Database Info

Vivo Xshot (Info, Downgrade, Root, TWRP, ROMs....)

Vivo Xshot​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specs
5.2" 1080p display
16GB/32GB Storage + Micro SD up to 200 GB
Qualcomm MSM8974AA/AC Snapdragon 801
2GB/3GB RAM
2600 mAh battery
Back Camera - 13MP OIS with 6 lenses and F1.8 aperture with Dual flash
Front Camera - 8MP front LED flash
Hi-Fi DAC chip CS4398, Headphone Amplifier chip MX97220 and an ADC chip TLV320.
GSM / HSPA / LTE
2G bands GSM 850 / 900 / 1800 / 1900
3G bands HSDPA 850 / 900 / 2100
4G bands LTE band 1(2100), 3(1800), 7(2600)
​
Official Stock ROMs
FunTouch 1.2 = 4.3 Jellybean
FunTouch 2.0 = 4.4 KitKat
Official Stock International ROM Zip Package
1.16 FunTouch 1.2 Zip package here
- http://www.vivoglobal.com/dl/6
- http://www.vivoglobal.com/download/4.html
2.4.1 FunTouch 1.2 Zip package here
- http://www.vivoglobal.com/dl/13
- http://www.vivoglobal.com/download/4.html
2.5.3 FunTouch 1.2 Zip package here
- http://www.vivoglobal.com/download/4.html
- http://www.vivoglobal.com/dl/18
2.5.7 FunTouch 1.2 Zip package here
- http://www.vivoglobal.com/download/4.html
- http://www.vivoglobal.com/dl/23
3.7.0 FunTouch 2.0 Zip package here
- http://www.vivoglobal.com/download/4.html
- http://www.vivoglobal.com/dl/22
Official Stock Chinese ROM Zip Package
1.16 FunTouch 1.2 zip package here
- https://yadi.sk/d/JYwKg1fte76CU
- http://pan.baidu.com/s/1bno2tOz
1.18 FunTouch 1.2 zip package here
- http://download1.vivo.com.cn/funtouch/back/vivoX710L/PD1302L_A_1.18.3.zip
6.9.7 FunTouch 2.0 Zip package here
- http://download1.vivo.com.cn/funtouch/vivoX710L/Funtouch_OS_2.0_4.4_PD1302L_A_6.9.7.zip
6.13.0 FunTouch 2.0 Zip package here
- http://www.vivo.com.cn/dl/132
How to Flash Stock Official Firmware
Make sure you have the correct Stock Recovery
Which is This Type of User Interface
Method 1 - Stock File Manager
1. Put zip package in phone root directory internal storage (IMPORTANT).
2. Open Stock file manager app. Find zip package and open it,
There are 2 option,
Update Now (left) and Cancel (right).
Press Update Now.
Wait patiently till complete.
Method 2 - Stock Recovery
1. Put zip package in phone root directory internal storage (IMPORTANT).
2. Enter recovery.
Entering the recovery mode:
- Turn off your phone.
- Hold and press the volume up key + power key together about 10 second.
- Press volume key to select Recovery Mode.
- Press Power key to enter the Recovery Mode.
3. Select Apply update from internal, depends where you put the zip package.
Look for the zip package and select it.
4. Wait patiently till setup is complete.
Downgrade to 1.16
Downgrade is for users who want v1.16 Stock FunTouch 1.2 ROM or to obtain ROOT at 1.16 Stock ROM.
International ROM - can downgrade straight to 1.16
1.16 Zip package here
- http://www.vivoglobal.com/download/4.html
- http://www.vivoglobal.com/dl/6
Chinese ROM - you have to downgrade to 1.18, then 1.16
1.18 zip package here
- http://download1.vivo.com.cn/funtouch/back/vivoX710L/PD1302L_A_1.18.3.zip
1.16 zip package here
- https://yadi.sk/d/JYwKg1fte76CU
- http://pan.baidu.com/s/1bno2tOz
How to Downgrade
Method 1 - Stock File Manager
1. Backup.
2. Factory reset.
Settings -> More settings -> restore factory settings -> Erase all content and settings -> Reset phone.
Or you can factory reset in stock recovery.
3. Put zip package in phone root directory internal storage (IMPORTANT).
4. Open Stock file manager. Find zip package and open it,
there is 2 option,
Update Now (left) and Cancel (right).
Press Update Now.
Wait patiently till complete.
Method 2 - Stock Recovery
1. Backup.
2. Factory reset.
Settings -> More settings -> restore factory settings -> Erase all content and settings -> Reset phone.
Or you can factory reset in recovery.
3. Put zip package in phone root directory internal storage (IMPORTANT).
4. Enter recovery.
Entering the recovery mode:
- Turn off your phone.
- Hold and press the volume up key + power key together about 10 second.
- Press volume key to select Recovery Mode.
- Press Power key to enter the Recovery Mode.
5. Select Apply update from internal, depends where you put the zip package.
Look for the zip package and select it.
6. Wait patiently till setup is complete.
Root Guide (1.16 REQUIRED)
USB driver link
- http://www.vivo.com.cn/dl/67
- https://drive.google.com/file/d/0B4XvRaoY0HBYZ2Y3X25BV09ITDQ/view?usp=sharing
- http://www.mediafire.com/download/a24jxjjh0awaj8t/[www.netded.com]_vivo_driver_v2.0.0.2.rar
- http://pan.baidu.com/share/link?shareid=2986361110&uk=1462801258
- http://developer.android.com/sdk/win-usb.html
1.16 can ROOT (Will work for both 1.16 International and 1.16 Chinese ROM)
Method 1 - Vroot
1. Make sure you have 1.16 ROM
2. Install USB driver on PC
3. On your phone Enable USB debugging (Open stock dialler app and dial *#*#7777#*#* and then toggle on USB debugging)
4. Download and install VRoot (PC version) http://www.mgyun.com/en/getvroot
5. Now ROOT with VROOT.
Method 2 - Towelroot
1. Download and install the application on your device towelroot.apk
2. Open towelroot, press the big button.
3. If everything is successful, after a few seconds, you see the following screen with the message that "you should have already get ROOT, a reboot is not required."
4. Exit the application, put the SuperSU Google Play.
Method 3 - KingRoot
1. Download and install the application on your device KingRoot.apk
2. Open KingRoot, tap on the ROOT button.
TWRP Recovery Guide (ROOT REQUIRED)
For Users that want to flash Custom ROM
Rashr Method
1. Download vivo_xshot_recovery bine.zip
- https://yadi.sk/d/P_sB32CvfKcwa (Direct xshot_twrp.img)
- https://drive.google.com/file/d/0B4XvRaoY0HBYMEZMYVM2OXQtSkU/view?usp=sharing
- http://www.mediafire.com/download/dus05wda5mgb0b5/vivo_xshot_recovery_bine.rar
2. Unzip and Copy xshot_twrp.img into your phone storage
3. Download and install Rashr app in Google Play Store
4. Open Rashr
5. Go to Recovery from storage and find xshot_twrp.img
6. Flash/Install it
7. Done
PC ADB Method
1. Make Sure you have Enable USB debugging and USB driver installed
2. Download vivo_xshot_recovery bine.zip
- https://drive.google.com/file/d/0B4XvRaoY0HBYMEZMYVM2OXQtSkU/view?usp=sharing
- http://www.mediafire.com/download/dus05wda5mgb0b5/vivo_xshot_recovery_bine.rar
3. Unzip vivo_xshot_recovery bine.zip
4. Find and open TWRP Recovery Flasher (Windows Batch File)
5. Plug in phone via USB
6. Press 1 and Enter on your Keyboard. (Flash TWRP Recovery)
Unlock Bootloader
This is optional. You don't need to Unlock Bootloader to flash Custom ROM at this moment. This only enable adb without ROOT, an extra method for flashing Recovery and others. [Credits to mishyf]
https://drive.google.com/file/d/0B4XvRaoY0HBYOGQ1NGpCb0s2dFU/view?usp=sharing
Flash the zip in TWRP Recovery
List of Custom ROMs (TWRP REQUIRED)
Please Backup your current ROM​MIUI
MIUI V6 (5.6.1) + ROOT
- http://en.miui.com/download-258.html
MIUI V6 (5.6.1) [Credits to Drov44]
- https://yadi.sk/d/_2jPEtuOh3d84
MIUI V7 (5.8.2)
- http://forum.xda-developers.com/sho...ers.com/showpost.php?p=62494819&postcount=393
MIUI V7 (5.10.12)
- http://en.miui.com/download-258.html
International FunTouch 1.2
International FunTouch 1.2 v1.16 (Stock Unchanged)
- https://yadi.sk/d/TpMhjTPseChAg
International FunTouch 2.0
International FunTouch 2.0 v3.7.0 (Stock Unchanged)
- http://forum.xda-developers.com/showpost.php?p=62416487&postcount=380
International FunTouch 2.0 v3.7.1 with ROOT
http://forum.xda-developers.com/showpost.php?p=63636862&postcount=617
Chinese FunTouch 2.0
FunTouch 2.0 v6.9.7 + ROOT
- http://bbs.vivo.com.cn/thread-1702668-1-4.html
FunTouch 2.0 v6.9.8 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- https://yadi.sk/d/1J3WJ3kCevdme
FunTouch 2.0 v6.10.2 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- https://yadi.sk/d/ML2lcyrBf9W25
FunTouch 2.0 v6.10.3 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- https://yadi.sk/d/cX0_ZXXGfnfcb
FunTouch 2.0 v6.10.3 + ROOT + GApps + xHiFi + MOD + RUS Language [Credits to Drov44]
- https://yadi.sk/d/CwmhzO3nfaYss
FunTouch 2.0 v6.11.1 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- https://yadi.sk/d/Jvehau3Kfq3RH
FunTouch 2.0 v6.11.1 + ROOT + GApps + xHiFi + MOD + RUS Language [Credits to Drov44]
- https://yadi.sk/d/3UALDiItfr9Sd
FunTouch 2.0 v6.12.2 + ROOT + GApps + xHiFi + MOD + RUS Language [Credits to Drov44]
- https://yadi.sk/d/9AHAaaL2h4q3i
FunTouch 2.0 v6.12.2 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- https://yadi.sk/d/J_BovpbghAesP
FunTouch 2.0 v6.13.0 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post61648498
FunTouch 2.0 v6.13.1 + ROOT + GApps + xHiFi + MOD (FOR v6.13.0 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post62074353
FunTouch 2.0 v6.13.2 + ROOT + GApps + xHiFi + MOD (FOR v6.13.1 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post62278351
FunTouch 2.0 v6.14.4 + ROOT + GApps + xHiFi + MOD (FOR v6.13.2 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post62704265
FunTouch 2.0 v6.15.2 + ROOT + GApps + xHiFi + MOD (FOR v6.14.4 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post63811696
FunTouch 2.0 v6.15.4 + ROOT + GApps + xHiFi + MOD (FOR v6.15.2 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post64768044
FunTouch 2.0 v6.15.4 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post65044406
FunTouch 2.0 v6.16.1 + ROOT + GApps + xHiFi + MOD (FOR v6.15.4 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post65663095
FunTouch 2.0 v6.16.2 + ROOT + GApps + xHiFi + MOD (FOR v6.16.1 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post65885801

Extras​
How to Install Google Play Store
For FunTouch 1.2
http://www.gizchina.com/2014/07/09/fix-google-services-vivo-xshot-vivo-xplay-3s/
For FunTouch 2.0
In your phone go to Vivo App Store.
Type Google in the search box.
Install Google Play and Google Vivo (image below)
Go to Google Vivo app.
There will be 3 green bar.
Open the 1st bar it will install/load something (image below)
Next.
Open the 3rd bar. (image below)
A Message box appear and choose the left option. (image below)
This will download the Google Play Store.apk
Once complete, download and install it.
Note: In notification bar you can install it straight away)
(Apk Location is in SD card\下载\App)
Now you have Google Play Store.
Enjoy.
Gmail Fix
For users who have "Unkown Issue With Google Play service".
Method 1
Install and run GMSCore.apk and clean data in GMail: Settings-> More settings-> Applications-> All-> Gmail-> Clear data
GMSCore.apk
Method 2
Ok, looks like many of you experience Gmail issue, since i got Gmail to work here is my full story.
After installing/flashing your Custom ROM.
Clear data/cache on Gmail.
Reinstall Gmail app in Play Store .
Freeze "Google Play services" using titanium backup.
Download APK link here and Install Google Play service 7.0.99.
Get gmail2.apk from ZIP 6.10.3/system/app or download link here
put Get gmail2.apk it with RootExplorer into /system/app.
Reboot.
Things to Freeze and Uninstall Unwanted Apps
For Freezing (Use app like Titanium Backup)
-App Store
-Browser
-Vivoice
more app to uninstall follow this link http://ssmaker.ru/49ce1965/
For Uninstall
Go to Setting -> More Setting -> Application -> Factory APP management
Uninstall most of it. Leave the GoogleCalendarSyncAdapter if you're using the calendar.
Better GPS
Link here or here.
Replace it in system/etc.
But i don't see France
There is a flashable zip for France here, you can flash this in TWRP but i would recommend extract the zip folder and find the gps.conf. Then replace it in system/etc.
Accessories
Best case that protect the Camera Lens
http://www.aliexpress.com/item/Flex...roid-Smartphone-Free-Shipping/1878209318.html
Tempered Glass
Just look for the one that have a Arc edge (2.5d) Imak, Vpower, nillkin and much more have them.
Service Code
1. * # 06 # - tried it shows IMEI
2. * # * # 001 # * # * - tried, shows the state (0 or 1) any official flags, including on the line 16 - Flag is_root = 0 or is_root = 1, ie, Was he at least once rutovan. I rutoval phone, then returned to the drain, there is no root, but is_root = 1
3. * # 558 # - I tasted 4 lines in Chinese: "Engineering mode", "Quality verification test", IMEI, "Restore factory settings", "Software information". At the entrance to each of menyushek further information is also displayed in Chinese, translated names of the items in the "Engineering mode", "Quality verification test" by means gugloperevodchika, it tests all iron components (screen, two cameras, touch screen, speaker, vibration motor, and so on .d., etc.).
4. * # * # 4838 # * # * - tried displays four lines of the menu: "Phone information", "Battery information", "Usage statistics", "WLAN information". A lot of different information menyushek many wireless interfaces, cellular, WiFi, etc. Here vary strip frequency, etc. and the like, in particular, exhibited the type of mobile network GSM, CDMA, 4G
5. * # 225 # - will show a picture with ID smartphone components
6. * # * # 305 # * # * - changes the type of the network, only works for the old firmware version 1.16.3 on new versions will cause the phone to hang
7. * # * # 7777 # * # * - "Developer Options", there is a hidden menu, and for smartphones with "normal" android too.
8. * # * # 4636 # * # * - service mode for Windows to version 1.0
9. * # * # 4838 # * # * - service mode for Windows version 1.0 after
10. * # * # 112 # * # * - BBKlog
11. * # * # 118 # * # * - hidden switch mode 3G
12. * # * # 5806 # * # * - show switch mode 3G
13. * # * # 10922768 # * # * - Audio test. Tried, it is less a test audio, and audio setting. Displays a menu of 11 rows, then did not understand.
14. * # * # 2768 # * # * - tried displays exactly the same menu as in the command line above.
15. * # 08 # - the choice of data storage location. Tried, zero reaction.
16. - * # 09 # - switch to "hot swap" SIM card
17. - * # * # 8255 # * # * - Gtalk service monitor

How to get Xposed Framework to work for 6.12.2+
Note: Only Tested on 6.13.1
alt
Download & Install the modified Xposed Installer in this link below
http://forum.xda-developers.com/android/general/vivo-xshot-info-downgrade-root-twrp-rom-t3132533/post62092081
Install the Framework (Xposed Installer -> Framework -> Install/Update)
Reboot your device
Activate your modules (Xposed Installer -> Modules -> Tick Checkbox)
After Activating Modules do a Soft Reboot (Xposed Installer -> Framework -> Soft Reboot)
Done
TWRP Recovery Version
v2.7.1.0 @ First Page - TWRP Recovery Guide heading
v2.8.5.0 @ Page 63
Flash TWRP Recovery Without ROOT and Unlock Bootloader
http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post63489653
Hard Brick Fix
http://forum.xda-developers.com/showpost.php?p=63753265&postcount=639
Update Log
6.13.0
6.13.1
6.13.2
6.14.4
6.15.2
6.15.4
6.16.1

Hello Wets. I was vivohappy on the old vivoforums.com. Glad to see that you are still helping out vivo Xshot owners.

androidcymru said:
Hello Wets. I was vivohappy on the old vivoforums.com. Glad to see that you are still helping out vivo Xshot owners.
Click to expand...
Click to collapse
Thanks.
Welcome, glad you're alive.
Incase you're wondering vivoforums got shutdown.
Anyway.
I tried the lastest 2.0 Custom ROM v6.12.2 by Bine and Drov44.
Both can flash without factory reset.
Bine's v6.12.2 Custom ROM has Gmail issue, there is a fix for that and
Viper4android works.
Drov44's v6.12.2 Custom ROM Gmail is working so as Viper4android.
I can't get Xposed Framework to work for both ROM. Not sure this can work with wipe though.
So I had to return to 6.11.1. I need that Youtube Adway and Gravity Box.

Do you know why it was shut down?
I found bine on a Russian forum, not sure where everyone else went. I was hoping it was a short term problem. It's a pity it's gone as there was a lot of useful information for the Xshot and Xplay.

androidcymru said:
Do you know why it was shut down?
Click to expand...
Click to collapse
Forum has been down for a week and counting.
I went to meizufans.eu (associated to vivoforums.com) created a account, PM the admin what had happened.
Here's the reply.
Complain at Mr.Eyckmans AKA HondaRacer. Because of his greed he refused to give it to us. Instead he tried to pull all of us over.
Click to expand...
Click to collapse
androidcymru said:
found bine on a Russian forum, not sure where everyone else went. I was hoping it was a short term problem. It's a pity it's gone as there was a lot of useful information for the Xshot and Xplay.
Click to expand...
Click to collapse
Yeah same. Lucky i saved most of my guide in a text document and Google Chrome Cached.
I already notice the RUS forum, can't seem to register.
Thailand Vivo Facebook is very active though.
So what ROM are you current using?

I'm still using 1.16.2. I am happy with the stability, all camera controls work as they should, too many complaints on the Chinese forums about deterioration in photo quality and the hard controls not working with zoom etc.
Also complaints about battery life was another factor for holding off.
Xposed framework is installed and all the modules are working. GPS is spot on, cell location works 100%, Google Playstore and services update without problems.
With Funtouch so heavily skinned, I see little point at this time to upgrade to Kitkat.
I did install Nova Launcher early on in my purchase, but saw no real gains in speed, and missed the layout and benefits of funtouch.
My wife has Lollipop on her Nexus 5,and having had a play with it, I don't think I'm missing out.
I will keep coming back to this thread as I may update when it looks like it's really worth it

WetsHD said:
Forum has been down for a week and counting.
I went to meizufans.eu (associated to vivoforums.com) created a account, PM the admin what had happened.
Here's the reply.
Yeah same. Lucky i saved most of my guide in a text document and Google Chrome Cached.
I already notice the RUS forum, can't seem to register.
Thailand Vivo Facebook is very active though.
So what ROM are you current using?
Click to expand...
Click to collapse
Hi Wets,
Glad to found you here with the Xshot thread with you. Miss the Vivoforums. Anyway all is well now as I know you will keep this thread alive. Anything worth having in the new update (2.0 6.12.2)? Would like to have a crack on that MIUI Rom V6 as I have it in my MI2 but hate to flash & back if not that smooth as I'm expecting. Hope some people (Vivoforums members), will find this thread and can share their experience.

androidcymru said:
I'm still using 1.16.2. I am happy with the stability, all camera controls work as they should, too many complaints on the Chinese forums about deterioration in photo quality and the hard controls not working with zoom etc.
Also complaints about battery life was another factor for holding off.
Xposed framework is installed and all the modules are working. GPS is spot on, cell location works 100%, Google Playstore and services update without problems.
With Funtouch so heavily skinned, I see little point at this time to upgrade to Kitkat.
I did install Nova Launcher early on in my purchase, but saw no real gains in speed, and missed the layout and benefits of funtouch.
My wife has Lollipop on her Nexus 5,and having had a play with it, I don't think I'm missing out.
I will keep coming back to this thread as I may update when it looks like it's really worth it
Click to expand...
Click to collapse
I don't know.
I'm on bine FunTouch 2.0 6.11.1 with a bit of modification like disable unwanted app, GPS fix and Gmail fix if you have. It's sufficient enough.
I find the GPS and Camera are working quite flawless but i'm no expert. The battery Screen On Time on FunTouch 2.0 is better than 1.2 in my opinion. I get 1 extra hour of Screen On Time.
For Nova launcher, i need the 5x5 home screen and the app drawer. Thus all my phone have Nova Launcher.
Agreed on the Lollipop. i tried CM 12.1, some of the feature is already featured in FunTouch 2.0.
yannis07 said:
Hi Wets,
Glad to found you here with the Xshot thread with you. Miss the Vivoforums. Anyway all is well now as I know you will keep this thread alive. Anything worth having in the new update (2.0 6.12.2)? Would like to have a crack on that MIUI Rom V6 as I have it in my MI2 but hate to flash & back if not that smooth as I'm expecting. Hope some people (Vivoforums members), will find this thread and can share their experience.
Click to expand...
Click to collapse
Thanks, I'm just one person. It will be grateful to share any information for the Xshot.
For 2.0 6.12.2 update, i think it's minor so nothing interesting. I can't seem to install Xposed Framework on any Custom ROM running 2.0 6.12.2, so i decided to fall back to 6.11.1.
I'm in the same boat as you, just to lazy to flash MIUI ROM since you have to Factory Reset. Could Backup APPS only in TWRP Recovery and restore it but i never tried it.

I'm glad to know that we have this thread in xda. I didn't get any update and information for the last 4 month after vivoforum been shutdown. I just want to know if is it true that vivo xshot got lollipop custom rom? Here's the link http://newblogphonereviews.blogspot.com/2015/03/working-tutorial-how-to-updateupgrade_96.html?m=0
The bad news is I can't get through the download link because of the survey ads something like that. Hope someone can give some good news that we can update or upgrade to lollipop. I really want to have lollipop run on our device. Looking forward to know further information. Thanks for this useful tutorial. Keep it up buddy. Sorry for my bad english

namian_semazen said:
I'm glad to know that we have this thread in xda. I didn't get any update and information for the last 4 month after vivoforum been shutdown. I just want to know if is it true that vivo xshot got lollipop custom rom? Here's the link http://newblogphonereviews.blogspot.com/2015/03/working-tutorial-how-to-updateupgrade_96.html?m=0
The bad news is I can't get through the download link because of the survey ads something like that. Hope someone can give some good news that we can update or upgrade to lollipop. I really want to have lollipop run on our device. Looking forward to know further information. Thanks for this useful tutorial. Keep it up buddy. Sorry for my bad english
Click to expand...
Click to collapse
The website link you're providing is 100% Fake/Scam making users believe it's real.
Here's the reason.
- All duplicate content and put "device name"
- Putting ad survey means another red flag
- The comments are duplicate
Lollipop is still in progress i believe, just enjoy your current version you won't miss anything.
If you want to check any Lollipop update, Go to your OTA (Setting -> System Update) or Go to the Official Chinese Vivo Forum " http://bbs.vivo.com.cn/forum-138-1.html " to see any indication of Lollipop.
Thanks, will keep this Thread up-to date as possible.
Any ways Welcome.

I've rooted my xshot. I try to update to rev 2.5.3, but after the download completed and I try to install it, it say need to boot into recovery mod (stock recovery). But when I boot to recovery mod there's nothing to install. Then I reboot to see if anything goes wrong, it just show the notification that my xshot got new update, need to download it again. I tried several time to update but still the same. So I decided want to flash any stable custom rom. So any suggestions? Which one I should try? V6.11 or V6.12? If I flash one of these rom can I just flash it without wipe data/factory reset? Can you please attached more screenshot?

namian_semazen said:
I've rooted my xshot. I try to update to rev 2.5.3, but after the download completed and I try to install it, it say need to boot into recovery mod (stock recovery). But when I boot to recovery mod there's nothing to install. Then I reboot to see if anything goes wrong, it just show the notification that my xshot got new update, need to download it again. I tried several time to update but still the same. So I decided want to flash any stable custom rom. So any suggestions? Which one I should try? V6.11 or V6.12? If I flash one of these rom can I just flash it without wipe data/factory reset? Can you please attached more screenshot?
Click to expand...
Click to collapse
All version are stable, but some have Gmail issue there is a fix for that but require extra time and cannot install Xposed Framework etc.
Bine 6.10.3 - No issue.
Drov44 6.10.3 - I haven't tried it, should be ok.
Bine 6.11.1 - Has Gmail issue.
Drov44 6.11.1 - No issue according to users.
Bine 6.12.2 - Has Gmail Issue and Can't install Xposed Framework.
Drov44 6.12.2 - Can't install Xposed Framework.
You MUST Wipe/Factory Reset if you are coming from any Chinese and International FunTouch 1.2
If you're on Any Chinese 2.0 Custom ROM if can flash with NO Wipe/Factory Reset. Example are you're on FunTouch 2.0 v6.9.7 Custom ROM, it can Flash 6.9.8, 6.10.3, 6.11.1, 6.12.2 with no Wipe/Factory reset but if you are experiencing problem if might have to factory reset.

FunTouch 1.2 based on 4.4 kitkat (Credits to andrejchern)
source
Download Link - https://yadi.sk/d/L_ZtSbbRhM4dG
How to Install
Installation via a custom recovery (TWRP, CWM) do a reset, clean the dalvik cache and select the zip on внутренней(внеш.sd map) install, reboot the system.
Changes
Firmware based on flow FT OS android 1.2 4.4 KitKat. Changes: not all cut Russified right Russian users, changed the font. Added: keyboard, apps from Google (Play Market, Youtube, Gmail, Maps)
Problem
Bugs: Flight memory information in the Russian language, perhaps the video (not tried) when selecting settings. When you enable the geolocation from Google, location is switched on and off. through the settings of Google.

Just downloaded international 1.16. Flash it without factory reset, installation aborted. Try with different recovery, still the same. Need to unroot first so I can update. I have touch distortion issue for awhile and I don't know how to get rid of it, little bit slow to respond when typing. How can I unroot back so I can update to rev 2.5.3? It would be more cool if we have pure cm12 rom without funtouch. Hope somebody can provide it for us xshot user.

namian_semazen said:
Just downloaded international 1.16. Flash it without factory reset, installation aborted. Try with different recovery, still the same. Need to unroot first so I can update. I have touch distortion issue for awhile and I don't know how to get rid of it, little bit slow to respond when typing. How can I unroot back so I can update to rev 2.5.3? It would be more cool if we have pure cm12 rom without funtouch. Hope somebody can provide it for us xshot user.
Click to expand...
Click to collapse
I never have touch distortion issue, probably use a different keyboard might solve it.
I'm really confused of your situation. Just answer those question below might help.
What current ROM you're using right now?
Is your device Rooted?
What current Recovery do you have?
What's the desire ROM you want to flash/install?

Yes I rooted my device using towelroot.apk,
I used twrp,
My desire rom is cm rom that have cm function like my old s4, they used to have plenty of rom that based on cm.
Let us forget about it. Now this is my current situation.
I flashed funtouch OS 2.0 6.12.2rus. I love the new ui.
The problem is...
Battery drain too fast,
Cannot use other launcher,
Can't detect flashdrive,
Didn't have option to select 3g only,
Others work perfectly. By the way, about my touch distortion it is because I used my powerbank damaged USB cable. I tried with other cable and it's working, but when I unplug the cable, the distortion still there. Thanks again for providing this thread buddy ?
Hopefully they solve the battery drain problem for the future update.

Did you Root your phone at 1.16 using Towelroot.apk?
For Battery life
You just flash a ROM recently, probably need to wait couple of days to judge the battery life. Does the battery drain by standby?
To change launcher
Go to Imanager -> App mgt -> Default App Setting -> The Default Desktop -> Now select your Launcher
I can connect a 8GB flashdrive using OTG cable working fine.
And 1TB Portable Hard Drive using the OTG Y cable it needs power though so i plug one of the Y cable in to a Power-bank. Working fine.
To connect 3g only is to go to Setting -> Mobile Network -> Network Mode -> Select 3G(pref)/2G
I can't comment about the Touch Distortion issue, never experience this before.
Hope this will help.

I found that Vivo Xshot is a good phone but less support even in Vivo chinese forum

[ROM][UNOFFICIAL][6.0.1][E6853/E6803] CyanogenMod 13 for Xperia Z5 Premium [ALPHA]

[ROM][UNOFFICIAL][6.0.1][E6853/E6803] CyanogenMod 13 for the Sony Xperia Z5 Premium [ALPHA]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 13 for the Sony Xperia Z5 E6853 and E6803​
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase
performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be
used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps).
CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Before you start
This ROM is only for the E6853 and the E6803
Code:
*
* Your warranty may be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
Special Thanks
@CTXz for getting the ball rolling on CyanogenMod for Z5 series and stemming the lion's share to get this working
@oshmoun for providing fixes ASAP
@AndroPlus for providing a great kernel that works with many recoveries
@moonbutt74 for reminding me that smashing your device can provide a solution
@sub77 for teaching me how to work with QCOM (I was on exynos before)
@Joeisgood99 for providing a solid working TWRP-3.0.0.0 build until we had our own
@bazhip for providing a well working twrp 2.8.7.0 for restoring until we had our own
@alphatact1cs has a great overview on lots of topics for the Z5 device family
@auras76 for his great Custom ROM
@infected_ for his experience
Thanks to @mpro420 for help to get Viper4Android working !
Thanks to @jimRnor for Project DiVA SoundMod !
The Sonyxperiadev team for releasing their sources to the public
SonyAOSP team
SonyCM team
Sony Xperia (community) devs
And ofcourse the entire CyanogenMod team!
(Known) Issues
Video Recording
Bluetooth (keeps restarting) (might be fixed, needs feedback + testing)
Camera Colors (can be circumvented by using specific apps CameraNext Mod )
Camera Focus & Sharpness (driver issue, probably since it uses Xperia Z (original) drivers but different lenses ?)
Camera lowlight pictures (might improve with release of Sony's "Experimental AOSP Camera" for the Z5 series, porting of other Framework + Stock Cam app; partially needs DRM magic)
Camera Focus (even with VCM2 actuator changes focus is still kind of murky)
Fingerprint sensor (might work depending on build date of ROM)
Lag after booting up device (Will resolve: lock screen after boot and waiting a few seconds)
Long bootup times & less smoothness with "stock" (prebuilt) kernel
What can not be fixed, changed - aka WONTFIX - NOTOURPROBLEM
There might be potential speed issues with Class 10+ microSD cards not properly being "tuned", in that case switch to slower cards or RMA it which should hopefully solve it. There is a possibility to force slower speeds on cards but that is not really the optimal solution with ultra speed cards and needs further investigation. Samsung (EVO/EVO+) cards, Transcend cards and a few others UHS-I(+) and faster are affected.
What has been Fixed
Horizontal color lines and color glitches during bootup
Gapps
Sudden Lag after some time
NFC
Odd calling numbers
In-call mic
Sound on calls
Camera button
Microphone
Thermal regulation
Red flashy frames
RIL (SIM detection)
Dex pre-optimization
Camera
Sensors
Crash after locking device
microSD access
Flash light / Torch
Full brightness (should be fully working)
Gapps (permissions issues) [occurs occasionally and should be circumvented by full-wipe approach (incl. internal storage)
Hang/Loop during boot stage (should be circumvented by full-wipe approach (incl. internal storage)) (use Custom Kernel, under investigation)
High battery drain [~ 10%-20% per hour] when dirty-flashing system (fastboot -S 256M flash system system.img), make sure to have data backed up, then format /data ; OTA updates should be fine though [need feedback] ); causes are: dirty flashing, certain apps, ROM issues, etc.
Guides/Instructions
Unlocking Bootloader
Warning! The following procedure may void your warranty and will wipe EVERYTHING
Visit Sonys Official Bootloader Unlock guide (Details to all the risks you are taking are located on their site)
After Unlocking your bootloader you can proceed with the next steps
Steps on how to Fastboot, Flashmode, Recovery, Emergency/Force Poweroff
@alphatact1cs has a great overview on lots of topics for the Z5 device family
over at [GUIDE] Sony Xperia Z5 - UNLOCK / ROOT / TWEAKS - OS 5.1.1 / 6.0
There go to the [GUIDE] StockROM section , open it up and under #GENERAL you'll find everything you need to know.
Setting up fastboot and how to use it
For windows users
Please checkout this guide on how to use fastboot on windows
If you prefer to keep a low footprint instead of installing the whole Android SDK, take a look at its thread
[TOOL]Minimal ADB and Fastboot [8-28-15]
For Linux users
Installation
Debian based distros (Debian, Ubuntu etc.)
Open a terminal and enter the following :
Code:
sudo apt-get update && sudo apt-get install android-tools*
Confirm the installation by either hitting enter or typing y
Gentoo based Distros (Gentoo, Funtoo, Sabayon, Scientific Linux)
Once you're in a terminal, enter the following:
Code:
emerge dev-util/android-sdk-update-manager
Other distros (Arch, Fedora, Open Suse etc.)
Please find the apropriate packages to install android fastboot tools for your distro
How to use
Open a terminal in the location your .img file is located or cd into that directory like this:
Code:
cd <path to your directory that contains the .img files>
Replace <path to your directory that contains the .img files> with your actuall path
To boot temporarely into a .img (ex recovery) use the following command (replace <your.img> with your .img file) :
Code:
fastboot boot <yourfile>.img
To flash a kernel image enter the following (replace <your.img> with your .img file):
Code:
fastboot flash boot <your.img>
To flash a recovery image enter the following (replace <your.img> with your .img file):
Code:
fastboot flash recovery <your.img>
To exit fastboot enter :
Code:
fastboot reboot
How to install CM 13
Above all - do a Backup of ALL your data
When I write ALL I mean ALL (this includes the data on your micro SD card,
don't come whining to me if you lose your wedding photos/videos, kids' photos/videos or other important stuff !
For optimal experience I'd recommend my built custom kernel (quicker boot times, higher reliability, more tweakability)
General, in-depth instructions (for the Xperia Z5 !)
Download one of the newer Z5 AndroPlusKernels v20+ by @AndroPlus from his official website (Scroll down and select Z5, then on AndroidFileHost search for Z5_AndroPlusKernel_Permissive_v2 (v20 - v23) and download it)
Extract the flashable zip-file e.g. Z5_AndroPlusKernel_Permissive_v23.zip
Download our TWRP 3.0.1-0 build for the Z5)
Download the appropriate gapps from below (Can be downloaded on your device)
Download the CM 13 Zip for the Z5 from below (Can be downloaded on your device)
Move the GAPPS zip and the CM 13 to your Z5 if you haven't downloaded them on your device
Power Off your Z5 and wait about 10-15 seconds to make sure it's off
To enter fastboot mode hold VOL UP and while holding VOL UP connect your device to your pc via cable
When the notification LED has turned blue you are in fastboot mode
On your PC flash the boot.img that has been extracted from the Z5_AndroPlusKernel_Permissive_v23.zip using fastboot (
Code:
fastboot flash boot boot.img
)
Now flash twrp-3.0.1-0-E6653-20160403.img by using fastboot (
Code:
fastboot flash recovery twrp-3.0.1-0-E6653-20160403.img
)
Once both of those images have been flashed you can reboot the device like so:
Code:
fastboot reboot
Quickly pull the usb cable from the computer (you can leave the other end in the phone's port)
When booting up wait for the notification light to turn yellow at the Sony logo
Once it has turned yellow, you will enter TWRP by pressing VOL UP (or VOL DOWN - up works more reliably)
If you've missed the step above, reboot your device and try the step above again
Alternatively you can force turn off the device via: Power Button + Volume Up , then turn it on again via Power Button
If TWRP asks you to enable read and write, swipe to continue
Go to settings and lower the max brightness to the minimum or one of the lower levels to preserve energy
In TWRP make a full backup to the microSD in case you want to revert back to stock.
After it has finished, in this case Reboot -> System.
Copy over the TWRP folder from the external microSD to your computer (reason: you might not have access to your external SD or have to reformat it
Thank Microsoft, Sony, etc. for that: "Stock" ROM uses texfat , AOSP, CM, etc. uses exfat, ext4, ntfs
The files on the microSD might get corrupted (filesystem problem) or the microSD going crazy (I already had both cases)
Now Power on your phone and follow the steps again to get into TWRP
Swipe to continue (?)
select Wipe > Advanced Wipe
Now ONLY tick Dalvik/ART cache, System, Cache and Data
WARNING! THE NEXT STEP WILL WIPE YOUR SYSTEM AND DATA, MEANING YOU WILL DELETE YOUR STOCK SONY SYSTEM AND ALL YOUR APPS
(You already DID a Backup of your files so nothing to worry about)
Once you've ticked the correct boxes, swipe to wipe
Once the wipe is complete, return to the main menu and select Install
Locate and select your CM 13 Zip
Select "Add more Zips" and add your GAPPS package and finally swipe to install
Once the installation succeeded you can select "Reboot System"
Wait for CM 13 to boot up (Can take several minutes)
Enjoy CM13
OPTIONAL: You can remove your TWRP backup that is located in the TWRP folder if you feel like you will no longer need it
How to ROOT
In CM 13, enable the developer options
Select Root access
Select Apps Only (Or Apps and ADB if you use ADB)
Done
How to disable the Thermal Manager
Before we start I want to set a few questions and warnings. Disabling the thermal manager will cause you device to run slightly hotter, do this at your own risk.
Let's start out with why you would want to disable the thermal manager. At this point it's not recommended to disable the thermal manager as it has been fixed. However some people still want the max performance out of their device. The average heat without the thermal manager will be roughly the same, if not less compared to the stock ROM with it's thermal manager enabled.
So why is the thermal manager even included if it the device runs mostly fine without it. As most of you already know, the Snapdragon 810 (MSM8994) has overheating problems. The first CM boot after flash is responsible for optimizing apps and android and can become extremely resource hungry at that point. Due to that, the device can heat tremendously! Not only can that cause a panic reboot but it can also damage your device in rare cases. To avoid that issue a thermal manager shrinks down process and slowers the boot animation (That's why the CM logo may lag at first boot).
Enough said, let's get going..
To disable the thermal manager you must do the following :
First enable root access (See "How to ROOT" guide)
Open the CM file manager
Go to settings > General Settings > Access Mode
Select root acess mode
Go back to the file manager
Swipe from left to right or press the menu button in the upper left corner
Select Root folder
Open the folder/directory called etc
Delete thermanger.xml
Reboot
Done
How return back to stock via TWRP backup
Reboot your device
Wait for the notification light to turn purple at the Sony logo
Once it has turned purple, you will enter TWRP by pressing VOL UP or VOL DOWN
If you've missed the step above reboot and try again
If TWRP will ask you to enable read and write, swipe to continue
In TWRP select restore and select your backup, then swipe to restore
Once the restore is done you can select "Reboot System"
If your device hangs at the Sony wave boot animation, force shut down and power your device up again.
Downloads
Latest recommended CyanogenMod release for the Sony Xperia Z5 E6853/E6803 :
6.0.1_13.0-20160627-UNOFFICIAL-satsuki_r46_alternate
Latest recommended Kernel for the CM release for the Sony Xperia Z5 E6853/E6803 :
6.0.1_13.0-20160627-UNOFFICIAL-satsuki_r46_alternate
All my releases can be found here on : Android File Host
TWRP for CM/AOSP-based ROMs:
E68XX_TWRP3_SD_recovery.img
Gapps (Select ARM64 > 6.0) :
Open Gapps
[GAPPS][6.0/5.1/5.0][arm/arm64] Official Slim GApps ( recommended )
XPosed for Android:
[OFFICIAL] Xposed for Lollipop/Marshmallow (Installer in Thread)
XPosed Releases
SuperSU in SystemMode:
SuperSU in System-Mode [v2.65-STABLE] [v2.68-BETA] [v2.70-WIP/BETA-RC]
Sound MODs:
[Sound Mod ][Project DiVA][6.0 MM_Z5 series] KitaKami sound mod Prototype 01 (any effect ?)
A.R.I.S.E. Sound Systems - Auditory Research in Sound Enhancement - Exodus RC8.3 (works (RC8.3))
[SOUNDMOD][JB/KK/LP/MM]Project Yume Final, You are the Legend (needs testing)
[SUPER MOD][4.4+/6.0/N][ v7.5.2 ] XTREMEMusic™ THE SOUND THAT YOU'VE NEVER HEARD! (NOT working (7.4), needs testing of 7.5*
[Audio Mod] eXtremeBeats Aural Maximizer (needs testing)
[APP]Material ViPER4Android 2.4.0.1[Light/Dark][LP/MM]
mpro420 said:
1.)zip file install via twrp.
2.)reboot to system.
3.)enable v4a "write to sdcard" permission in setting/apps/viper4android/permission.
4.)open v4a and gain root permission.
5.)install driver for v4a.
6.)reboot system.
7.)[emoji39]
Click to expand...
Click to collapse
Questions and bug reporting
The following questions will be ignored
Inappropriate questions
Requests for other devices
Forced orders, EX. : "PLS FIX!!!!!!"
ETA's
Often repeated questions or requests usually by the same user
Requests that are out of CM's framework (Ex. Adding Sony Apps)
How to report a bug/issue
Explain exactly what happens
Mention a log if you can (Please use hastebin or any other paste site to keep the thread clean)
If you can't mention a log, explain as precise as possible when, why and where it occurs!
Source Code
All Source Code can be obtained from:
https://github.com/Sony-Kitakami
https://github.com/SonyAosp
https://github.com/sonyxperiadev
https://github.com/CyanogenMod
https://github.com/zachariasmaladroit/android_kernel_sony_msm8994_kitakami_r2
Kernel Source code can be obtained from : zachariasmaladroit/android_kernel_sony_msm8994_kitakami_r2
We gladly accept any developers that are willing to contribute to this project! Please PM @CTXz if you are interested in joining this project!
Build from Source
http://forum.xda-developers.com/xperia-z5/general/guide-build-cm13-source-z5-z5c-z5p-t3357040
Screen Shots (Z5 compact)
XDA:DevDB Information
CyanogenMod 13 for the Sony Xperia Z5 E6853 and E6803, ROM for the Sony Xperia Z5 Premium
Contributors
CTXz, Moonbutt74 , zacharias.maladroit , oshmoun , infected_
Source Code:
https://github.com/Sony-Kitakami
https://github.com/SonyAosp
https://github.com/sonyxperiadev
https://github.com/CyanogenMod
https://github.com/zachariasmaladroit/android_kernel_sony_msm8994_kitakami_r2
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: 6.0 Recommended
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2016-04-11
Last Updated 2016-06-28

one

two

three

Previous ("legacy") threads,
by moonbutt74:
CM13 Z5P E6853 Beta -- Updated NegaSpork
[Rootable Kernel/ TWRP 3 - E6833/E6853/E6883 Marshsmellow ] [32.1.A.1.163] AU]

ok running cm13 on my 6385 and ran it for 5 mins and very happy will see about battery drain later hope there is very little, i have tried the cameras and they both show a blue picture any ideas?

dominicstg2 said:
ok running cm13 on my 6385 and ran it for 5 mins and very happy will see about battery drain later hope there is very little, i have tried the cameras and they both show a blue picture any ideas?
Click to expand...
Click to collapse
there is very little battery drain compared to Sony Stock ROMs,
It's a limitation in the preview of the camera, you tried to take a picture ? That also isn't very great but better
Use Camera Next Mod ( https://www.androidfilehost.com/?w=files&flid=53956 ) for improvement,
until Alin releases calibrated firmware blobs for the cam the picture will be non-focused and/or blurry for objects farer away than 60 cm
@dominicstg2 Weren't you one of those RR (Resurrection Remix) lovers ?

zacharias.maladroit said:
there is very little battery drain compared to Sony Stock ROMs,
It's a limitation in the preview of the camera, you tried to take a picture ? That also isn't very great but better
Use Camera Next Mod ( https://www.androidfilehost.com/?w=files&flid=53956 ) for improvement,
until Alin releases calibrated firmware blobs for the cam the picture will be non-focused and/or blurry for objects farer away than 60 cm
@dominicstg2 Weren't you one of those RR (Resurrection Remix) lovers ?
Click to expand...
Click to collapse
yes i was one who used the rr also i cant flash the rom on 6.0,1 was coming from stock, tried wiped everything and didnt work it said rom is for our device but said my device is . i had to flash android l to flash the rom any idea? not abig deal because im rocking cm13 also i dont see a drain at all on stock over night would see 5% drop on cm13 not a single % dropped and on rr when i used camera next mod the photo would be fine but on cm13 the camera is still blue when i take a picture? also im very happy that mms works and data its basically daily drivable for me

dominicstg2 said:
yes i was one who used the rr also i cant flash the rom on 6.0,1 was coming from stock, tried wiped everything and didnt work it said rom is for our device but said my device is . i had to flash android l to flash the rom any idea? not abig deal because im rocking cm13 also i dont see a drain at all on stock over night would see 5% drop on cm13 not a single % dropped and on rr when i used camera next mod the photo would be fine but on cm13 the camera is still blue when i take a picture? also im very happy that mms works and data its basically daily drivable for me
Click to expand...
Click to collapse
Was that when I uploaded the first build of RR ?
Cause I hope that this time you have more luck with it and it works:
http://forum.xda-developers.com/showpost.php?p=67538514&postcount=45
Is the taken picture now fine with Camera Next Mod and CM13 ?
Both RR and CM13 now should be pretty close, please give RR another try
Thanks

yes i think it was if not the second build , whats more stable rr or cm13? i had some issues with rr ie 4g didnt alway connect nor did 3g and no the photo is still blue on camera next mod on cm13 and sure il will download it now also can you explain why when i was onn 6.0.1 i couldnt flash cm13 nor rr? it would say its for our device but my device is . and i would have to go back to 6.0 to flash?
zacharias.maladroit said:
Was that when I uploaded the first build of RR ?
Cause I hope that this time you have more luck with it and it works:
http://forum.xda-developers.com/showpost.php?p=67538514&postcount=45
Is the taken picture now fine with Camera Next Mod and CM13 ?
Both RR and CM13 now should be pretty close, please give RR another try
Thanks
Click to expand...
Click to collapse

dominicstg2 said:
yes i think it was if not the second build , whats more stable rr or cm13? i had some issues with rr ie 4g didnt alway connect nor did 3g and no the photo is still blue on camera next mod on cm13 and sure il will download it now also can you explain why when i was onn 6.0.1 i couldnt flash cm13 nor rr? it would say its for our device but my device is . and i would have to go back to 6.0 to flash?
Click to expand...
Click to collapse
It's related to the device string that is in the zip-file of the ROM,
if that doesn't match TWRP, it can not be flashed, unless you modify the zip-file to remove that line.
That mismatch can be made in error (something went wrong during creation, typo, etc.)
or on purpose - in that case it's not so wise to flash the wrong ROM

Oh has other people had this problem?
zacharias.maladroit said:
It's related to the device string that is in the zip-file of the ROM,
if that doesn't match TWRP, it can not be flashed, unless you modify the zip-file to remove that line.
That mismatch can be made in error (something went wrong during creation, typo, etc.)
or on purpose - in that case it's not so wise to flash the wrong ROM
Click to expand...
Click to collapse

dominicstg2 said:
Oh has other people had this problem?
Click to expand...
Click to collapse
yeah, not sure if on Z5 compact,
but certainly on Z5 Premium and Z5

waitting for 6883 ^_^
Thanks Dev.

I join the testing!

Changelog
12.07.2016 == stable/testing/UNOFFICIAL update build
upstream ROM changes 6.0.1_r56 (Android security Patchlevel: 2016-07-01 / 2016-07-05)
ADB enabled by default for better error diagnosis, ADB over WiFi disabled
fingerprint scanner might work
NFC should work again
single SIM ONLY
.
other changes: YOU tell me
.
previous custom kernel (if used) should still work + NFC too, if you encounter issues with NFC please let me know
Click to expand...
Click to collapse
Kernel Source:
https://github.com/zachariasmaladro...mi_r2/commits/Sun-Kernel_cm-13.0_III.1_5_3_cm
ROM Source:
mostly
https://github.com/SonyAosp/
https://github.com/Sony-Kitakami/
https://github.com/sonyxperiadev/
Kernel
Z5P_Sunkernel_Permissive_v13_III.1_5_3.zip
ROM
6.0.1_13.0-20160712-UNOFFICIAL-satsuki_r56
Thanks

zacharias.maladroit said:
Changelog
Kernel Source:
https://github.com/zachariasmaladro...mi_r2/commits/Sun-Kernel_cm-13.0_III.1_5_3_cm
ROM Source:
mostly
https://github.com/SonyAosp/
https://github.com/Sony-Kitakami/
https://github.com/sonyxperiadev/
Kernel
Z5P_Sunkernel_Permissive_v13_III.1_5_3.zip
ROM
6.0.1_13.0-20160712-UNOFFICIAL-satsuki_r56
Thanks
Click to expand...
Click to collapse
Hi Dev ^_^
about version cm13 for Z5P E6883, When will be released ?

Tani_bc said:
Hi Dev ^_^
about version cm13 for Z5P E6883, When will be released ?
Click to expand...
Click to collapse
Don't ask for ETAs on XDA. It is rude.
Sent from my SGP311 using XDA Labs

Tani_bc said:
Hi Dev ^_^
about version cm13 for Z5P E6883, When will be released ?
Click to expand...
Click to collapse
Work in progress,
please take a look at the CM13 thread for the Z5, will ya ?
there are several factors that influence access and working for
microSD, sim cards (both), fingerprint scanner and others

Hi. Just curious, is it possible if I use this on E6883 (Z5 Premium Dual) and flash Dual Enabler thereafter?

AOSP 7.0 Nougat for Z5 Premium DUAL

--AOSP for Xperia Z5 Premium DUAL--
Should be compatible with all Z5 Premium DUAL variants!​
Things you should know before using:
If you would like to use Android Pay, you will need to lock your bootloader since the SafetyNet API checks for an unlocked bootloader.
Features:
- Split Screen
- System UI tuner with Notification Importance
- Default App selecting that includes which voice command app you want to use as default (Google Now, Cortana, Hound, etc.)
- Extended Settings
- Toggle 8MP and 23MP mode for rear facing camera (requires reboot)
- ADB over network toggle​
I am not responsible if your phone bricks, catches fire, or explodes. You are flashing this ROM at your own risk!
-Before you flash ANY of the images, you must make sure your device is unlocked through Sony's unlock boot loader service!!
Current Bugs:
1. The rear camera doesn't always work and the orientation is wrong for the front facing camera.
2. The Fingerprint sensor doesn't work.
3. No SD Card support
4. SIM card isn't read on new updated kernel.
---------------------------------------------------------------------------------------​
How to Install the ROM:
1. Download the AOSP images: https://drive.google.com/open?id=0B6sxb_DTSRXuRjVPd2NneTFUWEE
2. Flash AOSP image to your device:
1. On your device: Connect the device to your computer in Fastboot mode, by pressing volume up while inserting the USB cable. When the device is in Fastboot mode, the LED on the device will be illuminated in blue.
2. On your computer: Go to where you downloaded the files and open a cmd screen. Then, flash the boot, system and userdata images by entering the following commands in a terminal window:
Code:
fastboot -S 256M flash boot boot.img
fastboot -S 256M flash system system.img
fastboot -S 256M flash userdata userdata.img
Note: It's not necessary to re-flash the userdata every time you flash your device, but sometimes the new software is incompatible with previous content, which might result in a device that doesn't boot. If you experience this, try to re-flash only the userdata again.
3. Disconnect your device from the computer and power it on.
First boot may take a while so please be patient!
Congrats!! You now have AOSP on your Z5 Premium Dual!
---------------------------------------------------------------------------------------​
Installing GApps:
Download which GApps you would like to use (recommended GApps are the OCT 31st GApps from OpenGApps). You can either download the zip onto your phone, or if you forget to do that - like me - then download the zip onto your computer.
Download the TWRP boot.img for Z5 Premium Dual: E6883.img (I recommend you download this where you saved the other img files you downloaded earlier!)
Plug your Phone into your PC in fastboot mode.
Open a cmd screen where you downloaded the recovery img and run this code:
Code:
fastboot flash boot E6883.img
Once that's done, unplug your phone and boot into recovery. If it asks about the system being mounted as read-only click the button that keeps the system as READ-ONLY as this doesn't affect flashable zip files.
If you downloaded your GApps zip onto your phone:
Click install zip and navigate to where you saved it and install the zip.
If you downloaded your GApps zip onto your PC:
On TWRP go to Advanced -> ADB Sideload.
On your PC go to where you downloaded the zip file and open a cmd window.
Once you do that you can run this command on your computer:
Code:
adb sideload <your GApps.zip file>
Wait until the install is finished before unplugging your phone!!
Once the installation is finished press the back button
Go to Reboot -> Bootloader
Once your phone reboots into bootloader mode, flash the boot.img that you downloaded at the start with:
Code:
fastboot flash boot boot.img
YOUR PHONE WON'T REBOOT TO THE SYSTEM IF YOU DON'T DO THIS STEP!
When the flash is finished, unplug your phone and reboot it.
Congrats!! You now have GApps installed!
XDA:DevDB Information
Z5 Premium DUAL AOSP 7.0 Nougat, ROM for the Sony Xperia Z5 Premium
Contributors
Archfeind2, Sony Developer World Mobile
Source Code: https://github.com/ZeroX25/Z5_Premium_Dual_AOSP
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP
Version Information
Status: Beta
Current Stable Version: 0.5.0
Stable Release Date: 2016-11-30
Current Beta Version: 0.6.0
Beta Release Date: 2016-12-30
Created 2016-11-16
Last Updated 2017-04-10

Bug Reporting
If you find a bug or like to help out in debugging the OS:
Check to see if the bug report is already reported under the "Bug Report" Section. If it isn't then:
- Enable developer options
- Select "Bug report shortcut"
- Press and hold the power button until the Power Menu shows up
- Select "Take Bug Report"
This will make a bug report that you can share. I suggest you share it to your email, download it onto your desktop.
Go to the "Bug Reports" Section and fill in the information required including:
What phone you're using
What build you're on
And what steps you took that created the bug so that it can be recreated.

Build 0.6.0 Changelog: (Coming Soon)
Built on AOSP 7.0 r24!
Reverted change rx8 digital audio back to 84 (was 87)
Lowered screen brightness level from 10 to 5
Removed newlabs ringtones
Camera button can now take pictures! Use power button to call upon camera.
Colors are fixed in camera; front-facing camera still rotated on 90 deg in ui
Older Version(s):
Build 0.5.0 Changelog:
Built on AOSP 7.0 r21!
Discarded some outdated ringtones, notification sounds and alarms for new (and hidden) material sounds
No need to set DPI before build. 7.0 Nougat has default support for dpi changing!
- Settings: Display for small, medium or large
OR
- Settings: Developer Options -> Drawing -> Smallest Width for a custom DPI setting!
BOOT.IMG ISSUE FIXED! boot.img needs to come from r17 only!
Increased thermal throttle threshold in device/sony/satsuki/rootdir/system/thermanager.xml by 5 deg C
Enabled KSM in:
-kernel/msm/arch/arm64/config/aosp_kitakami_satsuki_dsds_defconfig
-device/sony/kitakami/rootdir/init.kitakami.rc
Build 0.4.0 Changelog:
-Now based on AOSP 7.0 r19 (NBD91P)!
Build 0.3.1 Changelog:
-Changed BUILD_VARIANT from userdebug to user
-Changed selinux from permissive to enforcing
Build 0.3.0 Changelog:
-Changed DPI to 440 so 5 apps can be horizontal on the homescreen instead of 4 (original DPI was 480)
-Changed Speaker mixer ceiling from 84 to 90 (this should help with the maximum speaker volume)

will have a try if sd card bug fix lol

pandan80 said:
will have a try if sd card bug fix lol
Click to expand...
Click to collapse
Sound's good :good:
The xperiadev website was using an old revision of 7.0 (r17) so I'm updating the ROM now to the newest revision (r21) to see if that helps alleviate any bugs.

after flash phone blank only is normal?my devices is E6883

pandan80 said:
after flash phone blank only is normal?my devices is E6883
Click to expand...
Click to collapse
Can you re-word this please? What did you flash and did you go into the settings to disable auto brightness? You must flash boot.img, userdata.img and system.img if you are flashing for the first time.
EDIT:
I've uploaded the working boot.img file so this should fix the issue. Just run this command in the folder you downloaded it to:
Code:
fastboot flash -S 256M boot boot.img

Follow the command and flash....but on vibration only...sorry for my bad english

pandan80 said:
Follow the command and flash....but on vibration only...sorry for my bad english
Click to expand...
Click to collapse
So you're not getting any sound?
Can you tell me which files you flashed as well?
Edit:
It could be something to do with the kernel. Since we're using the first boot.img that I created (all future boot.img files didn't boot the phone up past the black screen; will have to do more testing) I can upload the new boot.img later today to see if that fixes the issue.

0.4.0 on my userexperience
wifi ok.....no reset and random
bluetooth ok....no reset and random
camera crash...only can open went boot...video record only working on 720p...no 4k option
no sd card support
ringing vibrate dual speaker ok
dual sim dual stanby ok
Fingerprint sensor doesn't work
quick charge 2.0 is working

thanks for the update :good:
I'm trying to figure out why the new boot.img files keep failing. Even starting from scratch doesn't seem to remedy the issue. For now we'll have to use the first boot.img that I uploaded so no big updates until that gets fixed.

Build 0.5.0 is uploaded! Check out the changelog for details!
When updating:
Download new images
Fastboot flash new boot.img and system.img
If you want to flash GApps do that now with the directions above
NOTE: TWRP can flash boot images, if you save the boot image to your storage, you can flash the image in TWRP.

it possible flash on single sim ? or so dangerous ? thank's you very much

xrenoix said:
it possible flash on single sim ? or so dangerous ? thank's you very much
Click to expand...
Click to collapse
DON'T flash on single sim! If you would like to have nougat there is a thread for the Z5 Premium already made or you can build it yourself by heading over to the Sony developer world mobile website and follow the nougat 7.x.x build guide.

Sony now supports the new r_24 update to Nougat 7.0.0 so I will be updating the ROM soon!
NEW UPDATE IS UPLOADED! Let me know if you run into any issues!

Hi there
Could I follow this tutorial for flashing my e6833?
In advance, thank you very much
Sent from my E6833 using Tapatalk

br0nka said:
Hi there
Could I follow this tutorial for flashing my e6833?
In advance, thank you very much
Sent from my E6833 using Tapatalk
Click to expand...
Click to collapse
If you're flashing this ROM then you should be able to. The ROM is discontinued unfortunately because my phone broke a while back

[ROM] [ 8.1.0 ] Official madOS - Wiko Fever (and clones) [MT6753]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Official Build of madOS ( based on AOSP Oreo ) for Wiko Fever (2gb ram and 3gb ram) with MTK 6753 SoC and its clones:
Micromax Canvas 5 E481
Blu Life One X
Myphone 36
Qmobilez10
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
RIL (Calls /SMS, Data connection, etc)
Wifi
Bluetooth
FM Radio
All Sensors
Lights;
Both storages & MTP
HW de/encoding
Camera (photos and video)
GPS & aGPS
Audio
madOS Extras (the features ya'all used too), plus, some new features we added on Oreo)
Not working:
XDA:DevDB Information
madOS_O_FEVER, ROM for all devices (see above for details)
Contributors
DerTeufel1980, fire855, superdragonpt
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: unlocked bootloader, twrp
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-03-19
Created 2018-03-13
Last Updated 2018-03-22

First time Install Instructions
0) Preparation
0.1) Backup your important data to PC
0.2) Ensure you are running Wiko Fever Android 6 already (also/especially when your device is not wiko fever, but a clone). If you are not, please update to it, before continuing here (replace the preloader from the wiko rom with your stock one, then use 'firmware upgrade' mode in sp flashtool. NEVER use 'format all + download')
Extra steps, if you are on blu life one x:
https://forum.xda-developers.com/showpost.php?p=76003104&postcount=81
0.3) Download “twrp_wiko_fever_oreo.img“: [url]http://www.mediafire.com/file/e96x8ltlyka392e/twrp_wiko_fever_oreo.img[/URL]
0.4) Download “madOS_8.1.0_fever_2018xxyy.zip“ [url]https://www.facebook.com/MediatekAndroidDevelopers/[/URL]
0.5) Optional, Download “Google Apps (aka Gapps)“: [url]http://opengapps.org/[/URL]. Choose: “ARM64“, “Android 8.1“, “nano“ or “pico“ package
1) Unlock bootloader (if not done already):
1.1) Boot for first time your device. I recommend to NOT register/login/add Wifi/add accounts/etc., because the unlock process DELETES all your data in the device. So to go more fast, skip all, and go directly to SETTINGS. In section ABOUT DEVICE, enable the developer options with eight time picks over “Build number”. Then in SETTINGS/DEVELOPER OPTIONS, enable the option “OEM unlocking” and “USB debugging” (if not enabled already), and choose to alollow usb debugging in the popping up window.
1.2) Boot the device in the BOOTLOADER mode (using ADB: "adb reboot-bootloader"). Execute in your computer the command “fastboot oem unlock”, say YES with “vol+” and “power” buttons. Then select reboot. This ERASES completely your device (factory restore), but the bootloader will be UNLOCKED! Two reboots needed.
2) Flash the recovery and boot to it. (choose option a) if you don't have another TWRP already installed, else choose b))
2.1a) Boot in the BOOTLOADER mode (using ADB: "adb reboot-bootloader").
Then execute command “fastboot flash boot twrp_wiko_fever_oreo.img”;
and then “fastboot reboot” (this is a trick to directly bring you to the newly flashed recovery. You can't boot up your current/stock rom at this point anymore).
2.1b) Boot to your current TWRP. Choose install --> image, and select “twrp_wiko_fever_oreo.img“. Then choose “recovery“ as the target. After few seconds, and succesful installation, hit “back“ several times, then go to “reboot --> recovery“
3) Install
3.0) Optional, but recommended: Go to "Wipe --> Advanced Wipe", click "Cache" and then "Repair or Change File system". Then select "Change File system" and choose "F2FS". Swipe to confirm.
Hit "back" three times (you can again choose a partition to change now). Choose "Data" and do as above.
Hit "back" several times, to get back to the main menu. Choose "Reboot --> Recovery".
3.1) While already in recovery (TWRP), connect your phone to pc, and copy “madOS_8.1.0_fever_2018xxyy.zip“ and the Google Apps to your phone.
3.2) Go to "Wipe", and directly slide the slider to the right.
3.3) Get back to main menu with the "back" button
3.4) Go to "Install" and hit “madOS_8.1.0_fever_2018xxyy.zip“, then uncheck all boxes and hit "Add more zips", now choose the Google Apps.
Confirm installation by swiping the slider to the right.
3.5) Reboot System
Click to expand...
Click to collapse
Follow up Install Instructions
Download rom and gapps
boot to recovery
flash rom and gapps
optional: flash superSu/Magisk
reboot system
General F.A.Q.
Q: What the hell is madOS ?
A: madOS, (M.A.D. Team OS), is a ROM based on pure A.O.S.P. with extended capabilities and customizations made by or merge/adapted by M.A.D. Team.
Q: Which recovery should I use for this ROM?
A: Latest M.A.D. TWRP 3.2.1-0 recovery for OREO 8.1.0
Q: How do i flash new recovery ?
A:
1: You can flash it with a scatter file
2: You can simply flash it from the existing twrp recovery: Install> Install image> Select Oreo TWRP> Select "Recovery" as partition to flash.
Reboot to recovery to use new one
Q: Do i need to make full wipes?
A: YES, dont come crying at me, if you didn't .... ;p
Q: What is "full wipes" ?
A: To Wipe : Cache; System; DATA ...
Q: What should i use f2fs or ext4?
A: Both are supported, choose the one you desire
Q: Does this rom have any Theme support
A: Yup, We have working Theme Engine (madOS extras)
Update: On Oreo 8.1.0:
- We have extended Theme support even further ( madLauncher, messaging, etc)
- As well as many fixes
Q: Some translations are missing for my language, can I help?
A: Sure you can, please check our translations repo available here , you can either do a pull request, or if you don't know how to work with git, sent us the XML. Strings for your language ( Check Readme on repo).
Q: I want to report a bug(s) do you have an issue tracker?
A: Yeah... madOS issue tracker
Q: What's working ?
A: Check first Post for current status
Q: App "x" doesn't work, why?
A: Probably not compatible with OREO yet, feedback is welcome
Q: Is the rom rooted?
A: NO, But you can easily root with :
1: Magisk ( v14 onwards.)
2: Super SU ( v2.82 onwards)
IF there are problems in rooting, you need to report it to the root-threads...There's nothing we can do
Q: Should i root together with rom ?
A: Not advised.. mainly the Magisk that gives some weird issues...
Flash ROM and GAPPS (if you use gapps), after first boot get back to recovery and flash your desire rooting method
Q: Does xposed work?
A: Is there Xposed for O? ... then no ;p
Q: How is battery life with Oreo?
A: Pretty awesome
Q: Does this build support Vulcan?
A: No....duh! v
Q: Does doze work in this build?
A: Yup
Q: when will (feature/issue here) be fixed?
A: NO ETA , please
Porting F.A.Q.
No porting support, no port questions allowed on this thread, and porting PMs will be auto-deleted, porting replies will be reported as well
G.APPS F.A.Q.
Q:What GAPPS package should I use?
A: openGapps arm64 nano/pico
Q: How to properly install GAPPS?
A:Flash Rom + Flash Gapps at once
CREDITS and Thanks
madOS Team
Our translators, credits list here
A.O.S.P.
Pure Nexus
AOSPA
DU (Dirty Unicorns)
Omni
HELP supporting madOS
We do this on our free time, however we do have costs on maintaining this :/
Any donation is highly appreciated
You can donate by using
this link
If the above doesn't work in your country, then you can directly donate by using this e-mail adress: [email protected]
About madOS Proprietary Apps
You are NOT allowed by any means, to use our madOS apps on any other build, your rom
This is exclusively for OFFICIAL madOS ROM releases
@To Moderators: Feel free to clean the thread, whenever users start spamming, severe OT, or questioning about porting...

Changelog 19th March 2018:
fixed offline charging
fixed proximity and light sensor
fixed applying smartwake settings after reboot
Facebook release post: https://www.facebook.com/notes/mad/rom-810-official-mados-wiko-fever-mt6753/1640799096003857/

for whatever reason, devDB is not working (very well) at the moment...causing this thread to be shown up, hours after i created it....now it's finally here and updated...and can be used

Thank u so much sir...we owe you?

superdragonpt said:
Android Oreo released
https://forum.xda-developers.com/android/development/rom-official-mados-wiko-fever-clones-t3762804
Click to expand...
Click to collapse
superdragonpt said:
The ROM was made using an Wiko device in the bring up
I know very well this TINNO devices, that are rebranded to many OEMs
In case of baseband (ie: BLU,Qmobile, MMX, you should use your stock baseband modem and place it under vendor/etc)
Cheers
PS: can you, that have other clones ( non-wiko) send us your working baseband?
(This way, we could perhaps just made an flashable zip for baseband or so)
Click to expand...
Click to collapse
Here is firmware folder(baseband) from Life One X with MM update.

Opened an issue about some sensors
https://bitbucket.org/maadteam/mado.../103/some-sensors-light-proximity-not-working

mrmazak said:
Here is firmware folder(baseband) from Life One X with MM update.
Click to expand...
Click to collapse
FERRARI81 said:
Opened an issue about some sensors
https://bitbucket.org/maadteam/mado.../103/some-sensors-light-proximity-not-working
Click to expand...
Click to collapse
Great
This .zip is pushing to system/etc, so this .zip won't work here on Oreo, where everything is moved to vendor/etc
For the time being for the blu, you can either updated the updater-script to push to "vendor" instead of "system" or root it, and move your baseband manually to vendor/etc
About the alsps ( brightness ) what's the sensor used in blu?
We need to enabled it I suppose
Cheers

superdragonpt said:
Great
This .zip is pushing to system/etc, so this .zip won't work here on Oreo, where everything is moved to vendor/etc
For the time being for the blu, you can either updated the updater-script to push to "vendor" instead of "system" or root it, and move your baseband manually to vendor/etc
About the alsps ( brightness ) what's the sensor used in blu?
We need to enabled it I suppose
Cheers
Click to expand...
Click to collapse
So the sensor.lib from Blu?
I will pull it and share.

superdragonpt said:
About the alsps ( brightness ) what's the sensor used in blu?
We need to enabled it I suppose
Cheers
Click to expand...
Click to collapse
Ehm...I have not blue, I have original Wiko Fever
And...I'm noob ...in wich way I could check what's the sensor?

FERRARI81 said:
Ehm...I have not blue, I have original Wiko Fever
And...I'm noob ...in wich way I could check what's the sensor?
Click to expand...
Click to collapse
just because adaptive brightness is not working , does not mean it is the sensor.
If sensor was not working , there is another test (check) you can do.
make a call, then put phone to head and see if screen goes off.
I had before when light sensor was not set correctly, when making a call the screen went black as soon as start a call, then could not get screen back on till 30 seconds after other end hung up the call.
I am away from my LOX now and for few days , so cant give direct test of light sensor.
attached just in case is usefull here are sensor libs from BLU-LOX. They are in /system/lib/hw and /system/lib64/hw.
I believe on oreo they go into /vendor/

Can we flash it over stock Lollipop ROM of Micromax Canvas 5 ??
I have a question that Can I flash it over the stock Lollipop ROM ?? existing kernel is 3.10.65.
Thanks

mrmazak said:
just because adaptive brightness is not working , does not mean it is the sensor.
If sensor was not working , there is another test (check) you can do.
make a call, then put phone to head and see if screen goes off.
I had before when light sensor was not set correctly, when making a call the screen went black as soon as start a call, then could not get screen back on till 30 seconds after other end hung up the call.
Click to expand...
Click to collapse
It doesn't work in call too : the screen is always on.

QUIZILLA said:
I have a question that Can I flash it over the stock Lollipop ROM ?? existing kernel is 3.10.65.
Thanks
Click to expand...
Click to collapse
Please remove the quote of the whole FAQ. This is totally useless to ask your question...
You need to flash wiko mm rom first
FERRARI81 said:
It doesn't work in call too : the screen is always on.
Click to expand...
Click to collapse
I'll check it today

Hello, I write from Padova, Italy,
I have the WIKO FEVER 3GB,I have the problem that after upgrading to MM (Android 6.0), device not connects to PC and no charge. The device is recognized ONLY if it turns off.
Can I do this update procedure with this problem?
I can not connect to the PC because device is not recognized. Can you help me? Can I root through an app installed by the playstore without using pc? Thank you so much for the answers.
Riccardo
ianto:

Rikadoo said:
Hello, I write from Padova, Italy,
I have the WIKO FEVER 3GB,I have the problem that after upgrading to MM (Android 6.0), device not connects to PC and no charge. The device is recognized ONLY if it turns off.
Can I do this update procedure with this problem?
I can not connect to the PC because device is not recognized. Can you help me? Can I root through an app installed by the playstore without using pc? Thank you so much for the answers.
Riccardo
ianto:
Click to expand...
Click to collapse
Why root? To update to oreo, you don't need root... But you still need to copy the new rom to your phone, as well as unlock the bootloader and install the twrp recovery. This needs to be done in fastboot mode by pc. I'd suggest to just try it

Unfortunately I am not very experienced, but I am very interested in solving my problem. I want to install this ROM, but without having to connect the device to the PC.
If I copy the ROM on the SD card. Can I then install?

I am in process of installing new oreo twrp and MADOS.
During install of TWRP, I loose adb authorization. (adb session is "unathorized")
in "prop.default" it has
Code:
ro.secure=1
security.perf_harden=1
ro.adb.secure=1
ro.allow.mock.location=0
ro.debuggable=0
is this intentional?
additional question,
Adb authorize connection window comes up multiple times even after putting check mark on remember this choice.
I think the adb auth problem is my pc, my other phone just started to do this too.
edit:
I have tried couple times to use blu firmware inside vendor folder. But not able to get baseband to be known.
tried just adding blu files ontop of original rom files.
tried removing rom files and adding blu files
tried removing whole folder then adding blu folder
each time I get unknown baseband.
I checked permission and ownership each way I tried and I set it to rw:r:r and root:shell just like original rom version, but not working for me.

One and more questions,....
1. Our bootloader is blocked or already unlocked?
2. If is locked, to unlock the bootloader of our device wiko fever which app I have to install?
3 if isn't locked, how I install a custom recovery like twrp manager?
4 how I boot the custom recovery twrp manager? Maybe if I switch off the device and reboot it, starts automatically the custom recovery?
5 at the end, from twrp can I flash the ROM Oreo?
AHH , last question, can I flash this ROM from my phone with Android MM?

mrmazak said:
I am in process of installing new oreo twrp and MADOS.
During install of TWRP, I loose adb authorization. (adb session is "unathorized")
in "prop.default" it has
is this intentional?
additional question,
Adb authorize connection window comes up multiple times even after putting check mark on remember this choice.
I think the adb auth problem is my pc, my other phone just started to do this too.
edit:
I have tried couple times to use blu firmware inside vendor folder. But not able to get baseband to be known.
tried just adding blu files ontop of original rom files.
tried removing rom files and adding blu files
tried removing whole folder then adding blu folder
each time I get unknown baseband.
I checked permission and ownership each way I tried and I set it to rw:r:r and root:shell just like original rom version, but not working for me.
Click to expand...
Click to collapse
Someone already uploaded vendor files for his model... Was it you? If not, please upload it for us

LENOVO z5 Custom Roms [PIE]

MIUI 10 [9.2.21] for LENOVO Z5 Android P Credits to Art Chen
his is already the third edition. @Art_Chen The author is still very diligent. Now I
have fixed the following problems:
190225 update
Optimize the fluency of the system (the overall use is smoother, the gesture operation does not drop frames) to
improve the stability of the system (from Android 8.1 Upgraded to Android 9)
Fixed several bugs (fixed volte not available, aptX audio no sound, etc.)
A small number of known bugs: fingerprint payment is not available (can be used with Tai Chi or Ed Xposed), there may be some bugs but temporarily
Didn't find Battered Drain
Fix gps , theme , lockscreen wallpaper
If you are using miui, Update don't need to clear the data
DOWNLOAD:-
https://mega.nz/#!6rwQjA6B!z2xdnixiyCt5us6Cjeh9mIkgnqR4jnRLoiyZwt2Mink
BlueTooth Patch (Only if not working)
GDrive Link
MIUI 9.1.31 for LENOVO Z5 Android OREO Credits to Art Chen
Whats in this ZIP?
[attachment="15308074:miui.jpg"]
Download Link
Google Drive Link
BlueTooth Patch (Only if not working)
GDrive Link
BUGS:- No (If found Bluetooth issue use above given patch)
METHOD for FLASHING
1. Tools inside use them
2. OR use TWRP.
use at your own risk
Click to expand...
Click to collapse
ZUI 10 (ported) for LENOVO Z5 Android OREO Credits to Ketai
I understand from guglotransleyta (but it's not exact):
Launcher 5.0 http://4pda.ru/pages/go/?u=https://...LrMKEhvRh0DVNwjccXmsIS3sCBb_AOCAvE&e=81841256
launcher 10.0 http://4pda.ru/pages/go/?u=https://...Dcu3z8zrAdTFCAiIopeOpKnjyf70vI7wYw&e=81841256
Firmware 3.9.075 https%3A%2F%2Fyadi.sk%2Fd%2FHHqqn2P73Zkmpn&e=75597985 (Password for archive: w3bsit3-dns.com)
Firmware 5.0 http://4pda.ru/pages/go/?u=https://...0cO7LPUOMAgwBrhHEyl8ofGvCycokfHbZU&e=81841256
Firmware 10.0 http://4pda.ru/pages/go/?u=https://...0pyMvNo3ckYJSnNm5Hdyqtrwh2NDbF6FCg&e=81841256
As I understand it, there should be 075 with the unlocking bootloader.
Those. The boot-loader is unlocked, debugging is enabled, then into the fastboot and we sew, the batch file in Chinese is full.
Steps:
1. Flash 3.9.075 via QPST (if you already have 3.9.075 leave this step)
2. Unlock Bootloader.
3. Flash TWRP.
4. Flash ZUI 5.
5. Flash ZUI 10
DONE!
BUGS:- None till now
Everything is at your own risk, I did not set myself.
Some link was such a translate in
https: //club.lenovo.co...hread-5412231-1-1.html
FLYME 7 for LENOVO Z5 Android OREO
will be posted later
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON

Duplicate thread closed