Hi I just wanted to try the Maximus HD 10 and thought I did what was expected but something went wrong and now the phone is totally blank.. I am new to this but read alot in this forum before I began and I am used to computers etc. so I gave it a shot.. This is what I did:
Installed the Windroid Universal Toolkit to unlock the phone, and that went well. Then followed the instructions to install the Maximus HD 10 which also went well until I had to install the newer firmware.. From here things went really bad and after a lot of different wipes and things that I don't know anything about I am stuck with an useless device
I have searched all forums (I think) but with no luck, so if anyone know what I should do I would be really thankful.
And no.. I do not have a backup!!
This is the Fastboot Getvar All:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.16.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXX
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4111mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Fastboot can communicate with the phone but ADB devices will not find the phone.
If I reboot the phone I only see the HTC start screen for a few seconds and then nothing.. It has TWRP on it which I can enter.
Please help me!
If you have TWRP you might download any ROM and flash it but since you're S-On don't forget to flash kernel in fastboot mode after you flash the ROM.
Kernel is the boot.img file on the root of the ROM zip. Extract it to PC and while in fastboot issue the "fastboot flash boot boot.img" command.
For changing firmware you need S-Off which you don't have. To gain it you should flash first a close to stock ROM (like Viper for ex) then try to gain S-Off with rumrunner or another method. Then you can flash firmwares
Sent from nowhere over the air...
Hi Rapier, thank you so much for your help. Now it's working again
Claus71 said:
Hi Rapier, thank you so much for your help. Now it's working again
Click to expand...
Click to collapse
Don't forget to do that after every ROM flash. If you'll get S-Off, you won't need to do that anymore
Sent from nowhere over the air...
Related
hello, ive got this rogers htc one x that is stuck in a bootloader loop, anyway heres my info i really need help with this:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.14.0000
(bootloader) version-baseband: 0.23a.32.09.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.631.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT24DW307580
(bootloader) imei:
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3706mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-97c9a06e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 1.031s
C:\adb>
actually its stuck in qhusb_dload
How did it get in this state?
Can you not get to bootloader?
slickwidnick said:
hello, ive got this rogers htc one x that is stuck in a bootloader loop, anyway heres my info i really need help with this:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.14.0000
(bootloader) version-baseband: 0.23a.32.09.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.631.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT24DW307580
(bootloader) imei: 32
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3706mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-97c9a06e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 1.031s
C:\adb>
actually its stuck in qhusb_dload
Click to expand...
Click to collapse
well now ive managed to mess around and got aokp_evita-rohan-milestone6.4 rom loaded on my phone, but its stuck in a boot loop at the boot animation... ahhh, this is frustrating.....
How did you get it out of QHSUSB_DLOAD mode? You're s-on so you probably just need to flash the boot.img from the ROM zip via fastboot to get it to boot.
Sent from my Evita
timmaaa said:
How did you get it out of QHSUSB_DLOAD mode? You're s-on so you probably just need to flash the boot.img from the ROM zip via fastboot to get it to boot.
Sent from my Evita
Click to expand...
Click to collapse
just tried flashing the boot.img from the rom twice to make sure and it still bootloops at the boot animation...
and for how i ended up getting it off of qhusb_dload, i just downloaded all of what i could find for the rogers htc on x and tried flashing this, flashing that, and i dont really know exactly what it was that kicked it out of that mode...
im still confused as to why it wont boot after flashing the boot.img from the rom..
While "flashing this and that" has gotten you out of trouble this time I wouldn't suggest doing that again in the future, it was likely a huge fluke and flashing random things is a pretty bad idea. What ROM are you trying to flash?
Sent from my Evita
timmaaa said:
While "flashing this and that" has gotten you out of trouble this time I wouldn't suggest doing that again in the future, it was likely a huge fluke and flashing random things is a pretty bad idea. What ROM are you trying to flash?
Sent from my Evita
Click to expand...
Click to collapse
well originally i was trying to flash i think it was eragon and i got as far as flashing boot.img and then the rom wouldnt flash. now i have aokp_evita-rohan-milestone6.4 rom loaded but it bootloops.
should i try to flash another rom and keep trying till i find one that will startup?
What is eragon? If that's a ROM you've flashed a ROM that isn't for this device, no such ROM exists for the Evita (HTC One XL / AT&T One X). You're lucky you didn't brick your phone. Have a look through our development sections which you'll find here:
http://forum.xda-developers.com/forumdisplay.php?f=1541
http://forum.xda-developers.com/forumdisplay.php?f=1726
Don't ever download ROMs from anywhere except within those two development sections or you're on a dangerous road to phone bricking land. Find a ROM you think you'll like, read the OP, make sure you meet any requirements it lists prior to flashing, and flash it.
PS. You should really remove your IMEI number from your first post, and the other post where you quoted it. Don't ever post your IMEI publicly.
Sent from my Evita
My HTC One S is stuck in a bootloop. I'm very new to this stuff.
fastboot getvar all
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3866mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I can currently start the bootloader, which states S-ON, TAMPERED and UNLOCKED.
I can install recoveries. Right now I have TWRP, and I think it works the way it should.
Tried installing a stock ROM, tried CM11 (which is what I started with) and CM10.2.
I updated the firmware which is what I think caused the issue.
Between every attempt, I cleared cache and dalvik before and after each ROM flash, then rebooted.
Every ROM puts me into a bootloop.
Please help me.
Ricaz said:
My HTC One S is stuck in a bootloop. I'm very new to this stuff.
fastboot getvar all
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3866mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I can currently start the bootloader, which states S-ON, TAMPERED and UNLOCKED.
I can install recoveries. Right now I have TWRP, and I think it works the way it should.
Tried installing a stock ROM, tried CM11 (which is what I started with) and CM10.2.
I updated the firmware which is what I think caused the issue.
Between every attempt, I cleared cache and dalvik before and after each ROM flash, then rebooted.
Every ROM puts me into a bootloop.
Please help me.
Click to expand...
Click to collapse
Easy fix your going to have to flash a boot.img from the rom
You have to do this because your S-on if you were S off you would not need to flash the boot img yourself
follow the instructions here http://forum.xda-developers.com/showthread.php?t=1604677
dave1970 said:
Easy fix your going to have to flash a boot.img from the rom
You have to do this because your S-on if you were S off you would not need to flash the boot img yourself
follow the instructions here http://forum.xda-developers.com/showthread.php?t=1604677
Click to expand...
Click to collapse
I don't have access to a PC with Windows on it, unfortunately. Can't I do it without the All-in-One tool?
Ricaz said:
I don't have access to a PC with Windows on it, unfortunately. Can't I do it without the All-in-One tool?
Click to expand...
Click to collapse
I have only installed through a PC using this toolkit but the links have been removed anyway to download it.
There are other tools but I have not used them I'm sorry
A little update:
First, recovery stopped having control over the SD card somehow. Right now I can't even boot into recovery anymore.
I think I need to run RUU, but I don't know which one. I have downloaded this one off androidruu.com:
Code:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
because it matches my radio version, but I don't know about the rest. Currently in the process of installing Windows 7 on a virtual machine so I can run this thing (why the hell is it a .exe file?!).
Does anyone know which one would work for me?
Hi.
Recent I downloaded a custom rom running android revolution 71.0 hd, my phone is rooted and I am running twrp 2.7. I choose to go back to original rom and restore everything my phone is also relocked tampered. I somehow locked it and again relocked and wiped everything, I ran this http://forum.xda-developers.com/showthread.php?t=2626050 rom and installed it, a while later I restart my phone and get "system proccess error" wait or click ok to shut down so the rom was not working. Somehow I am now stuck on the fastboot and cannot do a ****. Tried so hard installing like over 11 different twrp versions and no one of them seems working, only 1 worked from t-mobile, it went in and then I could not move anything, just stuck freez. I really want to do RUU recovery but my phone is S-on and I don't know if you guys know if it works to do a RUU even if the phone is s-on, I can lock the bootloader or keep it like now unlocked that works so far but cannot do anything else like install custom rom or anything else. I will put down my phone specifications down below and also typed "fastboot getvar all" command so you will see all info I can put down and which ruu version do I need and how do I do to install or fix this pls help me guys!!!!
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH36TW902758
(bootloader) imei: 357864056203233
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4289mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
and when I look on my phone (fastboot I see)
M7_UL PVT SHIP S-ON RH
HBOOT 1.55.0000
RADIO 4A.21.3263.04
etc etc
pls help me guys!!!, mike:crying::crying::crying::crying:
Give it to a phone service , they will repair .
Hello,
I will try to explain what happened, although I am not sure... I tried to root my phone so I can do a data recovery as I lost all data... at this stage phone still rooted fine, no contacts, no sms, no nothing... it looked like a factory reset.
1. I used htcdev to unlock bootloader
2. I flashed recovery-clockwork-touch-6.0.3.6-m4.img to try and load the superuser.zip to root my phone... I tried several zips, but none of them rooted it... I had to use adb through: cmd C:\Program Files (x86)\HTC\HTC Sync Manager\HTC Sync>, at this stage phone still booted normally and no problems... so I used adb push to install zips to root it... none of them worked...
3. I realized that it might be the clockwork recovery that is the problem, so I decided to change the recovery to TWRP... and this when something went wrong as the phone wouldn't reboot into normal mode anymore, only bootloader... I though giving it a factory reset would solve the issue, so I did... nothing happened...
4. I managed to flash twrp-2.8.7.0-m4.img recovery and discovered that there is no OS and basically apart from the bootloader theres nothing else on the phone...
I understand that I need to do a RUU flash, however I cannot find the one I need. I followed this thread, however I cannot seem to find the RUU that I need
http://forum.xda-developers.com/htc...-official-stock-sense-6-rom-firmware-t2817921
I also tried fastboot flash zip sense6_firmware.zip, it cannot do it... gives me a fail error...
and now I am stuck as adb doesnt work to push files from either the unlock folder, nor the htc sync one or C:\Program Files (x86)\Android\android-sdk\platform-tools>
This is my first root attempt (maybe I shouldn't do one and won't in the future ) as you can see, but maybe I am just missing something very obvious and easy...
I'd like to get the original soft back on the phone but even if its still stored on it, I don't know how to get to it and make it work...
Phone details
astboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.22.0000
(bootloader) version-baseband: 1.28.40e.00.24
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.14.401.2
(bootloader) version-misc: PVT SHIP S-ON
If you can, please help me!
I have exact same problem! please help
Alpha1BA said:
I have exact same problem! please help
Click to expand...
Click to collapse
hello, what version are you running?
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.22.0000
(bootloader) version-baseband: 1.28.40e.00.24
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.14.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid:
(bootloader) product: m4_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PO5820000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4317mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e1af350
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Alpha1BA said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.22.0000
(bootloader) version-baseband: 1.28.40e.00.24
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.14.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid:
(bootloader) product: m4_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PO5820000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4317mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e1af350
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Looks like we have the same version... Honestly, I spent so much time on trying to S-off it and fix it, I think I'll just give up... I found a UK based service that does it for £20... not sure it's worth the time and effort to fix it ourselves... if you're UK based, msg me and I'll give you the details if you're interested!
Hi there, if you unlock the boot loader you will wipe all data from your phone. You confirmed that with the swipe to agree unlock. Recover your data might be difficult but you can give it a try even from Recovery itself.
The easiest way to get your phone back to work is the appropriate RUU for it, but with unlocked boot loader and TWRP booted you can try to put the ROM via USB on the Phone. Flash it via TWRP and since you where S-ON you need to flash the boot.img for your chosen ROM manually the same way you did it for recovery (fastboot flash boot boot.img). If your boot.img does not do well with your ROM you will get into a boot loop. hope this helps.
Hi Guyz,
I am really stuck and I have tried every possible solution online but unable to solve it. I have HTC Sensation Pyramid stuck in boot loop. Although I am able to boot into bootloader but unable to do anything else. Its board was replaced so default HTC Dev Unlock don't work. Every other solution require to boot into the ROM and enable debugging for ADB like JuopunutBear S-OFF and Rumrunner.
Here are the details from fastoot getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.45.401.3
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359***********
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4117mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Any help will be highly appreciated, Thanks
Aero.
According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]
Gatosbil said:
According your current device status your device should have been S-OFFed before.
As I can see you have SuperCID and your hboot version is higher than it should be as long as you probably had installed a European RUU and it should have an earlier version of hboot.
So the only solution for you will be to flash an official pyramid RUU for any carrier you like with version-main 1.45.401.3 or greater.
You can find Pyramid RUU's here.
I would sugest you to install the lattest RUU for the carrier of your choice.If you want a European RUU you can download a 3.33 fireware and S-OFF your device.
Juopunutbear S-OFF [NO HTCDEV UNLOCK]
Rumrunner S-OFF [NO NEED HTCDEV UNLOCK/NO WIRE TRICK]
Click to expand...
Click to collapse
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.
Aerocaria said:
Hi Gatosbil,
Thank you so soo much for the reply and to be honest, after trying everything on net, I put my phone in my "history box" lol... but you gave me hope that I might resurrect it back to life. Well, it does came back to life!! RUU 1.45.401.3 gave me Signature Error so I tried downloading and install 3.33.401.6 with success. And its alive now!!! Thanks to you
Now the S-OFF part, Juopunutbear require Ubuntu and I had a very bad experience with that as by running windows 10 and ubuntu on same system, my hard drive crashed and I lost a lot of data. Yes Live CD might work, but my laptop is 2 years old and I haven't used DVD-Rom for a long time and its not reading data from any CD or DVD. And Rumrunner website is giving Database error so I can not download anything from there until they fix the website. I will keep checking and as soon as its back, I will try Rumrunner to S-OFF and will let you know how it goes.
Here is the current Fastboot getvar all details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.401.6
(bootloader) serialno: HT15BV80****
(bootloader) imei: 359************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4163mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.561s
Thanks Again and Best Regards,
Aero.
Click to expand...
Click to collapse
i will send the juopuntubear files(windows) for S-OFF via pm
but know this i don't think it will work on win10