Related
Hello, i'm a bit in trouble with my internal storage.
Yesterday i wanted to update to newest havoc os so i prepared as usual and wiped system and data under advanced wipe in TWRP ( twrp-3.2.3-0-enchilada(mtp) from joemossjr ).
Then things went strange... op6 reboots itself and since there was no system installed got stuck. i rebooted to TWRP and it started like first time install.
I wanted to do the TWRP Setup but TWRP freezes everytime and after some seconds the device reboots.
I tried different TWRP (joemossjr, eng.stck), tried flashing manually with fastboot flash boot_a twrp.img fastboot flash boot_b twrp.img and even with Tool All In One from mauronofrio
but only recovery that doesn't freeze is newest official TWRP 3.2.3.0.
But now i can't get access to my internal storage. The TWRP filemanager and adb shell are showing weird folders ( see attached jpg ).
It seems something is corrupted... i also tried to flash stock op6 rom in fastboot "OnePlus6Oxygen_22_OTA_015_all_1808102118_770880-FASTBOOT" with flash-all-partitions-fastboot.bat.
Seems to work but got stuck at bootanimation...
flashed back official TWRP and i think i have to install magisk now but don't know how to do because i have no access to my internal storage.
at this point i wish they would have included a sdcard slot
suggestion anyone?
It's not corrupted, but it's encrypted, when you flashed the havoc rom you kinda ****ed up with the encryption method so now you got files that are encrypted and that you can't decryp, so your solution is to format your internal storage, sorry for you, and if anyone have another solution i would take it
do an adb sideload for magisk zip , that should help
adb sideload sadly doesn't work, just "Starting ADB Sideload feature" ...
and on cmd when i try to adb sideload i got an "error: closed"
can't figure out why the files should be encrypted... makes no sense to me
now i flashed flash-system-boot-vendor.bat
phone boots till startup wizard and then after few seconds freeze and reboot
gdre said:
now i flashed flash-system-boot-vendor.bat
phone boots till startup wizard and then after few seconds freeze and reboot
Click to expand...
Click to collapse
Format data. Problem fixed. This is the ONLY SOLUTION that will work.
Yup, you need to format the data and start all clean and i hope you did a full twrp backup
yes i do always make a backup before flashing something... my problem is i don't have access to files on internal storage.
Data partition is not my problem because all my apps are stored with titanium backup but in the freaking internal memory.
i wiped data partition but it doesnt help... now i have all folders like after complete reset. but i dont know how to get access to my old files in /sdcard folder.
i think of deleting internal storage also and start from scratch and try some data recovery tools... maybe i have some luck.
use Tool all in one
gdre said:
yes i do always make a backup before flashing something... my problem is i don't have access to files on internal storage.
Data partition is not my problem because all my apps are stored with titanium backup but in the freaking internal memory.
i wiped data partition but it doesnt help... now i have all folders like after complete reset. but i dont know how to get access to my old files in /sdcard folder.
i think of deleting internal storage also and start from scratch and try some data recovery tools... maybe i have some luck.
Click to expand...
Click to collapse
Did you ever actually try to flash the Havoc update? What's going on is that you flashed a rom on the August security patch and OOS is still on July. You can't roll back to an earlier patch. Only a rom on the current patch will work.
If it doesn't work, as several have said, you have to format data, not just wipe. That will unfortunately, erase everything on your phone, but there's no other way to go back to OOS.
ok iElvis... things start getting interesting
hmm i want to try that but how should i be able to do that...
how does it work flashing the havoc with all in one tool or could it be done in fastboot mode per cmd?
the phone came with oos 5.1.5 and used that a while then with xXx NoLimits 2.4 over it for a few weeks.
after that havoc os from 6.8.18 for a month or so and i want that as daily driver.
then yesterday updated with fresh install to version from 28.8.18 and setup everything then after reboot wifi was complete dead and SIM also.
flashed newest smurf kernel over and all worked again till next reboot.
i decided to install again from scratch and thats the point where things getting weird...
gdre said:
ok iElvis... things start getting interesting
hmm i want to try that but how should i be able to do that...
how does it work flashing the havoc with all in one tool or could it be done in fastboot mode per cmd?
the phone came with oos 5.1.5 and used that a while then with xXx NoLimits 2.4 over it for a few weeks.
after that havoc os from 6.8.18 for a month or so and i want that as daily driver.
then yesterday updated with fresh install to version from 28.8.18 and setup everything then after reboot wifi was complete dead and SIM also.
flashed newest smurf kernel over and all worked again till next reboot.
i decided to install again from scratch and thats the point where things getting weird...
Click to expand...
Click to collapse
Yep, that's the security patch issue. Once you're on a patch, going back to an earlier one will break encryption. I don't believe there's any other option beyond formatting data.
iElvis said:
Yep, that's the security patch issue. Once you're on a patch, going back to an earlier one will break encryption. I don't believe there's any other option beyond formatting data.
Click to expand...
Click to collapse
ok... formated whole storage and installed OnePlus6Oxygen_22_OTA_012_all_1806140300_e4bacf-FASTBOOT_5.1.8.
but while first setup stll freeze and reboot. also wiped again with stock recovery with no change.
bootloader is unlocked... should i now flash patched boot image with magisk for 5.1.8?
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Using this will save you time before you **** something up
gdre said:
Hello, i'm a bit in trouble with my internal storage.
Yesterday i wanted to update to newest havoc os so i prepared as usual and wiped system and data under advanced wipe in TWRP ( twrp-3.2.3-0-enchilada(mtp) from joemossjr ).
Then things went strange... op6 reboots itself and since there was no system installed got stuck. i rebooted to TWRP and it started like first time install.
I wanted to do the TWRP Setup but TWRP freezes everytime and after some seconds the device reboots.
I tried different TWRP (joemossjr, eng.stck), tried flashing manually with fastboot flash boot_a twrp.img fastboot flash boot_b twrp.img and even with Tool All In One from mauronofrio
but only recovery that doesn't freeze is newest official TWRP 3.2.3.0.
But now i can't get access to my internal storage. The TWRP filemanager and adb shell are showing weird folders ( see attached jpg ).
It seems something is corrupted... i also tried to flash stock op6 rom in fastboot "OnePlus6Oxygen_22_OTA_015_all_1808102118_770880-FASTBOOT" with flash-all-partitions-fastboot.bat.
Seems to work but got stuck at bootanimation...
flashed back official TWRP and i think i have to install magisk now but don't know how to do because i have no access to my internal storage.
at this point i wish they would have included a sdcard slot
suggestion anyone?
Click to expand...
Click to collapse
This was happens every day after when i try to mod my device.
When i see weired Folder. I boot to fastboot then flash fastboot twrp. Img.(this will shows all folders with normal names)
Then flash liquid remix rom(its my saviour)
Then flash twrp.Installer.
Then reboot to Recovery and restore my liquid rom backup and boom its boot to everything normal.
Here i want to say that keep one liquidremix rom in otg pendrive.
After fastboot twrp command when u gets working twrp.
Install that rom via otg, and flash twrp installer and then reboot back to twrp and then clean flash rom u want it will work without doing formatting or fastboot flashing stock rom which erase everything everytime
@ whizeguy... did that as mentioned before and gave me the freeze after first time reboot
@ pankspoo... ok i cant understand what is causing this issue but if you say that did the trick for you than i will buy me a otg adapter and check that out.
silly that i already deleted everything and sadly with no affort...
but i dont understand why im not able to boot anymore even after deleting everything
gdre said:
@ whizeguy... did that as mentioned before and gave me the freeze after first time reboot
@ pankspoo... ok i cant understand what is causing this issue but if you say that did the trick for you than i will buy me a otg adapter and check that out.
silly that i already deleted everything and sadly with no affort...
but i dont understand why im not able to boot anymore even after deleting everything
Click to expand...
Click to collapse
Fastboot method of installing rom will work 100%, have u used flash all. Bat (just unzip ur downloaded fastboot rom, connect phone to comp in fastboot mode and click on flash all bat file) command while installation.
Use that command because u have soft bricked u r device.
That installation will boot to normal oos rom.
I think u r doing something wrong.
Hmm thats exactly what i did.
In cmd there are some errors like sparse blabla but finally it completes but with freeze and reboots during startup assistent.
I bought an otg adapter today. Flashed liquid remix and that worked! All seems fine no freezes and reboots but wifi and signal still broken...
Very confusing
gdre said:
Hmm thats exactly what i did.
In cmd there are some errors like sparse blabla but finally it completes but with freeze and reboots during startup assistent.
I bought an otg adapter today. Flashed liquid remix and that worked! All seems fine no freezes and reboots but wifi and signal still broken...
Very confusing
Click to expand...
Click to collapse
U have u r efs backup? If have then restore it via twrp.
That will give u ur signal and wifi
That is what im thinking of...in fastboot there are no infos at bootloader and baseband Version. unfortunately my efs Backup is gone since internal storage messed up.
If i could recover some data that could help but 2 tools i tried yet didnt work.
Tomorrow ill try making raw dump and see If this would help.. still looking for the best guide or method
hey guys i finally got my twrp back up and running here it is and i fixed format issue it had also supports f2fs now which is what stock uses and added a couple extra parititons it mounts and backs up
use cmd to flash twrp:
fastboot flash recovery updated-hannah-twrp-2019.img
hannah twrp:
https://drive.google.com/file/d/1ahEDJRaW6ZbpF7EgokQtQ6TEJ8yBUa9d/view?usp=drivesdk
cmd for nora:
fastboot flash recovery nora-twrp.img
nora twrp:
https://drive.google.com/file/d/12IPnevc7si2sNpxChMtPo5JJgwY4DJXh/view?usp=drivesdk
Sry i went MIA had alot happen lately so anyways im back here u go
for decryption patch a backed up boot.img with magisk beta both preserve boxes unchecked then flash in twrp as boot.img and flash zip below thanks @whodat711 for zip
https://drive.google.com/file/d/1-C4-ktJmW_oeyP1f5SAPGy3CX90mDuts/view?usp=drivesdk
then format data not wipe but format data button then type yes and press back all the way to main menu then flash masgisk 18.0.zip then reboot and it will not encrypt and u will have to start over as if phone is brand new ie. setting up google but enjoy ur decrypted e5+......
1.boot twrp and backup boot.img
2.make patched boot.img with magisk all perserve boxes unchecked while making it with magisk manager
3.flash twrp
4.flash patched boot.img and decryption zip from third link in post
5.format button in wipe section
6.flash magisk
7.reboot
Stock ROM MetroPcs xT1927-4 Hannah_T running good
skullkid383 said:
First and foremost I want to thank everyone in the twrp building group on telegram and @TwrpBuilder for the amazing guide on how to build twrp and guidance they gave to build this twrp
https://github.com/TwrpBuilder/twrpbuilder_tree_generator/wiki
So here is the twrp I built
https://drive.google.com/file/d/1aNTE6iAQQ4Ty1Zr1oM9ADb7xX_slrTzt/view?usp=drivesdk
After u flash twrp u need to edit fstab to disable force encryption then wipe phone flash latest beta magisk and ur all set
Refer to this guide for
Force encryption fstab file and how to disable force encryption thanks for this @CodyF86
https://forum.xda-developers.com/moto-e5/development/recovery-twrp-moto-e-5-play-james-t3796323
Click to expand...
Click to collapse
just installed your Hannah-twrp.img and it booted just fine everything works thanks
Can you correct me if I'm wrong. So once I finish this process. I can go in and out of recovery with out computer. Also Then I can put apps directly into priv system with correct read and write,plus it will stick on reboots. Just wondering to .If this means I can flash custom kernals and roms with no worries other than normal issues. Thanks for your work.
Thank you so much for this!
jokono421 said:
Can you correct me if I'm wrong. So once I finish this process. I can go in and out of recovery with out computer. Also Then I can put apps directly into priv system with correct read and write,plus it will stick on reboots. Just wondering to .If this means I can flash custom kernals and roms with no worries other than normal issues. Thanks for your work.
Click to expand...
Click to collapse
Yes sir
jokono421 said:
Can you correct me if I'm wrong. So once I finish this process. I can go in and out of recovery with out computer. Also Then I can put apps directly into priv system with correct read and write,plus it will stick on reboots. Just wondering to .If this means I can flash custom kernals and roms with no worries other than normal issues.
Click to expand...
Click to collapse
So you can actually boot from device now yes awesome ...
Keeps trying to force encryption but fails when flashing a gsi.
Is there a way around this? No verity for this device?
JimmyJurner said:
Keeps trying to force encryption but fails when flashing a gsi.
Is there a way around this? No verity for this device?
Click to expand...
Click to collapse
Are u on stock with root I got easy solution for u to follow if fstab guide above is to hard
Hey skullkid383, thankyou for your work on this!! Twrp flashed and works NP. But I cannot decrypt. Following steps, the step you mount before pushing in twrp adb does not work, no such folder. The push goes thru fine although the mount did not. Format data worked, I can see internal storage and move things to and from PC through tether. But when I reboot its sticks on moto screen. When I flash back to patched boot for magisk the is boots to an "decryption unsuccessful" msg and asks me to reset the phone endlessly. Any help pls?
Project89Odin said:
Hey skullkid383, thankyou for your work on this!! Twrp flashed and works NP. But I cannot decrypt. Following steps, the step you mount before pushing in twrp adb does not work, no such folder. The push goes thru fine although the mount did not. Format data worked, I can see internal storage and move things to and from PC through tether. But when I reboot its sticks on moto screen. When I flash back to patched boot for magisk the is boots to an "decryption unsuccessful" msg and asks me to reset the phone endlessly. Any help pls?
Click to expand...
Click to collapse
I'm looking into how to flash fstab in a zip cause I don't think fstab worked for some reason try patched boot.img here see if it changes anything wipe after flash https://drive.google.com/file/d/1s-nS6rLk1tnO1JVFO1emTJdGcO6mNhBk/view?usp=drivesdk
With this boot and wiping after fastboot and twrp installs it boots past moto logo but hangs with the decryption unsuccessful msg
Project89Odin said:
With this boot and wiping after fastboot and twrp installs it boots past moto logo but hangs with the decryption unsuccessful msg
Click to expand...
Click to collapse
Ok so ur fstab is not edited for some reason so do u have a old stock backup I will have u change fstab manually in stock then boot to the twrp and wipe
I do not, I'll have to fastboot flash everything back to revert to stock. Was rockin with no SD tonight.
Project89Odin said:
I do not, I'll have to fastboot flash everything back to revert to stock. Was rockin with no SD tonight.
Click to expand...
Click to collapse
Grrr always make backup rule number one lol ok I'm looking into getting a flashable zip made but in mean Time revert stock tell me when booted
Back up fully stock, not even twrp lol. Metropcs variant btw
Project89Odin said:
Back up fully stock, not even twrp lol. Metropcs variant btw
Click to expand...
Click to collapse
1st make a backup just in case:
Ok here we go flash twrp and magisk beta then patched boot.img boot system get a file explorer with root permissions edit fstab.qcom find it here: /vendor/etc.
just replace current one with one I'm uploading
in guide to make easier to find wipe then u should be good of course flash magisk beta after u wipe as well
Hmm still decryption unsuccessful. About to reflash to stock. Sorry for the slow response. I have the next several hours free to test. I don't have an SD card, so i rooted the old way, using your patched boot, then used es file explorer to replace fstab, rebooted to confirm, and fstabs permissions had changed from rw r r to rw rw so it stuck. once I format data and internal becomes visible I move magisk over, flash then reboot and get dencryption unsuccessful. Also even flashing the recovery before formatting resulted in it being lost every reboot, only after format data it stuck.
Project89Odin said:
Hmm still decryption unsuccessful. About to reflash to stock. Sorry for the slow response. I have the next several hours free to test. I don't have an SD card, so i rooted the old way, using your patched boot, then used es file explorer to replace fstab, rebooted to confirm, and fstabs permissions had changed from rw r r to rw rw so it stuck. once I format data and internal becomes visible I move magisk over, flash then reboot and get dencryption unsuccessful. Also even flashing the recovery before formatting resulted in it being lost every reboot, only after format data it stuck.
Click to expand...
Click to collapse
Ok I am going to build new one in awhile my PC screen broke idk when but until then the link to Hannah twrp is down till I fix it
Ah man, so instead of fastboot flashing everything back to stock, I figured I'd just flash stock recovery back, after the decryption unsuccessful route. Flashed stock recovery, when it booted and asked me to reset the phone instead of going to twrp this time it went to the stock recovery image of a reset...phone booted, got to looking around and holy crap I'm decrypted! flashed your twrp and now I'm rooted with twrp and decrypted!! So maybe boot twrp the first time when formatting data and decrypting so when you boot and the device asks you to reset because of decryption failure it can use stock recovery to complete the process, then flash twrp for the finish? Your incredibly helpful man, again thankyou for all of your efforts and work on this!!
Still wanna fix twrp found a issue in formatting data I wanna fix but it shall take some time to get it done link is down til then cause it's something that needs fixed first before I put it back up
Hello everyone,
First of all, rom and recovery are not from me... I just want to make a full guide to help you
So let's go !!!!!
1 step: unlock bootloader
https://en.miui.com/unlock/
BE CAREFUL unlocking your bootloader will erase all your data (internal storage) so don't forget to make a backup
2 step: flash twrp recovery
Download the recovery image from here
https://drive.google.com/file/d/1-1CSfT4lQwFZngu6RI9eowLA9CmEMEPw/view?usp=drivesdk
Be sure to have adb and fastboot tools on your computer ... If not take a look at here
https://forum.xda-developers.com/showthread.php?t=2317790
Past TWRP_umi.img on minimal adb and fastboot directory.
Open a cmd here.
Enable usb debugging on your device
Reboot your phone on bootloader (hold volume down + power), connect it to PC and tape:
fastboot devices
fastboot flash recovery TWRP_umi.img
Then tape fastboot reboot while holding volume up button on your devices to reboot in recovery
3 step:
At the first launch of Twrp You have to choose SWIPE TO ALLOW MODIFICATION
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Otherwise the ROM will not boot.
5 step:
Reboot into recovery from twrp.
6 step:
Connect your phone to your PC and paste the xiaomi.eu ROM of your choice (stable or Dev)
7 step:
Flash ROM from recovery
8 step:
REBOOT AND ENJOY :good::good::good:
Does Xiaomi EU Rom run either on encrypted and unencrypted storage?
I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:
carolef1984 said:
I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:
Click to expand...
Click to collapse
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on
-fluffy- said:
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on
Click to expand...
Click to collapse
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.
carolef1984 said:
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.
Click to expand...
Click to collapse
write what u do wen u try to flash the zip
an have u downloadet the correct zip file
Thanks everyone, i think it must have been something to do with the qualcomm drivers installed incorrectly. i have re-done that from scratch and managed to get mi flash tool working. Sorry to waste everyones time.
Greetings
I have followed the tutorials to perfection like 2-3 times and I still face the same issue
I always go back to TWRP after trying to boot into system.
I have tried 2 different recovery files
The experimental one asks for a password. and the other one works but keeps going back to recovery after flashing.
MIUI 11 rom
MIUI 12 rom
No matter what I do It keeps going back to recovery.
It's my only device so I truly need help.
I have tried re installing everything already.
At this point I just want to install stock rom and keep using it without flashing anything please help.
PHONE FINALLY REBOOTING INTO SYSTEM. I myself don't know what i did!!!
Bootloop (stuck on 5G logo) after flashing Xiaomi.eu ROM
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.
andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.
Click to expand...
Click to collapse
try this
format data
reboot recovery
connect phone to pc
put zip file ro phone
wipe cache an dalvik cache
install zip
wipe again
reboot recovery
wipe again
go to reboot
power off the phone
now wen its shut down power it on
an it shut boot
it will take a litle time
andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.JBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBM
Thank you very much.
Click to expand...
Click to collapse
hi didt it work for u
IT WORKED properly like a charm!!!
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 12:57 PM ---------- Previous post was at 12:47 PM ----------
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 01:15 PM ---------- Previous post was at 12:57 PM ----------
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
Quick questions, do netflix and google pay work after the flash?
tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
yes
cedric3320 said:
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Click to expand...
Click to collapse
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...
adario73 said:
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...
Click to expand...
Click to collapse
Hello,
You have to format data the first time you flash xiaomi.eu rom because their rom is base on Chinese firmware (if you don't or just wipe it will not boot)
Each time you will flash a rom with different base (from Chinese base to global base or global to Chinese) you will have to format data !!
You format data to remove encryption.
tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
Google pay isn't working as the safety net doesn't pass on stable realeses, someone made it to work on betas but I had no luck though
Stuck without solutions
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.
Dallee said:
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.
Click to expand...
Click to collapse
an what is the latest miui12 u try to flash
Hi all.
Today I unlocked my phone to flash the crDroid rom. First I went into fastboot to flash mauro's twrp and that worked fine. Then I flashed the miui 12.0.3 full stock image from twrp, which might have been a mistake since I flashed the full image instead of an extracted vendor / firmware version. Then I wiped system, cache and data and flashed twrp but when I tried to boot the phone it went into an infinite boot screen. Then I wiped and flashed the whole stock miui image again in the hope that I would at least be able to boot miui but that also failed, since the phone kept booting back to recovery and there was no boot screen at all.
I have also tried flashing the stock image (ver 12.0.6) from fastboot but it fails because of the anti rollback check error. The image I tried to flash has an antirollback version of 0 while my phone has a version of 1, so "current device antirollback version is greater than this package" is what I got. Now my options are very limited because for some reason my laptop can't access the file system of the phone so I can't transfer files to the phone anymore and the ADB sideload feature from twrp is not working, so I only have fastboot (adb also won't recognize my device). What can I do to save my phone? Any help is greatly appreciated.
Flash the MIUI with MiFlash.
Had sort of the same issue...
Try using adbfastboot tool ( it's a java programme ) to swap recoveries.
I got the bootloop after installing the LOS recovery , installed twrp from adbfastboot tool and got it working.
Nice to have working recovery but since adb sideload is broken in twrp i needed LOS recovery.
Tried to reflash the LOS recovery from the tool and this time it worked
Flash with Miflash (the latest version https://xiaomiflashtool.com/ option CLEAN ALL) the rom that was on your phone when you bought it.
For the roms It is better to flash firmwares with Miflash because TWRP is not 100% functional.
grt67DFqyu said:
Flash the MIUI with MiFlash.
Click to expand...
Click to collapse
Man I can't believe such a simple suggestion would work but it did thanks! Initially I did not flash with miflash because it prompted me to install drivers and it crashed when I clicked the install button, turns out all I had to do was create a folder named log in the miflash directory lol. So flashing the stock image works. And it definitely boots correctly to miui with the clean all and lock option.
But now when I try to flash crdroid or pixel experience I still end up with an infinite boot screen even when using exactly the specified firmware :/ Like you see crdroid and pixelexp boot animations correctly but it lasts forever. I must be doing something wrong with the firmware still because that's the only reason I can think of why it won't boot. After I flash the firmware in miflash I don't have to boot miui up first right? I'm using the 'save user data' option in miflash if that matters.
In my post, I specified CLEANALL, but anyway, you must format data before flashing.
Which rom do you want to install Cdroid or Pixel?
NOSS8 said:
In my post, I specified CLEANALL, but anyway, you must format data before flashing.
Which rom do you want to install Cdroid or Pixel?
Click to expand...
Click to collapse
I'm now trying to flash crdroid. After flashing V12.0.3.0.QJKMIXM in miflash with flash_all, I formatted data in twrp (the one where you have to type yes) but also with a decrypt & normal factory reset I still get the same result. After the format, I flashed crdroid without magisk and gapps, and it'll just hang on the crdroid boot screen :/. The weird thing is, before I flash the crdroid rom it can boot in MIUI just fine and it'll show that it's indeed the correct 12.0.3.0 in the settings so I have no idea if it's just the crdroid ROM at this point.
Flash with miflash V12.0.3.0.QJKMIXM reboot system and go fasboot when affiche "devices is locked",flash chinesse twrp ,reboot twrp,format data reboot twrp,wipe all ecxept OTG reboot twrp,flash Cdroid format data,reboot twrp flash gapps,reboot system( take time ).
NOSS8 said:
Flash with miflash V12.0.3.0.QJKMIXM reboot system and go fasboot when affiche "devices is locked",flash chinesse twrp ,reboot twrp,format data reboot twrp,wipe all ecxept OTG reboot twrp,flash Cdroid format data,reboot twrp flash gapps,reboot system( take time ).
Click to expand...
Click to collapse
This ended up working perfectly Crdroid is now running like a charm with gapps and magisk. Thank you guys a lot for helping me out with this!
I have a Redmi note 8 with MIUI 12 installed. Bootloader is unlocked and the phone is rooted.
When I try to flash TWRP recovery in fastboot mode using my PC, it successfully flashes and boots into the TWRP recovery. TWRP does not ask for any password for decrypting the files, and when I go to install>sdcard then the storage is all in random letters, completely unrecognizable.
I have tried a lot of tutorials on youtube but none of them worked. I tried flashing the latest version of TWRP, didn't work. I tried formatting all data and rebooting back into recovery mode, didn't work. (if you reboot to system after installing TWRP, the phone automatically deletes TWRP and the next time you open recovery mode you just get the default MI recovery, and you have to flash TWRP again to open TWRP recovery.) I tried almost everything on the internet but none of it worked. Is there any way I can make it ask for the decryption password? or have my files decrypted? I just need the TWRP for a one-time-use to install a custom ROM. I don't need it to be installed permanently, but no problem even if it does get installed permanently. I just want my custom ROM.
Please help
does that work?:
Boot into twrp, then
Code:
adb shell
twrp decrypt myPassword
(myPassword is your user password)
User699 said:
does that work?:
Boot into twrp, then
Code:
adb shell
twrp decrypt myPassword
(myPassword is your user password)
Click to expand...
Click to collapse
It didnt work, "failed to decrypt data" i typed the right password
#JKTheBaskieBoy said:
It didnt work, "failed to decrypt data" i typed the right password
Click to expand...
Click to collapse
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.
the correct and recommend way to install TWRP is
Flash TWRP
Erase userdata partition <~ it's important to do this as soon as possible since booting your device would just encrypt everything again
Format userdata partition
by doing this you would be able to access data partition files and folder would not be random letters.
User699 said:
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.
Click to expand...
Click to collapse
Sorry for the late reply. Earlier i just gave up on installing the custom ROM and continued with my stock from. Today a tried again, installed TWRP and turns out it is not showing random letters now. its all regular storage. i didn't even do anything to decrypt it lol it just fixed itself. Now I will install the room myself. Thank you for your help though
Ah sh** here we go again. So i installed the custom rom successfully and everything worked fine, the TWRP too. but when I tried to flash a magisk patched image (the image that I used to root my phone in MIUI) then it got stuck in the boot screen. I had to flash the stock fastboot rom again.. And as expected from my piece of **** that xiaomi calls a phone, TWRP will show encrypted folders, and does not ask for a password. Same problem. Rooted my phone again, using the magisk root image, and it worked like usual, the phone rooted. Now i am stuck again in this bs. I guess I will wait for about 4-5 days and continue using the phone like normal. Maybe it will work again this time. I will try your method here first
User699 said:
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.
Click to expand...
Click to collapse
Okay i tried wiping the data, cache and dalvik but it shows a huge essay of "error opening xxx/xxxx" in red text. Data wipe failed.
See you after like 4-5 days... hopefully
Update. I finally found a solution. It took literal hours of experimenting to find this.
-Flashed the fastboot ROM of the phone
-Rooted the phone by flashing magisk patched image
-Flashed Inception kernel via FK kernel manager
-Rebooting after flashing the kernel, It will get stuck in a black screen with no text whatsoever (probably a bootloop)
-Installed TWRP (This time TWRP does not show encrypted letters), Wiped all data, Transferred the custom ROM zip to the phone (while in TWRP) and flashing the rom
-The rom is flashed successfully. On the first reboot you get greeted with another bootloop. Fortunately the phone booted into TWRP. This time the folders are encrypted again.
-Successfully wiped the data (advanced>wipe data). No errors in data wiping this time.
-A fully working Corvus OS setup appears on rebooting.
I think the whole TWRP problem was fixed by the custom kernel. Anyways I am finally done with this now. You probably enjoyed seeing all this xD
#JKTheBaskieBoy said:
Update. I finally found a solution. It took literal hours of experimenting to find this.
-Flashed the fastboot ROM of the phone
-Rooted the phone by flashing magisk patched image
-Flashed Inception kernel via FK kernel manager
-Rebooting after flashing the kernel, It will get stuck in a black screen with no text whatsoever (probably a bootloop)
-Installed TWRP (This time TWRP does not show encrypted letters), Wiped all data, Transferred the custom ROM zip to the phone (while in TWRP) and flashing the rom
-The rom is flashed successfully. On the first reboot you get greeted with another bootloop. Fortunately the phone booted into TWRP. This time the folders are encrypted again.
-Successfully wiped the data (advanced>wipe data). No errors in data wiping this time.
-A fully working Corvus OS setup appears on rebooting.
I think the whole TWRP problem was fixed by the custom kernel. Anyways I am finally done with this now. You probably enjoyed seeing all this xD
Click to expand...
Click to collapse
I like that you keep trying and finding a solution, even though you had to invest hours to make it work!
Let's hope it will work if you update the OS though – I'd actually suggest a backup of all of your data before you do an update in the future, just to be safe!
#JKTheBaskieBoy said:
I have a Redmi note 8 with MIUI 12 installed. Bootloader is unlocked and the phone is rooted.
When I try to flash TWRP recovery in fastboot mode using my PC, it successfully flashes and boots into the TWRP recovery. TWRP does not ask for any password for decrypting the files, and when I go to install>sdcard then the storage is all in random letters, completely unrecognizable.
I have tried a lot of tutorials on youtube but none of them worked. I tried flashing the latest version of TWRP, didn't work. I tried formatting all data and rebooting back into recovery mode, didn't work. (if you reboot to system after installing TWRP, the phone automatically deletes TWRP and the next time you open recovery mode you just get the default MI recovery, and you have to flash TWRP again to open TWRP recovery.) I tried almost everything on the internet but none of it worked. Is there any way I can make it ask for the decryption password? or have my files decrypted? I just need the TWRP for a one-time-use to install a custom ROM. I don't need it to be installed permanently, but no problem even if it does get installed permanently. I just want my custom ROM.
Please help
Click to expand...
Click to collapse
tell me how to turn off a smartphone with a non-working sensor?
you can still use adb push command from pc to transfer files to your phone :
adb push "nameoffile" /sdcard
(place the file in your adb folder) I was able to root a phone that had this issue using this technique.
I think u should flash dm verity becoz when i flashed the rom and flashed dm verity it worked fine