Hello
yesterday i've broken my screen completely , i cannont see anything and i cannot digitize anything .
How can i do ? smartphone is rooted but Debug is not active, TWRP is installed.
THX
mastercut said:
Hello
yesterday i've broken my screen completely , i cannont see anything and i cannot digitize anything .
How can i do ? smartphone is rooted but Debug is not active, TWRP is installed.
THX
Click to expand...
Click to collapse
I think only way is to change the screen, n if remember correctly if u caused injuries to mobile is out of warranty, root n modding don't compromise warranty...but if glass is broken yes, if is not maybe u r lucky if u tell them that just stop to works
Inviato dal mio MIX 3 utilizzando Tapatalk
Change display is not the only solution.
Sort 250 Euro over a price of new mix of 390 is not sane
ADB command to save picture or document would be useful
what if you put the phone into twrp and just dragged the files you need to your pc??
SOLVED:
booting in fastboot mode
then
Code:
adb pull "/sdcard/"
Related
hi ,i have this tablet mid 7114 and have big problem . i make too many pattern attempts and this lock the tablet and that is the problem i cant unlock with google account because wifi is off, usb debugging is off and cant use adb shell ,and for the final i cant find firmware for this device .i cant do anything and need help for this bug.sorry for my bad english i hope you understand mi thanks in advance.
p.s: Now i need only firmware , i totally brick it
tomasaa said:
hi ,i have this tablet mid 7114 and have big problem . i make too many pattern attempts and this lock the tablet and that is the problem i cant unlock with google account because wifi is off, usb debugging is off and cant use adb shell ,and for the final i cant find firmware for this device .i cant do anything and need help for this bug.sorry for my bad english i hope you understand mi thanks in advance.
p.s: Now i need only firmware , i totally brick it
Click to expand...
Click to collapse
Hi,did you find a fix for this?im having the same problem with the same tablet and can't find any way around it..My little brother put a password on it and it keeps saying the password is wrong and there seems to be no way to hard reset and no firmware to reinstall.The Estar customer service is non existent and I fear just being left with a tablet that is useless..
If you or anyone reading this could point me in the right direction I would be grateful..
Thanks
Hello did you find a fix im also having the same problem these chinese tablets are a nightmare
Have you tried booting into recovery and clearing data/factory reset?
Sent from my ZTE Kis 3 using XDA Free mobile app
Hello
i'm having a very serious issue ,
accidentally my phone screen is broken ,
and it costs a lot to fix it where i live ,
my phone is locked with a pattern ,
debugging is off ..
and the touch screen doesn't show anything :/ just white and black lights ..
i don't want to fix the screen , but i have to get my data .. out of it .. .
Please help me .. i beg i beg i beg :'( :crying::crying::crying::crying::crying::crying:
Why
Why you no help me people :'(
Help me pleasee , :'(
i need to get back my things from my phone :'(
mhmadkhlil said:
Why you no help me people :'(
Help me pleasee , :'(
i need to get back my things from my phone :'(
Click to expand...
Click to collapse
With debugging off you can't access phone via adb. Do you have twrp installed?
Sent from my Nexus 5 using XDA Free mobile app
You need to purchase a New LCD/Digitizer with Frame. Check ebay.
Then go to youtube and take a look at "LE55ONS"
www.youtube.com/watch?v=OPuCmfhzgbg
This will give you all the information you need.
You will preserve all your existing perssonal data and file.
This is the simple way to fix your problem
Without USB debugging being enabled and ADB there is no way to access your files.
mhmadkhlil said:
Why you no help me people :'(
Help me pleasee , :'(
i need to get back my things from my phone :'(
Click to expand...
Click to collapse
You can probably find someone to repair it for cheap
So guys you are telling me , that
there is no options available to take my data out of my phone ? !!
i did backup my contacts , (Thanks to google contacts)
but i want my pictures and files
i i'm able to unlock my phone .. !
it's going to show me the driver in this file !!
Can you attach a mouse with USB-OTG cable and do the unlock pattern with a mouse?
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
srd34 said:
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
Click to expand...
Click to collapse
Regardless of what you may or may not have done for that to happen, I would try following this guide.
You need to register an account in order to download the files, btw.
@Antiga Prime
Reached to a level where S1 tool works but shows Unknown SIN version . snapshot attached and again stuck ,
thanks added for your quick response and related link .
what else can be done
Antiga Prime said:
Regardless of what you may or may not have done for that to happen, I would try following this guide.
You need to register an account in order to download the files, btw.
Click to expand...
Click to collapse
srd34 said:
@Antiga Prime
tried using the steps shown except for opening the phone part for test point and got error attached .
Thanks for the link though . any other view ?
Click to expand...
Click to collapse
You're welcome. Any other view? No, but the entire point of that tutorial is that you have to use the testpoint, that's why you're getting that error. If you don't feel confident enough to do it yourself, I guess you'll have to take it to a repair shop.
@Antiga Prime There is an update now . need correct SIN file for xperia TX refer snapshot ..
Antiga Prime said:
You're welcome. Any other view? No, but the entire point of that tutorial is that you have to use the testpoint, that's why you're getting that error. If you don't feel confident enough to do it yourself, I guess you'll have to take it to a repair shop.
Click to expand...
Click to collapse
srd34 said:
@Antiga Prime There is an update now . need correct SIN file for xperia TX refer snapshot ..
Click to expand...
Click to collapse
I have never done this procedure, by the way, but what I can gather from your screenshot is that either the person who wrote the tutorial I linked to originally made a mistake and uploaded the wrong file, or you're using the wrong file. It seems that at some point you might have also downloaded the file found here, which is a forum post for Xperia SP. I do not know which one is the correct file, but just make sure you're using the correct one. If the one posted in the tutorial I linked to doesn't work, I guess you'd have to find one that does.
Thanks , but it seems this SIN file is also not compatible .
Seems the last resort is to reach service center .
Antiga Prime said:
I have never done this procedure, by the way, but what I can gather from your screenshot is that either the person who wrote the tutorial I linked to originally made a mistake and uploaded the wrong file, or you're using the wrong file. It seems that at some point you might have also downloaded the file found here, which is a forum post for Xperia SP. I do not know which one is the correct file, but just make sure you're using the correct one. If the one posted in the tutorial I linked to doesn't work, I guess you'd have to find one that does.
Click to expand...
Click to collapse
srd34 said:
Hello Friends ,
While flashing CM13 and making some changes in sdcard0 to ext4 format , my phone suddenly went to hard brick or as it seems with following condition : No logo, no vibration , No LED except for one blink whenever it is connected to usb wall charge or laptop .
Cant detect via flashtool on system , only part is while connecting with Windows8 , it makes the usual windows ping as if you connect a flashdrive or any other hardrive .
I was using xperia TX CM12.1 unofficial version .
Attached 2 snapshots showing the errors , before it went to sleep .
Once the phone went blank and i connected with my laptop , it pops up with QHSUSB_Dload driver installing message .
Please help , as I couldnt find any proper resolution to this solution .
@Antiga Prime & @Adrian DC any view .
Click to expand...
Click to collapse
Hello. Have you find the decision about QH SUSB on TX?
No solution yet . The device still with me and gets blinked when connected with charger , however . No solution to recover from hard brick I believe . Service centre also of no help since this model was a limited edition one and they dont have in their SKU list to do anything . keeping as fancy paper weight
please help me guys !!! I hard bricked my phone
I have a redmi note 7 pro and I had to repair IMEI so I rooted my phone successfully . then I used qpst tool in diag mode to restore modified qcn file . In pc the app said writing was successful but after rebooting my phone IMEI didn't changed , so I read in a thread if this method didn't work , you should wipe efs in twrp's terminal
using following commands :
"
dd if=/dev/zero of=/dev/block/mmcblk0p14
dd if=/dev/zero of=/dev/block/mmcblk0p15
"
Stupid me did this and after rebooting , my phone shut down and completely hard bricked . pressing power button alone or with volume up or down do nothing . no vibration or any sign of life . even laptop doesn't recognize my phone anymore with usb . please help me guys . I don't know what should I do . I heard deep flash edl cables don't work on xiaomi's new phones , and for going to edl mode you should open your phone and short circuit test pins and you should have an authorized xiaomi account for doing this . my bootloader is unlocked and the phone is rooted . I bought my phone just a week ago and It's without warranty In my country .
can I fix it without opening the phone's back cover ?
Is there anyway to save my phone ?
thanks for reading this .
is the phone charged? it is not normal to not even get into fastboot mode.
I had my back removed. there is nothing serious. looks like new. go to a service, put it on a hob and remove it very easily.
Bro
Mi community or mi forum is not opening in my redmi note 7 pro. Please give some suggestions
ga8r13llitt05 said:
is the phone charged? it is not normal to not even get into fastboot mode.
I had my back removed. there is nothing serious. looks like new. go to a service, put it on a hob and remove it very easily.
Click to expand...
Click to collapse
It's charged . When I connect my phone to charger notification led doesn't turn on like it used to be and my laptop doesn't recognize it with usb anymore . I saw in youtube that they heat the phone to open Its back .
I think that might damage battery or hardware or back glass of my phone . Isn't there a way to fix it without opening ? It's been only a week that I bought this phone
if you have the bootloader unlocked and the phone is associated with your miui account, you do not need an authorized account. you just have to put it in edl mode. but I do not advise you to remove the back alone. go to the gsm service. it comes out very easily if you are good and have the necessary tools and does not damage the phone
I bricked mine by downgrade and after contacting Xiaomi and supplier and getting nowhere the only solution is to purchase a replacement M/B from China at £80. Cheaper than replacement phone. You will get no joy from Xiaomi who just say take it to one of their shops. There are none in the UK
Good day, I have a problem and I have no idea how to solve this. I didn't want to but an root app glitched and now I have the wrong resolution on my phone, this also breaks the touch controls, so I cant navigate/use my phone.
So atm I'm not in panic as I'm sure there is one file I need to change or replace with my old (too old, I would like to keep my files if possible) twrp backup?
Another problem would be I cant acess adb from the rom as I cant confirm my (already activated) usb debugging
The adb command that proppably could help would be: "wm size reset"
So where is the wm value stored?
Reflashing the newest rom doesn't help
I'm thankfull for every help!
try this
https://play.google.com/store/apps/details?id=com.chornerman.easydpichanger
good luck
Thank you but I couldn't use my phone because the touch wasn't working in this wrong resolution.
However, I solved my problem!
Luckily, I have a USB-to-go cabel and my Miui rom has support for mouse and keyboard, this way I was able to use my phone and after that ADB to reset the resolution
Hopefully this will help some in the future with the same Problem
I need to say that I was really lucky as my draw pattern was scaled incorrect and so only a few pixel where left from the bottom row dots, barely unlockable, but I got it. Else I had potentially soft-bricked my phone, and I can only hope that a factory reset would help here.