Below is the procedure to FACTORY REST, ROOT AND MArket installation for COBY KYROS MID7010 or MID 7010 Tablet owners stuck at white boot screen OR android OS not loading after any manipulation with the firmware OR interested in rooting and installing google market.
FACTORY RESET Steps:
1. Turn OFF the device
2. Make sure its turned OFF
3. Press and hold simultaneously POWER + BACK + HOME buttons (as in third Pic)
4. The device turns on with COBY logo, keep pressing......
5. After about 15 to 20 seconds the COBY LOGO display changes and prompts to press the keys again within 5 secs to factory reset the device.
6. LEAVE the power button now while still pressing HOME and BACK keys
7. FActory reset is initiated!
TO INSTALL MARKET AND ROOT:
1. Enable adb debugging on your tablet,connect to pc wait for driver installation if any. Run SuperOneClickv2.3.2-ShortFuse.zip > choose advance> driver install
2. Will prompt to force install drivers ( if the adb device drivers not available), accept and sit back! the program will not respond for a while 10-15mins and prompts back that the drivers are installed.
3. Run root from the above software (clicking root tab)
4. Open root explorer or any file browser accepting root, browse to system/app copy all files in attached folder (apks) here, if prompts to rewrite( do not allow!)
5. Change permissions of the copied files as in other apks in system/app folder.
6. Google market app appears in app drawer.
7. Run and Enjoy!
thnks for the useful thred
thanks a lot for this thred since no one is taking care of this model "7010" .. my kyros 7010 stop working and freez on android booting screen a did the method you post here but i got this message
" Unexpected updater mode! Pleas reboot your device"
could you pleas support me with any help since i am olmost about to lose the hope to get my Kyros back to life
Follow the buttons, you arent pressing hard the back button. its HOME + BACK+POWER all three buttons altogether. until the coby screen changes to reset request as in pics. Ask someone to press the power button while you press the front two. UNTIL THE COBY LOGO display changes (15 to 20 seconds).
the same problem
really i tryed it ten times and got the same message " unexpectaed updater mode please reboot your device"
it gives me Penguin logo "Linux logo" befor this message - this logo is normally comes even befor it stop working
pressing the power button + home button only displays your message. You are definitely not pressing back button hard enough or its broken?!?. TRy pressing power than reset pin at back together. a white screen appears release both buttons and try the three button combination again.
YOU must apply steady pressure on the three buttons for 20 seconds till the coby logo screen automatically changes. Ask someone else to help you with it. THIS KEY COMBINATION DEFINITELY WORKS!
the same problem
i did the power + reset and yes it gives me a white screen then use the three buttons "i am sure i pressed them well"
the coby logo screen changes to Penguin logo "Linux logo" and it gives me the same message
i feel that i am breaking your head but you are the only hope that i have no more help on this model .. so can i do that throw ADB i did root it using adb and whin i tybe # recovery it gives me (android system recovery <e3>) with 3 choces to restor or reboot somthing like that but non of them are working i can choose between them but i cant select or confirm i tried all the buttons but no action
when do you release the three buttons? Are you sure its mid 7010 there is no recovery rom partition in mid7010 as far as i know.
i releas them after i swe the message "unexpectaed updater mode please reboot your device" and i try to wait more than one min as well
and yes i am sure it is coby kyros MID 7010. i got it from Dubai as a present
i know there is no recovery partition as i read it a lot on the internet.
so do u have any recovery rom for that model or any other way to install system on it???
Since there is no recovery partition than A kernel is required to repartion the partition table WHICH IS NOT EASY and since there is a way to factory reset why would one bother. i don't understand how you got to recovery menu when there isnt any? Besides have retried the steps and they work all the time. MOSt probably your return key is damaged!
rooting
i did everything and then when i connect the device via usb (after debugging n since there is no unmount) superoneclick does nothing, no driver update nothing, it just stays there, n if i click root, it hangs(super). m i doing something wrong?
it hangs! thats the point..... it takes time. Does it prompt to force install drivers yes:no?
the program will not respond for a while
Click to expand...
Click to collapse
Where does it freeze? ADB kill server> ADb start server>?
stuck on android logo after factory reset
mughalgxt said:
when do you release the three buttons? Are you sure its mid 7010 there is no recovery rom partition in mid7010 as far as i know.
Click to expand...
Click to collapse
Hi, i also have the same problem. Im stuck on the android logo after i did a factory reset. I tried the three button combo u instructed but im stuck always on the coby logo if i hold the three button.
Any help will do. Thank you
kernel
mughalgxt said:
Since there is no recovery partition than A kernel is required to repartion the partition table WHICH IS NOT EASY and since there is a way to factory reset why would one bother. i don't understand how you got to recovery menu when there isnt any? Besides have retried the steps and they work all the time. MOSt probably your return key is damaged!
Click to expand...
Click to collapse
aftry month now of trying every thing to get this kyros to life again but failed ... i think as u said a kernel is the only hope now .. hope i found some one to help in how can i do that
magus1982 said:
Hi, i also have the same problem. Im stuck on the android logo after i did a factory reset. I tried the three button combo u instructed but im stuck always on the coby logo if i hold the three button.
Any help will do. Thank you
Click to expand...
Click to collapse
You have to keep holding the three buttons the Coby LOGO display will change after 20-30 secs. ANDROID logo means the reset is done and the OS is loading will take time after reset. blank black screen means the Os cannot load hence factory reset must be done. Which logo are you stuck with?
sherif.afifi said:
aftry month now of trying every thing to get this kyros to life again but failed ... i think as u said a kernel is the only hope now .. hope i found some one to help in how can i do that
Click to expand...
Click to collapse
Your final hope is getting the back button repaired or ask someone else to do the reset procedure for you. No one is going to create a kernel for you. or for coby. try kyros forum website see if you persuade someone for more TECHNICAl support. I believe your tab's back button is damaged.
I have the Coby Kyros MID7010wc and I followed those steps, but it didn`t work - google market icon didn`t show up on apps screens. I tried to run those apks but it always says "application is not installed".
Is there something else that I can do?
did you root the device successfully?
how did you change the permission of the files in the attachment after pasting them into /system/app folder?
did you restart the device after above step?
* You need not manually install anything as it wont work just copy and paste them into system/app, change permissions and restart.
Yes it is rooted - used SuperOneClick
I didn`t understand when you said "if prompts to rewrite( do not allow!) "
if I don`t overwrite the apks it won`t install the files.
Anyway, used root explorer and copied each apk one by one in the system/app folder then changed the permission (checked every fields).
Did you reboot the system after changing permissions? Overwriting all apks in the attachment to system/app is not required rather unnecessary as google framework already exists only missing is phonesky or android market. These steps worked for me try reading other mid7xxxx threads to cross check
I redone everything and it is working as expected.
thanks!
Hey there, I have a rooted HTC e8 with TWRP-Recovery and xposed + xprivacy installed. Everything worked fine until some days ago I got a notification from xposed to restart due to an update (might be 54->58 but I can't 100% remember). So I touched the notification and got to the xposed menu where the different restart buttons are. I used software reboot (might have been an error :crying and the screen went black. Thats what always happens, but the problem is that now my phone doesn't boot back up (at least I guess so). What ever I do (hold power for a short/long time, power and -) nothing seems to work. If I connect it via usb adb devices sees a device, but adb reboot doesn't seem to do anything either.
What happened? How do I get my phone back to where it was before?
Some help would be great!
ILastSamuraiI said:
Hey there, I have a rooted HTC e8 with TWRP-Recovery and xposed + xprivacy installed. Everything worked fine until some days ago I got a notification from xposed to restart due to an update (might be 54->58 but I can't 100% remember). So I touched the notification and got to the xposed menu where the different restart buttons are. I used software reboot (might have been an error :crying and the screen went black. Thats what always happens, but the problem is that now my phone doesn't boot back up (at least I guess so). What ever I do (hold power for a short/long time, power and -) nothing seems to work. If I connect it via usb adb devices sees a device, but adb reboot doesn't seem to do anything either.
What happened? How do I get my phone back to where it was before?
Some help would be great!
Click to expand...
Click to collapse
you mean you can't boot your phone ?
if you can
press the power button
once htc screen appear click " - " button untill it boots
this puts your device in safe mode
try to remove xposed or the module you have installed lately
I think your e8 is soft bricked. First your power on your phone by pressing power button, then as soon as htc logo appears, you press power and volume down button together to go to bootloader screen. From there you can enter TWRP by selecting recovery menu. After that you can try to restore backup for system or can do a complete restore also.
Hope that helps.
A little late, but my problem was actually a battery problem. I found it somewhere online. There is a key combination (up + down + power I think it was) that you can press to recalibrate your battery. That helped.
so I wanted to update it to this "OPO-OxygenOS_3.1.4_MagiX_05FEB2K17" from 4.4.4, I put in the device a 2.7.x.x twrp recovery because I wanted to do this fast and when I flashed the oxygenos and pressed "reboot" the screen went completly off and now it dosent do nothing unless I press the power key for something like 10 seconds and it just vibrets what I can do to fix it?
Bivi13579 said:
so I wanted to update it to this "OPO-OxygenOS_3.1.4_MagiX_05FEB2K17" from 4.4.4, I put in the device a 2.7.x.x twrp recovery because I wanted to do this fast and when I flashed the oxygenos and pressed "reboot" the screen went completly off and now it dosent do nothing unless I press the power key for something like 10 seconds and it just vibrets what I can do to fix it?
Click to expand...
Click to collapse
Can you boot into fastboot?
have you try hold it a bit longer , like 10-15 secs, doest it show up a oneplus logo and can you reboot into fastboot ?
Bivi13579 said:
so I wanted to update it to this "OPO-OxygenOS_3.1.4_MagiX_05FEB2K17" from 4.4.4, I put in the device a 2.7.x.x twrp recovery because I wanted to do this fast and when I flashed the oxygenos and pressed "reboot" the screen went completly off and now it dosent do nothing unless I press the power key for something like 10 seconds and it just vibrets what I can do to fix it?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Their is method available on YouTube my one plus one was completely dead but thanks to guy on YouTube
" IT ADV " search him
Hi,
Yesterday I upgraded the phone to last aospa version (no other modification such as kernel, etc.). Today, I installed Android Auto and also ungranted permissions to some apps to not to access to my location. But then, after 1 hour, i think, the phone got into a bootloop. I can't reboot into recovery as as soon as I get into the screen to choose between "Start"/"Recovery"/"Power off"/... it reboots again. It reboots so fast I don´t have time to choose fastboot or recovery, even sometimes I managed to change to "restart bootloader" but even if I press the power button to select this option, the phone reboots. Also, If I connect the phone to the grid, the phone doesn´t stop rebooting.
So, I can´t keep the phone turn on enough to go to recovery and reset or select the fastboot to reset it from the computer.
I´ve also posted this in the aospa forum, as it could be a software bug.
Help please.
Thanks.
It looks like dead power button. There are few threads abut it:
https://forum.xda-developers.com/google-nexus-5/help/power-button-finally-died-t3664125
https://forum.xda-developers.com/google-nexus-5/help/help-power-button-broken-stuck-t2761471
and more if you search.
Hello, i do not know where to post this but i really need help solving this issue.
I was installing twrp on my Redmi note 9 (merlin) and once the set up was done my phone rebooted to twrp, but it took time (a lot of time).
And i could not resist the urge of pressing the power button to restart it, problem is miui was not starting and it was stuck at the boot logo, i figured out it was a great idea to press the power button again, but it booted up on twrp, wich worked but the screen seem to be frozen and doesn't register any tap on the screen or anything, and now each time i press the power button no matter how, it either boots on my broken twrp recovery, or boots on my absolutely destroyed os.
PS: No matter how hard i try it seem to be impossible for me to access fastboot too...
kyaaa_ said:
Hello, i do not know where to post this but i really need help solving this issue.
I was installing twrp on my Redmi note 9 (merlin) and once the set up was done my phone rebooted to twrp, but it took time (a lot of time).
And i could not resist the urge of pressing the power button to restart it, problem is miui was not starting and it was stuck at the boot logo, i figured out it was a great idea to press the power button again, but it booted up on twrp, wich worked but the screen seem to be frozen and doesn't register any tap on the screen or anything, and now each time i press the power button no matter how, it either boots on my broken twrp recovery, or boots on my absolutely destroyed os.
PS: No matter how hard i try it seem to be impossible for me to access fastboot too...
Click to expand...
Click to collapse
I was able to get this issue fixed by :
1 Installing adb
2 Opening cmd inside adb folder
3 Entering "adb devices" while the device was connected
4 Then entering "adb reboot bootloader" while the device was still connected
5 Once the device was in bootloader mode i installed miFlash and downloaded this rom : mifirm.net/download/4163
5.1 If you have an error with the drivers, create a folder named log inside of the said miFlash folder
5.2 Also make sure that the path to the rom is not too long (i heard that miFlash had problems handeling long paths)
6 Once everything was set up i just hit flash and flashed the rom onto the phone
7. You're done ! You successfully repaired your phone and saved him from the depth of hell!
If you have any problems or need precision on certain points make sure to ask me in this thread so that other people can get help too.
i had flashed k20pros dtbo img file by mistake and my phone is not even turning on and no fastboot no recovery what to do please help!!!