Database Info

How to unbrick HTC One with ruu

So this is my first post, and I have a problem with bricked HOX.
I tried to put custom ROM, ViperX, with CWM (previously I unlocked bootloader and flashed with custom CWM recovery.img). After installation, I flashed with boot.img, but I couldn't boot. Now I have bricked, unlocked, HOX. I tried to unbrick with ruu, but ruu warned that my bootloader version is not good for ruu.
So how can I unbrick my HOX, is there ruu version for my HOX (and is there any way to unbrick it at all?)?
My HOX's specs:
CID: HTC__032
version-main: 3.20.401.3
HBOOT-1.39.0000
RADIO-5.1204.162A.29
Please help, and sorry for my bad English. I hope you understood

retsamor said:
So this is my first post, and I have a problem with bricked HOX.
I tried to put custom ROM, ViperX, with CWM (previously I unlocked bootloader and flashed with custom CWM recovery.img). After installation, I flashed with boot.img, but I couldn't boot. Now I have bricked, unlocked, HOX. I tried to unbrick with ruu, but ruu warned that my bootloader version is not good for ruu.
So how can I unbrick my HOX, is there ruu version for my HOX (and is there any way to unbrick it at all?)?
My HOX's specs:
CID: HTC__032
version-main: 3.20.401.3
HBOOT-1.39.0000
RADIO-5.1204.162A.29
Please help, and sorry for my bad English. I hope you understood
Click to expand...
Click to collapse
Wrong forum, this is for dual core. You'll wanna go here http://forum.xda-developers.com/forumdisplay.php?f=1533

RollTribe said:
Wrong forum, this is for dual core. You'll wanna go here http://forum.xda-developers.com/forumdisplay.php?f=1533
Click to expand...
Click to collapse
Thanks for for warning me.
Yes, I figured it later, so I posted in HTC One X forum.
Can somebody please remove this thread?

HTC ONE 802W Bricked
Hallo, I have the htc one 802W dual sim variant. It has HTC_802w_CWM_recovery_6.0.3.3_PhilZ_Touch_5 recovery & s-off, and the european rom version. PN07IMG_M7C_DUG_JB_50_S1_HTC_Europe_2.19.401.1_Radio_1237.21.28.0627_release_326125
My problem begins when I try to change model ID to flash the new 4.4.2 version, in the process it bricks and now is black screen, no led charging, but PC recognizes it when I connect by USB cable.
The fastboot getvar all is:
C:\SDK Android\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.39.2000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: (IMEI deleted for privacy reasons, but is OK)
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3445mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: 080b6f61
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
C:\SDK Android\sdk\platform-tools>
I understand the English better than I write it, so I appreciate any help. A greeting.

asustekk said:
Hallo, I have the htc one 802W dual sim variant. It has HTC_802w_CWM_recovery_6.0.3.3_PhilZ_Touch_5 recovery & s-off, and the european rom version. PN07IMG_M7C_DUG_JB_50_S1_HTC_Europe_2.19.401.1_Radio_1237.21.28.0627_release_326125
My problem begins when I try to change model ID to flash the new 4.4.2 version, in the process it bricks and now is black screen, no led charging, but PC recognizes it when I connect by USB cable.
The fastboot getvar all is:
C:\SDK Android\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.39.2000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: (IMEI deleted for privacy reasons, but is OK)
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3445mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: 080b6f61
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
C:\SDK Android\sdk\platform-tools>
I understand the English better than I write it, so I appreciate any help. A greeting.
Click to expand...
Click to collapse
Unfortunately you're in the wrong device forum, this is the HTC One XL form. You need to ask in your own device forum, the people there are experienced with your phone and will be able to help you.
Sent from my Evita

Sorry I post it in the correct forum, can somebody delete this? thanks in advance.
timmaaa said:
Unfortunately you're in the wrong device forum, this is the HTC One XL form. You need to ask in your own device forum, the people there are experienced with your phone and will be able to help you.
Sent from my Evita
Click to expand...
Click to collapse

[Q] trouble with my htc one x rogers

hello, ive got this rogers htc one x that is stuck in a bootloader loop, anyway heres my info i really need help with this:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.14.0000
(bootloader) version-baseband: 0.23a.32.09.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.631.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT24DW307580
(bootloader) imei:
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3706mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-97c9a06e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 1.031s
C:\adb>
actually its stuck in qhusb_dload

How did it get in this state?
Can you not get to bootloader?

slickwidnick said:
hello, ive got this rogers htc one x that is stuck in a bootloader loop, anyway heres my info i really need help with this:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.14.0000
(bootloader) version-baseband: 0.23a.32.09.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.631.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT24DW307580
(bootloader) imei: 32
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3706mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-97c9a06e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 1.031s
C:\adb>
actually its stuck in qhusb_dload
Click to expand...
Click to collapse
well now ive managed to mess around and got aokp_evita-rohan-milestone6.4 rom loaded on my phone, but its stuck in a boot loop at the boot animation... ahhh, this is frustrating.....

How did you get it out of QHSUSB_DLOAD mode? You're s-on so you probably just need to flash the boot.img from the ROM zip via fastboot to get it to boot.
Sent from my Evita

timmaaa said:
How did you get it out of QHSUSB_DLOAD mode? You're s-on so you probably just need to flash the boot.img from the ROM zip via fastboot to get it to boot.
Sent from my Evita
Click to expand...
Click to collapse
just tried flashing the boot.img from the rom twice to make sure and it still bootloops at the boot animation...
and for how i ended up getting it off of qhusb_dload, i just downloaded all of what i could find for the rogers htc on x and tried flashing this, flashing that, and i dont really know exactly what it was that kicked it out of that mode...
im still confused as to why it wont boot after flashing the boot.img from the rom..

While "flashing this and that" has gotten you out of trouble this time I wouldn't suggest doing that again in the future, it was likely a huge fluke and flashing random things is a pretty bad idea. What ROM are you trying to flash?
Sent from my Evita

timmaaa said:
While "flashing this and that" has gotten you out of trouble this time I wouldn't suggest doing that again in the future, it was likely a huge fluke and flashing random things is a pretty bad idea. What ROM are you trying to flash?
Sent from my Evita
Click to expand...
Click to collapse
well originally i was trying to flash i think it was eragon and i got as far as flashing boot.img and then the rom wouldnt flash. now i have aokp_evita-rohan-milestone6.4 rom loaded but it bootloops.
should i try to flash another rom and keep trying till i find one that will startup?

What is eragon? If that's a ROM you've flashed a ROM that isn't for this device, no such ROM exists for the Evita (HTC One XL / AT&T One X). You're lucky you didn't brick your phone. Have a look through our development sections which you'll find here:
http://forum.xda-developers.com/forumdisplay.php?f=1541
http://forum.xda-developers.com/forumdisplay.php?f=1726
Don't ever download ROMs from anywhere except within those two development sections or you're on a dangerous road to phone bricking land. Find a ROM you think you'll like, read the OP, make sure you meet any requirements it lists prior to flashing, and flash it.
PS. You should really remove your IMEI number from your first post, and the other post where you quoted it. Don't ever post your IMEI publicly.
Sent from my Evita

Need RUU please help!

Hello folks,
Please i need someone to help me with this specific RUU ASAP.
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.50.05.31_10.30.50.08L_release_309489_signed_ICS_2
I have a paperweight and i guess without this RUU, my phone will continue to be one. Please help!!!
Thanks in advance

Lj jnr said:
Hello folks,
Please i need someone to help me with this specific RUU ASAP.
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.50.05.31_10.30.50.08L_release_309489_signed_ICS_2
I have a paperweight and i guess without this RUU, my phone will continue to be one. Please help!!!
Thanks in advance
Click to expand...
Click to collapse
http://www.androidruu.com/?developer=Ville
Go there, it's there. I just checked.

DRUMROT said:
http://www.androidruu.com/?developer=Ville
Go there, it's there. I just checked.
Click to expand...
Click to collapse
Yes, that was the link given to me yesterday but after i checked it with MD5, it doesnt match the code. Its like it corrupted and when i try to use it. It say s(CODE 155: unknown error)

Lj jnr said:
Yes, that was the link given to me yesterday but after i checked it with MD5, it doesnt match the code. Its like it corrupted and when i try to use it. It say s(CODE 155: unknown error)
Click to expand...
Click to collapse
Oh, that stinks then, haha.
If you super cid you can run any RUU. If that helps.

DRUMROT said:
Oh, that stinks then, haha.
If you super cid you can run any RUU. If that helps.
Click to expand...
Click to collapse
I dont know how to Supercid. Please help

help in downgrading
i have bought a used htc one s and it had sense 5.5 based JB4.2.2 rom but i want to downgrade to stock firmware. kindly tell me which RUU i should use and how should i procede.
HBOOT shows tampered, unlocked and S-ON
and here is other details
Code:
sudo fastboot getvar all
[sudo] password for hasan:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: S
(bootloader) imei: 35
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: VODAP304
(bootloader) battery-status: good
(bootloader) battery-voltage: 4111mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.061s
I tried RUU RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4 on windows 8.1 64bit but it is not detecting the phone at all
currently I am on linux so i hope you guys can suggest something relevant
thanks a lot

Can't find correct HTC One m7ul RUU.exe HELP

Hello, I'm located in Ontario Canada, with Telus and I need to return my rooted HTC One m7 back to HTC (through Telus) for warranty repairs due to a faulty top speaker and phone mic.
Every RUU.exe I try fails with "error 158" and I've tryed even with S-OFF and a whole bunch of other crap....
Basically here's my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.661.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If anyone can grab me the correct RUU.exe I would even pay you via PayPal.
I'm desperate as my warranty ends April 28th 2014
Or just get me back to stock where I can OTA update and it would be "LOCKED" "S-ON" and no "Security Warning"/"TAMPERED" in the boot-loader.
Currently running Android Revolution HD Version 62.0 <-- love by the way.
Currently have "TAMPERED" "UNLOCKED" "S-ON"

sarktheshark said:
Hello, I'm located in Ontario Canada, with Telus and I need to return my rooted HTC One m7 back to HTC (through Telus) for warranty repairs due to a faulty top speaker and phone mic.
Every RUU.exe I try fails with "error 158" and I've tryed even with S-OFF and a whole bunch of other crap....
Basically here's my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.661.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If anyone can grab me the correct RUU.exe I would even pay you via PayPal.
I'm desperate as my warranty ends April 28th 2014
Or just get me back to stock where I can OTA update and it would be "LOCKED" "S-ON" and no "Security Warning"/"TAMPERED" in the boot-loader.
Currently running Android Revolution HD Version 62.0 <-- love by the way.
Currently have "TAMPERED" "UNLOCKED" "S-ON"
Click to expand...
Click to collapse
Thats easy --> LINK

LS.xD said:
Thats easy --> LINK
Click to expand...
Click to collapse
Yeah it didn't work
Here are some pics:

sarktheshark said:
Yeah it didn't work
Here are some pics:
Click to expand...
Click to collapse
If you want a fast solution install Teamviewer and i'll fix it.
If you want it on your own:
-flash stock recovery contained in the RUU before installing RUU
-relock bootloader
-uninstall HTC Sync and all other software affecting USB connection, Samsung KIES and so on
-check if device is shown up in device manager correctly
-run RUU as admin
-close running adb instances
-...
It will work if you do right as its the 100% matching RUU for your device/firmware

LS.xD said:
If you want a fast solution install Teamviewer and i'll fix it.
If you want it on your own:
-flash stock recovery contained in the RUU before installing RUU
-relock bootloader
-uninstall HTC Sync and all other software affecting USB connection, Samsung KIES and so on
-check if device is shown up in device manager correctly
-run RUU as admin
-close running adb instances
-...
It will work if you do right as its the 100% matching RUU for your device/firmware
Click to expand...
Click to collapse
What is teamviewer?
Will you have access to my pc?

sarktheshark said:
What is teamviewer?
Will you have access to my pc?
Click to expand...
Click to collapse
You got it No matter if you don't like to. Just check all points i posted recently and it should work

LS.xD said:
You got it No matter if you don't like to. Just check all points i posted recently and it should work
Click to expand...
Click to collapse
Ok so can you do these easily via teamviewer?

sarktheshark said:
Ok so can you do these easily via teamviewer?
Click to expand...
Click to collapse
Think so After installing it you get a id+password. thats needed to connect. Just fixed a m7 this way some hours ago.

LS.xD said:
Think so After installing it you get a id+password. thats needed to connect. Just fixed a m7 this way some hours ago.
Click to expand...
Click to collapse
Ok, I'll pm u

sarktheshark said:
Ok, I'll pm u
Click to expand...
Click to collapse
You can read it here --> LINK

Can we proceed?
Sent from my beloved HTC One S using (most time buggy) Tapatalk

htc one m7_ul
LS.xD said:
Can we proceed?
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
pls help! im stuck on HTC screen on my htc one after i flash ARHD 62.,any help would be appreciated much...thanks!

josemanuelvalles28 said:
pls help! im stuck on HTC screen on my htc one after i flash ARHD 62.,any help would be appreciated much...thanks!
Click to expand...
Click to collapse
Solved?

I can't find RUU file
LS.xD said:
Solved?
Click to expand...
Click to collapse
Can you help me? I also can't find RUU file for my HTC. And can you give me some instruction how to use correctly RUU ??
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.26.3263.05
version-cpld: None
version-microp: None
version-main: 4.24.69.5
version-misc: PVT SHIP S-ON
serialno: FA382W903337
imei: ----------------
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: ORANGB10
battery-status: good
battery-voltage: 4266mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-660ef031
hbootpreupdate: 11
gencheckpt: 0
I have unlock bootloader, S-ON and TAMPERED flag
I have problem with vibractions and i would like to send my phone for warrant
Please help me

[Q] How do I unbrick my device? Please help!

Hi I just wanted to try the Maximus HD 10 and thought I did what was expected but something went wrong and now the phone is totally blank.. I am new to this but read alot in this forum before I began and I am used to computers etc. so I gave it a shot.. This is what I did:
Installed the Windroid Universal Toolkit to unlock the phone, and that went well. Then followed the instructions to install the Maximus HD 10 which also went well until I had to install the newer firmware.. From here things went really bad and after a lot of different wipes and things that I don't know anything about I am stuck with an useless device
I have searched all forums (I think) but with no luck, so if anyone know what I should do I would be really thankful.
And no.. I do not have a backup!!
This is the Fastboot Getvar All:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXX
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4111mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Fastboot can communicate with the phone but ADB devices will not find the phone.
If I reboot the phone I only see the HTC start screen for a few seconds and then nothing.. It has TWRP on it which I can enter.
Please help me!

If you have TWRP you might download any ROM and flash it but since you're S-On don't forget to flash kernel in fastboot mode after you flash the ROM.
Kernel is the boot.img file on the root of the ROM zip. Extract it to PC and while in fastboot issue the "fastboot flash boot boot.img" command.
For changing firmware you need S-Off which you don't have. To gain it you should flash first a close to stock ROM (like Viper for ex) then try to gain S-Off with rumrunner or another method. Then you can flash firmwares
Sent from nowhere over the air...

Hi Rapier, thank you so much for your help. Now it's working again

Claus71 said:
Hi Rapier, thank you so much for your help. Now it's working again
Click to expand...
Click to collapse
Don't forget to do that after every ROM flash. If you'll get S-Off, you won't need to do that anymore
Sent from nowhere over the air...