Hi guys,
I have flashed my phone with H990N while my phone is H990DS, what happened is I lost IMEI numbers.
Now I can see IMEIs as Zeros.
I have been searching for a way to return them back but without success. I have the numbers written behind the battery, but don't know how to put them on the firmware.
I tried even dumping my wife mobile firmware and flash it to my phone, didn't work.
The best solution so far it to write only one IMEI through crcwizard test.
Appreciate your kind support.
Best regards...
I highly doubt flashing the H990N firmware corrupted your IMEI numbers (I have cross-flashed H990N & H990DS on my v20 numerous times).
You need to have valid backups of your MISC, PERSIST, MODEMST1 & MODEMST2 partitions which you need to reinstate.
If you don't you will need help elsewhere outside xda, because any discussion involving manually modifying IMEI is forbidden in this forum, even for legitimate reasons...
MaZeNsMz said:
Hi guys,
I have flashed my phone with H990N while my phone is H990DS, what happened is I lost IMEI numbers.
Now I can see IMEIs as Zeros.
I have been searching for a way to return them back but without success. I have the numbers written behind the battery, but don't know how to put them on the firmware.
I tried even dumping my wife mobile firmware and flash it to my phone, didn't work.
The best solution so far it to write only one IMEI through crcwizard test.
Appreciate your kind support.
Best regards...
Click to expand...
Click to collapse
Dont you have efs backup? If not, than reflash the h990ds kdz, problem will be solved, h990n kdz greater tha 20d cause such issues,
hahmad78 said:
Dont you have efs backup? If not, than reflash the h990ds kdz, problem will be solved, h990n kdz greater tha 20d cause such issues,
Click to expand...
Click to collapse
Unfortunately no backup, do U recommend to use kdzwriter or LGUP to flash H990N?!
Go to this link and follow any method.
https://www.theandroidsoul.com/fix-empty-imei-corrupted-efs-no-sim-unknown-baseband-wifibluetooth-issues-restoring-twrp-backup/
MaZeNsMz said:
Unfortunately no backup, do U recommend to use kdzwriter or LGUP to flash H990N?!
Click to expand...
Click to collapse
I would recommend lg up and flash original model kdz h990ds. And than make a. Complete backup than do anything
Related
Hi all,
My Moto G XT1032 have Unlocked Bootloader CWM recovery and is rooted, running CWM room v 11.
Phone lost IMEI code after flashing with diffrent roms, now I don't have mobile reception, wifi and bluetooth is working fine.
I had similar issue with Gionee E6 but I found imei file in the phone and recreate IMEI number.
In Moto G I can't find imei file so don't know hot to fix this.
Please let me know how to recover IMEI number.
I hope that someone know how to do it.
Many thanks
Chris
Chris.G said:
Hi all,
My Moto G XT1032 have Unlocked Bootloader CWM recovery and is rooted, running CWM room v 11.
Phone lost IMEI code after flashing with diffrent roms, now I don't have mobile reception, wifi and bluetooth is working fine.
I had similar issue with Gionee E6 but I found imei file in the phone and recreate IMEI number.
In Moto G I can't find imei file so don't know hot to fix this.
Please let me know how to recover IMEI number.
I hope that someone know how to do it.
Many thanks
Chris
Click to expand...
Click to collapse
I do not believe that no one knows how to do it.
Please help me
Chris
I've never heard of this before and it seems extreme that you could lose IMEI number just by flashing a custom ROM. What method did you use?
I would have assumed fastboot flashing stock firmware should solve this.
http://forum.xda-developers.com/showthread.php?t=2546251
lost101 said:
I've never heard of this before and it seems extreme that you could lose IMEI number just by flashing a custom ROM. What method did you use?
I would have assumed fastboot flashing stock firmware should solve this.
http://forum.xda-developers.com/showthread.php?t=2546251
Click to expand...
Click to collapse
Hi Sorry for late reply but I lost internet connection on Saturday morning.
When I have been doing some stuff in CWM recovery, had system and data partition mounted.
Then done rm -R * in root dir.
At this point I thought that my current dir is tmp.
After this I lost wifi and IMEI.
I manage to sort out wifi but not IMEI code.
Do you know how to fix this?
Since that I have been re-flashing stock rom and CWM rom but none of them help.
Chris
anyone can help to recover IMEI ?
Thanks
Changing/manually setting the IMEI is illegal afaik. And afaik assisting someone with that is also forbidden here on xda. We used to have a similar problem on the phone I came from, and there was a app which let you backup/restore your IMEI. You need to have a backup in order to restore it so this won't really help you...
This is what I'm talking about: http://forum.xda-developers.com/showthread.php?t=1591997
Edit.: There actually seems to be a way to manually set it but I'm not sure if it is device-specific.
Sent from my XT1032 using xda app-developers app
You can find your Imei on the back of the phone.
If you google android 4.4 set imei you should find something from technostall which might help you
Good luck
Yes, it's on the battery.
Chris.G said:
Hi all,
My Moto G XT1032 have Unlocked Bootloader CWM recovery and is rooted, running CWM room v 11.
Phone lost IMEI code after flashing with diffrent roms, now I don't have mobile reception, wifi and bluetooth is working fine.
I had similar issue with Gionee E6 but I found imei file in the phone and recreate IMEI number.
In Moto G I can't find imei file so don't know hot to fix this.
Please let me know how to recover IMEI number.
I hope that someone know how to do it.
Many thanks
Chris
Click to expand...
Click to collapse
Hi, I have the same problem, how to you solved that...
herbesi01 said:
Hi, I have the same problem, how to you solved that...
Click to expand...
Click to collapse
I haven't.
I tried to sole this issues re-flashing with different roms, but after several operations it bricked.
It's totally dead, not charging, in linux I can't see device connected, so i think that is dead.
I bought new one.
Good luck with this problem.
Chris.G said:
I haven't.
I tried to sole this issues re-flashing with different roms, but after several operations it bricked.
It's totally dead, not charging, in linux I can't see device connected, so i think that is dead.
I bought new one.
Good luck with this problem.
Click to expand...
Click to collapse
I solved the problem, place to charge the phone, let him take some of the load and flash the original ROM, after that flash CM11, and run perfectmente, I think at first it was because I had done without the SIM, the second time you make with the SIM sunset ...
herbesi01 said:
I solved the problem, place to charge the phone, let him take some of the load and flash the original ROM, after that flash CM11, and run perfectmente, I think at first it was because I had done without the SIM, the second time you make with the SIM sunset ...
Click to expand...
Click to collapse
Perfectemente? Sunset?
Gesendet von meinem XT1032 mit Tapatalk
Any news?..
Gesendet von meinem XT1032 mit Tapatalk
Sooo, a solution to restore IMEI without save file does exist ?
Chris.G said:
Hi all,
My Moto G XT1032 have Unlocked Bootloader CWM recovery and is rooted, running CWM room v 11.
Phone lost IMEI code after flashing with diffrent roms, now I don't have mobile reception, wifi and bluetooth is working fine.
I had similar issue with Gionee E6 but I found imei file in the phone and recreate IMEI number.
In Moto G I can't find imei file so don't know hot to fix this.
Please let me know how to recover IMEI number.
I hope that someone know how to do it.
Many thanks
Chris
Click to expand...
Click to collapse
I had same problem with my previous device , manually restored imei on my previous device which was Micromax A116 by using Engineer/Service mode dialing *#*#3646633#*#* which works for all MTK device
Dont know code for moto g
my current device is moto g PM me if you get any useful info or serice mode code
Thanks
Btw take a look at this this might help you
http://forum.xda-developers.com/showthread.php?t=1960918
please note i havent tried it for moto g.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Press Thanks if my precious time saved yours ...
---------- Post added at 12:43 AM ---------- Previous post was at 12:36 AM ----------
rgonera said:
Sooo, a solution to restore IMEI without save file does exist ?
Click to expand...
Click to collapse
Yes It Does for most of the devices given you should know the proper method.
Mtk is different. It's not the same thing.
Any news?
Also I think the problem is that the imei is on the phone just not on the OS? (obviously, but...)
Maybe when we all reflashed to the original stock (and countless other stocks) they just didn't have the proper folder to access in order to identify what imei they're assigned?
Because every single time I've tried to manually rewrite the imei to it all the methods I've used are futile. Even the ones specially tailored to the Moto G's hardware SnapDragon - Qualcomm...
restore IMEI by Motorola service?
Same problem for me. I am really interested in some experience about restoring IMEI.
Motorola support phorum owner replied that Motorola service can recover IMEI (not covered by any kind of warranty of course).
I have tried to reflash factory ROM with and without inserted SIM card, but unfortunately no difference.
I have seen looking for solution, that for some people Android system sees IMEI=0, but the IME is still untouched using fastboot mode and "fastboot getvar" CLI command
For me it's empty using the "getvar" command as well.
The official service center in Germany told me that they mustn't repair selfmade imei problems :S
Lost IMEI
You could all try this new method claimed to be working but as I have not lost my IMEI I can't say, please report back if it works for you?
http://forum.xda-developers.com/moto-g/help/how-to-test-restore-lost-imei-imei0-t2860481
Hi. I'm lost. I've bricked my freshly purchased H950 because of being in haste to update the firmware to 5.1.1. I've accidentally installed a H955 KDZ over my stock 5.0.1 AT&T H950 firmware. As expected, the device is bricked (everything works except the cell network). I've tried everything, spent about 8 hours with no result. Can't root it as well.
The IMEI and Baseband status is "Unknown" (lost EFS partitions).
Please, if it;s possible, give me an advice how to restore it to its original ATT firmware. I know that ATT hasn't published the TOT file of their firmware. Maybe I could restore it using someone's backed up files?
I'm outside of the US for the next 7 months so I won't be able to return it
Please help me, this is urgent.
okornel said:
Hi. I'm lost. I've bricked my freshly purchased H950 because of being in haste to update the firmware to 5.1.1. I've accidentally installed a H955 KDZ over my stock 5.0.1 AT&T H950 firmware. As expected, the device is bricked (everything works except the cell network). I've tried everything, spent about 8 hours with no result. Can't root it as well.
The IMEI and Baseband status is "Unknown" (lost EFS partitions).
Please, if it;s possible, give me an advice how to restore it to its original ATT firmware. I know that ATT hasn't published the TOT file of their firmware. Maybe I could restore it using someone's backed up files?
I'm outside of the US for the next 7 months so I won't be able to return it
Please help me, this is urgent.
Click to expand...
Click to collapse
Well the good new is that your cell phone works so it is not brick. Cell network probably doesnt work because H955 use different bands than H950. I dont think you will be able to go back to ATT rom because like you mentioned there is no kdz for it. But on the bright side you can try to use the H950PR KDZ to flash your cell. this is totally compatible with the H950 from ATT. You can always wait for the someone more knowledgeable to answer but I am almost sure that it should work.
http://forum.xda-developers.com/g-flex2/general/kdz-compatible-att-h950-t3180847
I've installed the h950pr and there the cell network is still not working
In case if i find a person who has a similar device with Att firmware, how can i make a backup of it in order to flash my device?
I've managed to root my semi-bricked H950. But the imei and baseband version are still unknown. What should I do?
baseband ok. just the imei has 0 value. help please
okornel said:
baseband ok. just the imei has 0 value. help please
Click to expand...
Click to collapse
follow THIS guide and you should be ok.
Use your own imei embedded in the back of the phone or the original box.
Alex_XV6700 said:
follow THIS guide and you should be ok.
Use your own imei embedded in the back of the phone or the original box.
Click to expand...
Click to collapse
tried that, but i get stuck. when adding my port in QPST it says "No phone".
https://onedrive.live.com/redir?res...authkey=!AD1mJswhhQlnJMM&v=3&ithint=photo,png
okornel said:
tried that, but i get stuck. when adding my port in QPST it says "No phone".
https://onedrive.live.com/redir?res...authkey=!AD1mJswhhQlnJMM&v=3&ithint=photo,png
Click to expand...
Click to collapse
Check your PM.
Does anybody know how to write IMEI on the H950 without octopus box? Can't do it in QPST, DFS, EFS pro because it sn't recognized as a phone / doesn't answer.
Everything works, I can even make calls, just the imei value is 0.
Finally I did it!!!
okornel said:
Finally I did it!!!
Click to expand...
Click to collapse
Did you use qpst? Or which tool?
Alex_XV6700 said:
Did you use qpst? Or which tool?
Click to expand...
Click to collapse
Yeah. I used QPST. I had to open cmd, enter "adb shell", then " su", then "echo 1 > /sys/devices/platform/lg_diag_cmd/diag_enable". After that you can backup Nv via QPST.
Im glad you informed yourself and solved your own issue. ?
Hi guys!
Yesterday my firmware update went terribly wrong and now I have a device that states that imei and baseband are unknown, so I my both sim-cards don't work.
I've tried several types of IMEI restoration, but none of them worked.
Unfortunately I don't have any backup for nvram. So, my guess is that there is a problem with EFS partition on the phone.
In QPST NV RF Manager I see my real IMEI from the box, so I guess it is still present, but my baseband doesn't work. Can you please suggest any help on recovering the baseband? Or if it is possible share with me modem backup or nvram backup without IMEI (I've seen on this forum that one guy with Samsung S3 had a kind of the same problem and he was given a working nvram backup without IMEI (IMEI was 0/00)) I can write my IMEI then, if baseband works again. Will appreciate any help.
Send it back. Only the oem is legally able to mess with the IMEI.
zelendel said:
Send it back. Only the oem is legally able to mess with the IMEI.
Click to expand...
Click to collapse
Well... I have managed to make it work again and my original IMEI is back. The only thing I had to do is to restore a working NVRAM backup (from another device) via QPST. So, it wasn't that hard. Much simpler than sending it back to China.
landslider said:
Well... I have managed to make it work again and my original IMEI is back. The only thing I had to do is to restore a working NVRAM backup (from another device) via QPST. So, it wasn't that hard. Much simpler than sending it back to China.
Click to expand...
Click to collapse
If you restored the file from another device then it won't have the right IMEI.
zelendel said:
If you restored the file from another device then it won't have the right IMEI.
Click to expand...
Click to collapse
It HAS right IMEI, I checked it with the original box. No need to put up an argument about it. Both devices (mine and the one which was backupped and restored from) are working fine, bot have ORIGINAL IMEI numbers and no errors considering networks or MI accounts. So, actually I have no idea what you are trying to tell me.
landslider said:
It HAS right IMEI, I checked it with the original box. No need to put up an argument about it. Both devices (mine and the one which was backupped and restored from) are working fine, bot have ORIGINAL IMEI numbers and no errors considering networks or MI accounts. So, actually I have no idea what you are trying to tell me.
Click to expand...
Click to collapse
I'm not making an argument. I'm trying to figure out how a number which is supposed to be hard coded into the file is then restored by restoring the files from a different device.
As these devices are not sold in the states learning as much as possible is a good thing.
Glad you got it working.
zelendel said:
I'm not making an argument. I'm trying to figure out how a number which is supposed to be hard coded into the file is then restored by restoring the files from a different device.
As these devices are not sold in the states learning as much as possible is a good thing.
Glad you got it working.
Click to expand...
Click to collapse
Okay, sorry. I will try to make it a bit clearer=) This device is not sold in Russia either (officially at least), so the only way to get it is to buy from aliexpress or ebay or anything else. In that case the buyer doesn't get any guarantee or official support. So if the device is broken and can't be restored it turns into a garbage. I believe that in the US the situation with that kind of devices is almost the same.
Now, if You are not familiar with QPST it is a software package for qualcomm based devices which can make backup/restore of some non-firmware software from the device (like IMEI, ESN, Baseband, LTE Channels etc). As for IMEI number, basically, as You've said it is hard coded into device so it is pretty hard to get it changed or fully deleted. Here we come to my case of unknown Baseband and IMEI. Though via phone settings I could see: "Unknown", my IMEI didn't change and was stored in the device. The "error" or smth like that happened after the factory reset and my guess is that the file structure of NVRAM was changed. So, backup of NVRAM taken from the working device didn't actually have IMEI or ESN in it, but it has the right file structure without any errors. That is what happened, the file structure was restored without changing any factory numbers.
If you have any questions, feel free to ask
landslider said:
Okay, sorry. I will try to make it a bit clearer=) This device is not sold in Russia either (officially at least), so the only way to get it is to buy from aliexpress or ebay or anything else. In that case the buyer doesn't get any guarantee or official support. So if the device is broken and can't be restored it turns into a garbage. I believe that in the US the situation with that kind of devices is almost the same.
Now, if You are not familiar with QPST it is a software package for qualcomm based devices which can make backup/restore of some non-firmware software from the device (like IMEI, ESN, Baseband, LTE Channels etc). As for IMEI number, basically, as You've said it is hard coded into device so it is pretty hard to get it changed or fully deleted. Here we come to my case of unknown Baseband and IMEI. Though via phone settings I could see: "Unknown", my IMEI didn't change and was stored in the device. The "error" or smth like that happened after the factory reset and my guess is that the file structure of NVRAM was changed. So, backup of NVRAM taken from the working device didn't actually have IMEI or ESN in it, but it has the right file structure without any errors. That is what happened, the file structure was restored without changing any factory numbers.
If you have any questions, feel free to ask
Click to expand...
Click to collapse
It is almost the same with a few exceptions. One being that their devices are banned from all people that work for the government, sometimes they get stopped at customs due to copyright issues and with the latest news about them coming loaded with malware, most won't buy them.
That makes sense in a way. Not sure why a factory reset would mess up that part of the device as it shouldn't touch it.
Thanks for the info.
zelendel said:
Not sure why a factory reset would mess up that part of the device as it shouldn't touch it.
Click to expand...
Click to collapse
I don't know either, but it was an unforgettable experience and a lesson to do backups of everything.
Hi @landslider, what's up friend? I have the same problem but I have no backup hidden partitions. Could you help me fix my device?
harolete said:
Hi @landslider, what's up friend? I have the same problem but I have no backup hidden partitions. Could you help me fix my device?
Click to expand...
Click to collapse
Hi! Have you tried flashing China developer rom with Miflash?
Second option: Connect to your PC and run QPST according to one of the manuals (in order for your phone to show up as a COM), run RF NV Manager and look up your line 550 NV_IMEI if it is filled with numbers that are the same as on your box (check HEX above them and numbers should resemble yours from box but written in opposite direction, eg: on the box it is XXXX69XXXXX in the QPST it will be 96). So, if your IMEI is at its place than all you need is a working device from someone to make a backup. Backup must be made in newer versions of QPST in *.xqcn format and than restored to your phone with checked box "allow ESN mismatch"
landslider said:
Well... I have managed to make it work again and my original IMEI is back. The only thing I had to do is to restore a working NVRAM backup (from another device) via QPST. So, it wasn't that hard. Much simpler than sending it back to China.
Click to expand...
Click to collapse
Could you teach me how to do that? how can i make nvram backup via other mi4c? and how can i put it into my mi4c ?? as i am not good at computer so i need your detailed explanation. I would be very glad if you help me.....
landslider said:
Okay, sorry. I will try to make it a bit clearer=) This device is not sold in Russia either (officially at least), so the only way to get it is to buy from aliexpress or ebay or anything else. In that case the buyer doesn't get any guarantee or official support. So if the device is broken and can't be restored it turns into a garbage. I believe that in the US the situation with that kind of devices is almost the same.
Now, if You are not familiar with QPST it is a software package for qualcomm based devices which can make backup/restore of some non-firmware software from the device (like IMEI, ESN, Baseband, LTE Channels etc). As for IMEI number, basically, as You've said it is hard coded into device so it is pretty hard to get it changed or fully deleted. Here we come to my case of unknown Baseband and IMEI. Though via phone settings I could see: "Unknown", my IMEI didn't change and was stored in the device. The "error" or smth like that happened after the factory reset and my guess is that the file structure of NVRAM was changed. So, backup of NVRAM taken from the working device didn't actually have IMEI or ESN in it, but it has the right file structure without any errors. That is what happened, the file structure was restored without changing any factory numbers.
If you have any questions, feel free to ask
Click to expand...
Click to collapse
so can you please upload that xqcn file from the working device ? i have the same issue and i can't find a working mi4c inn my area !
spybit2008 said:
so can you please upload that xqcn file from the working device ? i have the same issue and i can't find a working mi4c inn my area !
Click to expand...
Click to collapse
Hi! Unfortunately no, I can't. I don't have xiaomi mi4c anymore
spybit2008 said:
so can you please upload that xqcn file from the working device ? i have the same issue and i can't find a working mi4c inn my area !
Click to expand...
Click to collapse
http:/ en.miui.com thread-315233-1-1.html (replace whitespaces with slash)
There is a thread in official forum where one guy shares qcn backup. There is also an instruction to restore IMEI and baseband. But It doesn't help for me. Network still unavailable.
Hello Guys, this forum is my last hope. I have a problem with my S7 (DBT Germany), I think after flashing an older stock rom and going back to newest, something happened that my phone doesn't detect any sim cards anymore. If I type *#06# , it only shows the SN Number, no IMEI. WIFI still works without problem, but I can not use my sim card anymore, so it's pretty useless now :crying:
The sim card works on another devices, so it's for sure a problem with my s7, I might have messed up something. What do you think is here the problem and how can I solve it? Any help is much appreciated, I really hope to fix this because my phone is only 2 weeks old.
I currently have the latest Firmware for DBT from updato, (December 14, 2017 for Android 7.0)
IMEI = unknown
SIM Card status: Not avaliable
Have you tried a stock ROM from sammobile.com? Updato and sammobile.com should have the same ROM but maybe there is a difference between the 2?
Did you confirm that the phone is running the latest modem?
audit13 said:
Have you tried a stock ROM from sammobile.com? Updato and sammobile.com should have the same ROM but maybe there is a difference between the 2?
Did you confirm that the phone is running the latest modem?
Click to expand...
Click to collapse
I did not try sammobile because updato and sammobile were the same firmware. Sammobile does have a newer firmware from 28/01 but it says I need to join in order to download.
Is there a way I can fix a damaged/corrupted EFS ? My phone is pretty useless now without sim card detection
Sorry, I know of no way to fix imei issue if a combination of Odin and a stock ROM does not work. You may have to take it to a cell repair shop that can force flash the ROM and EFS using hardware like an octopus box: https://octopusbox.com/eng/features/models
audit13 said:
Sorry, I know of no way to fix imei issue if a combination of Odin and a stock ROM does not work. You may have to take it to a cell repair shop that can force flash the ROM and EFS using hardware like an octopus box: https://octopusbox.com/eng/features/models
Click to expand...
Click to collapse
Hey, flashing a Stock Rom with Odin + Root works for me with no problem, how can I flash my EFS? I do know my S/N and IMEI number..
Do you have an EFS backup? If yes, this may help: https://forum.xda-developers.com/showpost.php?p=72355071&postcount=3
audit13 said:
Do you have an EFS backup? If yes, this may help: https://forum.xda-developers.com/showpost.php?p=72355071&postcount=3
Click to expand...
Click to collapse
I don't have an EFS backup. Any chance without a backup? I do know my S/N and IMEI...
You would need a way to recreate the contents of the folder. Unfortunately, I'm not sure how to create the contents.
Maybe this will help: https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
audit13 said:
You would need a way to recreate the contents of the folder. Unfortunately, I'm not sure how to create the contents.
Maybe this will help: https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
Click to expand...
Click to collapse
Hey, I have finally found the solution and my sim card is working again :victory:
It really was just that the firmware was 1 version older.. I downloaded the latest DBT Firmware from samsung-updates (Build Date: 15/01/2018)
Put Bootloader to BL , AP to AP , CP to CP , CSC (not Home_CSC!) to CSC , flashed it and finally my IMEI etc. is back.
Thank you for taking your time trying to help me
Congratulations on your success
My OP 8T after converted to EU and update to ColorOS 12 suddenly lost it's IMEI. I tried to rollback to OOS11 even to stock TMO but still can not fix the IMEi. Baseband is still there, device still can recognize SIM's services but no IMEI and device can't make phone calls.
It may caused because my device's EFS partitions are damaged. I tried to look everywhere to find solutions but still no luck. If anyone know any leads, please kindly help to inform.
Thanks a lot mate.
LinhBT said:
My OP 8T after converted to EU and update to ColorOS 12 suddenly lost it's IMEI. I tried to rollback to OOS11 even to stock TMO but still can not fix the IMEi. Baseband is still there, device still can recognize SIM's services but no IMEI and device can't make phone calls.
It may caused because my device's EFS partitions are damaged. I tried to look everywhere to find solutions but still no luck. If anyone know any leads, please kindly help to inform.
Thanks a lot mate.
Click to expand...
Click to collapse
Check if you have backup of persist partition stored locally, or it has internal backup on another partition (look on partition names). Critical partitions sometimes have backups.