Recovery error - T-Mobile LG G2

A short time ago I installed a recovery on my cell phone, when I restart to enter the recovery, the following appears: LG G2 DemiGod Crash Handler: Critical Error. I have no experience in the world of recovery, and if they gave me a hand, I would really appreciate it. I add: the cell phone can be used perfectly, but I need to format it. Thanks for your time. Excuse the ignorance of this man.
Possibly I had errors when installing the recovery, you can ask me, maybe I had a serious error.

Same!
I'm here struggling with the same problem!

Related

[Q] Help ! Error message

Hello everybody !
I have a huge problem here with my NS, I hope you could help me : I installed this CM7 Final 3 days ago, and everything was fine until I decided to do Nandroid backup. The backup went fine, but when the phone has reboot, I had immediatly this error message : "Sorry, the process com.android.phone has suddenly stopped. thanks to try again". Abd this message appears every 3 seconds, anbd I can't do anything....plus I have no signal, no radio, no network. Another strange point is that we I reboot the phone, it never ask me to enter my PIN code .....
First thing I did was to restor my system from Rom Manager, but the same problem appeared. Then I tried to restore the system manually with the recovery, and same problem.
I don't what to do now ; the only solution I imagine now is to wipe everything and reinstall CM7 .....but I wish I could find another way...
Thanks for your kind help (and sorry for my english, I'm french).

Unfortunately, Android System has Stopped! Help Please!

Last night I decided to switch to ART from Dalvick runtime. Ever since, when android finishes loading, I get the error message "Unfortunately, Android System has Stopped." I've tried returning to stock (I'm rooted) and neither of my windows computers can see my phone which is weird because I unrooted my LG G3 recently with no problems. I've performed a hard (factory) reset numerous times. Sometimes the android system loads up OK but as soon as I reboot or power down I have the error message again. I'm at my wit's end. I can't return the phone because it's still rooted and I can't get it to work. When it boots, the LG screen appears normally. The At&t screen appears normally. Please help! I'm desperate.
If you're okay with losing info, give this a shot. I'm not sure exactly why it's doing this unless you had xposed framework before. Anyway, follow the steps and it should fix it. I'm not sure if you've tried going into the boot loader yet and doing a factory reset through there. So you can try whatever you like
http://forum.xda-developers.com/showthread.php?t=2785089
I can't get a computer to recognize the phone. I have tried a hard reset and I still get the error message. Any other ideas?
I had the same issue after I tinkered with something I shouldn't have tinkered with. I think I installed GravityBox, didn't like what it did, tried to factory reset, and started getting the Android System error consistently.
That link mcnick posted will serve you well. I would however use this thread since it's tailor made for the AT&T variant.
http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827

[Completed] [Q] I think im soft bricked? HTC Inspire 4g/DHD

I bought a used HTC Inspire 4g/DHD and it had already been flashed with "Jellytime." Thats all I really know. I know the basics of flashing and such. But here is the problem. Everything seemed in order, so i gave the phone to a friend to use, and then it started having a ton of issues. Video would go all wonky in landscape mode, phone would lock up, become unresponsive etc. So i attempted a factory restore via the boot menu and clockworkmod. Everything seemed to be going all good, then suddenly it gave me 2 errors saying it could not find and could not mount recovery files.
I thought, okay, weird, and let the phone finish doing what it is doing and restarted. It took probably 5-6 minutes after the restart and i finally got to the first screen to setup android (select language) and got a slew of pop up error messages saying XXX app has crashed or is not responding or that files were missing. and would not let me progress past that first screen. Now the phone will not even boot past the "jellytime" logo. (HTC logo flashes first, then jellytime animation and just stays there).
So i am at a loss as to what to do next because i cant get into android to enable USB debugging to use whatever process to reflash a suitable ROM. My friend really needs a phone back so a prompt response would be appreciated.
-Jason
KobaltPanther said:
I bought a used HTC Inspire 4g/DHD and it had already been flashed with "Jellytime." Thats all I really know. I know the basics of flashing and such. But here is the problem. Everything seemed in order, so i gave the phone to a friend to use, and then it started having a ton of issues. Video would go all wonky in landscape mode, phone would lock up, become unresponsive etc. So i attempted a factory restore via the boot menu and clockworkmod. Everything seemed to be going all good, then suddenly it gave me 2 errors saying it could not find and could not mount recovery files.
I thought, okay, weird, and let the phone finish doing what it is doing and restarted. It took probably 5-6 minutes after the restart and i finally got to the first screen to setup android (select language) and got a slew of pop up error messages saying XXX app has crashed or is not responding or that files were missing. and would not let me progress past that first screen. Now the phone will not even boot past the "jellytime" logo. (HTC logo flashes first, then jellytime animation and just stays there).
So i am at a loss as to what to do next because i cant get into android to enable USB debugging to use whatever process to reflash a suitable ROM. My friend really needs a phone back so a prompt response would be appreciated.
-Jason
Click to expand...
Click to collapse
Maybe you have to re-flash the whole ROM. Startig freshly (with a factory reset / wipe data) is recommended.
And don't give the device to this friend again
If you have further questions, please ask in the Inspire 4G Q&A, Help & Troubleshooting forum.
Good luck !
It_ler said:
Maybe you have to re-flash the whole ROM. Startig freshly (with a factory reset / wipe data) is recommended.
And don't give the device to this friend again
If you have further questions, please ask in the Inspire 4G Q&A, Help & Troubleshooting forum.
Good luck !
Click to expand...
Click to collapse
I posted over in the other forum. But my issue is that I cannot do the factory restore and data wipe. It will not complete. It give me a missing recovery file error. And it can't mount the missing recovery files. It is why I am so stuck.
KobaltPanther said:
I posted over in the other forum. But my issue is that I cannot do the factory restore and data wipe. It will not complete. It give me a missing recovery file error. And it can't mount the missing recovery files. It is why I am so stuck.
Click to expand...
Click to collapse
As I can see, you have already posted your question in the Q&A forum ([Q] soft bricked or screwed?).
So now you have to be patient and wait for someone to answer there.
Thanks for your understanding. Thread closed.

Can't boot into recovery - Galaxy S7 G930

Hello all.
I'm new to modifying my android (Galaxy S7 G930A) and could use some help. I have successfully rooted my phone, but have had some issues trying to flash a custom recovery. I was trying to flash TWRP but for some reason it didn't work, and I would always boot into the stock recovery.
Today, I screwed something up while trying to figure out my host of issues (I was also trying to figure out why I kept getting a "dm-verity verification failed" notice when flashing). Using the TWRP Manager app, I tried to install the recovery that way and it kept giving me an error that it was either already installed or encountered an issue of some kind. Knowing it wasn't installed, I looked for a different route. Long story short, I downloaded Flashify and then manually downloaded and flashed the TWRP recovery img and a "no-verity-opt-encrypt" file - which I read would fix the dm-verity error I was receiving.
I believe that's all I did before this recovery boot issue starting occurring.
Now, when attempting to boot into recovery (no matter what way, through an app, manually, etc) the blue text "Recovery Booting..." appears for half a second and then disappears. If I'm holding down the buttons it will flash again and disappear again, over and over. If I don't hold down the buttons, when it disappears the phone boots up as normal. So now I can't seem to access recovery at all. I wanted to try going the hard/factory reset route, but obviously can't because I can't access recovery.
Also, I don't know if this is related or not, but now my laptop will not recognize my phone at all. Doesn't give me any options - it will charge, but no connection. I was hoping to load it into Odin and do a stock reset to start from scratch before flashing a custom ROM.
Edit: I tested and connected to a different computer just fine, so there's obviously some miscommunication going on between my phone and laptop.
Can anyone help me out here? Sorry for the long post, I'm just really frustrated. :crying:

MI MIX2 S Bootloop after installing an MIUI12 Update

Good day.
It is my first time joining such a forum. Been scouring the internet for solutions.
My MI MIX2 S is currently on a bootloop. It will show the MIUI logo (pink), then will proceed to my actual phone background, the will freeze, then will restart. It will do this until the battery runs out. This happened after I proceeded with the MIUI 12 update. The last thing I remember was after installing the update, there was a message about the file being corrupted (unfortunately I was not able to fully comprehend the message as I was at work). Then the phone rebooted. Now we're here.
Things I've tried:
- hard reset, then wipe all. Result: no change in behavior
- Flashing using fastboot and the following builds: polaris_global_images_V12.0.1.0.QDGMIXM_20200816.0000.00_10.0_global, and chiron_global_images_V12.0.1.0.PDEMIXM_20200925.0000.00_9.0_global_7108ed52f4 ; Result: error: missmatching image and device
I hope I can get leads- any leads. It is a holiday the following days in where I am, and I'm trying to figure out if I can do this on my own since traveling to the repair store is restricted because of the pandemic.
Much gratitude.
SOLVED:
I found a way to send it to repair. It seems that the patch was corrupted. Phone was reverted to factory state.
theGrumpy_Geek said:
Good day.
It is my first time joining such a forum. Been scouring the internet for solutions.
My MI MIX2 S is currently on a bootloop. It will show the MIUI logo (pink), then will proceed to my actual phone background, the will freeze, then will restart. It will do this until the battery runs out. This happened after I proceeded with the MIUI 12 update. The last thing I remember was after installing the update, there was a message about the file being corrupted (unfortunately I was not able to fully comprehend the message as I was at work). Then the phone rebooted. Now we're here.
Things I've tried:
- hard reset, then wipe all. Result: no change in behavior
- Flashing using fastboot and the following builds: polaris_global_images_V12.0.1.0.QDGMIXM_20200816.0000.00_10.0_global, and chiron_global_images_V12.0.1.0.PDEMIXM_20200925.0000.00_9.0_global_7108ed52f4 ; Result: error: missmatching image and device
I hope I can get leads- any leads. It is a holiday the following days in where I am, and I'm trying to figure out if I can do this on my own since traveling to the repair store is restricted because of the pandemic.
Much gratitude.
Click to expand...
Click to collapse

Categories

Resources