when i was using camera360 + Sygic gps app phone got hanged , I removed the battery and inserted
Now the phone doesnt turn on at all, no sound , no vibration
But when I try to connect to pc and press volume down + power , USB is detected but fails to detect as drive , it just says new hardware found
I tried to install USB drivers but still its not detected and hence ODIN is also not detecting
Please suggest me how to recover
Thanks in advance
P.S : Was using custom rom 4.0.3
Read the stickies
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Hi,
My friend has bought used "Xperia mini pro", it is like a charm working with Android 4 ,but the problem is when we tried to root it we connected the xperia to pc but no respond or any changes ! just like if we connected it to charger !!! Windows7 can't prompt that new device connected neither Mobile status bar shows that's connected, even I checked Debugging mode is checked but nothing at all !! no SD card to mount no Debugging mode :crying:
I tried to boot into bootloader or recovery mode but no chance :crying:
what would be the hell problem ?? can it be sovled ? is it frimware problem ?
Please...
no one here could help ?!?
no one got like this problem before ??
I searched a lot on the Internet but seems nobody has ever faced like this problem else me
Hello please help
im on cm rom and it was working all good and smooth suddenly this morning screen turned off and tablet not rebooting since then ..i tried to put on charger and connect thru usb and install drivers gives me MTP USB DEVICE FAILED . i even tried the power button +volume down there's nothing
Device is suddenly dead..any ideas?
edit:
its GT-P5100
press powerbutton 30 seconds or longer, why are you crossposting your problem?
hi
today i reflashed the cm boots everything a'|nd i forgot to install camera mod and i go to power off and then i tried to power on but doesn't the battery was at 80% i connected to charger but the led diode on ,nothing,i tried to pc but tells me usb device not recognized i tried to install the drivers on my win10 but doesn't works driver in win10....
can someone help me ,please...
I had the same problem no longer, if the PC does not detect the phone you have to send it into service after sale to change the motherboard.
raptax said:
I had the same problem no longer, if the PC does not detect the phone you have to send it into service after sale to change the motherboard.
Click to expand...
Click to collapse
but everything worked fine+ mine has been rooted,detects like usb device not recognized
Oh sorry i misunderstand :/
Try to flash the stock ROM and install the drivers with the CD-rom mod of the Idol 3 maybe it will work
Envoyé de mon 6045X en utilisant Tapatalk
raptax said:
Oh sorry i misunderstand :/
Try to flash the stock ROM and install the drivers with the CD-rom mod of the Idol 3 maybe it will work
Envoyé de mon 6045X en utilisant Tapatalk
Click to expand...
Click to collapse
i downloaded the drivers but doesn't install it....,and detect like usb device not recognized..
i tried,installed the drivers,but nothing usb device is not recognized
Solved i Hard resetted and Works..................
This is the same problem as me, and i think the phone is still running but crashed after the "power off" on twrp right ? in this case you have to wait some time and your idol 3 will rebooting magically xD we don't have access to the battery so we can't remove the battery ... This is just a supposition
Arwinne1 said:
This is the same problem as me, and i think the phone is still running but crashed after the "power off" on twrp right ? in this case you have to wait some time and your idol 3 will rebooting magically xD we don't have access to the battery so we can't remove the battery ... This is just a supposition
Click to expand...
Click to collapse
i think the same,i solved...,i wait for about 10 hrs and press power on button and volume up and the phone started up...
so i had back the same problem turn off by twrp but doesn't won't to power on+ my power button not work..i opend the phone remove the battery and again turn but doesn't works..led works...but on pc usb device not recognized
so today my pc has recognized my device like Qualcomm HS-USB QDLoader 9008 (COM3) can anyone help me?
Use the Mobile upgrade to reset the phone ! This is like me but now the Mobile upgrade can't restore my phone !
the mobile upgrade doesn't work with macedonian models/....
edit:repaired with downlaod mode and panasonic firmware i will write guide
am i the only one who suffering this problem ??
i can't imagine that the developers and the specialists all over the whole world couldn't solve this f***** problem ??
is it possible !! this little problem marked unsolvable !!
after three days of continuous search for 24 hours looking for reasonable solution ?? till now neither me nor the other people who suffering just like me found the solution .
well i'll explain the problem i hope i could find reasonable answers from those beautiful minds :
my phone is galaxy s2 plus
when i connect the device to the laptop , the laptop recognize it . OK ? just concentrate
this leads us to conclude that all drivers are installed and updated and the usb port of the laptop works properly and the usb port of the phone is working properly too also this means that usb cable is good DO YOU AGREE WITH ME ?
so PLEEEEEASE DO NOT TELL ME TO CHECK ONE OF THOSE i have already checked them
now when i try to go to to download mode i should turn off the phone as all of you know as the device turns off, a small box at the corner of laptop appears telling me that the last device you connected malfunctioned and the computer doesnt recognize it . so how should i enter the f****** download mode if the laptop doesnt recognize the f****** phone i checked the device manger there is yellow triangle (at the same site where the device had been recognized before turning off ) unknown device "device descriptor request failed".
it seems normal for you cuz you think now in the recovery mode what if i told you that i have flashed wrong cwm recovery and now i am not capable of entering recovery .
abdanoo said:
am i the only one who suffering this problem ??
i can't imagine that the developers and the specialists all over the whole world couldn't solve this f***** problem ??
is it possible !! this little problem marked unsolvable !!
after three days of continuous search for 24 hours looking for reasonable solution ?? till now neither me nor the other people who suffering just like me found the solution .
well i'll explain the problem i hope i could find reasonable answers from those beautiful minds :
my phone is galaxy s2 plus
when i connect the device to the laptop , the laptop recognize it . OK ? just concentrate
this leads us to conclude that all drivers are installed and updated and the usb port of the laptop works properly and the usb port of the phone is working properly too also this means that usb cable is good DO YOU AGREE WITH ME ?
so PLEEEEEASE DO NOT TELL ME TO CHECK ONE OF THOSE i have already checked them
now when i try to go to to download mode i should turn off the phone as all of you know as the device turns off, a small box at the corner of laptop appears telling me that the last device you connected malfunctioned and the computer doesnt recognize it . so how should i enter the f****** download mode if the laptop doesnt recognize the f****** phone i checked the device manger there is yellow triangle (at the same site where the device had been recognized before turning off ) unknown device "device descriptor request failed".
it seems normal for you cuz you think now in the recovery mode what if i told you that i have flashed wrong cwm recovery and now i am not capable of entering recovery .
Click to expand...
Click to collapse
Do you check the USB/ANDROID debugging mode is on or not?
If not ON , you turn ON it. And then try again
I experienced this with win 8 and win 10. You need to go to device manager and disable USB root hub.
Connect your device to the computer in flash mode. The computer will say “USB Device Not Recognized”.
Go to Device Manager and you will see your device listed as “Unknown USB Device (Device Descriptor Request Failed)” in “Universal Serial Bus controllers” section
Now in “Universal Serial Bus controllers” section you should also have “USB Root Hub”’s (might be several of them). Click through them and find the one that has “Unknown USB Device (Device Descriptor Request Failed)” in the “Power” tab (should be next to General).
Right click on that “USB Root Hub” and press “Disable”. Now you should have a small arrow pointing down on the USB Root Hub icon and the “Unknown USB Device (Device Descriptor Request Failed)” should have disappeared.
Click to expand...
Click to collapse
After you are done, don't forget to enable it back.