Here Is TWRP Recovery For Xolo Cube 5.0 Ported By ME :highfive::fingers-crossed:
Flash Using Any Flashable Tools like Mobile Uncle Tools, Rashr, Any other Apps which Can Flash the Recovery
Root your device first device To Flash the Recovery By Using Mobile Only
or Use Sp Flashing Tools To Flash With PC No Root Required
Recovery Status:
Staus:Beta
Recovery version:v2.8.2.0
Tested On:Xolo Cube 5.0 2Gb model
Download Recovery From Below Link
or attachment
https://drive.google.com/open?id=0B_jYBGz2q7lAM2dJMWdfWG1GcUE
Please sir, develop android nought or Oreo ROM for Xolo cube 5.0 2gb
Not downloading
********Root twrp Symphony P6 Pro*************
i just found twrp Recovery for Symphony p6 pro, follow instruction correctly and Do Always on own Risk,
hit thanks If this helpful For you,
Instructions-
Download recovery img From below
Run Sp Flash tool load Scatter From recovery folder
Check recovery only load twrp and then flash
without pc-
Root via kingroot [yes working tested]
Download flashify apk from playstore
backup stock recovery and boot.img
load twrp.img click flash Done,
Rooting via twrp-
flash update supersu.zip through twrp
Done.
Downloads-
Here
Leagoo M5 Edge Development and Support-
Basic Device Details-
Display- 5 inch
OS- android 6.0
Chipset - mediatek MT6737M
RAM- 2GB
Disclaimer-
Code:
i am not Responsible for any damage to Your Device..
official Firmware-
http://www.mediafire.com/file/0cdwko6i2rve43r/Leagoo_M5_Edge_4G_MT6737M_20170322_6.0.zip
twrp-
SP flash tools and Driver-
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Magisk-
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
extras-
Greenify for Battery-
http://m.hiapphere.com/apk-com.oasisfeng.greenify
Guide-
Flash Firmware-
1. Install Vcom Driver Run SP flash tools, Load Scatter File , Check Everything and then click Download, as soon as connect your Switched off Phone.
Flash twrp-
Same as firmware just Check Recovery only, under Recovery section Load twrp and then click Download, as soon as connect your Switched off Phone.
Root-
flash magisk via twrp. or you can also use Supersu 2.78XX.
I'm following your steps right now. I've found in my phone the Triada trojan (thread here: https://forum.xda-developers.com/android/general/leagoo-m5-edge-triada-trojan-t3651464 ) .
Hope that with root I could do some manual removing
there is not twrp files...............
if any one want root for this model: https://forum.xda-developers.com/android/development/root-leagoo-m5-edge-magisk-root-t3775758
Gionee M6 Development and Support-
Basic Device Details-
Display- 6 inch
OS- android 6.0
Chipset - mediatek Helio P10
RAM- 4GB
Disclaimer-
Code:
i am not Responsible for any damage to Your Device..
official Firmware- Size 2.19GB
http://www.mediafire.com/file/dd7c8rj9qmkdszd/Gionee_M6_GN8003_MT6755_BBL7515A_T0115.zip
Philz Recovery-
https://goo.gl/aJ28Gb
SP flash tools and Driver-
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Magisk-
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
extras-
Greenify for Battery-
http://m.hiapphere.com/apk-com.oasisfeng.greenify
Guide-
Flash Firmware-
1. Install Vcom Driver Run SP flash tools, Load Scatter File , Check Everything and then click Download, as soon as connect your Switched off Phone.
Flash twrp-
Same as firmware just Check Recovery only, under Recovery section Load twrp and then click Download, as soon as connect your Switched off Phone.
Root-
flash magisk via twrp. or you can also use Supersu 2.78XX.
Mod-
Will be added Soon....:good:
XN Logos said:
Gionee M6 Development and Support-
Basic Device Details-
Display- 6 inch
OS- android 6.0
Chipset - mediatek Helio P10
RAM- 4GB
Disclaimer-
Code:
i am not Responsible for any damage to Your Device..
official Firmware- Size 2.19GB
http://www.mediafire.com/file/dd7c8rj9qmkdszd/Gionee_M6_GN8003_MT6755_BBL7515A_T0115.zip
Philz Recovery-
https://goo.gl/aJ28Gb
SP flash tools and Driver-
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Magisk-
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
extras-
Greenify for Battery-
http://m.hiapphere.com/apk-com.oasisfeng.greenify
Guide-
Flash Firmware-
1. Install Vcom Driver Run SP flash tools, Load Scatter File , Check Everything and then click Download, as soon as connect your Switched off Phone.
Flash twrp-
Same as firmware just Check Recovery only, under Recovery section Load twrp and then click Download, as soon as connect your Switched off Phone.
Root-
flash magisk via twrp. or you can also use Supersu 2.78XX.
Mod-
Will be added Soon....:good:
Click to expand...
Click to collapse
is it working on ( Gionee M6 lite ) ?
Updated 11/13/19
A Collection Of BLU Recoverys
Thanks to all the developers for there work and making them available
There are guides here on XDA from the developers of these recoverys for installing these Recovery's
(Thank them for there work , its not too much to ask)
Your device bootloader will need to be unlocked to install these Recoverys
THIS WILL VOID YOUR WARRANTY and ERASE YOUR DEVICE
BACKUP DATA PRIOR TO UNLOCKING BOOTLOADER
User takes all responsibility for using recoverys
Read and fully understand what is required prior to installing any recovery
It will be YOUR mistake if YOU use instructions that are not fully understood and may brick YOUR device
https://www.mediafire.com/folder/kl47eoi1dnr1p/BLU Recoverys
Advance 4.0L CWM - CTR
Advance 5.0 D030 TWRP
Advance 5.0 HD TWRP
Dash 3.5 D170i CWM
Dash 4.5 TWRP
Dash 5.0 TWRP
Dash X 2 TWRP
Dash X 010U TWRP
Energy X 2 Philz
Energy X LTE TWRP
Energy X Plus TWRP
Energy X TWRP
Energy XL 30UU CWM
Grand 5.5 HD TWRP
Grand Energy G130 TWRP
Grand M TWRP
Grand Max TWRP
Grand Mini TWRP
Life 8 TWRP
Life 8 XL TWRP
Life Max Carliv
Life Max TWRP
Life One 4G TWRP
Life One M Philz CWM
Life One X 2 Mini TWRP
Life One X TWRP
Life One X2 TWRP
Life One X3 TWRP
Life Pure CWM
Life XL TWRP L050U
Life Play 5 TWRP
Life Pure L240A TWRP
Life X 8 TWRP
M4 TWRP
R1 TWRP R0010UU - R0011UU (R0010UU Needs Bootloader Unlocked)
R1 Plus TWRP
Speed 4.7 CWM
Studio 5.0 C HD CWM
Studio 5.0 C Mini Carliv
Studio 5.0 II LTE D532 TWRP
Studio 5.0 LTE Y530U TWRP
Studio 5.5 D610 CWM
Studio 5.5 S CWM
Studio 6.0 HD TWRP
Studio 7.0 II TWRP
Studio C 5+5 TWRP
Studio C HD CWM
Studio C HD S090Q TWRP
Studio Energy 2 TWRP
Studio Energy 2 TWRP
Studio Energy Philz
Studio Energy TWRP
Studio G 2 TWRP
Studio G CTR
Studio G 790Q TWRP
Studio M HD CWM Philz
Studio One TWRP S0110EE
Studio One TWRP S0110UU
Studio Selfie 2 TWRP
Studio Selfie 2 TWRP 3.1.0 , 3.1.1
Studio Selfie TWRP
Studio Touch TWRP
Studio X Plus TWRP
Studio XL 2 CTR
Studio XL 2 TWRP
Tank Xtreme Pro T0010UU TWRP
Vivo 4.65 TWRP
Vivo 5 TWRP MM
Vivo 5R TWRP
Vivo 8 Gionee A1 TWRP
Vivo Air CWM
Vivo Air TWRP
Vivo One TWRP
Vivo XL Gionee S Plus CWM
Vivo XL TWRP
Vivo XL3 Plus TWRP
thanks but:
what twrp version is the blu studio 7.0 II?
does it actually work?
These are files for flash tool not twrp
The 7.0 2 S480L 769 downloads and the S480U 1480 downloads and they are full stock
TWRP can then be flashed for root , ect
Woops , TWRP , it has been downloaded and flashed with spflashtool 79 times with no complaints but it is your device if you decide to use it , backup all data as it will wipe device
donnasbrt1 said:
These are files for flash tool not twrp
The 7.0 2 S480L 769 downloads and the S480U 1480 downloads and they are full stock
TWRP can then be flashed for root , ect
Click to expand...
Click to collapse
thanks for that but there is not TWRP for the blu studio 7.0 II
https://www.mediafire.com/folder/tjf2f3f8mgzw8/Studio 7.0 II TWRP
https://www.mediafire.com/folder/kl47eoi1dnr1p/BLU Recoverys
donnasbrt1 said:
https://www.mediafire.com/folder/tjf2f3f8mgzw8/Studio 7.0 II TWRP
Click to expand...
Click to collapse
Thanks!!!!!
I think it will work but I don't wanna screw up things.
It took forever to find those files (since 2020)
Stock flash file here
https://www.mediafire.com/folder/y1h09d4dhjxb3/Studio 7.0 II S480U - S480L
You can test TWRP and if there is any issue simply flash stock recovery from stock file above to recover
Once you have TWRP you can either flash Super SU , or you can use system image in the above to patch Magisk SU and flash system to device , either way you get root
With Magisk you can also flash Xposed and customize alot
um, sorry if i really annoy but:
i have usb debugging enabled.
i connect it to the pc.
the moment when i do adb-devices it does not apear anything
in the blu, it does not appear anything, nothing about usb debugging or transfer.
does it need a special driver?
at this point i am just gonna make another post.
Are you on windows 10 by chance
yes, windows 10 on latest version
i have another computer with linux mint 20.3 xfce
Windows 10 does not play nice with BLU devices , odd but true , what I would do is download SP Flashtool and use the scatter file and recovery image and flash recovery thru flashtool then patch system image with Magisk and flash system image , flashtool will flash recovery and system without the need to use fastboot to flash
last stupid question
i googled "download sp flash tools" and there are more than 10 "official" sites for sp flashtool
where do i download it? (this is the first time that i install twrp on something)
Ha , there are no stupid questions
SP_Flash_Tool_v5.1436.00.000
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
This link is SP Flashtool
To flash device you need to power off device , hold power button and either volume up , or power button and volume down and then plug usb into device , it takes a few trys sometimes but you will see flash tool load and progress bar on bottom showing flash , then on first boot use volume up and power button to boot to TWRP , if you dont recovery will be over written and you will boot to stock recovery , first boot into TWRP , MAKE A BACKUP OF ENTIRE SYSTEM IN CASE YOU NEED TO RESTORE ,
The only files you need to load in flash tool are scatter and recovery image , do not select whole flash , do not select wipe and flash , select upgrade and only scatter and recovery img downloaded , make sure all other slots are not checked
Make a backup first boot into TWRP , MAKE A BACKUP, not having one will make it difficult to restore and a backup will retain IMEI if required
i didn't unlock bootloader. since i can't use adb, i can't unlock bootloader. (i think that my blu has the unlocked bootloader default (not found a oem unlocking option in developers settings)
i can take a virtual machine running windows xp/7/8.1 and run adb, but connecting it would be difficult
donnasbrt1 said:
Ha , there are no stupid questions
SP_Flash_Tool_v5.1436.00.000
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
This link is SP Flashtool
To flash device you need to power off device , hold power button and either volume up , or power button and volume down and then plug usb into device , it takes a few trys sometimes but you will see flash tool load and progress bar on bottom showing flash , then on first boot use volume up and power button to boot to TWRP , if you dont recovery will be over written and you will boot to stock recovery , first boot into TWRP , MAKE A BACKUP OF ENTIRE SYSTEM IN CASE YOU NEED TO RESTORE ,
Click to expand...
Click to collapse
when i use power+volume up it goes to android recovery
when i use power+ volume down it turns off and when it boot it boots into safe mode.
i saw a option called "fastboot mode" on the recovery menu, ¿and does it work?
it seems imposible to install twrp into my device.
Power off device , hold volume down and plug in usb , I would suggest leaving usb in phone and plug into pc , when flashtool sees device flash will start