I'm wondering if anyone has any experience with Android phones (with HDMI out) and connecting them to a larger touchscreen (rather than a TV), and can the touchscreen then control the smartphone via the HDMI cable?
I should probably mention that my end goal here is to drop a 10" HDMI touchscreen in the car, and each time I enter the car I simply connect the phone to the touchscreen and then close the phone in the glovebox, basically using the touchscreen to remotely view and control all the phone features.
I'm afraid that HDMI does not support touch screen input. The type of touch screens you are referring to use either a USB or Serial (RS-232) connection to the computer, in addition to the video interface, to provide Touch Screen input. While I'm sure with a little digging there might be something like this to control your phone through a computer (My Mobiler allowed for this on Windows Mobile 5-6.5 phones through either USB or Bluetooth), I don't see being able to do this without a computer (or carputer) as it was, being involved.
So basically, the Triumph would need a USB host to get it done?
KryptoNyte39 said:
So basically, the Triumph would need a USB host to get it done?
Click to expand...
Click to collapse
Yeah, my guess would be that that would be the minimum requirement, as well as obviously some sort of driver support for what would essentially be "Mouse input".
I Think your best bet would be, if you could find an old netbook. One with a touch screen, you could use it as the link to you Phone. I know of 3 programs that let you output your Android phone to a computer monitor. All work on the MT and one lets you use your mouse and keyboard on the MT.
You can find the one I use here.
And if you want to try and make your on touch screen for a netbook take a look at this link. would make for a fun project.
For the other programs have a look at Ashot and [email protected]. All work with my MT.
Thanks, folks. I was kind of eyeballing this thing;
http://www.mo-co-so.com/Double-DIN-Lilliput-669GL-70NP-C-T-7-Touch-Screen-p/mcs-lil-669-dd.htm
But based on what's working right now, the Lilliput screen would still only be a display, and I'd still be controlling it from the phone somehow.
I'm not a programmer I'm afraid, but based on the current state of car stereos, I'm amazed Android hasn't progressed into this market rapidly. Let's face it, Pioneer's current $1000+ head units have just a fraction of the capabilities of my $129 Optimus V.
I considered an Android based head unit, but I think the better path is to be able to tether to the phone when you enter the car in some fasion, and then just simply use the larger in-car display to view the Android device and control it from the touchscreen. In this fashion, I don't need yet another Android device, and the in-car unit is basically without much logic. I'm afraid we might be a couple years out yet.
Yeah, such a panel like that wouldn't really work all that well for your application. The aspect ratio of the panel isn't ideal, and it appears the touchscreen works off a serial interface. Even worse, it is a resistive panel (which is leaps and bounds worse than the capacitive touch panels we're used to on our modern phones). Overall I think even if you did wire something up the experience would be fairly lack luster.
Todd42 said:
I Think your best bet would be, if you could find an old netbook. One with a touch screen, you could use it as the link to you Phone. I know of 3 programs that let you output your Android phone to a computer monitor. All work on the MT and one lets you use your mouse and keyboard on the MT.
You can find the one I use here.
And if you want to try and make your on touch screen for a netbook take a look at this link. would make for a fun project.
For the other programs have a look at Ashot and [email protected]. All work with my MT.
Click to expand...
Click to collapse
Todd, I hear what you're sayin'. I actually have an old netbook that I hopped up with an SSD. I'm wondering about stowing the netbook, rigging up some kind of start button, and then forming a MIMO monitor into the dash ...
http://www.mimomonitors.com/
(just throwing some ideas around in case it spurs another person's inspiration)
So, a coworker pointed me at a chrome book, and said, "Look, it's awesome, 10+ hours battery!" I was skeptical, I've heard horrendous things about chromebooks' usefulness, but then I found out chromebooks give you access to TTY, so in theory you can use all the nifty CLI utilities that make Linux/Unix systems so great to work with. So I went back and reexamined how I use my endless supply of various devices, from desktop to mobile phone. For the most part, I use my phone to call, stream, or browse. I use my laptop to connect to my development machine (It's just inconvenient to hold my code on my local machine for a variety of reasons, and it's not really safe practice anyways.) A short while ago, I was looking for a tablet with a data plan, and I couldn't find one - even carriers with unlimited data plans don't support tablets with unlimited data plans. Damn it! Then, as I was researching chromebooks, I realized something spectacular - despite tablets having a thicker, and therefore heaver screens, tablets are in general 1/2 the weight of chromebooks. (wtf?) So I went in search of system on a board computers, and I found MK802, which could cover all the essentials - a keyboard w/ trackpad, wifi, bluetooth, audio, video. But then I realised - I've got a heap of old android devices from the G1 all the way up to my most recent (but still outdated) Samsung I515 (whatever that's called in common-folk-tongue). And I thought to myself, "Why not use the PCB out of one of those old, working-but-outdated phones to make a DIY tablet or chromebook which will probably weigh less than COTS chromebooks, register as a cellphone with the carriers, have unlimited LTE data, and 20hr battery life?" The Droid Charge seemed like the best candidate. Although I have a couple extra I515s, the awesome thing about the Droid Charge is that it has an HDMI port. Work on the fly, come home, hook it up to a proper monitor, instant win!
Unfortunately, I haven't ever worked with drivers, firmware or the likes. I could probably MacGyver a way to hook up a keyboard with a touchpad to use the micro usb jack (I mean I'd just need to emulate hooking the DC to a dock, right?), but the real blocker for me would be the screen. I imagine there MUST be a way to swap the stock LCD and touch screen digitizer on the Droid Charge, and hook up a 10-12in one, probably from some other Samsung product, but that's completely speculation. I was hoping someone on here could help me out with hashing out how to do the screen swap up to a 10-12in screen.
Thanks,
Misha
Hi.
I currently am using a Galaxy Note 10.1 2012 as my phone/tablet and I have a few questions before considering an upgrade.
1. How is the performance of Gimp Inkscape? Is it bearable on the 12.2 (at least Gimp)?
2. What's the highest resolution supported in Autodesk Sketchbook on the 12.2 and how many layers does it have?
3. Does the Bamboo Feel stylus act close enough as the S-Pen (No re-calibration needed)? I was thinking of re-using my old tablet PC's stylus but I don't like re-calibrating everytime.
4. How long does it charge on a regular USB port with the device off?
5. With battery saving on through settings and 3rd party apps, what's the longest you've had the device without needing a charge?
6. Is it better to wait for the next pro tablet (only 10.1 2015 has been leaked)
7. Is the stylus' tip replaceable (my 2012's tip is run down after like 6 sketches)
8. Anyway to access Hamachi servers for private networking?
Thanks!
For #4. Don't do that. Use the supplied cord and charger and plug charger into wall power. USB charging from a computer is iffy. Some USB ports do not supply 2 amps. (Most)
For #7. Yes, tip is replaceable and you get several tips in the box along with an extractor tool.
fvig2001 said:
Hi.
I currently am using a Galaxy Note 10.1 2012 as my phone/tablet and I have a few questions before considering an upgrade.
1. How is the performance of Gimp Inkscape? Is it bearable on the 12.2 (at least Gimp)?
2. What's the highest resolution supported in Autodesk Sketchbook on the 12.2 and how many layers does it have?
3. Does the Bamboo Feel stylus act close enough as the S-Pen (No re-calibration needed)? I was thinking of re-using my old tablet PC's stylus but I don't like re-calibrating everytime.
4. How long does it charge on a regular USB port with the device off?
5. With battery saving on through settings and 3rd party apps, what's the longest you've had the device without needing a charge?
6. Is it better to wait for the next pro tablet (only 10.1 2015 has been leaked)
7. Is the stylus' tip replaceable (my 2012's tip is run down after like 6 sketches)
8. Anyway to access Hamachi servers for private networking?
Thanks!
Click to expand...
Click to collapse
1. It's okay for what I use it for. Ps touch is about the same for me. Also use it in artrage and infinite painter. Just don't go super crazy with layers and it's fine.
2. I'll check and edit.
3. I love the bamboo stylus feel. I bought and replaced it for my original note 10.1 then migrated it over to the 12.2 when I got it. I don't have to calibrate mine.
4. Don't charge off usb port, amps are too low will only trickle charge. Use the wall or an external battery unit.
5. With a custom rom/kernel and voltage adjustments in that I don't need 3rd party apps. Without using it I only get about 3-5% drain idle for 8 hours. Otherwise using it more commonly throughout the day probably 8 hours or more. I have an external battery pack i keep around so I never really let it run dry unless I have to.
6. no clue.
7. Stop trying to murder your screen. The bamboo stylus feel came with replaceable tips of which I've used two to three so far.
8. Hamachi has an android app.
fvig2001 said:
Hi.
I currently am using a Galaxy Note 10.1 2012 as my phone/tablet and I have a few questions before considering an upgrade.
1. How is the performance of Gimp Inkscape? Is it bearable on the 12.2 (at least Gimp)?
2. What's the highest resolution supported in Autodesk Sketchbook on the 12.2 and how many layers does it have?
3. Does the Bamboo Feel stylus act close enough as the S-Pen (No re-calibration needed)? I was thinking of re-using my old tablet PC's stylus but I don't like re-calibrating everytime.
4. How long does it charge on a regular USB port with the device off?
5. With battery saving on through settings and 3rd party apps, what's the longest you've had the device without needing a charge?
6. Is it better to wait for the next pro tablet (only 10.1 2015 has been leaked)
7. Is the stylus' tip replaceable (my 2012's tip is run down after like 6 sketches)
8. Anyway to access Hamachi servers for private networking?
Thanks!
Click to expand...
Click to collapse
1. Never used GIMP, but Photoshop manages pretty well, as does Sketchbook.
2. Max Res is 2560x2560 with 3 layers. 2560x1600 (native resolution) supports 6 layers. 1920x1080 supports 11 layers.
3. It IS an Spen. It's literally the same technology, as the Spen is Wacom's. As for calibration, my first one did require it, my second one didn't. It's a Wacom pen. Wacom pens may need to be manually adjusted to suit every individual's need. Make sure you get the Feel for Galaxy Note, as it's the 2nd version specifically for Note devices. Intuos pens won't work (sadly.)
4. Not. It has a 9500mAh battery, chanrging it on a 5V 2.1A charger van 0 to 100 takes about 6-8 hours, a USB supplies far too little.
5. In Deep sleep this thing lasts ages, currently at 4d 23h 44m with -6% drain in total (According to BBS).In use it does about 12 hours of films.
Mind you, I don't use any Battery Saving setting, I just have GPS, WiFi, Sync etc off, non-root bloatware removed, replaced Touchwiz with Apex and Greenify on most apps. If you root and delete more of the bloatware you might get even longer out of it.
6. The announcement, if it happens, will happen at the CES 2015. 6-9 January 2015. So by the end of next week, we'll know. I doubt it as there have been no leaks (one for a 13" device, but I don't know if that'll have an Spen)
7. All Wacom pen tips are replaceable, including the Spen. They're supposed to come with a small bag of 3-5 tips and a silver pincher.
8. I have no idea.
Keep in mind that this is on the more powerful Snapdragon+Adreno LTE variant. The WiFi variant runs a less powerful Exynos with Mali CPU. That will affect performance in graphic apps.
bloop ignore
After a lot of reviews and reading I just ordered a 9" Idoing with CanBus for my 2018 WRX with Harman Kardon. A lot of positive reviews from WRX owners, but not seeing a lot of love(or hate) for the Idoing hear on XDA. It's nearly identical to the Joying, but Joying will not support the HK system in my car.
The system is an android 10, UIS 7862 4+64. https://www.aliexpress.com/item/32955093508.html
I'm curious what custom options I have in terms of UI, ROMs, Root,, apps?
I'm guessing from what I read(or lack there of) ROMs are a no go, but what about root and other customization options?
Sorry long time rooter and custom ROM user for android phones and tablets, but total noob to android head units.
I have a Kenwood with wireless android auto in my old car and was going to move it to this one, but absolutely hate Android Auto almost as much as I hate mirrorlink in the stock HU in my WRX(shame on you subaru). Also the kit to install it from crutchfield cost nearly as much as the android unit and canbus shipped from china, so figured i'd take a chance.
If it doesn't work out I'll go with the kenwood, but really hopeful this will be a winner. I spent a lot of time on chat with them and they are extremely responsive to questions(really like live chat) where a question to Joying took 3 days to get a response.
I know there is little chance the 4G module will work in the US(IDoing says it works with tmobile) so expecting to use wifi tether with my phone with native apps and pretend android auto doesn't exist. Other option is put a spare phone with sim permanently connected to USB, but unsure if USB tether will work.
I will keep reading, but any thoughts or pointers are welcome. Just don't tell me to replace my HK system, I know not everyone likes it, but I love it ;-)
FAIR WARNING!!!! After a year with no issue, My IDoing fried itself today!! I was driving and it shut down and for about 1 minute I could smell burnt electronics. This was a plug n play install so no cutting, no splicing, no soldering. I am in the process of seeing what IDoing will do for me, but I expect the answer is nothing since it is now over a year old.
Update: Well at least IDoing is talking to me. I pulled the unit out today and put the Stock stereo back in(UGGGH). At least nothing else got fried.
Update 2: So they are saying that they want me to pull the unit off the mounting trim and mail it to them and they will send me a knew one. I'm assuming this is going to cost me 100 bucks in shipping and need to wait a month or more, but it's better response than I expect.
Update 3: They "say" that once I give them tracking number for the unit, they will ship new unit and all i have to pay for is return shipping(30 dollars)
Final Update: Well it cost me a lot more than the USPS web site inferred (85 dollars), but they shipped a replacement the same day I gave them the tracking for the return. New unit showed up in just over a week, Unit looks new installed in less than an hour and all works great, software looks to be nearly identical except the AA software that it came with support wireless out of the box, so small bons. Unfortunate the original unit fried itself after a year, but considering it was out of warranty I have to commend Idoing on how they handled this, now I just need to remember all the tweaks I had installed ;-)
Roms, you have 2 options both are "Lite" versions meaning you have to buy the other features.
No real need for twrp.
Best bet make sure it works with Android auto wireless
Also pay close attention to the button layouts for the different types of screens.
Most development will be in the "Android auto" fourm
Also ask the seller to provided the zlink activation codes
Hmm, I'm curious why I would use AA at all with this as opposed to running apps on the unit with wifi tether? I've used AA Mirror in the past with my kenwood, but would prefer to avoid that path if possible.
It should work with AA, but not wireless as far as I know.
So my unit arrived today:
https://www.aliexpress.com/item/32955093508.html
Got it to the point of plugging it in to test in the car.
Adding Heating controls vents was a Piece of Cake and this thing looks amazing
Tested:
Screen: Fast and gorgeous responsive, seems very good in bright sunlight
capacitive buttons:, work well , Reset and reprogrammed and much better. Also Illumination is working with custom colors.
Well Documented low volume buzz... Yep it's there, goes away if you mute the radio. Will look for setting to reduce perhaps as well as talk to IDoing
Harman Kardon Canbus, Works plug and play. One issue that may be related is the Fade controls don't really work to fade to rear as they mute the rear, while balance controls work fine... Talking to IDoing now and they just confirmed that any factory amp radio has this issue.
Wifi 5ghz tether, works flawlessly, get 50mbit off my cell. Not the fastest but more than good enough
Play store/google account setup: works flawlessly. Have installed several apps already
Waze/GPS: works flawlessly
USB: 3 dongles, all work for USB Drives, haven't tested for phone connection
Flac: Works off all 3 usb(one main reason I went with this unit)
4g: Working well with t-mobile, not working with verizon. Verizon shows as full bars, bars when I went more urban, but there are no APN settings and I cant get data to work.
Bluetooth audio: works ok, sound doesn't seem fantastic, but i will probably never use.
Android Auto: Wired works great, can't get wireless to work even though my phone says the head unit supports it. Wired it's very fast and responsive and looks great.
Carplay: works wired and woreless, didn't test much as I don't use apple except for app testing.
Fubo/Video: Works very well screen is gorgeous
Developer options: IDoing gave me codes
Launcher: Pretty flexible with different options.
Got USB Debugging, ADB to work today. In developer setting there is 3 "..." at the top, in there is USB mode, top is host mode, bottom is device mode(ADB).
Once I got ADB going I got SystemUITuner granted permissions to control immersive mode for Waze and the like.
Custom Launcher: Got custom launchers working with a trick to use the setting in Nova to set default launcher. Now Rocking Car Web Guru launcher. Also Like Car Launcher Free Version.
Split screen : woks well and is even remembered as last view on soft boot.
Geekbench: 500+, 1300+ very pleased.
android auto with Head unit reloaded: tested with dev server method. Works well with wireless, but UI layout is pretty bad.
Console USB Adapter: Bought from amazon, works perfectly. Now 4 functioning USB
USB access for File Manager : doesn't work yet
Music Apps: do have access to USB
Automation: Used Macrodroid to start Android auto whenever the phone usb is plugged in, or to start spotifiy if no usb and wifi connects. Will do some more of these.
Overall:
Bummed about the rear speaker control, will have to see how much it affects my listening, found subwoofer control an tweaked EQ, sound is quite nice, still wish fade worked. Ok next note to others, make sure you calibrate your EQ with your back seats up. I forgot I had put them down to get my bike in and that was half my disappointment with the sound. Yes I still wish I had fade, but this thing sounds Really nice once dialed in.
The buzz is "irritating" that it exists, but unlikely a real issue for me.. Totally inaudible when car is running.
Otherwise this thing is pretty sweet so far.
Hi gottahavit,
I was just looking at this model on aliexpress and this post comes in just in time as you would say. I have a 2017 STI with no HK
What is your experience with the Mic for calls? does it retain the factory mic or do we have to plug in a new one?
You mention codes for Dev, can you share these?
The console USB Adapter - Which one did you use? do you have a link?
Have you tested ODB2 with apps like Torque?
The External GPS antenna is it required for it to work?
What about the 4G antennas?
thanks so much!
seryser said:
Hi gottahavit,
I was just looking at this model on aliexpress and this post comes in just in time as you would say. I have a 2017 STI with no HK
What is your experience with the Mic for calls? does it retain the factory mic or do we have to plug in a new one?
You mention codes for Dev, can you share these?
The console USB Adapter - Which one did you use? do you have a link?
Have you tested ODB2 with apps like Torque?
The External GPS antenna is it required for it to work?
What about the 4G antennas?
thanks so much!
Click to expand...
Click to collapse
So first, IDoing have been fantastic in helping with the right purchase and the support, but that said this suffers from a lot of issues the other MFG units do. If you had HK I'd def recommend the IDoing as it's plug and play works great.
However if you don't have the HK I might suggest you get a version with optical or coax out. I think Joying and Daisata sell the same unit but with one or the other cabling.
I don't really make calls, but have tested a couple and was told the mic is ok. No you can't keep the stock mic or GPS.
Codes:3368 for factory, 7171 for Launchers
USB: https://www.amazon.com/gp/product/B01DJ4KVQ6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 works perfectly.
No ODB2 here, should be the same as the Joying in another thread.
You need the GPS if you want waze or maps on the unit vs AA or Carplay. I just mounted it on the top of the unit and it works great.
4G works fine with Tmobile, I tested with a Mint mobile trial, but cannot get proper APNs in for Verizon SIm to work(still on my hit list)
I recommend the coax as so many of these unit suffer from some form of ground loop interference which is just annoying even if it doesn't really affect the sound. I had no choice given the HK system
Even with the HK this thing cranks our a lot more power than the POS subaru unit..
These things are great and all the work of install is getting the old unit out. It's not perfect but leaps and bounds above stock.
The other reason to go with Joying is you'll get more support here than you will with the IDoing(very specialized to subaru).
If you do buy from IDoing just chat with them first they will help you pick the proper unit and any canbus for your car.
I would definitely go with the UIS7862 version, as this thing is fast!
Thanks for all the information! Really clarifies what i need to get. Ill look at the joying unit and see what the differences are... There was also the Teyes CC3, but man is it more expensive but looks absolutely awesome
seryser said:
Thanks for all the information! Really clarifies what i need to get. Ill look at the joying unit and see what the differences are... There was also the Teyes CC3, but man is it more expensive but looks absolutely awesome
Click to expand...
Click to collapse
Looking I see the unit 6+128 would be cool, but be careful, they all say forrester and have foreester button config for the top lcd and 4-wasy buttons. Maybe they have insert for WRX like IDoing. Also I don't see and coax or optical out, but just did quick search. Keep in mind that a lot of that marketing material is just that. I love my unit, but you can't believe everything you read. Also that's cheaper the IDoing or Joying. I think the key is make sure it has the key connections you want(optical, coax, HK my case) and that it fits your car.
Idoing is reseller of various types of kanged android head units.
Would be good to know factory/manufacturer or unit - sounds like it might be an FYT? You will then be able to know what rom options and mods are available from the forums.
Manufacturer can generally be identified from MCU version, what is the full MCU version listed?
marchnz said:
Idoing is reseller of various types of kanged android head units.
Would be good to know factory/manufacturer or unit - sounds like it might be an FYT? You will then be able to know what rom options and mods are available from the forums.
Manufacturer can generally be identified from MCU version, what is the full MCU version listed?
Click to expand...
Click to collapse
IDoing is FYT, they are the only ones with the canbus for the HK system in my car, but that's fine for seryser as he/she has base stereo., but with no HK I recommend getting a unit with optical or coax.
Just a note on the WRX install, you will be tempted(as I was) to not drop the drivers air bag and try to get to the 10mm bolt on that side. DROP THE STUPID AIRBAG!!!!
It's really near impossible to get enough purchase on the bolt unless you do. I wasted an hour trying to not drop the air bag and gave up and had it done in 5 min.
When you put the new unit it, they are TIGHT, snap the clips at the bottom, bend in the clips at the top, then push REAL hard in the top of the screen to sanp the middle clips. They will snap in and what a beautiful fit this unit has. Make sure you run all your cables where you want them before you snap it in! You get 3 usb, I removed the cigarettes lighter under the unit and cut it and plugged it to have one USB in snapped in, ran the other two into the glove box along with the stock usb plug(was amazed it was long enough), then you just plug it into the adapter and one USB plug right in the glove box. Now I have one under the unit, one in the glove box, and 2 in the center console.
I just found the USB Mode toggle on the UIS7862 IDoing. It's the "..." menu at the root of developer setting. Two items in Chinese, top one is host mode, bottom is device mode. Got USB Debugging working fine even with usb-c cable from my laptop.
A picture's worth a thousand words
ludditefornow said:
A picture's worth a thousand words
Click to expand...
Click to collapse
I can post pics later, but if you can get into developer settings. Immediately in the top right there is a menu button(...) click that and there is one option "USB Configuration", click that you get a popup with 2 options in it in chinese. The first is USB Host mode and the second is Device mode which will let you do USB Debugging from a laptop.
again this is on my IDoing, YMMV
gottahavit said:
So my unit arrived today:
https://www.aliexpress.com/item/32955093508.html
Got it to the point of plugging it in to test in the car.
Adding Heating controls vents was a Piece of Cake and this thing looks amazing
Tested:
Screen: Fast and gorgeous responsive, seems very good in bright sunlight
capacitive buttons:, work well , Reset and reprogrammed and much better. Also Illumination is working with custom colors.
Well Documented low volume buzz... Yep it's there, goes away if you mute the radio. Will look for setting to reduce perhaps as well as talk to IDoing
Harman Kardon Canbus, Works plug and play. One issue that may be related is the Fade controls don't really work to fade to rear as they mute the rear, while balance controls work fine... Talking to IDoing now and they just confirmed that any factory amp radio has this issue.
Wifi 5ghz tether, works flawlessly, get 50mbit off my cell. Not the fastest but more than good enough
Play store/google account setup: works flawlessly. Have installed several apps already
Waze/GPS: works flawlessly
USB: 3 dongles, all work for USB Drives, haven't tested for phone connection
Flac: Works off all 3 usb(one main reason I went with this unit)
4g: Working well with t-mobile, not working with verizon. Verizon shows as full bars, bars when I went more urban, but there are no APN settings and I cant get data to work.
Bluetooth audio: works ok, sound doesn't seem fantastic, but i will probably never use.
Android Auto: Wired works great, can't get wireless to work even though my phone says the head unit supports it. Wired it's very fast and responsive and looks great.
Carplay: works wired and woreless, didn't test much as I don't use apple except for app testing.
Fubo/Video: Works very well screen is gorgeous
Developer options: IDoing gave me codes
Launcher: Pretty flexible with different options.
Got USB Debugging, ADB to work today. In developer setting there is 3 "..." at the top, in there is USB mode, top is host mode, bottom is device mode(ADB).
Once I got ADB going I got SystemUITuner granted permissions to control immersive mode for Waze and the like.
Custom Launcher: Got custom launchers working with a trick to use the setting in Nova to set default launcher. Now Rocking Car Web Guru launcher. Also Like Car Launcher Free Version.
Split screen : woks well and is even remembered as last view on soft boot.
Geekbench: 500+, 1300+ very pleased.
android auto with Head unit reloaded: tested with dev server method. Works well with wireless, but UI layout is pretty bad.
Console USB Adapter: Bought from amazon, works perfectly. Now 4 functioning USB
USB access for File Manager : doesn't work yet
Music Apps: do have access to USB
Automation: Used Macrodroid to start Android auto whenever the phone usb is plugged in, or to start spotifiy if no usb and wifi connects. Will do some more of these.
Overall:
Bummed about the rear speaker control, will have to see how much it affects my listening, found subwoofer control an tweaked EQ, sound is quite nice, still wish fade worked. Ok next note to others, make sure you calibrate your EQ with your back seats up. I forgot I had put them down to get my bike in and that was half my disappointment with the sound. Yes I still wish I had fade, but this thing sounds Really nice once dialed in.
The buzz is "irritating" that it exists, but unlikely a real issue for me.. Totally inaudible when car is running.
Otherwise this thing is pretty sweet so far.
Click to expand...
Click to collapse
What a good review!!!
Really "irritating" the permanent buzz. Only dissapear with volume to zero every time I turn on the unit. If somebody find a fix i will be more than happy
JAR99 said:
What a good review!!!
Really "irritating" the permanent buzz. Only dissapear with volume to zero every time I turn on the unit. If somebody find a fix i will be more than happy
Click to expand...
Click to collapse
Yes I agree, at tis point it's the only real gripe I have with the unit. The thing is amazing compared to the crap that Subaru put in.
The issue seems to be pretty common on these chinese units, which is why if I didn't have the HK setup I would have bought one with Optical or Coax. Honestly you can't hear it when listening to music, but... If I ever pull the unit out again I will try to ground the board to see what that does.
IDoing has "tried" to be helpful, and they are extremely responsive on aliexpress.
I'm glad you found my review useful.
So I managed to get APN setting for verizon to stick, and I ca see the verizon network if I use a replacement mobile network settings like from CWG, however even though it will connect and I have the APN it sitll won't get any mobile data on the verizon network. I'm beginning to think they have it hardcoded in the System to only work with t-mobile. Either that or Verizon is rejecting data requests from the device even tough it lets it connect. I've tried with both true Verizon Sim and an Xfinity Mobile Sim(Both verizon, but different APNs).
gottahavit said:
Yes I agree, at tis point it's the only real gripe I have with the unit. The thing is amazing compared to the crap that Subaru put in.
The issue seems to be pretty common on these chinese units, which is why if I didn't have the HK setup I would have bought one with Optical or Coax. Honestly you can't hear it when listening to music, but... If I ever pull the unit out again I will try to ground the board to see what that does.
IDoing has "tried" to be helpful, and they are extremely responsive on aliexpress.
I'm glad you found my review useful.
Click to expand...
Click to collapse
Do these buzz even if you don't have the hk?
speeddemon1891 said:
Do these buzz even if you don't have the hk?
Click to expand...
Click to collapse
I believe they do, only way around it without playing with internals is to get one with the coax or optical out and use that, then it's digital to your amp.
gottahavit said:
I believe they do, only way around it without playing with internals is to get one with the coax or optical out and use that, then it's digital to your amp.
Click to expand...
Click to collapse
Think it might be possible to add some kind of pass-through filter/adapter to the RCA leads which could help reduce or eliminate the buzz?