LATEST KARBONN A9 ROM--- NeutrinoRom^A9
This is 100% working rom for A9. First you need to install custom recovery in your A9 then you can
install This NeutrinoRom^A9. Follow the procedure below to install Custom recovery and NeutrinoRom^A9.......
First download A9CustomRecovery,zip from this link: http://mediafire.com/?gnixgoj7yg5tcvb
and unzip it in a folder on your computer,after unzip you will find root.bat file there, ok we will
come back to root.bat little later.
Now 1)Boot your phone in fastboot mode by holding vol up + power on boot till you see a green screen.
2)connect your phone to pc via USB cable and wait for fastboot drivers to install.
3)Double click and run ROOT.bat ( which you have unzip earlier(A9CustomRecovery.zip ))
the downloaded zip file)
4)Your phone will reboot after the process completes.Custom recovery is installed now.
Now follow these step to install NeutrinoRom^A9.zip file. Download Link: http://mediafire.com/?g9b3j8b9vcctvvy
First copy the zip file into memory card and insert the memory card in the phone and boot the phone into
recovery mode by holding VOl up + power button (first you will see green screen then after some time red
screen.When you see the red screen leave the vol up and power buttons. Then 1.Wipe the data factory rest
2.format partition cache 3.select install zip from memory sdcard 4.choose zip from sdcard. It will take about
2-3 minutes to install. After installation go back and reboot the device and its done...Enjoy and give your
feed back...
LATEST KARBONN A9 ROM---> NeutrinoRomV2^A9
http://forum.xda-developers.com/showthread.php?p=33159298#post33159298
Karbonn A9 Rom---NeutrinoEliteRom^K9 Just 91MB size...super lite
http://forum.xda-developers.com/showthread.php?p=33160334#post33160334
Hit thanks if this post helped you.
If you like, you can donate and contribute to the developer luminousin...Keep smiling...
feature and screen shot pls...............
Sounds good, screenshots plz.
No extra feature....
Just stock rom with some apps
luminousin said:
LATEST KARBONN A9 ROM--- NeutrinoRom^A9
This is 100% working rom for A9. First you need to install custom recovery in your A9 then you can
install This NeutrinoRom^A9. Follow the procedure below to install Custom recovery and NeutrinoRom^A9.......
First download A9CustomRecovery,zip from this link: http://mediafire.com/?gnixgoj7yg5tcvb
and unzip it in a folder on your computer,after unzip you will find root.bat file there, ok we will
come back to root.bat little later.
Now 1)Boot your phone in fastboot mode by holding vol up + power on boot till you see a green screen.
2)connect your phone to pc via USB cable and wait for fastboot drivers to install.
3)Double click and run ROOT.bat ( which you have unzip earlier(A9CustomRecovery.zip ))
the downloaded zip file)
4)Your phone will reboot after the process completes.Custom recovery is installed now.
Now follow these step to install NeutrinoRom^A9.zip file. Download Link: http://mediafire.com/?g9b3j8b9vcctvvy
First copy the zip file into memory card and insert the memory card in the phone and boot the phone into
recovery mode by holding VOl up + power button (first you will see green screen then after some time red
screen.When you see the red screen leave the vol up and power buttons. Then 1.Wipe the data factory rest
2.format partition cache 3.select install zip from memory sdcard 4.choose zip from sdcard. It will take about
2-3 minutes to install. After installation go back and reboot the device and its done...Enjoy and give your
feed back...
LATEST KARBONN A9 ROM---> NeutrinoRomV2^A9
http://forum.xda-developers.com/showthread.php?p=33159298#post33159298
Karbonn A9 Rom---NeutrinoEliteRom^K9 Just 91MB size...super lite
http://forum.xda-developers.com/showthread.php?p=33160334#post33160334
Hit thanks if this post helped you.
If you like, you can donate and contribute to the developer luminousin...Keep smiling...
Click to expand...
Click to collapse
All downloads are at follwing link....
http://www.filecrop.com/k-9-android.html
enjoy
ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...
not working
root method is not working......
just check dude
sp flash method is working...
hats off gor u r work dude...
in gingerbread we dont have sd-extn so its not mounting...
lets begin for custom rom development
karthiksitian said:
root method is not working......
just check dude
Click to expand...
Click to collapse
okk I will double check it. In mean time you can try non-rooted method, I will definitely work...
d you have the original recovery?
davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
still sd-ext is not working
karthiksitian said:
still sd-ext is not working
Click to expand...
Click to collapse
what's the error you are getting in CWM while mounting sd-ext or taking nandroid backup...
Have you installed link2sd for mount script??
davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
see #1 post...
When I tried to flash cmw so toll shows a Eboot error 16008 help
worked
aman.droid said:
ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...
Click to expand...
Click to collapse
now i can control my phone
rooted and istall cwm
I'm getting the following error. How can I get it resolved?
"[Android] Partition Size Changed"
Update:
I finally got my device bricked by replacing the content in the scatter file to the following text. Don't try this!
{
}
RECOVERY 0xFC0000
{
}
Click to expand...
Click to collapse
Is there anybody who got a Micromax A25 unbricked?
pretty easy...
mail me @ [email protected]
i will tell u in detailed....
need Stock rom of Micromax Smarty a25
vasukinv said:
I'm getting the following error. How can I get it resolved?
"[Android] Partition Size Changed"
Update:
I finally got my device bricked by replacing the content in the scatter file to the following text. Don't try this!
Is there anybody who got a Micromax A25 unbricked?
Click to expand...
Click to collapse
Any one please could you upload Stock rom of mmx a25,,, i flashed another rom in this and got my device bricked,,,
aman.droid said:
ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...
Click to expand...
Click to collapse
i think i have got semi bricked phone ....micromax a25
it is detected by computer and make us port..
as the steps mentioned by u i launch flash tool ----> load scatter file ---->then disable da download all.--->
then it gives me error that recovery image is not in valid da format...
do iam doing something wrong...
thanxx
thanxx,sp flash tool is workin and that mobile uncle hangs and doesn't work.
1.any custom rom for micromax a25
2.any supportable cwm recovery for micromax a100
davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
the recovery is likely to be original ,but works great b'coz of this i flashed micromax a52 custom roms and it worked for me
Please help!
Root method is not working. I am unable to install cwm through mobileuncle tools. :crying:
install it via sp flash tool
Sent from my A25 using Tapatalk 2
no one replys here
Press thanx if liked !
Click to expand...
Click to collapse
Can any one help?
my device is also semi brocked now i want to flash stock rom but sp ft gives me BROM error
so can any one tell me how to put this phone in bootrom mode?
How to install Custom Recovery & root SM-J210F?
Stuck in this question?
So finally here the solution,custom recovery & root is available fo Samsung Galaxy J2 2O16.
HTML:
Warning:-
Don’t blame me if anything goes wrong.
You are doing this on your own risk.
Requirements:-
-Windows running PC
-Data Cable
-Odin
-Samsung Drivers
-Super SU zip
-TWRP Recovery
-Common Sence
Downloads:-
SuperSU ZIP-
Samsung Drivers-
Odin-
TWRP Recovery
Link: Click Here
All files are in a single zip.
Instructions:-
-Install Samsung drivers
-Turn off SM-J210F and press Volume down+Home+Power keys together then a window will appear,press Volume up for continuing.
-Connect the data cable with your device.
-Open Odin.exe and select “AP” then choose the “recovery.tar” and start the flash process.If succesfully done,you will see a ‘PASS’ massage.
-So we have done with fashing TWRP Custom recovery.Now disconnect the data cable.
-Open recovery mode by pressing Volume UP+Home+Power keys together.
-Select Install tab and flash SuperSU Zip,then reboot.
-Reboot,Done!
Join Samsung J2 2016 Facebook group for stay updated from here. :fingers-crossed:
Credits/Thanks:-
-TWRP Porter(Don’t know his name)
-TWRP Team
-Android Matrix Development
XDADevDB Information
TWRP 3.0.2, Recovery for SM-J210F
Contributer:-
@Aditya Kr
If you face any problem,you can ask below...
See post #2 for Screnshots & Post #3 if you face wrong language in Recovery mode.
Hit the Thumbs Up(Thanks) button,If it's useful for you.
Screenshots:
For changing language of Recovery mode
-Select "Settings" tab
-Click on last icon.
-Choose your language,i.e. English
-Set language,Done!
See the following pictures for reference.
I want custom rom for SM-j120F plzz tell me which one is work properly?? Which version of Marshmallow is work on J1(6) SM-j120F?? Plzz help mee
dear aditya, i could successfully flash twrp by odin. but then when i enter recovery mode to flash supersu, odin mode comes again instead of twrp, so i cannot install supersu.. what can i do. plz help.
Outs this a cwm recovery file?
First of all thanks for the post.
I had flashed the recovery file given in the link but I found out that it is not a TWRP recovery but CWM recovery (I'm totally new to flashing).
I then tried to install the SuperSu file through a SD card but it always failed. Can you please help so that I'm able to get out and complete the rooting process?
( I've tried flashing to flash other TWRP files through odin in the same method but nothing changes)
deleted
method not working for marshmallow
kuberrocks96 said:
Hello Guys,
Today i Kuber Sharma will tell you how to Root your Coolpad Note 3 Lite.
In this Tutorial i will tell how to Root:-
1 CoolUI 6.0 - Lollipop
2. CoolUI 8.0 - Marshmallow
Rooting CoolUI 6.0 Lollipop
Download:-
KingRoot app
TWRP CN3L
Note :- Good Net connection required.
1.Download KingRoot.apk
2.Open it
2.Click on Root
3.Wait for it to Complete
4.Done , You are rooted.
5.Now Download Flashify app and download TWRP
6.Open Flashify App and install Recovery
7.Reboot To TWRP
8.Reboot to System
9.Done , TWRP also Installed
https://youtu.be/2jeytBBUTdo
Rooting CoolUI 8.0 Marshmallow
Download :-
Super SU System less zip
Android_mt6735_scatterfile
Sptooldrivers
MTK drivers
Spflashtool
TWRP for CN3L
INSTALL SP Flash tool Drivers and MTK Drivers - Now Reboot.
Create a new folder name it TWRP and paste "recovery.img" and "MT6753_Android_scatter.txt" files into thisl folder.
Extract Spflashtool
Now right click on "flash_tool.exe" and run as administrater,after flashtool start,click on "scatter loading" and select "MT6753_Android_scatter.txt" .
Click on "download"(on left top side with green colour icon in spflash tool).
Now switch off phone and connect to Pc via USB cable
If everything fine then you will see a pop up with green tick.
Disconnect phone from PC.
Press Volume up and Power button till recovery comes on the screen(This is important step,don't boot into normal mode,after flashing recovery you have to direclty go to recovery mode by pressing Volume up + Power button similtaneously).
If you get Unmodified System Partition warning then swipe right to allow modifications.
Select "Install"
Select SuperSU-v2.78.zip ( System less Super SU )
Swipe right to confirm flash
Reboot the device.
Note:- if you found no superSU app on reboot,then reboot to recovery and flash superSU again.
Done , Your Device is Rooted.
Steps for driver installation in windows 8,8.1 and 10 users:
**Click the Start Start menu and select Settings.
**Click Update and Security.
**Click on Recovery.
**Click Restart now under Advanced Startup.
**Click Troubleshoot.
**Click Advanced options.
**Click Startup Settings.
**Click on Restart.
**On the Startup Settings screen press 7 or F7 to disable driver signature enforcement.
Your computer will restart and you will be able to install non-digitally signed drivers. If you restart your computer again the driver signature enforcement will be re-enabled.so don't restart again before successful installation of both drivers
Subscribe to my channel for more Videos on COOLPAD Note 3/Lite:-
https://youtu.be/aKQkdMj2iDE
Click to expand...
Click to collapse
I AM GETTING AN ERROR WHILE DOING THE ABOVE METHOD
I AM SENDING U LINK OF SCREENSHOT OF THE ERROR
https://drive.google.com/open?id=0B45g_zhLbKf7alRnUU9VZDBQdDQ
PLZ DO REPLY TO ME
jash gopani said:
I AM GETTING AN ERROR WHILE DOING THE ABOVE METHOD
I AM SENDING U LINK OF SCREENSHOT OF THE ERROR
https://drive.google.com/open?id=0B45g_zhLbKf7alRnUU9VZDBQdDQ
PLZ DO REPLY TO ME
Click to expand...
Click to collapse
Installed drivers?
im getting the same error
I don't see link for twrp recovery
Hey thanks for all the tutorial but i don't see the link for twrp recovery.
Jeron p wilson said:
Hey thanks for all the tutorial but i don't see the link for twrp recovery.
Click to expand...
Click to collapse
Added
i just ported twrp 3.1.1-1 from libra to aqua, and it suport for OTA update
how to install :
- with adb fastboot :1. turn ur HH to fastboot mode
2. plug ur usb
3. open cmd on ur adb file directory
4. write "fastboot flash recovery twrp-3.1.1-1-aqua.img"
5. fastboot reboot
- with twrp(if u have installed twrp before)
1. save the recovery to ur sdcard
2. turn your recovery mode (press volume up + power button)
3. tap on install
4. tap on image
5. select the new recovery
*if u have stuck on logo install this
1. turn ur hh to fastboot mode
2. on cmd write "fastboot flash boot boot.img"
3. write on cmd "fastboot reboot"
ported by me, tell me if u have some trouble
link bellow
:laugh::silly::good::good:
twrp and boot image:
New TWRP 3.1.1-1-aqua (support OTA update)
en(dot)miui.com/thread-753595-1-1(dot)html
(Source: Xiaomi MIUI Official Forum)