Hello guys,
I will really appreciate if somebody could help me.
I bought a samsung gear s3 R760 frontier from a marketplace like craiglist but the owner forgot to delete from his samsung account and I cannot contact him. When I am trying to start the watch I get the reactivation lock error.
Ok... I read about this and I could rewrite a firmware with netodin.
I tried to connect the smartwatch to my laptop via download wireless mode. When I am trying to connect from my laptop ( windows 10) I am getting an error: connection fail: connection timed out (110) but I tried also with an iphone and macbook and it worked ( I didn;t got that error)...
I am blocked because I cannot use netodin on macbook and I tried with almost 5 different pcs and I got same error. I uninstalled antivirus, turned off firewall but I don't know why I still get that error.
Please help
Bring it to samsung centre with the receipt or proof of purchase from Craigslist
Sent from my SM-N950F using Tapatalk
I tried but they don't want to unlock it.
Any advices about how I can fix that error? If I could connect the s3 to my laptop it will be great because I will could rewrite a firmware with netodin.
gear 760 no enter wireless download
I have a gear r760 that starts alone, does not close the button, goes alone in download mode. from there if I select wireless download does not go, it restarts all in recovery mode.
I stuck yarn on pins outs but on windows 7 or 10 does not recognize my device, it gives me the error usb not recognizet. it can be repaired?reactivation lock is on
Related
I have the Galaxy Note II (sprint SPH-900C) and it is rooted. I wanted to stop the bloatware from running so I took some advice here and froze all the apps I did not want to run and some that were listed as safe.
When I attempt to connect to Kies wifi it will not connect or discover my laptop. So I went back in and unfroze the Allshare Cast, Allshare Dongle and Allshare service. Now it will locate my laptop and the Note says connected, the laptop says connected and downloading but does not ever populate and eventually disconnects, So it does not seem to fully connect and load the data like it does on USB, I want to connect to Kies WIFI again. My question is are all 3 of these necessary for it to connect or more importantly, exactly what services are required for the Kies WIFI to connect so it will work again and I can still have unnecessary services frozen.
This does not impact connecting to Kies using the usb, that works fine regardless which of them are frozen. So did I miss one that I need for it to fully connect?
A little more information, Kies air, using the wifi and the browser will connect and load fine with the 3 allshare services unfrozen, it is the kies and kies lite that will not load, but they say they are connected.
Any ideas? I am thinking maybe I froze a 4th service that it needs and I am not aware of it. And kies is not frozen, I did not touch it.lol
I hope I provided enough information for a decent idea of the situation.
Hello,
I have a GT-N8020 LTE version of the Note 10.1, and I updated to 4.4.2 with Mobile ODIN, because I can't connect my tablet to pc.
My PC and my laptop and two another computers pops up with a "Can't recognize device" message.
I'm trying to use it with the original usb cable, but it doesnt seem to work.
And the another problem is that on 4.4.2 ORIGINAL/STOCK ROM, i can't turn on WiFi. I switch it on, the it automatically turns off with no error message.
What can I do? Should I take the tablet into the Samsung Service Center nearby?
I have 2 years of experience flashing with Samsung/Android mobiles, so I can't be noob (I am 16 btw)
Thanks,
Erik
I have a Samsung Galaxy S6 g920F At that did not work either headset microphone!
Only large speaker works!
Instead I tried to android but do not leave me
Windows sees the phone Unknown USB Device
I installed all you can install drivers samsung, kiess . Samsung Smart Switch etc.
I changed 5 usb cables , two laptops and all the same
Odin does not see the phone
I gave hard reset 10 times
It's like android blocked and you can not do anything to him outside
Can someone help me!!!pls
Dun what I read on google did not see anyone face such problem
excuse my English
Hello, so I am on XtreStoLite 2.4 with my S6. Never any issues the whole time Ive ran it. However now that I have my Galaxy S8 which cant be rooted... trying to get the Smart Switch with USB connection to work.
It will NOT read up when I connect them directly, also will not connect via PC for smart switch to start its thing. (Smart Switch via wifi works, but that doesnt transfer any of my non play store apps)
Now I did try Smart switch on 2 different PCs. Both PCs DO read my S6 and I could transfer files just fine with explorer. So drivers and so are working fine. Even tried 3 USB cables and togged between usb debugging and off. I am in MTP mode as well.
Even in Smart Switch it will say "Connecting" because it detected the phone. Just never gets past that on the PC or the Galaxy S8. Just says the connection timed out and couldnt connect.
So just checking here if anyone may have any insight that may solve this. Thanks.
Mysticales said:
Hello, so I am on XtreStoLite 2.4 with my S6. Never any issues the whole time Ive ran it. However now that I have my Galaxy S8 which cant be rooted... trying to get the Smart Switch with USB connection to work.
It will NOT read up when I connect them directly, also will not connect via PC for smart switch to start its thing. (Smart Switch via wifi works, but that doesnt transfer any of my non play store apps)
Now I did try Smart switch on 2 different PCs. Both PCs DO read my S6 and I could transfer files just fine with explorer. So drivers and so are working fine. Even tried 3 USB cables and togged between usb debugging and off. I am in MTP mode as well.
Even in Smart Switch it will say "Connecting" because it detected the phone. Just never gets past that on the PC or the Galaxy S8. Just says the connection timed out and couldnt connect.
So just checking here if anyone may have any insight that may solve this. Thanks.
Click to expand...
Click to collapse
may be there is error on driver you installed , try remove old driver and install latest Samsung driver you can get it from :
http://samsungusbdriver.com/wp-content/uploads/Samsung-Usb-Driver-v1.5.63.0.zip
Just "fixed" it by upgrading the to the Marshmallow version of XtreStolite. Seems it solved all the issues.
Hi,
I somehow figured that because of firewall, i kept failing on my connection every time. But now that the gear shows open the netodin software and also the wifi is connected, the id on the pc screen wont show. Also the start button wont work. Finally on the log data, it says success 0 failed 0.
Any idea?
1.
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
netOdin + infos + Videos
2.
What your are trying to achieve?
Model Name... Firmware update downgrade? Repair?
3.
At home I have problems with my Standard PCs...
So I am using old Notebook with Hardware WiFi... on old Windows Vista...
And here I have mandatory to disable "something"...
With other Notebook... """modern""" and Win 8.1
It is very easy...
IMHO if you can try other PC or Notebook before you kill your whole network security settings...
Best Regards
Hi,
i want to unbrick my samsung gear s3 with netodin. but this doesn´t work at all because netodin doesn´t get the ID:IP
i have selected the wireless mode and active the AP fonction on watch and there is connectivity between PC and watch.
i have tried it on two different computer, and with two differents watchs (samsung gear s2 model rm-760) ... i have shut down the antivirus and firewall down on the 2 computer... but guess what: No ID-IP !
i already watch alot of video on youtube to do it, but same issues...
any idea ?
my contact: moralzero82(at)gmail.com
thx