- Fixed Audio Compression in roms
- Fixed Audio compression in PUBG (Now full Stock rom like audio Feel) No stutter at all
- Updated to Stock Pie Audio Blobs and Configs
- Removed blobs and config files which conflict with the original audio policy and audio effects...
* Flash it Like a normal zip ( if it gives any error on flashing then mount system and vendor else u are good to go)
Special Thanks to @EndLess for the base zip and idea.
------------------------------------------------------------------------
PLEASE READ THIS BEFORE DOWNLOADING:
If, you are confused as to which Audio zip to install, please read my post here, before downloading:
https://forum.xda-developers.com/max-pro-m2/themes/audio-fix-custom-roms-t3933011/post81424353
------------------------------------------------------------------------
DOWNLOADS
For Q ROMs:
**Removed
Read this post:
https://forum.xda-developers.com/max-pro-m2/themes/audio-fix-custom-roms-t3933011/post81846069
For Pie ROMs:
Audio_fix_24bitP.zip
Checksum (SHA-1):
83611283804d2a9d841b2bbbf86bc9bd4f4a9c5d
Download:
https://drive.google.com/file/d/1fGiQbIBZpN5xcDkqVtY4gDW5IykCSWHm/view?usp=sharing
Audio_fix_16bitP.zip
Checksum (SHA-1):
d781fa85662acfa5929d51f3bf5a5a73331af0c1
Download:
https://drive.google.com/file/d/1ecd7d5fJzvaU_oU7DaLKAGSNOmO3BWOu/view?usp=sharing
------------------------------------------------------------------------
NOTE FOR ANDROID 10 USERS
If you facing any issues with the Q zips, for example if the phone gets stuck at boot logo, then it may be an issue of your recovery.
In such cases, do the following:
- Make sure you use TWRP recovery
- Mount /vendor before flashing
- Clear cache and dalvik
- Reboot
TROUBLESHOOTING
1) You have to perform a dirty flash of your ROM, when switching between the two versions of the audio fix.
2) After installing the fix, you might have to uninstall and reinstall your audio mods like AML and Sauron, otherwise there are chances that the fix would not appear to work or your audio mods might misbehave.
3) After installing the fix, if you are facing some minor distortions then reboot to recovery and install it one more time.
4) If some distortions are still present, then try installing the 16bit zip.
------------------------------------------------------------------------
CHANGE LOG
14-Jan-2020
- Ported both audio fix zips to Android 10. There will be 4 zips now. Select the appropriate one that you need from the 1st post
- Used audio config from latest arrow 10 with a few modifications. Thanks to Arrow Dev Team.
- Removed some unnecessary audio blobs and configs. Almost no distortions in audio now.
23-Sept-2019
- Fixed the 24bit zip to work with lineage and other ROMs based on the lineage tree...
15-July-2019
- Audio_fix_v5.zip renamed to Audio_fix_24bit.zip
- Audio_fix_v6.zip renamed to Audio_fix_16bit.zip
- Removed most redundant config and mixer files (Already present in custom ROM tree)
- Audio blobs taken from WW (India) 1906.067 release
- Added newer changes from new Arrow trees to audio files
26-May-2019
- Created a new separate 16bit zip
- Fixed audio distortions during audio recording (e.g. during WhatsApp voice notes, call waiting etc.)
24-May-2019
Quick Update:
- Fixed Dirac/ZenfoneParts crash (On some ROMs like Havoc and Superior)
- Properly fixed PUBG audio this time...
24-May-2019
- Initial release
- Fixed BT audio issue
Hit thanks :good: if it helped you
Are all the bugs, like BT audio, fixed?
lscambo13 said:
Are all the bugs, like BT audio, fixed?
Click to expand...
Click to collapse
Yes... Tested myself...
Tyakrish said:
- Fixed Audio Compression in roms
- Fixed Audio compression in PUBG (Now full Stock rom like audio Feel) No stutter at all
- Updated to Stock Pie Audio Blobs and Configs
- Removed blobs and config files which conflict with the original audio policy and audio effects...
* Flash it Like a normal zip ( if it gives any error on flashing then mount system and vendor else u are good to go)
Special Thanks to @EndLess for the Base zip and idea.
Download Link : -
https://drive.google.com/uc?id=1mS2rSwRM0vE_sQUJWAtAgm5UHSUjeZyq&export=download
Filename: Audio_fix.zip
Checksum(SHA-1): 7b24766148b278aa372a9d3f54f9af9e83b33035
Click to expand...
Click to collapse
Thanks man
Updated zip:
- Fixed Dirac crash (On some ROMs like Havoc and Superior)
- Properly fixed PUBG audio this time...
Tyakrish said:
Yes... Tested myself...
Click to expand...
Click to collapse
Awesome
Updated zip:
- Fixed audio distortions during audio recording (e.g. during WhatsApp voice notes, call waiting etc.)
EDIT:
The new zip 'Audio_fix_v6.zip' uses stock pie audio config. This zip fixes some minor audio distortions which might occur as mentioned above.
But if you aren't facing any distortions, then I would suggest that you install 'Audio_fix_v5.zip' which I also posted above. The v5 zip uses Arrow audio config and uses 24 bit audio PCM for its primary output, which means more accurate audio and better audio quality.
Thanks @TekSabz and @Praveen Pannu for testing
is this fix bluetooth audio lag in pubg
is this fix bluetooth audio lag in pubg
Does this also fix very low incall volume on original rom? Thank you!
g40q90 said:
Does this also fix very low incall volume on original rom? Thank you!
Click to expand...
Click to collapse
This fix is meant for custom ROMs only... Flashing on stock pie may have unforseen results...
You can try it though. I shall not be held responsible for any damages.
Make sure you have backed up your system and vendor through recovery before flashing the zip. If you are having any issues with audio, or the entire ROM itself, restore system and vendor from the backup.
If it does work, then do tell me.
Thanks man appreciated
Update:
As you might know, GCam has been fixed in most of the recent custom ROMs. For this purpose, the developers had to switch to a different device tree. As a consequence of this, audio somewhat crackles in the newer updates of some custom ROMs (according to users).
I want to inform you that some users have reported that flashing any of my audio fixes can fix this issue also, since my zip contains original audio blobs, mixer and config files from Stock Pie.
Now I don't want to create more confusion, so I am not making another zip.
For Advanced users, in case you want the same sound which was default in the custom ROMs before the above mentioned changes to device tree, then you can follow the steps below:
1) From a previous build of your ROM (before GCam was functional), go to /vendor/etc/audio and copy and backup the file "audio_policy_configuration.xml"
2) Flash the newer build of your ROM.
3) Flash any of my audio zip files.
4) After flashing the new build and one of my audio fixes, in TWRP File Manager, go to /vendor/etc/audio and delete the audio policy configuration file which is present and replace it with the one which you had backed up earlier.
5) Reboot. Done.
Otherwise, you can even modify my zip and replace the audio policy config file in it. In fact I think someone has already done it.
XDA is all about learning ! Enjoy
Edit:
It does seem that on some of the telegram channels, some audio fix zips are being shared. I have seen them. They are basically rip-offs of mine and Endless's zips.
I have no problem that people rip-off, but those that do it and release them, must give proper credits to the original person i.e. @EndLess.
Also these rip-off zips do nothing else but just create more confusion for the users.
Arown orton said:
Thanks man appreciated
Click to expand...
Click to collapse
No prob.
Works for me. Thx mate.
Updates:
15-July-2019
- Audio_fix_v5.zip renamed to Audio_fix_24bit.zip
- Audio_fix_v6.zip renamed to Audio_fix_16bit.zip
- Removed most redundant config and mixer files (Already present in custom ROM tree)
- Audio blobs taken from WW (India) 1906.067 release
- Added newer changes from new Arrow trees to audio files
Please note the above changes to the filenames of the two zips...
UPDATE:
- Fixed the 24bit zip to work with lineage and other ROMs based on the lineage tree...
Download from 1st post...
Tyakrish said:
UPDATE:
- Fixed the 24bit zip to work with lineage and other ROMs based on the lineage tree...
Download from 1st post...
Click to expand...
Click to collapse
These zips are not working on pixel experience android 10 (asus max pro m2). , After flashing these zips phone stuck on Google logo
---------- Post added at 04:17 PM ---------- Previous post was at 04:12 PM ----------
Tyakrish said:
Updated zip:
- Fixed audio distortions during audio recording (e.g. during WhatsApp voice notes, call waiting etc.)
EDIT:
The new zip 'Audio_fix_v6.zip' uses stock pie audio config. This zip fixes some minor audio distortions which might occur as mentioned above.
But if you aren't facing any distortions, then I would suggest that you install 'Audio_fix_v5.zip' which I also posted above. The v5 zip uses Arrow audio config and uses 24 bit audio PCM for its primary output, which means more accurate audio and better audio quality.
Thanks @TekSabz and @Praveen Pannu for testing
Click to expand...
Click to collapse
Not working in pixel experience android 10 asus max pro m2
Please help
P.K.S said:
These zips are not working on pixel experience android 10 (asus max pro m2). , After flashing these zips phone stuck on Google logo
---------- Post added at 04:17 PM ---------- Previous post was at 04:12 PM ----------
Not working in pixel experience android 10 asus max pro m2
Please help
Click to expand...
Click to collapse
The zips are not updated to work with Android 10 yet. For now please only use them on Pie ROMs.
Deleted
Couldn't install it on Pixel Experience with Android 10 (2019-12-12 version). Phone doesn't boot after flashing 24-bit audio patch.
Related
CM10 for Motorola Milestone 2
[ Downloads | Google apps ]
Changelog
11.08.2012 - Initial release based on Quarx2k's, Epsylon3's and Nadlabak's brilliant work.
12.08.2012 - Fixed mobile data, added initial value for keypad type, support for GB kernel.
19.08.2012 - Common builds for Froyo and GB kernels (verified on UK Froyo and CH GB), keylayouts from alexc804's CM9. CM team implemented some more Trebuchet settings.
22.08.2012 - Fix bootmenu overclock, fix compass, CM10 bootanimation, reduced heapsize, drop support for Froyo kernels, clean up proprietary files.
23.08.2012 - OTA updates via otaupdatecenter.pro app
25.08.2012 - Preserve baseband during updates, fix crashing Hostapd (thx stargo!), plug OTA updater into Settings->Additional system updates
28.08.2012 - Fixed audio in car dock (thx to Nadlabak)
29.08.2012 - Fixed WiFi tethering (thx to stargo)
30.08.2012 - Fixed WiFi channels > 12
01.09.2012 - Use native JB keyboard layout switching (Settings -> Language & input -> Physical keyboard). Added battd compatibility for Froyo kernels (I still recommend using GB kernels as the only supported ones).
03.09.2012 - Fixed audio in video recording, stereo audio enabled, decreased FPS in video preview (Quarx2k)
04.09.2012 - Fixed compass, improved video perfomance (nadlabak), updated SGX libs (Quarx2k), fixes for qwertz layout
08.09.2012 - Added baseband selection, modified currency symbols in keyboard layouts, proprietary files used from UK 2.3.4, updated OTA Updater
10.09.2012 - Added US and UK QWERTY variants, alternative chars at ALT+SHIFT.
12.09.2012 - Hopefully fixed data connection problems (thanks to SlugZero)
17.09.2012 - Corrected azerty layout, corrected charging LEDs, new touch screen driver (thx M1cha) + multitouch fix, torch LED while focusing (thx paalsteek), call recording enabled libaudio
22.09.2012 - Key next to ALT mapped as CTRL (useful for keyboard layout switching), final fix for torch light while focusing, reverted preview FPS limit to improve audio stability during video recording
23.09.2012 - Corrected superuser, added hebrew (thx to Skyfox1) and polish keyboard layouts
29.09.2012 - Fixed portuguese time format (thx to Snowraptor)
09.10.2012 - Custom kernel (thx to Czechop) - consider this build as unstable/experimental. Boot reason is broken - OTA update won't boot into recovery, you need to enter recovery manually (volume down while booting).
13.10.2012 - Android 4.1.2, CRT animation, live wallpapers (2nd-init build)
27.10.2012 - Fix boot reason, fix charge only mode, fix low performance after boot, kernel optimizations, JB interactive governor, power hal (need interactive governor to work properly), fix overclock (thx to SkrilaxCZ, Nadlabak and Quarx2k)
03.11.2012 - Fixed battery usage and CPU frequency stats, added more Live Wallpapers, new CM File Manager (read this)
10.11.2012 - Fixes for 2ndboot, 10MB more of free RAM (thx to Nadlabak)
28.12.2012 - Fixed CM File Manager
Hints & issues
lgCamera works better with video recording
Currently wipe data and cache in OTA updater does not work
CM10 does not contain Car home, you need to install it manually (search for google car home)
Installation guide for stock roms users
1) Root your phone (you may use SuperOneClick root method)
2) Install Droid2 Bootstrap Recovery
3) Open Droid2 Bootstrap Recovery and tap "Bootstrap Recovery", then "Reboot Recovery" granting root privileges. The phone should reboot into recovery. Use volume buttons to navigate, camera button to accept, power button to go back. You will install files by selecting "Install zip from sdcard".
4) Optionally: create a backup of your data
5) Install latest CM ROM image file.
6) Optionally: install Google Apps
7) Select "Wipe data/factory reset"
8) Reboot and enjoy
9) Optionally: select baseband version corresponding to your country and BPSW version
Installation guide for CMx roms users
1) Optionally: create a backup of your data
2) Install latest CM ROM image file.
3) Optionally: install Google Apps
4) Wipe data and cache partition
5) Reboot and enjoy
6) Optionally: select baseband version corresponding to your country and BPSW version
Installing updates
The most convenient way of installing updates is through built-in OTA updater. Note that currently wipe options do not work there, so you may need to do it manually in recovery. For most cases that won't be necessary though.
Sources
repo init -u git://github.com/tezet/android.git -b jellybean
Donations
If you like and appreciate my work, and you may donate here (now in English).
I do not provide support by PM nor e-mail. Please ask questions here.
Waiting for more information about the ROM CM10, and hoping someone is available to test??
camera, wifi, scanner, etc!
BEAUTIFUL WORK! thank you!
how about upgrading from Cm9 by sfc3001 ? does it work ?
WHOA! This is as awesome as unexpected! Thanks a million Tezet, gonna try it asap *-*
Thank you very much for your work..!
Waiting for the GB based Kernel..!!
harisit2005 said:
how about upgrading from Cm9 by sfc3001 ? does it work ?
Click to expand...
Click to collapse
If you have CH version, you may give it a try. Install my CM7 first and then CM10 and gapps. It should work in theory, but I don't have a clue if gapps are upgradable between these versions. Do a nandroid backup first if anything goes wrong
Thank you very much Tezet! You brought life back again to out Milestones 2!
I want to try it but Gapps web isn't working for me at the moment. Seems ive got to use the gapps for jb 20120726. I aren't that old.
so Tezet comes back with a bang!!
Waiting for the GB kernel based release.
Latest gapps mirror:
http://www.multiupload.nl/7D297URVOS
tezet said:
Latest gapps mirror:
http://www.multiupload.nl/7D297URVOS
Click to expand...
Click to collapse
Thks! :angel:
thanks a lot
i'm waiting for gb based =D and thanks again for this surprise =)
one question, wich bugs have this version??
There are no known bugs/limitations other than mentioned on the first post (so far).
sahilarora911 said:
so Tezet comes back with a bang!!
Waiting for the GB kernel based release.
Click to expand...
Click to collapse
Amin to that!
Good to have you back tezet
Sent from my MotoA953
Installed it already. Coming from CM7.
Tezet, is project butter working?
I cannot get signal. Installed MS2 baseband and choosed mine (live in Argentina) but no result!
Is it supposed to go with european or chinese kernel?
I completely lost mobile network signal and cannot restore it even after following the guidelines in here
http://forum.xda-developers.com/showthread.php?t=1182050
any help would be welcome please
algarues said:
Is it supposed to go with european or chinese kernel?
I completely lost mobile network signal and cannot restore it even after following the guidelines in here
http://forum.xda-developers.com/showthread.php?t=1182050
any help would be welcome please
Click to expand...
Click to collapse
None of them. Any Froyo kernel should be fine, I use it with UK Froyo kernel (the one from CM7 build).
tezet said:
There are no known bugs/limitations other than mentioned on the first post (so far).
Click to expand...
Click to collapse
wow
i'll try just right now =D =D
thanks a lot tezet
u re the best =D
noastick said:
Installed it already. Coming from CM7.
Tezet, is project butter working?
I cannot get signal. Installed MS2 baseband and choosed mine (live in Argentina) but no result!
Click to expand...
Click to collapse
I haven't looked deeply into it, but I suppose it is.
If someone figures out how to gain signal, i would appreciate it! I cannot get it to work :S
Just updated and tested it for a bit... it is really smooth =)
Everything worked fine... except gsm =/, but probably because I have the wrong kernel? I come from sfc3001 cm9 (CM9-NIGHTLY-120721-milestone2-ch.zip).
Im going back to my backup from cm9 until I'm able to use the phone as a phone on cm10.
But that was a awesome job =) :good:
.
Highlights:
Android 5 - Lollipop
Integrates the latest Dhollmen Kernel.
Supports NTFS file system.
Supports EXFAT filesystem.
Supports F2FS filesystem.
Available configuration options for Dhollmen Kernel overclock.
Integration of Viper4 Audio FX as an equalizer, amplifier and sound effects manager.
Supports for Joystick and game controllers.
Supports for gestures on the keyboard.
First Installation:
Download the zip file from Rom as tablet model
Download the add-on with pre-settings Viper4 Convolver IRS
Download the add-on with Google applications (Gapps)
Boot the tablet in recovery mode
Make "wipe data / factory reset" at this time
Install the Rom file
Install the Viper4 IRS file
Install The Gapps file
Reboot
Subsequent installations:
Download the updated zip file
Reboot to recovery mode
Do NOT any kind of "wipes"
Install the updated zip file
Reboot
Information:
Frequently asked questions you must read.
Downloads:
Recovery TWRP
WARRANTY: You agree that this product is provided "as is" without any warranty, either expressed or implied, on its operation.
DISCLAIMER: Your assumes at your SOLE RESPONSIBILITY all results produced by the "software" and/or instructions in this thread.
XDA:DevDB Information
Dhollmen, ROM for the Samsung Galaxy Tab 2
Contributors
tuxafgmur
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Current Beta Version: 5.0.2
Beta Release Date: 2015-02-09
Created 2015-02-03
Last Updated 2015-02-15
.
> Rom's Notes.
Who installs this Rom, accept it "as is".
Contains just the apps and options installed.
What you want to add will have to be obtained from Google-Play or any other sources.
Please, don't report bugs if you are not using the installed Dhollmen Kernel.
In case of questions or comments, you must indicate additional apps, tweaks or installed "optimizations".
if you insert images, do it in a 'hide' tag. This hide your image until an user click to show it.
I assume you has installed a suitable Recovery and know how to perform the required steps.
Keep in mind that Antutu and others related apps give you very similar values, regardless of the Rom used.
In such apps, OC influence on speed, but its goal is to evaluate the hardware, not the Rom.
Don't use any kind of overclock before three consecutive stability test in Antutu.
> Rom take a long time to boot after installing.
It is quite normal because ART is used and applications are self-compiled at first boot time, after installing a new Rom.
> Applications are slow to start after installing.
It is quite normal because ART is used and have self-compiled before first use.
Although it may seem at times, the Rom is not hung, just have to wait.
> Get Root access.
In Settings app, entering development option and select Root access.
If you don't see these items, we activate:
Touch repeatedly on About tablet > build number. From now on, initial setting screen show that option, plus Performance.
> Get Performance access.
If you don't see these items, we activate:
Touch repeatedly on About tablet > build number. From now on, initial setting screen show that option, plus Development option.
> Google Apps (Gapps).
All Gapps packages available are virtually identical.
Only differ, from each other, in the amount of installed applications.
Never two different packages must be installed as likely to cause Google applications FC.
The Dhollmen Gapps, being valid for any Rom, are specifically adapted for installation on it.
> Viper4 - Convolver - IRS.
This application controls the System Sound FX.
It also includes a number of advanced pre-equalizer settings (made by others) that are the IRS whose installation files requested.
Access to Convolver (manager of the IRS) is obtained by selecting the option Expert in Experience Settings.
Using another equalizer (provided by external applications) usually interfere with it.
You can only have one active equalizer in the system, but if you want to use another one, kindly Viper4 can be turned off.
> Restoring backups.
It is very common Titanium Backup (or similar) problems in Rom.
If backup /data partition are made and, after a change of Rom, restored, usually side effects will occur.
In this directory and subdirectories it contains, there are many configuration files and internal databases.
When it comes to a specific application should not be a problem as long as it is not part of the Rom.
When sub-directories containing settings are restored, the likelihood of problems increases exponentially.
For example, all Roms have a Settings application, but the content of his configurations differs between them and is not interchangeable.
Under no circumstances you should restore /system partition apps.
> Brick Bug.
Don't worry about.
No problems here
> Recovery.
In the wave of failures of equipment, widely discussed and until the problem is completely cleared
The user is strongly advised not to use another recovery than Dhollmen TWRP-2.8.0.5 or Andi TWRP-2.8.0.1
First impressions: very smooth ??
Before I had slimlp. Did a full wipe and factory reset and installed it. No problems at all!
First reboot was much quicker than slimlp.
So far didn't find any problem with it.
Great job already Dhollmen.
Grtz,
John
---------- Post added at 09:40 PM ---------- Previous post was at 08:41 PM ----------
First hickup: YouTube video's won't play
BTW: nice bootlogo. Very smooth and subtile
Grtz,
John
Can't install, Error 7
Hi, great work but after trying several themes they are not working
Error Status7
gucio9377 said:
Can't install, Error 7
Click to expand...
Click to collapse
Please, be advised to change recovery for newest. I've used PhilzTouch6.59 and had not any problem with installation of ROM.
hello,
try many times to download but don't succeed
Up and running. Thank you tux!
Sent from my GT-P5110 using Tapatalk
Update: I have no audio. Viper installed properly but no video or touch or notification sounds on 5110, sorry to report.
Sent from my GT-P5110 using Tapatalk
Error code
Negative results, error code #65537. Unable to flash with latest TWRP 2.8.4.0 - P5110 recovery. Reverting back to: Dhollmen SlimROM based KitKat 4.4.4 - 2015/ 01/ 18. As always, thank you anyway!
Very nice!
I've flashed and tested this ROM for P5100.
Flashing was sucsessfully after CM11 without any problem. Tablet becames quicker and smoother.
Some problems:
1. Phone part does not work. But with SMS is everithing OK!
2. I had failure with disclosure of sattelits on GPS.
So, the Rom is very good! Thank you for great work!
I've flashed too the P5100 ROM
faorekh said:
1. Phone part does not work. But with SMS is everithing OK!
Click to expand...
Click to collapse
indeed, gives fc: com.android.incallui
Messages and USSD messages (like *100#) are working...
Good work:good:, will post back soon with more findings...
Very good rom ,good work, everysing work's great for me, tank you very much.
Sent from my GT-P5100 using XDA Premium HD app
No Sound
Installed twice (5110), no sound when playing music/movies. Music Player fails to play mp3 files. Any pointers?
John_Br said:
First hickup: YouTube video's won't play
BTW: nice bootlogo. Very smooth and subtile
Grtz,
John
Click to expand...
Click to collapse
wmwamidi said:
Installed twice, no sound when playing music/movies. Music Player fails to play mp3 files. Any pointers?
Click to expand...
Click to collapse
same for me
Also for me (p5110) no such of sound...all the rest is fine
wmwamidi said:
Installed twice (5110), no sound when playing music/movies. Music Player fails to play mp3 files. Any pointers?
Click to expand...
Click to collapse
I think this works for now!
Confirmed no sound on 5110. Looks like the audio.primary.default.so file in /system/lib/hw was omitted when compiling for 5110. Just for the heck of it, I downloaded the 5100 build and the .so file was present in that rom. So, I just took the audio.primary.default.so from the 5100 build and put it in the 5110 build, sound working fine now.
I archived the file in the 5110 zip, then flashed the rom but you can also push the file with a root file explorer. Just make sure to set proper permissions and then reboot for it to take effect.
BoroZG said:
I think this works for now!
Confirmed no sound on 5110. Looks like the audio.primary.default.so file in /system/lib/hw was omitted when compiling for 5110. Just for the heck of it, I downloaded the 5100 build and the .so file was present in that rom. So, I just took the audio.primary.default.so from the 5100 build and put it in the 5110 build, sound working fine now.
I archived the file in the 5110 zip, then flashed the rom but you can also push the file with a root file explorer. Just make sure to set proper permissions and then reboot for it to take effect.
Click to expand...
Click to collapse
Yes It works thanks
egystep said:
Yes It works thanks
Click to expand...
Click to collapse
Simple and smooth, it works perfectly only a small problem with the account on the new browser. Very well. Thank You
.
For all those who so kindly have tested this first beta: :good:
I've taken note of all comments and I am reviewing each and every one of them.
when I've prepared the corrections I'll upload a new version.
I'll try the beta status as short as possible.
:highfive:
I am part of the team for Ainur Sauron, and I am here to present improved audio on the Le Max 2. Sauron has a userconfig which can be adjusted. Download the latest from there and place the attached file at /sdcard before installing. Make sure to remove the '.txt' at the end of the file too! Enjoy :victory:
Impedance is currently set to 16Ω which can be changed to whatever you desire. To set edit the attached sauron_useroptions file and change qc.impedance to whatever your headphones impedance is in Ohms multiplied by 1000 (eg. for 22Ω it would be 22000).
Tested by @I_Raptor_I on his x2, if it doesn't work just send me a log
EDIT: Attached the file
I did not know that anyone else was using Ainur Sauron on LeX2 It really improves the audio quality significantly on Oreo!
Quick question - why does it say "Axon 7" during installation procedure?
LazerL0rd said:
I am part of the team for Ainur Sauron, and I am here to present improved audio on the Le Max 2. Sauron has a userconfig which can be adjusted. Download the latest from there and place the attached file at /sdcard before installing. Make sure to remove the '.txt' at the end of the file too! Enjoy :victory:
Impedance is currently set to 16Ω which can be changed to whatever you desire. To set edit the attached sauron_useroptions file and change qc.impedance to whatever your headphones impedance is in Ohms multiplied by 1000 (eg. for 22Ω it would be 22000).
Tested by @I_Raptor_I on his x2, if it doesn't work just send me a log
EDIT: Attached the file
Click to expand...
Click to collapse
Hi, I download and flash the version MK II but can't see any app for setting my personal audio. How it works?
GaetanoS.89 said:
Hi, I download and flash the version MK II but can't see any app for setting my personal audio. How it works?
Click to expand...
Click to collapse
Hello GaetanoS.89, first things first uninstall the MK II Magisk module. Now place the given text file in /sdcard folder, then go and flash that module again, it should state that it has detected the user options text file and that's it.
I_Raptor_I said:
Hello GaetanoS.89, first things first uninstall the MK II Magisk module. Now place the given text file in /sdcard folder, then go and flash that module again, it should state that it has detected the user options text file and that's it.
Click to expand...
Click to collapse
I have not installed magisk n the smartphone.
Can you tell me how I can uninstall it?
Do I need magisk to let work this audio mod?
Thanks
GaetanoS.89 said:
I have not installed magisk n the smartphone.
Can you tell me how I can uninstall it?
Do I need magisk to let work this audio mod?
Thanks
Click to expand...
Click to collapse
Magisk isn't needed as it'll install with any configuration. All you need to do is placed the attched file at /sdcard (called Internal Storage) and rename it to sauron_useroptions (remove the .txt. at the end).
LazerL0rd said:
Magisk isn't needed as it'll install with any configuration. All you need to do is placed the attched file at /sdcard (called Internal Storage) and rename it to sauron_useroptions (remove the .txt. at the end).
Click to expand...
Click to collapse
Did it, and after What I have to do?
@Lazerlord: I tried your mod today by described method.
I copied "sauron_useroptions" into sdcard folder by TWRP file explorer.
Afterwards I flashed latest zip (17.03.) using TWRP. Everything was fine with it during this.
Wiped chache and dalvik and rebooted without any problems.
Result: No ringtone anymore, no message sound, but media sound works fine and was adjustable, no app or menue occoured in regard to your mod. I did not check more.
I could succesfully remove your mod by described method (flash again same file from TWRP)
After removal everything was fine as before :good:
My Phone: X829 with latest AEX 8.1 using Magisk 16.0
123Bart said:
@Lazerlord: I tried your mod today by described method.
I copied "sauron_useroptions" into sdcard folder by TWRP file explorer.
Afterwards I flashed latest zip (17.03.) using TWRP. Everything was fine with it during this.
Wiped cache and dalvik and rebooted without any problems.
Result: No ringtone anymore, no message sound, but media sound works fine and was adjustable, no app or menue occoured in regard to your mod. I did not check more.
I could succesfully remove your mod by described method (flash again same file from TWRP)
After removal everything was fine as before :good:
My Phone: X829 with latest AEX 8.1 using Magisk 16.0
Click to expand...
Click to collapse
Ah, well could you follow these instructions on the main thread which say "help to extend features". It'll help us fix those issues. :good:
How was the media sound though? Did it sound better according to you?
LazerL0rd said:
Ah, well could you follow these instructions on the main thread which say "help to extend features". It'll help us fix those issues. :good:
How was the media sound though? Did it sound better according to you?
Click to expand...
Click to collapse
I removed the "sauron_useroptions" from sdcard folder (as it was described in the file itself, that UO is not mandatory) and reflashed the zip-file again.
With this way everything works !
Will read a little bit the instructions now...
Generaly I have to say I am using Leeco CDLA as headphones atm which are extraordinary by themselves.
So maybe I will use adapter for 3,5mm jack whithin next days and try some user options. Leeco Loadspeaker judgement is difficult imho.
Also new AEX is very good ROM in regard to speaker sound I have to say.
On Oreo 8.1.0. PixelRevenge 15.1 works very well in music playback. He gave me a strange problem. I removed the system camera that I can not install anymore. I had to put another one. I have not tried calls and notifications yet
edit:- Notifications and ringtones ok. In-call audio worsened, the voice is less clear. In speakerphone there is a loud hiss that makes the speakerphone unusable
RISS23 said:
On Oreo 8.1.0. PixelRevenge 15.1 works very well in music playback. He gave me a strange problem. I removed the system camera that I cannot install anymore. I had to put another one. I have not tried calls and notifications yet
edit:- Notifications and ringtones ok. In-call audio worsened, the voice is less clear. In speakerphone, there is a loud hiss that makes the speakerphone unusable
Click to expand...
Click to collapse
We're working on a fix for the mixer_paths that'll correct notifications, ringtones, and other audio. I'm happy that you're enjoying music playback. However, the system camera app problem is nothing to do with Sauron it's probably a ROM issue, or possibly even a Magisk issue.
I've installed this Mod by using Magisk 16.0 (v5.6.4) on RR 6.0(22-03-18).
Before I did this I placed the file sauron_useroptions to /sdcard folder.
During the installation Magisk showed that the useroption file was found and used for the installation.
In Poweramp I get the message that there is a problem with app native libraries (libampffmpeg.so).
I don't know whether the error message has something to do with that, but the volume control in Poweramp after flashing this modul is faulty.
Just when the volume is set the half I can hear anything. The volume control steps seems to be broken, but just in Poweramp.(After uninstalling, the issue is gone, but the error message is still sthere)
In other Apps the volume control is normal.
Since I use RR 6.0(8.1) instead of RR 5.8.5(7.1.2) the speaker sounds cheap tinny - Ainur Sauron didn't help to solve this issue. I removed AudioFX, can this be the reason?
It's difficult to describe the issue "cheap tinny", but I think the audio drivers have problems to divorce the difference frequences.
On RR 5.85. the speaker was more "smooth" and the frequences were divorced much better.
Sorry for my bad english and the critic. I think I'm an individual case and other people don't have the problems which I have, but in my case, the Mod seems not to improve the audio quality.
Azubi96 said:
I've installed this Mod by using Magisk 16.0 (v5.6.4) on RR 6.0(22-03-18).
Before I did this I placed the file sauron_useroptions to /sdcard folder.
During the installation Magisk showed that the useroption file was found and used for the installation.
In Poweramp I get the message that there is a problem with app native libraries (libampffmpeg.so).
I don't know whether the error message has something to do with that, but the volume control in Poweramp after flashing this modul is faulty.
Just when the volume is set the half I can hear anything. The volume control steps seems to be broken, but just in Poweramp.(After uninstalling, the issue is gone, but the error message is still sthere)
In other Apps the volume control is normal.
Since I use RR 6.0(8.1) instead of RR 5.8.5(7.1.2) the speaker sounds cheap tinny - Ainur Sauron didn't help to solve this issue. I removed AudioFX, can this be the reason?
It's difficult to describe the issue "cheap tinny", but I think the audio drivers have problems to divorce the difference frequences.
On RR 5.85. the speaker was more "smooth" and the frequences were divorced much better.
Sorry for my bad english and the critic. I think I'm an individual case and other people don't have the problems which I have, but in my case, the Mod seems not to improve the audio quality.
Click to expand...
Click to collapse
I've heard from @I_Raptor_I that RR already has a loss in audio quality. I advise the use of another ROM and if the tinnyness persists use the attached Sauron zip.
The Poweramp problem is probably due to DVC (Direct Volume Control) in their FAQ they state it may cause issues with 24-bit or HQ audio. The native libraries issue is not related to Ainur as it doesn't touch that file.
About the audio. ROM (which Sauron edits) isn't the only thing that contributes. the HAL and kernel do too, so RR's bad audio may not be able to be fixed or corrected by Ainur but we'll take a look into it.
Ok guys, @LazerL0rd is kindly developing a very nice Oreo kernel for our Le Max 2 improving the speeds dramatically and most importantly audio, he has already optimized our Qualcomm DSP, expect a very nice audio experience on Oreo from now on so stay tuned and make sure to thank LazerL0rd for his hard work, he doesn't even have a Le Max 2 and yet he is spending hours making this kernel for us
Magisk viper?
I have installed viper on RR Oreo via magisk and audio quality is now on point with how it worked through flashing viper and Dolby Atmos on the nugart RR via twrp. There are a couple of things to consider though, viper must be activated before listening to music through your app, viper does not work over Bluetooth by default in viper meaning you must go to viper settings and set mode to compatibility from normal and then viper will work over Bluetooth. The last thing, and I can't remember if this was true on nugart but viper seams to only work with music that you have downloaded to your device and will not work with streaming music from the web.
mikedavo said:
I have installed viper on RR Oreo via magisk and audio quality is now on point with how it worked through flashing viper and Dolby Atmos on the nugart RR via twrp. There are a couple of things to consider though, viper must be activated before listening to music through your app, viper does not work over Bluetooth by default in viper meaning you must go to viper settings and set mode to compatibility from normal and then viper will work over Bluetooth. The last thing, and I can't remember if this was true on nugart but viper seams to only work with music that you have downloaded to your device and will not work with streaming music from the web.
Click to expand...
Click to collapse
To fix streamed music install universal deep buffer remover magisk module by @Zackptg5 , it's on the repo too.
I_Raptor_I said:
Ok guys, @LazerL0rd is kindly developing a very nice Oreo kernel for our Le Max 2 improving the speeds dramatically and most importantly audio, he has already optimized our Qualcomm DSP, expect a very nice audio experience on Oreo from now on so stay tuned and make sure to thank LazerL0rd for his hard work, he doesn't even have a Le Max 2 and yet he is spending hours making this kernel for us
Click to expand...
Click to collapse
Kernel released and in Havoc OS. Source is https://github.com/Havoc-Devices/android_kernel_leeco_msm8996. I'll update personal repo and both to 3.18.108 soon.
does it work on xiaomi mi 6 miui 9? Android 8.0
Wysłane z mojego MI 6 przy użyciu Tapatalka
LazerL0rd said:
Kernel released and in Havoc OS. Source is https://github.com/Havoc-Devices/android_kernel_leeco_msm8996. I'll update personal repo and both to 3.18.108 soon.
Click to expand...
Click to collapse
waitting for the update, thanks
INTRODUCTION
*WARNING USE AT YOUR OWN RISKS*
Though the poco F1 has stereo speakers, the earpiece is sort of weak in comparison to bottom one and so the sound quality falls short when compared to other phones with dual speakers. With this guide, you can make your phone sound much balanced, immersive and better. Basically what it does is increase audio coming out from earpiece by using viper in combination with Dolby. Also this does not increases sound from earpiece beyond max level but instead reduces volume of bottom speaker slightly so it will not damage your speaker
REQUIREMENTS
Any custom rom with magisk and permissive SElinux
STEPS
1. Flash permissiver zip or use SElinux switcher to make SElinux permissive for Dolby module to work
2. Flash viper4a rootless zip in TWRP
3. Flash v4afx zip in magisk then reboot and test if Viper4A is successfully installed and working
4. Flash ACDB zip first in magisk then flash dolby audio zip and then reboot. You should now have moto audio app installed and working.
5. Put XHR WideFX irs file to main storage/Android/data/com.pittvandewitt.viperfx/files/Kernel
6. In Viper, enable convolver then choose the file to enable it.
7. For dolby, the default settings (smart audio) is great but personally I use film mode with surround sound and volume leveller enabled.
I have tested this in evolution X rom and it should work in other roms also. For stock rom it may require a custom kernel. If Dolby Atmos doesn't work then try Dolby Digital instead.
If you face issues like Dolby getting disabled automatically then heading to viper settings and switching Attach Audio Effects toggle or rebooting the system fixes it. If dolby app force closes then reflash it and clear catch after installation
DOWNLOAD
https://drive.google.com/folderview?id=1ublWcvZQ8QrQ0-uvMDlFTTEssLpcsoBC
its really sad there's no link :crying: hmmmm
new user not allowed to attach file / url original thread to their post ?
DOYANMAIN said:
its really sad there's no link :crying: hmmmm
new user not allowed to attach file / url original thread to their post ?
Click to expand...
Click to collapse
I updated the post with download link. XDA have a rule to not allow very new users from posting links or attachments. But by doing a few posts it allowed me to do so.
Geetesh Sonwani said:
STEPS
1. Install Audio Compability Patch first in magisk then reboot
Click to expand...
Click to collapse
Do you want to skip audio_policy patching? (Original acp before became 3in1 module)
Vol+ = yes, Vol- = no
Would you like to skip notification_helper remover?
Vol+ = yes, Vol- = no
Would you like to skip usb policy patching for usb dacs?
Vol+ = yes, Vol- = no
Should i skip this ? Or No ? Is this really matter ? because i really dont know what their usage for, so i just skip it
and also
on STEP 2, when i installing viper4a rootless in twrp it say done but i got red warning it say "unable to mount system"
so it is successfull or nah ? i confuse
i already installed v4afx via magisk ( STEP 3 ) and it working.
BUT
DOYANMAIN said:
on STEP 2, when i installing viper4a rootless in twrp it say done but i got red warning it say "unable to mount system"
Click to expand...
Click to collapse
It this thing ? should i ignore it since my viper4a working ?
DOYANMAIN said:
Do you want to skip audio_policy patching? (Original acp before became 3in1 module)
Vol+ = yes, Vol- = no
Would you like to skip notification_helper remover?
Vol+ = yes, Vol- = no
Would you like to skip usb policy patching for usb dacs?
Vol+ = yes, Vol- = no
Should i skip this ? Or No ? Is this really matter ? because i really dont know what their usage for, so i just skip it
and also
on STEP 2, when i installing viper4a rootless in twrp it say done but i got red warning it say "unable to mount system"
so it is successfull or nah ? i confuse
i already installed v4afx via magisk ( STEP 3 ) and it working.
BUT
It this thing ? should i ignore it since my viper4a working ?
Click to expand...
Click to collapse
On first choose no then select patch (new logic) then again choose no for notification helper and select remove volume listener library
Even if you skipped it wouldn't matter much because ACP is used just to fix audio not working in some apps and it does slightly enhances audio quality and volume.
For usb dac you can choose yes if you don't use wired headphones from usb c port
For viper though, you shouldn't get that warning
Maybe problem could be in your twrp
Manually mount system in twrp then try flashing again. If it didn't work you may have to reflash recovery
But you said that it is working? Did you tested the audio also? Because the magisk module only installs the app and some configs. The drivers are installed from recovery. You can also tap on the chip like icon button in viper and it should show the driver info and enabled as yes properly
Geetesh Sonwani said:
On first choose no then select patch (new logic) then again choose no for notification helper and select remove volume listener library
Even if you skipped it wouldn't matter much because ACP is used just to fix audio not working in some apps and it does slightly enhances audio quality and volume.
For usb dac you can choose yes if you don't use wired headphones from usb c port
For viper though, you shouldn't get that warning
Maybe problem could be in your twrp
Manually mount system in twrp then try flashing again. If it didn't work you may have to reflash recovery
But you said that it is working? Did you tested the audio also? Because the magisk module only installs the app and some configs. The drivers are installed from recovery. You can also tap on the chip like icon button in viper and it should show the driver info and enabled as yes properly
Click to expand...
Click to collapse
Yes even tho i got warning, but it properly working. I already use it like 6hour, all is working fine.
but when i installing Dolby Atmos, i got bootloop and force me to bootloader. but when restarting phone i can access twrp, just removing them in module via twrp everything is back normal.
but i think it doesnt support latest MIUI Global 11.0.4 ? i got stock MIUI11
Anyway, after wiping module via twrp my viper now doesnt have driver on the app. i already doing the exactly same step 1 - 3 to install viper and it didnt work rightnow. driver still doesnt work even tho i tried installing this many times.
I already go to viper4x thread, someone say need to overwrite 2 file ( post-fs-data.sh & sepolicy.rule ) but still doesnt fix driver.
maybe you know how to ? :laugh:
DOYANMAIN said:
Yes even tho i got warning, but it properly working. I already use it like 6hour, all is working fine.
but when i installing Dolby Atmos, i got bootloop and force me to bootloader. but when restarting phone i can access twrp, just removing them in module via twrp everything is back normal.
but i think it doesnt support latest MIUI Global 11.0.4 ? i got stock MIUI11
Anyway, after wiping module via twrp my viper now doesnt have driver on the app. i already doing the exactly same step 1 - 3 to install viper and it didnt work rightnow. driver still doesnt work even tho i tried installing this many times.
I already go to viper4x thread, someone say need to overwrite 2 file ( post-fs-data.sh & sepolicy.rule ) but still doesnt fix driver.
maybe you know how to ? :laugh:
Click to expand...
Click to collapse
Dolby Atmos is known to not work as of now in stock kernel or roms for many devices as it is still under development. You can try dolby digital instead
But are you getting the same error on twrp for viper? With system not mounting?
Unfortunately I don't have much idea for viper so I can help you till the limits of my knowledge only
Anybody make it work with Pixel Experience ROM 10.0'
Hi, I want to install it and I have Pixel Experience ROM 10.0 Official. I'm curious if anybody successfully instaled it on this ROM.
Thanks
Geetesh Sonwani said:
INTRODUCTION
Though the poco F1 has stereo speakers, the earpiece is kinda weak in comparison to bottom one and so it doesn't give that true stereo like audio performance (surround sound) compared to other phones with dual speakers. But with this guide, you can make your phone sound much balanced, immersive and better with Dolby Atmos and Viper. It actually feels like if the sound is coming towards you and not from the side
This requires the XHR WideFX irs. This is the only one I found till now which worked so perfectly with atmos after testing 500+ irs files.
REQUIREMENTS
Any android 9+ rom with magisk and permissive SElinux
STEPS
1. Install Audio Compability Patch first in magisk then reboot
2. Flash viper4a rootless zip in TWRP
3. Flash v4afx zip in magisk then again reboot and confirm if Viper4A is successfully installed and working
4. Flash Dolby Atmos zip file in magisk (you can download it from guitardedhero's post also for new version) and reboot. You should have both Dolby Atmos and Viper4A working at this point
5. Now to get that stereo sound effect, put XHR WideFX irs file in main storage/Viper4Android/Kernel folder
6. Open Viper and enable convolver then choose the same.
You can now test the sound and enjoy the stereo sound effect. It is best for gaming or while watching movies.
I have tested this in evolution X 4.0 rom and it should work in other roms also but I am not sure for OOS. For stock rom it may require a custom kernel. If it works in your rom then please comment down below so that others could also know it.
If you face issues regarding Dolby getting disabled automatically then heading to viper settings and switching Attach Audio Effects toggle or rebooting the system fixes it.
DOWNLOAD
https://drive.google.com/folderview?id=1E1ALAVIp82Cx36Dua1zCf8c5sWvt4z9m
Click to expand...
Click to collapse
puiocku said:
Hi, I want to install it and I have Pixel Experience ROM 10.0 Official. I'm curious if anybody successfully instaled it on this ROM.
Thanks
Click to expand...
Click to collapse
I have personally tested it in PE pie and Evo X 10 version. But this one should work in any android 10 based custom rom as long as you don't have any other audio mods installed conflicting it or else you may require AML also.
Geetesh Sonwani said:
I have personally tested it in PE pie and Evo X 10 version. But this one should work in any android 10 based custom rom as long as you don't have any other audio mods installed conflicting it or else you may require AML also.
Click to expand...
Click to collapse
Thank you, in that case I think too that should work fine with Pixel Experience 10.0 ROM.
Cheers
DOYANMAIN said:
Yes even tho i got warning, but it properly working. I already use it like 6hour, all is working fine.
but when i installing Dolby Atmos, i got bootloop and force me to bootloader. but when restarting phone i can access twrp, just removing them in module via twrp everything is back normal.
but i think it doesnt support latest MIUI Global 11.0.4 ? i got stock MIUI11
Anyway, after wiping module via twrp my viper now doesnt have driver on the app. i already doing the exactly same step 1 - 3 to install viper and it didnt work rightnow. driver still doesnt work even tho i tried installing this many times.
I already go to viper4x thread, someone say need to overwrite 2 file ( post-fs-data.sh & sepolicy.rule ) but still doesnt fix driver.
maybe you know how to ? :laugh:
Click to expand...
Click to collapse
+1.
Viper is working fine but after installing Dolby Atmos and rebooting i am stuck at Fastboot, had to remove the dolby module.
Is this related to Miui 11 or some selinux problem??
Please suggest some workaround.
Will this work on miui 11?
Ravindrasan said:
+1.
Viper is working fine but after installing Dolby Atmos and rebooting i am stuck at Fastboot, had to remove the dolby module.
Is this related to Miui 11 or some selinux problem??
Please suggest some workaround.
Click to expand...
Click to collapse
Looks like it doesn't work in miui as of now
But you can try dolby digital instead which is also good. Dolby Atmos is still like an early release and currently only works in custom roms and kernels
But remember to choose the IRS file in viper. That makes the earpiece work more balanced. Dolby is just to further enhance the sound quality.
Geetesh Sonwani said:
Looks like it doesn't work in miui as of now
But you can try dolby digital instead which is also good. Dolby Atmos is still like an early release and currently only works in custom roms and kernels
But remember to choose the IRS file in viper. That makes the earpiece work more balanced. Dolby is just to further enhance the sound quality.
Click to expand...
Click to collapse
Same is happening in Evolution X I'm stuck at bootloader..
It's not even working in a custom rom.
Works perfectly with Pixel Experience (Android9) + No Gravity Karnel.
Thank you, so wonderful!
Thanks for stereo convolver file, but dolby atmos giving bootloop on miui 11.0.6 android 10
I'm running Pixel Experience Plus Android 10 on my poco. I've managed to get V4A to work but when I flash Dolby Atmos and reboot the device and try to open it nothing happens and after some time and after 10-15 attempts of trying to open it a crash message appears. I also tried installing Dolby Digital Plus for Android Q but that crashes as well
naziraaqib3k said:
I'm running Pixel Experience Plus Android 10 on my poco. I've managed to get V4A to work but when I flash Dolby Atmos and reboot the device and try to open it nothing happens and after some time and after 10-15 attempts of trying to open it a crash message appears. I also tried installing Dolby Digital Plus for Android Q but that crashes as well
Click to expand...
Click to collapse
Make sure that SELinux is permissive as they will not work in enforcing
Flash permissiver zip file to fix it
I am also currently on PE+ latest and have not encountered any such issues
My recommendation is use Dolby digital instead as it is more stable (v7.2)
Geetesh Sonwani said:
Make sure that SELinux is permissive as they will not work in enforcing
Flash permissiver zip file to fix it
I am also currently on PE+ latest and have not encountered any such issues
My recommendation is use Dolby digital instead as it is more stable (v7.2)
Click to expand...
Click to collapse
I've used this setup on miui 11 eu version and it ran just fine also I had already set SELinux to Permissive uaing the SELinux Switcher. Also can you provide me with the link to dolby digital link. Thank you for your help.
naziraaqib3k said:
I've used this setup on miui 11 eu version and it ran just fine also I had already set SELinux to Permissive uaing the SELinux Switcher. Also can you provide me with the link to dolby digital link. Thank you for your help.
Click to expand...
Click to collapse
Here is the original thread -
https://forum.xda-developers.com/android/software/mm-p-dolby-digital-plus-arise-20181115-t3868192/amp/
hey guys want to write this guide to show you steps and fixes to get Android 10 working good on our dead htc u11+ (working with both QuackPhh and Havoc releases from treble project)
1. flash stock PIE rom, you can find it here: https://androidfilehost.com/?w=search&s=2Q4DIMG you must flash it from download mode by placing the .zip inside SD card after preparing it with RUU Decryption Tool.
2. install TWRP (this version: https://github.com/sabpprook/androi...es/download/0.0.1/twrp-3.3.1-0-ocm_190501.img ) with fastboot using this command: fastboot flash recovery XXX.img (where XXX.img is name of twrp image you just downloaded)
3. inside TWRP wipe data, system, dalvik cache
4. download Havoc 3.5 rom here: https://sourceforge.net/projects/ha...ficial-arm64-aonly-gapps-nosu.img.xz/download (if you want to choose another rom you can, just check is variant ARM64 A-Only) then place it on SD card and flash from TWRP (don't reboot)
5. download PhhMagisk here: https://drive.google.com/file/d/1ZgYuaN-sklg0ycDue08WtKsMFmzWsI6F/view (standard magisk won't work) then place it on SD card and flash from TWRP (don't reboot)
6. inside TWRP go to wipe -> system -> resize file system (do this 2 times as at first try you will get error)
7. reboot
8. rom is now booting and working.
FIXES:
-for better camera quality i suggest you to download this GCam version: https://f.celsoazevedo.com/file/cfiles/gcm1/GCam_7.3.018_Urnyx05-v1.7-fix.apk and then go to Phh Treble Settings -> Qualcomm features and tick Use alternate camera profile (this will make phone recording video at correct quality 1080p/4k)
-to make earpiece audio during call and bluetooth multimedia audio working you must place the 3 files included in htc_audio_bt_fix.rar i attached inside /root/vendor/etc and be sure to set permissions properly (look how permissions are set in original files before replacing, you can use Root Explorer or any other file browser with root support that allow to check and edit permissions) then you must disable from the paired bluetooth device Call Audio
now you have a working android 10 htc u11+ :victory::victory: i am using it as daily rom... you will love android 10!
only bugs i faced at the moment are:
- bluetooth audio not working with calls
- some rare freezes after unlocking phone from lockscreen
I keep getting stuck on ROM loading screen, I try reflashing the havoc os system image, then PhhMagisk, but still no luck!
I had to follow this guide all the way from the start and got the phone to boot, but once I copied the htc_audio_bt_fix.rar files to /vendor/etc/ and edited its permissions and rebooted the phone and stuck at the loading screen all over again :/
Now I have the phone running but no luck with any sound on my bluetooth earphones
I have placed the rar files as stated and the permissions are exactly as the files before had them rw--r--r, for all 3 of them.
Does the quack build support Bluetooth audio calls? I don't want to go back to pie, anyone know a working GSI Android 10 for the U11+ with BT call support?
Slok 00 said:
hey guys want to write this guide to show you steps and fixes to get Android 10 working good on our dead htc u11+ (working with both QuackPhh and Havoc releases from treble project)
1. flash stock PIE rom, you can find it here: https://androidfilehost.com/?w=search&s=2Q4DIMG you must flash it from download mode by placing the .zip inside SD card after preparing it with RUU Decryption Tool.
2. install TWRP (this version: https://github.com/sabpprook/androi...es/download/0.0.1/twrp-3.3.1-0-ocm_190501.img ) with fastboot using this command: fastboot flash recovery XXX.img (where XXX.img is name of twrp image you just downloaded)
3. inside TWRP wipe data, system, dalvik cache
4. download Havoc 3.5 rom here: https://sourceforge.net/projects/ha...ficial-arm64-aonly-gapps-nosu.img.xz/download (if you want to choose another rom you can, just check is variant ARM64 A-Only) then place it on SD card and flash from TWRP (don't reboot)
5. download PhhMagisk here: https://drive.google.com/file/d/1ZgYuaN-sklg0ycDue08WtKsMFmzWsI6F/view (standard magisk won't work) then place it on SD card and flash from TWRP (don't reboot)
6. inside TWRP go to wipe -> system -> resize file system (do this 2 times as at first try you will get error)
7. reboot
8. rom is now booting and working.
FIXES:
-for better camera quality i suggest you to download this GCam version: https://f.celsoazevedo.com/file/cfiles/gcm1/GCam_7.3.018_Urnyx05-v1.7-fix.apk and then go to Phh Treble Settings -> Qualcomm features and tick Use alternate camera profile (this will make phone recording video at correct quality 1080p/4k)
-to make earpiece audio during call and bluetooth multimedia audio working you must place the 3 files included in htc_audio_bt_fix.rar i attached inside /root/vendor/etc and be sure to set permissions properly (look how permissions are set in original files before replacing, you can use Root Explorer or any other file browser with root support that allow to check and edit permissions) then you must disable from the paired bluetooth device Call Audio
now you have a working android 10 htc u11+ :victory::victory: i am using it as daily rom... you will love android 10!
only bugs i faced at the moment are:
- bluetooth audio not working with calls
- some rare freezes after unlocking phone from lockscreen
Click to expand...
Click to collapse
So I have asked at the relevant threads regarding any word on when a bluetooth fix should be expected, but do you by any chance have any idea about that?
Because I have to decide whether to wait (if the fix maybe right around the corner or smth) or revert back to a stable pie build.
usmantahir said:
So I have asked at the relevant threads regarding any word on when a bluetooth fix should be expected, but do you by any chance have any idea about that?
Because I have to decide whether to wait (if the fix maybe right around the corner or smth) or revert back to a stable pie build.
Click to expand...
Click to collapse
unfortunately bt call audio isn't working atm only multimedia audio works... try playing with bluetooth workaround option inside treeble settings-> misc but i don't know if you will solve it
Slok 00 said:
unfortunately bt call audio isn't working atm only multimedia audio works... try playing with bluetooth workaround option inside treeble settings-> misc but i don't know if you will solve it
Click to expand...
Click to collapse
That's a bummer, I guess I'll revert to pie, i tried flashing Havoc (pie) to my phone for a change, it just wont flash. Error 255. It's been a day of disappointments :crying:
usmantahir said:
That's a bummer, I guess I'll revert to pie, i tried flashing Havoc (pie) to my phone for a change, it just wont flash. Error 255. It's been a day of disappointments :crying:
Click to expand...
Click to collapse
man i am using havoc 3.5 and i am loving it, far better than pie htc rom that is too old now
Slok 00 said:
man i am using havoc 3.5 and i am loving it, far better than pie htc rom that is too old now
Click to expand...
Click to collapse
It really is great! Too bad about the Bluetooth bug! I spend hours on-call, and I just cant go back to holding my phone to my ear :/
usmantahir said:
It really is great! Too bad about the Bluetooth bug! I spend hours on-call, and I just cant go back to holding my phone to my ear :/
Click to expand...
Click to collapse
yes i got your point, try contact phhusson (quack phh creator) is a very good guy maybe it can help you
Slok 00 said:
yes i got your point, try contact phhusson (quack phh creator) is a very good guy maybe it can help you
Click to expand...
Click to collapse
Great idea! I'll find him and hit him up. I'll post here and let you guys know if it works for me.
Hey, this is great news for me, but there's one, very important question - is there a way to use Edge Sense with this? I've seen some Magisk module re-activating the analogue feature on modded Pixels, but I haven't seen anything like that for HTC - could that work? I use Edge Sense regularly and losing it would stop me from any modding.
I downloaded the stock PIE rom from the URL provided by you, and decrypt it by RUU Decryption Tool. And now I got some img files inside two folders - firmware and system.
But then how to convert them into zip file so that I can place it inside SD card? Can you tell me in details? Sorry I'm a newbie in flashing roms.
openopentw said:
I downloaded the stock PIE rom from the URL provided by you, and decrypt it by RUU Decryption Tool. And now I got some img files inside two folders - firmware and system.
But then how to convert them into zip file so that I can place it inside SD card? Can you tell me in details? Sorry I'm a newbie in flashing roms.
Click to expand...
Click to collapse
I flashed the boot.img and system.img by fastboot into my phone instead of placing some zip into SD card, and followed the remaining steps including fixes. Now my phone is working!
However my phone can not recognize if I have plugged in the earphone or not, and of course no sound from earphone. Do you guys have any suggestions about it? Maybe I should flashed vendor.img in the first step as well?
openopentw said:
I flashed the boot.img and system.img by fastboot into my phone instead of placing some zip into SD card, and followed the remaining steps including fixes. Now my phone is working!
However my phone can not recognize if I have plugged in the earphone or not, and of course no sound from earphone. Do you guys have any suggestions about it? Maybe I should flashed vendor.img in the first step as well?
Click to expand...
Click to collapse
Flashing the vendor.img would change nothing, it is the same as it was before. The fix for earphone audio has been in the post for a long time, but there is no fix for using earphones/headphones.
Did you find the earpiece speaker fix?
---------- Post added at 03:52 PM ---------- Previous post was at 03:46 PM ----------
This is incredible, I've been following phhuson's Treble GSI development for 2 years now hoping that someone would find a fix for the earpiece speaker during calls.
I tried doing everything at once and got a bootloop, but then I tried every step separately and after a few days my U11+ is working great!
How long did it take you to find that GCam port? I've been using Arnova's for ages and could never find a good one for the U11+ before trying the one you've linked.
I'm really glad we got the earpiece fix, the U11+ still has really great hardware and the poorly made Android Pie port and old security patch was tempting me to upgrade to something new. Now I think I can hold onto it for an extra year.
My camera doesn't work...
After enable "Use alternate camera profile" then reboot , it still not working....
Is there any solution?
Please help me , camera is really important to me...
Pineapplemilk said:
My camera doesn't work...
After enable "Use alternate camera profile" then reboot , it still not working....
Is there any solution?
Please help me , camera is really important to me...
Click to expand...
Click to collapse
What's your vendor version?
I use Android Pie vendor with Havoc OS 3.7 work fine.
Maybe you should flash Pie RUU first then install the Havoc OS.
---------- Post added at 10:51 PM ---------- Previous post was at 10:41 PM ----------
Here is the way to use Edge Sense with Havoc OS.
1. Install com.htc.sense.edgesensorservice.apk (Resigned with Havoc OS keystore)
2. Install App Systemizer in Magisk
3. Systemize EdgeSensorService
4. Reboot
Now Edge Sense work fine.
And if you want to setup Edge Sense, open terminal
Code:
su
am start com.htc.sense.edgesensorservice/.ui.SettingsMainActivity
Recommended to use Edge Sense Plus to manage it so you don't need to setup in this dirty(?) way every time.
james35022000 said:
What's your vendor version?
I use Android Pie vendor with Havoc OS 3.7 work fine.
Maybe you should flash Pie RUU first then install the Havoc OS.
Click to expand...
Click to collapse
I flashed 2.15.709.1 Pie Ruu before install the "Phh AOSP Android 10"
(Havoc based on Phh)
TWRP Version : 190501
And it still can't encrypt data
Pineapplemilk said:
I flashed 2.15.709.1 Pie Ruu before install the "Phh AOSP Android 10"
(Havoc based on Phh)
TWRP Version : 190501
And it still can't encrypt data
Click to expand...
Click to collapse
Oh TWRP can't decrypt data is normal.
The thing you can do is to prevent system from encrypting data.
This thread:
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
Just wipe data in TWRP and flash the zip file upon
---------------------------------------------------------------------
And wait, I see XDDD
I flashed Phh AOSP before, the camera don't work neither.
You can find the issue on the Phh's github, it seems never work and no fix for our device.
So....please use Havoc OS
james35022000 said:
Oh TWRP can't decrypt data is normal.
The thing you can do is to prevent system from encrypting data.
This thread:
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
Just wipe data in TWRP and flash the zip file upon
Click to expand...
Click to collapse
Thank you for this information :good:
---------------------------------------------------------------------
james35022000 said:
And wait, I see XDDD
I flashed Phh AOSP before, the camera don't work neither.
You can find the issue on the Phh's github, it seems never work and no fix for our device.
So....please use Havoc OS
Click to expand...
Click to collapse
Really strange.....
Thank you for the information again~
Does Havoc os running smooth on U11+?
Phh AOSP has some bugs but it's smooth tho.
Pineapplemilk said:
Does Havoc os running smooth on U11+?
Phh AOSP has some bugs but it's smooth tho.
Click to expand...
Click to collapse
It runs smooth for me, but for the first week I kept crashing at the lock screen randomly and had to do a reset. Sometimes a normal reset would just bootloop or crash on the lockscreen again. So I had to specifically go into download mode -> bootloader mode -> recovery mode (TWRP) -> "reboot to system" which would let me get past the lockscreen without crashing.
The battery life and thermal performance is MUCH better, it's too early for me to say but I think it's pretty close to Oreo battery life and heat management might be EVEN BETTER.
I still think that HTC Oreo was smoother, but most phones weren't as smooth as the U11+ on Oreo.
The camera performance is definitely worse though, that could just be because we're forced to use the GCam port instead of the stock HTC app but it's inconsistent with lighting and sometimes crushes black levels on people's faces too much. If I find improved settings or a better GCam port then I'll link it here for you guys to use
I'm pretty sure that TWRP not being able to decrypt data is a bug with that specific version of TWRP, but I don't think there's another TWRP image that will work on the U11+ so we have to deal with it.
---------- Post added at 07:24 PM ---------- Previous post was at 07:12 PM ----------
james35022000 said:
What's your vendor version?
I use Android Pie vendor with Havoc OS 3.7 work fine.
Maybe you should flash Pie RUU first then install the Havoc OS.
---------- Post added at 10:51 PM ---------- Previous post was at 10:41 PM ----------
Here is the way to use Edge Sense with Havoc OS.
1. Install com.htc.sense.edgesensorservice.apk (Resigned with Havoc OS keystore)
2. Install App Systemizer in Magisk
3. Systemize EdgeSensorService
4. Reboot
Now Edge Sense work fine.
And if you want to setup Edge Sense, open terminal
Code:
su
am start com.htc.sense.edgesensorservice/.ui.SettingsMainActivity
Recommended to use Edge Sense Plus to manage it so you don't need to setup in this dirty(?) way every time.
Click to expand...
Click to collapse
How do you do step 1? I couldn't find any information about where to find the HavocOS Keystore or what it is? I assume it's an app to resign APKs for HavocOS?
Thanks for helping an ignorant person like me