I have bought a used Nokia 3 device few days ago. Now I decided to flash nougat ROM because of Orio installed. The problem is that when I connect my Nokia 3 device to Windows 7 running PC it doesn't show anything even not charging.
The USB cable is working and I'm charging my device with this. And I used this cable to connect my QMobile with PC.
Hope can I connect and transfer files??
Related
Hi dear friends,
Recently ı bought Samsung Focus from ebay, with 7004 RTM version. Here is things in order to connect pc.
-Install/Unistall Zune (i think it was 4.8.5 or something)
-Tried with different port of USB
-Tried with different usb cable
-Tried on different PC
-Tried to change ROM of phone but WP7 Downloader ver 7.41 couldnt see my phone on COM5 port
-Install/Unistall Samsung USB Drivers
When I connect to pc, my phone is only charging nothing much.
Thanks for the answers...
First thing to do before connecting to your PC
Follow the instructions mentioned on the link..You should be able to crack it
http://www.pcworld.com/article/210394/samsung_focus_hack_enables_windows_phone_7_tethering.html
thanks but i've already done three of them, none of them worked (
hi i am using a htc one m7 SPRINT version on a custom rom with cwm recovery. i have been using the phone for well over a year but suddenly there are connection problems and i cannot connect the phone to my computer. i tried downloading the htc sync manager but even that is not helping. basically when i connect the charger it says the "usb host cable is plugged in device cannot charge" except when i reboot it with the charger connected and then the device starts charging , but as i remove the charger while the device is ON the problem comes back. i wanted to install a new rom but cannot use it in FASTBOOT USB mode to install twrp. even when i am connected to my pc it will only charge and not be recognized for file transfer.
I installed everything I can think of and my laptop wont recognize my s6 after upgrading to WIN10. Kies v3, check. smart switch, check. Reinstall drivers using smart switch, check. When I plug in the USB cable it charges, but nothing happens on the screen. Cant transfer files or tether. Really frustrating. Any help appreciated
I have win10 as well. The phone is recognized immediately az a storage device and also Odin works without issues. You can try a different port or cable.
I'm having the exact same issue with my samsung s6 (samsung-sm-g920a). After installing WIN10, I haven't been able to connection via phone > laptop. I can send files from the laptop to the phone though, but not the other way around. I've tried putting my cord in all the ports but it won't work.
cant connect s6 to windows 10 via usb
I'm having the s ame issues
Did you try to reinstall the ADB drivers?
Hi,
I bought Samsung Galaxy A5 (2016), it was running on lollipop as factory, I updated it to marshmallow, then after ca 4 months, updated to nougat.
My phone (that is not rooted) could connnecting to PC (Windows 7), could connecting to other device or to a mouse via OTG cable.
The problem is after updating to nougat, no mouse or other device supported by connecting to it via OTG, and the worst is I can't connect it to PC, bcz I want to downgrade it back to marshmallow.
I use the original usb cable, when I connect it to PC, it shows just charging signal and no notification to check MTP or such things.
I tried to turn on USB debugging, and other usb cable, no successs!
Other device can connect successfully to pc via the same cable and to the same PC.
I could bear everything (no OTG and etc) but connecting to PC is very important, specially since short time WIFI disconnects automatically from device, I tried also many things to fix it but also no luck also after wipe caching data and reset factory, the problem remains also in safe mode.
So many bla bla, sry but any help to flash firmware to SM-A510F (not rooted)...
I think, this would repair everything when I downgrade to marshmallow but without PC, how does it function?!!
Hey !
In advance, sorry that bad english.
So i've rooted my smartphone years ago.
yesterday i reset it. And now TWRP is encrypted . ( i have a custom twrp because when i root my phone, normal twrp doesn't work )
So i inted to unlock it using "Disable-Force-Encryption-Treble", but i'm unable to put that .zip on my Phone.
My phone isn't detected by my PC ( test on 3 different computer )
If anybody got a solutions.
Thanks !
I think the problem is in the phone, Mi PC suite didn't detected the phone too.
Thanks a lot !
It won't connect properly via usb 3.0 ports, make sure it's connected to a usb 2.0 port (the port must be wired as 2.0, it can't be a 3.0 port running in 2.0 mode)