will complete the rollback to your device's stock firmware.
dload this package to complete the rollback then do a factory reset and wipe cache partition in stock recovery. After that download and update to the latest firmware and proceed to unlock BL and flash twrp and you should be good to go.
Click to expand...
Click to collapse
but you mean that I have to downgrade from Nougat to MM again?
And before doing it I have to flash the stock recovery?
My phone was, we can say, flashed in some way by the tech shop to this strange version of Nougat and with the "test keys" fingertips.
With the files you provide I should "dload"?
I do not understand your post.
please explain better.
Thanks.

Diamantes said:
but you mean that I have to downgrade from Nougat to MM again? Yes
And before doing it I have to flash the stock recovery? No
My phone was, we can say, flashed in some way by the tech shop to this strange version of Nougat and with the "test keys" fingertips. Like I said they did half of the rollback process which is why you are on B300 firmware that you cant find available for download
With the files you provide I should "dload"? Yes
I do not understand your post.
please explain better.
Thanks.
Click to expand...
Click to collapse
Download the zip I linked above from Huawei website. Extract the update.app and put it in dload folder on your external SD card and force flash (power vol - vol +). It will flash all the stock images and return your phone to factory firmware android 6.0 EMUI 4.1. It might bootloop after this but booting into stock recovery (power vol +) and perform factory reset followed by wipe cache partition will get you booting. Then you can OTA update to latest firmware and root again.

Well, I will try this weekend. Now the risk to stay without phone during working days is too high
Ah, BTW, thanks for suggestion.

Dazed No More said:
Download the zip I linked above from Huawei website. Extract the update.app and put it in dload folder on your external SD card and force flash (power vol - vol +). It will flash all the stock images and return your phone to factory firmware android 6.0 EMUI 4.1. It might bootloop after this but booting into stock recovery (power vol +) and perform factory reset followed by wipe cache partition will get you booting. Then you can OTA update to latest firmware and root again.
Click to expand...
Click to collapse
Well, I changed my mind and tried anyway now. I was just too curious.
result:
Software install failed.
Incompatibility with current version.
please download the correct update package.​
As usual. Huawei sucks. Full stop.

Diamantes said:
Well, I changed my mind and tried anyway now. I was just too curious.
Click to expand...
Click to collapse
Haha I know the feeling. First time I went to rollback i jumped the gun and said screw it only to have my phone brick and no access to adb/fastboot until the next morning.
As usual. Huawei sucks. Full stop.
Click to expand...
Click to collapse
I agree 100%
Since you have nothing to lose right now just try the whole rollback process. Here is the update that the service center used to get your phone to BLN-L21C900B300. You can try flashing that again through dload or skip to trying to flash this. There are two different firmwares listed as the 2nd part of the rollback and you already said the last one I gave you failed so give this one a shot. Let me know how it works out for you:good:

Dazed No More said:
Haha I know the feeling. First time I went to rollback i jumped the gun and said screw it only to have my phone brick and no access to adb/fastboot until the next morning.
I agree 100%
Since you have nothing to lose right now just try the whole rollback process. Here is the update that the service center used to get your phone to BLN-L21C900B300. You can try flashing that again through dload or skip to trying to flash this. There are two different firmwares listed as the 2nd part of the rollback and you already said the last one I gave you failed so give this one a shot. Let me know how it works out for you:good:
Click to expand...
Click to collapse
nothing mate.
I tried, gives me always error after entering erecovery. Same as above,
Software install failed.
Incompatibility with current version.
please download the correct update package.​
Will try another method suggested in another thread.
Will keep you updated just for your curiosity...
Cheers

Diamantes said:
nothing mate.
I tried, gives me always error after entering erecovery. Same as above,
Software install failed.
Incompatibility with current version.
please download the correct update package.​
Will try another method suggested in another thread.
Will keep you updated just for your curiosity...
Cheers
Click to expand...
Click to collapse
Have you tried the Team MT huawei multitool to flash the images from the firmware? Use the Huawei update extractor tool to get the boot,cust,recovery,system and userdata.img from the firmware you tried to flash and then put them in the unbrick folder in the multi tool. Put phone in fastboot and run the Multi tool and use the unbrick option. I know your phone is not bricked but this way it will flash all 5 images in order through fastboot. You could actually try and flash the most current firmware with this method and avoid having to system update from MM to Nougat.

yes, exactly, I am trying with multitool . another bro suggested me how to do it even if with a slightly different method.
"You need flash the oeminfo via multi tool and then same firmware file for your current version via dload. It should be fixed".
WTF....never sweat so much for a phone. And never had those problems flashing samsung... and I was flashaholic

Yes, I have learned so much about this phone and the flashing/brick/unbrick process in the last 2 weeks.

Diamantes said:
yes, exactly, I am trying with multitool . another bro suggested me how to do it even if with a slightly different method.
"You need flash the oeminfo via multi tool and then same firmware file for your current version via dload. It should be fixed".
WTF....never sweat so much for a phone. And never had those problems flashing samsung... and I was flashaholic
Click to expand...
Click to collapse
Thats me i guess :silly:
---------- Post added at 08:13 AM ---------- Previous post was at 08:12 AM ----------
Dazed No More said:
Yes, I have learned so much about this phone and the flashing/brick/unbrick process in the last 2 weeks.
Click to expand...
Click to collapse
I am still learning and everytime its different result . Someitmeit works and sometimes it doesn't

Dazed No More said:
Yes, I have learned so much about this phone and the flashing/brick/unbrick process in the last 2 weeks.
Click to expand...
Click to collapse
When I go to multitool "unbrick", it asks for custom.img, but in no update.app of my firmware is present.
Moreover now I just can enter erecovery. It does not boot. I can enter fastboot only. Multitool is now not recognizing the phone. Do you know how to proceed?
I put in dload the firmware .app, but it says "software install failed"

Pheew...I managed to have again that fuc..ng C900B300.
I entered fastboot and repeated the unlock bootloader process. That way the phone got a hard reset and started over. Believe me when I say I tried all the methods I knew.
I think there is something locked somewhere in my partitions (I am not an expert of course) that prevent me to do deep modifications. Now I just can TWRP data but not the core. And again I have no update option. I think I am stuck forever at this stage with 1st march patches and nougat 7.0.
I do not think I will be ever able to have Oreo.
Amen. I am really tired to waste my time with this s**t. Next phone will be again a Samsung or One+. Full stop. Stop chinese brands.

Where are you located, Europe?

Yes

Ok bro I really hope this is it. Full firmware BLN-L21C432B151. I already downloaded it myself and checked with extractor tool it has all the images you need. Since you have fastboot back use the multi tool unbrick again and now that you have all the necessary images cross your fingers it will work.
And I agree with you about the phone. Made up my mind im giving this turd to my sister and getting the OP5T in a few weeks.

Thanks. I will do it this weekend. Today I spent 5 hours to get back my configuration after the hard reset with the apps I use for work. Cannot risk again tomorrow.
In another thread, sashank suggested to change OEM file because probably phone doesn't recognize the firmware I want to install.
It didn't work and lead me to start from scratch with the same strange build.
I will try your method but first I must study better the procedure because I don't want to mess up everything and risking to throw the phone in the garbage (where it belongs in the end...).
Thanks.

Semi bricked honor 6x bln - L24. Please read, weird problems

So I got an honor 6x that I can't do anything with. I can't flash any ROMs or firmware here's the weird part of it.
Its on some version of EMUI that I can't have the system update menu and it has a button for app twin. It says BLN-L24C567B366 as the model number. Speakers don't work. I can't play videos on it and I can't use the camera in any app.
Here's the really weird part:. If I wipe all partitions and try to flash a room it boots to the same EMUI firmware not the custom rom I can't do anything to change what the rom is. It's like it's stuck in that weird Frankenstein EMUI firmware that I don't even know how I got. I tried restoring anback up cause I formatted my data partition on accident causing it not to boot or something and the backup I restored was not the backup that I made . The backup I made was a stock backup onto an SD card. When I restore it it's rooted and has some downloaded apps on it. And a different launcher. Not what I backed up originally.
I'm at a loss here. What do I do? Ihave full access to adb to flash with fastboot and can get into twrp or stock recovery. No ROMs I flash will work. In twrp it says it was successful. Ut when I boot it doesn't boot to that room, it boots to the weird emui os I can't get rid of.
Has anyone run into this issue or know how to fix it?

The exact same thing has been happening to me. The only OS that will boot up completely is the EliteRom that I attempted on my first flash after bootloader unlocking. I'm almost at my wit's end on how to resolve the issue, as I have tried the guide to roll back to stock posted here at XDA to a tee, with three different update.app files, and each one fails on install package step at 5%.
Hopefully someone with more experience than I will come along and can help us, but I did want to let you know you are not alone with this issue. At this rate, I'll have to get a backup phone to use.

All my update.app files get stuck at 5% too. And I know honor/Huawei won't repair it cause the warranty is void or if they can they would charge you.
Honestly get the Moto G5s plus. Get the unlocked version at best buy if you're in the states. It's 239 for the 32gb/3gb. Ram model and 299 for 64gb and 4gb. Best budget phone you can get and dual cameras. The ROM support isn't as big as the honor but it is easy to unlock the bootloader and do things. My only ROM issue I've had with this was trying to update magisk the phone had to reboot to install and after that, I had a lock screen set up btw, when I went to enter the pin the screen would go black, the phone would buzz, and go back to the lock screen. And I tried restoring a backup I made but the phone wouldn't boot stuck at the boot logo before the animation.
But the stock firmware I acquired on XDA along with the steps to flash in adb every file in the stock firmware fixed it with no problems at all so at least there's an easy way to restore the stock firmware for my new phone. It's way better than the honor 6x

Seriously tho check out the Moto G5s plus. Out of the box it has Android 7.1.1 mostly stock without all of Google's bloatware. Front mounted fingerprint sensor that you can you for the home, recent apps and back button, and can lock the screen with it if you have fingerprint set up and activate the Google assistant. It also has a notification light that you need root to use. But it has this cool "always on display" type thing that shows a clock and notifications when you move the phone or get a notification. It isn't an AMOLED display tho. It's. 1920x1080p one. Ips good viewing angles. Honestly this is the best phone I've ever used. And it has a Motorola turbocharger in the box. It's really worth it

TurtlePwr82 said:
The exact same thing has been happening to me. The only OS that will boot up completely is the EliteRom that I attempted on my first flash after bootloader unlocking. I'm almost at my wit's end on how to resolve the issue, as I have tried the guide to roll back to stock posted here at XDA to a tee, with three different update.app files, and each one fails on install package step at 5%.
Hopefully someone with more experience than I will come along and can help us, but I did want to let you know you are not alone with this issue. At this rate, I'll have to get a backup phone to use.
Click to expand...
Click to collapse
i think it could be an issue with the kernel cause the eliteRom has a custom kernel in it.. i have the update.app file for the BLN-L24C567B366 ad B365 files that i can extract and give you all the images that they have and maybe try to get the stock kernel somehow that might help?

TurtlePwr82 said:
The exact same thing has been happening to me. The only OS that will boot up completely is the EliteRom that I attempted on my first flash after bootloader unlocking. I'm almost at my wit's end on how to resolve the issue, as I have tried the guide to roll back to stock posted here at XDA to a tee, with three different update.app files, and each one fails on install package step at 5%.
Hopefully someone with more experience than I will come along and can help us, but I did want to let you know you are not alone with this issue. At this rate, I'll have to get a backup phone to use.
Click to expand...
Click to collapse
Try flashing every single update version until one of them works. Once youve found one that works follow this guide: https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985

I had somewhat the same issue, I dload always had an error in 5%, try to flash B360 with dload, that did the job for me.
As for the apps that dont show like the updater(yes, its a system app and is stored in /data) flash the other zips that come with the update.zip
My procedure was:
-Wipe /system and /data
-TWRP flash alternative zips that come with update.zip
-dload B360
That should bring you back to factory stock, In case you still dont have updater and other system apps:
-unlock bootloader(again)
-install TWRP
-DO NOT WIPE ANYTHING
-TWRP flash alternative zips that come with update.zip
-dload B360

xinoxkai said:
I had somewhat the same issue, I dload always had an error in 5%, try to flash B360 with dload, that did the job for me.
As for the apps that dont show like the updater(yes, its a system app and is stored in /data) flash the other zips that come with the update.zip
My procedure was:
-Wipe /system and /data
-TWRP flash alternative zips that come with update.zip
-dload B360
That should bring you back to factory stock, In case you still dont have updater and other system apps:
-unlock bootloader(again)
-install TWRP
-DO NOT WIPE ANYTHING
-TWRP flash alternative zips that come with update.zip
-dload B360
Click to expand...
Click to collapse
I'll give that a try. When you say flash alternative zips that have update.zip do you mean "stock" firmwares off firmware finder?

xSpartacusx said:
I'll give that a try. When you say flash alternative zips that have update.zip do you mean "stock" firmwares off firmware finder?
Click to expand...
Click to collapse
Yes, firmware finder showed me 3 zips, update.zip, update_data_full_public.zip and update_full_BLN-L24_hw_usa.zip, the later 2 are the "alternative zips". Just TWRP flash them.
Also, update_full_BLN-L24_hw_usa.zip might throw an error when flashing it, don't worry, by the stage it fails in its script it already did what it was expected to do and you will not have further problems.

do i need the stock recovery flashed in order to do dload?

well i followed the first half of your guide and it successfully "updated" but my storage is encrypted

xSpartacusx said:
do i need the stock recovery flashed in order to do dload?
Click to expand...
Click to collapse
Not really, I did it when I had TWRP installed

well so far so good now to do the other part also my build number is stil B366 camera and everything works now no updater or anything like that

xSpartacusx said:
well so far so good now to do the other part also my build number is stil B366 camera and everything works now no updater or anything like that
Click to expand...
Click to collapse
Yeah, my build number never changed from B366, the only thing is that when I finished everything even though I'm in B366, EMUI stays in 5.0 and not 5.0.1 as it should be... But that is the only difference and I didn't notice any difference really

okay got the stock apps back updater is back everything is fine!! one thing i noticed.. before i started flashing roms, i had an update to EMUI 5.0.1 and i dont have an update for it anymore...?

xinoxkai said:
Yeah, my build number never changed from B366, the only thing is that when I finished everything even though I'm in B366, EMUI stays in 5.0 and not 5.0.1 as it should be... But that is the only difference and I didn't notice any difference really
Click to expand...
Click to collapse
xSpartacusx said:
okay got the stock apps back updater is back everything is fine!! one thing i noticed.. before i started flashing roms, i had an update to EMUI 5.0.1 and i dont have an update for it anymore...?
Click to expand...
Click to collapse
Maybe at this point to fix the build number that remains another even if you're in a previous build, it could be sufficient to flash through TWRP a version.img extracted from your ACTUAL build. You can extract it from the update.zip of your actual firmware with Huawei Update Extractor and then flash it as image through TWRP

RedSkull23 said:
Maybe at this point to fix the build number that remains another even if you're in a previous build, it could be sufficient to flash through TWRP a version.img extracted from your ACTUAL build. You can extract it from the update.zip of your actual firmware with Huawei Update Extractor and then flash it as image through TWRP
Click to expand...
Click to collapse
xSpartacusx said:
okay got the stock apps back updater is back everything is fine!! one thing i noticed.. before i started flashing roms, i had an update to EMUI 5.0.1 and i dont have an update for it anymore...?
Click to expand...
Click to collapse
Today I fixed that issue, it showed me that I had B366 but the security patch was on march 2017 and EMUI 5.0 instead of 5.0.1.
What I did was install B366 with the proxy method with Firmware Finder, I made it download the full package from the Huawei Updater (it was around 2.4gb) after it finished the update I had B366, EMUI 5.0.1 and november security patch so all is fine now! :victory:

xinoxkai said:
Today I fixed that issue, it showed me that I had B366 but the security patch was on march 2017 and EMUI 5.0 instead of 5.0.1.
What I did was install B366 with the proxy method with Firmware Finder, I made it download the full package from the Huawei Updater (it was around 2.4gb) after it finished the update I had B366, EMUI 5.0.1 and november security patch so all is fine now! :victory:
Click to expand...
Click to collapse
Good one dude, maybe FF proxy method could help xSpartacusx to solve his issue too!

Possible To Flash Oreo Rom Via TWRP Recovery?

I am currently on Android Nougat stock.
The bootloader has been unlocked and TWRP recovery has been installed.
I would like to update to Oreo but have been unable to do so.
This guide was followed [urlhttp://www.droid views.com/install-android-8-0-oreo-based-emui-8-0-huawei-mate-9/][/url] (but was unable to get past option 4) (I left a space after droid as the link is getting blocked, just put ********** together.)
''Double-click on the Replace_Recovery.bat file in the extracted HWOTA8 folder. This will install TWRP recovery on your device.''
I keep getting a failed notification when trying to do so. The handset was in fastboot mode but refuses to update recovery.
Am I able to update to Oreo with the old TWRP recovery & update it after? I am running the old Nougat version.
Option 7 I also got stuck on. '' Create a folder named HWOTA8 on your device’s internal storage.'' whilst connected via USB to the computer.
I am unable to view internal or external storage when the USB is connected to the computer. When viewing internal/external memory normally I can see items as normal in external SD card but the internal memory files all appear jibberish even in recovery.
What am I doing wrong? I have been unable to find any clear guides of how to update from Nougat to Oreo including flashing the rom, flashing recovery and root.
Thanks for those able to help.
PS. I'm a new Huawei Mate 9 owner and have only just received the device several hours ago which is why I'm rusty. Compared to my previous Sony Xperia XZ Premium it is much more complicated. Sony was far easier to flash recovery and flash roms via recovery.
I am having the MHA-L29 international version.

Device now bootloops after following the guide of flashing SuperSU in recovery. I did what was said and received ''error 9'' after flashing the files.
Now bootloop.
Good news at least recovery is working but unable to boot. How to I update to Oreo with updated recovery & root?

Otherwise is THIS guide safe to follow:
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656

Could not even get past option 4. ''Do oeminfo backup in twrp,you should have a folder name twrp, inside this folder there is many subfolders.
In last folder there is 2-3 files,those files should be replaced with c636 oeminfo: http://www.mediafire.com/?szws87sk7rrkqr6''
Permission denied error.

kanej2006 said:
Could not even get past option 4. ''Do oeminfo backup in twrp,you should have a folder name twrp, inside this folder there is many subfolders.
In last folder there is 2-3 files,those files should be replaced with c636 oeminfo: http://www.mediafire.com/?szws87sk7rrkqr6''
Permission denied error.
Click to expand...
Click to collapse
The guide in OP is outdated, and it only has the oreo beta builds.
Do you know what your current firmware build is?
MHA-LxxCxxx
(It should be printed on the box of your Mate 9)
Next go here http://pro-teammt.ru/firmware-database/ and enter your model and cust in the search box (Example, MHA-L29C432)
Official Oreo builds begin at B360, if you happen to be at C432 the latest is B364 (Ok, it's B365 but it seems to be a test build and was released before B364 so January patches.)
Click the 'update' link in the FullOTA-MF row, download update.zip.
Click on the 'file list' link in the FullOTA-MF row, copy link of update_data_full_public.zip and paste into a new browser tab, this downloads the zip.
Do the same with L29 or L09 hw data, depending on your version.
Next rename update_data_full_public.zip to update_data_public.zip, rename the L29/L09 hw data zip to update_all_hw.zip.
Place update.zip, update_all_hw.zip and update_data_public.zip in the HWOTA folder on your sdcard.
Download this zip: https://mega.nz/#!RaAQDLqY!pgBcA5tcy4ewvROUxei3af59hns4YtkeFPC5_WCyV6g (Note, this is only for Nougat to Nougat or Nougat to Oreo, does not work in Oreo as partitions changed and it flashes the NoCheck recovery to the correct partitions in Nougat. It will not flash correctly in Oreo)
extract and put hwota7_update.zip, MHA_RECOVERY2_NoCheck.img and MHA_RECOVERY_NoCheck.img in the HWOTA folder on your micro sd.
Put back mSD in phone and boot to TWRP, flash hwota7_update.zip and wait.
Phone should now reboot and start updating.
This is basically the HWOTA8 zip for updating Oreo or downgrading to Nougat, all props to @mankindtw.
All I did was change the partitions to flash so they match Nougat's partitions.

ante0 said:
Unless you want to rebrand to a different cust, don't follow this.
Do you know what your current firmware build is?
MHA-LxxCxxxBxxx
Click to expand...
Click to collapse
Good thing I never went ahead with that!
I'm on international MHA-L29C185B182.
Thank goodness I was able to restore Nougat as I backed up with TWRP recovery.
However, what is the easiest way to upgrade to the latest Android Oreo 8? At the moment I'm on stock 7 Nougat but am rooted with TWRP recovery.

kanej2006 said:
Good thing I never went ahead with that!
I'm on international MHA-L29C185B182.
Thank goodness I was able to restore Nougat as I backed up with TWRP recovery.
However, what is the easiest way to upgrade to the latest Android Oreo 8? At the moment I'm on stock 7 Nougat but am rooted with TWRP recovery.
Click to expand...
Click to collapse
Check my post, I edited while you posted this.
Or you can use this one, it's basically the same anyway, only difference is that you use a .bat file: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Use the same steps as I wrote above for downloading the update files as this was not the way to do it when that guide was written.

^ It seems the model I have is not found? After several attempts it is not finding my model.

kanej2006 said:
^ It seems the model I have is not found? After several attempts it is not finding my model.
Click to expand...
Click to collapse
http://pro-teammt.ru/firmware-database/?firmware_model=MHA-L29C185&firmware_page=0
Here are links you need:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2307/g1699/v120294/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...94/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_MHA-L29_hw_meafnaf.zip
Rename update_data_full_public.zip to update_data_public.zip and update_full_MHA-L29_hw_meafnaf.zip to update_all_hw.zip
There is a B371 too, but it was released before b370 so probably a test build.
That guide in OP seems to be a mixup. It uses the HWOTA8 files, which are for Oreo, so that's probably why it gave you errors.

ante0 said:
http://pro-teammt.ru/firmware-database/?firmware_model=MHA-L29C185&firmware_page=0
Here are links you need:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2307/g1699/v120294/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...94/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_MHA-L29_hw_meafnaf.zip
Rename update_data_full_public.zip to update_data_public.zip and update_full_MHA-L29_hw_meafnaf.zip to update_all_hw.zip
There is a B371 too, but it was released before b370 so probably a test build.
That guide in OP seems to be a mixup. It uses the HWOTA8 files, which are for Oreo, so that's probably why it gave you errors.
Click to expand...
Click to collapse
Thank you so much ante0 for all the information, it was very helpful. I am now downloading the above three files. Once complete I will rename them as mentioned and flash hwota7_update.zip in TWRP recovery. Will let you know shortly the outcome!

Cheers ante0, finally got my phone fully updated to Android 8 Oreo following your guide. Thank you so much! If it was not for you this would not have been possible!
The other links I was looking at were outdated as you mentioned and the instructions you provided were better. I appreciate your time to help me.
Upon booting, my EMUI version is now 8.0 and Android Version 8.0.
I will now follow this link for getting root:
https://forum.xda-developers.com/mate-9/how-to/discussion-root-mate9-oreo-emui-8-0-how-t3712495

@ ante0, I was able to get recovery and root but had to once again unlock bootloader...

kanej2006 said:
@ ante0, I was able to get recovery and root but had to once again unlock bootloader...
Click to expand...
Click to collapse
Great. I would suggest Magisk but that's up to you to decide
Bootloader getting locked is normal when updating Nougat to Nougat and Nougat to Oreo. Oreo to Oreo is stays unlocked.

ante0 said:
Great. I would suggest Magisk but that's up to you to decide
Bootloader getting locked is normal when updating Nougat to Nougat and Nougat to Oreo. Oreo to Oreo is stays unlocked.
Click to expand...
Click to collapse
I did not see any guide for Magisk, guess I missed it.
Anyway there are pros and cons for both, though I also prefer Magisk. Either way they both do the job, root access.
All is good now. I am very happy with the phone. Still not even been 24 hours since I received it yet already the bootloader has been unlocked, TWRP recovery and root. Nice :good:

Great and very helpful thread. thanks for everyone who's contributed to it. I'm trying to do the exact same thing coming from ROM Aur. Do you think I can use the same exact process is yours coming from a custom ROM? Did you have to do the boot loader unlock in order to Root? If there are no custom roms then perhaps the boot loader unlock is unnecessary? In order to install Magisk to root, what are the prerequisits? Do I need to reinstall TWRP? If so , is there a link to the correct version? Are there any other pointers that you can give me that you found out while doing this whole process? Thank you so much
kanej2006 said:
I did not see any guide for Magisk, guess I missed it.
Anyway there are pros and cons for both, though I also prefer Magisk. Either way they both do the job, root access.
All is good now. I am very happy with the phone. Still not even been 24 hours since I received it yet already the bootloader has been unlocked, TWRP recovery and root. Nice :good:
Click to expand...
Click to collapse
---------- Post added at 01:33 AM ---------- Previous post was at 01:02 AM ----------
Thanks for the guide!! Very helpful. However, Before I can even start following it, I'm running into some issues. The challenge that I'm facing is that I'm currently on a custom ROM (ROM AUR) and I do not know what my firmware build is. The box only tells me what the model number is and it's the MHA-L29. how would I find my firmware build ? The phone was purchased at bestbuy in the US.
Thanks again
ante0 said:
The guide in OP is outdated, and it only has the oreo beta builds.
Do you know what your current firmware build is?
MHA-LxxCxxx
(It should be printed on the box of your Mate 9)
Next go here http://pro-teammt.ru/firmware-database/ and enter your model and cust in the search box (Example, MHA-L29C432)
Official Oreo builds begin at B360, if you happen to be at C432 the latest is B364 (Ok, it's B365 but it seems to be a test build and was released before B364 so January patches.)
Click the 'update' link in the FullOTA-MF row, download update.zip.
Click on the 'file list' link in the FullOTA-MF row, copy link of update_data_full_public.zip and paste into a new browser tab, this downloads the zip.
Do the same with L29 or L09 hw data, depending on your version.
Next rename update_data_full_public.zip to update_data_public.zip, rename the L29/L09 hw data zip to update_all_hw.zip.
Place update.zip, update_all_hw.zip and update_data_public.zip in the HWOTA folder on your sdcard.
Download this zip: https://mega.nz/#!RaAQDLqY!pgBcA5tcy4ewvROUxei3af59hns4YtkeFPC5_WCyV6g (Note, this is only for Nougat to Nougat or Nougat to Oreo, does not work in Oreo as partitions changed and it flashes the NoCheck recovery to the correct partitions in Nougat. It will not flash correctly in Oreo)
extract and put hwota7_update.zip, MHA_RECOVERY2_NoCheck.img and MHA_RECOVERY_NoCheck.img in the HWOTA folder on your micro sd.
Put back mSD in phone and boot to TWRP, flash hwota7_update.zip and wait.
Phone should now reboot and start updating.
This is basically the HWOTA8 zip for updating Oreo or downgrading to Nougat, all props to @mankindtw.
All I did was change the partitions to flash so they match Nougat's partitions.
Click to expand...
Click to collapse

seti007 said:
Great and very helpful thread. thanks for everyone who's contributed to it. I'm trying to do the exact same thing coming from ROM Aur. Do you think I can use the same exact process is yours coming from a custom ROM? Did you have to do the boot loader unlock in order to Root? If there are no custom roms then perhaps the boot loader unlock is unnecessary? In order to install Magisk to root, what are the prerequisits? Do I need to reinstall TWRP? If so , is there a link to the correct version? Are there any other pointers that you can give me that you found out while doing this whole process? Thank you so much
---------- Post added at 01:33 AM ---------- Previous post was at 01:02 AM ----------
Thanks for the guide!! Very helpful. However, Before I can even start following it, I'm running into some issues. The challenge that I'm facing is that I'm currently on a custom ROM (ROM AUR) and I do not know what my firmware build is. The box only tells me what the model number is and it's the MHA-L29. how would I find my firmware build ? The phone was purchased at bestbuy in the US.
Thanks again
Click to expand...
Click to collapse
You can do the exact same process, however, I strongly suggest you follow the above guide from ante0. His guides are clear and upto date. Other guides were unclear and old not being upto date.
And yes, you must have an unlocked bootloader to flash a rom, however it is very easy to do. There are many guides which tell you how to do so. Simple fastboot commands when your phone is set to fastboot mode. You only need the unlock code via Huawei's website.
With regards to Magisk/SuperSU, yes, you must have a working recovery in order to flash either one. Without recovery you cannot get root access. I suggest you flash SuperSU as it is far easier than Magisk, a simple two step procedure!
What Android version are you on? Nougat or Oreo? Beware that when flashing recovery and root, it must be for the correct Android version. And of course if updating to Oreo, once again you will need to flash recovery and root made to run on Oreo to prevent issues and boot loops.
Do you not have the box that came with your device? I am guessing you have the international MHA-L29 version as I do, but you must be sure.

ante0 said:
Bootloader getting locked is normal when updating Nougat to Nougat
Click to expand...
Click to collapse
The bootloader (i.e. fastboot) is always locked (btw, is there an easy way to unlock FB Lock ?), you probably mean the 'USER Lock'. And the 'USER UnLock' is damaged only if you flash some random oeminfo files (which is a very dumb decision anyway).
This mechanism is documented in the USENIX paper i have linked in the OEMINFO thread.
---------- Post added at 12:19 PM ---------- Previous post was at 12:00 PM ----------
kanej2006 said:
Sony was far easier to flash recovery and flash roms via recovery.
Click to expand...
Click to collapse
It may be "easier", but Mate 9 is probably one of the most unbrickable smartphones that i know, because it can be recovered even if you manage to destroy 'partition table+xloader+fastboot' (the really critical parts, other partitions can be recovered without opening the phone case).

kanej2006 said:
You can do the exact same process, however, I strongly suggest you follow the above guide from ante0. His guides are clear and upto date. Other guides were unclear and old not being upto date.
And yes, you must have an unlocked bootloader to flash a rom, however it is very easy to do. There are many guides which tell you how to do so. Simple fastboot commands when your phone is set to fastboot mode. You only need the unlock code via Huawei's website.
With regards to Magisk/SuperSU, yes, you must have a working recovery in order to flash either one. Without recovery you cannot get root access. I suggest you flash SuperSU as it is far easier than Magisk, a simple two step procedure!
What Android version are you on? Nougat or Oreo? Beware that when flashing recovery and root, it must be for the correct Android version. And of course if updating to Oreo, once again you will need to flash recovery and root made to run on Oreo to prevent issues and boot loops.
Do you not have the box that came with your device? I am guessing you have the international MHA-L29 version as I do, but you must be sure.
Click to expand...
Click to collapse
Yes I intend to follow the awesome guide from ante0 (thanks for that ante). I'm on Nougat currently. After following the above method, I guess I will have a fully factory locked phone? SO, I will have to first install recovery, then root. Correct? I do have the box but it only says the model number MHA-L29. Nothing on firmware but since its a US phone bought here, I'm fairly confident that its a MHA-L29C567B183. Although when i installed ROM AUR I used the version for L29C432 and it worked. Which one would you try if you were me? Will I brick the phone if the version is incorrect? If that happens, how do i return to oreo stock from there? Do you have any links for the right Recovery and root?
Thanks and sorry for so many questions.
UPDATE-- So have an update. I was able to install oreo using the method listed above. everything seems to be working fine. however I'm getting an error 255 message while creating a backup I'm using TWRP. Thinking that my data partition needed decrypting, I deleted it and rebooted the phone. Set it up and then went back into TWRP. I'm still getting the same backup error. any ideas? The route also installed and works fine . My concern now is that I would end up with I found that cannot be backed up with TWRP. BTW. I installed TWRP 3.2.1-0 from here https://forum.xda-developers.com/mate-9/development/recovery-twrp-3-2-1-0-oreo-t3734967.
Thanks

^ 1 Thing hopefully you did not forget, before flashing the rom, you must ''wipe data'' from TWRP recovery otherwise you will get bootloop and the encryption issue. Did you wipe data from recovery prior to flashing? Encryption is removed/disabled when wiping data in recovery.
Glad you got somewhere at least. If it wasn't for the guide from Ante0, I'd still be bootlooping on Nougat.

ante0 said:
The guide in OP is outdated, and it only has the oreo beta builds.
Do you know what your current firmware build is?
MHA-LxxCxxx
(It should be printed on the box of your Mate 9)
Next go here http://pro-teammt.ru/firmware-database/ and enter your model and cust in the search box (Example, MHA-L29C432)
Official Oreo builds begin at B360, if you happen to be at C432 the latest is B364 (Ok, it's B365 but it seems to be a test build and was released before B364 so January patches.)
Click the 'update' link in the FullOTA-MF row, download update.zip.
Click on the 'file list' link in the FullOTA-MF row, copy link of update_data_full_public.zip and paste into a new browser tab, this downloads the zip.
Do the same with L29 or L09 hw data, depending on your version.
Next rename update_data_full_public.zip to update_data_public.zip, rename the L29/L09 hw data zip to update_all_hw.zip.
Place update.zip, update_all_hw.zip and update_data_public.zip in the HWOTA folder on your sdcard.
Download this zip: https://mega.nz/#!RaAQDLqY!pgBcA5tcy4ewvROUxei3af59hns4YtkeFPC5_WCyV6g (Note, this is only for Nougat to Nougat or Nougat to Oreo, does not work in Oreo as partitions changed and it flashes the NoCheck recovery to the correct partitions in Nougat. It will not flash correctly in Oreo)
extract and put hwota7_update.zip, MHA_RECOVERY2_NoCheck.img and MHA_RECOVERY_NoCheck.img in the HWOTA folder on your micro sd.
Put back mSD in phone and boot to TWRP, flash hwota7_update.zip and wait.
Phone should now reboot and start updating.
This is basically the HWOTA8 zip for updating Oreo or downgrading to Nougat, all props to @mankindtw.
All I did was change the partitions to flash so they match Nougat's partitions.
Click to expand...
Click to collapse
@ante0
can i use these commands to upgrade to O as well
the only difference in the folder should be the hwota8 and the update zips for O ?
L09C316
d if=/external_sd/HWOTA/MHA_RECOVERY_NoCheck.img of=/dev/block/sdd33
dd if=/external_sd/HWOTA/MHA_RECOVERY2_NoCheck.img of=/dev/block/sdd30
echo --update_package=/sdcard/HWOTA/update.zip > /cache/recovery/command
echo --update_package=/sdcard/HWOTA/update_data_public.zip >> /cache/recovery/command
echo --update_package=/sdcard/HWOTA/update_all_hw.zip >> /cache/recovery/command

Any possible way to unbrick my phone?

Hello, guys. I bought two of these phones. BLN-AL30 VERSION is the one that I was using for a while. I tried to unlock its bootloader and it was a complete success. I remember that my phone said BLL-L22 in its about device section and not BLN-AL30 though. I proceeded to install TWRP and rooted it, I also backed up all the partitions so I decided to go for the elite version (TWRP, for I wanted to install their room). Everything was ok. I installed the elite rom which I thought was cool and I used it for a while. Then I decided to switch into slim ROM. I had made the proper back up also and still have them files. I backed up everything because I realized the elite ROM asked for a complete wiping. The next thing I realized was that my phone wouldn't be able to install the slim rom because I had this error:
Unable to wipe vendor /vendor command not allowed.
It also happened with product and version partition. And sometimes it said unable to mount /vendor. (The same for product, version)...
Now, I can't install any other room because of that. And I have downloaded many update.app files to recover and heal my phone as stock but it seems impossible. I have bought another honor 6x and it's coming the next month because I loved this phone but also because if bricked but unrecoverable I'd like to have its parts in case of some repair needed. Is there anyway to recover it? it's so sad. I never thought elite rom would do that to my phone. I assure I followed every single step from its thread. Thanks in advance. Hope you can help.

try to formate data then go to main main screen reboot to recovery now wipe everything. if it is not working then try previous version of elite TWRP or Berlin TWRP. if nothing works then u need to do dload. but u r saying dload is also not working still u have two solutions. download oem info of another region and flash it via TWRP u can try oem info for bln-l22c675b340 https://forum.xda-developers.com/honor-6x/how-to/guide-debranding-to-india-variant-bln-t3679402 now Google for bln-l22c675b340 firmware download it then unzip update app file. now Flash oem info file in TWRP then using sd card flash update app by pressing 3 buttons. this time it will install for sure. if oem file failed to install then extract the oem file then download srk tool put both files in restore folder connect your phone in fastboot restore oem info will work for sure. there is no way to brick honor 6x lot of rescue methods available if this fails still you can use hwota8 method to upgrade oreo.

Thank I'm going to try that
Where can I find the Oreo update thing?. Thanks

evjgl said:
Where can I find the Oreo update thing?. Thanks
Click to expand...
Click to collapse
once it is ready for your model. its in beta phase in China and not released for public yet.

[Q]How to change root from phh.superuser to Magisk and upgrade firmware?

Hi Guys, I've been an active user of XDA in the past but didn't have time to follow in the last couple of years so my memory about flashing and tinkering is quite blank.
Here is my situation:
Mate 9 MHA-L29C636B158 (very old ROM)
Bootloader unlocked with paid code from dc-unlocker
Rooted with PHH's Superuser (the only root that was available for our device back in March 2017)
EMUI 5.0 and Android 7.0 (that was obvious from my Build number but I just wanted to state it again)
TWRP 3.0.2-2 is installed with system kept read-only. Internal SD seems to be encrypted
I never took any OTAs as I was afraid that they would break something
In the last month's many of my banking or financial apps have stopped working because I'm rooted so I read that Magisk would be able to circumvent this safetynet thing and would allow me to continue using these apps. Google Pay would be a nice addition also.
At this point I would like to upgrade my firmware and get rid of PHH's Superuser switching to Magisk instead
Could someone please write a detailed guide how to do that? It might be interesting for other users also that are in my same situation. I'm willing to donate a few bucks for a complete and foolproof guide.
Thanks a lot

itenos said:
Hi Guys, I've been an active user of XDA in the past but didn't have time to follow in the last couple of years so my memory about flashing and tinkering is quite blank.
Here is my situation:
Mate 9 MHA-L29C636B158 (very old ROM)
Bootloader unlocked with paid code from dc-unlocker
Rooted with PHH's Superuser (the only root that was available for our device back in March 2017)
EMUI 5.0 and Android 7.0 (that was obvious from my Build number but I just wanted to state it again)
TWRP 3.0.2-2 is installed with system kept read-only. Internal SD seems to be encrypted
I never took any OTAs as I was afraid that they would break something
In the last month's many of my banking or financial apps have stopped working because I'm rooted so I read that Magisk would be able to circumvent this safetynet thing and would allow me to continue using these apps. Google Pay would be a nice addition also.
At this point I would like to upgrade my firmware and get rid of PHH's Superuser switching to Magisk instead
Could someone please write a detailed guide how to do that? It might be interesting for other users also that are in my same situation. I'm willing to donate a few bucks for a complete and foolproof guide.
Thanks a lot
Click to expand...
Click to collapse
Do you still have the unlock code? You'll want it, as the update from EMUI 5 to EMUI 8, on every device I've got, has relocked the bootloader.
With that said:
If you want to keep your data, make a backup using Hisuite.
Download the FullOTA firmware for your current version. Extract system, boot, recovery, recovery2 (as you're on EMUI 5) and flash them either in TWRP or fastboot; that should eliminate PHH SU and TWRP, and ultimately leave the system in a clean state.
If you modified other partitions on the device using TWRP or su in general, it wouldn't be a bad idea to use a nocheck recovery or HuRupdater to flash the entire system, to leave everything in a pristine state, since there are partitions you can't flash with fastboot, even with an unlocked bootloader. The instructions for HuR can be found elsewhere on XDA, as can details about nocheck recoveries, though the latter I'd be careful with - using HWOTA7 on Oreo, for example, WILL cause a brick. You've been warned.
Start the update process - you've already been approved for OTAs and they've been offered, so they should happen automatically. When Oreo is installed, it'll automatically relock your bootloader; you can continue updating here, though if you've got a particular target you want to go to, you might want to unlock and use HuR again to flash that specific one now that you're on Oreo. (The latest firmwares can't be rolled back to Nougat.) If you have no intention of going back to Nougat, you have your unlock code, and you aren't planning to do any other modifications like rebranding, then update away, though you may want to hold off of the Pie update if offered. (Shouldn't be, yet, but it could have been approved for your device already; it changes the boot partitions yet again.)
Now that you're on Oreo and presumably unlocked again, make sure you've got the FullOTA image downloaded for that firmware to your PC. (Always a good idea, anyway.)
Magisk can be installed by:
1) Flashing TWRP with fastboot, then flashing a suitable Magisk zip
2) Using Magisk Manager to patch a boot image and flashing that.
For TWRP:
Get a copy of TWRP from the forum here. When I use one, it's the 3.2.1-0 from @Pretoriano80, you'll find it in the development section. Any 3.2.x for Oreo should work though - a Nougat TWRP will not work.
Flash TWRP to recovery_ramdisk in fastboot. Boot to TWRP, flash Magisk.
For Magisk Manager:
Extract "ramdisk" from your FullOTA firmware. Place it in internal storage on your device. Use Magisk Manager to patch the image (install / patch boot image). Transfer the patched_boot.img created by Magisk back to your PC and flash that to the "ramdisk" partition in fastboot.

Just stumbled over your reply, didn't get an email notification from XDA. Thank you so much. Let's see if I can follow your instructions.
irony_delerium said:
Do you still have the unlock code? You'll want it, as the update from EMUI 5 to EMUI 8, on every device I've got, has relocked the bootloader.
Click to expand...
Click to collapse
Yes, I still have the code
irony_delerium said:
With that said:
If you want to keep your data, make a backup using Hisuite.
Click to expand...
Click to collapse
Done
irony_delerium said:
Download the FullOTA firmware for your current version. Extract system, boot, recovery, recovery2 (as you're on EMUI 5) and flash them either in TWRP or fastboot; that should eliminate PHH SU and TWRP, and ultimately leave the system in a clean state.
Click to expand...
Click to collapse
I downloaded the FullOTA with the FirmwareFinder app on my phone and transferred it to my laptop. Extracted the update.app with WinRAR and extracted system, boot, recovery and recovery2 using the Huawei Update Extractor 0.9.9.3.
Just to make no mistake, could you please confirm the order of flashing these 4 files? And maybe the correct command to use in fastboot?
irony_delerium said:
If you modified other partitions on the device using TWRP or su in general, it wouldn't be a bad idea to use a nocheck recovery or HuRupdater to flash the entire system, to leave everything in a pristine state, since there are partitions you can't flash with fastboot, even with an unlocked bootloader. The instructions for HuR can be found elsewhere on XDA, as can details about nocheck recoveries, though the latter I'd be careful with - using HWOTA7 on Oreo, for example, WILL cause a brick. You've been warned.
Click to expand...
Click to collapse
I don't think that I modified any other partitions, at least not willingly. I even left the system in read-only state. Don't know if phh.su did something by itself?
irony_delerium said:
Start the update process - you've already been approved for OTAs and they've been offered, so they should happen automatically. When Oreo is installed, it'll automatically relock your bootloader; you can continue updating here, though if you've got a particular target you want to go to, you might want to unlock and use HuR again to flash that specific one now that you're on Oreo. (The latest firmwares can't be rolled back to Nougat.) If you have no intention of going back to Nougat, you have your unlock code, and you aren't planning to do any other modifications like rebranding, then update away, though you may want to hold off of the Pie update if offered. (Shouldn't be, yet, but it could have been approved for your device already; it changes the boot partitions yet again.)
Now that you're on Oreo and presumably unlocked again, make sure you've got the FullOTA image downloaded for that firmware to your PC. (Always a good idea, anyway.)
Magisk can be installed by:
1) Flashing TWRP with fastboot, then flashing a suitable Magisk zip
2) Using Magisk Manager to patch a boot image and flashing that.
For TWRP:
Get a copy of TWRP from the forum here. When I use one, it's the 3.2.1-0 from @Pretoriano80, you'll find it in the development section. Any 3.2.x for Oreo should work though - a Nougat TWRP will not work.
Flash TWRP to recovery_ramdisk in fastboot. Boot to TWRP, flash Magisk.
For Magisk Manager:
Extract "ramdisk" from your FullOTA firmware. Place it in internal storage on your device. Use Magisk Manager to patch the image (install / patch boot image). Transfer the patched_boot.img created by Magisk back to your PC and flash that to the "ramdisk" partition in fastboot.
Click to expand...
Click to collapse
Will continue to do the above after your kind confirmation of my last questions. Thanks again

itenos said:
I downloaded the FullOTA with the FirmwareFinder app on my phone and transferred it to my laptop. Extracted the update.app with WinRAR and extracted system, boot, recovery and recovery2 using the Huawei Update Extractor 0.9.9.3.
Just to make no mistake, could you please confirm the order of flashing these 4 files? And maybe the correct command to use in fastboot?
Click to expand...
Click to collapse
The order shouldn't be particularly relevant, just that it's safest to reflash all of them:
- boot because phhsu may have modified the boot image to add su to it
- recovery and recovery2 because you loaded TWRP. recovery2 is specified because it's used to be recommended to flash to erecovery as well as normal recovery.
- system because I'm pretty sure that's the biggest thing modified Hy phhsu, and any other system changes you may have made.
Theoretically, other modified partitions won't matter since the upgrade to 8.0 replaces most (all, I think) of them anyway, but if you have to go through update steps through EMUI 5 first before it'll give you 8, then it's safest that they aren't modified. I mentioned other partitions because, with root & TWRP, you technically could have modified any and all of them.

irony_delerium said:
Download the FullOTA firmware for your current version. Extract system, boot, recovery, recovery2 (as you're on EMUI 5) and flash them either in TWRP or fastboot; that should eliminate PHH SU and TWRP, and ultimately leave the system in a clean state.
Start the update process - you've already been approved for OTAs and they've been offered, so they should happen automatically.
Click to expand...
Click to collapse
Flashing of 158 (original ROM version) went fine. Phone rebooted and titanium reported no root access, so it looks good.
After that I started the OTA update to 172 that waited already long time in my settings and it downloaded it. After downloading it gave me an error during the validation process of the file and asked to download it again.
Unfortunately now both the phone updater and the HiSuite app on my laptop say that 158 is the latest available firmware and no update is available.
I guess that I can download directly the newer firmware but I'm not exactly sure how to flash the whole package and what I should do with the other 2 files that come with it besides the update.zip

itenos said:
Flashing of 158 (original ROM version) went fine. Phone rebooted and titanium reported no root access, so it looks good.
After that I started the OTA update to 172 that waited already long time in my settings and it downloaded it. After downloading it gave me an error during the validation process of the file and asked to download it again.
Unfortunately now both the phone updater and the HiSuite app on my laptop say that 158 is the latest available firmware and no update is available.
I guess that I can download directly the newer firmware but I'm not exactly sure how to flash the whole package and what I should do with the other 2 files that come with it besides the update.zip
Click to expand...
Click to collapse
It might be tweaking out about the fact that you'd previously modified system.
I'd grab the last Nougat release (looks like 191; there are 2 of them, be sure it's not the rollback one you grab) and use hurupdater in TWRP to install it, then let the system try running OTA again.

irony_delerium said:
It might be tweaking out about the fact that you'd previously modified system.
I'd grab the last Nougat release (looks like 191; there are 2 of them, be sure it's not the rollback one you grab) and use hurupdater in TWRP to install it, then let the system try running OTA again.
Click to expand...
Click to collapse
I had to insert the SIM card of the country I bought my phone in to get the OTAs coming. Luckily I still had it with a few $ credit on it. It used just a few cents in data roaming for finding the new firmware, then I downloaded through wifi.
After 4 updates now I'm on 378 and no sign of Pie yet so this afternoon if I find some time I'll continue with rooting.

itenos said:
I had to insert the SIM card of the country I bought my phone in to get the OTAs coming. Luckily I still had it with a few $ credit on it. It used just a few cents in data roaming for finding the new firmware, then I downloaded through wifi.
After 4 updates now I'm on 378 and no sign of Pie yet so this afternoon if I find some time I'll continue with rooting.
Click to expand...
Click to collapse
Easy way:
Unlock phone, if you haven't yet again.
Download and flash TWRP from here: https://forum.xda-developers.com/mate-9/development/recovery-twrp-3-2-1-0-t3783353 (has decryption support) (flash to recovery_ramdisk as Huawei decided to split recovery partition into different parts)
Boot to TWRP, input pin (if you set a pin, else it will decrypt automatically)
Download Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Transfer Magisk to phone.
Flash Magisk zip in TWRP.
Reboot and you're done.
You might have to tinker around with Magisk Hide and hide apps if your banking apps still detect root.

As the Huawei Backup took over 4 hours to finish and i can't use Titanium, which is much faster, because I'm not rooted at the moment, I thought it's a good idea to first upgrade to Pie before unlocking my bootloader and losing all data. If I need to stay a few days without root it's ok.
Is there any way to get to Pie without being rooted? I tried the erecovery method on firmware finder. It says that my IMEI is now registered to download the update but when I enter erecovery it starts downloading the 378 oreo package.
I would like to avoid backing up and restoring twice this lengthy process, probably 16 hours all in all

itenos said:
As the Huawei Backup took over 4 hours to finish and i can't use Titanium, which is much faster, because I'm not rooted at the moment, I thought it's a good idea to first upgrade to Pie before unlocking my bootloader and losing all data. If I need to stay a few days without root it's ok.
Is there any way to get to Pie without being rooted? I tried the erecovery method on firmware finder. It says that my IMEI is now registered to download the update but when I enter erecovery it starts downloading the 378 oreo package.
I would like to avoid backing up and restoring twice this lengthy process, probably 16 hours all in all
Click to expand...
Click to collapse
The erecovery method won't work unless you can change the DNS settings on the network being used - it hijacks some of the requests to Huawei's servers to force the update. (And even then it's a bit finicky; I have yet to successfully use it, all things considered.)

Yesterday I finally received 9.0.1.159 with EMUI 9.0.1 by OTA. It installed fine and it's amazing how fast my phone became and how much screen on time I have now with my 2 year old device (8 full hours!). Good job Google and Huawei.
Being on Pie now I suppose that the instructions to root from you and ante0 are not valid anymore as they were meant for Oreo.
Could you please modify the instructions for Pie? And further, as I see that since yesterday in FirmwareFinder a new Pie update 9.0.1.178 popped up, could you please also add instructions how to take this OTA being rooted with Magisk once it arrives?
I've read a bit in the Magisk thread but I did not really understand the part of having to boot to recovery everytime I switch on the phone. Further they are talking there about EMUI 9 but I have already 9.0.1, is there maybe a difference I have to take care about?
Last but not least, I didn't forget my initial promise to donate a few bucks for the detailed instructions so please drop me your email in PM and I'll sent you a few through PayPal or in alternative, if you have some paid apps on the Playstore I could buy them so they might get more visibility.

itenos said:
Yesterday I finally received 9.0.1.159 with EMUI 9.0.1 by OTA. It installed fine and it's amazing how fast my phone became and how much screen on time I have now with my 2 year old device (8 full hours!). Good job Google and Huawei.
Being on Pie now I suppose that the instructions to root from you and ante0 are not valid anymore as they were meant for Oreo.
Could you please modify the instructions for Pie? And further, as I see that since yesterday in FirmwareFinder a new Pie update 9.0.1.178 popped up, could you please also add instructions how to take this OTA being rooted with Magisk once it arrives?
I've read a bit in the Magisk thread but I did not really understand the part of having to boot to recovery everytime I switch on the phone. Further they are talking there about EMUI 9 but I have already 9.0.1, is there maybe a difference I have to take care about?
Last but not least, I didn't forget my initial promise to donate a few bucks for the detailed instructions so please drop me your email in PM and I'll sent you a few through PayPal or in alternative, if you have some paid apps on the Playstore I could buy them so they might get more visibility.
Click to expand...
Click to collapse
The reason recovery boot is needed for Pie is because Huawei removed the ramdisk - in Pie, it's system as root with no way of forcing a ramdisk except by a recovery boot. So as a workaround, Magisk takes over recovery.
The installation instructions for it on Pie are pretty much the same as Oreo, except:
* Patch recovery_ramdisk, not ramdisk. Latest stable Magisk should work (18.1, iirc, has the patches to support recovery boot.)
* When booting, go to recovery. Magisk will start from there and take over the startup process.

irony_delerium said:
The installation instructions for it on Pie are pretty much the same as Oreo, except:
Click to expand...
Click to collapse
Hmm, where do I find the TWRP for Pie in order to flash?
And most importantly how do I have to behave in case of new OTAs coming?

itenos said:
Hmm, where do I find the TWRP for Pie in order to flash?
And most importantly how do I have to behave in case of new OTAs coming?
Click to expand...
Click to collapse
TWRP on this case, don't bother.
Extract your stock recovery from your firmware's update.app file, patch with Magisk Manager, and flash the patched image. When you want to flash an ota, put the stock recovery back.