Vivo Xshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specs
5.2" 1080p display
16GB/32GB Storage + Micro SD up to 200 GB
Qualcomm MSM8974AA/AC Snapdragon 801
2GB/3GB RAM
2600 mAh battery
Back Camera - 13MP OIS with 6 lenses and F1.8 aperture with Dual flash
Front Camera - 8MP front LED flash
Hi-Fi DAC chip CS4398, Headphone Amplifier chip MX97220 and an ADC chip TLV320.
GSM / HSPA / LTE
2G bands GSM 850 / 900 / 1800 / 1900
3G bands HSDPA 850 / 900 / 2100
4G bands LTE band 1(2100), 3(1800), 7(2600)
Official Stock ROMs
FunTouch 1.2 = 4.3 Jellybean
FunTouch 2.0 = 4.4 KitKat
Official Stock International ROM Zip Package
1.16 FunTouch 1.2 Zip package here
- http://www.vivoglobal.com/dl/6
- http://www.vivoglobal.com/download/4.html
2.4.1 FunTouch 1.2 Zip package here
- http://www.vivoglobal.com/dl/13
- http://www.vivoglobal.com/download/4.html
2.5.3 FunTouch 1.2 Zip package here
- http://www.vivoglobal.com/download/4.html
- http://www.vivoglobal.com/dl/18
2.5.7 FunTouch 1.2 Zip package here
- http://www.vivoglobal.com/download/4.html
- http://www.vivoglobal.com/dl/23
3.7.0 FunTouch 2.0 Zip package here
- http://www.vivoglobal.com/download/4.html
- http://www.vivoglobal.com/dl/22
Official Stock Chinese ROM Zip Package
1.16 FunTouch 1.2 zip package here
- https://yadi.sk/d/JYwKg1fte76CU
- http://pan.baidu.com/s/1bno2tOz
1.18 FunTouch 1.2 zip package here
- http://download1.vivo.com.cn/funtouch/back/vivoX710L/PD1302L_A_1.18.3.zip
6.9.7 FunTouch 2.0 Zip package here
- http://download1.vivo.com.cn/funtouch/vivoX710L/Funtouch_OS_2.0_4.4_PD1302L_A_6.9.7.zip
6.13.0 FunTouch 2.0 Zip package here
- http://www.vivo.com.cn/dl/132
How to Flash Stock Official Firmware
Make sure you have the correct Stock Recovery
Which is This Type of User Interface
Method 1 - Stock File Manager
1. Put zip package in phone root directory internal storage (IMPORTANT).
2. Open Stock file manager app. Find zip package and open it,
There are 2 option,
Update Now (left) and Cancel (right).
Press Update Now.
Wait patiently till complete.
Method 2 - Stock Recovery
1. Put zip package in phone root directory internal storage (IMPORTANT).
2. Enter recovery.
Entering the recovery mode:
- Turn off your phone.
- Hold and press the volume up key + power key together about 10 second.
- Press volume key to select Recovery Mode.
- Press Power key to enter the Recovery Mode.
3. Select Apply update from internal, depends where you put the zip package.
Look for the zip package and select it.
4. Wait patiently till setup is complete.
Downgrade to 1.16
Downgrade is for users who want v1.16 Stock FunTouch 1.2 ROM or to obtain ROOT at 1.16 Stock ROM.
International ROM - can downgrade straight to 1.16
1.16 Zip package here
- http://www.vivoglobal.com/download/4.html
- http://www.vivoglobal.com/dl/6
Chinese ROM - you have to downgrade to 1.18, then 1.16
1.18 zip package here
- http://download1.vivo.com.cn/funtouch/back/vivoX710L/PD1302L_A_1.18.3.zip
1.16 zip package here
- https://yadi.sk/d/JYwKg1fte76CU
- http://pan.baidu.com/s/1bno2tOz
How to Downgrade
Method 1 - Stock File Manager
1. Backup.
2. Factory reset.
Settings -> More settings -> restore factory settings -> Erase all content and settings -> Reset phone.
Or you can factory reset in stock recovery.
3. Put zip package in phone root directory internal storage (IMPORTANT).
4. Open Stock file manager. Find zip package and open it,
there is 2 option,
Update Now (left) and Cancel (right).
Press Update Now.
Wait patiently till complete.
Method 2 - Stock Recovery
1. Backup.
2. Factory reset.
Settings -> More settings -> restore factory settings -> Erase all content and settings -> Reset phone.
Or you can factory reset in recovery.
3. Put zip package in phone root directory internal storage (IMPORTANT).
4. Enter recovery.
Entering the recovery mode:
- Turn off your phone.
- Hold and press the volume up key + power key together about 10 second.
- Press volume key to select Recovery Mode.
- Press Power key to enter the Recovery Mode.
5. Select Apply update from internal, depends where you put the zip package.
Look for the zip package and select it.
6. Wait patiently till setup is complete.
Root Guide (1.16 REQUIRED)
USB driver link
- http://www.vivo.com.cn/dl/67
- https://drive.google.com/file/d/0B4XvRaoY0HBYZ2Y3X25BV09ITDQ/view?usp=sharing
- http://www.mediafire.com/download/a24jxjjh0awaj8t/[www.netded.com]_vivo_driver_v2.0.0.2.rar
- http://pan.baidu.com/share/link?shareid=2986361110&uk=1462801258
- http://developer.android.com/sdk/win-usb.html
1.16 can ROOT (Will work for both 1.16 International and 1.16 Chinese ROM)
Method 1 - Vroot
1. Make sure you have 1.16 ROM
2. Install USB driver on PC
3. On your phone Enable USB debugging (Open stock dialler app and dial *#*#7777#*#* and then toggle on USB debugging)
4. Download and install VRoot (PC version) http://www.mgyun.com/en/getvroot
5. Now ROOT with VROOT.
Method 2 - Towelroot
1. Download and install the application on your device towelroot.apk
2. Open towelroot, press the big button.
3. If everything is successful, after a few seconds, you see the following screen with the message that "you should have already get ROOT, a reboot is not required."
4. Exit the application, put the SuperSU Google Play.
Method 3 - KingRoot
1. Download and install the application on your device KingRoot.apk
2. Open KingRoot, tap on the ROOT button.
TWRP Recovery Guide (ROOT REQUIRED)
For Users that want to flash Custom ROM
Rashr Method
1. Download vivo_xshot_recovery bine.zip
- https://yadi.sk/d/P_sB32CvfKcwa (Direct xshot_twrp.img)
- https://drive.google.com/file/d/0B4XvRaoY0HBYMEZMYVM2OXQtSkU/view?usp=sharing
- http://www.mediafire.com/download/dus05wda5mgb0b5/vivo_xshot_recovery_bine.rar
2. Unzip and Copy xshot_twrp.img into your phone storage
3. Download and install Rashr app in Google Play Store
4. Open Rashr
5. Go to Recovery from storage and find xshot_twrp.img
6. Flash/Install it
7. Done
PC ADB Method
1. Make Sure you have Enable USB debugging and USB driver installed
2. Download vivo_xshot_recovery bine.zip
- https://drive.google.com/file/d/0B4XvRaoY0HBYMEZMYVM2OXQtSkU/view?usp=sharing
- http://www.mediafire.com/download/dus05wda5mgb0b5/vivo_xshot_recovery_bine.rar
3. Unzip vivo_xshot_recovery bine.zip
4. Find and open TWRP Recovery Flasher (Windows Batch File)
5. Plug in phone via USB
6. Press 1 and Enter on your Keyboard. (Flash TWRP Recovery)
Unlock Bootloader
This is optional. You don't need to Unlock Bootloader to flash Custom ROM at this moment. This only enable adb without ROOT, an extra method for flashing Recovery and others. [Credits to mishyf]
https://drive.google.com/file/d/0B4XvRaoY0HBYOGQ1NGpCb0s2dFU/view?usp=sharing
Flash the zip in TWRP Recovery
List of Custom ROMs (TWRP REQUIRED)
Please Backup your current ROMMIUI
MIUI V6 (5.6.1) + ROOT
- http://en.miui.com/download-258.html
MIUI V6 (5.6.1) [Credits to Drov44]
- https://yadi.sk/d/_2jPEtuOh3d84
MIUI V7 (5.8.2)
- http://forum.xda-developers.com/sho...ers.com/showpost.php?p=62494819&postcount=393
MIUI V7 (5.10.12)
- http://en.miui.com/download-258.html
International FunTouch 1.2
International FunTouch 1.2 v1.16 (Stock Unchanged)
- https://yadi.sk/d/TpMhjTPseChAg
International FunTouch 2.0
International FunTouch 2.0 v3.7.0 (Stock Unchanged)
- http://forum.xda-developers.com/showpost.php?p=62416487&postcount=380
International FunTouch 2.0 v3.7.1 with ROOT
http://forum.xda-developers.com/showpost.php?p=63636862&postcount=617
Chinese FunTouch 2.0
FunTouch 2.0 v6.9.7 + ROOT
- http://bbs.vivo.com.cn/thread-1702668-1-4.html
FunTouch 2.0 v6.9.8 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- https://yadi.sk/d/1J3WJ3kCevdme
FunTouch 2.0 v6.10.2 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- https://yadi.sk/d/ML2lcyrBf9W25
FunTouch 2.0 v6.10.3 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- https://yadi.sk/d/cX0_ZXXGfnfcb
FunTouch 2.0 v6.10.3 + ROOT + GApps + xHiFi + MOD + RUS Language [Credits to Drov44]
- https://yadi.sk/d/CwmhzO3nfaYss
FunTouch 2.0 v6.11.1 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- https://yadi.sk/d/Jvehau3Kfq3RH
FunTouch 2.0 v6.11.1 + ROOT + GApps + xHiFi + MOD + RUS Language [Credits to Drov44]
- https://yadi.sk/d/3UALDiItfr9Sd
FunTouch 2.0 v6.12.2 + ROOT + GApps + xHiFi + MOD + RUS Language [Credits to Drov44]
- https://yadi.sk/d/9AHAaaL2h4q3i
FunTouch 2.0 v6.12.2 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- https://yadi.sk/d/J_BovpbghAesP
FunTouch 2.0 v6.13.0 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post61648498
FunTouch 2.0 v6.13.1 + ROOT + GApps + xHiFi + MOD (FOR v6.13.0 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post62074353
FunTouch 2.0 v6.13.2 + ROOT + GApps + xHiFi + MOD (FOR v6.13.1 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post62278351
FunTouch 2.0 v6.14.4 + ROOT + GApps + xHiFi + MOD (FOR v6.13.2 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post62704265
FunTouch 2.0 v6.15.2 + ROOT + GApps + xHiFi + MOD (FOR v6.14.4 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post63811696
FunTouch 2.0 v6.15.4 + ROOT + GApps + xHiFi + MOD (FOR v6.15.2 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post64768044
FunTouch 2.0 v6.15.4 + ROOT + GApps + xHiFi + MOD [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post65044406
FunTouch 2.0 v6.16.1 + ROOT + GApps + xHiFi + MOD (FOR v6.15.4 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post65663095
FunTouch 2.0 v6.16.2 + ROOT + GApps + xHiFi + MOD (FOR v6.16.1 ONLY) [Credits to bine]
- http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post65885801
Extras
How to Install Google Play Store
For FunTouch 1.2
http://www.gizchina.com/2014/07/09/fix-google-services-vivo-xshot-vivo-xplay-3s/
For FunTouch 2.0
In your phone go to Vivo App Store.
Type Google in the search box.
Install Google Play and Google Vivo (image below)
Go to Google Vivo app.
There will be 3 green bar.
Open the 1st bar it will install/load something (image below)
Next.
Open the 3rd bar. (image below)
A Message box appear and choose the left option. (image below)
This will download the Google Play Store.apk
Once complete, download and install it.
Note: In notification bar you can install it straight away)
(Apk Location is in SD card\下载\App)
Now you have Google Play Store.
Enjoy.
Gmail Fix
For users who have "Unkown Issue With Google Play service".
Method 1
Install and run GMSCore.apk and clean data in GMail: Settings-> More settings-> Applications-> All-> Gmail-> Clear data
GMSCore.apk
Method 2
Ok, looks like many of you experience Gmail issue, since i got Gmail to work here is my full story.
After installing/flashing your Custom ROM.
Clear data/cache on Gmail.
Reinstall Gmail app in Play Store .
Freeze "Google Play services" using titanium backup.
Download APK link here and Install Google Play service 7.0.99.
Get gmail2.apk from ZIP 6.10.3/system/app or download link here
put Get gmail2.apk it with RootExplorer into /system/app.
Reboot.
Things to Freeze and Uninstall Unwanted Apps
For Freezing (Use app like Titanium Backup)
-App Store
-Browser
-Vivoice
more app to uninstall follow this link http://ssmaker.ru/49ce1965/
For Uninstall
Go to Setting -> More Setting -> Application -> Factory APP management
Uninstall most of it. Leave the GoogleCalendarSyncAdapter if you're using the calendar.
Better GPS
Link here or here.
Replace it in system/etc.
But i don't see France
There is a flashable zip for France here, you can flash this in TWRP but i would recommend extract the zip folder and find the gps.conf. Then replace it in system/etc.
Accessories
Best case that protect the Camera Lens
http://www.aliexpress.com/item/Flex...roid-Smartphone-Free-Shipping/1878209318.html
Tempered Glass
Just look for the one that have a Arc edge (2.5d) Imak, Vpower, nillkin and much more have them.
Service Code
1. * # 06 # - tried it shows IMEI
2. * # * # 001 # * # * - tried, shows the state (0 or 1) any official flags, including on the line 16 - Flag is_root = 0 or is_root = 1, ie, Was he at least once rutovan. I rutoval phone, then returned to the drain, there is no root, but is_root = 1
3. * # 558 # - I tasted 4 lines in Chinese: "Engineering mode", "Quality verification test", IMEI, "Restore factory settings", "Software information". At the entrance to each of menyushek further information is also displayed in Chinese, translated names of the items in the "Engineering mode", "Quality verification test" by means gugloperevodchika, it tests all iron components (screen, two cameras, touch screen, speaker, vibration motor, and so on .d., etc.).
4. * # * # 4838 # * # * - tried displays four lines of the menu: "Phone information", "Battery information", "Usage statistics", "WLAN information". A lot of different information menyushek many wireless interfaces, cellular, WiFi, etc. Here vary strip frequency, etc. and the like, in particular, exhibited the type of mobile network GSM, CDMA, 4G
5. * # 225 # - will show a picture with ID smartphone components
6. * # * # 305 # * # * - changes the type of the network, only works for the old firmware version 1.16.3 on new versions will cause the phone to hang
7. * # * # 7777 # * # * - "Developer Options", there is a hidden menu, and for smartphones with "normal" android too.
8. * # * # 4636 # * # * - service mode for Windows to version 1.0
9. * # * # 4838 # * # * - service mode for Windows version 1.0 after
10. * # * # 112 # * # * - BBKlog
11. * # * # 118 # * # * - hidden switch mode 3G
12. * # * # 5806 # * # * - show switch mode 3G
13. * # * # 10922768 # * # * - Audio test. Tried, it is less a test audio, and audio setting. Displays a menu of 11 rows, then did not understand.
14. * # * # 2768 # * # * - tried displays exactly the same menu as in the command line above.
15. * # 08 # - the choice of data storage location. Tried, zero reaction.
16. - * # 09 # - switch to "hot swap" SIM card
17. - * # * # 8255 # * # * - Gtalk service monitor
How to get Xposed Framework to work for 6.12.2+
Note: Only Tested on 6.13.1
alt
Download & Install the modified Xposed Installer in this link below
http://forum.xda-developers.com/android/general/vivo-xshot-info-downgrade-root-twrp-rom-t3132533/post62092081
Install the Framework (Xposed Installer -> Framework -> Install/Update)
Reboot your device
Activate your modules (Xposed Installer -> Modules -> Tick Checkbox)
After Activating Modules do a Soft Reboot (Xposed Installer -> Framework -> Soft Reboot)
Done
TWRP Recovery Version
v2.7.1.0 @ First Page - TWRP Recovery Guide heading
v2.8.5.0 @ Page 63
Flash TWRP Recovery Without ROOT and Unlock Bootloader
http://forum.xda-developers.com/and...downgrade-root-twrp-rom-t3132533/post63489653
Hard Brick Fix
http://forum.xda-developers.com/showpost.php?p=63753265&postcount=639
Update Log
6.13.0
6.13.1
6.13.2
6.14.4
6.15.2
6.15.4
6.16.1
Hello Wets. I was vivohappy on the old vivoforums.com. Glad to see that you are still helping out vivo Xshot owners.
androidcymru said:
Hello Wets. I was vivohappy on the old vivoforums.com. Glad to see that you are still helping out vivo Xshot owners.
Click to expand...
Click to collapse
Thanks.
Welcome, glad you're alive.
Incase you're wondering vivoforums got shutdown.
Anyway.
I tried the lastest 2.0 Custom ROM v6.12.2 by Bine and Drov44.
Both can flash without factory reset.
Bine's v6.12.2 Custom ROM has Gmail issue, there is a fix for that and
Viper4android works.
Drov44's v6.12.2 Custom ROM Gmail is working so as Viper4android.
I can't get Xposed Framework to work for both ROM. Not sure this can work with wipe though.
So I had to return to 6.11.1. I need that Youtube Adway and Gravity Box.
Do you know why it was shut down?
I found bine on a Russian forum, not sure where everyone else went. I was hoping it was a short term problem. It's a pity it's gone as there was a lot of useful information for the Xshot and Xplay.
androidcymru said:
Do you know why it was shut down?
Click to expand...
Click to collapse
Forum has been down for a week and counting.
I went to meizufans.eu (associated to vivoforums.com) created a account, PM the admin what had happened.
Here's the reply.
Complain at Mr.Eyckmans AKA HondaRacer. Because of his greed he refused to give it to us. Instead he tried to pull all of us over.
Click to expand...
Click to collapse
androidcymru said:
found bine on a Russian forum, not sure where everyone else went. I was hoping it was a short term problem. It's a pity it's gone as there was a lot of useful information for the Xshot and Xplay.
Click to expand...
Click to collapse
Yeah same. Lucky i saved most of my guide in a text document and Google Chrome Cached.
I already notice the RUS forum, can't seem to register.
Thailand Vivo Facebook is very active though.
So what ROM are you current using?
I'm still using 1.16.2. I am happy with the stability, all camera controls work as they should, too many complaints on the Chinese forums about deterioration in photo quality and the hard controls not working with zoom etc.
Also complaints about battery life was another factor for holding off.
Xposed framework is installed and all the modules are working. GPS is spot on, cell location works 100%, Google Playstore and services update without problems.
With Funtouch so heavily skinned, I see little point at this time to upgrade to Kitkat.
I did install Nova Launcher early on in my purchase, but saw no real gains in speed, and missed the layout and benefits of funtouch.
My wife has Lollipop on her Nexus 5,and having had a play with it, I don't think I'm missing out.
I will keep coming back to this thread as I may update when it looks like it's really worth it
WetsHD said:
Forum has been down for a week and counting.
I went to meizufans.eu (associated to vivoforums.com) created a account, PM the admin what had happened.
Here's the reply.
Yeah same. Lucky i saved most of my guide in a text document and Google Chrome Cached.
I already notice the RUS forum, can't seem to register.
Thailand Vivo Facebook is very active though.
So what ROM are you current using?
Click to expand...
Click to collapse
Hi Wets,
Glad to found you here with the Xshot thread with you. Miss the Vivoforums. Anyway all is well now as I know you will keep this thread alive. Anything worth having in the new update (2.0 6.12.2)? Would like to have a crack on that MIUI Rom V6 as I have it in my MI2 but hate to flash & back if not that smooth as I'm expecting. Hope some people (Vivoforums members), will find this thread and can share their experience.
androidcymru said:
I'm still using 1.16.2. I am happy with the stability, all camera controls work as they should, too many complaints on the Chinese forums about deterioration in photo quality and the hard controls not working with zoom etc.
Also complaints about battery life was another factor for holding off.
Xposed framework is installed and all the modules are working. GPS is spot on, cell location works 100%, Google Playstore and services update without problems.
With Funtouch so heavily skinned, I see little point at this time to upgrade to Kitkat.
I did install Nova Launcher early on in my purchase, but saw no real gains in speed, and missed the layout and benefits of funtouch.
My wife has Lollipop on her Nexus 5,and having had a play with it, I don't think I'm missing out.
I will keep coming back to this thread as I may update when it looks like it's really worth it
Click to expand...
Click to collapse
I don't know.
I'm on bine FunTouch 2.0 6.11.1 with a bit of modification like disable unwanted app, GPS fix and Gmail fix if you have. It's sufficient enough.
I find the GPS and Camera are working quite flawless but i'm no expert. The battery Screen On Time on FunTouch 2.0 is better than 1.2 in my opinion. I get 1 extra hour of Screen On Time.
For Nova launcher, i need the 5x5 home screen and the app drawer. Thus all my phone have Nova Launcher.
Agreed on the Lollipop. i tried CM 12.1, some of the feature is already featured in FunTouch 2.0.
yannis07 said:
Hi Wets,
Glad to found you here with the Xshot thread with you. Miss the Vivoforums. Anyway all is well now as I know you will keep this thread alive. Anything worth having in the new update (2.0 6.12.2)? Would like to have a crack on that MIUI Rom V6 as I have it in my MI2 but hate to flash & back if not that smooth as I'm expecting. Hope some people (Vivoforums members), will find this thread and can share their experience.
Click to expand...
Click to collapse
Thanks, I'm just one person. It will be grateful to share any information for the Xshot.
For 2.0 6.12.2 update, i think it's minor so nothing interesting. I can't seem to install Xposed Framework on any Custom ROM running 2.0 6.12.2, so i decided to fall back to 6.11.1.
I'm in the same boat as you, just to lazy to flash MIUI ROM since you have to Factory Reset. Could Backup APPS only in TWRP Recovery and restore it but i never tried it.
I'm glad to know that we have this thread in xda. I didn't get any update and information for the last 4 month after vivoforum been shutdown. I just want to know if is it true that vivo xshot got lollipop custom rom? Here's the link http://newblogphonereviews.blogspot.com/2015/03/working-tutorial-how-to-updateupgrade_96.html?m=0
The bad news is I can't get through the download link because of the survey ads something like that. Hope someone can give some good news that we can update or upgrade to lollipop. I really want to have lollipop run on our device. Looking forward to know further information. Thanks for this useful tutorial. Keep it up buddy. Sorry for my bad english
namian_semazen said:
I'm glad to know that we have this thread in xda. I didn't get any update and information for the last 4 month after vivoforum been shutdown. I just want to know if is it true that vivo xshot got lollipop custom rom? Here's the link http://newblogphonereviews.blogspot.com/2015/03/working-tutorial-how-to-updateupgrade_96.html?m=0
The bad news is I can't get through the download link because of the survey ads something like that. Hope someone can give some good news that we can update or upgrade to lollipop. I really want to have lollipop run on our device. Looking forward to know further information. Thanks for this useful tutorial. Keep it up buddy. Sorry for my bad english
Click to expand...
Click to collapse
The website link you're providing is 100% Fake/Scam making users believe it's real.
Here's the reason.
- All duplicate content and put "device name"
- Putting ad survey means another red flag
- The comments are duplicate
Lollipop is still in progress i believe, just enjoy your current version you won't miss anything.
If you want to check any Lollipop update, Go to your OTA (Setting -> System Update) or Go to the Official Chinese Vivo Forum " http://bbs.vivo.com.cn/forum-138-1.html " to see any indication of Lollipop.
Thanks, will keep this Thread up-to date as possible.
Any ways Welcome.
I've rooted my xshot. I try to update to rev 2.5.3, but after the download completed and I try to install it, it say need to boot into recovery mod (stock recovery). But when I boot to recovery mod there's nothing to install. Then I reboot to see if anything goes wrong, it just show the notification that my xshot got new update, need to download it again. I tried several time to update but still the same. So I decided want to flash any stable custom rom. So any suggestions? Which one I should try? V6.11 or V6.12? If I flash one of these rom can I just flash it without wipe data/factory reset? Can you please attached more screenshot?
namian_semazen said:
I've rooted my xshot. I try to update to rev 2.5.3, but after the download completed and I try to install it, it say need to boot into recovery mod (stock recovery). But when I boot to recovery mod there's nothing to install. Then I reboot to see if anything goes wrong, it just show the notification that my xshot got new update, need to download it again. I tried several time to update but still the same. So I decided want to flash any stable custom rom. So any suggestions? Which one I should try? V6.11 or V6.12? If I flash one of these rom can I just flash it without wipe data/factory reset? Can you please attached more screenshot?
Click to expand...
Click to collapse
All version are stable, but some have Gmail issue there is a fix for that but require extra time and cannot install Xposed Framework etc.
Bine 6.10.3 - No issue.
Drov44 6.10.3 - I haven't tried it, should be ok.
Bine 6.11.1 - Has Gmail issue.
Drov44 6.11.1 - No issue according to users.
Bine 6.12.2 - Has Gmail Issue and Can't install Xposed Framework.
Drov44 6.12.2 - Can't install Xposed Framework.
You MUST Wipe/Factory Reset if you are coming from any Chinese and International FunTouch 1.2
If you're on Any Chinese 2.0 Custom ROM if can flash with NO Wipe/Factory Reset. Example are you're on FunTouch 2.0 v6.9.7 Custom ROM, it can Flash 6.9.8, 6.10.3, 6.11.1, 6.12.2 with no Wipe/Factory reset but if you are experiencing problem if might have to factory reset.
FunTouch 1.2 based on 4.4 kitkat (Credits to andrejchern)
source
Download Link - https://yadi.sk/d/L_ZtSbbRhM4dG
How to Install
Installation via a custom recovery (TWRP, CWM) do a reset, clean the dalvik cache and select the zip on внутренней(внеш.sd map) install, reboot the system.
Changes
Firmware based on flow FT OS android 1.2 4.4 KitKat. Changes: not all cut Russified right Russian users, changed the font. Added: keyboard, apps from Google (Play Market, Youtube, Gmail, Maps)
Problem
Bugs: Flight memory information in the Russian language, perhaps the video (not tried) when selecting settings. When you enable the geolocation from Google, location is switched on and off. through the settings of Google.
Just downloaded international 1.16. Flash it without factory reset, installation aborted. Try with different recovery, still the same. Need to unroot first so I can update. I have touch distortion issue for awhile and I don't know how to get rid of it, little bit slow to respond when typing. How can I unroot back so I can update to rev 2.5.3? It would be more cool if we have pure cm12 rom without funtouch. Hope somebody can provide it for us xshot user.
namian_semazen said:
Just downloaded international 1.16. Flash it without factory reset, installation aborted. Try with different recovery, still the same. Need to unroot first so I can update. I have touch distortion issue for awhile and I don't know how to get rid of it, little bit slow to respond when typing. How can I unroot back so I can update to rev 2.5.3? It would be more cool if we have pure cm12 rom without funtouch. Hope somebody can provide it for us xshot user.
Click to expand...
Click to collapse
I never have touch distortion issue, probably use a different keyboard might solve it.
I'm really confused of your situation. Just answer those question below might help.
What current ROM you're using right now?
Is your device Rooted?
What current Recovery do you have?
What's the desire ROM you want to flash/install?
Yes I rooted my device using towelroot.apk,
I used twrp,
My desire rom is cm rom that have cm function like my old s4, they used to have plenty of rom that based on cm.
Let us forget about it. Now this is my current situation.
I flashed funtouch OS 2.0 6.12.2rus. I love the new ui.
The problem is...
Battery drain too fast,
Cannot use other launcher,
Can't detect flashdrive,
Didn't have option to select 3g only,
Others work perfectly. By the way, about my touch distortion it is because I used my powerbank damaged USB cable. I tried with other cable and it's working, but when I unplug the cable, the distortion still there. Thanks again for providing this thread buddy ?
Hopefully they solve the battery drain problem for the future update.
Did you Root your phone at 1.16 using Towelroot.apk?
For Battery life
You just flash a ROM recently, probably need to wait couple of days to judge the battery life. Does the battery drain by standby?
To change launcher
Go to Imanager -> App mgt -> Default App Setting -> The Default Desktop -> Now select your Launcher
I can connect a 8GB flashdrive using OTG cable working fine.
And 1TB Portable Hard Drive using the OTG Y cable it needs power though so i plug one of the Y cable in to a Power-bank. Working fine.
To connect 3g only is to go to Setting -> Mobile Network -> Network Mode -> Select 3G(pref)/2G
I can't comment about the Touch Distortion issue, never experience this before.
Hope this will help.
I found that Vivo Xshot is a good phone but less support even in Vivo chinese forum
Related
Unofficial CM9 LuckyIcsGsm 4.0.4
Vodafone Sonic Huawei u8650
by Lucky76
BETA 5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
READ THIS FIRST LINES FOLLOWING IS IMPORTANT. THANKS
WARNING as always I take no responsibility for any of your brick * Vodafone Sonic, then these steps at your own risk, and I recommend you perform these steps only after being certain that you understand what you do and understand their meaning .
Any operating errors may jeopardize the use of your smartphone by requiring you to send him Service Repair.
* BRICK . make your phone like a brick, that is something useless except as a paperweight.
This is my first custom rom compiled from the source of CyanogenMod 9 ICS 4.0.4 updated to 20/07/2012.
New rom compiled on 01-08-2012 with fix mount USB from source.
New rom compiled on 08-08-2012 and new kernel with Overclock and Underclock.
New rom compiled on 11-08-2012 with Fix Bluetooth and Ext. Audio (90%), better incall Audio and Headset Audio. Fix FMRadio with Spirit Radio see below on NOTE
Based on the github reposity of Ivan19871002 for Sonic c8650 CDMA ---> Here and completely restored to our Sonic u8650 GSM with the kernel always of LiGux Ivan @ # 5.
ATTENTION
The rom is the first beta because it has some bugs and problems to be solved ....... So if you want a stable ROM for daily use does not install it there are many custom rom stable. This is intended only for the moment for those who want to make the TEST with ICS.
Help Installing custom rom LuckyIcsGsm
I always recommend before you start to have the battery charged to 100%.
1. A fundamental requirement to install this custom rom
the presence of modified Clockwork Recovery 4.0.1.4 or higher (currently 6.0.1.0 thx udK).
2. Download Link LuckyIcsGsm
LuckyIcsGsm 4.0.4 Beta 5 Gapps ----> Here -----> Recommended All Wipe
MD5sum ----> f2f894116d2ee1e9319648a6a0733b3d
LuckyIcsGsm 4.0.4 Beta 4 Gapps ----> Here -----> Recommended All Wipe
MD5sum ----> b8e22412a654c20cd5067cc6eb91ea55
LuckyIcsGsm 4.0.4 Beta 3 Gapps ----> Here -----> Recommended All Wipe
MD5sum ----> 963743ed807b81269e036a1a0d17f1bc
LuckyIcsGsm 4.0.4 Beta 2 GAPPS ----> Here -----> Recommended All Wipe
MD5sum ----> 7ec7f20e270efc35d70d1eba4408d1ef
3. Help Installing custom rom
Code:
Council had before installing the battery to 100% charge.
A. Copy the file you just downloaded Lucky_Ultra_Sonic_. *. Zip into your microSD.
B. Enter the modified Clockwork Recovery 4.0.1.4 or higher (Current 6.0.1.0 thank you udK).
C. Do yourself a BackUp going to the menu "Backup and Restore" button and choosing the starting of the engine to "BackUp". Ended up back track.
D. Go down the Volume Down button in the menu "Wipe data / factory reset" button and confirm with the starting of the engine. In the new drop down and choose the Yes - delete all user data.
E.Now go back to the main menu and go the menu "Install zip from sdcard".
F. Inside the new menu confirmed on the first line "choose zip from sdcard".
G. Now you must choose and confirm the file "LuckyIcsGsm. *. Zip". Start the installation.
H. Wait for the end of the installation. At the end go back and choose the first menu item "reboot system now".
I. Done now will start as in the first sense. The first course will start a little slower
SECTION Changelog
Beta 5
Code:
1. Fix Bluetooth
2. Fix Ext. Audio (90% or more)
3. Better Incall Audio
4. Better Headset Audio
5. Removed Adrenaline Engine 4.2
6. Fix FMRadio ----> Install Spirit Radio ---> See below on NOTE
7. Other.
Beta 4
Code:
1. New Kernel
2. Added Overclock and Underclock on new my kernel ----> by Lucky76 (base on github of Ivan)
3. Added other Governor ---> Scary, SavagedZen, interactive, smartass....
4. Added IO scheduler ---> vr e sio
5. Fix bug with Play Sore
6. Other.
Beta 3
Code:
1. Added Bravia Engine --> Test
2. Fix Tethering&Hotspot ---> Thx to ThePoison
3. Fix Giochi ---> Thx to ThePoison
4. Added Adrenaline Engine 4.2
5. Added APN
6. Adde SpiritRadio ---> solo per TEST
7. Fix USB mount ----> by Lucky76
8. Other.
Beta 2
Code:
1. Fix Gsensor ---> Thanks ThePoison
2. Fix Market
3. Start with Google Settings
4. Added Nova Launcher
5. Added OI need to serve files
6. Added Root Explore
7. Added Google Search
Beta 1
Code:
1. It starts ... eheheheh
2. Gsm functioning OK
3. Data connection g/3G/H OK
4. GPS OK
5. WiFi OK
6. Fast enough.
7. Others.
SECTION BUGS Hardware & Software.
Software Bugs:
Bugs Hardware: Camera/VideoCamera....... Other ?!?!?!
NOTE
Spirit Radio
Code:
Enter on Setting...
Region Band ----> EUROPE
Audio Method ----> msm7x30 AscendII
Output Device ----> Headset
Output Mode ----> blend Auto
Plug in your headphones and you can hear FMRadio.
Link Download Spirit Radio ---> Here
DOWNLOAD VARIOUS
GAPPS ICS Google ---> Here
Includes all the Google apps are not in the rom ----> WARNING ---> read below.
Unfortunately due to lack of space in the / system package is not installed so I'm trying to solve with a custom rom ready with at least the main app like Google Playstore.
I made a custom rom with basic applications such as installation of Google when you first start, the market PlayStore google search and disregarding the other because of the limited space we have in the system.
I managed to move some apps that were in system / app data / app recovering some space now we have just about 18 Mb. While about 50 mb for the app still available.
Better than that for the moment I could not do.
Table Memory of Beta 2
Code:
: ~ $ adb shell df
* Daemon not running. [background=rgb(255, 255, 255)]starting it now on port 5037 * [/background]
* Daemon started successfully *
Filesystem Size Used Free blksize
/ Dev 87M 48K 87M 4096
/ Mnt / ASEC 87M 0K 87M 4096
/ Mnt / obb 87M 0K 87M 4096
/ System 17M 186m 168m 4096
/ Date 160M 50M 4096 109 million
/ Cache 1M 63M 61M 4096
/ Cust 1M 20M 18M 4096
/ Data / HWUserData 20M 19M 884K 4096
/ HWUserData 17M 300K 17M 4096
/ Mnt / sdcard 6G 1G 4G 4096
/ Mnt / secure / ASEC 6G 1G 4G 4096
CREDITS
CyanogenMod 9 Team for their great work of sources CM9.... Big Thanks
dsixda for its HTC Android Kitchen
udK for his New Clocwork Recovery mod 6.0.1.0
Ivan19871002 to his base for the c8650 to compile the source cm 9 ---> Here and also for its Kernel
ThePoison for its test and its Fix ---> Red Bug Alone (strictmode)
Bimbomix for its Overclock and Underclcok
All those who try: If you really want ......
Soon I will publish my github with the basic build, or will a zip for those who want to try a full compile from source.
Bye Lucky.
Thanks bro
dessi_007 said:
Thanks bro
Click to expand...
Click to collapse
Is ready for download new Beta 4......
Bye
Ready for download new Beta 5.....
Bluetooth fixed.
Bye
erlucky said:
Ready for download new Beta 5.....
Bluetooth fixed.
Bye
Click to expand...
Click to collapse
Close to a camera fix? I use this on my girlfriend And brothers phone, great rom. They have the Att Fusion U8652 though
The Bownz said:
Close to a camera fix? I use this on my girlfriend And brothers phone, great rom. They have the Att Fusion U8652 though
Click to expand...
Click to collapse
Thank you....
I hope to fix camera soon...... for u8652 is all OK?
What change from u8650 to u8652?
Bye Bownz.
erlucky said:
Thank you....
I hope to fix camera soon...... for u8652 is all OK?
What change from u8650 to u8652?
Bye Bownz.
Click to expand...
Click to collapse
All is okay. u8652 is just like the u8650 except it's a prepaid ATT Gophone.
Thanks for your Work
I've been using your rom since Ver 3 and thank you for your contribution.
It has been running pretty well so far but the phone gets slow at times. Probably due to all the programs I put on it.
I have noticed one problem....not sure why it happens. It occurred in the other 2 versions also.
The stock launcher get replaced by Nova or Trebuchet on its own. I go to settings and there is no way to remove the default launcher.
I even used Home Switcher and right now Launcher disappeared on its own...no longer listed in apps or anywhere else. I'll try to get more info if you need it.
You mention CWM ver 6 in your instructions but I have not found it for this phone anywhere. I'm using 4.0.4 now.
Do you recommend the ver 6? If so where can it be downloaded from?
Once again, thank you. I'll keep on flashing and give the ROM a good test.
rezz93 said:
I've been using your rom since Ver 3 and thank you for your contribution.
It has been running pretty well so far but the phone gets slow at times. Probably due to all the programs I put on it.
I have noticed one problem....not sure why it happens. It occurred in the other 2 versions also.
The stock launcher get replaced by Nova or Trebuchet on its own. I go to settings and there is no way to remove the default launcher.
I even used Home Switcher and right now Launcher disappeared on its own...no longer listed in apps or anywhere else. I'll try to get more info if you need it.
You mention CWM ver 6 in your instructions but I have not found it for this phone anywhere. I'm using 4.0.4 now.
Do you recommend the ver 6? If so where can it be downloaded from?
Once again, thank you. I'll keep on flashing and give the ROM a good test.
Click to expand...
Click to collapse
Ok this is the link with new recovery 6.0.1.0r1 ---> Here
Flashe this zip file with your recovery.
This is the same recovery but for install you must use adb
http://www.mediafire.com/?l33zzih4tzwvg37
Bye.
erlucky said:
Code:
Enter on Setting...
Region Band ----> EUROPE
Audio Method ----> msm7x30 AscendII
Output Device ----> Headset
Output Mode ----> blend Auto
Plug in your headphones and you can hear FMRadio.
Click to expand...
Click to collapse
Thanks for the mention. I now have a customer running this ROM.
Setting Debug-> BC 4330/20780 to "Enable" and reboot the phone if any problem may also help.
The latest free version of Spirit FM is always at the top here: http://forum.xda-developers.com/showthread.php?t=1059296
Not yet posted, but August 14 and later versions should automatlcally set Audio-> Method and the BC 4330...
"Region Band ----> EUROPE" is only for Europe of course. Default is North America.
"Output Device ----> Headset" isn't needed.
"Output Mode ----> blend Auto": does this enable stereo ? The free version is usually Mono, but I may change that.
No sd-ext found
I've had this issue several times while running BETA 5:
I noticed it when doing a backup from CWM.
Also, at times some apps that were moved to the SDCard give error "app not installed".
Rebooting seems to fix the issue with apps missing sometimes.
This somehow seems related to moving apps to SD.....but I'm not experienced enough to be sure.
I have manually created the partitions from CWM and reflashed Beta 5 and the issue still occurs.
I bought a new SD card and installed it yesterday....same problem.
Not sure if this is related to this ROM, my phone U8652, or something I'm doing wrong.
There was also an issue with the launcher that I posted about earlier. I'm running Nova this time and so far that is okay.
Thanks for the link to CWM 6....its installed and working fine on my phone.
JB CM 10 for u8650 ehehehhe
I have compiled and booted CM10 from source...... :azz: to solve a few quirks and then we are at the same level of ICS 4.0.4. (i think)
Still too early to publish it so for the moment no download ..
CM9 and 10
I'm still running CM9 and it is doing fairly well. The camera issue is already known but I have a few issues with my phone freezing/crashing/rebooting at times.
I've tried to retrieve error logs but they contain no info on the crashes. When using droid explorer to view logs gives the following message:
logcat
sh-4.1# logcat
Unable to open log device '/dev/log/main': No such file or directory
Click to expand...
Click to collapse
Log Collector is not much better:
Log Collector version: 1.1.0
Device model: u8650
Firmware version: 4.0.4
Kernel version: 2.6.35.7-perf
[email protected] )
#4 PREEMPT Thu Aug 9 18:49:17 CEST 2012
Build number: cm_u8650-eng 4.0.4 IMM76L eng.luca.20120811.155036 test-keys
Click to expand...
Click to collapse
Neither is any help. Is there another way to gather info on crashes and other problems?
The ROM generally runs well, even with a lot of apps installed and working the phone pretty hard.
CM 10 sounds great. Looking forward to giving it a try. Thanks.
rezz93 said:
I'm still running CM9 and it is doing fairly well. The camera issue is already known but I have a few issues with my phone freezing/crashing/rebooting at times.
I've tried to retrieve error logs but they contain no info on the crashes. When using droid explorer to view logs gives the following message:
Log Collector is not much better:
Neither is any help. Is there another way to gather info on crashes and other problems?
The ROM generally runs well, even with a lot of apps installed and working the phone pretty hard.
CM 10 sounds great. Looking forward to giving it a try. Thanks.
Click to expand...
Click to collapse
Hi
We see if can optimize ram and fix th Foto Video Camera.
The crash there are for the memory.
Capacitive Buttons wont Lit up
Hi guys,
Beta 5 is running smoothly on my Prism except for the Capacitive Buttons that refuse to Light Up. Anyone here is facing the same issue and is there a work around for it ?
Thanks
Edit: Nevermind, I enable Auto Brightness and it's back to work
hi,
i have beta 5, and it is great. But im using in my Huawei Ideos X3 (U8510) since the roms are compatible each other. But the phone is way too slow, now that i have my apps installed. The launcher takes more than 5 sec to appear if i leave an app. Can something be done in order to improve performance?
CommeRestus said:
hi,
i have beta 5, and it is great. But im using in my Huawei Ideos X3 (U8510) since the roms are compatible each other. But the phone is way too slow, now that i have my apps installed. The launcher takes more than 5 sec to appear if i leave an app. Can something be done in order to improve performance?
Click to expand...
Click to collapse
hey is there any progress of this rom? i had my sonic for a short time and looking for rom that works good and stabel and i live in sweden so need swedisch are this rom stil under development?
any chance of getting this camera fixed? AWESOME rom otherwise
... Ext. Audio (90%), better incall Audio and Headset Audio.
Click to expand...
Click to collapse
Using Beta 5, and i'm really satisfied with ROM, but - InCall audio is still too low...(is loud when on speakerppfone or handsfree). External (back side) & headphone (plugged in) audio is loud and awesome in any way. How to increase InCall Audio volume more? I tried looking in build.props, but no luck or i missed it.
TNX
P.S. ES FileExplorer won't work in Root mode (Settings > Root settings > Root Explorer) - I enable it, su gives root permission (says granted), and then "Sorry, test failed, this feature cannot run on your phone"
hi i am used to this rom but 100 or 120mb rom used unnecessarily, programs that not space on, why?? the phone is working so heavy other than that very nice and camera bugs when succesfully??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Come into the light & see what LeeDrOiD can do for you!!
All carriers supported
My stuff, has been kicking around longer than your stuff... be it hacks, mods, tweaks or ideas, I don't complain that it's spread wider than a porn stars legs. we are all open source developers with the ability to share and get along, it's common courtesy to ask and give a thanks, don't just take and hope for the best!
Some of you know me, some of you don't... (A quick Google search will give a lot away)
My Name: Lee Bailey (AKA LeeDrOiD)
My Hobby: Android Rom & Kernel Development
One of the first ever Android HTC Sense ROM Developers (If not the first), I started with the HTC Hero & have been developing ever since!
@MrHofs - LeeDrOiD Graphics Designer & Themer
@~clumsy~ - Kernels, Code & LeeDrOiD.co.uk
@The Great Dane - A dear friend, tester, long term supporter & all around awesome guy
@exocetdj - Tester & Team entertainer
@Scabes24 - Themer (When he decides to do some graft)
@baadnewz - Old friend & collaborator
@SoLdieR9312 - SVN & Nightlies
@leefear - Hosting
My Wife - For putting up with me & XDA
@Lyapota | @OMJ | @A5J4DX l @snq- l @scar45 | @damo | @Team RC | @m-deejay |@ klquicksall | @rmk40 | @SteelH | @j4n87 | @daniels7 | @PG101 | @Irvysan | @ShowP-1984 | @broncogr | @lyapota | @mwilky | @patensas | @SvaDev | @Captain_Throwback | @Lord ClockaN | Team Cyanogen | Android Ice Cold Project
LeeDrOiD Accepts no responsibility for:
Any damage to your device
Any loss of data
Lack or loss of sleep - Due to but not solely caused by ROM flashing addictions
The end of the world
Or your granny's Alzheimer's (It's a disease, it had nothing to do with me)
All of my builds are tested personally & by a number of close friends, I only develop for devices I own & use
The OLD ROM
. ROM - Based On: HTC Europe 3.35.401.12 Official base
Android 6.0
HTC Sense 8 with Freestyle themes!
Rooted with the latest SuperSU thanks to @Chainfire (OPTIONAL)
De-odexed & Zip-aligned
init.d & su.d support
Disable error reporting
Cleaned up bloat
BusyBox installed
SQlite3 support, Bash and Nano shell support
External SD write permissions
Removed HTC logging & analytics junk
Package Signature Checking Disabled
Clear cache at boot time
Lots of configuration changes and speed enhancements
Improved battery vs. Stock builds
Created and added Android Logo font pack (S electable in settings)
Enabled blinking LED whilst charging
Enabled flashlight shortcut in power menu
Enabled auto selfie feature
Enabled voice activated capture
Multi user support
Enhanced AppOps
Ambient display / Doze Support
Advanced Power Menu - Reboot, Recovery, Bootloader & Safe Mode
China Sense recent apps with RAM display and kill all button (Optional)
Home shortcut menu (enable and hit menu in Prism)
Improved battery stats
SystemUI Tuner - long press settings icon in pull down to enable
LeeDrOiD custom build trickery
LeeDrOiD Boot animation, audio & wallpapers .
Custom LeeDrOiD Locales & Language support . And lots more........
Supported Languages:
English, Czech, German, Espanol, French, Italian, Dutch, Polish, Russian, Norwegian, Korean, Greek, Turkish, Swedish, Danish, Portuguese, Finnish, Thai, Korean, Vietnamese, Chinese, Japanese, Portuguese, Croatian & More
Aroma
Clumsy Kernel
Optional exchange mail admin hack
Optional stock boot animation and audio
Remove HTC App's . Remove HTC Widget's
Remove Google & misc apps
Default Tweaks toggles
HTC Sense 8 . HTC 10 camera
Sense 8 touchPal keyboard
LeeDrOiD Tweaks
UI Tweaks
Sense Launcher Landscape Support
Infinite Apps in Folders
Allow All Rotations
Enable APM (Advanced Power Menu)
China Sense Recent App Style (Includes a RAM usage monitor & kill-all button)
China Sense (Launcher without an app-drawer, alternative Telephone & Messages UI)
Toggle App Circle Side Bar
App Circle Side Bar position & size
Choose App Circle Side Bar Apps
StatusBar
Right Corner Quick - Quick settings pull down
Traffic Indicator (Up-stream & down-stream data speed)
Traffic Indicator Colour
MIUI Battery MOD
Disable NFC Notification
Disable USB Debugging Notification
Disable Power Saving Notification
Disable Android Sync Notification
Disable MTP Notification
Hide BoomSound Notification
Disable Heads Up Notification
Blink LED on notification while charging
QS pull down battery % display
QS Brightness slider toggle
Pull down user switcher
Hide StatusBar Clock
Centre Clock
AM/PM Clock styles
Hide Battery Icon
Buttons
Enable/Disable Navigation Bar
Navigation Bar Size
Re-map recent apps key
Long press volume media controls / ambient pulse
Long press back button to kill foreground app
Double Tap Status Bar to put the device into sleep
Control keyboard cursor with volume keys
Enable persistent nav bar menu button
Hide IME Switcher button
Enable flash-light on long press power button
Power
HTC Power Manager Toggle (pnpmgr)
Haptic feedback duration
Brightness Twilight Mode
Ambient Display Settings toggle
Ambient Display on significant motion
Vibrate & ambient on significant motion
Ambient display duration
Ambient display brightness
Ambient display delay time
Ambient display fade intime
Ambient display fade out time
Networks
Large Caller Contact Picture
Hide Photo Mask for low-res pictures
4G / LTE Notification Switch
Auto Record Incoming / Outgoing Calls
Disable SMS to MMS Converstion
Toggle Fast Dormancy
Misc
Security Tweaks
Lock QS Pulldown when device locked
Lock long press power when device locked
Force 100% Jpeg quality in HTC 10 Camera
Launch HTC Gallery + Editor or Google Photos from Camera
Launch Hidden Marshmallow Land Game
Toggle Boot Audio
Default USB Mode (ADB/ADB MTP)
Enhanced MM Permissions (More granular perms with a timer)
Default app install location
Advanced
Fix Permissions
ZipAlign apks
Mount System RW / RO
Trim Partitions
Wipe Cache
Wipe Dalvik-cache
Known Issues
None - you tell me!
Please make sure you have the latest HTC Hima 3.35.XXX.XX Marshmallow firmware installed prior to installing this ROM
The OLD ROM base is 3.35.401.12
If you are on Sprint or T-Mobile US, use the latest carrier specific MM Firmware package
A full wipe is not necessary, although always recommended to avoid issues
First boot will take approximately 10 minutes due to Art optimization
(If your device gets warm during ART optimization, don't panic, the M9's super sleek alloy body is like 1 big heatsink)
A quick whistle stop tour of flashing a custom build
Unlock your device boot loader via > HTC Dev
Flash the latest TWRP recovery image
Insure you have the correct firmware version
Nandroid backup your entire stock system or previous build
Reboot your device and copy the LeeDrOiD rom. zip to your internal memory
Reboot to recovery (Power off > Hold Vol down & power > reboot to bootloader > reboot to recovery
Select the install option and locate the LeeDrOiD rom zip on your sdcard
Follow the Aroma installer & be patient
OLD ROM - LeeDrOiD One M9 V8.3.0 - STABLE - September 15th (2016!!!)
Fix Verizon boot issues
Remove traces of SuperSU from Tmobile-US & Sprint boot.img's
Fix init.d support and enable default adb for Sptint, Verizon & Tmobile-US
Other misc carrier fix-ups
Aroma: Install SuperSU or run UN-Rooted
SuperSU 2.78 - Systemless
Add Aroma options for stock Android LockScreen & Twilight Mode
Backup and restore of init.d scripts
Art optimizations - faster boot time after wipe / dalvik wipe
Enable locking of QS Pulldown when device is locked
Enable locking of long press power when device locked
Removed delay and dialog when rebooting to recovery
Removed delay in power button long press
LeeDrOiD Tweaks V9.0.2
- Too many changes to list
Fix SystemUI Tuner FC
Patched and updates HTC Sense Home 8.14.781908
Add App Circle Side Bar! - Ported from CM/OMNI (Configurable in Tweaks)
Add Long press volumes down for flashlight (toggle in tweaks)
Add Signal strength indicators in QS pull down (toggle in tweaks)
Fix auto record incoming & outgoing calls
Remove Facebook, Twitter, Photos & DropBox to reduce ROM zip size & fix install issues
Update all inbuilt applications
NEW ROM - port from LeeDrOiD_10 rom for HTC ONE M9 based on NOUGAT - DOWNLOAD LINK
Downloads, Live change log's, SVN guide & nightly builds all available at LeeDrOiD.co.uk
Using SVN & keeping up with the latest ROM changes, just got a whole lot easier!!
Grab the all new SVN Nightly Zipper from www.LeeDrOiD.co.uk
With just a few clicks, you will have the latest updates as they land & no more downloading full ROM zips!
Enjoy & welcome to the world of LeeDrOiD
Foot Notes (In the footer of course)
A few things to note regarding the un-rooted option:
1. If you dirty flash selecting Un-Rooted, all traces of SuperSU will be removed, this will allow Magisk or an alternative root method to be installed.
2. Please complete 1 full boot before installing Magisk.
3. Users can run un-rooted if they wish, I can confirm that Android Pay and Pokemon Go both work after installing the ROM un-rooted.
4. All tweaks options requiring root access will be removed from tweaks if running un-rooted, 90% of these options can be configured in Aroma so you are only missing out on Kernel settings, as init.d is backed up and restored when flashing, your previous configurations will be retained, so you can flash with root, set up then re-flash un-rooted
XDA:DevDB Information
LeeDrOiD One M9, ROM for the HTC One (M9)
Contributors
LeeDroid, The Great Dane, Golv
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 3.35.401.12/4.28.401.3
Based On: Sense 7 / 8
Version Information
Status: Stable
Current Stable Version: V4.0.0 rev.78
Stable Release Date: 2017-11-07
Created 2015-03-31
Last Updated 2017-11-17
Reserved
F A Q
Q 1: After I flash your ROM and reboot my device, my device keeps rebooting/bootloop?
A: Make sure you flash the correct firmware
Q 2: Should I use a task killer on the LeeDroid ROM?
Not recommended, is you really want to, use the one that came with the rom.
Q 3: Backup? What is that?
A good idea is to back up all your data and settings from the phone before flashing a new rom with a full wipe. Best app available is Titanium Back up
The best way to back up the contacts is to sync it via HTC Sync or via your gmail.
Q 4: Are Nandroid and Titanium backup the same thing? How do I manage backups?
No, Nandroid backs up the ROM and Titanium backs up the applications. Nandroid is what you do using the recovery and it makes the exact image of your ROM along with the data.
Q 5: On what occasion will I lose my data (apps, contacts etc)?
Only when you flash the rom wiping data using the Aroma installer option. When you just flash a rom or a .zip from recovery, it will not wipe anything unless otherwise mentioned.
Q 6: I was on stock (or another rom from another cook) and I flashed LeeDroid rom, now I am having some problems.
1. Try to rebooting the Phone and see if it makes a difference.
2. Reboot into recovery and clear cache and dalvik, reboot the phone and clear data of the apps causing problem.
3. Reboot into recovery, reflash the rom choosing full wipe in the installer.
Q 7: How do I flash Full wipe and what does it erase?Reboot into recovery, install a zip from sd card option, select the rom, follow the Aroma installer and select "Flash with wiping all (or something to that effect*)
Q 8: The screen is not very responsive and is lagging.
Let the phone settle down a bit after you unlock it. It generally needs a few seconds to kick up the CPU.*
Q 9: The market is not installing anything. Gives error.
Reboot into recovery and select “clear cache partition”. And under settings - applications - Manage applications - under the Market app < Clear Data>.
Q 10: My battery is draining heavily.
When you first flash a ROM this is what happens. Give it atleast one full charge cycle and it should come back to normal. If required, reboot into recovery and clear battery stats. It is advisable to do so on 100%.
Common Opinion - Heavy battery drain is one thing that you cannot complain about on this rom, for sure. The battery life is much above average*
It's NOT recommended to empty the battery, it may course a poorer battery performance and life cyclus.*
Q11: Should I run the phone battery to zero percent, and what if it does??
A: Absolutely not! Both the current recoveries are giving problems while pulling the battery up from zero percent. If the phones dies off due to battery being zero, try to reboot it into recovery, flash the stock recovery. If it doesnt, then plug it into the wall charger and leave it for as long as it takes for you to boot it. Then flash the stock recovery, charge it fully and do your stuff.
Q12: MMS Problem?
A: Please check your APN settings.*
Q13: Some games that use the motion/G sensor are not working as they should.
A: Re-Calibrate your Gsensor –> Settings – Display – Gsensor Callibration
Q14: I dont like the animations. Dont want them.
A: Go to settings - display - animations.*
Q15: How do I change the bootanimation or the downanimation?
A: System\Customize\Resource or System/Data/Local. Replace the boot/down animation.zip file with the one you want. The new file must be named bootanimation.zip/downanimation.zip.
Mine
Way to go Lee!!!
I will up a stock rooted odex build in the next few days along with an option to flash back to stock, probably an RUU or ARUWizard + rom.zip combo.
Could you please make clear if I can somehow flash this on my O2 Device.
I'm on 1.32.206.15.
Or do I first have so get supercid or s-off?
DroidShift79 said:
Could you please make clear if I can somehow flash this on my O2 Device.
Click to expand...
Click to collapse
Hi
Check the install path mentioned just above the download links, HTC Dev unlock your device, flash TWRP, backup & flash the rom zip.
Providing the install path matches, O2 UK will work without issue
No supercid nor s-off needed?
That rom reads so nice. I'm downloading. [emoji4]
DroidShift79 said:
No supercid nor s-off needed?
Click to expand...
Click to collapse
No supercid or S-Off is required, simply the latest HTC update... remember to backup your current install
Added to the OP
A quick whistle stop tour of flashing a custom build
Unlock your device boot loader via HTC Dev > http://www.htcdev.com
Flash the latest TWRP recovery as posted by @Captain_Throwback > TWRP For the HTC One M9
Nandroid backup
Go to the Advanced TWRP section and select file manager
Navigate to "/dev/block/platform/f9824900.sdhci" > if this path exists you are good to go!!
Reboot your device and copy the LeeDrOiD rom. zip to your internal memory
Reboot to recovery (Power off > Hold Vol down & power > reboot to bootloader > reboot to recovery
Select the install option and locate the LeeDrOiD rom zip on your sdcard
Follow the Aroma installer & be patient
LeeDroid said:
Navigate to "/dev/block/platform/f9824900.sdhci" > if this path exists you are good to go!!
Click to expand...
Click to collapse
Did /dev/block/bootdevice/by-name not work for you? It's the default path.
Captain_Throwback said:
Did /dev/block/bootdevice/by-name not work for you? It's the default path.
Click to expand...
Click to collapse
It didn't want to play & wasn't visible so I went with the direct mount, mimicking the m8 install bud, from the feedback i have had it seems generic, flashed 2 devices numerous times with test builds and all is well ?
Uploading the guts of an RUU as we speak, ARUWizard from the M8 along with an official signed 1.32.401.8 as a fallback, once again tested numerous times
Good to see first ROMs poppin' up!
hm.. installation error in aroma log
Code:
installing busybox
creating symlinks
setting permissions
set_metadata_recursive: some changes failed
installer status: 1
whats that, any idea how to fix?
k1moe said:
hm.. installation error in aroma log
Code:
installing busybox
creating symlinks
setting permissions
set_metadata_recursive: some changes failed
installer status: 1
whats that, any idea how to fix?
Click to expand...
Click to collapse
Very strange indeed, which version of twrp are you using? And did you check the MD5?
I installed this build twice to 2 different devices prior to upload.
About to go to sleep so check the md5 , if it matches, full wipe & try again, if it fails, restore your backup & I will take a look tomorrow evening..
Love how quick backup and restore is in this beast.
Edit: I am running a slightly modified version of twrp, link below but as always, use at your own risk. Team win and all affiliates will not be held responsible ?
https://www.dropbox.com/s/2c0doa2mxulbr1r/twrp-2.8.6.0-hima-LEE.img?dl=0
LeeDroid said:
About to go to sleep so check the md5 , if it matches, full wipe & try again, if it fails, restore your backup & I will take a look tomorrow evening..
Click to expand...
Click to collapse
Get some rest, you deserve it
Firstly: thanks for the efforts.
And do we really need the latest ota update to flash this? As soon as I got my hands on the phone I immediately flashed TWRP, so I'm in a bit of a predicament right now as I can't update via OTA right now...
@LeeDroid
Here you go. 95J866217F9292610
You deserve much more.
KratosAurion said:
Firstly: thanks for the efforts.
And do we really need the latest ota update to flash this? As soon as I got my hands on the phone I immediately flashed TWRP, so I'm in a bit of a predicament right now as I can't update via OTA right now...
Click to expand...
Click to collapse
I would say YES you need latest OTA before flashing this rom. Lee mentioned it for a reason so I would follow the instructions. Why don't you just restore stock and grab the OTA just to be on the safe side ?
LeeDroid said:
Very strange indeed, which version of twrp are you using? And did you check the MD5?
I installed this build twice to 2 different devices prior to upload.
About to go to sleep so check the md5 , if it matches, full wipe & try again, if it fails, restore your backup & I will take a look tomorrow evening..
Love how quick backup and restore is in this beast.
Edit: I am running a slightly modified version of twrp, link below but as always, use at your own risk. Team win and all affiliates will not be held responsible
https://www.dropbox.com/s/2c0doa2mxulbr1r/twrp-2.8.6.0-hima-LEE.img?dl=0
Click to expand...
Click to collapse
latest twrp and md5 looks correct. but..
yeah man... return of the droid with your version of twrp it works. thank you so much for your help :highfive:
k1moe said:
latest twrp and md5 looks correct. but..
yeah man... return of the droid with your version of twrp it works. thank you so much for your help :highfive:
Click to expand...
Click to collapse
Glad to hear it worked out for you [emoji106]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KatKiss ROM
MarshMallow 6.0.1 ReleaseAsus TF101
Please note that this version is made for and tested on the TF101 model.
This rom is an aosp based rom with my own additions on top of it.
The main motto of the rom being Kiss. Even though the Meerkat could give you a kiss, it stands for Keeps it Sweet and Simple too
Which means that just like the other K.A.T stuff, the rom's main goal is efficiency, speed/res ponsiveness,
while not adding bloated features that will slow things down
DOWNLOADS:
Latest Rom Version: KatKiss-6.0_034.zip | Mirror
[*] Gapps: opengapps pico
SuperSU: SuperSU BETA 2.52
Sound improvements & gps quick fix : K.A.T App
SL101 Compatibility Pack: KatKiss-6.0-sl101-compat-V5.zip (To flash after the rom for the Asus Slider SL101 only, DO NOT flash for the TF101 model)
Install Instructions:
These builds are designed to be installed with a recent recovery.
TWRP 2.8.1 is recommended: available here
Older versions of TWRP like 2.3.x won't work.
Backup everything !
Go to recovery
[*]The first time you install: Format /data (full wipe doesn't format)
(you can skip this step if you're already on the same main version of KatKiss, if ever you encounter a problem redo a full clean install and format /data and try again before reporting )
Then *EVERYTIME* flash (all together):
rom zip
SuperSU zip
[*]gapps zip
Wipe cache/dalvik
Reboot
Rom Main Features:
MultiWindow Support with 2, 3 or 4 panes setup
High speed and responsive oriented
High performance and overclocked KatKernel included
Dock keyboard Support with full special/function keys support
Global Keyboard Shortcuts / KeyOverride Macro association (See post #2 for more info)
HDMI Support
Battery Level Indicator & Dock Battery support + Mods (icon/Text/%)
CIFS, ext4, NTFS, ExFat support
RRO Theme Engine - Themes & more info
Native Android FSTRIM + Manual scripts for Database optimization and fstrim (see post #2)
Media Scanner Filters
Navbar with left, balanced (PixelC like) or middle aligned buttons.
All Wifi channels support
Integrated cpu & io performance settings panel
Custom Navbars buttons long press actions
Advanced power menu with reboot options.
User Immersive mode and actions with automode when docked setting
Advanced per application permission management (AppOps)
Ethernet-auto support
Misc utils Busybox, rsync...
Custom Quick Settings tiles
ChangeLog: http://public.timduru.org/Android/KatKiss/6.0/ChangeLog.html
Rom Source: https://github.com/timduru (branch katkiss-6.0)
Credits:
Original banner concept by i9apps, Bootanimation by mgeniusm, original drawing by BBF
Chainfire for SuperSU
WebPage
How to report
What to include in the report
Disclaimer: The usual
Use at your own risk, I won't be responsible for any damages caused to your Transformer or to yourself.
In most cases if something breaks, flashing a rom on top should fix it.
XDA:DevDB Information
KatKiss-MarshMallow, ROM for the Asus Eee Pad Transformer
Contributors
timduru
Source Code: https://github.com/timduru
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 2.6.x
Based On: AOSP
Version Information
Status: Stable
Created 2016-02-19
Last Updated 2018-10-19
Tips
First Install
Make sure you do a format /data the first time you install the rom
(backup your internal storage first if you want to keep something)
The first boot after a rom flash can take a few minutes as ART is slower than dalvik to optimize the applications, but is faster after the 1st time.
(First boot takes ~4-5 minutes without gapps and 10+ minutes with gapps)
Also keep in mind that after a fresh install, it might take a bit of time to get up to full speed as media scanner & google are checking/scanning and restoring stuff.
Bluetooth
Bluetooth might require to be turned on twice before it scans and displays the available devices.
Wallpaper Modes
Different Wallpaper modes have been added in Settings => Display
** Normal (regular android mode)
** Disable System Wallpaper rendering (set as default)
** Disable Wallpaper service
2nd setting will prevent the wallpaper being rendered by the system making things faster and also freeing resources
That's the recommended setting you want to use if you are using a launcher that has internal wallpaper rendering
The Default included Launcher3 has internal rendering
For Nova: Go to its Settings => Desktop => Wallpaper Scrolling => Force, then set a wallpaper.
(You will see a black wallpaper if you're not using a launcher that can do internal rendering, If wallpaper is important and that you want to keep your current launcher, then switch back to the 1st setting)
Youtube
Depending on your network and tablet load, 720p videos might not play or take longer to buffer.
Switch to 480p in that case.
Some videos are also 720p60fps so you might need to switch back to 480p for these too.
You can also try an older youtube version and disable auto updates: youtube-v5.0.21
Google Play Movies
Our current Widevine DRM libs are not compatible in MM.
So you can't play a movie on the tablet with Google Play Movies as it requires that.
Starting a movie to play on chromecast should be fine as the drm will be the chromecast one in that case.
Now On Tap
Now On Tap requires the nano opengapps version, however our default /system partition is too small to accommodate them.
So if you want to install the nano or bigger opengapps version, you'll need to repartition the storage space first using Bigwheelie for extended partitions
Then activate Now on Tap from google now settings
Hardware keyboard layouts
More languages have been added in the default asusec keyboard
Set the keyboard layout through Settings => Language & Input => asusec => setup keyboard layouts
These also allow live switching without reboot with ctrl + space
Global Key Override/Shorcut Mecanism
Available in Settings => Dock => Add Key Override Actions
This will allow you not only to redefine function keys assignment, and other special keys actions,
but you'll also be able to assign global macro actions / app launch to any key + Meta key combination (shift Left or Right , ctrl..)
You can also add multiple actions to one key combination, simply click again on the "+" button for the same key combination.
For example if you want to assign to one key combination a list of action to run before going to bed for example, like: turn wifi off, Bluetooth off, mute sound, and turn screen off, you can do that
Note that starting multiple applications with one key is kinda a miss and hit for the moment due to some mecanism in android that seems to prevent applications to start too close to each others.
Storage (fstrim) and Database optimization:
Fstrim is native since 4.3 and will happen in the background if your tablet is idle / sleeping and that your battery is > 70%
There is also a script to run it manually in the rom: /etc/kat/optimizestorage
To optimize the Database: /etc/kat/optimizedb
To run both, open a terminal and run:
su
/etc/kat/optimize
MultiWindow
Multiwindow allows you to split the screen in 2, 3 or 4 panes
you can switch an app back and forth between multiwindow mode and regular mode while it's running
NavBar:
- To switch between full screen and split View you can use the
NavBar Buttons
The app that currently has the focus (or the latest used app if you're on the Desktop) will be used for the main pane (left and/or top depending on the mode and rotation)
And it will lay the remaining most recently used apps in the rest of the available 1-2-3 panes depending on the icon you click
- If you press a multiwindow icon again when in splitview mode, it'll bring the focused app back to fullscreen mode.
- To swap the 2 latest focused apps location / pane , long press on the
NavBar Button
- To change focus simply Tap on the app or use the
NavBar Button
That button can also be used in non multiwindow mode to switch quickly between the 2 most recent apps.
Global Actions:
Actions to switch the app between fullscreen / splitview 2-3-4 panes, swap, or switch between the 2 most recent apps have been added
so you can bind them to a key / key combination with the Global KeyOverride or long press on navbar button too.
Note: Most apps works ok in splitview mode, but some of them might crash or not refresh correctly sometime.
To manually position an app in one of the pane:
For the moment either reorder your apps before clicking on an auto mode icon,
or you can also activate the default Marshmallow Multiwindow mode to get extra icons to positions an app in a specific pane (activate it in developer options )
Then position the apps with the icons from the Recents screen. (default MM recents icons are for 2 or 4 panes)
Banners
First
Many thanks, Tim, for keeping the Tf101 alive!
I'm a little afraid to try, but I know I will
Officially my Transformer is one of the oldest devices I own and should really show its age.
But it just doesn't, it sets itself apart from the two other Tegra 2 devices (Notion Ink Adam and Acer Iconia) by being a thoroughly enjoyable device, which reacts very promptly to all input and still is mechanically perfect with great battery life.
Some hardware ingredients like DRAM and Flash seem to be made of better stuff (some benchmark show twice the memory bandwidth than Acer Iconia and NI Adam and the eMMC is lots better than Acer (Adam is notoriously terrible)), but mostly it must be the constant tweaking you (and Google?) have put in, because the performance only got better and better, even if the applications typically got fatter and fatter and 1GB of DRAM is no longer as plenty as it used to be with Android 2.2.
I surely can't say the same for my Nexus 7, which started being somewhat snappier than the Transformer and turned out pretty bad with LP even after turning off the journalling on ext4.
Marshmallow has disappointed me so far (only Nexus 10 migrated yet), mostly because my standard launcher SPB shell 3D no longer works on it and I just like it better than stock or any other.
And then I just don't see any significant improvements beyond Lollipop or rather CM 12 with all the privacy stuff already included. And I just love the fast task switching, which is part of the multiwindow support and which I have on a keyboard shortcut (hope it comes soon).
Somehow I also doubt that Nougat will be better in any sense except "better" Google integration.
But since I'm very much afraid of operating anything without the latest security patches, I'll just have to make the switch.
And I'm sure it will be as perfect as the current LP by the time Nougat comes out.
Thanks Timduru for making it possible
Link is ready, downloading :good:
Thank you. what I've failed to understand, do you need to install a separate root tool? Or is it included in the recommended recovery tool? It's still as i bought it in 2011... Thanks!
Thanks so much Tim gonna test this out
cwouter said:
Thank you. what I've failed to understand, do you need to install a separate root tool? Or is it included in the recommended recovery tool? It's still as i bought it in 2011... Thanks!
Click to expand...
Click to collapse
Just follow the procedure from the 1st post:
once you have the recovery installed:
the first time: format /data
then install all 3 zips at once: rom + supersu + gapps
then reboot.
Thank you Tim! Awesome as always. Gonna try ASAP.
One question...
What is the downside of not having omx codecs working?
xbs said:
Thank you Tim! Awesome as always. Gonna try ASAP.
One question...
What is the downside of not having omx codecs working?
Click to expand...
Click to collapse
No omx codecs means no gpu video acceleration, so it'll use cpu to decode instead.
Wait a bit before trying, 019b is coming fixing the reboots with some apps
New Version #019b
New rom version available: KatKiss-6.0_019b.zip
ChangeLog:
TF101:
- Fix reboots caused by some apps(ES file explorer, play music, youtube...)
- Fix ExFat support
TF101 KatKernel 122:
- net: Handle 'sk' being NULL in UID-based routing
- add native ExFat FS support
timduru said:
Just follow the procedure from the 1st post:
once you have the recovery installed:
the first time: format /data
then install all 3 zips at once: rom + supersu + gapps
then reboot.
Click to expand...
Click to collapse
It sounds so easy... First I don't really know how to install the recovery (hence, i have been spending 'only' app 7 hours on topic by now). I would assume from PWR+VOL- then Vol+ goes to recovery mode, but the device gets stuck with a android red expression mark. I then tried to install the Easyflasher 0.8.3 and managed to first delete the drivers and installed new universal ones. Rebooted and continue to follow the procedure and the Easyflasher on my Windows tells me i have successfully unbricked my Asus Stock. However, when i reboot, it looks all exactly the same, no data lost, no new installation. Then I could, or should?, flash a recovery. However, if i try to do it from the Easyflasher there is only the old TWRP 2.2.1. available and i fail to make use of the downloaded TWRP 2.8.1.1. CLick the Root, doesn't work either.
Then, the frustration goes up and the progress goes down... please advise and push me in the right direction! MUch appreciated!
cwouter said:
It sounds so easy... First I don't really know how to install the recovery (hence, i have been spending 'only' app 7 hours on topic by now). I would assume from PWR+VOL- then Vol+ goes to recovery mode, but the device gets stuck with a android red expression mark. I then tried to install the Easyflasher 0.8.3 and managed to first delete the drivers and installed new universal ones. Rebooted and continue to follow the procedure and the Easyflasher on my Windows tells me i have successfully unbricked my Asus Stock. However, when i reboot, it looks all exactly the same, no data lost, no new installation. Then I could, or should?, flash a recovery. However, if i try to do it from the Easyflasher there is only the old TWRP 2.2.1. available and i fail to make use of the downloaded TWRP 2.8.1.1. CLick the Root, doesn't work either.
Then, the frustration goes up and the progress goes down... please advise and push me in the right direction! MUch appreciated!
Click to expand...
Click to collapse
Installing the recovery is not really the focus of this thread, and it has been a really long time since I installed on mine
But what I would do, since you seem to have easyflasher and drivers working:
- Install TWRP 2.2.1 from easyflasher
- reboot to that TWRP 2.2.1
- Install the TWRP 2.8.1.1 flashable zip from TWRP 2.2.1
- reboot to the recovery and it should now be TWRP 2.8.1.1
Flashed all 3 zip ROM+su+pico but can't boot to Android.
After the Asus logo screen turns black and nothing happens.
Any ideas?
xbs said:
Flashed all 3 zip ROM+su+pico but can't boot to Android.
After the Asus logo screen turns black and nothing happens.
Any ideas?
Click to expand...
Click to collapse
sounds as if the new kernel didn't flash or something.
What recovery are you using ?
Even if the screen goes black you should get adb working after a few minutes, it's still doing things in the background normally.
Try to grab me a logcat + dmesg at that point.
EDIT: Found the problem, yeah kernel not flashing:
Flash it separatly for the moment: Tim_KatKernel_122_MM6.0.zip
that will be fixed in the next version.
xbs said:
Flashed all 3 zip ROM+su+pico but can't boot to Android.
After the Asus logo screen turns black and nothing happens.
Any ideas?
Click to expand...
Click to collapse
Unfortunately me too.
The only step from install note was the "Format" because of lack of time and data cable to copy everything from internal sd to my pc (only way for me is over the air with My Phone Explorer right now).
Tried 19 & 19b together with SuperSu 2.52 and gapps-arm-pico in one flash.
Backlight of screen is on, but then nothing happens over an hour.
---------- Post added at 13:46 ---------- Previous post was at 13:45 ----------
timduru said:
sounds as if the new kernel didn't flash or something.
What recovery are you using ?
Even if the screen goes black you should get adb working after a few minutes, it's still doing things in the background normally.
Try to grab me a logcat + dmesg at that point.
EDIT: Found the problem, yeah kernel not flashing:
Flash it separated for the moment: Tim_KatKernel_122_MM6.0.zip
that will be fixed in the next version.
Click to expand...
Click to collapse
Will do immediately!
---------- Post added at 14:00 ---------- Previous post was at 13:46 ----------
Just booted fine, into MM
New Version #019c
New rom version available: KatKiss-6.0_019c.zip
ChangeLog:
TF101:
- Fix Kernel not being installed
timduru said:
Installing the recovery is not really the focus of this thread, and it has been a really long time since I installed on mine
But what I would do, since you seem to have easyflasher and drivers working:
- Install TWRP 2.2.1 from easyflasher
- reboot to that TWRP 2.2.1
- Install the TWRP 2.8.1.1 flashable zip from TWRP 2.2.1
- reboot to the recovery and it should now be TWRP 2.8.1.1
Click to expand...
Click to collapse
Sounds like a plan, i tried and Easyflasher tells me it runs Wheelie,NV Flash then 'finished new reboot into recovery'. I do so, but android gets stuck in the recovery with an red expression mark, then it'll boot normal again.
Might it be that root access is blocking it? The Easyflasher root access tells me to first falsh recovery and put the superuser on sd.
I have installed both TWRP and SuperSu but both run into issues: the first tells me 'root is required' then closes, the second tells me 'no SU binary installed' then closes.
I then decided to go for a very crappy 1-click root access, see http://forum.xda-developers.com/showthread.php?t=1689193, with an even worse http://www.4shared.com/postDownload/ja5cFLAL/1-Click_Transformer_Root_11.html. This seems to have succeeded and i got root access (!) and the above described issues on TWRP and SuperSu were not gone.
Then in TWRP i couldn't select the zipfile TWRP 2.8.1, and after telling TWRP i had a TF101 i could select an older version like 2.3, which he was going to download. I had to confirm a path but decided to abort. I then tried to boot recovery but unfortunately, and not as i expected, it run into the same red expression mark. I then decided to run APX mode again and see if easyflasher could access root now. Also negative. Then run normal ABD mode and checked if i could do something with SuperSu, also negative.
So it seems my problem is that TWRP doesn't allow me to select the right zip file and as a result i can't run any recovery... any idea?
UPDATE: going back to apx flash the default TWRP2.2.1 then reboot to recovery succeeds in Easyflasher but the same red expression mark with Android. so also negative
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V 3.0 - EMUI 8.0DONOT COPY MY WORK, Ask for Permissions
Code:
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
with all versions, P20 lite, remember to know your original compilation if at any time you want to return to stock for example ANE-LX3C25 with this data you can return to stock.
This version is based on the official modification of EMUI, activating functions that are in the high-end versions, adding some modifications for their better performance.
REQUIREMENTS:
- EMUI 8.0.0
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows-linux
Guard the rom in an external memory.
Turn off the cell phone press the plus and power buttons until you have the TWRP window
Press WIPE
Press FORMAT DATA
Write the word "yes" without quotes and accept, just do the work
Press BACK to go back several times to the main window.
Press WIPE, then ADVANCE WIPE
Verify that the partition DATA this in the f2fs extension
Mark: Dalvik, cache, data, internal storage, system
IMPORTANT !: do not mark "micro sdcard".
Once you have marked, slide the "swipe to wipe" arrow to clear it.
Go back to the main sale, press INSTALL
Press SELECT STORAGE
Switch to Micro SDCard to find the rom.
Look for the MORFUZ rom and flash
At the end of the installation press "wipe davilk-cache", wait for it to finish.
Reboot system.
Congratulations now will start the rom MORFUZ
It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
-IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
https://mega.nz/#!F7oXzSRZ!8uuSCIx4UTbuWkTEYoFmTXTCwvIr6Reuc1vyq6OIhw0
Rom Siriuz
https://mega.nz/#!tYBjTQhC!yPbPXkazpQUy7bzLdm33rEapihBB8iVmSGlGxy1RweI
TWRP Mod by catuva21 - VERSION 2
unzip, the file is automatic
https://mega.nz/#!uD4FlCqL!ERBzP4ZWa2sR8f_wnn15F_cOFCdYVKgfYETjiehQkkQ
TELEGRAM GROUP
https://t.me/joinchat/ERAhfQ8kyF6_iH5nMun5dg
Contributors:
CATUVA21
Credits:
- Openkirin Recovery TWRP
- Alexxx1
- Chisetdel31260
ROM OS Version: ANE-L
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-06-30
Last Updated on: 2018-09-10
DESCRIPTION ROM SIRIUZDETAILS OF THE ROM
SIRIUZ 3.0
- Base firmware P20 lite (security patch for September).
- Custom kernel MorfuZ now works wifi and bluetooth.
- Huawei ID integrated and running.
- New bootanimation.
- New bootlogo.
- Percentage activated from start, for other models.
- Activated the font change in themes.
- New topics.
- 7 themes to change the font customization.
- Yorreciones de camara.
- Youtube advance updated.
- Adaway ad blocker.
- VolTe Activated.
- Magisk 17.1
SIRIUZ 2.6
- P20 lite base firmware (August security patch).
- MorfuzKernel 2.1 selinux Permissive.
- Turbo GPU.
- Added support init.d.
- Added busybox.
- Huawei ID back.
- Boot profile for the Darknnes-Blu_Active kernel within init.d improves performance.
- Change of the MTweaks auditor kernel application.
- Added Lent AR fun camera function.
- Magisk 16.7.
- Increase bitrate of photos and video, improve quality.
- Application of return mail.
- Youtube Mod Updated.
- New Gboard keyboard.
SIRIUZ 2.4
-Base firmware P20 lite(security patch jun).
-Activated Dual Speaker.
-Added DolbyAtmos in Music.
-New Boot logo.
-Added custom watermark for the P20 lite.
-Now without patches.
-Installation mode AROMA-INSTALLER.
-Music: stock or crack.
-Camera: stock, Mate10Pro or P20Pro.
-Root: Magisk or Supersu.
-Navbar, Use the fingerprint sensor as a navigation bar.
-Solid explorer, Kernel Auditor, Quick Reboot.
-MxPlayer.
-Sony Music.
-Eliminated the data space.
-Deodexed (improves optimization).
-Improvements in the quality of photos, video and sound..
-It eliminated unnecessary google applications.
-Added Call Recorder.
-Added Youtube Mod (function in the background).
-Activated multi-user X5.
-Keyboard change, google.
-Reduction of size of icons.
-Activated glove mode.
-Mtu 1500.
-Explored files improved.
-Added main screen design 5x5,5x6,6x5.
-Added more applications of social networks of Twin cloning.
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office
r2
when i go to security options settings app crashes
cant setup fingerprint id
oh now it works after playing with the instalation settings
I got an error during installation and start bootlooping, latter with more time I'll try again.
Thanks to share your work with us.
Error finishing the installation:
set_perm: some changes failed
Other problems:
-Does not detect micro sd
-You can not configure a screen lock method (settings close when you try to enter that section)
-Developer options can not be activated (the settings are closed when you press compile)
Those problems are what happened to me, I followed the installation instructions exactly as it says in the post
same problem with me
brandox0 said:
Error finishing the installation:
set_perm: some changes failed
Other problems:
-Does not detect micro sd
-You can not configure a screen lock method (settings close when you try to enter that section)
-Developer options can not be activated (the settings are closed when you press compile)
Those problems are what happened to me, I followed the installation instructions exactly as it says in the post
Click to expand...
Click to collapse
The rom is working or not?
thanks for the rom!
followed the install instructions except i didn't install the TWRP321_OREO_P20LITE.rar because i previously installed it following these instructions.
chose to install the custom kernel and SuperSU. not sure right now what else. i will write it down when i try the next build.
i encountered the following issues:
-error finishing the installation: set_perm: some changes failed during flashing (could this be because i didn't install your modded TWRP?)
-unable to set the lockscreen options
-unable to set up fingerprintid
-settings crashes when attempting to enable dev options
-sd card isn't detected within the fw
once i saw the sdcard isn't detected, i tried to recover from my latest backup but TWRP wasn't able because /system was only mounted as read-only (could this be as well because i didn't install your modded TWRP?).
ended up having to reflash stock from erecovery, rerooting and reinstalling TWRP in order to restore from my last backup (maybe i did something wrong?).
after reading the features list, i personally would use it as my main rom. i'd love to see it with viper4android included and with an all dark theme though but that's just me.
thanks for your work! looking forward to more!
luigi997 said:
The rom is working or not?
Click to expand...
Click to collapse
Well, if you eliminate the fact that the fingerprint reader or any other screen lock method does not work, you can not use the micro sd and the developer options are not available. So yes, the rom works.
You can try to urge it, maybe you're lucky and do not have mistakes.
brandox0 said:
Well, if you eliminate the fact that the fingerprint reader or any other screen lock method does not work, you can not use the micro sd and the developer options are not available. So yes, the rom works.
You can try to urge it, maybe you're lucky and do not have mistakes.
Click to expand...
Click to collapse
If i try to uninstall an app, the system reboot.
I've installed the modded kernel
Anyone with no issues? Can be used as a daily driver?
Please report back testers ^_^
[email protected] said:
Anyone with no issues? Can be used as a daily driver?
Please report back testers ^_^
Click to expand...
Click to collapse
Nope, so far I haven't seen anyone reporting positively. No fingerprintid and no security features makes the rom pretty much unusable as far as I've tested and seen on the thread. I'm awaiting to see how this develops..
Success
This rom is working prefectly.. i have keep on trying to re install the rom.I always follow the exact instruction, and i have found out. You will have a set_perm: some changes failed. IF you mark check the navbar, and status bar while in aroma installer.. I have able to use everything. Ill try to make a screenshot of it.
riorabel12 said:
This rom is working prefectly.. i have keep on trying to re install the rom.I always follow the exact instruction, and i have found out. You will have a set_perm: some changes failed. IF you mark check the navbar, and status bar while in aroma installer.. I have able to use everything. Ill try to make a screenshot of it.
Click to expand...
Click to collapse
Awesome! I'll try again!
Did you flash the recovery included in the post?
What do you mean with "If you mark check the navbar, and status bar while in aroma installer"?
Thanks for the feedback!
madalone said:
Awesome! I'll try again!
Did you flash the recovery included in the post?
What do you mean with "If you mark check the navbar, and status bar while in aroma installer"?
Thanks for the feedback!
Click to expand...
Click to collapse
YES. I HAVE FLASH THE RECOVERY. AND WHEN YOU FIRST DO THAT... AND YOU SHOULD PUT THE ROM INTO YOUR SD CARD..
YES, IF YOU MARK CHECK THE NAVBAR ANF STATSBAR. WHILE CHOOSING YOUR DESIRED APPS. YOU WILL SEE THAT IN THE VERY LAST PAGE OF THE AROMA INSTALLER. WHERE YOU HAVE THE OPTIONS. NAVBAR STATSBAR, SOLID EXPLORER, KERNEL AUDIATOR, AND the QUICK REBOOT. SO JUST MARK CHECK THE SOLID EXPLORER,KERNELAUDITOR,AND QUICK REBOOT..
SO TRY IT NOW. AND GIVE ME SOME FEEDBACK IF IT WORKS IN YOU. ALSO KINDLY TRY TO DO A SCREENSHOT. I DONT HAVE OTHER PHONE TO TAKE A SHOT ON IT. KUDOS THANKS
ok so i flashed the provided recovery and the rom following the instructions with the following options in aroma installer:
Kernel: Morfu2kernel
Root: SuperSU
Camera: P20 Pro
Music: Stock
Kernel Auditor
Quick Reboot
the installation went through except bootimage patcher failed at decompressing ramdisk (failure, aborting).
edit1: after a cache wipe, i rebooted the phone. the phone boots but no root.
tried to flash SuperSU through TWRP but failed.
wiped data/cache/dalvik/system & reflashed rom with Stock kernel & Magisk no bootimage patcher errors. after a cache wipe, rebooted & phone has root :victory:
brandox0 said:
I also want to try again, but I'm still not sure.
So far, how is the rom working? Is there a fault signal mentioned above?
Click to expand...
Click to collapse
so far i'm still getting all my apps installed. i'll letcha know how i get on with it.
edit2: as i am stubborn, i reflashed the rom with the custom kernel and Magisk. root is on and the phone seems to run smoothly.
madalone said:
ok so i flashed the provided recovery and the rom following the instructions with the following options in aroma installer:
Kernel: Morfu2kernel
Root: SuperSU
Camera: P20 Pro
Music: Stock
Kernel Auditor
Quick Reboot
the installation went through except bootimage patcher failed at decompressing ramdisk (failure, aborting). is that the kernel failing to install?
after a cache wipe, i rebooted the phone. the phone boots as expected.
Click to expand...
Click to collapse
I also want to try again, but I'm still not sure.
So far, how is the rom working? Is there a fault signal mentioned above?
madalone said:
ok so i flashed the provided recovery and the rom following the instructions with the following options in aroma installer:
Kernel: Morfu2kernel
Root: SuperSU
Camera: P20 Pro
Music: Stock
Kernel Auditor
Quick Reboot
the installation went through except bootimage patcher failed at decompressing ramdisk (failure, aborting).
edit1: after a cache wipe, i rebooted the phone. the phone boots but no root.
tried to flash SuperSU through TWRP but failed.
wiped data/cache/dalvik/system & reflashed rom with Stock kernel & Magisk no bootimage patcher errors. after a cache wipe, rebooted & phone has root :victory:
so far i'm still getting all my apps installed. i'll letcha know how i get on with it.
Click to expand...
Click to collapse
I worked perfectly, the only problem is that mobile became very slow.
rapza4 said:
I worked perfectly, the only problem is that mobile became very slow.
Click to expand...
Click to collapse
i had that plus overheating but after what i did in edit2 it was gone and the phone runs smoothly.
on another note: is it possible to make this rom have init.d support somehow? it'd be cool for stuff like Liveboot..
STOCK ROMS
ZUI 11.1.053
Target version: L78011_CN_OPEN_USER_Q00026.0_P_ZUI_11.1.053_ST_190731_qpst
basic version: ZUI_11.1.053
Size: 3.42gb
Link: https://mega.nz/file/YzwUTCwJ#j1v7lTO7Ivokgr2fkSnny5wB01nqCWm4TZu2hUK5xxE
ZUI 4.0.474
Target version: Lenovo_Z5_L78011_CN_OPEN_USER_Q00016.0_O_ZUI_4.0.474_ST_190118_QPST
basic version: ZUI_4.0.474
Size: 3.00gb
Link: https://drive.google.com/file/d/1F0VtbBfxoLdukGMytq8SslcWjqcsLABQ/view?usp=sharing
OFFICIAL ROMS & UPDATES
Target version: 10.5.306
basic version: 10.5.254
upgrade package size: 127.04 Mb & 3.36gb
View attachment 4773407
Applicable models: Lenovo Z5 (L78011)
Upgrade point of view
Support Unicom VoLTE;
Update Lenovo mobile phone customer service hotline number: 400-990-8888;
System Optimization
Fix the problem that the probability of the compass cannot be calibrated;
Fixed WeChat 7.0 avatar and received a message without a prompt tone;
Fix the problem that the HDR icon is also displayed under the HDR close finder frame;
Fix the problem of finding the mobile phone emergency contact does not support segment 166;
Fix the problem of flashback after clicking the QQ flashback after the end of the nighttime extreme power saving;
After the OTA upgrade is fixed, the default theme preview interface is different from other preview interfaces.
Fix the problem that the game volume function cannot be called up when the game voice function is enabled in the game interface;
Fix the problem that the three-letter X-Y-Z on the right side of the address book is manually clicked;
After repairing and unplugging the SD card formatted as internal storage, the "missing SD card device" notification cannot be clicked, causing the internal storage of the mobile phone to be unmounted;
Fix the different carrier card settings. After calling the main card, enter the contact - click any contact - long press the contact number to display the problem that the card 1 or card 2 operator call does not match the actual card location.
Precautions
Please make sure that the phone have a lot of power, power and storage space;
If you have problems with the upgrade, please go to the official Lenovo community for help.
The upgrade process may cause the phone to heat up or consume power for a short period of time. It is recommended that you restart the system again after the upgrade to obtain a stable experience.
DOWNLOAD LINK AFH Link : Chinese Web Link
Full ROM link (3.36GB):- Mega Drive
RETURN FROM CUSTOM to OFFICIAL ROM
Now returning to STOCK is possible
METHOD 1 (RESTORE TWRP BACKUP)
1. Download the TWRP back up of ZUI 4.0.474 from AFH & the Official ZUI 4.0.474
2. Unzip it (Its actually a 2.5 GB compressed file).
3. Now Boot into TWRP.
4. Now connect the mobile from PC and check the Root directory for TWRP>>BACKUPS
5. Make a new folder by name "cd6d6a03 ( change it with the name of your devices, can easily be checked via fastboot devices command) "
6. Put the extracted backup into that folder.
7. Wipe Dalvik,Cache and System.
8. Restore the backup. (Dont worry it will not BOOT your Z5)
9. Now POWER off the mobile.
10. Move to Qfill Mode (Press both VOLUME up+ Down and POwer button).
11. Connect to PC and Restore the Official Rom through QPST.
No more Sahara or Out of Memory error,........................ENJOY
METHOD 2 (TWRP FLASHABLE ROOTED ROM)
Download link: Mega Drive
Method to Flash this rom
Method 1:
1. Download the Zip package
2. Put it into SD Card
3. Boot into TWRP
4. Clear the Cache,Dalvik,Data & System.
5. Flash the package Normally
6. enjoy the Rooted Official PIE.
Method 2:
1. Download the package
2. Unzip it
3. Run the Flash.exe in given archive
4. Check the attachment to learn the Chinese exe meaning
5. enjoy the Rooted Official PIE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
METHOD 3 (FOR those who were on ZUI-10 & for going Back to ZUI 10)
Method back to Stock ZUI 10:
1: Flash Stock ZUI 10.5.254 via Qfil
2: Flash TWRP 10.5.254 via Fastboot
3: Flash this rom via Fastboot
Link: https://mirrors.lolinet.com/firmware/gsi/ZUI-AB-9-20190616-ErfanGSI.img.7z
4: Go to Twrp then wipe data. After wipe data choose Reboot System and wait 1 or 2 minutes.
(Your phone will stuck in Lenovo red logo).
5: Flash Stock ZUI 10.5.254 again via Qfil.
==you are completed back to ZUI 10.5.254==
OFFICIAL ROMS
10.5.254 [FINAL] for LENOVO Z5 Android P
ZUI version: 10.5.254
adapter model: L78011
Android version: 9.0
Brush type: QPST/DIRECT over 4.0.474
Compression package size: 3.36G
Package name: L78011_CN_OPEN_USER_Q00025.0_P_ZUI_10.5.254_ST_190404_qpst.zip
WHATS NEW
(fixed or changed issue with the previous one has been released Software comparison):
1. Add new application lock to support face unlocking mode;
2. Add U health camera to recognize calorie function;
3. New negative one-screen card display, support step counter / commute recommendation / fast payment, etc.;
4 New desktop editing mode, support more desktop layout, please press and hold on the desktop to enter the view;
5, the new control center and the notification bar are integrated, and support the desktop to slide out the global search;
6, the new U-touch gesture, Cut everything to turn on the flashlight and turn it around to turn on the camera, please check it in Settings->4D U-touch;
7. Fix the problem of background sound break of the game;
8. Fix the problem that the shutdown charge cannot be extinguished;
9. Repair the upgrade process phone stopped running problem of sporadic;
10, automatic optimization of backlight brightness curve, the backlight is too bright indoor solve the problem;
11, repair slip cut back on the desktop screen shot Small window interface stuck, unable to withdraw from the problem;
12, repair ultra-definition mode watching videos / landscape orientation games, even now question the status bar displays black bars;
13, is in the pocket repair mode, frequently light off screen calls Face Detecting problems that cause the phone to heat up;
14, repair power-saving mode / night power-saving open, even after a long standby, the APP can not access the Internet;
15, repair the call screen in the state of the call, press the power button to press the screen repeatedly, the caller animation does not display The problem;
16, repair even now through the fire line / gun warrior / stimulating the battlefield game interface screen brightness suddenly dimmed, the notification bar brightness adjustment is invalid.
Links credits to @ gfofanov
https://mega.nz/#!vuoA0SbJ!6HuGdtaNDV4XzNZbOeWB9fDiiP64kbcbo36_4j-8k-4
https://drive.google.com/file/d/10vJrO1-_-VdIV5rfhbYDuc6dUgxkoyjF/edit
New URLs:
https://mirrors.lolinet.com/firmware/lenovo/l78011/L78011_CN_OPEN_USER_Q00025.0_P_ZUI_10.5.254_ST_190404_qpst.zip
AND
https://office300-my.sharepoint.com/:u:/g/personal/fofanov_office300_onmicrosoft_com/EWzxvMBijR5Dk__iWz8RYuoB6rJ8jvNQjcdXts7J1UCQcg?e=pckW58
CUSTOM ROMS
MIUI
MIUI 10 [9.5.9] for LENOVO Z5 Android P Credits to Art Chen
Everything is working except Face Unlock
…….Images in attachment
https://mega.nz/#!YiB0XIJC!aykBuDqWxQWsbWc0kcNnBhtHy_5eqDO1Giw_avvj2WQ
MIUI 10 [9.3.14]17th March 2019 Update for LENOVO Z5 Android P Credits to Art Chen
his is already the third edition. @Art_Chen The author is still very diligent. Now I
have fixed the following problems:
Optimize the fluency of the system (the overall use is smoother, the gesture operation does not drop frames) to
improve the stability of the system (from Android 8.1 Upgraded to Android 9)
Fixed several bugs (fixed volte not available, aptX audio no sound, etc.)
https://drive.google.com/drive/folders/1NdveI-miKPs6RDf9yH9HIwDgJrkkWi5F
GDrive Link
MIUI 10 [9.2.21] for LENOVO Z5 Android P Credits to Art Chen
his is already the third edition. @Art_Chen The author is still very diligent. Now I
have fixed the following problems:
Optimize the fluency of the system (the overall use is smoother, the gesture operation does not drop frames) to
improve the stability of the system (from Android 8.1 Upgraded to Android 9)
Fixed several bugs (fixed volte not available, aptX audio no sound, etc.)
A small number of known bugs: fingerprint payment is not available (can be used with Tai Chi or Ed Xposed), there may be some bugs but I am temporarily
Didn't find Batterey Drain
Fix gps , theme , lockscreen wallpaper
If you are using miui, Update don't need to clear the data
DOWNLOAD:-
https://mega.nz/#!6rwQjA6B!z2xdnixiyCt5us6Cjeh9mIkgnqR4jnRLoiyZwt2Mink
BlueTooth Patch (Only if not working)
GDrive Link
MIUI 9.1.31 for LENOVO Z5 Android OREO Credits to Art Chen
Whats in this ZIP?
[attachment="15308074:miui.jpg"]
Download Link
Google Drive Link
BlueTooth Patch (Only if not working)
GDrive Link
BUGS:- No (If found Bluetooth issue use above given patch)
METHOD for FLASHING
1. Tools inside use them
2. OR use TWRP.
use at your own risk
Click to expand...
Click to collapse
PIXEL EXPERIENCE
* PE (10-05-2019): https://mega.nz/#!M65R0Qwa!OhxqBiOuU...cTXiQTTSIoGQdE
Bugs: Just Charging light else is clear
* PE (22-05-2019): https://mega.nz/#!9hxzBCjZ!QgoiTDZXOoAhHXDFWZ3GkBPrFPN2V7qlzLQt855ZLIw
Bugs: Just Charging light else is clear
* PE (06-06-2019): https://mega.nz/#!m3oVRaBY!KfFAG6mHiVsQCz2N1SixAHjg5GFaZbaRe-JO3Bz0CEg
Bugs: Just Charging light else is clear
* PE (18-06-2019): https://mega.nz/#!9xBD1AJB!atWWvl_0nXFXQxYT1gHjg9rzX6Kpqivtd7lawX_sEuw
Bugs: Just Charging light else is clear
************************************************************************
RESCRUSSION REMIX
* RR (16-04-2019): https://mega.nz/#!43hRxYJR!hwKWkOt3S...auq-EXSu7IrN8s
Bugs: Just Charging light else is clear
* RR (24-05-2019): https://www.androidfilehost.com/?fid=6006931924117883160
Bugs: Just Charging light else is clear
* RR (15-06-2019): https://drive.google.com/open?id=1p3d-itVhjkI4TdDZLzQSewHPAin6Y3R_
Bugs: Just Charging light else is clear
************************************************************************
HAVOC-OFFICIAL (No GApps)
Havoc-OS v2.6 Official Build (Credits to developer)
What's New (google translator):
* Added double tap for wake-up (must be supported by device / kernel)
* Added call recording to Dialer
* Added toggle switch for A -GPS
* Reduced minimum brightness
* Mi9 / Mi9SE fingerprints re-added to display (FOD)
* Added overlay (see OP) to enable cutout controller (hide label, ...)
* HAVOC (12-06-2019): Download Link
USEFUL BEFORE INSTLLATION
1. use 3.2.3 TWRP recovery for 4.0.474 (Link Here)
2. Flashed the same Boot Image on Partition A & B. (Boot + Vendor Image)
3. Than the Same Vendor Image.
FLASHING PROCEDURE
1 . Download TWR.img ( only single file now dont worry ) copy in one folder
2. connect phone to pc boot your phone to download mode
3. open cmd in that folder
4. type adb devices
5. type fastboot boot twrp.img for temporary if you want permenant fastboot flash boot twrp.img
6. fastboot reboot
7. now wipe everything
8. now flash the rom
9. remeber if you are on slot a rom will install on slot b and press reboot to recovery again after installing rom and now switch to slot b and select reboot system now your phone boots to slot b
10. if you are on slot b rom will install on slot a and press reboot to recovery again after installing rom and now switch to slot a and select reboot system now your phone boots to slot a
11. congratulations .
OTHERS/BETAs
10.5.254 [BETA 5] for LENOVO Z5 still BETA Android P
Applicable models: Lenovo Z5 (L78011)
Target version: 10.5.254 or higher
Basic version: 4.0.474/10.5.223
Upgrade package size: 90 Mb almost
push status: Public
following is the update content of 253 version.
will share Later
Download Links:- G-Drive credits to @M.Z.F
10.5.248 [BETA 4] for LENOVO Z5 still BETA Android P
Applicable models: Lenovo Z5 (L78011)
Target version: 10.5.248 or higher
Basic version: 4.0.474/10.5.223
Upgrade package size: 140 Mb
push status: Grayscale push
following is the update content of 248 version.
Fix the problem of background sound break of the game;
fix the problem that the shutdown charge cannot be extinguished;
fix the problem that the occasional phone stops running during the upgrade process;
fix the post-upgrade settings -> display And the problem of no brightness mode;
fix the problem that the camera menu is hidden after the top of the screen is displayed;
optimize the automatic brightness backlight curve to solve the problem of over-brightness in the room;
repair the activation of the overseas Internet, prompt to select the data master Card problem;
fix super clear mode to watch video, horizontal screen game, occasional status bar shows black bar problem;
repair connection Bluetooth After the headset dials the WeChat voice/video call, both sides have silent problems;
fix the called call in the lock screen state, press the power button multiple times to turn off the screen, the caller animation does not display the problem.
Download Links:- CloudMail credits to @gfofanov
ZUI 10.5.23 [BETA 3] for LENOVO Z5 still BETA Android P
Applicable models: Lenovo Z5 (L78011)
Target version: 10.5.230 or higher
Basic version: 4.0.474/10.5.223
Upgrade package size: 1.49 Gb
push status: Grayscale push
Upgrade the point of view
Upgrade Android 9.0 system;
new face recognition solution, need to re-enter facial information in settings -> password, fingerprint and face recognition;
new ZUI10 design style, add 4D U-touch gestures, magic input box, small window broadcast Video and other functions;
system optimization
New nighttime extreme power saving;
new application lock to support face unlocking mode;
new U health camera recognition calorie function;
new negative one-screen card display, support for step/off-work advice/fast payment, etc. ;
new desktop editing mode, support more desktop layout, please see the press to enter the desktop long;
the new control center and notification bar integration, and support on the desktop slide to bring up the global search;
new U-touch gestures, cut everything open flashlight Turn the camera on and turn it around, check in Settings -> 4D U-touch.
Download Links:- CloudMail - : - Mega
ZUI 10 (ported) for LENOVO Z5 Android OREO Credits to Ketai
I understand from guglotransleyta (but it's not exact):
Launcher 5.0 http://4pda.ru/pages/go/?u=https://...LrMKEhvRh0DVNwjccXmsIS3sCBb_AOCAvE&e=81841256
launcher 10.0 http://4pda.ru/pages/go/?u=https://...Dcu3z8zrAdTFCAiIopeOpKnjyf70vI7wYw&e=81841256
Firmware 3.9.075 https%3A%2F%2Fyadi.sk%2Fd%2FHHqqn2P73Zkmpn&e=75597985 (Password for archive: w3bsit3-dns.com)
Firmware 5.0 http://4pda.ru/pages/go/?u=https://...0cO7LPUOMAgwBrhHEyl8ofGvCycokfHbZU&e=81841256
Firmware 10.0 http://4pda.ru/pages/go/?u=https://...0pyMvNo3ckYJSnNm5Hdyqtrwh2NDbF6FCg&e=81841256
As I understand it, there should be 075 with the unlocking bootloader.
Those. The boot-loader is unlocked, debugging is enabled, then into the fastboot and we sew, the batch file in Chinese is full.
Steps:
1. Flash 3.9.075 via QPST (if you already have 3.9.075 leave this step)
2. Unlock Bootloader.
3. Flash TWRP.
4. Flash ZUI 5.
5. Flash ZUI 10
DONE!
BUGS:- None till now
Everything is at your own risk, I did not set myself.
Some link was such a translate in
https: //club.lenovo.co...hread-5412231-1-1.html
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON
How to FLASH MIUI/OTHER ROMS?
Always make a backup first. and copy the rom in your mobile
1. Boot into TWRP (means you must have bootloader unlocked and only 3.9.075 & 3.9.500 are capable to unlock bootloader)
2. Now in TWRP wipe the cache and dalvik with system
3. (a). Switch to IMG mode in TWRP.
(b). There are 3 image files in the downloaded ZIP folder named as images ( patched_boot,System & Vendor)
4. first flash System, than Vendor and last patch.
5. Done & REBOOT (it might said no ROM installed ignore it.
MIUI 10 is the only rom after flashing it you can go back to stock.
How to FLASH OFFICIAL ZUI 10.5.230?
1. Download
2. Upload to the root of the root memory
3. Rename the package to update.zip
4. Update it in 3 dots above in the official update application.
--------------------------------------------------------------------------------------------------------
wana GO BACK to STOCK from CUSTOM? Follow this post
TWRP for PIE? Follow this post
--------------------------------------------------------------------------------------------------------
Problems & There Solutions.
1. Have you ever get annoying thing like Insufficient storage to flash. Well today, for A/B device, we have got a the great guide for you!
http://oxygenosguide.lunarixus.party
* Notes that re-partitioning your device may cause the damages to your device. Do at your own risk!
* DO NOT TRY ON MOTO DEVICE!
Register your devices at this link to get the Z5 stable updates early than others
https://www.wjx.top/m/25027506.aspx
25-03-2019 : Update Official PIE ZUI 10.5.230 added
29-03-2019 : Update Official PIE ZUI 10.5.248 added
11-04-2019 : Update Official PIE ZUI 10.5.254 added
17-04-2019 : MIUI 10 [9.3.14] 17th March 2019 Update for LENOVO Z5 added
09-05-2019 : MIUI 10 [9.5.9] 9th May 2019 Update for LENOVO Z5 added
17-05-2019 : PE & RR [9.3.14] April & May updates Update for LENOVO Z5 added
19-05-2019 : Link for RETURNing FROM CUSTOM to OFFICIAL ROM added.
20-05-2019 : Link for backup of OFFCIAL ROM via TWRP added.
30-05-2019 : Link for RR update added.
08-06-2019 : Uploaded the official 10.5.306
14-06-2019 : Uploaded PE new Update.
15-06-2019 : Uploaded PE new Update.
16-06-2019 : Uploaded HAVOC OS official for Z5.
17-06-2019 : New Method for Returning to STOCK ZUI-10 added.(FOR those who were on ZUI-10 & for going Back to ZUI 10)
22-06-2019 : Uploaded 10.5.306 official full ROM for Z5.
23-06-2019 : Uploaded PixelExperience update for Z5.
30-05-2020 : Uploaded Stock Rom ZUI_4.0.4.74 update for Z5.
Miui
M.Z.F said:
Reserved
Click to expand...
Click to collapse
Miui rom is chinese rom. I wanna EU Rom. Please update EU Rom
1}
FLYME 7 for LENOVO Z5 Android OREO
will be posted later
.........
= When is FlyMe available?
2}
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON.............
= How do you know this and When is it officialy coming out?
3}
Do you have some screenshots of this Zui 10?
xperia_bird said:
1}
FLYME 7 for LENOVO Z5 Android OREO
will be posted later
.........
= When is FlyMe available?
2}
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON.............
= How do you know this and When is it officialy coming out?
3}
Do you have some screenshots of this Zui 10?
Click to expand...
Click to collapse
yes Flyme is vailable but very buggy thats why did not share over here.
xperia_bird said:
1}
MODS PLEASE MAKE NEW SECTION FOR LENOVO Z5 DEVELOPMENT AS OFFICIAL PIE IS ARRIVING SOON.............
= How do you know this and When is it officialy coming out?
Click to expand...
Click to collapse
Beta Testing is in progress for official 9.
M.Z.F said:
Beta Testing is in progress for official 9.
Click to expand...
Click to collapse
Thats great! Can you give a timeline?
This custom ROM, is it also valid for the Lenovo Z5s L78071?
Wait for final release Pie.
hi,
is miui rom multi language rom?
raccoon616 said:
This custom ROM, is it also valid for the Lenovo Z5s L78071?
Click to expand...
Click to collapse
Noo
xperia_bird said:
These are not flashable ZIP files, you need to flash this with Fastboot. Please put this in your post, at least how to flash the files in the right way. Also the batch file in the ZIP is not readable by cmd.
I tryed your flashing steps and now the phone is not booting.
Click to expand...
Click to collapse
check OP
erdogan69 said:
hi,
is miui rom multi language rom?
Click to expand...
Click to collapse
Only CHINESE & ENGLISH
this is awesome MZF, can i use your download links in this thread ? I need to create a tutorial for going back to stock.
https://forum.xda-developers.com/pr...-how-to-flash-android-8-1-9-0-t3840839/page87
rendroid15 said:
this is awesome MZF, can i use your download links in this thread ? I need to create a tutorial for going back to stock.
https://forum.xda-developers.com/pr...-how-to-flash-android-8-1-9-0-t3840839/page87
Click to expand...
Click to collapse
For sure
MIUI 10 is the only rom after flashing it you can go back to stock. (Personally tested)
M.Z.F said:
For sure
MIUI 10 is the only rom after flashing it you can go back to stock. (Personally tested)
Click to expand...
Click to collapse
thank you for your work.
i tested first with zui5 and then zui10 they both booted successfully, the only problem i am facing is that vendor and persist doesnt mount, hence mobile network and wifi is not available, and you cant move past the activation screen, so i am working on that
it looks like it is not being mounted because of encryption, so i am force mounting it by flashing it in twrp.
I can't copy MUIU file to internal storage, it says file limit larger than device limit ?
It's more than 4gb
I am on Pie 9. Is that true if i flash MIUI 10, then using QFIL to flash stock Rom, and i can go back to stock???
creedsbg said:
I can't copy MUIU file to internal storage, it says file limit larger than device limit ?
It's more than 4gb
Click to expand...
Click to collapse
Copy it on usb or mmc or format your device on NTFS format FAT file system dosbnot support larger files.
vosathanh said:
I am on Pie 9. Is that true if i flash MIUI 10, then using QFIL to flash stock Rom, and i can go back to stock???
Click to expand...
Click to collapse
i did it and i was a lucky man. :good: