Database Info

LG G4 H810 Upgrade to Android 6.0 without active ATT SIM Card GUIDE

After much searching, I found the way to upgrade to Android 6.0 MM without a sim, the solution came from a group of reddit, a guy named rmrf.
Before you started this steps , its important that you have on 10o Version if you are on 10i or other , y recommend you flash 10o first ,Guide Here
1. Download the Android 6.0 MM OTA file, Thanks to Shinji257 or here(Mirror)
2.Unzip the file, and you get a dlpkgfile file rename it to 20N.up
3.Copy 20N.up file to /sdcard/SoftwareUpdate/ path on internal memory phone not external SD card (if folder doesn't exist, just create it)
4. Connected the phone with USB Debugging Activated , open a new CMD window and run
Code:
adb devices
check if you device appear listed
Run this:
Code:
adb shell
4.Run this command in adb shell:
Code:
am start -n com.lge.lgfota.permission/com.lge.lgfota.permission.DmcEzUpdateStart
Update should now start.
Do not forget to give thanks. :good:

who's the first try this way?

just tried this procedure and nothing happened, no update, no error...any thoughts?

I already did this procedure, the first attempt was successful,
What software version you have?
Are you root?
what happen when you run the adb shell command?
in my case i had 10o with stock , no root and when i run the command my phone REBOOT and upgrade begin and i put the file in my internal memory not external

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Phone is not rooted, on build LMY47D (ver H81010l). I got further this last time, I had the update file on the SD card, but when I moved it to the internal storage the process started. Unfortunately once the update started i received an error almost immediately saying the update could not be performed and to contact LG customer support with an error code of 0x1125000. Got the same result twice in a row....not sure what else to try.

mmm , you can try to flash first the 10o version that is the last one before MM , in other thread it is how to do it with LGup softwarehere

i got the same error message.

This is a delta update from 10o version so you should be on stock 10o before trying the procedure.

I can't update my G4 H81010o to Android 6.0 from update software.
Hi pro, We are Vietnamese with LG G4 second hand from US. So we have not AT&T SIM card. When I check about update, I get new update notification on my device, but when I start update, this phone say will reboot to update, but when finish, I can't see any changed from my phone. The android version still are 5.1 from before. And I was checked on internet, then get your guide post here, and I do like you teaching, but my phone still with android 5.1 version
I hoping Pro will help me resolve this problem! Thanks you!

duonghero said:
Hi pro, We are Vietnamese with LG G4 second hand from US. So we have not AT&T SIM card. When I check about update, I get new update notification on my device, but when I start update, this phone say will reboot to update, but when finish, I can't see any changed from my phone. The android version still are 5.1 from before. And I was checked on internet, then get your guide post here, and I do like you teaching, but my phone still with android 5.1 version
I hoping Pro will help me resolve this problem! Thanks you!
Click to expand...
Click to collapse
Are you rooted if you are return to stock using this method http://forum.xda-developers.com/showthread.php?t=3248532 then follow instructions on OP only update from 10o version.

Thanks Pro
netomel said:
Are you rooted if you are return to stock using this method http://forum.xda-developers.com/showthread.php?t=3248532 then follow instructions on OP only update from 10o version.
Click to expand...
Click to collapse
Thanks Pro, I'll try this method, then apply your guide. Today I'll test, and when I get result, I'll post in here.

I was able to updateee!!! Just needed to create Software Update folder on internal storage and put the 20N.up file there and do the rest of the procedure above. There is a error: it says put the file on the external when thats wrong. I flashed the stock 10o before though

Sorry Lisandro, I did not specify that have to copy the internal or external, There are internal /sdcard/ path, i dont mean SDcard (external)

Success. Thank you very much

netomel said:
Are you rooted if you are return to stock using this method http://forum.xda-developers.com/showthread.php?t=3248532 then follow instructions on OP only update from 10o version.
Click to expand...
Click to collapse
Hi pro, My phone not rooted yet, and in android 5.1

Can someone who is actually on the US, AT&T version please test this and report? I'm not willing to possibly soft-brick my device, but would love the opportunity to safely update to 6.0 (providing root is possible in the process).

duonghero said:
Hi pro, My phone not rooted yet, and in android 5.1
Click to expand...
Click to collapse
Then just make sure you have 10o version by checking software info in settings/ general/ about phone/ software info. If you are on a different version you must flash 10o version using LG FLASH tool specified on post to go back to stock. Once you are on 10o version follow previous post instructions or OP.

netomel said:
Then just make sure you have 10o version by checking software info in settings/ general/ about phone/ software info. If you are on a different version you must flash 10o version using LG FLASH tool specified on post to go back to stock. Once you are on 10o version follow previous post instructions or OP.
Click to expand...
Click to collapse
Now my device are in H81010o Version. Not rooted yet. My notebook with full driver, ADB already, Debug USB enabled... Follow 200% instructions.... and can't update to 6.0. FOTA screen opened, reboot, and have not anything changed in my G4 phone. Haizzz so sad

duonghero said:
Now my device are in H81010o Version. Not rooted yet. My notebook with full driver, ADB already, Debug USB enabled... Follow 200% instructions.... and can't update to 6.0. FOTA screen opened, reboot, and have not anything changed in my G4 phone. Haizzz so sad
Click to expand...
Click to collapse
When your phone reboot did it go through upgrading process? If it did check the version. If not the only thing I could think is that your phone is not connected right on adb.
When you plug your phone to your computer you should have the phone on MTP , once connected when you give command
adb devices
You should see your phone listed with the word "device" in front. Example
LG3457964 device
The phone will prompt you to allow connection.

[ROOT] [TWRP] [TUT] Root and install TWRP Alcatel Flash 2 run Android 6.0 [7049D]

Hello you guys using Alcatel Flash 2 [ Alcatel 7049D ]
My name's Hung Thinh, I'm come from Flash Support Team Viet Nam. Today I'll guide you how to ROOT and install TWRP ( Builded by Me )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Note: I'm not responsible if your phone brick or bootlloop because you don't follow follow my guild step by step
Code:
INFO MY DEVICES:
- Android Version: 6.0 (Old is 5.1)
- Model: Alcatel Flash 2 [Alcatel_7049D]
- Kernel Version: 3.18.19
- Chipset: MTK6753
Request:
- Your device has been installed driver MTK
- Sp FlashTool
DOWNLOAD:
Root_TWRP_Flash2-MM_HungThinh.zip​Update: Fix all mount error for TWRP
STARTED...
Fisrt, you must installed driver mtk
- Copy file "BETA-SuperSU-v2.67-20160121175247.zip" to your sdcard
- Run Sp FlashTool
-Next, Loading scatter file and open
- Click download.
AND NOW. You Tun off your phone. wait 10s. and connect USB cable
AND your phone flashed succefully TWRP
Now. go to recovery mode (Press Power and vol +9)
Choose Recovery mode
And Follow step by step
Code:
1. Choose Install
2. Select Micro Sdcard
3. Flash file BETA-SuperSU-v2.67-20160121175247.zip
4. After it installed. You must Obligatory wipe Davik cache - cache on the Left
NOTE: You must WIPE DAVIK CACHE/CACHE ON THE LEFT After Install SuperSu
5. Reboot System on the Right
Success. Wait it BOOTING and OPTIMAL application
Some picture:
TWRP:

now i use beta 6.0MM (V1.7) i want test install twrp and root 6.0 marshmallow can u tell me

idneung said:
now i use beta 6.0MM (V1.7) i want test install twrp and root 6.0 marshmallow can u tell me
Click to expand...
Click to collapse
Yes, but not now, you must wait official MM from flash team was released. I will share link and check it at #1

Updated linkdownload

please share your fb group link..

Fallen_Knight said:
please share your fb group link..
Click to expand...
Click to collapse
Look at The first picture

Thanks for this. Do you have the source code on github?

can open..maybe its a secret group

I just upgraded MM V1.7 but my problem is
I can't sign in my Google account, it say:
"please sign in using one of the owners accounts for this device"
I have reset in setting and in stock recovery,
I have changed my Google account password, but still can't pass it...
Any solution?
Do you have flash able stock rom,
Thankbyou

andro_diggers said:
I just upgraded MM V1.7 but my problem is
I can't sign in my Google account, it say:
"please sign in using one of the owners accounts for this device"
I have reset in setting and in stock recovery,
I have changed my Google account password, but still can't pass it...
Any solution?
Do you have flash able stock rom,
Thankbyou
Click to expand...
Click to collapse
i don't know it, because i don't forget my GG account

nhtnokia said:
i don't know it, because i don't forget my GG account
Click to expand...
Click to collapse
Is twrp works with MM V1,7?

andro_diggers said:
Is twrp works with MM V1,7?
Click to expand...
Click to collapse
It work only Flash 2 run android 6.0 Marshmallow.

Thanks for the guide sir. Can you port some roms for flash 2 like miui, cm13, flyme os, etc ?

PenyulTK said:
Thanks for the guide sir. Can you port some roms for flash 2 like miui, cm13, flyme os, etc ?
Click to expand...
Click to collapse
I don't have free time, man. Now i very busy

is it possible whit eu wersion

andro_diggers said:
I just upgraded MM V1.7 but my problem is
I can't sign in my Google account, it say:
"please sign in using one of the owners accounts for this device"
I have reset in setting and in stock recovery,
I have changed my Google account password, but still can't pass it...
Any solution?
Do you have flash able stock rom,
Thankbyou
Click to expand...
Click to collapse
Are you reup Marshmallow V1.7, sir?

Z.Mahesvara said:
Are you reup Marshmallow V1.7, sir?
Click to expand...
Click to collapse
How do you get EU version up to 1.7 im on 1.3

My phone is EU version 1.3 do i dare use this firmware

At the last picture is my phone gonna be like thailand languages

i have an issue installing TWRP :
when i connect my phone nothing happens :
my phone is just charging normally
and FLASH tool is still hold on "download"

[LineageOS]Install LineageOS 16 on Mediapad M5 Lite

Thanks to XDA Forum,contributors, OpenKirin Team and of course Lineage Team, i managed to install LineageOS on my Mediapad M5 Lite 10.1 BAH2-W19 C431.
I would like to share my newbie experience.
3 steps :
1) Unlock bootloader
For this i follow this thread from sadiqkarur : https://forum.xda-developers.com/t/...huawei-mediapad-m5-lite-all-editions.3989111/
Which is perfect, and i especially would recommend to follow Drumiec instructions
drumiec said:
BAH2-W19 8.0.0.230 C431
Click to expand...
Click to collapse
I would just precise this :
> Step "5: Open Calculator app and type ()()2846579()()" in landscape view
> Step "Hit the Read bootloader code (=> Select on the right side menu: Unlocking > Read bootloader code) and this is what you should get:.." (additional information)
2) Flash/install LOS 16 (OpenKirin LOS 16 Rom)
Thanks to merlinolillo on this thread for link to OpenKirin possibility, and Openkirin team.
>>> Download ROM : LOS 16 Emui Openkirin ("Download" comes with gapps, for no gapps check "View Changelog")
>>> Procedure : LOS 16 Install all steps
3) Feedback and tips
As i have no LTE use , i'm not abble to test it. I find back benefits from Lineages.
Everything seems working well, i'm still testing, except :
> screen display is not clean and clear, like out of focus, blurry, fuzzy. Since i put display in black theme, display became more correct. But not really solve. > solved with display (livedisplay menu) calibration, green set at 99%.
> fast charge
> 5ghz wifi conection
Tips :
> If using headphones with jack connection sound is very low and with some reverb, just put audiofx parameter off, it should resolve.

To solve the screen display problem you have to set the display calibration at 99% at green. To do so go to settings - Display - LiveDisplay and set green at 99%. You're be able to resolve in that way.

Display out of focus > solved
Many thanks merlinolillo

Found 2 bugs,fast charge and 5ghz wifi conection..

I' ve installed succesfully Andy Yan's GSI Lineage 17.1 too (android 10). Works fine including fast charge

3 hours charging from empty to full. Seems that fastcharge not working also on my side.
merlinolillo said:
I' ve installed succesfully Andy Yan's GSI Lineage 17.1 too (android 10). Works fine including fast charge
Click to expand...
Click to collapse
Thx for your feedback.I will give a look.

[email protected] said:
3 hours charging from empty to full. Seems that fastcharge not working also on my side.
Thx for your feedback.I will give a look.
Click to expand...
Click to collapse
You have to enable it: Settings - Phh Treble Settings - Huawei features - Huawei fast charge -Mid-fast (2750mA)

merlinolillo said:
You have to enable it: Settings - Phh Treble Settings - Huawei features - Huawei fast charge -Mid-fast (2750mA)
Click to expand...
Click to collapse
Really nice but...i don't find these settings in this lineage version parameters.
May you help with a screenshot for example ? Or more details
Edit : just freshly installed AndyVan lineageos android 10 rom, with these parameters settings (and blurry), let's see if everything works. Following this thread.

Anybody have anything for huawei mediapad m5 lite 8?
Would this os work.

Hello, thanks for this simple tuto, I succeed.
However, netflix doesn't work. When launching a movie: error "There is a problem playing the vidéo. Please try again. (5.0)"
In netflix app settings, I notice that there is No codec instead of on my phone where there is VP9 and AVC-High.
Does Netflix app work on your tablet Huawei MediaPad M5 Lite (BAH2-W19) after the installation of the custom ROM?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello! Thank you so much for this guide.
I have a BAH2-W19 8.0.0.371 (OCEC567)
I have unlocked Bootloader and installed TWRP.
I can't seem to find the RAMDISK for this version of the firmware. The latest available on the firmware site is not the version I have.
Does anyone have RAMDISK handy for this firmware? Or any advice on how to proceed?
Thank you kindly for all your help.

gleck0de said:
Hello! Thank you so much for this guide.
I have a BAH2-W19 8.0.0.371 (OCEC567)
I have unlocked Bootloader and installed TWRP.
I can't seem to find the RAMDISK for this version of the firmware. The latest available on the firmware site is not the version I have.
Does anyone have RAMDISK handy for this firmware? Or any advice on how to proceed?
Thank you kindly for all your help.
Click to expand...
Click to collapse
Downgrade to the latest HuaweiFirmFinder version using HISuite Proxy (make sure Old firmware is checked), you could find UPDATE.APP in update.zip in Documents\Hisuite\ROM. Extract RAMDISK.img using HuaweiUpdateExtractor for root. Then, root your device with sadiqkarur's guide and trigger system update (Download latest full package). Once it's downloaded do not reboot, you could find the latest update.zip in /data/update/HwOUC.

Quelquunmaisqui said:
Downgrade to the latest HuaweiFirmFinder version using HISuite Proxy (make sure Old firmware is checked), you could find UPDATE.APP in update.zip in Documents\Hisuite\ROM. Extract RAMDISK.img using HuaweiUpdateExtractor for root. Then, root your device with sadiqkarur's guide and trigger system update (Download latest full package). Once it's downloaded do not reboot, you could find the latest update.zip in /data/update/HwOUC.
Click to expand...
Click to collapse
Thank you so much for this information. I downloaded a FULL OTA backup from a link in this forum and was able to extract the RAMDISK.img file. This RAMDISK.img was from a different version than the stock firmware on my device, but it booted a few ROMs. Problem is, none of audio and so I have gone back to stock 8. Do you think a new RAMDISK that matches my original firmware would alleviate this problem? Have you had success to any specific roms you could recommend?
Thank you again for taking the time to respond, I appreciate it!

@
gleck0de said:
Thank you so much for this information. I downloaded a FULL OTA backup from a link in this forum and was able to extract the RAMDISK.img file. This RAMDISK.img was from a different version than the stock firmware on my device, but it booted a few ROMs. Problem is, none of audio and so I have gone back to stock 8. Do you think a new RAMDISK that matches my original firmware would alleviate this problem? Have you had success to any specific roms you could recommend?
Thank you again for taking the time to respond, I appreciate it!
Click to expand...
Click to collapse
@gleck0de
Were you able to move forward with the damn BAH2-W19 8.0.0.371 ?
any comments are welcome

P40 pro OTA after google install

Hi, I bought huawei p40 pro and i have problem with updates.
My version is 10.1.0.166(C432E8R4P1) someones tried install google services, and it isnt my original firmware
How I can back to the original system version? Where i can found it?
Fimware finder not working last time

mikoprotek said:
Hi, I bought huawei p40 pro and i have problem with updates.
My version is 10.1.0.166(C432E8R4P1) someones tried install google services, and it isnt my original firmware
How I can back to the original system version? Where i can found it?
Fimware finder not working last time
Click to expand...
Click to collapse
What is your original firmware? You dont know how lucky you are. Better stay on that firmware.

badmania98 said:
What is your original firmware? You dont know how lucky you are. Better stay on that firmware.
Click to expand...
Click to collapse
I dont know what is my original firmware, thats the problem. I like this firmware, but i need updates.

mikoprotek said:
I dont know what is my original firmware, thats the problem. I like this firmware, but i need updates.
Click to expand...
Click to collapse
I hope that you know that if you update to the last firmware version and want to downgrade will be very difficult. If you have OTG and usb memory stick you can update with dload firmware. Can you connect the phone to the computer? Is your USB connection working?

badmania98 said:
I hope that you know that if you update to the last firmware version and want to downgrade will be very difficult. If you have OTG and usb memory stick you can update with dload firmware. Can you connect the phone to the computer? Is your USB connection working?
Click to expand...
Click to collapse
Yes, usb connection working fine. I need updates, downgrade is not important.

mikoprotek said:
Yes, usb connection working fine. I need updates, downgrade is not important.
Click to expand...
Click to collapse
See your PM

Problem was solved.
I flash phone with emui 11 firmware via otg usb.
I tried very times via flash usb and nothing. Finally i used usb otg and memory card reader + sdcard and voila
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unzip the file
Copy the dload folder (with it contents) on memory card or usb stick
Then:
From calling app (phone):
*#*#2846579#*#*
4. Software Upgrade
1.Memory card upgrade

You are welcome.

mikoprotek said:
Problem was solved.
I flash phone with emui 11 firmware via otg usb.
I tried very times via flash usb and nothing. Finally i used usb otg and memory card reader + sdcard and voila View attachment 5381191
Unzip the file
Copy the dload folder (with it contents) on memory card or usb stick
Then:
From calling app (phone):
*#*#2846579#*#*
4. Software Upgrade
1.Memory card upgrade
Click to expand...
Click to collapse
Can u send me that firm pls.

mihai201984 said:
Can u send me that firm pls.
Click to expand...
Click to collapse
I cant. You must ask badmania98, he help me.

mikoprotek said:
I cant. You must ask badmania98, he help me.
Click to expand...
Click to collapse
I tried to talk to him in English and Romanian. He doesn't respond me.

K

Lol, wrong topic. Please delete

How To Guide [ROM][MIUI][cupid] Xiaomi.eu ROM for Xiaomi MI 12

How to install Xiaomi.eu ROM for Xiaomi 12
Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file BETA or STABLE
- If you are on Windows: Right click on downloaded zip - Settings - Unblock zip content
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Unpack downloaded zip file in the PC (WinRAR is recommended)
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via original USB cable
- Run fastboot installation script as administrator from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot its done (first boot may take up to 15min)
Steps to install update of xiaomi.eu ROM (All your data and files on internal storage will NOT be deleted!)
- Download our ROM zip file WEEKLY or STABLE
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_update_rom.bat
For Linux ./linux_fastboot_update_rom.sh
For MacOS ./macos_fastboot_update_rom.sh
Update guide on the video
- After reboot its done (first boot may take up to 10min)
Update via OTA:
Installation via OTA is currently not possible due to missing TWRP
Updater will notify you about new version and download it to your device for you
You have to copy it to your PC, unpack it and run fastboot_update_rom sctipt
Enjoy..

Please create a theme Xiaomi 12x it also has a firmware from xiaomi.eu

@ingbrzy will future roms be based on the global rom?

ermacwins said:
@ingbrzy will future roms be based on the global rom?
Click to expand...
Click to collapse
nope.. we prefer China ROM as base rather than Global..

ingbrzy said:
nope.. we prefer China ROM as base rather than Global..
Click to expand...
Click to collapse
May I ask why?

ermacwins said:
May I ask why?
Click to expand...
Click to collapse
seems you never used a Global ROM.. try it and you will see..

ingbrzy said:
seems you never used a Global ROM.. try it and you will see..
Click to expand...
Click to collapse
Hevent used it in a while.
Also is it ok to flash the global rom when I sell my phone? Does it relock the bootloader?

ermacwins said:
Hevent used it in a while.
Also is it ok to flash the global rom when I sell my phone? Does it relock the bootloader?
Click to expand...
Click to collapse
you can not lock bootloader on Global ROM if you have a chinese device.. only on Global device..

ingbrzy said:
you can not lock bootloader on Global ROM if you have a chinese device.. only on Global device..
Click to expand...
Click to collapse
Ok so it will flash but bootloader will remain open?

ermacwins said:
Ok so it will flash but bootloader will remain open?
Click to expand...
Click to collapse
depends what you select in MiFlash

ingbrzy said:
depends what you select in MiFlash
Click to expand...
Click to collapse
What should you choose if you want to flash global?

Is it possible to thoroughly remove privacy and security modules on China ROM? or should we just wait for AOSP ROMs?

Does Google pay work?

ermacwins said:
Does Google pay work?
Click to expand...
Click to collapse
Yes, but if you don't root it (or you hide it)

rubencm2 said:
Yes, but if you don't root it (or you hide it)
Click to expand...
Click to collapse
It will work unrooted on EU rom?

ermacwins said:
It will work unrooted on EU rom?
Click to expand...
Click to collapse
Depends whether EU rom status comes with passed safetynet. If not, you can root & zygisk hide gpay.

Hello,i'll be short,i have mi12 bought in china (china stable),i have unlock and put on xiaomi.eu but I have many issue.i.e. no push on Company email with Google ,some freeze, no possibility to add Exchange account, no update with calendar and so on... you suggest me to wait update of Xiaomi.eu or put,if possible, global eea official Xiaomi?(if is possible obviously)

it is ok to flash this rom if im on global version? i dont mind the change from global to china just dont want to brick the thing

Where i find the link for cupid? :S
EDIT: found it thx

rodrigo_blind said:
Where i find the link for cupid? :S
Click to expand...
Click to collapse
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/xiaomi.eu_multi_XM12_V13.0.32.0.SLCCNXM_v13-12-fastboot.zip/download