Related
I'm stuck in a bootloop on Pixel (sailfish). I've rooted with SuperSU and installed TWRP previously. I've never had an issue applying the new updates until today.
Here's the steps I followed:
I downloaded the 7.1.2 (N2G47O, May 2017) update from the google site and verified the SHA 256 hash
I removed the -w from the "fastboot -w update" in flash-all. Then ran flash-all.bat. It completed successfully. The phone rebooted.
Next I powered down the phone and booted to fastboot.
I then tried to install TWRP by running "fastboot boot twrp-3.0.2-RC1-fastboot.sailfish.img"
It installed fine and booted to TWRP.
I opened TWRP and tried to install TWRP. It ran fine. Rebooted and here's where I went into the problem
The phone boots up and gives me the message about "Your Device software can't be checked for corruption. Please lock the bootloader". I've seen this before, so no issues.
Then the Google screen shows up with a black line through it.
Then it comes back to the previous message about the unlocked boot loader.
If I tried to hold POWER down, I get a message "[RAMDUMP] Writing to EXt 4 file" and back to the message about the unlocked boot loader.
How do I fix this ?
UPDATE: After much trying, i finally caught it when it was powered off and managed to get to boot to fastboot where I reflashed the most recent update. But.. is this still the best way to install TWRP ? Or should I do something else?
The problem is the bootloader in the N2G47O. A temporary fix is to download the N2G47E image and extract the `bootloader-sailfish-8996-012001-1702151126.img` file and then boot your phone into fastboot and run `fastboot flash bootloader bootloader-sailfish-8996-012001-1702151126.img`. Then you can boot into TWRP and install whatever you need
Abolfazl said:
The problem is the bootloader in the N2G47O.
Click to expand...
Click to collapse
Thank you very much! I've followed the temp fix and now have both TWRP and SuperSU installed.
I appreciate the quick response and help
Wow this just happened to me too. Thanks for the fish. I guess a better upgrade path is to not skip the April update ( I was coming from March to May)
Also follow the hardware process of booting to fastboot if this is happening, no need to wait for an oppurtunity. Just press Power + Vol - + etc and release to boot to fastboot.
.
THANK YOU!
Abolfazl said:
The problem is the bootloader in the N2G47O. A temporary fix is to download the N2G47E image and extract the `bootloader-sailfish-8996-012001-1702151126.img` file and then boot your phone into fastboot and run `fastboot flash bootloader bootloader-sailfish-8996-012001-1702151126.img`. Then you can boot into TWRP and install whatever you need
Click to expand...
Click to collapse
Saved my life here! I thought I was going to have to deal with Ads until the next time they updated TWRP! This worked beautifully!
So I had an unlocked H8 with LOS. As I wanted to install EMUI, I put the proper restore Update.app into the dload folder and started Huawei's recovery. Everything went well, I formated data and wanted to install the EMUI 4.1 ROM using the same method.
Unfortunately my H8 is bootlooping and there is now way into erecovery nor any other recovery. It simply reboots on every single known vol up or down key pressing combination. The only thing I can go to is fastboot mode when holding down vol down and plugging in usb wire. But, it says frd locked and I can't install nor boot twrp. It's simply gone and reboots all the time.
Any hints? I can't even turn it off.
I wanted to give away that phone that's the reason. Last time I did it this way, I could flash the EMUI 4.1 since it's signed. But not this time.
Interesting part is, that although fastboot says frd locked, I still get the "phone unlocked" warning on every reboot. dload method isn't working, as it simply keeps rebooting.
It's my hardest brick so far I ever encountered
the same thing happened to me.....on my phone lock/unlocked frp and bootloader were tweaked for some reason(I mean that what was written wasn't the reality) so how did I fix it? I kept on to flash rollback package many times and I tried to unlock/relock bootloader again, at the end the phone let me to flash the firmware, I didn't know how but the phone allowed me to flash things throw recovery(using dload method). At the begin I only could access to erecovery and fastboot. I suppose that I broke system and data partition and while I looked/unlocked the bootloader, the wipe fixed the partition table. Sorry I'm tired and I know that my English sucks, I hope you understand what I have written.
How did you enter erecovery as this isn't working for me.... What did you flash over fastboot?
Have you tried flashing the firmware separately using adb on computer?
For this you just need to extract the Update.app using the firmware extractor for huawei. Then flash them individually using adb commands in cmd.
I can't access any state that would allow to do adb.
faeArai said:
How did you enter erecovery as this isn't working for me.... What did you flash over fastboot?
Click to expand...
Click to collapse
sorry. I'll try to explain better, however on Huawei/honor devices there are not one but two recoveries, so one is the normal recovery flashed in recovery partition, the second one is the Huawei recovery that is flashed in recovery2 partition, so if you didn't touch recovery2 partition, your erecovery is still there, now, if you press VOL+ VOL- and POWER it will reboot to recovery2 and it starts to flash something from dload in your sd card, so in my opinion you should do this things, first try this method to flash rollback package(this is the transition package from 7 to 6 and you will find it on honor site) if this is still not working try locking and unlocking again your bootloader(I hope this fix partitions of your device) then try to enter recovery and do a wipe and then boot your device, if this doesn't work flash rollback package(now it would work) and then flash an emui 4 full firmware image, always using dload method. trust me... I did the same... and it worked for me. let me know if it works for you :good:
faeArai said:
So I had an unlocked H8 with LOS. As I wanted to install EMUI, I put the proper restore Update.app into the dload folder and started Huawei's recovery. Everything went well, I formated data and wanted to install the EMUI 4.1 ROM using the same method.
Unfortunately my H8 is bootlooping and there is now way into erecovery nor any other recovery. It simply reboots on every single known vol up or down key pressing combination. The only thing I can go to is fastboot mode when holding down vol down and plugging in usb wire. But, it says frd locked and I can't install nor boot twrp. It's simply gone and reboots all the time.
Any hints? I can't even turn it off.
Click to expand...
Click to collapse
I ran into this issue not that long ago. What you have to do is relock your bootloader using ADB. The ADB commands and instructions can be found in this thread.
Just a FYI, do not use the links to the software listed in that thread as it is a little outdated. The method still works but the software will probably not work. Just be sure to get the most recent/appropriate version of SuperSU and TWRP via their official threads (This is if you want to re-root). There are Honor 8 specific TWRP files if I remember correctly, so be sure to check around the Honor 8 forums for the correct files.
A quick summary of what I did:
1) Power your phone off and then boot into fastboot by holding Vol down + Power; as soon as it boots up, plug your phone into your combuter via your usb cord.
2) With ADB running, type:
Code:
fastboot oem relock [COLOR="LightBlue"]################[/COLOR]
NOTE: The '#' should be replaced with your unique unlock code that you obtained to unlock your bootloader.
3) Wait for it to format and reset your phone and go through the setup. BE SURE TO BYPASS all google registration; skip everything you can to get into the phone itself. If you do register, it will reactivate FRP and you'll have to start over again.
4) Turn on USB Debugging and every other setting that enables developer administrative navigation and control just to be safe. USB Debugging being the most important one, though.
5) Restart your phone and boot into fastboot again using Vol down + Power.
6) Unlock your phone again with:
Code:
fastboot oem unlock [COLOR="LightBlue"]################[/COLOR]
7) Once the command is entered, it'll reset your phone once more and - as stated before - bypass/skip all google (FRP) registration.
8) Enable developer options and USB debugging again and make sure that OEM Unlocked is checked and grayed out.
9) Reboot into fastboot mode to confirm that FRP is disabled and you should be able to install TWRP now via ADB.
@Numerics thanks. The thing is, that I can't boot anything. I can't even go into eRecovery. Nor can I flash a stock EMUI 4.1. It just boot loops all the time and I can only access fastboot.
If you can flash twrp..........Install los or other Rom ..................Go back to stock.......you must flash b360 ober adb...... because los is 7.1...............if you on b360 you can usw the rollback for emui 4.1........,..............sry for bad english
I can easily go to fastboot. But I can't flash anything. I extracted the img from the update.app but can't flash. It simply says that it's not permitted.
faeArai said:
I can easily go to fastboot. But I can't flash anything. I extracted the img from the update.app but can't flash. It simply says that it's not permitted.
Click to expand...
Click to collapse
With my method, you don't need to flash anything. Just relock your bootloader via adb in fastboot mode and let it reset. Unless I'm not understanding your issue entirely.
@Numerics as I said, in won't boot anything as it is constantly boot looping. There is no way to access any kind of recovery nor erecovery. There is no boot into Android. The only thing accessible right now is fast boot (which is not ADB). But even in fast boot I can't do anything als operations are not permitted.
after boot looping and starting fast boot mode, I can see a "Android reboot reason" section saying:
AP_S_PANIC
data is invalid
There is still a lineageos installed on system as firmware but as I tried to get rid of it by going back to stock EMUI, I guess Huawei's rollback did something wrong and killed recovery (although I did it in the past successfully).
I tried to run HiSuite to recover my phone, but it just says, that my phone is not supported.
Speaking of this, Huawei messed up with that whole fastboot locking bull****.
faeArai said:
@Numerics as I said, in won't boot anything as it is constantly boot looping. There is no way to access any kind of recovery nor erecovery. There is no boot into Android. The only thing accessible right now is fast boot (which is not ADB). But even in fast boot I can't do anything als operations are not permitted.
after boot looping and starting fast boot mode, I can see a "Android reboot reason" section saying:
AP_S_PANIC
data is invalid
There is still a lineageos installed on system as firmware but as I tried to get rid of it by going back to stock EMUI, I guess Huawei's rollback did something wrong and killed recovery (although I did it in the past successfully).
I tried to run HiSuite to recover my phone, but it just says, that my phone is not supported.
Speaking of this, Huawei messed up with that whole fastboot locking bull****.
Click to expand...
Click to collapse
No, I know ADB isn't Fastboot. What I'm trying to say is that you should be able to still run ADB via CMD on Windows when you're in fastboot mode to relock your bootloader with the directions I gave in my previous post. It'll force-restore your phone to a non-bricked/vanilla state. At least that is how I fixed mine.
Like... You can't even try using the 'fastboot oem relock ################' function via the ADB console while in fastboot?
yes boy trust us, you haven't a working OS so it is a normal thing that your phone reboot, you cannot access to recovery because some partitions are corrupted (data partition) , so these are the steps that could help you:
1) using fastboot, relock your boot loader
2)using fastboot, unlock your boot loader (partition table would be ok now, and you would be able to use load method to flash things trow stock recovery)
4)put inside your sd card \dload\update.app(use rollback package)
3) press all the buttons while your device is rebooting(do this before the blue screen logo appear), your phone is now looking for something inside your sd card
5) if the next step doesn't work do a factory reset from recovery that now would be working
6) put inside your sd card a full android 6 (emus 4) update.app and pressing all buttons it will install the firmware
7) your device now is locked and back to stock, maybe without cust partition or maybe in test mode but it is certainly alive
8) do a factory reset and reinstall the firmware
9) your phone is now ok
You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.
faeArai said:
You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.
Click to expand...
Click to collapse
Which model do u own?
Sent from my Honor 8 using XDA Labs
The European one.
faeArai said:
You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.
Click to expand...
Click to collapse
This is not the truth.....locking bootloader will erase all your data and fix partitions....and with fixed partition you can access to recovery ......trust me the only thing that you can do is to lock your bootloader......you can't flash anything from fastboot and boot recovery or system now...... lock your bootloader and then unlock it again, try using "fastboot OEM lock *****" or "fastboot OEM relock *******" (try cmd runned as admin, people say that this makes the difference) then unlock your device again and .....magic your recovery will boot......the same thing happened to me and I fixed my phone using this trick, however, even if you had frp unlocked it would say you that isn't possible to write anything because you broke some partition, and that's the reason why you can't boot recovery, wait one second and think: why doesn't my recovery boot?
It has nothing to do with trust. I did it and device is still a full stone brick. Nothing changed by locking the bootloader besides that now I can't unlock the bootloader anymore.
I was rooted with TWRP but I want to sell this phone so I was rolling back to stock. I was able update successfully both times (back to B300 and then initial B310 firmware) and after the 2nd update it did an automatic data reset just like the instructions said it would. Now my phone is bootlooped stuck on the honor screen and I need some help getting it back. I read that rolling back will relock your bootloader so I assumed (incorrectly obviously) that it would just return everything to stock.
I now have stock recovery and erecovery works as well. Tomorrow when I get into work I'll be able to get it into fastboot then what do I need to flash to get this thing working again? Thanks in advance
just flash the respective firmware via dload and it will lock both bootlaoder and FRP and should be good to go with full stock.
let me know in case need help, will try as much as can.
Which firmware? I already used the dload method in my attempt to rollback to emui 4.1 since I read that would relock my boot loader. Both parts of the 2 part rollback were successful according to the updater . After the first update my phone boot and I was able to check in settings that I was rolled back to B300 firmware. I then did the dload with the B110 firmware and upon completing sucessfully it automatically reset my phone and went straight to bootloop.
In the following post the person says unroot and relock boot loader first which I did not, does that have anything to do with it?
https://forum.xda-developers.com/honor-6x/help/how-to-rollback-package-huawei-gr5-2017-t3574399
Dazed No More said:
Which firmware? I already used the dload method in my attempt to rollback to emui 4.1 since I read that would relock my boot loader. Both parts of the 2 part rollback were successful according to the updater . After the first update my phone boot and I was able to check in settings that I was rolled back to B300 firmware. I then did the dload with the B110 firmware and upon completing sucessfully it automatically reset my phone and went straight to bootloop.
In the following post the person says unroot and relock boot loader first which I did not, does that have anything to do with it?
https://forum.xda-developers.com/honor-6x/help/how-to-rollback-package-huawei-gr5-2017-t3574399
Click to expand...
Click to collapse
Nope. Dload woll lock the bootloader. I tried today but seems some issue and we may need to flash the boot.img before proceeding. Tried 3-4 times today but no luck. Will try later now as this is primary phone with all official apps installed
shashank1320 said:
Nope. Dload woll lock the bootloader. I tried today but seems some issue and we may need to flash the boot.img before proceeding. Tried 3-4 times today but no luck. Will try later now as this is primary phone with all official apps installed
Click to expand...
Click to collapse
Are you saying I need to flash the boot image? I thought boot, recovery and all the necessary images were contained in the update.app and are flashed on a successful dload update. I do know my boot loader is relocked
Like a fool I forgot my SD card on the bedside table this morning so I won't be able to dload anything but I will be able to ABD/fastboot once I get to work. I.was thinking of extracting the boot.img from the update.app and flashing it via adb
Dazed No More said:
Are you saying I need to flash the boot image? I thought boot, recovery and all the necessary images were contained in the update.app and are flashed on a successful dload update. I do know my boot loader is relocked
Like a fool I forgot my SD card on the bedside table this morning so I won't be able to dload anything but I will be able to ABD/fastboot once I get to work. I.was thinking of extracting the boot.img from the update.app and flashing it via adb
Click to expand...
Click to collapse
I am not saying this exactly but yeah, after unroot via zip, i got the message on recovery that i may need to flash the boot.img to completely unroot it and then proceed but I never did that.
I used dload main zip content and was success but device went to bootloop. Then later I tried the 2nd file and same. Earlier I used to flash both fine but only 2nd would boot me fine and main zip will lead to bootloop.
yeah, update.app contains all, not sure why its not working and flashing the boot.img directly.
In fastboot phone is locked FRP unlocked. I cannot flash boot.img, says
FAILED (remote: command not allowed)
Dazed No More said:
In fastboot phone is locked FRP unlocked. I cannot flash boot.img, says
FAILED (remote: command not allowed)
Click to expand...
Click to collapse
Tried unlocking the BL? Once that is done, you may proceed further
Unlocked BL and flashed boot.img from B110 update.app and still no boot
edit: last night booting into recovery (vol + and power) gave me three options: Reboot/Wipe Date Reset/Wipe Cache. Since unlocking the bootloader and flashing the boot.img today the same button combo launches eRecovery with Wifi update option but it fails getting package info.
Is it normal for factory reset after lock/relock to go from 15% to 100% and say succesful?
I used the team mt huawei multi tool app and after using the unbrick option it flashed boot, cust, recovery, system and userdata.img and my phone now boots! Shashank thank you for taking the time to respond.
Pixel 2 XL is soft bricked at the moment and I can't for the life of me think of what I need to do to recover it. I unlocked my bootloader and rooted when I switched to Pie, (I saw people we're already able to use Android pay on a rooted device again and I just couldn't help myself.) I installed twrp accidentally tried to flash TWRP not realizing I needed to temporary boot it and pushing the zip over erasing the recovery I proceeded to just fastboot it and carry on with the normal procedure with my phone. after getting Magisk installed I had my phone all set up until the next time I turned it on and back off again It said I forgot my PIN which I know I didn't I think this was because a glitch with smartlock I just setup so I go to my recovery and wipe the Dalvik cache, cache, Internal storage, and data and low and behold my phone bootloops never making past the final stage before it gets to the lockscreen. I go to Fastboot screen on my phone and my mac can't list my phone as a device in adb and now I am having issues getting back into recovery which I think might be because I am on the stock kernel my Fastboot screen on my phone says Product Name - Taimen, Variant - MSM USF:SAMSUNG(64gig) DDR:SAMSUNG, Bootloader version - TM220j, Baseband version - g899800253-1805232234, my Serial number, Serure boot - Yes, Device status - Unlocked, Vart console - Disabled, HW version - rev_10
I can't get it to stop bootlooping and just turn off.
bump
xda Zed said:
bump
Click to expand...
Click to collapse
Try flashing the stock boot.img with Fastboot. That might get you out of it. Since you did all the wiping I can't say for sure. However, when you were at the point where it wouldn't take your password, that's all that needed to be done. I ran into the same thing. It's a Magisk bug. Magisk gets flashed to the boot partition so flashing the factory boot.img will fix it. TWRP also gets flashed to the boot partition so if you flashed it too, flashing a factory boot image will get rid of that too. ADB won't see the phone while it's in fastboot mode. You need to use "fastboot devices". You can download a factory image if you don't have one and extract the boot.img from it. Put it in the folder your fastboot is in, and then open a command prompt (terminal? I'm not a MAC person) from that folder and type "fastboot flash boot boot.img" (without the quotes). Make sure you use download the factory image that's the same as what you currently have installed on the phone.
robocuff said:
Try flashing the stock boot.img with Fastboot. That might get you out of it. Since you did all the wiping I can't say for sure. However, when you were at the point where it wouldn't take your password, that's all that needed to be done. I ran into the same thing. It's a Magisk bug. Magisk gets flashed to the boot partition so flashing the factory boot.img will fix it. TWRP also gets flashed to the boot partition so if you flashed it too, flashing a factory boot image will get rid of that too. ADB won't see the phone while it's in fastboot mode. You need to use "fastboot devices". You can download a factory image if you don't have one and extract the boot.img from it. Put it in the folder your fastboot is in, and then open a command prompt (terminal? I'm not a MAC person) from that folder and type "fastboot flash boot boot.img" (without the quotes). Make sure you use download the factory image that's the same as what you currently have installed on the phone.
Click to expand...
Click to collapse
I stopped my endless bootloop! Now it says my device is corrupt and cannot be trusted and may not work properly when I tried to start it I couldn't get past the google screen. When I plug it into charge now it doesn't automatically going into a bootloop that can only be stoped by going into the fastboot mode or running out of battery, but the the charging symbol on the screen won't go away. I might have wiped system when I was in TWRP when I couldn't boot back after the first wipe. And I accidentally tried fastbooting Telstra img first. Anyway to get past this white Google screen? Also when I trey to go to recovery now it's the android laying on it's back with a red triangle and it says no command. Should I execute the flash-all script?
Downloaded the stock img files and ran the flash all .sh and now I am back in Android ready to mess something up again I could not thank you enough for your help I am so happy right now
xda Zed said:
Downloaded the stock img files and ran the flash all .sh and now I am back in Android ready to mess something up again I could not thank you enough for your help I am so happy right now
Click to expand...
Click to collapse
Glad to hear you got it working again. As for the recovery screen that say no command, that't the way it works with the stock recovery. When you see that screen, press and hold power and volume up. That will get you into recovery. If you happen to try rooting again and get stuck in a bootloop or some such thing, just flash the stock boot image.. That should get you going again.
Had a bad idea this morning and decided to try to root the phone, leagoo t5. The last time Im going to go messing with a phone that wasnt broken! after spending 10hrs trying to sort it! I downloaded adb tools and and twrp. I unlocked the bootloader with fastboot and installed twrp. However when I rebooted the phone it just booted straight into twrp. I cant get it to boot normally. I reinstalled the firmware but it will still not boot. I can get into recovery and factory modes but thats it. what can I do? Thanks
pcfreeze said:
Had a bad idea this morning and decided to try to root the phone, leagoo t5. The last time Im going to go messing with a phone that wasnt broken! after spending 10hrs trying to sort it! I downloaded adb tools and and twrp. I unlocked the bootloader with fastboot and installed twrp. However when I rebooted the phone it just booted straight into twrp. I cant get it to boot normally. I reinstalled the firmware but it will still not boot. I can get into recovery and factory modes but thats it. what can I do? Thanks
Click to expand...
Click to collapse
Have you tried factory resetting in recovery?
ktmom said:
Have you tried factory resetting in recovery?
Click to expand...
Click to collapse
Yes I did. No Joy. When I power on I just get the leagoo logo coming on and off repeatedly. Pressing the power button then will not turn the phone off again. I can switch it off by pressing vol- and pwr together though.
Is the problem caused by unlocking the bootloader with fastboot or that the firmware I installed is not suiting? Rebooting the phone after unlocking the bootloader before reflashing the firmware caused the leagoo logo to come on and off repeatedly accompanied by this message in very small text "Orange State - Your device has been unlocked and can't be trusted, Your device will boot in 5 seconds". After flashing the firmware with Sp Flash Tool this message is not being shown. Does reflashing firmware undo the action of unlocking the bootloader?
What your are describing is a bootloop. It sounds like the device can not find the system kernel to boot to. Did you boot the device after unlocking but before doing anything else?
Where did you get the TWRP recovery from?
Isn't this a mediatek chipset? If so, I think you need to use SP Flash Tool*to install.
I would look for a stock ROM for this device to revert to.
I'm not experienced on mediatek devices, but maybe @SubwayChamp could help.
pcfreeze said:
Yes I did. No Joy. When I power on I just get the leagoo logo coming on and off repeatedly. Pressing the power button then will not turn the phone off again. I can switch it off by pressing vol- and pwr together though.
Is the problem caused by unlocking the bootloader with fastboot or that the firmware I installed is not suiting? Rebooting the phone after unlocking the bootloader before reflashing the firmware caused the leagoo logo to come on and off repeatedly accompanied by this message in very small text "Orange State - Your device has been unlocked and can't be trusted, Your device will boot in 5 seconds". After flashing the firmware with Sp Flash Tool this message is not being shown. Does reflashing firmware undo the action of unlocking the bootloader?
Click to expand...
Click to collapse
Then to unlock bootloader is not normal that Android refuses to boot normally but when you flash a custom recovery or modify other partition this usually could happen so either or both you have to do a factory resetting/format data as @ktmom said or/and flash a kind of DM-verity for your device, this last avoids that bootloader checks the integrity of the partitions and can boot normally to system.
The warning message is normal then to unlock bootloader and reflashing the stock rom doesn´t relock it, you have to relock it at similar way that you unlocked it via fastboot command, most commom is "fastboot oem relock" but there are other variants and keep in mind that you have to return completely to stock before to apply it.
SubwayChamp said:
Then to unlock bootloader is not normal that Android refuses to boot normally but when you flash a custom recovery or modify other partition this usually could happen so either or both you have to do a factory resetting/format data as @ktmom said or/and flash a kind of DM-verity for your device, this last avoids that bootloader checks the integrity of the partitions and can boot normally to system.
The warning message is normal then to unlock bootloader and reflashing the stock rom doesn´t relock it, you have to relock it at similar way that you unlocked it via fastboot command, most commom is "fastboot oem relock" but there are other variants and keep in mind that you have to return completely to stock before to apply it.
Click to expand...
Click to collapse
I relocked the boot loader with the command "fastboot flashing lock". small white text dialogue on phone screen stated bootloader was locked successfully. rebooted phone then and it was still stuck in the boot loop. For a few seconds in between the leagoo logo a strange circular graphic was displayed on the phone with word "erasing" under it. What does this mean?
Can you tell me more about how to flash DM-verity?
pcfreeze said:
I relocked the boot loader with the command "fastboot flashing lock". small white text dialogue on phone screen stated bootloader was locked successfully. rebooted phone then and it was still stuck in the boot loop. For a few seconds in between the leagoo logo a strange circular graphic was displayed on the phone with word "erasing" under it. What does this mean?
Can you tell me more about how to flash DM-verity?
Click to expand...
Click to collapse
Ok, then to relock bootloader I guess that you did successfully boot to system again, right?
When you unlocked bootloader first then device is formatted to avoid a new user can access to the user´s data and when you relock it again the same happens.
As for DM-verity, newer devices strictly since nougat can´t boot to system after any partition was modified like happened when you flashed a custom recovery on it, here is when DM-verity can be useful, is used to avoid bootloader checks the integrity and allow a modified device can perform a reboot and more custom actions not officially permitted. You had to flash it through a custom recovery, sometimes flashing only Magisk is enough but not always.
You *might* be able to use this universal dm-verify script. It can be flashed only in a custom recovery and I'm not certain that is available to you.
ktmom said:
You *might* be able to use this universal dm-verify script. It can be flashed only in a custom recovery and I'm not certain that is available to you.
Click to expand...
Click to collapse
Good news and bad news! I got the phone to boot! I reinstalled twrp and the "magisk","no verity opt encrypt" and "disable dm verity" zips from the ext sdcard with fastboot. Twrp stated the zips installed ok but there were also some red line failure lines in the dialogue as they were being installed. I rebooted the phone via fastboot but this just resulted in it booting direct to twrp as before. I tried normal boot from twrp but it still booted straight back to twrp. I then tried selecting normal boot from the fastboot, normal, recovery option menu accessed on the Leagoo T5 by powering off the phone and then pressing the pwr and vol+ buttons together but this still resulted in it booting straight to twrp. I then decided to uninstall twrp by flashing the stock firmware recovery image to try to boot from stock recovery. I did same and rebooted from fastboot and it booted to system.
The bad news is there is an imei failure message and the sim is not connecting to the network.I googled imei failure and saw that its can happen when firmware is changed. I installed the "mobileuncle" app but according to a youtube video I watched, when I tap "Engineer Mode" there should be 2 further options available, one being MTK Mode. I am only getting one option "Engineering Mode (Android) which when I select just results in being returned to the previous menu. please say this is not a major problem!
@pcfreeze you quoted me, but as I said earlier, I'm not experienced with mediatek devices. You'd be better off quoting @SubwayChamp
pcfreeze said:
Good news and bad news! I got the phone to boot! I reinstalled twrp and the "magisk","no verity opt encrypt" and "disable dm verity" zips from the ext sdcard with fastboot. Twrp stated the zips installed ok but there were also some red line failure lines in the dialogue as they were being installed. I rebooted the phone via fastboot but this just resulted in it booting direct to twrp as before. I tried normal boot from twrp but it still booted straight back to twrp. I then tried selecting normal boot from the fastboot, normal, recovery option menu accessed on the Leagoo T5 by powering off the phone and then pressing the pwr and vol+ buttons together but this still resulted in it booting straight to twrp. I then decided to uninstall twrp by flashing the stock firmware recovery image to try to boot from stock recovery. I did same and rebooted from fastboot and it booted to system.
The bad news is there is an imei failure message and the sim is not connecting to the network.I googled imei failure and saw that its can happen when firmware is changed. I installed the "mobileuncle" app but according to a youtube video I watched, when I tap "Engineer Mode" there should be 2 further options available, one being MTK Mode. I am only getting one option "Engineering Mode (Android) which when I select just results in being returned to the previous menu. please say this is not a major problem!
Click to expand...
Click to collapse
It could be many reasons why device didn´t boot to system. Then to flash it you had to format data + flash DM-verity. Also is possible that this TWRP version is not completely suitable for your device or is unable to mount/unmount partitions correctly, you have to check from where you downloaded it and if some users are experiencing similar issues with it.
As per you IMEI lost, better is ever take a backup of the NVRAM through TWRP before to go further then it´ll be easy to recover it. In almost all firmwares for mediatek devices you´ll fnd inside the zips SPFT and SN Writer that is to recover your IMEI. Your IMEI is not really lost only got actually covered by blank codes due to a bad/incorrect flashing/wrong sequence firmware, so be careful what you do with Mobile Uncle tool if you´re not experimented with otherwise you´ll lost permanently.
SubwayChamp said:
It could be many reasons why device didn´t boot to system. Then to flash it you had to format data + flash DM-verity. Also is possible that this TWRP version is not completely suitable for your device or is unable to mount/unmount partitions correctly, you have to check from where you downloaded it and if some users are experiencing similar issues with it.
As per you IMEI lost, better is ever take a backup of the NVRAM through TWRP before to go further then it´ll be easy to recover it. In almost all firmwares for mediatek devices you´ll fnd inside the zips SPFT and SN Writer that is to recover your IMEI. Your IMEI is not really lost only got actually covered by blank codes due to a bad/incorrect flashing/wrong sequence firmware, so be careful what you do with Mobile Uncle tool if you´re not experimented with otherwise you´ll lost permanently.
Click to expand...
Click to collapse
I got into engineering mode via dialer code. CDS option was missing from connectivity. I installed https://m.apkpure.com/cds-mobile/com.doubleapaper.cds.cds_mobile but CDS is still missing from engineering mode
pcfreeze said:
I got into engineering mode via dialer code. CDS option was missing from connectivity. I installed https://m.apkpure.com/cds-mobile/com.doubleapaper.cds.cds_mobile but CDS is still missing from engineering mode
Click to expand...
Click to collapse
Sorry, just realised that this is the wrong app! nothing to do with cds in engineering mode! I triedhttps://apkcombo.com/common-data-service/com.mediatek.connectivity/
but got message that the file was corrupted and it would not install