Hello i want to aks is there a possibility to disable 2g and leave 3g/4g only? I enabled option to see many types of networks, but when i switch to lte/wcdma only he resset to lte/wcdma/gsm... Many other types doesent work except 3g only and lte only. Anyone maybe fogureout why is that so?
Don't do it. Afaik it's like this: If a phone is capable to use 4G/LTE it will always use 4G till it's not available anymore. Then it will switch to 3G and if 3G get's lost too it will use 2G then. So 2G is only in use when the other "G's" are not available. When you disable this network and 3G and 4G are unavailable you'll have no data at all. Or did I misunderstood your question?
Yes, but i always have 3g. But sometime he bug and stay on 2g so i need to use airplane mod on and off and he ****ch to 3 or 4 g from 2g. Thats why i want to have a option to disable 2g
bubobih said:
Yes, but i always have 3g. But sometime he bug and stay on 2g so i need to use airplane mod on and off and he ****ch to 3 or 4 g from 2g. Thats why i want to have a option to disable 2g
Click to expand...
Click to collapse
You can choose 3G only in the network settings, 4G only doesn't exist.
It exist if u enable it. 3g/4g exist too but when i enable it he resset to default
Jan Philipp said:
You can choose 3G only in the network settings, 4G only doesn't exist.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
oslo83 said:
View attachment 4754893
Click to expand...
Click to collapse
What's your firmware version. I'm on 9.0.0.270 and my network settings looks like this:
@Jan Philipp
Check that thread
https://forum.xda-developers.com/showthread.php?t=3887486
oslo83 said:
@Jan Philipp
Check that thread
https://forum.xda-developers.com/showthread.php?t=3887486
Click to expand...
Click to collapse
Thank you very much. But the link should already have been in your first post! The screenshot alone isn't very helpful without the instructions to activate this very special menu.
Same problem and that's not helpful. 2G is very not security for now. I want choose no signal rather than 2G
pikuer said:
Same problem and that's not helpful. 2G is very not security for now. I want choose no signal rather than 2G
Click to expand...
Click to collapse
The issue is not relevant since 2017.
According to the media news and Wikipedia 2G has been superseded by newer technologies such as 2.5G, 2.75G, 3G, 4G and 5G; however, 2G networks are still used in most parts of the world. Various carriers have made announcements that 2G technology in the United States is in the process of being shut down so that carriers can reclaim those radio bands and re-purpose them for newer technologies (e.g. 4G LTE).
Honestly for two years I haven't seen 2G on my device even when traveling. The rest of the countries who still might be using it will shut it down soon.
Related
as i know N920P is with LTE Band 1800 and 2600 from what i check from some site. after i unlock this unit , it still only runs on 3G
anyone here encounter the same as me too ? how to enable the LTE or the set actually doesnt comes with LTE in GSM only Runs on CDMA LTE ?
anyone can clarified ?
thanks .
kit_kit said:
as i know N920P is with LTE Band 1800 and 2600 from what i check from some site. after i unlock this unit , it still only runs on 3G
anyone here encounter the same as me too ? how to enable the LTE or the set actually doesnt comes with LTE in GSM only Runs on CDMA LTE ?
anyone can clarified ?
thanks .
Click to expand...
Click to collapse
- make sure network mode is set to automatic
- ##data#
- edit
- LTE
- LTE Roaming enable
- check the box - let it sit for a minute or reboot and you should be good.
rogerandgina said:
- make sure network mode is set to automatic
- ##data#
- edit
- LTE
- LTE Roaming enable
- check the box - let it sit for a minute or reboot and you should be good.
Click to expand...
Click to collapse
After i check LTE enable ,
network mode is automatically change to LTE/CDMA , there is no network after all .
kit_kit said:
After i check LTE enable ,
network mode is automatically change to LTE/CDMA , there is no network after all .
Click to expand...
Click to collapse
Do you have the correct apn? These are for at&t:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rogerandgina said:
Do you have the correct apn? These are for at&t:
View attachment 3807884
View attachment 3807885
Click to expand...
Click to collapse
i am not in US. i guess i have the right APN which my 3G is working well .
AT&T is not using band 1800 , 2600 i guess .
any guys encounter the same ?
I'm having a weird issue in which I only get H+ data on the first boot after flashing the stock ROM. Does anyone know how to fix this?
xMotoDA said:
I'm having a weird issue in which I only get H+ data on the first boot after flashing the stock ROM. Does anyone know how to fix this?
Click to expand...
Click to collapse
Not sure what your asking here... What are you supposed to be getting?
xMotoDA said:
I'm having a weird issue in which I only get H+ data on the first boot after flashing the stock ROM. Does anyone know how to fix this?
Click to expand...
Click to collapse
You can try to check these options below:
1 - Go to Settings / SIM Cards - choose your SIM and check the Preferred Network Type
2 - Check with your service provider if you have hired any data packet or anything, the LTE option may be disabled by them.
3 - Check if this is not a common bug in custom rom.
4 - Perhaps the day today is without a network signal, it is in passing.
I hope even if it is not hardware failure in their slots, I hope I have helped.
Not sure what your asking here... What are you supposed to be getting?
Click to expand...
Click to collapse
HSPA/HSPA+ cellular data.
xMotoDA said:
HSPA/HSPA+ cellular data.
Click to expand...
Click to collapse
Check cell mode and APN
To add additional information:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what I get after flashing factory images.
Phone info shows:
Neighboring CID: []
GSM service: In service
GPRS service: Disconnected
Network type: HSPAP,Unknown
And this is what I get after a reboot.
Phone info now shows:
Neighboring CID: no neighboring cells
GSM service: In service
GPRS service: Connected
Network type: UMTS,Unknown
The original firmware it came with doesn't have this bug, but I don't have a backup.
Also, I don't have LTE signal because my XT1543 doesn't support band 2 which my carrier uses. Has anyone had any luck enabling LTE bands?
xMotoDA said:
Also, I don't have LTE signal because my XT1543 doesn't support band 2 which my carrier uses. Has anyone had any luck enabling LTE bands?
Click to expand...
Click to collapse
No, not possible.
xMotoDA said:
I'm having a weird issue in which I only get H+ data on the first boot after flashing the stock ROM. Does anyone know how to fix this?
Click to expand...
Click to collapse
I had a similar problem. You can enter in to engineer menu *#*#4636#*#* and swith "GSM only" to "WCDMA"
and it works good: H+(3G) and LTE (4G)
izmenoff said:
I had a similar problem. You can enter in to engineer menu *#*#4636#*#* and swith "GSM only" to "WCDMA"
and it works good: H+(3G) and LTE (4G)
Click to expand...
Click to collapse
It automatically goes back to GSM.
Is it Possible to Enable LTE Band 1 (2100Mhz) in Moto XT1225? I have tried editing NV values in 06828 and 06829 which enables LTE Band 1 but, it's of no use. I still couldn't use LTE Band 1. Vodafone India uses LTE Band 1. Looks like it hasn't been enabled. Is there any other way or chance to enable it? I'm in crDroid Android based on CM14.1 with @bhb27 kernal.
My ROM:
https://forum.xda-developers.com/moto-maxx/development/rom-crdroid-android-t3491257
Please Help.
Thanks.
gokkul.v said:
Is it Possible to Enable LTE Band 1 (2100Mhz) in Moto XT1225? I have tried editing NV values in 06828 and 06829 which enables LTE Band 1 but, it's of no use. I still couldn't use LTE Band 1. Vodafone India uses LTE Band 1. Looks like it hasn't been enabled. Is there any other way or chance to enable it? I'm in crDroid Android based on CM14.1 with @bhb27 kernal.
My ROM:
https://forum.xda-developers.com/moto-maxx/development/rom-crdroid-android-t3491257
Please Help.
Thanks.
Click to expand...
Click to collapse
Probably not. But you can see what all I did here. However, seems like you have done the same.
https://forum.xda-developers.com/showthread.php?t=2986947
Start there with post #7.
ChazzMatt said:
Probably not. But you can see what all I did here. However, seems like you have done the same.
https://forum.xda-developers.com/showthread.php?t=2986947
Start there with post #7.
Click to expand...
Click to collapse
yeah! I did the same. but do I wanna write same value to the second row like first row in 06828/29?? or wanna leave it as 0? Coz I wrote same values in all rows in 06828/29.
ChazzMatt said:
Probably not. But you can see what all I did here. However, seems like you have done the same.
https://forum.xda-developers.com/showthread.php?t=2986947
Start there with post #7.
Click to expand...
Click to collapse
After flashing those values I visited Vodafone store and a person there showed me the their CRM. the values which I wrote are seen in their CRM.
And I have a doubt.
I visited Vodafone Store and confirmed that they transmit 2G in 900Mhz, 3G in 1800Mhz and 4G in 2100Mhz in India.
My phone operates in 2100Mhz Band when I select 3G, and 1800Mhz in 2G. And no signal in 4G.
Is it possible to operate in such bands? Or since my phone as 2100Mhz support in Both 3G and 4G, the 4G is being used as 3G thinking it's 3G?
Please Help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You got any issue with VoLTE or Wifi-Calling?
I had this problem. Oddly what solved it was removing the sim and factory reseting then putting the sim back in. Volte finally worked after that. Seems like a bug in OxygenOS
No Wifi-Calling?
WiFi calling works without issue
LandLockedPH said:
WiFi calling works without issue
Click to expand...
Click to collapse
Any particular app to use for WiFi calling??
Sent from my [device_name] using XDA-Developers Legacy app
humayunarshad said:
Any particular app to use for WiFi calling??
Click to expand...
Click to collapse
no u just switch it on an wwn u are near a wifi it will make call from that an recived sms an mms
-fluffy- said:
no u just switch it on an wwn u are near a wifi it will make call from that an recived sms an mms
Click to expand...
Click to collapse
How to switch?
Can you let me know please?
ambuj22263 said:
How to switch?
Can you let me know please?
Click to expand...
Click to collapse
what do u mean switch
u just actived it under settings/network/simcard provider
then u can set it to use volte or vowifi
as standart
You guys have stable Wifi-Calling connection?
Yes. I've had no issues with T-Mobile WiFi calling. Works fine.
@LandLockedPH T-Mobile US??
Quick update...
I went ahead and pulled the trigger on the OP7 (non-Pro).
I'm using a T-Mobile SIM (Sim 1) and AT&T SIM (Sim 2).
I can confirm that I"m getting VOLTE on both SIM's and VOWiFi on the T-Mobile SIM.
Really happy with the device!
I know not band 71 but how about 66?
Vowifi doesn't work on vzw
Does firmware for gm1905 exist? I'm thinking this also opens bands 66 and 71.
Sent from my SM-G975U using Tapatalk
I don't think however carrier aggregation works with the op7 and TMobile USA.
I ran a few ookla speed tests compared to my s10+ using mobile data only. Long story short the S10 would average download at approx 90mbps and the OP7 around 35mpbs.
The only way I could get the S10+ to attain similar figures to the OP7 was for me to disable LTE bands 2, 12 and 66 . In essence making it just use just band 4. Then the download speeds were similar.
On side a side note, having wifi calling enabled slowed the tests results further as you can see by the lower earlier results. Attached screen shot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GM1900 using Tapatalk
LandLockedPH said:
Yes. I've had no issues with T-Mobile WiFi calling. Works fine.
Click to expand...
Click to collapse
It would have been nice if there was a clear indicator that one was making a wifi calling is ready. Due to the notch I have disabled a few status bar icons including viofa and Volte. When placing a wifi call I have swipe down to check it it's wifi calling or not lolz
Sent from my GM1900 using Tapatalk
I bought this unlocked from Amazon. Using boost mobile infinite
I called boost they said it should be able to be done from the phone
I called Motorola they said call boost
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is your model number? Is this a 5G Plus, or Stylus, or...?
We have device specific sections that you'll probably get more help in, so if we know where this thread needs to go, we can move it for you.
V0latyle said:
What is your model number? Is this a 5G Plus, or Stylus, or...?
We have device specific sections that you'll probably get more help in, so if we know where this thread needs to go, we can move it for you.
Click to expand...
Click to collapse
It's regular moto g 5g 2022 that is the model name.
You should have a toggle for 'Allow 5G' that will do what you want. If not, use the dial code *#*#4636#*#* and pick an appropriate config under Phone information -> Set Preferred Network Type that does not start with 'NR'.
fddm said:
You should have a toggle for 'Allow 5G' that will do what you want. If not, use the dial code *#*#4636#*#* and pick an appropriate config under Phone information -> Set Preferred Network Type that does not start with 'NR'.
Click to expand...
Click to collapse
Awesome. Where can I find the breakdowns of each network type. Which one is 3g. I think 4g is LTE
On the TMO network 2G is GSM, 3G is WCDMA, LTE is 4G, and NR is 5G. CDMA/EvDo would be for Verizon 2G/3G. TDSCDMA was developed in China so you won't see it deployed in the US.
fddm said:
On the TMO network 2G is GSM, 3G is WCDMA, LTE is 4G, and NR is 5G. CDMA/EvDo would be for Verizon 3G/4G. TDSCDMA was developed in China so you won't see it deployed in the US.
Click to expand...
Click to collapse
Blessings. Much appreciated. Have a great day