Database Info

How to uninstall Derek DKToday - V1.73 software

Hi to all,
am using IPAQ 6365 and attempt to remove the foftware unsucessful. stored in sd card, deleted from remove program and window DKtoday.dll but still exist. From PC also deleted in the add/remove program failed.
Please advise and any input is much appreciated.

did you uncheck it from systems today items so you're sure it's not running?

Rudegar said:
did you uncheck it from systems today items so you're sure it's not running?
Click to expand...
Click to collapse
Yes, I did uncheck and icon is not display on Today page and also to make sure program is not in running mode but still in the SD storage
file.

tried deleteing it from a sdcard reader ?

Rudegar said:
tried deleteing it from a sdcard reader ?
Click to expand...
Click to collapse
need to borrow from friend and try deleting will keep posted. suspect this software crashes or conflict with others. very reluctant to do a hard reset may wipe off certain files....
Anyway thanks for your input and what's your opinion on this issue whyy cannot be deleted????

Can't change date format by Advanced Conf. Tool

Hi,
Whatever date format I choose it still remains unchanged and default in tooday screen
CF3.5 is installed...
Did I forget about something or do it in a wrong way?
By the way what is the registry directory for that option?

Did you click the Change-Button before you exited Advance Config?

youll need to soft reset after changing settings

I did both, clicked change button and reset...

[Q] How can I access again the setup Wizard?

Hello,
When we start for the first time the TF101 (after buying or flashing with a new rom after a wipe data), a setup wizard asks us for some options. In these options there is a choice for enabling 3G/Wifi or only Wifi.
I would like to know how to start again this setup wizard without wiping data!
How can I do?
Regards,
kasi

Why? Not trying to be rude, but anything you can do in setup wizard you can do already outside of that. I always delete setup.apk and setupwizard.apk from all my devices because the life of it is over after we use it initially.

because i would like to have the 3G option back ;-) And it's the only first time to have this choice.
so you tell that files are named setup.apk and setupwizard.apk ? But which one is the real file I need?
Are these files deleted after the first boot?

Those options are inside of Settings > Wireless & Networrks > Mobile Networks.

Nope.
These options were in my Settings but disapeared after Prime v1.6 update.
So to get back this Mobile Network option I have to wipe data and then restart my TF101. The setup wizard will ask me what I want to use and then I will have it.
But for the moment I lost it.
So I would like to start again the setup wizard without wiping my data.

I have the same problem, it seems that we have to go back to prime 1.5 via Nvflash for access to 3G/Wifi model. is there any way? restart to factory is not useful.

piromoplus said:
I have the same problem, it seems that we have to go back to prime 1.5 via Nvflash for access to 3G/Wifi model. is there any way? restart to factory is not useful.
Click to expand...
Click to collapse
Indeed. I've tried, after backing up my app/data, to wipe data/factory reset and same thing.
This option is no more in Settings!
Yes of course we can do a nvflash with Prime 1.5 but.... I think there is another thing to do....

Kasimodo said:
because i would like to have the 3G option back ;-) And it's the only first time to have this choice.
so you tell that files are named setup.apk and setupwizard.apk ? But which one is the real file I need?
Are these files deleted after the first boot?
Click to expand...
Click to collapse
I delete those two files by hand with root explorer..they are NOT deleted after you run them. They are no good anyway after you use the setup wizard the first time. I don't have a clue what could be your problem since just use wifi only. I would start from the very beginning and put in a rooted stock rom. Sometimes trying to save data is not worth the hassle of trying to repair the problem.

Thx for your reply life64x.
I've already tried to restore, to flash again and even to wipe/data.
But even after wiping data/factory reset the setup wizard doesn't ask me anymore to choose between "3G and Wifi" or "Wifi only".
For the apk file (setupwizard), I found it and launched it. Installation seemed to be ok but can't find a shortcut neither in Apps nor in Settings. Not even in Listed Apps for uninstall.
I think there is something missing in the Prime v1.6

Try asking the Prime author is he removed those options?

O? You bought the 3G version?
I didn't know 3G model is available any where but Italy at the moment,
sorry if I misunderstood, but why else would you want to enable 3G on a wifi only device?

andyxover said:
O? You bought the 3G version?
I didn't know 3G model is available any where but Italy at the moment,
sorry if I misunderstood, but why else would you want to enable 3G on a wifi only device?
Click to expand...
Click to collapse
no, rightnow there is not any 3g model available anywhere. but, there was a setting in previous version of prime rom, If we would be able to active 3g/wifi in setup, we can use 3g usb modems(dongle).

I assume you have ADB already, then type this line: "adb shell am start -n com.google.android.setupwizard/.SetupWizardTestActivity"
:good:

Hmmm... question from 2011.... I found since.... ^^
Thx

[SOLVED] [Q] EDGE dissappeared. What could be wrong?

Hello. I have a strange problem. My device was originally on Orange but unlocked with xtc clip.
Then I've installed custom rom (Runnymede S V4.01) and everything was OK. But when i decided to change it to Affinity 1.48.0 I've got not working EDGE, only GPRS was working for me. In SETTINGS>About phone> Network Type is Unkwown (Ussually was EDGE). I tried all radios, flashing different roms. And I've mentioned that on MIUI ROM EDGE works correctly but when I install again Sense ROM it disappears. One more thing, that with other SIM Cards everything is OK only with my Current is the problem. I've tried to put it into another phone and EDGE works fine.
What could it be?
Thanks for your answers.

you can try to edit APN configurations or manually set the apns for EDGE/3G etc.

kozalak said:
you can try to edit APN configurations or manually set the apns for EDGE/3G etc.
Click to expand...
Click to collapse
I've tried. It doesn't help.
I've partially solved my problem in this may:
1. I installed Proxuser`s Saga3D V4 ROM with STOCK kernel. (But after first run i do not get EDGE working (only GPRS)).
2. I make a factory reset from SETTINGS.
3. I boot up and get my EDGE working again.
And after this i tried again to install another ROM. This time Endymion V3.1 (Endymion V1.1 kernel). After first boot EDGE was working good, but after first reboot It disappeared again.
Could some tell? Could the reason be in KERNEL? RIL? RADIO on different kernel?
Forgot to add.. My current radio is: 20.28b.30.0805U_38.03.02.11

Hello,
Your network doesn't allow simultaneous data and voice, which in turn causes a setting in build.prop to screw up Edge. In short, you have to:
- open /system/build.prop with any editor that allows mounting /system as writable (ES File Explorer works fine for me and comes pre-installed in Endy)
- Look for a line that says: "ro.ril.enable.dtm=1"
- change to "ro.ril.enable.dtm=0"
- Save, reboot and you're done
Cheers
hvs_ual said:
I've tried. It doesn't help.
I've partially solved my problem in this may:
1. I installed Proxuser`s Saga3D V4 ROM with STOCK kernel. (But after first run i do not get EDGE working (only GPRS)).
2. I make a factory reset from SETTINGS.
3. I boot up and get my EDGE working again.
And after this i tried again to install another ROM. This time Endymion V3.1 (Endymion V1.1 kernel). After first boot EDGE was working good, but after first reboot It disappeared again.
Could some tell? Could the reason be in KERNEL? RIL? RADIO on different kernel?
Forgot to add.. My current radio is: 20.28b.30.0805U_38.03.02.11
Click to expand...
Click to collapse

lowveld said:
Hello,
Your network doesn't allow simultaneous data and voice, which in turn causes a setting in build.prop to screw up Edge. In short, you have to:
- open /system/build.prop with any editor that allows mounting /system as writable (ES File Explorer works fine for me and comes pre-installed in Endy)
- Look for a line that says: "ro.ril.enable.dtm=1"
- change to "ro.ril.enable.dtm=0"
- Save, reboot and you're done
Cheers
Click to expand...
Click to collapse
Oh yes. You're right. My network doesn't support simultaneous voice and data.
Thank you for your answer. I'll try and report the result.

lowveld said:
Hello,
Your network doesn't allow simultaneous data and voice, which in turn causes a setting in build.prop to screw up Edge. In short, you have to:
- open /system/build.prop with any editor that allows mounting /system as writable (ES File Explorer works fine for me and comes pre-installed in Endy)
- Look for a line that says: "ro.ril.enable.dtm=1"
- change to "ro.ril.enable.dtm=0"
- Save, reboot and you're done
Cheers
Click to expand...
Click to collapse
I tried what you suggested, but the network still shows "G" instead of "E" even after changing the value of the dtm to 0.
Any suggestions?

lowveld said:
Hello,
Your network doesn't allow simultaneous data and voice, which in turn causes a setting in build.prop to screw up Edge. In short, you have to:
- open /system/build.prop with any editor that allows mounting /system as writable (ES File Explorer works fine for me and comes pre-installed in Endy)
- Look for a line that says: "ro.ril.enable.dtm=1"
- change to "ro.ril.enable.dtm=0"
- Save, reboot and you're done
Cheers
Click to expand...
Click to collapse
It works. Thank you for your recommendation.
enigmaamit said:
I tried what you suggested, but the network still shows "G" instead of "E" even after changing the value of the dtm to 0.
Any suggestions?
Click to expand...
Click to collapse
First you should change that settings line in /system/build.prop and than do a factory reset from settings. And then you'll get want you need.

hvs_ual said:
It works. Thank you for your recommendation.
First you should change that settings line in /system/build.prop and than do a factory reset from settings. And then you'll get want you need.
Click to expand...
Click to collapse
A factory reset!! So you mean i need to set up everything all over again?!!

enigmaamit said:
A factory reset!! So you mean i need to set up everything all over again?!!
Click to expand...
Click to collapse
Yeah. But you can do a full backup with Titanium backup! Do factory reset and then restore your stuff back.
Also you can try with nandoid backup, from recovery, it should work too.

enigmaamit said:
A factory reset!! So you mean i need to set up everything all over again?!!
Click to expand...
Click to collapse
In my case, I restarted the phone without a sim card, then inserted a different sim card and it detected EDGE network, after that i reinserted my original sim card and the EDGE network was there.
Try if it helps.
Sent from my HTC Vision using Tapatalk

ajhavery said:
In my case, I restarted the phone without a sim card, then inserted a different sim card and it detected EDGE network, after that i reinserted my original sim card and the EDGE network was there.
Try if it helps.
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
Thanks a ton for that tip!!
Saved me from doing a factory reset!!
I just removed the sim, put in another sim and booted up... it didnt have gprs activated but was from a different carrier.
Then i switched off again, swapped my original sim back into the phone and when i booted up, EDGE is back!!
Thank you for that tip. You're a lifesaver!

Great. Now problem is SOLVED!
Thanks to all who helped.

Thank's It was helpful.

[Q] T-Con

Hello, I am a nubee to this forum and the Asus TF700T that I own. I selected the wrong firmware update(WW_epad-10.X.X.X_2012xxxx now pending an install on my system tray) needed US_epad-10.X.X.X_2012xxxx. Can anyone tell me how to eliminate the pending update. Thanks ... Tony

What do mean you selected the wrong firmware? Is this something you did for an ota update?
Sorry can you give more details please.

T-Con
sbdags said:
What do mean you selected the wrong firmware? Is this something you did for an ota update?
Sorry can you give more details please.
Click to expand...
Click to collapse
Yes, I went to the Asus site using my TF700. After I entered Android for the OS prompt, I selected download firmware. There were 10 files. Next - the screen wouldn't display the full list of available selection on my Tablets screen. I tried to move away with a swipe and the first selection(WW_epad-10.X.X.X_2012xxxx), the only selection displayed, began to download. Other than shutting off the WiFi I couldn't stop the download and it now sits in the system tray of my tablet waiting for me to installed it. From what I can tell the firmware update I should have selected was US_epad-10.X.X.X_2012xxxx. So, it is my thought that if I allow WW_epad-10.X.X.X_2012xxxx to install I may render the Tablet unusable. If screen shots help I am sure I can get them to you provided that I have effectively explained the situation. Since I am a newb I can't enter the Asus URL for your convenience. But, Thanks for the reply. I can use the help. Regards Tony (T-Con)

T-Con said:
Yes, I went to the Asus site using my TF700. After I entered Android for the OS prompt, I selected download firmware. There were 10 files. Next - the screen wouldn't display the full list of available selection on my Tablets screen. I tried to move away with a swipe and the first selection(WW_epad-10.X.X.X_2012xxxx), the only selection displayed, began to download. Other than shutting off the WiFi I couldn't stop the download and it now sits in the system tray of my tablet waiting for me to installed it. From what I can tell the firmware update I should have selected was US_epad-10.X.X.X_2012xxxx. So, it is my thought that if I allow WW_epad-10.X.X.X_2012xxxx to install I may render the Tablet unusable. If screen shots help I am sure I can get them to you provided that I have effectively explained the situation. Since I am a newb I can't enter the Asus URL for your convenience. But, Thanks for the reply. I can use the help. Regards Tony (T-Con)
Click to expand...
Click to collapse
Go to the file manager or the downloads app and delete the downloaded file from sdcard/download. Then redownload the correct one. The notification is not a prompt to install but notification of a downloaded file.

T-Con
sbdags said:
Go to the file manager or the downloads app and delete the downloaded file from sdcard/download. Then redownload the correct one. The notification is not a prompt to install but notification of a downloaded file.
Click to expand...
Click to collapse
Sorry ... no such file exists. The only things visible are folders
1. Bloomberg,
2. FQA,
3. Manual,
4 VibeDownload
Thanks again. Tony(T-Con)

T-Con said:
Sorry ... no such file exists. The only things visible are folders
1. Bloomberg,
2. FQA,
3. Manual,
4 VibeDownload
Thanks again. Tony(T-Con)
Click to expand...
Click to collapse
What file is on the root folder of your internal memory?

T-Con
sbdags said:
Go to the file manager or the downloads app and delete the downloaded file from sdcard/download. Then redownload the correct one. The notification is not a prompt to install but notification of a downloaded file.
Click to expand...
Click to collapse
One other thing to say. The exact info. on the screen says in bold "Asus System Firmware Update Service" then in smaller words "New system firmware available, press upgrade."
Thanks for the response. Tony(T-Con)

T-Con
sbdags said:
What file is on the root folder of your internal memory?
Click to expand...
Click to collapse
So, I select file manager. It takes me to > Internal Storage and shows a small folder icon with back arrow / sdcard /
I tap the back arrow folder and slide/scroll down to root folder.
Tap root folder and there is nothing there.
Thanks again. Tony(T-Con)

T-Con said:
One other thing to say. The exact info. on the screen says in bold "Asus System Firmware Update Service" then in smaller words "New system firmware available, press upgrade."
Thanks for the response. Tony(T-Con)
Click to expand...
Click to collapse
Ah it looks like you have downloaded the ota file manually. Not sure how to progress now. It's stored in the cache somewhere. Do a search on here about applying incremental ota updates manually and you will see some posts that instruct you how to reset the download.

T-Con
sbdags said:
Ah it looks like you have downloaded the ota file manually. Not sure how to progress now. It's stored in the cache somewhere. Do a search on here about applying incremental ota updates manually and you will see some posts that instruct you how to reset the download.
Click to expand...
Click to collapse
K thanks! I have also put in a req. to Asus for help. If I don't find an exact instructional resolution on this issue I will call Asus for help. Thanks again and best regards. Tony (nubee T-Con)

first. you should have postet it to the Q&A.
Second: if you've downloaded the file from the asus site, it should be a zip file. which you would find by opening the app drawer, open "downloads" there the file will be, you can delete it.
then the message won't show up again.
then make sure every app is installed, that was installed when you buoght the pad.
tehn go to "about phone" update and check for updates, maybe try several times. then an update should appear, install it. repeat until you've the latest version
if that doesnt work, check out the summary in android general in this forum, and look for update ota without losing root, there you should find the ota packages and how to manually apply them
geri